mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-13 07:31:07 +00:00
35,788 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
0cbe10470b |
Char/Misc/IIO driver fixes for 6.13-rc7
Here are a bunch of small IIO and interconnect and other driver fixes
for 6.13-rc7 to resolve reported issues. Included in here are:
- loads of iio driver fixes as a result of an audit of places where
uninitialized data would leak to userspace.
- other smaller, and normal, iio driver fixes.
- mhi driver fix
- interconnect driver fixes
- pci1xxxx driver fix
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ4PK3g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymClACgyFB9Ce/jlUWUKvX1eCY9xWVMrmwAoMe0nrLG
a2lNOpIQM5K+P7iGz4cT
=Yq71
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a bunch of small IIO and interconnect and other driver fixes
to resolve reported issues. Included in here are:
- loads of iio driver fixes as a result of an audit of places where
uninitialized data would leak to userspace.
- other smaller, and normal, iio driver fixes.
- mhi driver fix
- interconnect driver fixes
- pci1xxxx driver fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (32 commits)
misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set config
misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling
interconnect: icc-clk: check return values of devm_kasprintf()
interconnect: qcom: icc-rpm: Set the count member before accessing the flex array
iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
iio: temperature: tmp006: fix information leak in triggered buffer
iio: inkern: call iio_device_put() only on mapped devices
iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
iio: adc: at91: call input_free_device() on allocated iio_dev
iio: adc: ad7173: fix using shared static info struct
iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
iio: adc: ti-ads1119: fix information leak in triggered buffer
iio: pressure: zpa2326: fix information leak in triggered buffer
iio: adc: rockchip_saradc: fix information leak in triggered buffer
iio: imu: kmx61: fix information leak in triggered buffer
iio: light: vcnl4035: fix information leak in triggered buffer
iio: light: bh1745: fix information leak in triggered buffer
iio: adc: ti-ads8688: fix information leak in triggered buffer
iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
iio: test: Fix GTS test config
...
|
||
|
Linus Torvalds
|
e0daef7de1 |
drm fixes for 6.13-rc7
i915: - Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link" amdgpu: - Display interrupt fixes - Fix display max surface mismatches - Fix divide error in DM plane scale calcs - Display divide by 0 checks in dml helpers - SMU 13 AD/DC interrrupt handling fix - Fix locking around buddy trim handling amdkfd: - Fix page fault with shader debugger enabled - Fix eviction fence wq handling xe: - Avoid a NULL ptr deref when wedging - Fix power gate sequence on DG1 mediatek: - Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing" - Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err - Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb() - Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported - Add support for 180-degree rotation in the display driver - Stop selecting foreign drivers - Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()" - Fix YCbCr422 color format issue for DP - Fix mode valid issue for dp - dp: Reference common DAI properties - dsi: Add registers to pdata to fix MT8186/MT8188 - Remove unneeded semicolon - Add return value check when reading DPCD - Initialize pointer in mtk_drm_of_ddp_path_build_one() -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmeBgCcACgkQDHTzWXnE hr4nyBAAoCqMYKiSQjvsLyPrbU7ZzrGd+k8ltpCJcTXsIH7RdaxD8xU2ExpxxOnT EBOIyj7xfHaDVadLfn7Mm0ENyZYtu9DEyBLQk6hiVSY4TR4gan+MyD7XAv8kza3r q6uQ2Tx2ukJ35yka4OMOlXguSm/sKx+o37eI4w4BEtgZUxB4FmwOSEj6tHPDplsN ECNrsAnfOxWpalKPiREnar1FR1Dwon6Yi8NacgW9XY6VpOafwPP+n1eESJuhAnOO bYQRFEvFAzeS5zUvBhC7VtM70yYHK67rMZeixIqhv/YIrUNRkhcyJk6nLuVu063E qIRPacEdt7i20YfjGZqMY0O5d+tsAatZNW1z/rRtOSys9COAq/vion/n+6i3+cvm 3lRSutqFfI+uAtfIAkf4S5xspeTpSCHqXpkndKm1NbFb0G7o4ea5q/liUO2Pf+J4 wdMuqUX2pFFEAjw53spVJE3YwZx3uzBwik6w+/pxfVKFJcAsUfqpYhZIrGSXnDpo tEcaSbdCid2EhUE72se9/AxS6WcEGHWLHVTlZIXNK56jWvtQqvrar5u1q4hkIR0Z oc0zovhRN3+XwHvZZQpBxqoQJwCVc5B0/sdjDtoUyDMVSdye235TpG88xAE7TPmR XV3s6ML2MtiaGlvCEemD63vmn97AxYAgJTM3xHvDW/e61g0+Eqk= =AgUd -----END PGP SIGNATURE----- Merge tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernel Pull drm fixes from Dave Airlie: "Regular weekly fixes, this has the usual amdgpu/xe/i915 bits. There is a bigger bunch of mediatek patches that I considered not including at this stage, but all the changes (except for one were obvious small fixes, and the rotation one is a few lines, and I suppose will help someone have their screen up the right way), I decided to include it since I expect it got slowed down by holidays etc, and it's not that mainstream a hw platform. i915: - Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link" amdgpu: - Display interrupt fixes - Fix display max surface mismatches - Fix divide error in DM plane scale calcs - Display divide by 0 checks in dml helpers - SMU 13 AD/DC interrrupt handling fix - Fix locking around buddy trim handling amdkfd: - Fix page fault with shader debugger enabled - Fix eviction fence wq handling xe: - Avoid a NULL ptr deref when wedging - Fix power gate sequence on DG1 mediatek: - Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing" - Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err - Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb() - Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported - Add support for 180-degree rotation in the display driver - Stop selecting foreign drivers - Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()" - Fix YCbCr422 color format issue for DP - Fix mode valid issue for dp - dp: Reference common DAI properties - dsi: Add registers to pdata to fix MT8186/MT8188 - Remove unneeded semicolon - Add return value check when reading DPCD - Initialize pointer in mtk_drm_of_ddp_path_build_one()" * tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernel: (26 commits) drm/xe/dg1: Fix power gate sequence. drm/xe: Fix tlb invalidation when wedging Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link" drm/amdgpu: Add a lock when accessing the buddy trim function drm/amd/pm: fix BUG: scheduling while atomic drm/amdkfd: wq_release signals dma_fence only when available drm/amd/display: Add check for granularity in dml ceil/floor helpers drm/amdkfd: fixed page fault when enable MES shader debugger drm/amd/display: fix divide error in DM plane scale calcs drm/amd/display: increase MAX_SURFACES to the value supported by hw drm/amd/display: fix page fault due to max surface definition mismatch drm/amd/display: Remove unnecessary amdgpu_irq_get/put drm/mediatek: Initialize pointer in mtk_drm_of_ddp_path_build_one() drm/mediatek: Add return value check when reading DPCD drm/mediatek: Remove unneeded semicolon drm/mediatek: mtk_dsi: Add registers to pdata to fix MT8186/MT8188 dt-bindings: display: mediatek: dp: Reference common DAI properties drm/mediatek: Fix mode valid issue for dp drm/mediatek: Fix YCbCr422 color format issue for DP Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()" ... |
||
Dave Airlie
|
fddb4fd91a |
Mediatek DRM Fixes - 20250104
1. Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing" 2. Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err 3. Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb() 4. Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported 5. Add support for 180-degree rotation in the display driver 6. Stop selecting foreign drivers 7. Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()" 8. Fix YCbCr422 color format issue for DP 9. Fix mode valid issue for dp 10. dp: Reference common DAI properties 11. dsi: Add registers to pdata to fix MT8186/MT8188 12. Remove unneeded semicolon 13. Add return value check when reading DPCD 14. Initialize pointer in mtk_drm_of_ddp_path_build_one() -----BEGIN PGP SIGNATURE----- iQJMBAABCgA2FiEEACwLKSDmq+9RDv5P4cpzo8lZTiQFAmd5KnMYHGNodW5rdWFu Zy5odUBrZXJuZWwub3JnAAoJEOHKc6PJWU4knsAP/3/WLT3sNSvlrT2t4AwMwrgt jSFV1jtiDpEaPF8+tlg0BdE1CTqkCQOCOZMBKYvsUEifAT7MDBdfIAWBMZbpRRh/ ptvHw1vBEBQpAkmo2hPJfK+J1BDncpqh65A+C1TFiBG5XKv9Zp5QXShBfZsdmqYO zfWKJ4pfUnvUgwM0RQhdRws5S45mbDqGtENiL/8MZXyouOyawqzt6hDSqSglJ+h9 NaWD+607dmAzkMYaGe35gvTsFpxV/8euNWxskbciH/vm33mBm95hsymQOKP7spuq XmKq+mbRa+mZgBGznT+MdyGwHBN0h/yrv1mHUDoi5O5MFQJ4kDuRB/c5bVG1FAoN 4AQLEv6TXhAMZWlf3LOGGVgwEO8mG+7mNF7dXMckMgNCQAZVKfaPIyoFgHn29+6g Dnom/LIOQzP65x0ta5ihCaH//6e7QCsVOWvQnqfn3JUlwtYv2NTjYu6l8+RO+kFS 2/WP4hOpJlqjESiEMoRSpbriYN3dCI64OY4mNB7pr0ea8YtPehE09uzvHSmfDbGe GT+9lWsYblTFTkZXJdthUC39v0grJh4QTKBWNldAaqGsS3hItsuDHOrGlLFJwtSx 9tXlQR27XOJVt0hfRKJMiONW2xXW2sNUnlt3kA7qPmH+zjdeo3vKxlCBYzISKepI kg4CeI6clR9ocZkTPa/0 =bc7g -----END PGP SIGNATURE----- Merge tag 'mediatek-drm-fixes-20250104' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes - 20250104 1. Revert "drm/mediatek: dsi: Correct calculation formula of PHY Timing" 2. Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err 3. Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb() 4. Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported 5. Add support for 180-degree rotation in the display driver 6. Stop selecting foreign drivers 7. Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()" 8. Fix YCbCr422 color format issue for DP 9. Fix mode valid issue for dp 10. dp: Reference common DAI properties 11. dsi: Add registers to pdata to fix MT8186/MT8188 12. Remove unneeded semicolon 13. Add return value check when reading DPCD 14. Initialize pointer in mtk_drm_of_ddp_path_build_one() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250104124227.45505-1-chunkuang.hu@kernel.org |
||
Kory Maincent
|
d1bf27c4e1 |
dt-bindings: net: pse-pd: Fix unusual character in documentation
The documentation contained an unusual character due to an issue in my personal b4 setup. Fix the problem by providing the correct PSE Pinout Alternatives table number description. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250107142659.425877-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Dave Airlie
|
198c653edf |
Merge tag 'drm-misc-fixes-2025-01-02' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.13-rc6: - Only fixes for adv7511 driver, including a use-after-free. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f58429b7-5f11-4b78-b577-de32b41299ea@linux.intel.com |
||
Fei Shao
|
8fe3ee95da |
dt-bindings: display: mediatek: dp: Reference common DAI properties
The MediaTek DP hardware supports audio and exposes a DAI, so the '#sound-dai-cells' property is needed for describing the DAI links. Reference the dai-common.yaml schema to allow '#sound-dai-cells' to be used, and filter out non-DP compatibles as MediaTek eDP in the same binding doesn't support audio. This fixes dtbs_check error: '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Fei Shao <fshao@chromium.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patchwork.kernel.org/project/dri-devel/patch/20241105090207.3892242-1-fshao@chromium.org/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> |
||
|
Linus Torvalds
|
d6ef8b40d0 |
sound fixes for 6.13-rc5
A collection of small fixes. Nothing really stands out, fortunately. - Follow-up fixes for the new compress offload API extension - A few ASoC SOF, AMD and Mediatek quirks and fixes - A regression fix in legacy SH driver cleanup - Fix DMA mapping error handling in the helper code - Fix kselftest dependency -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmdtgNMOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE/hcA//faV801EX6Dp42M19SEm4LLQrWrkqYkg9h+ra dGlgcJWQwJrxX6kyFefBiAhu99DuwDuNpUgRZgtPfdGgA2jQaKjwbP+/TMifheh8 y9ljr1TBZ90IGBcIGa6GhKVkRK/3kRj61FBRXlev3HfXn1PqMY7092wzGjL1lHoc c/qxnHdRGlPSdFdXHeXm8VNJ3QYCZlK0nf6wljKTDlCZSj/NdjFttEhSQHQ5Rbg6 NMglvBuX6GUwJm1M/SiNNJ+8NBigxs4MF1Rgy1nuuC4gndozjDXPWjSIxHsSZCm7 jpk7giqU1D9nBjxG/7wN2sE42GHKx61oEvJVVS+53zRetXuBFSNbEgGNCJPsjWwS TUKMuUfyBfNwV9WKJ8/8IS50Vqdbgf+t1VLHUuGFMq7NkFFpnW+KGnfJL4ZSHyce 9bAVwkA26mX1YhBhsHq1R4DGOVIVmeIIKH6f6uazN7YNB2y5VFSJIiMUK6ih8OwQ NWqCdn5i3qfco/Gi/IZd5kAbT6xWsLViGEJ0rTCsjHJI3zu54i8Xyl5Fp0e8lLJj /rr/QzBwIiBLMlj+WcrEc0a+P0izqur/OhYJIeVJbtfVrJLtFv67NRjnaqeyJK1M 5UevtxAC0r5NrYmQpURW8GGTkMiu/litNiIbHrcCCCWYZhMz6ST4UdqBNW73bOMK bHaNyqk= =3ZF7 -----END PGP SIGNATURE----- Merge tag 'sound-6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes. Nothing really stands out, fortunately. - Follow-up fixes for the new compress offload API extension - A few ASoC SOF, AMD and Mediatek quirks and fixes - A regression fix in legacy SH driver cleanup - Fix DMA mapping error handling in the helper code - Fix kselftest dependency" * tag 'sound-6.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: sh: Fix wrong argument order for copy_from_iter() selftests/alsa: Fix circular dependency involving global-timer ALSA: memalloc: prefer dma_mapping_error() over explicit address checking ALSA: compress_offload: improve file descriptors installation for dma-buf ALSA: compress_offload: use safe list iteration in snd_compr_task_seq() ALSA: compress_offload: avoid 64-bit get_user() ALSA: compress_offload: import DMA_BUF namespace ASoC: mediatek: disable buffer pre-allocation ASoC: rt722: add delay time to wait for the calibration procedure ASoC: SOF: Intel: hda-dai: Do not release the link DMA on STOP ASoC: dt-bindings: realtek,rt5645: Fix CPVDD voltage comment ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 21QA and 21QB ASoC: Intel: sof_sdw: Fix DMI match for Lenovo 21Q6 and 21Q7 ASoC: amd: ps: Fix for enabling DMIC on acp63 platform via _DSD entry |
||
|
Linus Torvalds
|
bcde95ce32 |
Devicetree fixes for 6.13, part 1:
- Disable #address-cells/#size-cells warning on coreboot (Chromebooks) platforms - Add missing root #address-cells/#size-cells in default empty DT - Fix uninitialized variable in of_irq_parse_one() - Fix interrupt-map cell length check in of_irq_parse_imap_parent() - Fix refcount handling in __of_get_dma_parent() - Fix error path in of_parse_phandle_with_args_map() - Fix dma-ranges handling with flags cells - Drop explicit fw_devlink handling of 'interrupt-parent' - Fix "compression" typo in fixed-partitions binding - Unify "fsl,liodn" property type definitions -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmdoKtIACgkQ+vtdtY28 YcPM9w//foQifBxhfhjGFOZT/nZhlQu2EJT4eJ02hmFSDyvSBHTTdWELcjOKaGO7 QDex/Pw8gv1x0XMywaAOcCcZlQKUd0R9KjC+bWi+lC+f1MGyj5Pd1O2/jtZLJbuB BwGm/h4rxzM0nNDhD+mQwC/pZId0+ATA9kV4iR4RexWTxWdeYV8KDc7zA1pxi/aI PpKEQ6aapXCNjwYGANzs3ylA5AUHijQHOs9L64ACPAIJTN5ZOZvB1mZ33vp4NHl6 yNdNnZ8xZl8vecTM3rYTX9/yDRU18ME4gE72Hz5PfJ7aO7Xy8ebc4JCFTP8Iefwl ivVYsFFKIvqKArE0NRDxqYYmOpBob8id7nDuAZ2wmx0LLNgM/bkrk1ysuUwoMeQd aP/sGZ3+roKLDpBBTnOmTw89YWYkaLFXVwU4TbN7UIzqSYX5onGzSagN3fEnmHQu Q6hehVa9M758hwxiVK4S4z79RKTVwq8u1BLMe/s765xDKpvJGVwH4QlV+MfKLcn9 jbG2hT/mYwAQebmNqVWI7dAb8dt7zXijebuJCGPMW4RquBNGi+59MRAd4HrkJ2i4 DABbp3A5OqlyN05ilpB89w+GsPCgDL179mTy0MxRGY4O6GIqKdcBGjzqPHPW6UQf o9zdnw5ZnP9YicApGLwGgMpdoUS7voWyyrHGw+4i9oiOKLldVww= =CFJI -----END PGP SIGNATURE----- Merge tag 'devicetree-fixes-for-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Disable #address-cells/#size-cells warning on coreboot (Chromebooks) platforms - Add missing root #address-cells/#size-cells in default empty DT - Fix uninitialized variable in of_irq_parse_one() - Fix interrupt-map cell length check in of_irq_parse_imap_parent() - Fix refcount handling in __of_get_dma_parent() - Fix error path in of_parse_phandle_with_args_map() - Fix dma-ranges handling with flags cells - Drop explicit fw_devlink handling of 'interrupt-parent' - Fix "compression" typo in fixed-partitions binding - Unify "fsl,liodn" property type definitions * tag 'devicetree-fixes-for-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Add coreboot firmware to excluded default cells list of/irq: Fix using uninitialized variable @addr_len in API of_irq_parse_one() of/irq: Fix interrupt-map cell length check in of_irq_parse_imap_parent() of: Fix refcount leakage for OF node returned by __of_get_dma_parent() of: Fix error path in of_parse_phandle_with_args_map() dt-bindings: mtd: fixed-partitions: Fix "compression" typo of: Add #address-cells/#size-cells in the device-tree root empty node dt-bindings: Unify "fsl,liodn" type definitions of: address: Preserve the flags portion on 1:1 dma-ranges mapping of/unittest: Add empty dma-ranges address translation tests of: property: fw_devlink: Do not use interrupt-parent directly |
||
Biju Das
|
ee8f9ed57a |
dt-bindings: display: adi,adv7533: Drop single lane support
As per [1] and [2], ADV7535/7533 supports only 2-, 3-, or 4-lane. Drop
unsupported 1-lane from bindings.
[1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7535.pdf
[2] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7533.pdf
Fixes:
|
||
Greg Kroah-Hartman
|
6ffc565c24 |
IIO: 1st set of fixes for 6.13 cycle.
The usual mixed back of fixes for ancient and recent bugs A number of these were from an audit by Javier Carrasco of places we may leak stack data via holes in structures passed to userspace that were not explicitly zeroed. Very helpful effort after we found a similar bug in review of new code. This affected: - dummy driver - kionix,kmx61 - murrata,zpa2326 - rockchip,saradc - rohm,bh1745 - veml,vcnl4035 - ti,ads1119 - ti,ads8688 - ti,tmp0006 Other fixes: core,inkern - Underflow fo reference count issue in error path of iio_channel_get_all() for devices we haven't yet gotten. tests - Kconfig typo fix so it's possible to tell what test is being enabled. - Check for allocation failures. adi,ad4695 - Ensure timing requirement wrt to final clock edge vs next conversion signal are met by adding an additional SPI transfer. adi,ad7124 - Ensure channels are disabled at probe to avoid wrong data if channel 0 is not the first one read. adi,ad7173 - Fix handing of multiple devices by not editing a single static structure and instead making a per instance copy. adi,ad9467 - Fix handing of multiple devices by not editing a single static structure and instead making a per instance copy. adi,ad9832 - Off by one error on input verification for phase control adi,ad9834 - Off by one error on input verification for phase control. atmel,at91 - In an error path don't use a variable that hasn't been initialized yet. invensense,icm42600 - SPI burst write does not work for some icm426000 chips, disable it. - Ensure correct handling of timestamps after resume. st,sensors - Add back accidentally dropped IIS2MDC compatible in binding doc. st,stm32-dfsdm: - label property was accidentally made a required property. Make it optional again to fix use of older DT. ti,ads1119 - Use a fixed size for the channel data rather than an integer, bringing the code inline with the advertised 16 bit channel size and avoiding userspace misinterpreting the data. ti,ads124s08 - Use _cansleep gpio calls as no reason to prevent sleeping and it was stopping a new board design working (trivial fix). ti,ads1298 - Add a check on failure of devm_kasprintf() -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmdaAfERHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0FojDng/+OFybX06zLefGBaCvitsax+JPjnznZc5t pHWaCR8Wm5cWeky7fEnYS1uS2mlgAro9HmGCy1MErcDQJZs/sYMN6oMynPwbFr1t gtJomIFEewVbR3QXMefW1sYtuYoIBxAJp/Rf8QyHjDZJGKazHi9RwRicFbMB5wQu f+ngG7JloaL2uXEjymsmlgOQZwBAQYvGe5hwyh++E0yY/zyf6sO6Cku5h7tiqiy7 TCV31Q+/43OvC/+pemt+fUmzPh0Y0tHSXDwLXT0dSzm7y2ND57lnHL14MPDZTXCJ o1BgYhVBUsLydMs2MCZsv8BtoUln7IoH2gH2pl4fWbye0U4/eL1i+rO4SXDaXXeX U48qTHEOE+P1pY3/0NSnOOAfvFnY+hLp+X0G/ZDTcWUXE7QCSwza1JNcTEoEPOm3 dlltX1FSyu18i4AN71tyJNCUv44jL/uGWp+wbPj8YoMbMGVCRB6QmjT3a3Nux99l Js8s+oVLKgzjqtJZYCxgUgwx3bC7MEnrvUMN9F6Awm1C9vbk8sLqo3o4iE+wfUZJ t7xAmLYs5+MtiMJUo3+GanvTQUSpLtBsZ3Q1YBfc6O7yf2GCL18TbZad1Y4OQibq God5ajeChBrEtUiqOvm4+2Dk5vJcBC9ficp7YhSmyy9iz+rHbkZ4kZhW+KiChYHm /UTK9S4uXeQ= =r/KU -----END PGP SIGNATURE----- Merge tag 'iio-fixes-for-6.13a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: IIO: 1st set of fixes for 6.13 cycle. The usual mixed back of fixes for ancient and recent bugs A number of these were from an audit by Javier Carrasco of places we may leak stack data via holes in structures passed to userspace that were not explicitly zeroed. Very helpful effort after we found a similar bug in review of new code. This affected: - dummy driver - kionix,kmx61 - murrata,zpa2326 - rockchip,saradc - rohm,bh1745 - veml,vcnl4035 - ti,ads1119 - ti,ads8688 - ti,tmp0006 Other fixes: core,inkern - Underflow fo reference count issue in error path of iio_channel_get_all() for devices we haven't yet gotten. tests - Kconfig typo fix so it's possible to tell what test is being enabled. - Check for allocation failures. adi,ad4695 - Ensure timing requirement wrt to final clock edge vs next conversion signal are met by adding an additional SPI transfer. adi,ad7124 - Ensure channels are disabled at probe to avoid wrong data if channel 0 is not the first one read. adi,ad7173 - Fix handing of multiple devices by not editing a single static structure and instead making a per instance copy. adi,ad9467 - Fix handing of multiple devices by not editing a single static structure and instead making a per instance copy. adi,ad9832 - Off by one error on input verification for phase control adi,ad9834 - Off by one error on input verification for phase control. atmel,at91 - In an error path don't use a variable that hasn't been initialized yet. invensense,icm42600 - SPI burst write does not work for some icm426000 chips, disable it. - Ensure correct handling of timestamps after resume. st,sensors - Add back accidentally dropped IIS2MDC compatible in binding doc. st,stm32-dfsdm: - label property was accidentally made a required property. Make it optional again to fix use of older DT. ti,ads1119 - Use a fixed size for the channel data rather than an integer, bringing the code inline with the advertised 16 bit channel size and avoiding userspace misinterpreting the data. ti,ads124s08 - Use _cansleep gpio calls as no reason to prevent sleeping and it was stopping a new board design working (trivial fix). ti,ads1298 - Add a check on failure of devm_kasprintf() * tag 'iio-fixes-for-6.13a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (27 commits) iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer iio: temperature: tmp006: fix information leak in triggered buffer iio: inkern: call iio_device_put() only on mapped devices iio: adc: ad9467: Fix the "don't allow reading vref if not available" case iio: adc: at91: call input_free_device() on allocated iio_dev iio: adc: ad7173: fix using shared static info struct iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep() iio: adc: ti-ads1119: fix information leak in triggered buffer iio: pressure: zpa2326: fix information leak in triggered buffer iio: adc: rockchip_saradc: fix information leak in triggered buffer iio: imu: kmx61: fix information leak in triggered buffer iio: light: vcnl4035: fix information leak in triggered buffer iio: light: bh1745: fix information leak in triggered buffer iio: adc: ti-ads8688: fix information leak in triggered buffer iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer iio: test: Fix GTS test config dt-bindings: iio: st-sensors: Re-add IIS2MDC magnetometer iio: adc: ti-ads1298: Add NULL check in ads1298_init iio: adc: stm32-dfsdm: handle label as an optional property iio: adc: ad4695: fix buffered read, single sample timings ... |
||
Chen-Yu Tsai
|
6f4a0fd03c |
ASoC: dt-bindings: realtek,rt5645: Fix CPVDD voltage comment
Both the ALC5645 and ALC5650 datasheets specify a recommended voltage of 1.8V for CPVDD, not 3.5V. Fix the comment. Cc: Matthias Brugger <matthias.bgg@gmail.com> Fixes: |
||
|
Linus Torvalds
|
a0e3919a2d |
USB driver fixes for 6.13-rc3
Here are some small USB driver fixes for some reported issues. Included in here are: - typec driver bugfixes - u_serial gadget driver bugfix for much reported and discussed issue - dwc2 bugfixes - midi gadget driver bugfix - ehci-hcd driver bugfix - other small bugfixes All of these have been in linux-next for over a week with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ12Wwg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymbWgCeKUCeGFlUanDHY1nHq72FSMiHpcUAoIvzBTx1 yUEhvtuYYZ/NBzfKI+8h =WeQD -----END PGP SIGNATURE----- Merge tag 'usb-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are some small USB driver fixes for some reported issues. Included in here are: - typec driver bugfixes - u_serial gadget driver bugfix for much reported and discussed issue - dwc2 bugfixes - midi gadget driver bugfix - ehci-hcd driver bugfix - other small bugfixes All of these have been in linux-next for over a week with no reported issues" * tag 'usb-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Fix connector status writing past buffer size usb: typec: ucsi: Fix completion notifications usb: dwc2: Fix HCD port connection race usb: dwc2: hcd: Fix GetPortStatus & SetPortFeature usb: dwc2: Fix HCD resume usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer usb: misc: onboard_usb_dev: skip suspend/resume sequence for USB5744 SMBus support usb: dwc3: xilinx: make sure pipe clock is deselected in usb2 only mode usb: core: hcd: only check primary hcd skip_phy_initialization usb: gadget: midi2: Fix interpretation of is_midi1 bits usb: dwc3: imx8mp: fix software node kernel dump usb: typec: anx7411: fix OF node reference leaks in anx7411_typec_switch_probe() usb: typec: anx7411: fix fwnode_handle reference leak usb: host: max3421-hcd: Correctly abort a USB request. dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml usb: ehci-hcd: fix call balance of clocks handling routines |
||
Janaki Ramaiah Thota
|
8099b1f7e3 |
regulator: dt-bindings: qcom,qca6390-pmu: document wcn6750-pmu
Add description of the PMU node for the WCN6750B module. Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241209103455.9675-2-quic_janathot@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Sean Nyekjaer
|
55d82a7ac7 |
dt-bindings: iio: st-sensors: Re-add IIS2MDC magnetometer
"iio: st-sensors: Update ST Sensor bindings" accidentially dropped
the compatible for the IIS2MDC magnetometer.
Fixes:
|
||
|
Linus Torvalds
|
fa4c221fa1 |
pmdomain core:
- Fix a couple of memory-leaks during genpd init/remove
pmdomain providers:
- imx: Adjust delay for gpcv2 to fix power up handshake
- mediatek: Fix DT bindings by adding another nested power-domain layer
-----BEGIN PGP SIGNATURE-----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=fCUR
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"Core:
- Fix a couple of memory-leaks during genpd init/remove
Providers:
- imx: Adjust delay for gpcv2 to fix power up handshake
- mediatek: Fix DT bindings by adding another nested power-domain
layer"
* tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: gpcv2: Adjust delay after power up handshake
pmdomain: core: Fix error path in pm_genpd_init() when ida alloc fails
pmdomain: core: Add missing put_device()
dt-bindings: power: mediatek: Add another nested power-domain layer
|
||
|
Linus Torvalds
|
42d52acfb1 |
linux-watchdog 6.13-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAmdO8FgACgkQ+iyteGJfRsqdmgCgqPArbZweV/LTPcZXx89MaIEd hG8AoLrh8n5L08d6r5v1sII5To4KoZI7 =IX0/ -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add support for exynosautov920 SoC - Add support for Airoha EN7851 watchdog - Add support for MT6735 TOPRGU/WDT - Delete the cpu5wdt driver - Always print when registering watchdog fails - Several other small fixes and improvements * tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits) watchdog: rti: of: honor timeout-sec property watchdog: s3c2410_wdt: add support for exynosautov920 SoC dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings watchdog: mediatek: Add support for MT6735 TOPRGU/WDT watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart() dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property dt-bindings: watchdog: Document Qualcomm QCS8300 docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs" watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler watchdog: Switch back to struct platform_driver::remove() watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04 watchdog: da9063: Remove __maybe_unused notations watchdog: da9063: Do not use a global variable watchdog: Delete the cpu5wdt driver watchdog: Add support for Airoha EN7851 watchdog dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581 watchdog: sl28cpld_wdt: don't print out if registering watchdog fails watchdog: rza_wdt: don't print out if registering watchdog fails watchdog: rti_wdt: don't print out if registering watchdog fails ... |
||
Xu Yang
|
282615d133 |
dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml
The i.MX95 usb-phy can work with or without orientation-switch. With
current setting, if usb-phy works without orientation-switch, the
dt-schema check will show below error:
phy@4c1f0040: 'oneOf' conditional failed, one must be fixed:
'port' is a required property
'ports' is a required property
from schema $id: http://devicetree.org/schemas/phy/fsl,imx8mq-usb-phy.yaml#
This will correct the behavior of referring to usb-switch.yaml.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241119105017.917833-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
Rob Herring (Arm)
|
239521712b |
dt-bindings: mtd: fixed-partitions: Fix "compression" typo
The example erroneously has "compress" property rather than the documented "compression" property. Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20241113225632.1783241-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Fei Shao
|
f00582aa4a |
dt-bindings: power: mediatek: Add another nested power-domain layer
The MT8188 SoC has a more in-depth power-domain tree, and the CHECK_DTBS=y check could fail because the current MediaTek power dt-binding is insufficient to cover its CAM_SUBA and CAM_SUBB sub-domains. Add one more nested power-domain layer to pass the check. Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Fei Shao <fshao@chromium.org> Message-ID: <20241001113052.3124869-2-fshao@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
|
Linus Torvalds
|
c4bb3a2d64 |
ARM:
* Fixes. RISC-V: * Svade and Svadu (accessed and dirty bit) extension support for host and guest. This was acked on the mailing list by the RISC-V maintainer, see https://patchew.org/linux/20240726084931.28924-1-yongxuan.wang@sifive.com/. -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmdKS0QUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroP7hggAmt5CJesFGIuDwQgJX1KuNWAS84AX Oq5SPZLH0XjE5YDm6AusSzvbtOhRM6mARU5/iqMRE6Mqpf4MXpP9tOo6xaDiL7+m bOFsDYEO73WQyrIfFUCZ7dXiTbDVtQfNH8Z1yQwHPsa1d+WDYY3tLbCe5qCdqYMF JDiB7K0cQzPDmhCwf3Zf8mW2ZRI0QsTqiuFUfVGGNgFDspWfBFBqkLCkrMNmbp9z ye375oKb2VCe6OBJCY+Nl6tdoBUkz+CtZDCxkxuh0Uk4NmsUC9JMye9iwgU9DuI7 nagFuvpUGcgbZvrx1ly47TL+wcEFLwnBJ0xBZTGIgVoZHj/wX9GM+tSgIw== =semZ -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull more kvm updates from Paolo Bonzini: - ARM fixes - RISC-V Svade and Svadu (accessed and dirty bit) extension support for host and guest * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: riscv: selftests: Add Svade and Svadu Extension to get-reg-list test RISC-V: KVM: Add Svade and Svadu Extensions Support for Guest/VM dt-bindings: riscv: Add Svade and Svadu Entries RISC-V: Add Svade and Svadu Extensions Support KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status KVM: arm64: Mark set_sysreg_masks() as inline to avoid build failure KVM: arm64: vgic-its: Add stronger type-checking to the ITS entry sizes KVM: arm64: vgic: Kill VGIC_MAX_PRIVATE definition KVM: arm64: vgic: Make vgic_get_irq() more robust KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR |
||
|
Linus Torvalds
|
0e287d31b6 |
RTC for 6.13
New drivers: - Amlogic A4 and A5 RTC - Marvell 88PM886 PMIC RTC - Renesas RTCA-3 for Renesas RZ/G3S Drivers: - ab-eoz9: fix temperature and alarm support - cmos: improve locking behaviour - isl12022: add alarm support - m48t59: improve epoch handling - mt6359: add range - rzn1: fix BCD conversions and simplify driver -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmdKJY4ACgkQY6TcMGxw OjJvKhAAmxWzgm5wXTtzNdO/GvmlXehTQ+vdUbhldIGTDKekT2Dr4ijwAI/JOKJt CDasXOQw2jEQg1NyxMmcBHtEol6866pUW9+tMFwYi2SxphOfhMbuw7bQNpOPCWUS rK3y/sbz0CrHPaGv9RcAxSpzCboXNWCaIGE/JPC/3nhnlSYwW2XZMLxCVTJ1ixAV S0Z4CtwCo3E7t6+i1ZY0Lm1AXze9xOuEWF+r9x5TonpetY8z94EcB8xniHfLbrpZ 1hpwewihyG7pJzvJr7+Q8Ze8P6m/LbohBk7TbzG035ILBSbUu6UHysQCocMgsz8j M4yOTTKPwprdc9DrhtykEK4sx+fF1V5tJV+Nl1sljpQco6PNWu+JP6BFrRR8OH0w OwmNytgLQux0+rtWjMMuyXYkSKJssTTrpZqpVRud/jf/IVyowQxbCQnTUK8WSm6v 1cqI4KnVcUFx+kp0BeLJz4a31O8VeMhj+YYqruFhaGdhwMYimXp8X9ZMxZkCVpMa OlmtswPvBkN1b/+w72aOXBmrWFYafICZZY7MAViEzVHM0yoIVwEzSfBToT7hvV7h w2LFSvHqLIChnUYYEQUlCh7xXhUks7fwbyRG/2n/0G1We7ZsEKIlPXCmhRl0e2R+ TGgkfUjczJ5z48m0oSy62yj1bmKVvtVdsJ/Ua5192eSxqBCTv78= =Q4/G -----END PGP SIGNATURE----- Merge tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "New drivers: - Amlogic A4 and A5 RTC - Marvell 88PM886 PMIC RTC - Renesas RTCA-3 for Renesas RZ/G3S Driver updates: - ab-eoz9: fix temperature and alarm support - cmos: improve locking behaviour - isl12022: add alarm support - m48t59: improve epoch handling - mt6359: add range - rzn1: fix BCD conversions and simplify driver" * tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (38 commits) rtc: ab-eoz9: don't fail temperature reads on undervoltage notification rtc: rzn1: reduce register access rtc: rzn1: drop superfluous wday calculation m68k: mvme147, mvme16x: Adopt rtc-m48t59 platform driver rtc: brcmstb-waketimer: don't include 'pm_wakeup.h' directly rtc: m48t59: Use platform_data struct for year offset value rtc: ab-eoz9: fix abeoz9_rtc_read_alarm rtc: rv3028: fix RV3028_TS_COUNT type rtc: rzn1: update Michel's email rtc: rzn1: fix BCD to rtc_time conversion errors rtc: amlogic-a4: fix compile error rtc: amlogic-a4: drop error messages MAINTAINERS: Add an entry for Amlogic RTC driver rtc: support for the Amlogic on-chip RTC dt-bindings: rtc: Add Amlogic A4 and A5 RTC rtc: add driver for Marvell 88PM886 PMIC RTC rtc: check if __rtc_read_time was successful in rtc_timer_do_work() rtc: pcf8563: Switch to regmap rtc: pcf8563: Sort headers alphabetically rtc: abx80x: Fix WDT bit position of the status register ... |
||
|
Linus Torvalds
|
d8b78066f4 |
TTY / Serial driver updates for 6.13-rc1
Here is a small set of tty and serial driver updates for 6.13-rc1. Nothing major at all this time, only some small changes: - few device tree binding updates - 8250_exar serial driver updates - imx serial driver updates - sprd_serial driver updates - other tiny serial driver updates, full details in the shortlog All of these have been in linux-next for a while with one reported issue, but that commit has now been reverted. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0s3DA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykmgQCeIDU0GHWFuzEiZNmsO5bLN8AcoFQAn1rlOaHu 9lOOf7xVSCUBU0GgynI5 =SEtJ -----END PGP SIGNATURE----- Merge tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is a small set of tty and serial driver updates for 6.13-rc1. Nothing major at all this time, only some small changes: - few device tree binding updates - 8250_exar serial driver updates - imx serial driver updates - sprd_serial driver updates - other tiny serial driver updates, full details in the shortlog All of these have been in linux-next for a while with one reported issue, but that commit has now been reverted" * tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits) Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit" serial: amba-pl011: fix build regression dt-bindings: serial: Add a new compatible string for ums9632 serial: sprd: Add support for sc9632 tty/serial/altera_uart: unwrap error log string tty/serial/altera_jtaguart: unwrap error log string serial: amba-pl011: Fix RX stall when DMA is used tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler serial: 8250_fintek: Add support for F81216E serial: sh-sci: Clean sci_ports[0] after at earlycon exit tty: atmel_serial: Fix typo retreives to retrieves tty: atmel_serial: Use devm_platform_ioremap_resource() serial: 8250: omap: Move pm_runtime_get_sync tty: serial: samsung: Add Exynos8895 compatible dt-bindings: serial: samsung: Add samsung,exynos8895-uart compatible serial: 8250_dw: Add Sophgo SG2044 quirk dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts dt-bindings: serial: snps,dw-apb-uart: merge duplicate compatible entry. altera_jtaguart: Use dev_err() to report error attaching IRQ altera_uart: Use dev_err() to report error attaching IRQ handler ... |
||
|
Linus Torvalds
|
2eff01ee28 |
Char/Misc/IIO/Whatever driver subsystem updates for 6.13-rc1
Here is the "big and hairy" char/misc/iio and other small driver
subsystem updates for 6.13-rc1. Sorry for doing this at the end of the
merge window, conference and holiday travel got in the way on my side
(hence the 5am pull request emails...)
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible. I think this is the tipping point,
expect to see way more rust drivers going forward now that these
bindings are present. Next merge window hopefully we will have pci
and platform drivers working, which will fully enable almost all
driver subsystems to start accepting (or at least getting) rust
drivers. This is the end result of a lot of work from a lot of
people, congrats to all of them for getting this far, you've proved
many of us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
Note, there is a semi-hairy rust merge conflict when pulling this. The
resolution has been in linux-next for a while and can be seen here:
https://lore.kernel.org/all/20241111173459.2646d4af@canb.auug.org.au/
All of these have been in linux-next for a while, with no other reported
issues other than that merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lGpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKHQCgvI4Muu2tpdINBVe24Zc8S3ozg0AAnRNg3F7r
ikneftUDYtuviSGU/Rs8
=CW+i
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
|
||
|
Linus Torvalds
|
e33a6d83e1 |
USB / Thunderbolt (USB4) changes for 6.13-rc1
Here is the big set of USB and Thunderbolt changes for 6.13-rc1. Overall, a pretty slow development cycle, the majority of the work going into the debugfs interface for the thunderbolt (i.e. USB4) code, to help with debugging the myrad ways that hardware vendors get their interfaces messed up. Other than that, here's the highlights: - thunderbolt changes and additions to debugfs interfaces - lots of device tree updates for new and old hardware - UVC configfs gadget updates and new apis for features - xhci driver updates and fixes - dwc3 driver updates and fixes - typec driver updates and fixes - lots of other small updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lBqA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynTXQCfSs0ldBqZoINU/22q8BUg7ybb+pcAoL5EbbEm b2igfp6YIEWAtUkactmO =gwwq -----END PGP SIGNATURE----- Merge tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.13-rc1. Overall, a pretty slow development cycle, the majority of the work going into the debugfs interface for the thunderbolt (i.e. USB4) code, to help with debugging the myrad ways that hardware vendors get their interfaces messed up. Other than that, here's the highlights: - thunderbolt changes and additions to debugfs interfaces - lots of device tree updates for new and old hardware - UVC configfs gadget updates and new apis for features - xhci driver updates and fixes - dwc3 driver updates and fixes - typec driver updates and fixes - lots of other small updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits) usb: typec: tcpm: Add support for sink-bc12-completion-time-ms DT property dt-bindings: usb: maxim,max33359: add usage of sink bc12 time property dt-bindings: connector: Add time property for Sink BC12 detection completion usb: dwc3: gadget: Remove dwc3_request->needs_extra_trb usb: dwc3: gadget: Cleanup SG handling usb: dwc3: gadget: Fix looping of queued SG entries usb: dwc3: gadget: Fix checking for number of TRBs left usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED Revert "usb: gadget: composite: fix OS descriptors w_value logic" usb: ehci-spear: fix call balance of sehci clk handling routines USB: make to_usb_device_driver() use container_of_const() USB: make to_usb_driver() use container_of_const() USB: properly lock dynamic id list when showing an id USB: make single lock for all usb dynamic id lists drivers/usb/storage: refactor min with min_t drivers/usb/serial: refactor min with min_t drivers/usb/musb: refactor min/max with min_t/max_t drivers/usb/mon: refactor min with min_t drivers/usb/misc: refactor min with min_t drivers/usb/host: refactor min/max with min_t/max_t ... |
||
|
Linus Torvalds
|
d83ec4afd2 |
regulator: Fixes for v6.13
A couple of fixes that came in during the merge window, plus documetation of a new device ID for the Qualcomm LABIBB driver. There's a core fix for the rarely used current constraints and a fix for the Qualcomm RPMH driver which had described only one of the two voltage ranges that the hardware could control, creating a potential incompatibility with the configuration left by firmware. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmdIcWQACgkQJNaLcl1U h9DfPAf/T/w7ZNWOR52sK8et3itHVVu3YSxB92fMz/CdesUgApi2Q6Py/gw1sduQ mY6vUd3aLkTI1Qi+XifeoRKOdRud0GRcgVILdg0J/KgzJ7EXEJ4pxE+uLE6Etuop TGD9CY/rsX92vk9aOSPBPXfNtYB8JfBH4EgJSmHYl3V3kNe1jA32IbGUOVahA+vW r9M1M40fuE6AsvfX47oN2mird9HyRjTRwwtrMzR8pqq3AZ8CRpPhngaxVpotmGOZ UEaJj83WXKtja9iezYTQYmhj9yfw/c7A4UdqUFjAeScRHYxl3U+kue8MpjND1DQZ kQfsgFoYLN6CTBhnognp1oyovixztQ== =Lhu/ -----END PGP SIGNATURE----- Merge tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of fixes that came in during the merge window, plus documetation of a new device ID for the Qualcomm LABIBB driver. There's a core fix for the rarely used current constraints and a fix for the Qualcomm RPMH driver which had described only one of the two voltage ranges that the hardware could control, creating a potential incompatibility with the configuration left by firmware" * tag 'regulator-fix-v6.13-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: Ignore unset max_uA constraints in current limit check dt-bindings: regulator: qcom-labibb-regulator: document the pmi8950 labibb regulator regulator: qcom-rpmh: Update ranges for FTSMPS525 |
||
|
Linus Torvalds
|
448ecd5771 |
power supply and reset changes for the 6.13 series
* power-supply core
- replace power_supply_register_no_ws() with power_supply_register() and a
new "no_wakeup_source" field in struct power_supply_config
- constify battery info tables in the core and all drivers
- switch back to remove callback for all platform drivers
- allow power_supply_put() to be called from atomic context
- mark attribute arrays read-only after init
* power-supply drivers
- new driver for TWL6030 and TWL6032
- rk817: improve battery capacity calibration
- misc. small cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=vpkz
-----END PGP SIGNATURE-----
Merge tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- replace power_supply_register_no_ws() with power_supply_register()
and a new "no_wakeup_source" field in struct power_supply_config
- constify battery info tables in the core and all drivers
- switch back to remove callback for all platform drivers
- allow power_supply_put() to be called from atomic context
- mark attribute arrays read-only after init
Power-supply drivers:
- new driver for TWL6030 and TWL6032
- rk817: improve battery capacity calibration
- misc small cleanups and fixes"
* tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits)
power: reset: ep93xx: add AUXILIARY_BUS dependency
dt-bindings: power: reset: Convert mode-.* properties to array
power: supply: sc27xx: Fix battery detect GPIO probe
dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio
reset: keystone-reset: remove unused macros
power: supply: axp20x_battery: Use scaled iio_read_channel
power: supply: axp20x_usb_power: Use scaled iio_read_channel
power: supply: generic-adc-battery: change my gmail
power: supply: pmu_battery: Set power supply type to BATTERY
power: Switch back to struct platform_driver::remove()
power: supply: hwmon: move interface to private header
power: supply: rk817: Update battery capacity calibration
power: supply: rk817: stop updating info in suspend
power: supply: rt9471: Use IC status regfield to report real charger status
power: supply: rt9471: Fix wrong WDT function regfield declaration
dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example
power: supply: core: mark attribute arrays as ro_after_init
power: supply: core: unexport power_supply_property_is_writeable()
power: supply: core: use device mutex wrappers
power: supply: bq27xxx: Fix registers of bq27426
...
|
||
|
Linus Torvalds
|
79525e24af |
Additional power management updates for 6.13-rc1
Update the OPP (Operating Performance Points) DT bindings for ti-cpu (Dhruva Gole) and remove unused declarations from the OPP header file (Zhang Zekun). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmdHYnUSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxMkcP/jJMorNzdZiu5o13yfvbxF9NO5OWNvit cMvDMO3nCIxdU5ujEPf7ibDRvshAuT3px4qdnGo1860e5TFVJYZXAhfctwJpC3Ab 4E6AyDSFFc7e/TFXkGJAZB4nM2uvYzfrO5IdtKt0t3RwKHrnwe4iLo7fI3JOBvol 9iTIlUZ+88JZlv8chBE1Wo9l0/EIMUncvtEwud2Jh8bLlLgSJtq2RADFjtw2rot0 e2S8VB/XQQ2fnF8hhlClyZ6Zs5gkDiw4j+Lv8ctcO31uYfYxcHOeKWkye2E3uJLR JorEnowCSjZyfJolmmbq6CEbyOKB/vU5mYJMja447QI7Y05u7ChLD5qse5D55dcL uw6iUVN41Mm7ng2A0GIV8y2GQYxtG/xbX4jbZujxx+RhFuhHVxW+6FgGb50h1zhr s8Hik/1r8V8lMLDTNgwA146b0meL2FozL2Z7FYHur7aqU0ywYaIBkLZRXvzKlz7Q Vu3d43xbe1iRnjhJ6k6SDs2TlzDqwWBO1ctUDcTVXsfa0i0LYs4khjLROxfrJYDO uNIXPGe6kCYJjeCovIo1mXxSomHmRufJcQTc9aqdi34NpZskwyVU7HMmMcUAqPob XK35tyG83yzRLQfl7+CSvxY1lzrCMyAcdbUnQhvplnatdnVYY/3b0q36ilqqGG8w EW1Vml8RfPyx =9/iX -----END PGP SIGNATURE----- Merge tag 'pm-6.13-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull morepower management updates from Rafael Wysocki: "These update the OPP (Operating Performance Points) DT bindings for ti-cpu (Dhruva Gole) and remove unused declarations from the OPP header file (Zhang Zekun)" * tag 'pm-6.13-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: dt-bindings: opp: operating-points-v2-ti-cpu: Describe opp-supported-hw OPP: Remove unused declarations in header file |
||
|
Linus Torvalds
|
0ce9a5ffca |
phy-for-6.13
- New Support
- ST STM32MP25 combophy support
- Sparx5 support for lan969x serdes and updates to driver to support this
- NXP PTN3222 eUSB2 to USB2 redriver
- Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2 support,
X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP UFS PHY
support and SA8775P eDP PHY support
- Rockchip rk3576 usbdp and rk3576 usb2 phy support
- Binding for Microchip ATA6561 can phy
- Updates
- Freescale driver updates from hdmi support
- Conversion of rockchip rk3228 hdmi phy binding to yaml
- Broadcom usb2-phy deprecated support dropped and USB init array update
for BCM4908
- TI USXGMII mode support in J7200
- Switch back to platform_driver::remove() subsystem update
-----BEGIN PGP SIGNATURE-----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=5o8/
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New hardware support:
- ST STM32MP25 combophy support
- Sparx5 support for lan969x serdes and updates to driver to support
this
- NXP PTN3222 eUSB2 to USB2 redriver
- Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2
support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP
UFS PHY support and SA8775P eDP PHY support
- Rockchip rk3576 usbdp and rk3576 usb2 phy support
- Binding for Microchip ATA6561 can phy
Updates:
- Freescale driver updates from hdmi support
- Conversion of rockchip rk3228 hdmi phy binding to yaml
- Broadcom usb2-phy deprecated support dropped and USB init array
update for BCM4908
- TI USXGMII mode support in J7200
- Switch back to platform_driver::remove() subsystem update"
* tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits)
phy: qcom: qmp: Fix lecacy-legacy typo
phy: lan969x-serdes: add support for lan969x serdes driver
dt-bindings: phy: sparx5: document lan969x
phy: sparx5-serdes: add support for branching on chip type
phy: sparx5-serdes: add indirection layer to register macros
phy: sparx5-serdes: add function for getting the CMU index
phy: sparx5-serdes: add ops to match data
phy: sparx5-serdes: add constant for the number of CMU's
phy: sparx5-serdes: add constants to match data
phy: sparx5-serdes: add support for private match data
phy: bcm-ns-usb2: drop support for old binding variant
dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant
dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible
dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions
phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll()
phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l()
phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out()
phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL
...
|
||
|
Linus Torvalds
|
7536c1a50e |
dmaengine updates for v6.13
New support:
- Qualcomm SAR2130P GPI dma support
- Sifive PIC64GX pdma support
- Rcar r7s72100 support and associated updates
Updates:
- STM32 DMA3 updates for packing/unpacking mode and prevention of
additional xfers
- Simplification of devm_acpi_dma_controller_register() and associate
cleanup including headers
- loongson prefix renames
- Switch back to platform_driver::remove() subsystem update
-----BEGIN PGP SIGNATURE-----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=LVro
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New hardware support:
- Qualcomm SAR2130P GPI dma support
- Sifive PIC64GX pdma support
- Rcar r7s72100 support and associated updates
Updates:
- STM32 DMA3 updates for packing/unpacking mode and prevention of
additional xfers
- Simplification of devm_acpi_dma_controller_register() and associate
cleanup including headers
- loongson prefix renames
- Switch back to platform_driver::remove() subsystem update"
* tag 'dmaengine-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: loongson2-apb: Rename the prefix ls2x to loongson2
dt-bindings: dma: sifive pdma: Add PIC64GX to compatibles
dmaengine: fix typo in the comment
dmaengine: stm32-dma3: clamp AXI burst using match data
dmaengine: stm32-dma3: prevent LL refactoring thanks to DT configuration
dt-bindings: dma: stm32-dma3: prevent additional transfers
dmaengine: stm32-dma3: refactor HW linked-list to optimize memory accesses
dmaengine: stm32-dma3: prevent pack/unpack thanks to DT configuration
dt-bindings: dma: stm32-dma3: prevent packing/unpacking mode
dmaengine: idxd: Move DSA/IAA device IDs to IDXD driver
dt-bindings: dma: qcom,gpi: Add SAR2130P compatible
dmaengine: Switch back to struct platform_driver::remove()
dmaengine: ep93xx: Fix unsigned compared against 0
dmaengine: acpi: Clean up headers
dmaengine: acpi: Simplify devm_acpi_dma_controller_register()
dmaengine: acpi: Drop unused devm_acpi_dma_controller_free()
dmaengine: sh: rz-dmac: add r7s72100 support
dt-bindings: dma: rz-dmac: Document RZ/A1H SoC
|
||
|
Linus Torvalds
|
91dbbe6c9f |
RISC-V Paches for the 6.13 Merge Window, Part 1
* Support for pointer masking in userspace, * Support for probing vector misaligned access performance. * Support for qspinlock on systems with Zacas and Zabha. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmdHNu4THHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiZW7D/oCjSIdBHZ6OJN8vATRn2FoHedMgKzE 8OF0EXX85+PNmznxzyUirPerfQPcog5422vCKLUR5h8QD0x3wdMH8gUaV0Wa11k8 ldXlV903k7gJLtJMnww2Eiha7kds5XpNWsWBTU0sBAxt2mMUE2VlloBY5YM/fitJ 3TUihA7vyic5J0H3H4VrkuEoFnN4Xl9WclbwCYFg0uKmiogqXCe5LKey5/JjLpDR 2DdFe/7PRjQMuUNVrNO4Vm+/YD1nwRdg5ukvIl42KINHWKyn1hl23cKsFobrilw5 GyMbTzP4hBhy3kpX+zjWPpvTyoHSww7iJK6AvkvgQk/gua8M6abLJheachY/Ciz1 lJy4okB8H2LtZwMYlJiIXBQzKE1qCwNA1/m24y8SUYQXvjxwGZxaPXAyWvvqBxOP /q/jQYfCiQi/h7BncMv9F8cxkU3J8cglzmxTKlM5Rf5YKdOzMyf4t0sm2pPsFX2l V4xjZQNMDJ1IHGnRbeMTOqHN6iKymyj8BKph5kATO5W9gq4tWXRSEIPfuGJMq2jq T64RweOdHlBPhiXu4hMmRXgT2rNBfTuaqEsVgXAZWkPmqum9uDPjBBiJ89bQO6pk dJl7jVJ27HKSd4zLwnxSGCsVahirF4CCtULRam08500Gfz6dEarD7shZznd86cEg QiBXqK5W6IWyJw== =ND+J -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-v updates from Palmer Dabbelt: - Support for pointer masking in userspace - Support for probing vector misaligned access performance - Support for qspinlock on systems with Zacas and Zabha * tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits) RISC-V: Remove unnecessary include from compat.h riscv: Fix default misaligned access trap riscv: Add qspinlock support dt-bindings: riscv: Add Ziccrse ISA extension description riscv: Add ISA extension parsing for Ziccrse asm-generic: ticket-lock: Add separate ticket-lock.h asm-generic: ticket-lock: Reuse arch_spinlock_t of qspinlock riscv: Implement xchg8/16() using Zabha riscv: Implement arch_cmpxchg128() using Zacas riscv: Improve zacas fully-ordered cmpxchg() riscv: Implement cmpxchg8/16() using Zabha dt-bindings: riscv: Add Zabha ISA extension description riscv: Implement cmpxchg32/64() using Zacas riscv: Do not fail to build on byte/halfword operations with Zawrs riscv: Move cpufeature.h macros into their own header KVM: riscv: selftests: Add Smnpm and Ssnpm to get-reg-list test RISC-V: KVM: Allow Smnpm and Ssnpm extensions for guests riscv: hwprobe: Export the Supm ISA extension riscv: selftests: Add a pointer masking test riscv: Allow ptrace control of the tagged address ABI ... |
||
Rafael J. Wysocki
|
07d66acad2 |
Merge branch 'pm-opp'
Merge OPP (Operating Performance Points) changes for 6.13-rc1: - Describe opp-supported-hw property for ti-cpu (Dhruva Gole). - Remove unused declarations from the OPP header file (Zhang Zekun). * pm-opp: dt-bindings: opp: operating-points-v2-ti-cpu: Describe opp-supported-hw OPP: Remove unused declarations in header file |
||
Paolo Bonzini
|
4d911c7abe |
KVM/riscv changes for 6.13 part #2
- Svade and Svadu extension support for Host and Guest/VM -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmc/KesACgkQrUjsVaLH LAcuuQ/9Gv8qezVw5TiV3BiusRns50PVIVZA12lrLLXrjiUzuo0zbIRTozeZbTzb 0HMuS8isfgNkRmj35ZXQ1nzeckf3GN3j0f/TYeAVDUCj5sARimcRzSL+k9KC62aW NxvmHsq+y4jlCr7V4viy9pkHrj2oNO4m6HhiAtgXfATXWYRtKOTkEKVYIPg3c77D U7FeUEA1ege6xKK5U+v2gpIZHOXv13RaXQqmZ3j+JfDyzIhakYSKE/mRslX3z4ch 9SKSUt2PqustyT5qdmM1jt9+q6k1QQw2fWWnxJb6AGsmDfwkEEvPKuok74TUDVPa V4mnesTIf8wPjzw4n5XSqf5i+67WuNjBBtxMWhWGmcfpLbC9y0gE+lTaRZrXU7fL 66VXVDK7YhTsWCJ9sJfRXnGAOtHcIp20lQwemdRYCSMRbD8I6OWwfBbXfo3pUo85 8mCZtstySXAyr2pnfX44kuav70D46qWyiTm0o4WSVeCExtny0qslJLmKoYgjsB+T 7eJCrpxcmsTXBMYST6AXiAg5GUVj4DoCzMDT2DcsGoa2DM1RLc8qlwSrsD4jdSdF Jc8HSOc54mSUvaE31LWwd1YJiQ20Nh8kfv5nmO7m9LB6ADiZOL1yL7tTsSxrMWSg l0lgJbjTRYTPVghXR/kkAD7jXEthWAFJ5knv5CT2bb6Qx7uWPpk= =juLq -----END PGP SIGNATURE----- Merge tag 'kvm-riscv-6.13-2' of https://github.com/kvm-riscv/linux into HEAD KVM/riscv changes for 6.13 part #2 - Svade and Svadu extension support for Host and Guest/VM |
||
|
Paolo Bonzini
|
c1668520c9 |
RISC-V Paches for the 6.13 Merge Window, Part 1
* Support for pointer masking in userspace, * Support for probing vector misaligned access performance. * Support for qspinlock on systems with Zacas and Zabha. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmdHNu4THHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiZW7D/oCjSIdBHZ6OJN8vATRn2FoHedMgKzE 8OF0EXX85+PNmznxzyUirPerfQPcog5422vCKLUR5h8QD0x3wdMH8gUaV0Wa11k8 ldXlV903k7gJLtJMnww2Eiha7kds5XpNWsWBTU0sBAxt2mMUE2VlloBY5YM/fitJ 3TUihA7vyic5J0H3H4VrkuEoFnN4Xl9WclbwCYFg0uKmiogqXCe5LKey5/JjLpDR 2DdFe/7PRjQMuUNVrNO4Vm+/YD1nwRdg5ukvIl42KINHWKyn1hl23cKsFobrilw5 GyMbTzP4hBhy3kpX+zjWPpvTyoHSww7iJK6AvkvgQk/gua8M6abLJheachY/Ciz1 lJy4okB8H2LtZwMYlJiIXBQzKE1qCwNA1/m24y8SUYQXvjxwGZxaPXAyWvvqBxOP /q/jQYfCiQi/h7BncMv9F8cxkU3J8cglzmxTKlM5Rf5YKdOzMyf4t0sm2pPsFX2l V4xjZQNMDJ1IHGnRbeMTOqHN6iKymyj8BKph5kATO5W9gq4tWXRSEIPfuGJMq2jq T64RweOdHlBPhiXu4hMmRXgT2rNBfTuaqEsVgXAZWkPmqum9uDPjBBiJ89bQO6pk dJl7jVJ27HKSd4zLwnxSGCsVahirF4CCtULRam08500Gfz6dEarD7shZznd86cEg QiBXqK5W6IWyJw== =ND+J -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into HEAD RISC-V Paches for the 6.13 Merge Window, Part 1 * Support for pointer masking in userspace, * Support for probing vector misaligned access performance. * Support for qspinlock on systems with Zacas and Zabha. |
||
|
Rob Herring (Arm)
|
61a6ba233f |
dt-bindings: Unify "fsl,liodn" type definitions
The type definition of "fsl,liodn" is defined as uint32 in crypto/fsl,sec-v4.0.yaml and uint32-array in soc/fsl/fsl,bman.yaml, soc/fsl/fsl,qman-portal.yaml, and soc/fsl/fsl,qman.yaml. Unify the type to be uint32-array and constraint the single entry cases. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20241113225614.1782862-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Linus Torvalds
|
08906abc8c |
remoteproc updates for v6.13
Make Qualcomm TrustZone Peripherial Authentication Service-remoteproc identifier/name human friendly. Add audio DSP support for the Qualcomm SAR2130P. Ensure IMEM access in the Qualcomm modem remoteproc driver is performed prior to the firmware enabling the XPU and locking us out. Improve error handling, error logging, compile testing support, and a few other stylistic things across a variety of the drivers. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmdF8Y8VHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FT1YQAKINUB7ngao7kOzVdYISXflu5i3G evr4XyD4ClgwWNrmhGxFs7+rda3DEtdhb9O+ilOSTdDjhoK4E2vlJgsGOGhrQP8r X4xm+Md07MDhV4OMwo0IvzJ6xDa3U2coc0uhozNGdv85TmN1R3ep7On2rSBPtiAK 0+Y3KZZ9WOtuV9FeDc/Ccn9b7MjLlolC6Z6QkWSJPUnZvJjrl/xeLlWZqQObsRTR gYReZX9qA4fT2UTmxo/n0N4huFoyvxQZD74CFkuU1Rl+TzVJuKxeiKL0Mpx92xR7 nlRTND+03UumpHr5RGt2ikD99BHJAixLLYMJZWexOhG7wXk6r9mBSNvRdrbCjljF ElnrhJSyzbTkXDxP9XjpyaiKXLV7/CndJya6x1DvfqMjcxUNUSMzIgWVU+Rul9xW 5YKIWLb9jWLyIZwOcycvQ7blpxzIciRdIiyPbH1qXgQOYIEV1BU/K+thGDyhsTAn R6a/CPcR6LXfxk4alQ7iRrcYBnkW7y5072WgNmyQakgnZgz2W4P2Q5FWhWipLe+n fL9txtl5EGV3R56thVHPqqL1xA/YZjo+myNAg83BnhHu+OaqBgEIGMQ18BmJbSG7 DSnGbHW4Wde1zVZwUL/3awamSIRgGRfIE070+lFA9leFPxnu0fNxWcEvITDPdFDb NbThYyVcDPPFXEqR =1JNI -----END PGP SIGNATURE----- Merge tag 'rproc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: "Make Qualcomm TrustZone Peripherial Authentication Service-remoteproc identifier/name human friendly. Add audio DSP support for the Qualcomm SAR2130P. Ensure IMEM access in the Qualcomm modem remoteproc driver is performed prior to the firmware enabling the XPU and locking us out. Improve error handling, error logging, compile testing support, and a few other stylistic things across a variety of the drivers" * tag 'rproc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (30 commits) remoteproc: qcom: wcss: Remove double assignment in q6v5_wcss_probe() remoteproc: qcom_q6v5_mss: Re-order writes to the IMEM region remoteproc: qcom_wcnss_iris: Simplify with dev_err_probe() remoteproc: qcom_q6v5_wcss: Simplify with dev_err_probe() remoteproc: qcom_q6v5_pas: Simplify with dev_err_probe() remoteproc: qcom_q6v5_mss: Drop redundant error printks in probe remoteproc: qcom_q6v5_mss: Simplify with dev_err_probe() remoteproc: qcom_q6v5_adsp: Simplify with dev_err_probe() remoteproc: qcom_q6v5_pas: disable auto boot for wpss remoteproc: qcom: pas: Make remoteproc name human friendly remoteproc: qcom: pas: enable SAR2130P audio DSP support remoteproc: qcom: pas: add minidump_id to SM8350 resources dt-bindings: remoteproc: qcom,sm8350-pas: add SAR2130P aDSP compatible dt-bindings: remoteproc: qcom,sm8550-pas: Add SM8750 ADSP remoteproc: qcom: wcss: Remove subdevs on the error path of q6v5_wcss_probe() remoteproc: qcom: adsp: Remove subdevs on the error path of adsp_probe() remoteproc: qcom: pas: Remove subdevs on the error path of adsp_probe() remoteproc: Switch back to struct platform_driver::remove() remoteproc: k3-dsp: Force cast from iomem address space remoteproc: k3-r5: Force cast from iomem address space ... |
||
|
Linus Torvalds
|
1746db26f8 |
pci-v6.13-changes
-----BEGIN PGP SIGNATURE-----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=2Otz
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
|
||
|
Linus Torvalds
|
0637a68b9c |
SCSI misc on 20241125
Updates to the usual drivers (ufs, lpfc, hisi_sas, st). Amazingly enough, no core changes with the biggest set of driver changes being ufs (which conflicted with it's own fixes a bit, hence the merges) and the rest being minor fixes and updates. Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ0SFmyYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdA6AQC+yzhe jx0+EBw1RkjRoT6vapBsjN8Sc1rOr/8+TuJ8KwEA0eVuXSiFEx/ieeKLD2VuE6y4 NPRB36MZdOxfQaDZAY4= =Fj/G -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, hisi_sas, st). Amazingly enough, no core changes with the biggest set of driver changes being ufs (which conflicted with it's own fixes a bit, hence the merges) and the rest being minor fixes and updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits) scsi: st: New session only when Unit Attention for new tape scsi: st: Add MTIOCGET and MTLOAD to ioctls allowed after device reset scsi: st: Don't modify unknown block number in MTIOCGET scsi: ufs: core: Restore SM8650 support scsi: sun3: Mark driver struct with __refdata to prevent section mismatch scsi: sg: Enable runtime power management scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb() scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb() scsi: fusion: Remove unused variable 'rc' scsi: bfa: Fix use-after-free in bfad_im_module_exit() scsi: esas2r: Remove unused esas2r_build_cli_req() scsi: target: Fix incorrect function name in pscsi_create_type_disk() scsi: ufs: Replace deprecated PCI functions scsi: Switch back to struct platform_driver::remove() scsi: pm8001: Increase request sg length to support 4MiB requests scsi: pm8001: Initialize devices in pm8001_alloc_dev() scsi: pm8001: Use module param to set pcs event log severity scsi: ufs: ufs-mediatek: Configure individual LU queue flags scsi: MAINTAINERS: Update UFS Exynos entry scsi: lpfc: Copyright updates for 14.4.0.6 patches ... |
||
|
Linus Torvalds
|
2c22dc1ee3 |
common: switch back from remove_new() to remove() callback
imx: fix format specifier
zynqmp: setup IPI for each child node
thead: Add th1520 driver and bindings
qcom: add SM8750 and SAR2130p compatibles
fix expected clocks for callbacks
use IRQF_NO_SUSPEND for cpucp
mtk-cmdq: switch to __pm_runtime_put_autosuspend()
fix alloc size of clocks
mpfs: fix reg properties
ti-msgmgr: don't use of_match_ptr helper
enable COMPILE_TEST build
pcc: consider the PCC_ACK_FLAG
arm_mhuv2: fix non-fatal improper reuse of variable
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6EwehDt/SOnwFyTyf9lkf8eYP5UFAmdDggMACgkQf9lkf8eY
P5W6HRAAgopdwICYcmLYC1UgpROVjVdu2MgOmnnu1Q0BSsl/uG1zRiwQgCkAg3Md
ugHt4Way4L/LIgqTdfUIxJrS61Osqweo5C2hl8hm3RcBDZNs4C7j6UXdWgrNSkhr
OgseoJMt3o3+DQBmN2qKvbPsyciV6NkA8b4ZP64c+C0V+ci22xWEuQSllHguX7x7
ggi1NK419ZME5FS+JREjwlq07DiCFEZ1Azzhb5xAtUcZ4c3yzOvVDJSTxI5EdUKF
6K1iPHjcFlxkeJA3O1QHMs5OAocuIC3/xvWVMs+GkoZMlp5PQgnc4I81DRdQIZzk
gONizxrgljU8RGRiSGQXSY14EK4BeRHAZwOqhe5McsPRMbR0oy50eT1e+3iYen1s
zEprrw9a2a/WMKNBLOxD1hbx8vHl1KwrYk81YIJ5Vna/xZ0w3Ig4D6OXQ/zgpm8B
HkRRZKxYEGqHZWj1dxWUdcC9O6F0QHIhpYhfhXNOXaOk0lvOGTWH+wYwGgY6nOmV
ureWVHcCOcghF6BjfIT7yH9HuA2igRrlekZPxYILgbL1QZtB3NbySk1ZZA0543aZ
pakDKzo+jCRKK9I0w1WNXQj6Aa8KqHYycAf+7rPeFLf+j8cnNQ51HgC5QFSjAl+y
Ch0txVvd01wjFIstlIzcBTUK7TeI93cuwXC6/22EUgoZu0vzz9w=
=6PMb
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Common:
- switch back from remove_new() to remove() callback
imx:
- fix format specifier
zynqmp:
- setup IPI for each child node
thead:
- Add th1520 driver and bindings
qcom:
- add SM8750 and SAR2130p compatibles
- fix expected clocks for callbacks
- use IRQF_NO_SUSPEND for cpucp
mtk-cmdq:
- switch to __pm_runtime_put_autosuspend()
- fix alloc size of clocks
mpfs:
- fix reg properties
ti-msgmgr:
- don't use of_match_ptr helper
- enable COMPILE_TEST build
pcc:
- consider the PCC_ACK_FLAG
arm_mhuv2:
- fix non-fatal improper reuse of variable"
* tag 'mailbox-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: pcc: Check before sending MCTP PCC response ACK
mailbox: Switch back to struct platform_driver::remove()
mailbox: imx: Modify the incorrect format specifier
mailbox: arm_mhuv2: clean up loop in get_irq_chan_comb()
mailbox: zynqmp: setup IPI for each valid child node
dt-bindings: mailbox: Add thead,th1520-mailbox bindings
mailbox: Introduce support for T-head TH1520 Mailbox driver
mailbox: mtk-cmdq: fix wrong use of sizeof in cmdq_get_clocks()
dt-bindings: mailbox: qcom-ipcc: Add SM8750
dt-bindings: mailbox: qcom,apcs-kpss-global: correct expected clocks for fallbacks
dt-bindings: mailbox: qcom-ipcc: Add SAR2130P compatible
mailbox: ti-msgmgr: Allow building under COMPILE_TEST
mailbox: ti-msgmgr: Remove use of of_match_ptr() helper
mailbox: qcom-cpucp: Mark the irq with IRQF_NO_SUSPEND flag
mailbox: mtk-cmdq-mailbox: Switch to __pm_runtime_put_autosuspend()
mailbox: mpfs: support new, syscon based, devicetree configuration
dt-bindings: mailbox: mpfs: fix reg properties
|
||
|
Linus Torvalds
|
2d32fba02e |
This is the bulk of the pin control changes for v6.13:
No core changes this time.
New drivers:
- Xlinix Versal pin control driver.
- Ocelot LAN969x pin control driver.
- T-Head TH1520 RISC-V SoC pin control driver.
- Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC
pin control drivers.
- Qualcomm SM8750 LPASS (low power audio subsystem)
pin control driver.
- Qualcomm PM8937 mixsig IC pin control support, GPIO and
MPP (multi-purpose-pin).
- Samsung Exynos8895 and Exynos9810 SoC pin control driver.
- SpacemiT K1 SoC pin control driver.
- Airhoa EN7581 IC pin control driver.
Improvements:
- The Renesas subdriver now supports schmitt-trigger and
open drain pin configurations if the hardware supports it.
- Support GPIOF and GPIOG banks in the Aspeed G6 SoC.
- Support the DSW community in the Intel Elkhartlake SoC.
-----BEGIN PGP SIGNATURE-----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=F7bj
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time.
New drivers:
- Xlinix Versal pin control driver
- Ocelot LAN969x pin control driver
- T-Head TH1520 RISC-V SoC pin control driver
- Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC pin
control drivers
- Qualcomm SM8750 LPASS (low power audio subsystem) pin control
driver
- Qualcomm PM8937 mixsig IC pin control support, GPIO and MPP
(multi-purpose-pin)
- Samsung Exynos8895 and Exynos9810 SoC pin control driver
- SpacemiT K1 SoC pin control driver
- Airhoa EN7581 IC pin control driver
Improvements:
- The Renesas subdriver now supports schmitt-trigger and open drain
pin configurations if the hardware supports it
- Support GPIOF and GPIOG banks in the Aspeed G6 SoC
- Support the DSW community in the Intel Elkhartlake SoC"
* tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: airoha: Use unsigned long for bit search
pinctrl: k210: Undef K210_PC_DEFAULT
pinctrl: qcom: spmi: fix debugfs drive strength
pinctrl: qcom: Add sm8750 pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8750 pinctrl
pinctrl: cy8c95x0: remove unneeded goto labels
pinctrl: cy8c95x0: embed iterator to the for-loop
pinctrl: cy8c95x0: Use temporary variable for struct device
pinctrl: cy8c95x0: use flexible sleeping in reset function
pinctrl: cy8c95x0: switch to using devm_regulator_get_enable()
pinctrl: cy8c95x0: Use 2-argument strscpy()
dt-bindings: pinctrl: sx150xq: allow gpio line naming
pinctrl: single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: correct typo of description for cv1800
pinctrl: qcom: spmi-mpp: Add PM8937 compatible
dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible
pinctrl: qcom-pmic-gpio: add support for PM8937
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937
pinctrl: Use of_property_present() for non-boolean properties
...
|
||
|
Linus Torvalds
|
70dbb12e95 |
i2c-for-6.13-part2
Andi was super busy the last weeks, so this pull requests contains one
series (nomadik) and a number of smaller additions which were ready to
go but nearly overlooked. Despite the late collection, they have been
properly reviewed and have been in -next for 6 days now in Andi's tree.
New feature support:
- Added support for frequencies up to 3.4 MHz on Nomadik I2C.
- DesignWare now accounts for bus capacitance and clock
optimisation (declared as new parameters in the binding) to
improve the calculation of signal rise and fall times
(t_high and t_low).
New Hardware support:
- DWAPB I2C controller on FUJITSU-MONAKA (new ACPI HID).
- Allwinner A523 (new compatible ID).
- Mobileye EyeQ6H (new compatible ID).
-----BEGIN PGP SIGNATURE-----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=TpAe
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"Andi was super busy the last weeks, so this pull requests contains one
series (nomadik) and a number of smaller additions which were ready to
go but nearly overlooked.
New feature support:
- Added support for frequencies up to 3.4 MHz on Nomadik I2C
- DesignWare now accounts for bus capacitance and clock optimisation
(declared as new parameters in the binding) to improve the
calculation of signal rise and fall times (t_high and t_low)
New Hardware support:
- DWAPB I2C controller on FUJITSU-MONAKA (new ACPI HID)
- Allwinner A523 (new compatible ID)
- Mobileye EyeQ6H (new compatible ID)"
* tag 'i2c-for-6.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: transfer i2c-aspeed maintainership from Brendan to Ryan
i2c: designware: determine HS tHIGH and tLOW based on HW parameters
dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
i2c: nomadik: support >=1MHz speed modes
i2c: nomadik: fix BRCR computation
i2c: nomadik: support Mobileye EyeQ6H I2C controller
i2c: nomadik: switch from of_device_is_compatible() to of_match_device()
dt-bindings: i2c: nomadik: support 400kHz < clock-frequency <= 3.4MHz
dt-bindings: i2c: nomadik: add mobileye,eyeq6h-i2c bindings
dt-bindings: i2c: mv64xxx: Add Allwinner A523 compatible string
i2c: designware: Add ACPI HID for DWAPB I2C controller on FUJITSU-MONAKA
i2c: qup: use generic device property accessors
|
||
Bjorn Helgaas
|
f54ff407e6 |
Merge branch 'pci/controller/qcom'
- Enable MSI interrupts if 'global' IRQ is supported, since a previous commit unintentionally masked them (Manivannan Sadhasivam) - Move endpoint controller cleanups that depend on refclk from the host to the notifier that tells us the host has deasserted PERST# (Manivannan Sadhasivam) - Add DT binding and driver support for IPQ9574, with Synopsys IP v5.80a and Qcom IP 1.27.0 (devi priya) - Move the OPP "operating-points-v2" table from the qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it can be used by other Qcom platforms (Qiang Yu) - Add 'global' SPI interrupt for events like link-up, link-down to qcom,pcie-x1e80100 DT binding so we can start enumeration when the link comes up (Qiang Yu) - Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned to support this (Qiang Yu) - Add ops_1_21_0 for SC8280X family SoC, which doesn't use the 'iommu-map' DT property and doesn't need BDF-to-SID translation (Qiang Yu) * pci/controller/qcom: PCI: qcom: Disable ASPM L0s for X1E80100 PCI: qcom: Remove BDF2SID mapping config for SC8280X family SoC dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt dt-bindings: PCI: qcom: Move OPP table to qcom,pcie-common.yaml PCI: qcom: Add support for IPQ9574 dt-bindings: PCI: qcom: Document the IPQ9574 PCIe controller PCI: qcom-ep: Move controller cleanups to qcom_pcie_perst_deassert() PCI: qcom: Enable MSI interrupts together with Link up if 'Global IRQ' is supported |
||
|
Bjorn Helgaas
|
7b5d234e69 |
Merge branch 'pci/controller/microchip'
- Add DT and driver support for using either of the two PolarFire Root Ports (Conor Dooley) * pci/controller/microchip: PCI: microchip: Add support for using either Root Port 1 or 2 dt-bindings: PCI: microchip,pcie-host: Add reg for Root Port 2 |
||
|
Linus Torvalds
|
3e51108c72 |
Input updates for v6.13-rc0
- support for NT36672A touchscreen added to novatek-nvt-ts driver - a change to ads7846 driver to prevent XPT2046 from locking up - a change switching platform input dirves back to using remove() method (from remove_new()) - updates to a number of input drivers to use the new cleanup facilities (__free(...), guard(), and scoped-guard()) which ensure that the resources and locks are released properly and automatically - other assorted driver cleanups and fixes. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ0PQIAAKCRBAj56VGEWX nDFFAQCSj3Va9Y6ZgNFvjmPAoA3RmsrvydXMG6PuyHEEfvTtpgD9GPldve3MRqRr VcrLJXMgyX2+RgpKm1W9ZQgK9Nudegs= =Ry7d -----END PGP SIGNATURE----- Merge tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - support for NT36672A touchscreen added to novatek-nvt-ts driver - a change to ads7846 driver to prevent XPT2046 from locking up - a change switching platform input dirves back to using remove() method (from remove_new()) - updates to a number of input drivers to use the new cleanup facilities (__free(...), guard(), and scoped-guard()) which ensure that the resources and locks are released properly and automatically - other assorted driver cleanups and fixes. * tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits) Input: mpr121 - use devm_regulator_get_enable_read_voltage() Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly Input: spear-keyboard - don't include 'pm_wakeup.h' directly Input: cypress-sf - constify struct i2c_device_id Input: ads7846 - increase xfer array size in 'struct ser_req' Input: fix the input_event struct documentation Input: i8042 - fix typo dublicate to duplicate Input: ads7846 - add dummy command register clearing cycle Input: cs40l50 - fix wrong usage of INIT_WORK() Input: introduce notion of passive observers for input handlers Input: maple_keyb - use guard notation when acquiring mutex Input: locomokbd - use guard notation when acquiring spinlock Input: hilkbd - use guard notation when acquiring spinlock Input: synaptics-rmi4 - switch to using cleanup functions in F34 Input: synaptics - fix a typo dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type Input: omap-keypad - use guard notation when acquiring mutex Input: imagis - fix warning regarding 'imagis_3038_data' being unused Input: userio - remove unneeded semicolon Input: sparcspkr - use cleanup facility for device_node ... |
||
Michal Wilczynski
|
b2cf36e4a2 |
dt-bindings: mailbox: Add thead,th1520-mailbox bindings
Add bindings for the mailbox controller. This work is based on the vendor kernel. [1] Link: https://github.com/revyos/thead-kernel.git [1] Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> |
||
Krzysztof Kozlowski
|
f8809b1f48 |
dt-bindings: mailbox: qcom-ipcc: Add SM8750
Document compatible for Qualcomm SM8750 SoC IPCC, compatible with existing generic fallback. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> |
||
|
Krzysztof Kozlowski
|
cba781d79d |
dt-bindings: mailbox: qcom,apcs-kpss-global: correct expected clocks for fallbacks
Commit |
||
Dmitry Baryshkov
|
71987bc922 |
dt-bindings: mailbox: qcom-ipcc: Add SAR2130P compatible
Document compatible for the IPCC mailbox controller on SAR2130P platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> |
||
Conor Dooley
|
8edd00b06f |
dt-bindings: mailbox: mpfs: fix reg properties
When the binding for this was originally written, and later modified, mistakes were made - and the precise nature of the later modification should have been a giveaway, but alas I was naive at the time. A more correct modelling of the hardware is to use two syscons and have a single reg entry for the mailbox, containing the mailbox region. The two syscons contain the general control/status registers for the mailbox and the interrupt related registers respectively. The reason for two syscons is that the same mailbox is present on the non-SoC version of the FPGA, which has no interrupt controller, and the shared part of the rtl was unchanged between devices. This is now coming to a head, because the control/status registers share a register region with the "tvs" (temperature & voltage sensors) registers and, as it turns out, people do want to monitor temperatures and voltages... Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> |
||
Michael Wu
|
bbc89a6e83 |
dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
Since there are no registers controlling the hardware parameters IC_CAP_LOADING and IC_CLK_FREQ_OPTIMIZATION, their values can only be declared in the device tree. snps,bus-capacitance-pf indicates the bus capacitance in picofarads (pF). It affects the high and low pulse width of SCL line in high speed mode. The legal values for this property are 100 and 400 only, and default value is 100. This property corresponds to IC_CAP_LOADING. snps,clk-freq-optimized indicates whether the hardware reduce its internal clock frequency by reducing the internal latency required to generate the high period and low period of SCL line. This property corresponds to IC_CLK_FREQ_OPTIMIZATION. The driver can calculate the high period count and low period count of SCL line for high speed mode based on these two properties. Signed-off-by: Michael Wu <michael.wu@kneron.us> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> |
||
Théo Lebrun
|
54202106c0 |
dt-bindings: i2c: nomadik: support 400kHz < clock-frequency <= 3.4MHz
Hardware is not limited to 400kHz, its documentation does mention how to configure it for high-speed (a specific Speed-Mode enum value and a different bus rate clock divider register to be used). Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> |