When parsing the radiotap header of an injected frame,
ieee80211_parse_tx_radiotap() uses the IEEE80211_RADIOTAP_ANTENNA value
directly as a shift count:
info->control.antennas |= BIT(*iterator.this_arg);
*iterator.this_arg is an 8-bit value taken straight from the frame
supplied by userspace, so BIT() can be asked to shift by up to 255. That
is undefined behaviour on the unsigned long and is reported by UBSAN:
UBSAN: shift-out-of-bounds in net/mac80211/tx.c:2174:30
shift exponent 235 is too large for 64-bit type 'unsigned long'
Call Trace:
ieee80211_parse_tx_radiotap+0xadb/0x1950 net/mac80211/tx.c:2174
ieee80211_monitor_start_xmit+0xb1f/0x1250 net/mac80211/tx.c:2451
...
packet_sendmsg+0x3eb6/0x50f0 net/packet/af_packet.c:3109
info->control.antennas is a 2-bit bitmap (u8 antennas:2), so only antenna
indices 0 and 1 can ever be represented. Ignore any larger value instead
of shifting out of bounds.
Reported-by: syzbot+8e0622f6d9446420271f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8e0622f6d9446420271f
Fixes: ef246a1480 ("wifi: mac80211: support antenna control in injection")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Link: https://patch.msgid.link/20260531011721.102941-1-kartikey406@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we try to assign a chanctx to a link, if
ieee80211_find_or_create_chanctx() failed, we try to evacuate a NAN
channel and call it again.
This logic is broken:
In case there are not enough chanctxs we will fail earlier,
when we check ieee80211_check_combinations().
To fix this, do the following in case ieee80211_check_combinations()
failed:
- check if there is a NAN channel that can be evacuated
- make ieee80211_check_combinations() not consider the chanctx of that NAN
channel, so we pretend that it was already evacuated
- If now ieee80211_check_combinations() is successful, we know that it
helped, and we can remove that NAN channel for real.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260527224745.5f7b10505145.I1712bc64f9eec9c99f05994208ad124624a29f1c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sometimes, ieee80211_check_combinations fails, but it is hard to know
why exactly. We will have to return an array of reasons, one per
combination.
In cases where we want to check if it failed because there are not
enough chanctxs (and maybe remove one if needed), we can just not fill
in that chanctx(s) in iface_combination_params::num_different_channels
in ieee80211_fill_ifcomb_params, so that chanctx(s) won't be taken into
account.
To allow that, add an option to pass a callback to
ieee80211_fill_ifcomb_params. This callback will be called for each
chanctx we consider to count in num_different_channels and will return
whether or not this chanctx should be skipped and not counted.
This mechanism will be used later.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260527224745.0042232f996e.I5d323125e34f3b253510e85ceb7a770d59f689fb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add KUnit coverage for ieee80211_parse_neg_ttlm() to lock the sparse
link_map_presence layout against future regressions.
The sparse_presence_no_oob_read case crafts a negotiated TTLM element
with link_map_presence = BIT(0) | BIT(7) and bm_size = 2 in a buffer
sized exactly to the validated element length. Without the parser
fix this would read 14 bytes past the buffer when processing TID 7;
under KASAN that is a slab-out-of-bounds report.
The dense_presence_baseline case crafts a fully populated
link_map_presence = 0xff element to confirm that the cursor-advance
fix does not regress the path that was already correct.
Export ieee80211_parse_neg_ttlm via VISIBLE_IF_MAC80211_KUNIT so the
test can call it directly.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260515151719.1317659-3-michael.bommarito@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- mac80211/hwsim:
- some NAN related things
- MCS/NSS rate issues with S1G
- p54: port SPI version to device-tree
- (a few other random things)
-----BEGIN PGP SIGNATURE-----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=XLqG
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Not much going on here right now:
- mac80211/hwsim:
- some NAN related things
- MCS/NSS rate issues with S1G
- p54: port SPI version to device-tree
- (a few other random things)
* tag 'wireless-next-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next:
ARM: dts: omap2: add stlc4560 spi-wireless node
p54spi: convert to devicetree
dt-bindings: net: add st,stlc4560/p54spi binding
wifi: mac80211: allow cipher change on NAN_DATA interfaces
wifi: mac80211_hwsim: Do not declare NAN support for Extended Key ID
wifi: cfg80211: add a function to parse UHR DBE
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
wifi: mac80211: Allow per station GTK for NAN Data interfaces
wifi: mac80211_hwsim: advertise NPCA capability
wifi: mac80211_hwsim: reject NAN on multi-radio wiphys
wifi: plfxlc: use module_usb_driver() macro
wifi: mac80211: don't recalc min def for S1G chan ctx
wifi: mac80211: skip NSS and BW init for S1G sta
wifi: mac80211: check stations are removed before MLD change
wifi: rt2x00: allocate anchor with rt2x00dev
====================
Link: https://patch.msgid.link/20260521153519.380276-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ieee80211_key_link() rejects pairwise key installation when the
cipher differs from the existing PTK. Per Wi-Fi Aware version 4.0
section 7.4, the ND-TKSA between the same NDI pair shall be updated
when a new NDP requires a stronger cipher suite.
Exempt NL80211_IFTYPE_NAN_DATA from the same-cipher enforcement so
the PTK can be replaced with a different cipher.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260515142736.3188a47a23bf.I5fba3a111ffe054b46928aefa5c2d763fef51d4d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case reconfiguration of NAN fails, we call
ieee80211_handle_reconfig_failure, that marks all interfaces as not in
the driver.
Then, at the error path of the reconfig, cfg80211_shutdown_all_interfaces
is called to destroy all the interfaces.
If we have any other interface but the NAN one, for example a BSS
station, then when its state (links, stations) will be removed, we
won't tell the driver about this, because we will think that the
interfaces are not in the driver, and then drivers might remain with
dangling pointers to objects like stations and links (at least for
iwlwifi this is the case).
ieee80211_handle_reconfig_failure is meant to be called after we cleaned
up the state in the driver, there is no reason to call it for NAN
reconfiguration failure.
Fix the code to just warn in such a case, as we do in other error paths
in reconfig where it is too complicated to rewind.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260513182548.6a25f3a0a6ec.I83d1f2a7eed20200a78a62757c6b193e3bab892b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The WiFi Aware specification (v4.0) requires that NAN devices that
support security would also support per station GTK. Thus, allow
per station GTK installation to the driver on NAN Data interfaces.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
tested: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260513172418.37a8e259e611.I39bb9f3c1a65a8184124f531c18e121dc123d411@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
__ieee80211_recalc_chanctx_min_def() currently does not attempt
to find the min def for S1G widths, meaning the BW will never change.
However, the following call into ieee80211_chan_bw_change() will
lead to a WARN within ieee80211_chan_width_to_rx_bw(). Not only that,
this entire path is geared towards 20MHz based channels, so it doesn't
make sense anyway. For now, return early when calculating the mindef
for S1G channels.
Fixes: d879d4da45 ("wifi: mac80211: clean up initial STA NSS/bandwidth handling")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260506131925.2088353-3-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently there is no S1G STA bandwidth support throughout mac80211
as existing support is all based on 20MHz widths. With the recent
STA NSS/BW handling rework, S1G associations now hit the new WARN within
ieee80211_chan_width_to_rx_bw() as the chandef is not a 20MHz based
width. For now, skip initialisating link_sta->pub->bandwidth for
S1G chandefs to avoid the WARN though this should at some point be
properly implemented since there are vendors that offer differing
maximum bandwidths.
Additionally, currently all S1G hardware out there is 1SS so rather
then introducing new parsing code which wouldn't be used anyway, just
initialise the NSS related fields to 1 and skip initialising the STA
bandwidth for S1G chandefs within ieee80211_sta_init_nss_bw_capa().
Fixes: d879d4da45 ("wifi: mac80211: clean up initial STA NSS/bandwidth handling")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260506131925.2088353-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If an interface changes to/from MLD, then all stations related
to it must have been removed first. This is just natural since
we go from having links to not (or vice versa), but not doing
so also causes crashes in debugfs since vif changing to/from
MLD removes the entire debugfs for the vif, including stations.
Delete all stations but warn in this case, other code should
be handling it, in effect fail fast rather than doing a double
free or use-after-free in debugfs.
Link: https://patch.msgid.link/20260505151731.3d7cbb8b952c.I4ce7b536e8af26d7b115e82fd733734446cc56a4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements
against the number of link-map entries indicated by link_map_presence.
ieee80211_parse_neg_ttlm() must consume the same layout.
The parser advanced its cursor for every TID, including TIDs whose
presence bit is clear and therefore have no map bytes in the element.
A sparse map can then make a later present TID read past the validated
element.
The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by
valid_links before being applied to driver state, so a peer cannot
turn the read into a policy change. Under KUnit + KASAN with an
exact-sized element allocation the OOB read is reported as a
slab-out-of-bounds; whether the same trigger fires under the
production RX path depends on surrounding allocator state.
Advance the cursor only when the current TID has a map present.
Fixes: 8f500fbc6c ("wifi: mac80211: process and save negotiated TID to Link mapping request")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260515151719.1317659-2-michael.bommarito@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_invoke_fast_rx() reads RX status through
IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage
that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the
unicast forward path, mesh_data does:
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
on the same skb the caller still names via rx->skb, then either
queues the skb for TX (success) or kfree_skb()'s it (no-route)
before returning RX_QUEUED. The caller's RX_QUEUED arm then
calls sta_stats_encode_rate(status) on memory that is either
zeroed (success path) or freed (no-route path). The latter is
KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.
Fix by encoding the rate from status before invoking
ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value
captured while status was still backed by valid memory.
Fixes: 3468e1e0c6 ("wifi: mac80211: add mesh fast-rx support")
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260509043427.60322-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When parsing a beacon, mac80211 erroneously inherits any
reconfiguration or EPCS multi-link elements from the outer
elements into the multi-BSSID profile that's requested, if
connected to a non-transmitted BSS, unless that profile
has a non-inheritance element.
This also happens if parsing a multi-BSSID profile that
doesn't have a non-inheritance element.
Fix this by having an empty non-inheritance element so
cfg80211_is_element_inherited() is invoked in these cases
and causes the parser to skip the elements that should
never be inherited.
Fixes: cf36cdef10 ("wifi: mac80211: Add support for parsing Reconfiguration Multi Link element")
Fixes: 24711d60f8 ("wifi: mac80211: Support parsing EPCS ML element")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20260508091032.92184c0a3f08.I3c43b0b63d2cef8a4ddddaef1c2faaeb1de711ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If either reconf or EPCS multi-link element (MLE) is contained in
a non-transmitted profile, the defragmentation routine is called
with a pointer to the defragmented copy, but the original elements.
This is incorrect for two reasons:
- if the original defragmentation was needed, it will not find the
correct data
- if the original frame is at a higher address, the parsing will
potentially overrun the heap data (though given the layout of
the buffers, only into the new defragmentation buffer, and then
it has to stop and fail once that's filled with copied data.
Fix it by tracking the container along with the pointer and in
doing so also unify the two almost identical defragmentation
routines.
Fixes: 4d70e9c548 ("wifi: mac80211: defragment reconfiguration MLE when parsing")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20260508091031.8a6c34613178.I4de16ebbce2d27f2f8f98fc49949c7a376c2fe8d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In client mode, the extended capabilities are handled by the kernel
looking at the association frame. When the supplicant installs the keys
it calls sta_apply_parameters and it doesn't include the extended
capabilities since those can't change after association.
As a result, we overrode the max_amsdu_subframes that we set after
association.
Check that the ext_capa coming from the user space is valid before
looking at it. If the ext_capa is NULL, it really means that the
extended capabilities are not changed (as opposed to cleared).
The default value for max_amsdu_subframes is 0, which means there is no
limit. This value is valid and in case the association response frame
does not have extended capabilities, this is the value we should use.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221079
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260513170623.828dbb58c782.Ifd2bfc190c26140e919127adb02ffddd7b551499@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted
from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15.
sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14),
making index 15 out-of-bounds.
A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response
action frame with a PER_STA_PROFILE subelement where link_id = 15. The
unsolicited-notification path (dialog_token = 0) is reachable any time
EPCS is already enabled, without any prior client request.
sdata->link[15] reads into the first word of sdata->activate_links_work
(a wiphy_work whose embedded list_head is non-NULL after INIT_LIST_HEAD),
so the NULL check on the result does not catch the invalid access. The
garbage pointer is then passed to ieee80211_sta_wmm_params(), which
dereferences link->sdata and crashes the kernel.
The same class of bug was fixed for ieee80211_ml_reconfiguration() by
commit 162d331d83 ("wifi: mac80211: bounds-check link_id in
ieee80211_ml_reconfiguration").
Fixes: de86c5f608 ("wifi: mac80211: Add support for EPCS configuration")
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Link: https://patch.msgid.link/20260515102908.1653088-1-hossu.alexandru@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If connection preparation fails for MLO connections, then the
interface is completely reset to non-MLD. In this case, we must
not keep the station since it's related to the link of the vif
being removed. Delete an existing station. Any "new_sta" is
already being removed, so that doesn't need changes.
This fixes a use-after-free/double-free in debugfs if that's
enabled, because a vif going from MLD (and to MLD, but that's
not relevant here) recreates its entire debugfs.
Cc: stable@vger.kernel.org
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260505151533.c4e52deb06ad.Iafe56cec7de8512626169496b134bce3a6c17010@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, as noted in the comment, ieee80211_uhr_oper_size_ok()
will reject the element coming from the beacon, since it's too
short. However, this is incorrect in general, since the element
is extensible, and such extensions could be present in a beacon,
and then it might pass muster anyway.
Using the frame type we now have in the element parse result,
check that it's not coming from a beacon. The size was already
checked (according to frame type) during parsing.
Link: https://patch.msgid.link/20260428112708.41a7aacdda0c.I0d83c8c9cbee41fd2599480cad815b94867aa1f8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When considering both NPCA and DBE, it can appear that the
NPCA configuration is invalid, e.g. for an 80 MHz BSS channel
with DBE to 160 MHz:
| primary channel
| NPCA primary channel
| |
V V
| p | | n | | | | | |
| BSS channel |
| DBE channel |
Now the NPCA primary channel is in the same half as the primary
channel, and the NPCA puncturing bitmap could be completely
invalid as a puncturing bitmap when considering the overall
channel.
Split out the validity checks from cfg80211_chandef_valid() to
a new cfg80211_chandef_npca_valid() function that just checks
the NPCA configuration against the BSS chandef.
Link: https://patch.msgid.link/20260428112708.1225df131557.If3a6afadcce05d215b72fd82175f72373a0f6d24@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the device is capable, parse the AP chandef with NPCA.
Also advertise the other NPCA operational parameters to the
underlying driver and track if they change (though not with
BSS critical update etc. yet)
Since NPCA can only be enabled when the chanctx isn't shared,
the channel context code needs to clear/set npca.enabled in
the per-link configuration, except during association since
we can't enable NPCA before having completed association. In
this case, set npca.enabled during the association process.
Link: https://patch.msgid.link/20260428112708.eb1e42c0b6d7.I0acd8445d4600363afb8430922531450399d0fab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When two interfaces share a channel context, disable NPCA
unless both are AP interfaces that require NPCA. This way,
two AP interfaces can have identical chandefs set up and
share the channel context, but any non-APs cannot share a
chanctx with NPCA (they'd almost certainly have different
BSS color.)
This doesn't mean the chanctx cannot be shared but rather
that NPCA will be disabled on the shared channel context.
Link: https://patch.msgid.link/20260428112708.3832e15f4e78.I08a7c7f47d796f4d5d8f9a682c1fba37db2e4cf5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Put the NPCA parameters into a chandef when parsing data from
the AP to validate them using the cfg80211 code, rather than
implementing that in mac80211 directly.
Note that the parameters are not applied yet, since mac80211
doesn't yet have NPCA support.
Link: https://patch.msgid.link/20260428112708.418e86f9444c.I54430f3018e39a26b4252d71000d7bb7dd744331@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since 802.11bn D1.4 the DBE capabilities are after the
PHY capabilities, not between MAC and PHY, adjust the
code accordingly.
Also add a struct for DBE capabilities and use it for
checking the correct length instead of hard-coding the
lengths.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260428103657.b40af50f182d.I75306a092dc2c8a9eb7276160f0b7144b4846d18@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The interface frame queue processing code currently
differentiates many frame types and below those the
interface types, but then falls through to per-type
processing. Move this code to the per-type functions,
creating a new ap.c file that gets relevant code, and
this way reduce the number of non-static symbols.
This also helps with adding more cases for UHR later.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260428103649.c00059e68a07.I2269130278390f534d6051fac424402a854a54aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new wdev-only interface type NL80211_IFTYPE_PD to support
Proximity Detection (PD) operations such as PASN and peer measurement
operations. This interface type operates without a netdev, similar to
P2P_DEVICE and NAN interfaces.
Implement support across cfg80211 and mac80211 layers with PD-specific
checks gated by the NL80211_EXT_FEATURE_SECURE_RTT feature flag,
management frame registration and transmission capabilities, and proper
channel context handling where PD interfaces are excluded from bandwidth
calculations. Update mac80211 to recognize the new interface type in the
relevant paths for this management-only interface.
PD discovery can be performed on any available interface, such as
NL80211_IFTYPE_STATION.
If PD/PMSR uses the MAC address of an existing interface type, such as
NL80211_IFTYPE_STATION, then pairing and measurement shall use that
same interface. If PD/PMSR uses a different MAC address, such as a
random MAC address, then pairing and measurement can be performed on a
new NL80211_IFTYPE_PD interface created with that random MAC address.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-4-peddolla.reddy@oss.qualcomm.com
[fix comment style]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the remain_on_channel operation does not support
filtering incoming frames by destination MAC address. This
prevents use cases such as PASN authentication in the
responder side that need to receive frames addressed to a
specific MAC during the off-channel period.
Add an rx_addr parameter to the remain_on_channel operation
callback and propagate it through the call chain from nl80211
to driver implementations. Introduce the extended feature
NL80211_EXT_FEATURE_ROC_ADDR_FILTER as a capability gate so
that cfg80211 rejects the request if the driver does not
advertise support for address filtering. Extract the address
from the NL80211_ATTR_MAC attribute when provided in the
netlink message and update the tracing infrastructure to
include the address in remain_on_channel trace events. The
rx_addr parameter is optional and can be NULL, maintaining
backward compatibility with existing drivers.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-3-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A NAN channel can be evacuated, i.e. detached from its chanctx, if all
chanctxs are used by NAN and a chanctx is needed for something else.
For example if the STA interface needs to perform a channel switch.
Implement the evacuation: detach the NAN channel from its chanctx, remove
all the peer NAN channels that were using this chanctx, and update the
driver.
Internally, the NAN channel evacuation will be triggered in the scenario
described above, and API is provided for the driver to also trigger it.
The driver/device is assumed to publish a ULW to notify the peers about
the fact that we won't be present on this NAN channel anymore.
Also export this as an API for the drivers: if a driver has other
resources per channel, it might want to trigger channel evacuation in
order to free up such internal resources for other usages.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.1e1dc40d2f3e.I003fe84dc6373bb9ad55abd7824b9fc21c51203f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In NAN, we don't know on what band the frame will be sent. Therefore we
set info->band to NUM_NL80211_BANDS. However, this leads to out-of-bound
access in ieee80211_add_tx_radiotap_header when we try to access the
sbands array.
Fix it by not accessing the array if the band is NUM_NL80211_BANDS.
This means that we will not report rate info for legacy rate in NAN.
But nobody really cares about it.
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.346c9893d136.I15919027597c04ec35c6217db6e52e2a605e5cfc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
skb->dev may be NULL for frames on non-netdev devices. For example, NAN
device frames after pairing. Fix it.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504072055.1292999-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow setting the interface MAC address for NAN Device interfaces
and P2P Device interfaces on interface creation.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.d268b245037b.I351e16270c34ee734fed98da25db848211ab7cc2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some frames sent to the NAN device may be protected, such as
protected action frames (in particular protected dual of
public action).
Accept robust management frames except disassoc on the NAN
device, and clean up the code a little bit.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.1900c926c2e8.Ia25b2e82b250058fefa179c39327d9c8b3c3cd62@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow TX/RX of action frames (for NAN action frames) over
NAN Data interfaces to support cases where there's a secure
NDP and NAFs may be exchanged over that.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.4ac207c60ebb.Ic4b1c90552497b7ff2616651a408e5fe8bde7b99@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, we store in nan.conf the cluster id that was configured from
upper layer to be used when the device opens a cluster.
But after we joined a cluster, the configured cluster id is no longer
relevant. Particularly, in reconfig we will give the driver the
(possibly) wrong cluster id.
Add an API to be called by the driver when joined a cluster
in which the cluster id will be updated.
Use the locally stored cluster id instead of cfg80211's copy.
Ignore cluster id updates from cfg80211 if we already have one
configured.
Adjust the drivers that use the cfg80211 API
(cfg80211_nan_cluster_joined) directly, otherwise we break functionality
(i.e. accept frame check won't evaluate to true).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.5dada1b756a4.I0f1060215267fd8aef31afd99f8f42e6fde7f234@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Populate the assoc_encrypted field in cfg80211_rx_assoc_resp_data
for mac80211-based drivers to indicate that the entire (re)association
exchange was encrypted.
When epp_peer is set, mac80211 enforces that unprotected
(Re)Association Request/Response frames are dropped. This ensures that
by the time the (Re)Association Response is processed, the entire
exchange was transmitted encrypted over the air.
Add support to populate assoc_encrypted based on epp_peer flag.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504123624.529218-3-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>