Commit graph

691,473 commits

Author SHA1 Message Date
Paul E. McKenney
b163760e37 rcu: make CPU stall warning timeout configurable
Also set the default to 60 seconds, up from the previous hard-coded timeout
of 10 seconds.  This allows people who care to set short timeouts, while
avoiding people with unusual configurations (make randconfig!!!) from being
bothered with spurious CPU stall warnings.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:02 -07:00
Tetsuo Handa
4221a9918e Add RCU check for find_task_by_vpid().
find_task_by_vpid() says "Must be called under rcu_read_lock().". But due to
commit 3120438 "rcu: Disable lockdep checking in RCU list-traversal primitives",
we are currently unable to catch "find_task_by_vpid() with tasklist_lock held
but RCU lock not held" errors due to the RCU-lockdep checks being
suppressed in the RCU variants of the struct list_head traversals.
This commit therefore places an explicit check for being in an RCU
read-side critical section in find_task_by_pid_ns().

  ===================================================
  [ INFO: suspicious rcu_dereference_check() usage. ]
  ---------------------------------------------------
  kernel/pid.c:386 invoked rcu_dereference_check() without protection!

  other info that might help us debug this:

  rcu_scheduler_active = 1, debug_locks = 1
  1 lock held by rc.sysinit/1102:
   #0:  (tasklist_lock){.+.+..}, at: [<c1048340>] sys_setpgid+0x40/0x160

  stack backtrace:
  Pid: 1102, comm: rc.sysinit Not tainted 2.6.35-rc3-dirty #1
  Call Trace:
   [<c105e714>] lockdep_rcu_dereference+0x94/0xb0
   [<c104b4cd>] find_task_by_pid_ns+0x6d/0x70
   [<c104b4e8>] find_task_by_vpid+0x18/0x20
   [<c1048347>] sys_setpgid+0x47/0x160
   [<c1002b50>] sysenter_do_call+0x12/0x36

Commit updated to use a new rcu_lockdep_assert() exported API rather than
the old internal __do_rcu_dereference().

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:02 -07:00
Lai Jiangshan
394f99a900 rcu: simplify the usage of percpu data
&percpu_data is compatible with allocated percpu data.

And we use it and remove the "->rda[NR_CPUS]" array, saving significant
storage on systems with large numbers of CPUs.  This does add an additional
level of indirection and thus an additional cache line referenced, but
because ->rda is not used on the read side, this is OK.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:01 -07:00
Lai Jiangshan
e546f485e1 rcutorture: add random preemption
Add random preemption to help we to torture the preemptable rcu.

srcu_read_delay() also calls rcu_read_delay() for shorter delays.

Added comment to preempt_schedule() call indicating that no quiescent
states happen if preemption is disabled.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:01 -07:00
Paul E. McKenney
84483ea42c rcu: add shiny new debug assists to Documentation/RCU/checklist.txt
Add a section describing PROVE_RCU, DEBUG_OBJECTS_RCU_HEAD, and
the __rcu sparse checking to the RCU checklist.

Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:01 -07:00
Arnd Bergmann
4b6a2872a2 kvm: add __rcu annotations
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:01 -07:00
Arnd Bergmann
0906a372f2 net/netfilter: __rcu annotations
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:01 -07:00
Arnd Bergmann
2be8527928 input: __rcu annotations
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:01 -07:00
Arnd Bergmann
5b22216e11 nfs: __rcu annotations
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-19 17:18:00 -07:00
Arnd Bergmann
e63ba744a6 keys: __rcu annotations
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:00 -07:00
Arnd Bergmann
1b0ba1c903 credentials: rcu annotation
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:00 -07:00
Arnd Bergmann
2c392b8c34 cgroups: __rcu annotations
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:00 -07:00
Arnd Bergmann
67bdbffd69 rculist: avoid __rcu annotations
This avoids warnings from missing __rcu annotations
in the rculist implementation, making it possible to
use the same lists in both RCU and non-RCU cases.

We can add rculist annotations later, together with
lockdep support for rculist, which is missing as well,
but that may involve changing all the users.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:00 -07:00
Paul E. McKenney
ca5ecddfa8 rcu: define __rcu address space modifier for sparse
This commit provides definitions for the __rcu annotation defined earlier.
This annotation permits sparse to check for correct use of RCU-protected
pointers.  If a pointer that is annotated with __rcu is accessed
directly (as opposed to via rcu_dereference(), rcu_assign_pointer(),
or one of their variants), sparse can be made to complain.  To enable
such complaints, use the new default-disabled CONFIG_SPARSE_RCU_POINTER
kernel configuration option.  Please note that these sparse complaints are
intended to be a debugging aid, -not- a code-style-enforcement mechanism.

There are special rcu_dereference_protected() and rcu_access_pointer()
accessors for use when RCU read-side protection is not required, for
example, when no other CPU has access to the data structure in question
or while the current CPU hold the update-side lock.

This patch also updates a number of docbook comments that were showing
their age.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Christopher Li <sparse@chrisli.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:17:59 -07:00
Paul E. McKenney
d34a16661e net: convert to rcu_dereference_index_check()
The task_cls_classid() function applies rcu_dereference() to integers,
which does not work with the shiny new sparse-based checking in
rcu_dereference().  This commit therefore moves to the new RCU API
rcu_dereference_index_check().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-08-19 17:17:59 -07:00
Changli Gao
b9959c2e44 net_sched: sch_sfq: use proto_ports_offset() to support AH message
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 17:16:25 -07:00
Changli Gao
aca071c1c1 netfilter: xt_hashlimit: use proto_ports_offset() to support AH message
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 17:16:25 -07:00
Changli Gao
3d04ebb6ab netfilter: ipt_CLUSTERIP: use proto_ports_offset() to support AH message
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 17:16:24 -07:00
Changli Gao
78d3307ede net_sched: cls_flow: use proto_ports_offset() to support AH message
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 17:16:24 -07:00
Changli Gao
12fcdefb36 net: rps: use proto_ports_offset() to handle the AH message correctly
The SPI isn't at the beginning of an AH message.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 17:16:23 -07:00
Changli Gao
e760702ed8 net: introduce proto_ports_offset()
Introduce proto_ports_offset() for getting the position of the ports or
SPI in the message of a protocol.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 17:16:23 -07:00
Changli Gao
dbe5775bbc net: rps: skip fragment when computing rxhash
Fragmented IP packets may have no transfer header, so when computing
rxhash, we should skip them.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 17:10:38 -07:00
Changli Gao
2d47b45951 net: rps: reset network header before calling skb_get_rxhash()
skb_get_rxhash() assumes the network header pointer of the skb is set
properly after the commit:

commit bfb564e739
Author: Krishna Kumar <krkumar2@in.ibm.com>
Date:   Wed Aug 4 06:15:52 2010 +0000

    core: Factor out flow calculation from get_rps_cpu

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 17:08:37 -07:00
David S. Miller
48d3ff8269 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2010-08-19 16:54:13 -07:00
Amit Kumar Salecha
91fe8173be qlcnic: update version 5.0.8
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:52:43 -07:00
Sucheta Chakraborty
091754a165 qlcnic: rom lock recovery
Fw can get stuck while holding pci semaphore. Driver will not
be able to perform fw initialization, without this lock.
Release semaphore forcefully in that case.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:52:42 -07:00
Sony Chacko
d4066833bb qlcnic: firmware initialization update
Cleanup legacy code which is not valid for Qlogic
CNA adapters.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:52:42 -07:00
Amit Kumar Salecha
63e74e9cb7 qlcnic: fix endiness in eswitch statistics
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:52:41 -07:00
Amit Kumar Salecha
21854f029d qlcnic: mark device state as failed
Mark device state failed in error path.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:52:41 -07:00
Amit Kumar Salecha
78f84e1a70 qlcnic: fix npar state
Privilege functions should wait for npar state to be operational.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:52:40 -07:00
Sony Chacko
fe4d434da8 qlcnic: support anti mac spoofing
Administrator can configure to drop packet in transmit,
if it doesn't match interface mac address, in case of virtual function.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:52:40 -07:00
Rajesh Borundia
0325d69b2a qlcnic: configure offload setting on eswitch
Device is not capable of enabling/disabling offload setting per
port in case of Nic Partition.So offload settings needs to be
enabled/disabled per eswitch and it will affect all the function
on that eswitch.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:52:39 -07:00
Rajesh Borundia
4e8acb011f qlcnic: configure port on eswitch
o Nic partition capable devices has embedded switch, this needs to support
various features like external switch.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:52:38 -07:00
Sony Chacko
251b036a22 qlcnic: replace magic numbers with defines
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:52:38 -07:00
Sony Chacko
39895e07ca qlcnic: remove unused code
Serial number references are not used in driver.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:52:37 -07:00
Amit Kumar Salecha
f1bf7a5247 qlcnic: fix inconsistent lock state
Spin_lock(rds_ring->lock) is not required while posting buffers
from qlcnic_open and freeing buffers from qlcnic_down.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:52:37 -07:00
Alexander Duyck
84418e3b10 ixgbe: rewrite ethtool test to use standard config functions
This change makes it so that the ethtool loopback test uses the standard
ring configuration and allocation functions.  As a result the loopback test
will be much more effective at testing core driver functionality.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:45:28 -07:00
Alexander Duyck
31f05a2d87 ixgbe: update all DESC_ADV macros to accept a ring pointer
All of the DESC_ADV macros are currently needing the pointers to be
de-referenced before accessing the ring.  Instead of having to add all of
the asterisks it is easier to just update the macro to expect a pointer to
the ring.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:44:27 -07:00
Alexander Duyck
9e10e045f8 ixgbe: combine Rx into into ixgbe_configure_rx
The Rx init is currently split over ixgbe_configure, ixgbe_configure_rx,
and ixgbe_up_complete.  Instead of leaving it split over 3 function it is
easier to consolidate them all into ixgbe_configure_rx.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:44:26 -07:00
Alexander Duyck
2f1860b8d9 ixgbe: pull all Tx init into ixgbe_configure_tx
The Tx init was spread out over ixgbe_configure, ixgbe_configure_tx, and
ixgbe_up_complete.  This change combines all of that into the
ixgbe_configure_tx function in order to simplify the Tx init path.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:44:25 -07:00
Alexander Duyck
a34bcfffae ixgbe: move all GPIE register config into a single function
This change moves all GPIE register configuration into a single function.
The advantage of this is that we can avoid a number of unnecessary
read/modify/write cycles on the register.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:44:25 -07:00
Alexander Duyck
f5b4a52e81 ixgbe: Move virtualization config into a separate function
This change moves the configuration that was done in configure_rx into a
separate virtualization configuration function.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:44:24 -07:00
Alexander Duyck
7367096a43 ixgbe: move all Rx DMA control register writes to one central location
This change moves all of the Rx DMA control register writes to one central
location.  This should help to avoid accidentally overwriting existing
settings.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:44:24 -07:00
Alexander Duyck
477de6ed02 ixgbe: Move max frame size and Rx buffer length configuration into a function
This change consolidates all of the Rx max frame size and Rx buffer length
configuration into a single function.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:44:23 -07:00
Alexander Duyck
826437d3de ixgbe: remove redundant configuration of vmolr, rename generic variable
The vmolr is configured already in ixgbe_set_rx_mode for the PF so there is
no need to set it again in ixgbe_configure_rx.

Instead of using the variable name reg, it is easier to just rename it to
gcr_ext to reflect the register contents that the variable holds.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:44:22 -07:00
Alexander Duyck
1395807091 ixgbe: bump PS header size to 512 bytes
Bump the header size for packet split to 512 bytes since this makes the
best use of the 1k buffer that is allocated for any skb 512 bytes or
smaller.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:44:22 -07:00
Alexander Duyck
f5dc442b46 ixgbe: combine accesses to FCTRL register into ixgbe_set_rx_mode
We are accessing the FCTRL register in multiple spots in the init path and
we can simplify things by combining the configuration all into
ixgbe_set_rx_mode.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:40:52 -07:00
Alexander Duyck
4865452164 ixgbe: pull PSRTYPE configuration into a separate function
The configuration of PSRTYPE was being done conditionally on if packet
split is enabled or not.  It can be configured always since it will not
have any effect when packet split is not enabled.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:40:51 -07:00
Alexander Duyck
acd37177cc ixgbe: pull ring configuration into it's own function
These changes add ixgbe_configure_rx_ring which is used to setup the base
function pointers for the ring.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:40:51 -07:00
Alexander Duyck
05abb126c1 ixgbe: consolidate all setting of MRQC into one function
This change simplifies the configuration of MRQC by consolidating the
setting of it into one function. As such the register is no longer set in
multiple places which should make any future changes easier to work with.
In addition we can combine RSS related register writes into the call since
enabling all of those bits without enabling RSS itself in MRQC should have
no effect.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 16:40:50 -07:00