Commit graph

28,208 commits

Author SHA1 Message Date
Michael Bommarito
4e036c10e7 usb: gadget: f_fs: copy only received bytes on short ep0 read
ffs_ep0_read() allocates its control-OUT data buffer with
kmalloc() (not kzalloc) at the Length value from the Setup
packet, then copies that full len to userspace regardless of
how many bytes were actually received:

    data = kmalloc(len, GFP_KERNEL);
    ...
    ret = __ffs_ep0_queue_wait(ffs, data, len);
    if ((ret > 0) && (copy_to_user(buf, data, len)))
            ret = -EFAULT;

__ffs_ep0_queue_wait() returns req->actual, which on a short
control OUT transfer is strictly less than len.  The
copy_to_user() call still copies len bytes, so on a short OUT
the last (len - ret) bytes of the kmalloc() buffer --
uninitialised slab residue -- are delivered to the FunctionFS
daemon.

Short ep0 OUT completions are specified USB control-transfer
behavior and are produced by in-tree UDCs:

  * dwc2 continues on req->actual < req->length for ep0 DATA OUT
    (short-not-ok is the only ep0-OUT stall path).
  * aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket.
  * renesas_usbf logs "ep0 short packet" and completes the
    request.
  * dwc3 stalls on short IN but not on short OUT.

A short ep0 OUT is therefore not evidence of a broken UDC; it is
a normal condition f_fs has to cope with.  The sibling gadgetfs
implementation in drivers/usb/gadget/legacy/inode.c already does
this correctly via min(len, dev->req->actual) before
copy_to_user().  This patch brings f_fs.c to the same safe
pattern rather than trimming at a defensive layer.

The bug is reached from the FunctionFS device node, which in
real deployments is owned by the privileged gadget daemon
(adbd, UMS, composite gadget services, etc.); it is not
reachable from unprivileged userspace.  Linux host stacks
normally reject short-wLength control OUTs before they reach
the gadget, so reproducing this required a build that
bypasses that host-side check.  With the bypass in place, a
1-byte payload on a 64-byte Setup produces 63 bytes of
non-canary slab residue in the daemon's read buffer.

Fix by copying only ret (actually received) bytes to
userspace.

Fixes: ddf8abd259 ("USB: f_fs: the FunctionFS driver")
Cc: stable <stable@kernel.org>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260419160359.1577270-1-michael.bommarito@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 11:20:30 +02:00
Seungjin Bae
7d9633528d usb: gadget: dummy_hcd: Reject hub port requests for non-existent ports
The `dummy_hub_control()` function handles USB hub class requests
to the virtual root hub. The `GetPortStatus` case returns -EPIPE for
requests with `wIndex != 1`, since the virtual root hub has only a
single port. However, the `ClearPortFeature` and `SetPortFeature`
cases lack the same check.

Fix this by extending the `wIndex != 1` rejection to both cases,
matching the existing behavior of `GetPortStatus`.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable <stable@kernel.org>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260518234314.1889396-1-eeodqql09@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 11:13:31 +02:00
Michael Bommarito
d96209626a usbip: vudc: Fix use after free bug in vudc_remove due to race condition
This patch follows up Zheng Wang's 2023 report of a use-after-free in
vudc_remove(). The original thread stalled on Shuah Khan's request for
runtime testing of the unplug/unbind path. This patch supplies that
testing and keeps Zheng's original fix shape.

In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer().
usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer().
vudc_remove() can then free the containing struct vudc while the timer is
still pending or executing.

KASAN confirms the race on an unpatched x86_64 QEMU guest with
CONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loop
that repeatedly writes a socket fd to usbip_sockfd, closes the socket
pair, and unbinds/rebinds usbip-vudc.0:

  BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0
  Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239
  Allocated by task 239:
    vudc_probe+0x4d/0xaa0
  Freed by task 239:
    kfree+0x18f/0x520
    device_release_driver_internal+0x388/0x540
    unbind_store+0xd9/0x100

This lands in the timer core rather than v_timer() itself because the
embedded timer_list is being walked after its containing struct vudc has
already been freed. The underlying lifetime bug is the same one Zheng
reported.

With v_stop_timer() called from vudc_remove() and the timer deleted
synchronously, the same harness completed 5000 bind/unbind iterations
with no KASAN report.

Fixes: b6a0ca1118 ("usbip: vudc: Add UDC specific ops")
Cc: stable <stable@kernel.org>
Reported-by: Zheng Wang <zyytlz.wz@163.com>
Closes: https://lore.kernel.org/linux-usb/20230317100954.2626573-1-zyytlz.wz@163.com/
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20260417163552.807548-1-michael.bommarito@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 11:13:06 +02:00
Sam Burkels
b53ebb811e usb: storage: Add quirks for PNY Elite Portable SSD
The PNY Elite Portable SSD (USB ID 154b:f009) is a sibling of the
already-quirked PNY Pro Elite SSDs (154b:f00b and 154b:f00d). Like its
siblings, it uses a Phison-based USB-SATA bridge that exhibits
firmware bugs when bound to the uas driver.

Without quirks, the device fails to complete READ CAPACITY commands
when accessed over UAS on a SuperSpeed (USB 3) port. The device
enumerates and reports as a SCSI direct-access device, but reports
zero logical blocks and never finishes spin-up:

    usb 2-3: new SuperSpeed USB device number 8 using xhci_hcd
    usb 2-3: New USB device found, idVendor=154b, idProduct=f009
    usb 2-3: Product: PNY ELITE PSSD
    usb 2-3: Manufacturer: PNY
    scsi host0: uas
    scsi 0:0:0:0: Direct-Access     PNY      PNY ELITE PSSD   0
    sd 0:0:0:0: [sda] Spinning up disk...
    [...10+ seconds of polling, no progress...]
    sd 0:0:0:0: [sda] Read Capacity(16) failed: hostbyte=DID_ERROR
    sd 0:0:0:0: [sda] Read Capacity(10) failed: hostbyte=DID_ERROR
    sd 0:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)

Tested each individual quirk to find the minimum that fixes this:
  - US_FL_NO_ATA_1X alone: device hangs on spin-up
  - US_FL_NO_REPORT_OPCODES alone: works on USB 2.0, hangs on USB 3.0
  - US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES: works on both

With both quirks the device enumerates correctly while still using
the uas driver, and delivers full UAS throughput (~281 MB/s
sequential read on a USB 3.0 Gen 1 port).

The existing PNY Pro Elite entries (f00b, f00d) only set NO_ATA_1X,
but this device additionally chokes on REPORT OPCODES under
SuperSpeed.

Signed-off-by: Sam Burkels <sam@1a38.nl>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260501132346.86572-1-sam@1a38.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 11:12:47 +02:00
Stephen J. Fuhry
9ddb9c0dec USB: quirks: add NO_LPM for Lenovo ThinkPad USB-C Dock Gen2 hub controllers
The Lenovo ThinkPad USB-C Dock Gen2 (17ef:a391, 17ef:a392) hub
controllers exhibit link instability when USB Link Power Management
is enabled, similar to the dock's Ethernet adapter (17ef:a387) which
already carries USB_QUIRK_NO_LPM.

When the dock reconnects after a transient disconnect, the hub
controllers enter LPM states between re-enumeration retries, causing
repeated disconnect/reconnect cycles lasting up to two minutes.
Disabling LPM for these devices restores stable enumeration.

Signed-off-by: Stephen J. Fuhry <fuhrysteve@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260513171419.44849-1-fuhrysteve@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 11:12:34 +02:00
Heitor Alves de Siqueira
121d2f682b usb: usbtmc: reject interrupt endpoints with small wMaxPacketSize
The USB488 subclass specification requires interrupt wMaxPacketSize to
be 0x02, unless the device sends vendor-specific notifications.
Endpoints that advertise less than 2 bytes for wMaxPacketSize are
unlikely to work with the current driver, as URBs will not have enough
space for interrupt headers. Considering that any notification URBs will
be ignored by the driver, reject these endpoints early during probe.

Fixes: 041370cce8 ("USB: usbtmc: refactor endpoint retrieval")
Cc: stable <stable@kernel.org>
Suggested-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Link: https://patch.msgid.link/20260505-usbtmc-iin-size-v3-2-a36113f62db7@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 10:36:13 +02:00
Heitor Alves de Siqueira
52f2ad3f7e usb: usbtmc: check URB actual_length for interrupt-IN notifications
USBTMC devices can use an optional interrupt endpoint for notification
messages. These typically contain two-byte headers indicating the
payload format, but the driver does not check if these headers are
present before accessing the data buffers. In cases where the URB
actual_length is not enough to fit these headers, the driver will either
cause an out-of-bounds read, or consume stale leftover data from a
previous notification.

Fix by checking if actual_data contains enough bytes for the headers,
otherwise resubmit URB to the interrupt endpoint.

Fixes: dbf3e7f654 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.")
Reported-by: syzbot+abbfd103085885cf16a2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=abbfd103085885cf16a2
Cc: stable <stable@kernel.org>
Suggested-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Link: https://patch.msgid.link/20260505-usbtmc-iin-size-v3-1-a36113f62db7@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 10:36:06 +02:00
Wei-Cheng Chen
5a4c828b8b xhci: tegra: Fix ghost USB device on dual-role port unplug
When a USB device is unplugged from the dual-role port, the device-mode
path in tegra_xhci_id_work() explicitly clears both SS and HS port power
via direct hub_control ClearPortFeature(POWER) calls. This preempts the
xHCI controller's normal disconnect processing -- PORT_CSC is never
generated, the USB core never sees the disconnect, and the device remains
in its internal tree as a ghost visible in lsusb.

Add an otg_set_port_power flag to control whether the dual-role switch
path performs explicit port power management. SoCs that need it
(Tegra124 / Tegra210 / Tegra186) set the flag; later SoCs (Tegra194 and
beyond) rely on the PHY mode change to handle disconnect naturally and
skip all port power calls.

Within the port power path, otg_reset_sspi additionally gates the SSPI
reset sequence on host-mode entry for SoCs that require it.

Flags set per SoC:
  Tegra124, Tegra186  -> otg_set_port_power
  Tegra210            -> otg_set_port_power, otg_reset_sspi
  Tegra194 and later  -> (none)

Fixes: f836e78430 ("usb: xhci-tegra: Add OTG support")
Cc: stable <stable@kernel.org>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Link: https://patch.msgid.link/20260505112630.217704-1-weichengc@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 10:35:50 +02:00
Kai Aizen
68aa70648b usb: gadget: uvc: hold opts->lock across XU walks in uvc_function_bind
uvc_function_bind() walks &opts->extension_units twice without holding
opts->lock:

  - directly, for the iExtension string-descriptor fixup loop;
  - indirectly, four times via uvc_copy_descriptors() (once per speed),
    where the helper iterates uvc->desc.extension_units (which aliases
    &opts->extension_units) to size and emit XU descriptors.

The configfs side (uvcg_extension_make / uvcg_extension_drop, in
drivers/usb/gadget/function/uvc_configfs.c) takes opts->lock around its
list_add_tail / list_del operations.  A privileged userspace process
that holds the configfs subtree open and writes the gadget UDC name
to bind the function while concurrently rmdir()'ing an extensions
subdir can race uvcg_extension_drop() against the bind-time list walks
and dereference a freed struct uvcg_extension.

Hold opts->lock from the start of the XU string-descriptor fixup
through the last uvc_copy_descriptors() call, releasing on the
descriptor-error path via a new error_unlock label that drops the
lock before falling through to the existing error label.  This
matches the locking discipline of the configfs callbacks and removes
the only remaining unsynchronised reader of the XU list during bind.

Reachability: only privileged processes that can mount configfs and
write to gadget UDC files can trigger the race, so this is a
correctness fix rather than a security boundary.

Fixes: 0525210c98 ("usb: gadget: uvc: Allow definition of XUs in configfs")
Cc: stable <stable@kernel.org>
Signed-off-by: Kai Aizen <kai.aizen.dev@gmail.com>
Link: https://patch.msgid.link/20260430175643.67120-1-kai.aizen.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 10:35:36 +02:00
Guangshuo Li
c8547c7498 usb: gadget: net2280: Fix double free in probe error path
usb_initialize_gadget() installs gadget_release() as the release
callback for the embedded gadget device.  The struct net2280 instance is
therefore released through gadget_release() when the gadget device's last
reference is dropped.

The probe error path calls net2280_remove(), which tears down the
partially initialized device and drops the gadget reference with
usb_put_gadget().  Calling kfree(dev) afterwards can free the same object
again.

Drop the explicit kfree() and let the gadget device release callback
handle the final free.  This issue was found by a static analysis tool
I am developing.

Fixes: f770fbec41 ("USB: UDC: net2280: Fix memory leaks")
Cc: stable <stable@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260427153651.337846-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 10:35:22 +02:00
Guangshuo Li
4f88d65def usb: gadget: f_hid: fix device reference leak in hidg_alloc()
hidg_alloc() initializes hidg->dev with device_initialize() before
calling dev_set_name(). If dev_set_name() fails, the function currently
jumps to err_unlock and returns without calling put_device().

This leaves the device reference unbalanced and prevents hidg_release()
from being called. Calling put_device() here is also safe, since
hidg_release() only frees resources owned by hidg.

The issue was identified by a static analysis tool I developed and
confirmed by manual review.

Route the dev_set_name() failure path through err_put_device so the
device reference is dropped properly.

Fixes: 89ff3dfac6 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev")
Cc: stable <stable@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Johan Hovold johan@kernel.org
Link: https://patch.msgid.link/20260413142119.2977716-1-lgs201920130244@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 10:34:06 +02:00
Wentao Liang
e194ce048f usb: musb: omap2430: Fix use-after-free in omap2430_probe()
In omap2430_probe(), of_node_put(np) is called prematurely before the
last access to np, leading to a use-after-free if the node's reference
count drops to zero. Move the of_node_put() calls after the last use of
np in both the success and error paths.

Fixes: ffbe2feac5 ("usb: musb: omap2430: Fix probe regression for missing resources")
Cc: stable <stable@kernel.org>
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260409101104.480623-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-22 10:33:43 +02:00
Myrrh Periwinkle
d98d413ca6 usb: typec: ucsi: Don't update power_supply on power role change if not connected
We only need to update the power_supply on power role change if the port
is connected, because otherwise the online status should be the same for
both cases.

Cc: stable <stable@kernel.org>
Fixes: 7616f006db ("usb: typec: ucsi: Update power_supply on power role change")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://patch.msgid.link/20260519-ucsi-fix-2-v1-2-6f1239535187@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-21 16:57:15 +02:00
Myrrh Periwinkle
b80e7d34c7 usb: typec: ucsi: Check if power role change actually happened before handling
The CrOS EC may send a connector status change event with the power
direction changed flag set even if the power direction hasn't actually
changed after initiating a SET_PDR command internally [1]. In practice
this happens on every system suspend due to other changes performed by
the EC [2][3][4], causing suspend to fail.

Fix this by checking if the power role change actually happened before
handling it.

[1]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=1689;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794
[2]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=3923;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794
[3]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=5094;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794
[4]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=2229;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794

Cc: stable <stable@kernel.org>
Fixes: 7616f006db ("usb: typec: ucsi: Update power_supply on power role change")
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260519-ucsi-fix-2-v1-1-6f1239535187@qtmlabs.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-21 16:57:10 +02:00
Sebastian Reichel
c06e6cd488 usb: typec: tcpm: improve handling of DISCOVER_MODES failures
UGREEN USB-C Multifunction Adapter Model CM512 (AKA "Revodok 107")
exposes two SVIDs: 0xff01 (DP Alt Mode) and 0x1d5c. The DISCOVER_MODES
step succeeds for 0xff01 and gets a NAK for 0x1d5c. Currently this
results in DP Alt Mode not being registered either, since the modes
are only registered once all of them have been discovered. The NAK
results in the processing being stopped and thus no Alt modes being
registered.

Improve the situation by handling the NAK gracefully and continue
processing the other modes.

Before this change, the TCPM log ends like this:

(more log entries before this)
[    5.028287] AMS DISCOVER_SVIDS finished
[    5.028291] cc:=4
[    5.040040] SVID 1: 0xff01
[    5.040054] SVID 2: 0x1d5c
[    5.040082] AMS DISCOVER_MODES start
[    5.040096] PD TX, header: 0x1b6f
[    5.050946] PD TX complete, status: 0
[    5.059609] PD RX, header: 0x264f [1]
[    5.059626] Rx VDM cmd 0xff018043 type 1 cmd 3 len 2
[    5.059640] AMS DISCOVER_MODES finished
[    5.059644] cc:=4
[    5.069994]  Alternate mode 0: SVID 0xff01, VDO 1: 0x000c0045
[    5.070029] AMS DISCOVER_MODES start
[    5.070043] PD TX, header: 0x1d6f
[    5.081139] PD TX complete, status: 0
[    5.087498] PD RX, header: 0x184f [1]
[    5.087515] Rx VDM cmd 0x1d5c8083 type 2 cmd 3 len 1
[    5.087529] AMS DISCOVER_MODES finished
[    5.087534] cc:=4
(no further log entries after this point)

After this patch the TCPM log looks exactly the same, but then
continues like this:

[    5.100222] Skip SVID 0x1d5c (failed to discover mode)
[    5.101699] AMS DFP_TO_UFP_ENTER_MODE start
(log goes on as the system initializes DP AltMode)

Cc: stable <stable@kernel.org>
Fixes: 41d9d75344 ("usb: typec: tcpm: add discover svids and discover modes support for sop'")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20260429-tcpm-discover-modes-nak-fix-v4-1-75945d0ed30f@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-21 16:56:43 +02:00
Yongchao Wu
c8778ff817 usb: cdns3: gadget: fix request skipping after clearing halt
According to the cdns3 datasheet, the EPRST (Endpoint Reset) command
causes the DMA engine to reposition its internal pointer to the next
Transfer Descriptor (TD) if it was already processing one.

This issue is consistently observed during the ADB identification
process on macOS hosts, where the host issues a Clear_Halt. Although
commit 4bf2dd6513 ("usb: cdns3: gadget: toggle cycle bit before reset
endpoint") attempted to avoid DMA advance by toggling the cycle bit,
trace logs show that on certain hosts like macOS, the DMA pointer
(EP_TRADDR) still shifts after EPRST:

  cdns3_ctrl_req: Clear Endpoint Feature(Halt ep1out)
  cdns3_doorbell_epx: ep1out, ep_trbaddr f9c04030  <-- Should be f9c04000
  cdns3_gadget_giveback: ep1out: req: ... length: 16384/16384

As shown above, the DMA pointer jumped to the next TD, causing
the controller to skip the initial TRBs of the request. This leads to
data misalignment and ADB protocol hangs on macOS.

Fix this by manually restoring the EP_TRADDR register to the starting
physical address of the current request after the EPRST operation is
complete.

Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Cc: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Yongchao Wu <yongchao.wu@autochips.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260513160012.2547894-1-yongchao.wu@autochips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-21 16:56:29 +02:00
Peter Chen
ae6f3b8232 usb: cdns3: plat: fix unbalanced pm_runtime_forbid() call permanently leaks the runtime PM usage counter across bind/unbind cycles
Call pm_runtime_allow(dev) conditionally at cdns3_plat_remove.

Fixes: f738957277 ("usb: cdns3: Split core.c into cdns3-plat and core.c file")
Cc: stable <stable@kernel.org>
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-devicetree/agKaEePSFknhDBg2@nchen-desktop/T/#m21e1d9c1574eb127ce03c0c2a1a49002ce435b52
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Link: https://patch.msgid.link/20260513085310.2217547-3-peter.chen@cixtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-21 16:56:10 +02:00
Peter Chen
e6970cda63 usb: cdns3: plat: fix leaked usb2_phy initialization on usb3_phy acquisition failure
Move usb2_phy initialization after usb3_phy acquisition.

Fixes: f738957277 ("usb: cdns3: Split core.c into cdns3-plat and core.c file")
Cc: stable <stable@kernel.org>
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-devicetree/agKaEePSFknhDBg2@nchen-desktop/T/#m21e1d9c1574eb127ce03c0c2a1a49002ce435b52
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Link: https://patch.msgid.link/20260513085310.2217547-2-peter.chen@cixtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-21 16:56:06 +02:00
Felix Gu
ca927fc45e usb: typec: fusb302: Fix resource leak when devm_drm_dp_hpd_bridge_add() fails
If devm_drm_dp_hpd_bridge_add() fails during fusb302_probe(), the original
code returned directly without cleaning up the resources.

Move bridge registration before the IRQ is requested and route bridge
registration failures through the existing TCPM unregister and fwnode
cleanup path.

Fixes: 5d79c52540 ("usb: typec: fusb302: add DRM DP HPD bridge support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260428-fusb-v2-1-aa3b5942cabb@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-21 16:40:54 +02:00
Radhey Shyam Pandey
c1a0ecbf32 usb: dwc3: xilinx: fix error handling in zynqmp init error paths
Fix error handling and resource cleanup i.e remove invalid
phy_exit() after failed phy_init(), route failures through
proper cleanup paths and return 0 explicitly on success.

Fixes: 84770f028f ("usb: dwc3: Add driver for Xilinx platforms")
Cc: stable@vger.kernel.org
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20260519115529.2980421-1-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-21 16:40:50 +02:00
Greg Kroah-Hartman
288a81a850 usb: typec: ucsi: validate connector number in ucsi_connector_change()
The connector number in a UCSI CCI notification is a 7-bit field
supplied by the PPM.  ucsi_connector_change() uses it to index the
ucsi->connector[] array without checking it against the number of
connectors the PPM reported at init time, so a buggy or malicious PPM
(EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 /
glink transports) can drive schedule_work() on memory past the end of
the array.

Reject connector numbers that are zero or exceed cap.num_connectors
before dereferencing the array.

Assisted-by: gkh_clanker_t1000
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Jameson Thies <jthies@google.com>
Cc: Nathan Rebello <nathan.c.rebello@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Pooja Katiyar <pooja.katiyar@intel.com>
Cc: Hsin-Te Yuan <yuanhsinte@chromium.org>
Cc: Abel Vesa <abelvesa@kernel.org>
Cc: stable <stable@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/2026051351-truck-steadfast-df48@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-19 12:26:04 +02:00
Greg Kroah-Hartman
167dd8d122 usb: typec: ucsi: displayport: NAK DP_CMD_CONFIGURE without a payload VDO
ucsi_displayport_vdm() handles a DP_CMD_CONFIGURE by copying the first
payload VDO from data[], but unlike the equivalent handler in
altmodes/displayport.c it does not check that count covers a VDO beyond
the header.  A header-only Configure VDM (count == 1) would read one u32
past the caller's array.

In the normal UCSI path the caller controls count, so this is hardening
for non-standard delivery paths.  NAK and bail when no configuration VDO
is present, matching the generic DP altmode driver's existing guard.

Assisted-by: gkh_clanker_t1000
Cc: Pooja Katiyar <pooja.katiyar@intel.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/2026051351-vividly-flattered-eb3d@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-19 12:25:59 +02:00
Greg Kroah-Hartman
3389c149c6 usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes()
svdm_consume_modes() checks pmdata->altmodes against the array size once
before the loop over the count, but forgot to check the bound at every
point in the loop.

In the well-behaved SVDM discovery flow this is harmless because each of
at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX
modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX].  But the
CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming
ACK with any request the port actually sent.  Once port->partner is set,
an unsolicited Discover Modes ACK is consumed unconditionally.  A broken
or malicious port partner can therefore drive altmodes to
ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra
Discover Modes ACK with seven VDOs.  Because the pre-loop check passes,
the loop could then writes up to five entries past altmode_desc[].  For
mode_data_prime the next field in struct tcpm_port is the
partner_altmode[] pointer array, which then receives partner-chosen
SVID/VDO bytes.

Move the bound check inside the loop so the array can never be indexed
past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner
supplies or how the function was reached.

Assisted-by: gkh_clanker_t1000
Cc: Badhri Jagan Sridharan <badhri@google.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026051351-reshuffle-skillful-90af@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-19 12:25:54 +02:00
Greg Kroah-Hartman
8fbc349e83 usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers
Properly validate the count passed from a device when calling
svdm_consume_identity() or svdm_consume_identity_sop_prime() as the
device-controlled value could index off of the static arrays, which
could leak data.

Assisted-by: gkh_clanker_t1000
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/2026051350-plated-salute-0efe@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-19 12:25:49 +02:00
Greg Kroah-Hartman
aa2f716327 usb: typec: tcpm/tcpci_maxim: validate header NDO against RX_BYTE_CNT
A broken/malicious port can transmit a CRC-valid frame whose header
advertises up to seven data objects but whose body carries fewer than
that.  Check for this, and rightfully reject the message, instead of
reading from uninitialized stack memory.

Assisted-by: gkh_clanker_t1000
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: "André Draszik" <andre.draszik@linaro.org>
Cc: Badhri Jagan Sridharan <badhri@google.com>
Cc: Amit Sunil Dhamne <amitsd@google.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026051350-sitter-canopener-9045@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-19 12:25:40 +02:00
Greg Kroah-Hartman
8a18f896e6 usb: typec: altmodes/displayport: validate count before reading Status Update VDO
A broken/malicious device can send the incorrect count for a status
update VDO, which will cause the kernel to read uninitialized stack data
and send it off elsewhere.

Fix this up by correctly verifying the count for the update object.

Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/2026051350-reacquire-sculpture-4244@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-19 12:25:35 +02:00
Greg Kroah-Hartman
4af7ad0e6d usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer()
wcove_read_rx_buffer() copies the PD RX FIFO into the caller's
struct pd_message with

	for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++)
		regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i);

which has two problems:

USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message
is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed).
The byte count latched in RXINFO is the number of bytes the port partner
put on the wire, so a malicious partner that transmits a 31-byte frame
can drive the loop one byte past the destination if the WCOVE BMC
receiver does not enforce the PD object-count limit in hardware. The
existing FIXME flagged this as unverified.

Independently, regmap_read() takes an unsigned int * and stores a full
unsigned int at the destination. Passing the byte pointer msg + i means
each iteration writes four bytes; the high three are zero (val_bits is
8) and are normally overwritten by the next iteration, but the final
iteration's high bytes are not. With RXBYTES == 30 the i == 29 iteration
already writes three zero bytes past msg, which sits on the IRQ thread's
stack in wcove_typec_irq().

Clamp the loop to sizeof(struct pd_message) and read each register into
a local before storing only its low byte, so the copy can never exceed
the destination regardless of what RXINFO reports.

Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/2026051347-clustered-deflected-9543@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-19 12:25:27 +02:00
Michal Pecio
af8c5aa7a9 usb: core: Clean up SuperSpeed/eUSB2 descriptor validation logging
Core usually prints endpoint addresses with 0x%X format.
Change this code to use it too, instead of just %d.
Particularly for IN, 0x83 seems more readable than 131.

While at that, fix checkpatch warnings about multi-line
quoted strings, as well as missing or doubled whitespace
in those strings.

Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://patch.msgid.link/20260518073258.6532bdd5.michal.pecio@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-18 15:16:58 +02:00
Michal Pecio
727d045d06 usb: core: Fix up Interrupt IN endpoints with bogus wBytesPerInterval
Tao Xue found that some common devices violate USB 3.x section 9.6.7
by reporting wBytesPerInterval lower than the size of packets they
actually send. I confirmed that AX88179 may set it to 0 and RTL8153
CDC configuration sets it to 8 but sends both 8 and 16 byte packets:

S Ii:11:007:3 -115:128 16 <
C Ii:11:007:3 0:128 8 = a1000000 01000000
S Ii:11:007:3 -115:128 16 <
C Ii:11:007:3 0:128 16 = a12a0000 01000800 00000000 00000000

Most xHCI host controllers neglect interrupt bandwidth reservations
and let such devices exceed theirs, some fail the URB with EOVERFLOW.

Assume that wBytesPerInterval lower than wMaxPacketSize is bogus and
increase it to the worst case maximum on interrupt IN endpoints. This
solves xHCI problems and appears to have no other effect. Interrupt
transfers are not limited to one interval and drivers submit URBs of
class defined size without looking at wBytesPerInterval. Any multi-
interval transfer is considered terminated by a packet shorter than
wMaxPacketSize regardless of wBytesPerInterval - see USB3 8.10.3.

Stay in spec on OUT endpoints and isochronous. No buggy devices are
known and we don't want to risk sending more data than the device
is prepared to handle or confusing isoc drivers regarding altsetting
capacities guaranteed by the device itself. And don't complain when
wMaxPacketSize <= wBytesPerInterval < wMaxPacketSize * (bMaxBurst+1)
because enabling this seems to be the exact goal of the spec.

Reported-and-tested-by: Tao Xue <xuetao09@huawei.com>
Closes: https://lore.kernel.org/linux-usb/20260402021400.28853-1-xuetao09@huawei.com/
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://patch.msgid.link/20260518073207.5b7d26e7.michal.pecio@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-18 15:16:58 +02:00
Michal Pecio
d1e280334b usb: core: Fix SuperSpeed root hub wMaxPacketSize
There is no good reason to have wBytesPerInterval < wMaxPacketSize -
either one is too low or the other too high, and we may want to warn
about such descriptors. Start with cleaning up our own root hubs.

USB 3.2 section 10.15.1 sets wMaxPacketSize and wBytesPerInterval of
SuperSpeed hub status endpoints at 2 bytes, so reduce wMaxPacketSize
from its former value of 4, which was derived from USB 2.0 spec and
the kernel's USB_MAXCHILDREN limit. They don't apply because USB 3.2
10.15.2.1 specifies SuperSpeed hubs to have up to 15 ports.

Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://patch.msgid.link/20260518073121.7bc1da0f.michal.pecio@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-18 15:16:58 +02:00
Greg Kroah-Hartman
d7486952bf usb: typec: ucsi: ccg: reject firmware images without a ':' record header
do_flash() locates the first .cyacd record with

	p = strnchr(fw->data, fw->size, ':');
	while (p < eof) {
		s = strnchr(p + 1, eof - p - 1, ':');
		...
	}

If the firmware image contains no ':' byte,  strnchr() returns NULL.
NULL compares less than the valid kernel pointer eof, so the loop body
runs and strnchr() is called with p + 1 == (void *)1 and a length of
roughly (unsigned long)eof, causing a wonderful crash.

The not_signed_fw fallthrough earlier in do_flash() and the chip-state
branches in ccg_fw_update_needed() allow an unsigned blob to reach this
loop, so a root user who can place a crafted file under /lib/firmware
and write the do_flash sysfs attribute can trigger the oops.

Bail out with -EINVAL when the initial strnchr() returns NULL.

Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026051405-posture-shrill-7884@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-18 15:14:57 +02:00
Jeremy Erazo
6c5dbc104d usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling
The WebUSB GET_URL handler in composite_setup() narrows
landing_page_length to fit the host-supplied wLength using

	landing_page_length = w_length
		- WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;

If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the
unsigned subtraction wraps, and the subsequent

	memcpy(url_descriptor->URL,
	       cdev->landing_page + landing_page_offset,
	       landing_page_length - landing_page_offset);

ends up copying close to UINT_MAX bytes from cdev->landing_page into
cdev->req->buf.  KASAN reports a slab-out-of-bounds in composite_setup
on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the
memcpy as a 4294967293-byte field-spanning write into
url_descriptor->URL (size 252).

A USB host can reach this from a single SETUP packet against any
gadget that has webusb/use=1 and a landingPage configured.

Handle the small-wLength case before the math: when the host requested
fewer bytes than the URL descriptor header, only the header is
meaningful and no URL bytes need to be copied.  Setting
landing_page_length to landing_page_offset makes the existing memcpy a
no-op and leaves the descriptor returned to the host unchanged for all
larger wLength values.

Fixes: 93c473948c ("usb: gadget: add WebUSB landing page support")
Cc: stable <stable@kernel.org>
Signed-off-by: Jeremy Erazo <mendozayt13@gmail.com>
Link: https://patch.msgid.link/20260512160530.352318-1-mendozayt13@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-18 15:14:39 +02:00
Dan Carpenter
b02900c85a usb: typec: tipd: Fix error code in tps6598x_probe()
Set the error code on these two error paths.  The existing code returns
success.

Fixes: 77ed2f4538 ("usb: typec: tipd: Use read_power_status function in probe")
Fixes: 04041fd7d6 ("usb: typec: tipd: Read data status in probe and cache its value")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/agL9o7wUK1dOVBTy@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-05-18 15:14:19 +02:00
Greg Kroah-Hartman
4fd44d47e8 USB serial device ids for 7.1-rc3
Here are some new modem device ids.
 
 This one has been in linux-next with no reported issues.
 -----BEGIN PGP SIGNATURE-----
 
 iJEEABYKADkWIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaf2E2xsUgAAAAAAEAA5t
 YW51MiwyLjUrMS4xMiwyLDIACgkQC8XNwux9ZQhIfwD/fGmlfl2wSwq0DzyBlxn4
 /4Lj3XCC4ped7qO6i0bKzYUA/2Mv3PONpNxTJ0hmqreXLYCJsP1b9mLIgCTx0aJe
 nMsC
 =6gMv
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-7.1-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB serial device ids for 7.1-rc3

Here are some new modem device ids.

This one has been in linux-next with no reported issues.

* tag 'usb-serial-7.1-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add Telit Cinterion LE910Cx compositions
2026-05-08 17:18:43 +02:00
Fabio Porcedda
100201d349 USB: serial: option: add Telit Cinterion LE910Cx compositions
Add the following Telit Cinterion LE910Cx compositions:

0x1251: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (SAP)
T:  Bus=01 Lev=01 Prnt=21 Port=06 Cnt=01 Dev#=108 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=1251 Rev=03.18
S:  Manufacturer=Android
S:  Product=LE910C1-EU
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

0x1253: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (SAP)
T:  Bus=01 Lev=01 Prnt=21 Port=06 Cnt=01 Dev#=121 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=1253 Rev=03.18
S:  Manufacturer=Android
S:  Product=LE910C1-EU
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

0x1254: tty (AT) + tty (AT)
T:  Bus=01 Lev=01 Prnt=21 Port=06 Cnt=01 Dev#=122 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=1254 Rev=03.18
S:  Manufacturer=Android
S:  Product=LE910C1-EU
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

0x1255: tty (AT/NMEA) + tty (AT) + tty (AT) + tty (SAP)
T:  Bus=01 Lev=01 Prnt=21 Port=06 Cnt=01 Dev#=123 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=1255 Rev=03.18
S:  Manufacturer=Android
S:  Product=LE910C1-EU
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
2026-04-30 10:53:56 +02:00
Greg Kroah-Hartman
b38e53cbfb usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl
Just like in a previous problem in this driver, usblp_ctrl_msg() will
collapse the usb_control_msg() return value to 0/-errno, discarding the
actual number of bytes transferred.

Ideally that short command should be detected and error out, but many
printers are known to send "incorrect" responses back so we can't just
do that.

statusbuf is kmalloc(8) at probe time and never filled before the first
LPGETSTATUS ioctl.

usblp_read_status() requests 1 byte. If a malicious printer responds
with zero bytes, *statusbuf is one byte of stale kmalloc heap,
sign-extended into the local int status, which the LPGETSTATUS path then
copy_to_user()s directly to the ioctl caller.

Fix this all by just zapping out the memory buffer when allocated at
probe time.  If a later call does a short read, the data will be
identical to what the device sent it the last time, so there is no
"leak" of information happening.

Cc: Pete Zaitcev <zaitcev@redhat.com>
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026042011-shredder-savage-48c6@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-27 10:00:18 -06:00
Greg Kroah-Hartman
7a400c6fe3 usb: usblp: fix heap leak in IEEE 1284 device ID via short response
usblp_ctrl_msg() collapses the usb_control_msg() return value to
0/-errno, discarding the actual number of bytes transferred.  A broken
printer can complete the GET_DEVICE_ID control transfer short and the
driver has no way to know.

usblp_cache_device_id_string() reads the 2-byte big-endian length prefix
from the response and trusts it (clamped only to the buffer bounds).
The buffer is kmalloc(1024) at probe time. A device that sends exactly
two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves
device_id_string[2..1022] holding stale kmalloc heap.

That stale data is then exposed:
  - via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated
    at the first NUL in the stale heap), and
  - via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full
    claimed length regardless of NULs, up to 1021 bytes of uninitialized
    heap, with the leak size chosen by the device.

Fix this up by just zapping the buffer with zeros before each request
sent to the device.

Cc: Pete Zaitcev <zaitcev@redhat.com>
Assisted-by: gkh_clanker_t1000
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/2026042002-unicorn-greedily-3c63@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-27 10:00:16 -06:00
Selvarasu Ganesan
aad35f9c92 usb: dwc3: Move GUID programming after PHY initialization
The Linux Version Code is currently written to the GUID register before
PHY initialization. Certain PHY implementations (such as Synopsys eUSB
PHY performing link_sw_reset) clear the GUID register to its default
value during initialization, causing the kernel version information to
be lost.

Move the GUID register programming to occur after PHY initialization
completes to ensure the Linux version information persists.

Fixes: fa0ea13e9f ("usb: dwc3: core: write LINUX_VERSION_CODE to our GUID register")
Cc: stable <stable@kernel.org>
Reported-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260417063314.2359-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-27 09:57:26 -06:00
Xu Yang
f6ec9bb4ac usb: typec: tcpm: fix debug accessory mode detection for sink ports
The port in debug accessory mode can be either a source or sink. The
previous tcpm_port_is_debug() function only checked for source port.

Commit 8db73e6a42 ("usb: typec: tcpm: allow sink (ufp) to toggle into
accessory mode debug") changed the detection logic to support both roles,
but left some logic in _tcpm_cc_change() unchanged, This causes the state
machine to transition to an incorrect state when operating as a sink in
debug accessory mode. Log as below:

[  978.637541] CC1: 0 -> 5, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[  978.637567] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS]
[  978.637596] pending state change SRC_ATTACH_WAIT -> DEBUG_ACC_ATTACHED @ 180 ms [rev1 NONE_AMS]
[  978.647098] CC1: 5 -> 0, CC2: 5 -> 5 [state SRC_ATTACH_WAIT, polarity 0, connected]
[  978.647115] state change SRC_ATTACH_WAIT -> SRC_ATTACH_WAIT [rev1 NONE_AMS]

It should go to SNK_ATTACH_WAIT instead of SRC_ATTACH_WAIT state.

To fix this, add tcpm_port_is_debug_source() and tcpm_port_is_debug_sink()
helper to explicitly identify the power mode in debug accessory mode.
Update the state transition logic in _tcpm_cc_change() to ensure the state
machine transitions comply with Type-C specification. Also update the logic
in run_state_machine() to keep consistency.

Fixes: 8db73e6a42 ("usb: typec: tcpm: allow sink (ufp) to toggle into accessory mode debug")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Amit Sunil Dhamne <amitsd@google.com>
Link: https://patch.msgid.link/20260424074009.2979266-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-27 09:56:28 -06:00
Amit Sunil Dhamne
2909f0d499 usb: typec: tcpm: reset internal port states on soft reset AMS
Reset internal port states (such as vdm_sm_running and
explicit_contract) on soft reset AMS as the port needs to negotiate a
new contract. The consequence of leaving the states in as-is cond are as
follows:
  * port is in SRC power role and an explicit contract is negotiated
    with the port partner (in sink role)
  * port partner sends a Soft Reset AMS while VDM State Machine is
    running
  * port accepts the Soft Reset request and the port advertises src caps
  * port partner sends a Request message but since the explicit_contract
    and vdm_sm_running are true from previous negotiation, the port ends
    up sending Soft Reset instead of Accept msg.

Stub Log:
[  203.653942] AMS DISCOVER_IDENTITY start
[  203.653947] PD TX, header: 0x176f
[  203.655901] PD TX complete, status: 0
[  203.657470] PD RX, header: 0x124f [1]
[  203.657477] Rx VDM cmd 0xff008081 type 2 cmd 1 len 1
[  203.657482] AMS DISCOVER_IDENTITY finished
[  203.657484] cc:=4
[  204.155698] PD RX, header: 0x144f [1]
[  204.155718] Rx VDM cmd 0xeeee8001 type 0 cmd 1 len 1
[  204.155741] PD TX, header: 0x196f
[  204.157622] PD TX complete, status: 0
[  204.160060] PD RX, header: 0x4d [1]
[  204.160066] state change SRC_READY -> SOFT_RESET [rev2 SOFT_RESET_AMS]
[  204.160076] PD TX, header: 0x163
[  204.162486] PD TX complete, status: 0
[  204.162832] AMS SOFT_RESET_AMS finished
[  204.162840] cc:=4
[  204.162891] AMS POWER_NEGOTIATION start
[  204.162896] state change SOFT_RESET -> AMS_START [rev2 POWER_NEGOTIATION]
[  204.162908] state change AMS_START -> SRC_SEND_CAPABILITIES [rev2 POWER_NEGOTIATION]
[  204.162913] PD TX, header: 0x1361
[  204.165529] PD TX complete, status: 0
[  204.165571] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES_TIMEOUT @ 60 ms [rev2 POWER_NEGOTIATION]
[  204.166996] PD RX, header: 0x1242 [1]
[  204.167009] state change SRC_SEND_CAPABILITIES -> SRC_SOFT_RESET_WAIT_SNK_TX [rev2 POWER_NEGOTIATION]
[  204.167019] AMS POWER_NEGOTIATION finished
[  204.167020] cc:=4
[  204.167083] AMS SOFT_RESET_AMS start
[  204.167086] state change SRC_SOFT_RESET_WAIT_SNK_TX -> SOFT_RESET_SEND [rev2 SOFT_RESET_AMS]
[  204.167092] PD TX, header: 0x16d
[  204.168824] PD TX complete, status: 0
[  204.168854] pending state change SOFT_RESET_SEND -> HARD_RESET_SEND @ 60 ms [rev2 SOFT_RESET_AMS]
[  204.171876] PD RX, header: 0x43 [1]
[  204.171879] AMS SOFT_RESET_AMS finished

This causes COMMON.PROC.PD.11.2 check failure for
TEST.PD.VDM.SRC.2_Rev2Src test on the PD compliance tester.

Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Fixes: 8d3a0578ad ("usb: typec: tcpm: Respond Wait if VDM state machine is running")
Fixes: f0690a25a1 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable <stable@kernel.org>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260414-fix-soft-reset-v1-1-01d7cb9764e2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-27 09:49:43 -06:00
Felix Gu
0b9fcab1b8 usb: ulpi: fix memory leak on ulpi_register() error paths
Commit 01af542392 ("usb: ulpi: fix double free in
ulpi_register_interface() error path") removed kfree(ulpi) from
ulpi_register_interface() to fix a double-free when device_register()
fails.

But when ulpi_of_register() or ulpi_read_id() fail before
device_register() is called, the ulpi allocation is leaked.

Add kfree(ulpi) on both error paths to properly clean up the allocation.

Fixes: 01af542392 ("usb: ulpi: fix double free in ulpi_register_interface() error path")
Cc: stable <stable@kernel.org>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260407-ulpi-v1-1-f3fafe53f7b2@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-27 09:49:43 -06:00
Aaro Koskinen
3f91484f6c USB: omap_udc: DMA: Don't enable burst 4 mode
Commit 65111084c6 ("USB: more omap_udc updates (dma and omap1710)")
added setting for DMA burst 4 mode. But I think this should be undone for
two reasons:

- It breaks DMA on 15xx boards - transfers just silently stall.

- On newer OMAP1 boards, like Nokia 770 (omap1710), there is no measurable
performance impact when testing TCP throughput with g_ether with large
15000 byte MTU size.

It's also worth noting that when the original change was made, the
OMAP_DMA_DATA_BURST_4 handling in arch/arm/plat-omap/dma.c was broken, and
actually resulted in the same as the OMAP_DMA_DATA_BURST_DIS i.e. burst
disabled. This was fixed not until a couple kernel releases later in an
unrelated commit 1a8bfa1eb9 ("[ARM] 3142/1: OMAP 2/5: Update files
common to omap1 and omap2").

So based on this it seems there was never really a very good reason to
enable this burst mode in omap_udc, so remove it now to allow 15xx DMA
to work again (it provides 2x throughput compared to PIO mode).

Fixes: 65111084c6 ("[PATCH] USB: more omap_udc updates (dma and omap1710)")
Cc: stable <stable@kernel.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Link: https://patch.msgid.link/ad06qHLclWHeSGnV@darkstar.musicnaut.iki.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-27 09:49:28 -06:00
Linus Torvalds
a85d6ff994 SCSI misc on 20260421
Usual driver updates (ufs, lpfc, fnic, target, mpi3mr).  The
 substantive core changes are adding a 'serial' sysfs attribute and
 getting sd to support > PAGE_SIZE sectors.
 
 Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
 -----BEGIN PGP SIGNATURE-----
 
 iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaeeTSRsUgAAAAAAEAA5t
 YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
 c2hpcC5jb20ACgkQ50LJTO6YrIXxbAEA+LYW6sZ4JHAKRAlU1kPxlPFP18eBjcHa
 HqWm8/sllyoBAIBt6ldCACW8sP0bLCDTpLz21XZqJGHm7bvR8xkyca0Q
 =oglt
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "Usual driver updates (ufs, lpfc, fnic, target, mpi3mr).

  The substantive core changes are adding a 'serial' sysfs attribute and
  getting sd to support > PAGE_SIZE sectors"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (98 commits)
  scsi: target: Don't validate ignored fields in PROUT PREEMPT
  scsi: qla2xxx: Use nr_cpu_ids instead of NR_CPUS for qp_cpu_map allocation
  scsi: ufs: core: Disable timestamp for Kioxia THGJFJT0E25BAIP
  scsi: mpi3mr: Fix typo
  scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails
  scsi: libsas: Delete unused to_dom_device() and to_dev_attr()
  scsi: storvsc: Handle PERSISTENT_RESERVE_IN truncation for Hyper-V vFC
  scsi: iscsi_tcp: Remove unneeded selections of CRYPTO and CRYPTO_MD5
  scsi: lpfc: Update lpfc version to 15.0.0.0
  scsi: lpfc: Add PCI ID support for LPe42100 series adapters
  scsi: lpfc: Introduce 128G link speed selection and support
  scsi: lpfc: Check ASIC_ID register to aid diagnostics during failed fw updates
  scsi: lpfc: Update construction of SGL when XPSGL is enabled
  scsi: lpfc: Remove deprecated PBDE feature
  scsi: lpfc: Add REG_VFI mailbox cmd error handling
  scsi: lpfc: Log MCQE contents for mbox commands with no context
  scsi: lpfc: Select mailbox rq_create cmd version based on SLI4 if_type
  scsi: lpfc: Break out of IRQ affinity assignment when mask reaches nr_cpu_ids
  scsi: ufs: core: Make the header files self-contained
  scsi: ufs: core: Remove an include directive from ufshcd-crypto.h
  ...
2026-04-21 08:22:18 -07:00
Linus Torvalds
99ef60d119 USB / Thunderbolt changes for 7.1-rc1
Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
 
 Lots of little things in here, nothing major, just constant
 improvements, updates, and new features.  Highlights are:
   - new USB power supply driver support (will cause merge conflicts in
     drivers/power/supply/Makefile, but it's a simple fix)  These changes
     did touch outside of drivers/usb/ but got acks from the relevant
     mantainers for them.
   - dts file updates and conversions
   - string function conversions into "safer" ones
   - new device quirks
   - xhci driver updates
   - usb gadget driver minor fixes
   - typec driver additions and updates
   - small number of thunderbolt driver changes
   - dwc3 driver updates and additions of new hardware support
   - other minor driver updates
 
 All of these have been in the linux-next tree for a while with no
 reported issues
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaeSx6g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynqjQCgqhbj0Pg2DiL+hZ4xEVlsKD8MJsMAn0vbdsR5
 UiYztWABA245P1hO9i+K
 =/fxh
 -----END PGP SIGNATURE-----

Merge tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 7.1-rc1.

  Lots of little things in here, nothing major, just constant
  improvements, updates, and new features. Highlights are:

   - new USB power supply driver support.

     These changes did touch outside of drivers/usb/ but got acks from
     the relevant mantainers for them.

   - dts file updates and conversions

   - string function conversions into "safer" ones

   - new device quirks

   - xhci driver updates

   - usb gadget driver minor fixes

   - typec driver additions and updates

   - small number of thunderbolt driver changes

   - dwc3 driver updates and additions of new hardware support

   - other minor driver updates

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits)
  usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
  dt-bindings: usb: dwc3: add support for StarFive JHB100
  dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
  dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
  dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
  dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
  arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
  drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
  usbip: tools: add hint when no exported devices are found
  USB: serial: iuu_phoenix: fix iuutool author name
  usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
  usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
  usb: gadget: f_hid: Add missing error code
  usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions
  dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding
  USB: of: Simplify with scoped for each OF child loop
  usbip: validate number_of_packets in usbip_pack_ret_submit()
  usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
  usb: core: config: reverse the size check of the SSP isoc endpoint descriptor
  usb: typec: ucsi: Set usb mode on partner change
  ...
2026-04-19 08:47:40 -07:00
Minda Chen
87117347a0 usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
JHB100 contains 2 dwc3 USB controllers and PHYs and working
as USB 2.0 speed. It can working in generic platform and
setting default properties.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Link: https://patch.msgid.link/20260410112500.90432-3-minda.chen@starfivetech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-11 12:02:43 +02:00
Qinghua Zhao
e7d219f430 drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
Fix typo in comment where 'seperate' should be 'separate'.

Signed-off-by: Qinghua Zhao <zqh1630@126.com>
Link: https://patch.msgid.link/20260409145428.18130-1-zqh1630@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-11 12:02:11 +02:00
Greg Kroah-Hartman
a5cc53f047 USB serial updates for 7.1-rc1
Here are the USB serial updates for 7.1-rc1, including:
 
  - use strscpy() instead of strcpy()
  - new modem device id
 
 All have been in linux-next with no reported issues.
 -----BEGIN PGP SIGNATURE-----
 
 iJEEABYKADkWIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCadjwMhsUgAAAAAAEAA5t
 YW51MiwyLjUrMS4xMiwyLDIACgkQC8XNwux9ZQiNXgD8CqMYNAGAgHCenEXaZlEi
 HfQtWJg5E95bW6wgRwzasj0BAOCvTt1K8Bl/fIqrlW/gdza+wIym1NanrEZs/wQu
 M1EG
 =hJqD
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-7.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

Johan writes:

USB serial updates for 7.1-rc1

Here are the USB serial updates for 7.1-rc1, including:

 - use strscpy() instead of strcpy()
 - new modem device id

All have been in linux-next with no reported issues.

* tag 'usb-serial-7.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: iuu_phoenix: fix iuutool author name
  USB: serial: option: add Telit Cinterion FN990A MBIM composition
  USB: serial: ti_usb_3410_5052: use strscpy() instead of strcpy()
2026-04-11 11:58:41 +02:00
Thorsten Blum
37d9c4c055 USB: serial: iuu_phoenix: fix iuutool author name
The original iuutool author is Juan Carlos Borrás - fix the spelling.

Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Johan Hovold <johan@kernel.org>
2026-04-08 09:37:43 +02:00
Greg Kroah-Hartman
8f993d30b9 usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
The block_len read from the host-supplied NTB header is checked against
ntb_max but has no lower bound. When block_len is smaller than
opts->ndp_size, the bounds check of:
	ndp_index > (block_len - opts->ndp_size)
will underflow producing a huge unsigned value that ndp_index can never
exceed, defeating the check entirely.

The same underflow occurs in the datagram index checks against block_len
- opts->dpe_size.  With those checks neutered, a malicious USB host can
choose ndp_index and datagram offsets that point past the actual
transfer, and the skb_put_data() copies adjacent kernel memory into the
network skb.

Fix this by rejecting block lengths that cannot hold at least the NTB
header plus one NDP.  This will make block_len - opts->ndp_size and
block_len - opts->dpe_size both well-defined.

Commit 8d2b1a1ec9 ("CDC-NCM: avoid overflow in sanity checking") fixed
a related class of issues on the host side of NCM.

Fixes: 2b74b0a04d ("USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Link: https://patch.msgid.link/2026040753-baffle-handheld-624d@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-07 13:50:49 +02:00
Greg Kroah-Hartman
c088d5dd2f usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
A broken/bored/mean USB host can overflow the skb_shared_info->frags[]
array on a Linux gadget exposing a Phonet function by sending an
unbounded sequence of full-page OUT transfers.

pn_rx_complete() finalizes the skb only when req->actual < req->length,
where req->length is set to PAGE_SIZE by the gadget.  If the host always
sends exactly PAGE_SIZE bytes per transfer, fp->rx.skb will never be
reset and each completion will add another fragment via
skb_add_rx_frag().  Once nr_frags exceeds MAX_SKB_FRAGS (default 17),
subsequent frag stores overwrite memory adjacent to the shinfo on the
heap.

Drop the skb and account a length error when the frag limit is reached,
matching the fix applied in t7xx by commit f0813bcd2d ("net: wwan:
t7xx: fix potential skb->frags overflow in RX path").

Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Link: https://patch.msgid.link/2026040705-fruit-unloved-0701@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-07 13:50:34 +02:00