kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-28 20:03:05 +00:00
Code Issues Releases Packages Activity
1,286,009 commits 117 branches 5,805 tags 5.9 GiB
Commit graph

157,477 commits

Author SHA1 Message Date
Ido Schimmel
338bb57e4c ipv4: Fix incorrect TOS in route get reply 
The TOS value that is returned to user space in the route get reply is
the one with which the lookup was performed ('fl4->flowi4_tos'). This is
fine when the matched route is configured with a TOS as it would not
match if its TOS value did not match the one with which the lookup was
performed.

However, matching on TOS is only performed when the route's TOS is not
zero. It is therefore possible to have the kernel incorrectly return a
non-zero TOS:

 # ip link add name dummy1 up type dummy
 # ip address add 192.0.2.1/24 dev dummy1
 # ip route get 192.0.2.2 tos 0xfc
 192.0.2.2 tos 0x1c dev dummy1 src 192.0.2.1 uid 0
     cache

Fix by adding a DSCP field to the FIB result structure (inside an
existing 4 bytes hole), populating it in the route lookup and using it
when filling the route get reply.

Output after the patch:

 # ip link add name dummy1 up type dummy
 # ip address add 192.0.2.1/24 dev dummy1
 # ip route get 192.0.2.2 tos 0xfc
 192.0.2.2 dev dummy1 src 192.0.2.1 uid 0
     cache

Fixes: 1a00fee4ff ("ipv4: Remove rt_key_{src,dst,tos} from struct rtable.")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 2024-07-18 11:11:02 +02:00
Shay Drory
c14112a557 driver core: auxiliary bus: Fix documentation of auxiliary_device 
Fix the documentation of the below field of struct auxiliary_device

include/linux/auxiliary_bus.h:150: warning: Function parameter or struct member 'sysfs' not described in 'auxiliary_device'
include/linux/auxiliary_bus.h:150: warning: Excess struct member 'irqs' description in 'auxiliary_device'
include/linux/auxiliary_bus.h:150: warning: Excess struct member 'lock' description in 'auxiliary_device'
include/linux/auxiliary_bus.h:150: warning: Excess struct member 'irq_dir_exists' description in 'auxiliary_device'

Fixes: a808878308 ("driver core: auxiliary bus: show auxiliary device IRQs")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://patch.msgid.link/20240717172916.595808-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2024-07-17 22:13:12 -07:00
Linus Torvalds
51835949dd Networking changes for 6.11. Not much excitement - a handful of large 
patchsets (devmem among them) did not make it in time.
 
 Core & protocols
 ----------------
 
  - Use local_lock in addition to local_bh_disable() to protect per-CPU
    resources in networking, a step closer for local_bh_disable() not
    to act as a big lock on PREEMPT_RT.
 
  - Use flex array for netdevice priv area, ensure its cache alignment.
 
  - Add a sysctl knob to allow user to specify a default rto_min at socket
    init time. Bit of a big hammer but multiple companies were
    independently carrying such patch downstream so clearly it's useful.
 
  - Support scheduling transmission of packets based on CLOCK_TAI.
 
  - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
    using cpusets.
 
  - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
 
  - Allow configuration of multipath hash seed, to both allow synchronizing
    hashing of two routers, and preventing partial accidental sync.
 
  - Improve TCP compliance with RFC 9293 for simultaneous connect().
 
  - Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
    IKE daemon had to do this before, but the kernel can better keep
    track of it.
 
  - Support sending supervision HSR frames with MAC addresses stored in
    ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
 
  - Introduce IPPROTO_SMC for selecting SMC when socket is created.
 
  - Allow UDP GSO transmit from devices with no checksum offload.
 
  - openvswitch: add packet sampling via psample, separating the sampled
    traffic from "upcall" packets sent to user space for forwarding.
 
  - nf_tables: shrink memory consumption for transaction objects.
 
 Things we sprinkled into general kernel code
 --------------------------------------------
 
  - Power Sequencing subsystem (used by Qualcomm Bluetooth driver
    for QCA6390).
 
  - Add IRQ information in sysfs for auxiliary bus.
 
  - Introduce guard definition for local_lock.
 
  - Add aligned flavor of __cacheline_group_{begin, end}() markings for
    grouping fields in structures.
 
 BPF
 ---
 
  - Notify user space (via epoll) when a struct_ops object is getting
    detached/unregistered.
 
  - Add new kfuncs for a generic, open-coded bits iterator.
 
  - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
    bpf_list_head.
 
  - Support resilient split BTF which cuts down on duplication and makes
    BTF as compact as possible WRT BTF from modules.
 
  - Add support for dumping kfunc prototypes from BTF which enables both
    detecting as well as dumping compilable prototypes for kfuncs.
 
  - riscv64 BPF JIT improvements in particular to add 12-argument support
    for BPF trampolines and to utilize bpf_prog_pack for the latter.
 
  - Add the capability to offload the netfilter flowtable in XDP layer
    through kfuncs.
 
 Driver API
 ----------
 
  - Allow users to configure IRQ tresholds between which automatic IRQ
    moderation can choose.
 
  - Expand Power Sourcing (PoE) status with power, class and failure
    reason. Support setting power limits.
 
  - Track additional RSS contexts in the core, make sure configuration
    changes don't break them.
 
  - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
    data paths.
 
  - Support updating firmware on SFP modules.
 
 Tests and tooling
 -----------------
 
  - mptcp: use net/lib.sh to manage netns.
 
  - TCP-AO and TCP-MD5: replace debug prints used by tests with
    tracepoints.
 
  - openvswitch: make test self-contained (don't depend on OvS CLI tools).
 
 Drivers
 -------
 
  - Ethernet high-speed NICs:
    - Broadcom (bnxt):
      - increase the max total outstanding PTP TX packets to 4
      - add timestamping statistics support
      - implement netdev_queue_mgmt_ops
      - support new RSS context API
    - Intel (100G, ice, idpf):
      - implement FEC statistics and dumping signal quality indicators
      - support E825C products (with 56Gbps PHYs)
    - nVidia/Mellanox:
      - support HW-GRO
      - mlx4/mlx5: support per-queue statistics via netlink
      - obey the max number of EQs setting in sub-functions
    - AMD/Solarflare:
      - support new RSS context API
    - AMD/Pensando:
      - ionic: rework fix for doorbell miss to lower overhead
        and skip it on new HW
    - Wangxun:
      - txgbe: support Flow Director perfect filters
 
  - Ethernet NICs consumer, embedded and virtual:
    - Add driver for Tehuti Networks TN40xx chips
    - Add driver for Meta's internal NIC chips
    - Add driver for Ethernet MAC on Airoha EN7581 SoCs
    - Add driver for Renesas Ethernet-TSN devices
    - Google cloud vNIC:
      - flow steering support
    - Microsoft vNIC:
      - support page sizes other than 4KB on ARM64
    - vmware vNIC:
      - support latency measurement (update to version 9)
    - VirtIO net:
      - support for Byte Queue Limits
      - support configuring thresholds for automatic IRQ moderation
      - support for AF_XDP Rx zero-copy
    - Synopsys (stmmac):
      - support for STM32MP13 SoC
      - let platforms select the right PCS implementation
    - TI:
      - icssg-prueth: add multicast filtering support
      - icssg-prueth: enable PTP timestamping and PPS
    - Renesas:
      - ravb: improve Rx performance 30-400% by using page pool,
        theaded NAPI and timer-based IRQ coalescing
      - ravb: add MII support for R-Car V4M
    - Cadence (macb):
      - macb: add ARP support to Wake-On-LAN
    - Cortina:
      - use phylib for RX and TX pause configuration
 
  - Ethernet switches:
    - nVidia/Mellanox:
      - support configuration of multipath hash seed
      - report more accurate max MTU
      - use page_pool to improve Rx performance
    - MediaTek:
      - mt7530: add support for bridge port isolation
    - Qualcomm:
      - qca8k: add support for bridge port isolation
    - Microchip:
      - lan9371/2: add 100BaseTX PHY support
    - NXP:
      - vsc73xx: implement VLAN operations
 
  - Ethernet PHYs:
    - aquantia: enable support for aqr115c
    - aquantia: add support for PHY LEDs
    - realtek: add support for rtl8224 2.5Gbps PHY
    - xpcs: add memory-mapped device support
    - add BroadR-Reach link mode and support in Broadcom's PHY driver
 
  - CAN:
    - add document for ISO 15765-2 protocol support
    - mcp251xfd: workaround for erratum DS80000789E, use timestamps
      to catch when device returns incorrect FIFO status
 
  - WiFi:
    - mac80211/cfg80211:
      - parse Transmit Power Envelope (TPE) data in mac80211 instead of
        in drivers
      - improvements for 6 GHz regulatory flexibility
      - multi-link improvements
      - support multiple radios per wiphy
      - remove DEAUTH_NEED_MGD_TX_PREP flag
    - Intel (iwlwifi):
      - bump FW API to 91 for BZ/SC devices
      - report 64-bit radiotap timestamp
      - enable P2P low latency by default
      - handle Transmit Power Envelope (TPE) advertised by AP
      - remove support for older FW for new devices
      - fast resume (keeping the device configured)
      - mvm: re-enable Multi-Link Operation (MLO)
      - aggregation (A-MSDU) optimizations
    - MediaTek (mt76):
      - mt7925 Multi-Link Operation (MLO) support
    - Qualcomm (ath10k):
      - LED support for various chipsets
    - Qualcomm (ath12k):
      - remove unsupported Tx monitor handling
      - support channel 2 in 6 GHz band
      - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
      - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
        Advertisements (EMA)
      - support dynamic VLAN
      - add panic handler for resetting the firmware state
      - DebugFS support for datapath statistics
      - WCN7850: support for Wake on WLAN
    - Microchip (wilc1000):
      - read MAC address during probe to make it visible to user space
      - suspend/resume improvements
    - TI (wl18xx):
      - support newer firmware versions
    - RealTek (rtw89):
      - preparation for RTL8852BE-VT support
      - Wake on WLAN support for WiFi 6 chips
      - 36-bit PCI DMA support
    - RealTek (rtlwifi):
      - RTL8192DU support
    - Broadcom (brcmfmac):
      - Management Frame Protection support (to enable WPA3)
 
  - Bluetooth:
    - qualcomm: use the power sequencer for QCA6390
    - btusb: mediatek: add ISO data transmission functions
    - hci_bcm4377: add BCM4388 support
    - btintel: add support for BlazarU core
    - btintel: add support for Whale Peak2
    - btnxpuart: add support for AW693 A1 chipset
    - btnxpuart: add support for IW615 chipset
    - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmaWjBwACgkQMUZtbf5S
 IrvuSRAAkJuEzTRqgURBCe4eNEQde6mJJig7l2CKHwCbFiHZpRkFHf8qKbcGWbL6
 uLW33SWnKtJVDhxVKWHLq635XW7BAa80YhqGw21GDi+mIEhWXZglHj3xbXNxsMfE
 4eg/kG4BkfYWFmHaXOwVWV/mr7nXf6j7WmXNeXEi32ufE1j0OL+YlQenKnMj8yP2
 j9JmYa2Chwppng1SblHmcjmGkdNVwFhStKeCG+2K7v06wdDH/QYBlbgUv9gw/cxp
 NlW//wgiaeX40U4O3kDwt9C+LDoh+0VrDDeVdQ+IsScLtY3PhAzEoKolFYTq2HSr
 I1JpoaHNnyNsJq3DZrACQ5WlH4yDn6C2EUB6dxNnFaI9F1ZPsi+7MTl6Sei1AklD
 TuQTj/lxOACBwW2Q77NU72uoxiIUauesGPHcnrAFuoCIEhZF0mso7k59BvrXhsOP
 QwcLbQdc1YHNkqv/Vc7NBY+ruMsYB+5Ubbhhj2p27dp/CWFIwxI29fze4dn2uhO6
 ejHN3mbqwPdSzg12YJtM6Iq61Cnwo2eVSvhTxl+ZVSZtI4nu2arzR+y7QTYmNrXP
 6tkgVN9UsWeLl2xJ8wyyqL5mcvNHP2rPXWZ2X56iTaa26m+UlleeQ7YRaYtQAAr0
 Ec/vlDMX64SwHhd+qwE99DXGQf2g+KklHKSLsnajJUVrWFTlRI0=
 =opz8
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Not much excitement - a handful of large patchsets (devmem among them)
  did not make it in time.

  Core & protocols:

   - Use local_lock in addition to local_bh_disable() to protect per-CPU
     resources in networking, a step closer for local_bh_disable() not
     to act as a big lock on PREEMPT_RT

   - Use flex array for netdevice priv area, ensure its cache alignment

   - Add a sysctl knob to allow user to specify a default rto_min at
     socket init time. Bit of a big hammer but multiple companies were
     independently carrying such patch downstream so clearly it's useful

   - Support scheduling transmission of packets based on CLOCK_TAI

   - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
     off using cpusets

   - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address

   - Allow configuration of multipath hash seed, to both allow
     synchronizing hashing of two routers, and preventing partial
     accidental sync

   - Improve TCP compliance with RFC 9293 for simultaneous connect()

   - Support sending NAT keepalives in IPsec ESP in UDP states.
     Userspace IKE daemon had to do this before, but the kernel can
     better keep track of it

   - Support sending supervision HSR frames with MAC addresses stored in
     ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled

   - Introduce IPPROTO_SMC for selecting SMC when socket is created

   - Allow UDP GSO transmit from devices with no checksum offload

   - openvswitch: add packet sampling via psample, separating the
     sampled traffic from "upcall" packets sent to user space for
     forwarding

   - nf_tables: shrink memory consumption for transaction objects

  Things we sprinkled into general kernel code:

   - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
     QCA6390)           [ Already merged separately - Linus ]

   - Add IRQ information in sysfs for auxiliary bus

   - Introduce guard definition for local_lock

   - Add aligned flavor of __cacheline_group_{begin, end}() markings for
     grouping fields in structures

  BPF:

   - Notify user space (via epoll) when a struct_ops object is getting
     detached/unregistered

   - Add new kfuncs for a generic, open-coded bits iterator

   - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
     bpf_list_head

   - Support resilient split BTF which cuts down on duplication and
     makes BTF as compact as possible WRT BTF from modules

   - Add support for dumping kfunc prototypes from BTF which enables
     both detecting as well as dumping compilable prototypes for kfuncs

   - riscv64 BPF JIT improvements in particular to add 12-argument
     support for BPF trampolines and to utilize bpf_prog_pack for the
     latter

   - Add the capability to offload the netfilter flowtable in XDP layer
     through kfuncs

  Driver API:

   - Allow users to configure IRQ tresholds between which automatic IRQ
     moderation can choose

   - Expand Power Sourcing (PoE) status with power, class and failure
     reason. Support setting power limits

   - Track additional RSS contexts in the core, make sure configuration
     changes don't break them

   - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
     ESP data paths

   - Support updating firmware on SFP modules

  Tests and tooling:

   - mptcp: use net/lib.sh to manage netns

   - TCP-AO and TCP-MD5: replace debug prints used by tests with
     tracepoints

   - openvswitch: make test self-contained (don't depend on OvS CLI
     tools)

  Drivers:

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - increase the max total outstanding PTP TX packets to 4
         - add timestamping statistics support
         - implement netdev_queue_mgmt_ops
         - support new RSS context API
      - Intel (100G, ice, idpf):
         - implement FEC statistics and dumping signal quality indicators
         - support E825C products (with 56Gbps PHYs)
      - nVidia/Mellanox:
         - support HW-GRO
         - mlx4/mlx5: support per-queue statistics via netlink
         - obey the max number of EQs setting in sub-functions
      - AMD/Solarflare:
         - support new RSS context API
      - AMD/Pensando:
         - ionic: rework fix for doorbell miss to lower overhead and
           skip it on new HW
      - Wangxun:
         - txgbe: support Flow Director perfect filters

   - Ethernet NICs consumer, embedded and virtual:
      - Add driver for Tehuti Networks TN40xx chips
      - Add driver for Meta's internal NIC chips
      - Add driver for Ethernet MAC on Airoha EN7581 SoCs
      - Add driver for Renesas Ethernet-TSN devices
      - Google cloud vNIC:
         - flow steering support
      - Microsoft vNIC:
         - support page sizes other than 4KB on ARM64
      - vmware vNIC:
         - support latency measurement (update to version 9)
      - VirtIO net:
         - support for Byte Queue Limits
         - support configuring thresholds for automatic IRQ moderation
         - support for AF_XDP Rx zero-copy
      - Synopsys (stmmac):
         - support for STM32MP13 SoC
         - let platforms select the right PCS implementation
      - TI:
         - icssg-prueth: add multicast filtering support
         - icssg-prueth: enable PTP timestamping and PPS
      - Renesas:
         - ravb: improve Rx performance 30-400% by using page pool,
           theaded NAPI and timer-based IRQ coalescing
         - ravb: add MII support for R-Car V4M
      - Cadence (macb):
         - macb: add ARP support to Wake-On-LAN
      - Cortina:
         - use phylib for RX and TX pause configuration

   - Ethernet switches:
      - nVidia/Mellanox:
         - support configuration of multipath hash seed
         - report more accurate max MTU
         - use page_pool to improve Rx performance
      - MediaTek:
         - mt7530: add support for bridge port isolation
      - Qualcomm:
         - qca8k: add support for bridge port isolation
      - Microchip:
         - lan9371/2: add 100BaseTX PHY support
      - NXP:
         - vsc73xx: implement VLAN operations

   - Ethernet PHYs:
      - aquantia: enable support for aqr115c
      - aquantia: add support for PHY LEDs
      - realtek: add support for rtl8224 2.5Gbps PHY
      - xpcs: add memory-mapped device support
      - add BroadR-Reach link mode and support in Broadcom's PHY driver

   - CAN:
      - add document for ISO 15765-2 protocol support
      - mcp251xfd: workaround for erratum DS80000789E, use timestamps to
        catch when device returns incorrect FIFO status

   - WiFi:
      - mac80211/cfg80211:
         - parse Transmit Power Envelope (TPE) data in mac80211 instead
           of in drivers
         - improvements for 6 GHz regulatory flexibility
         - multi-link improvements
         - support multiple radios per wiphy
         - remove DEAUTH_NEED_MGD_TX_PREP flag
      - Intel (iwlwifi):
         - bump FW API to 91 for BZ/SC devices
         - report 64-bit radiotap timestamp
         - enable P2P low latency by default
         - handle Transmit Power Envelope (TPE) advertised by AP
         - remove support for older FW for new devices
         - fast resume (keeping the device configured)
         - mvm: re-enable Multi-Link Operation (MLO)
         - aggregation (A-MSDU) optimizations
      - MediaTek (mt76):
         - mt7925 Multi-Link Operation (MLO) support
      - Qualcomm (ath10k):
         - LED support for various chipsets
      - Qualcomm (ath12k):
         - remove unsupported Tx monitor handling
         - support channel 2 in 6 GHz band
         - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
         - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
           Advertisements (EMA)
         - support dynamic VLAN
         - add panic handler for resetting the firmware state
         - DebugFS support for datapath statistics
         - WCN7850: support for Wake on WLAN
      - Microchip (wilc1000):
         - read MAC address during probe to make it visible to user space
         - suspend/resume improvements
      - TI (wl18xx):
         - support newer firmware versions
      - RealTek (rtw89):
         - preparation for RTL8852BE-VT support
         - Wake on WLAN support for WiFi 6 chips
         - 36-bit PCI DMA support
      - RealTek (rtlwifi):
         - RTL8192DU support
      - Broadcom (brcmfmac):
         - Management Frame Protection support (to enable WPA3)

   - Bluetooth:
      - qualcomm: use the power sequencer for QCA6390
      - btusb: mediatek: add ISO data transmission functions
      - hci_bcm4377: add BCM4388 support
      - btintel: add support for BlazarU core
      - btintel: add support for Whale Peak2
      - btnxpuart: add support for AW693 A1 chipset
      - btnxpuart: add support for IW615 chipset
      - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"

* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
  eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
  tcp: Replace strncpy() with strscpy()
  wifi: ath12k: fix build vs old compiler
  tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
  eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
  eth: fbnic: Add L2 address programming
  eth: fbnic: Add basic Rx handling
  eth: fbnic: Add basic Tx handling
  eth: fbnic: Add link detection
  eth: fbnic: Add initial messaging to notify FW of our presence
  eth: fbnic: Implement Rx queue alloc/start/stop/free
  eth: fbnic: Implement Tx queue alloc/start/stop/free
  eth: fbnic: Allocate a netdevice and napi vectors with queues
  eth: fbnic: Add FW communication mechanism
  eth: fbnic: Add message parsing for FW messages
  eth: fbnic: Add register init to set PCIe/Ethernet device config
  eth: fbnic: Allocate core device specific structures and devlink interface
  eth: fbnic: Add scaffolding for Meta's NIC driver
  PCI: Add Meta Platforms vendor ID
  net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
  ...
 2024-07-16 19:28:34 -07:00
Linus Torvalds
f8d22a3195 linux_kselftest-kunit-6.11-rc1 
This KUnit next update for Linux 6.11-rc1 consists of:
 
 -- adds vm_mmap() allocation resource manager
 -- converts usercopy kselftest to KUnit
 -- disables usercopy testing on !CONFIG_MMU
 -- adds MODULE_DESCRIPTION() to core, list, and usercopy tests
 -- adds tests for assertion formatting functions - assert.c
 -- introduces KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
 -- fixes KUNIT_ASSERT_STRNEQ comments to make it clear that it is
    an assertion
 -- renames KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmaWpCYACgkQCwJExA0N
 QxwdPQ/9G26Q+xhbieosvXHu/04ZWTcuUP/cFRv56jLH9bKm25YbW8WZzKM/imE5
 So35IT6SIYlwxn9fYyriPz372h3ZC522cu8tIVrUh5Uo3O5LbzQqdrxos9a+RuCg
 u6lenSksAjJRZ3S3IKDJ1ErxLnPYKyjjZFwDmV1+0Xxy30SwzFEbQqj9lY2Q4iGs
 KWBm0lrFPipbHdBqZcPB/mxIDyF6rhe+oeuOPU8uag6ncNN31xMpDanU8O6XEAz9
 QoAiDICANbVKTRKG5xXgmsJtyLF8GON4e49kEYtCLdnESPc39hQtf3cTHeYI22HC
 7OWhhOySifNIukFj1hVtxnN3ZfjtBGmbCwe5rXZFvMovE3YwAplKK61GoOaI9UV0
 qPk5GGrAb/xEh2HZ9tgf8+CsqmnPQLGnVt2h3u3c28u4YzbkinqVj20KYsye39zz
 KzJsO2yDJH4LlIJjc8XWof1cyyo0TIJQVOwJqAieOPePnfs4zabmVOus8y1Cj07V
 iAvQTPPoZ165zA1cl0iSMolKkXeAgf2FjlEGbODrktKKX6Ag/PKVp3e6PW28zJbp
 0p1V1IDQQAlEhbcRAZb+5y1voh+hcy++KyPwpj7lAVkmHd7RoK/mDL3W+oLdOTrB
 aXWs4JOlkmtUaz3EpAQZuvhYWVW7DexR9rU1SF44UAVzSdZSndw=
 =nnFR
 -----END PGP SIGNATURE-----

Merge tag 'linux_kselftest-kunit-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan:

 - add vm_mmap() allocation resource manager

 - convert usercopy kselftest to KUnit

 - disable usercopy testing on !CONFIG_MMU

 - add MODULE_DESCRIPTION() to core, list, and usercopy tests

 - add tests for assertion formatting functions - assert.c

 - introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros

 - fix KUNIT_ASSERT_STRNEQ comments to make it clear that it is an
   assertion

 - rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT

* tag 'linux_kselftest-kunit-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: Introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
  kunit: Rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT for readability
  kunit: Fix the comment of KUNIT_ASSERT_STRNEQ as assertion
  kunit: executor: Simplify string allocation handling
  kunit/usercopy: Add missing MODULE_DESCRIPTION()
  kunit/usercopy: Disable testing on !CONFIG_MMU
  usercopy: Convert test_user_copy to KUnit test
  kunit: test: Add vm_mmap() allocation resource manager
  list: test: add the missing MODULE_DESCRIPTION() macro
  kunit: add missing MODULE_DESCRIPTION() macros to core modules
  list: test: remove unused struct 'klist_test_struct'
  kunit: Cover 'assert.c' with tests
 2024-07-16 17:42:14 -07:00
Linus Torvalds
576a997c63 Performance events changes for v6.11: 
- Intel PT support enhancements & fixes
  - Fix leaked SIGTRAP events
  - Improve and fix the Intel uncore driver
  - Add support for Intel HBM and CXL uncore counters
  - Add Intel Lake and Arrow Lake support
  - AMD uncore driver fixes
  - Make SIGTRAP and __perf_pending_irq() work on RT
  - Micro-optimizations
  - Misc cleanups and fixes
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmaWjncRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1iZyg//TSafjCK4N9fyXrPdPqf8L7ntX5uYf0rd
 uVZpEo/+VGvuFhznHnZIV2DLetvuwYZcUWszCqQMYfokGGi6WI1/k4MeZkSpN5QE
 p5mFk6gW3cmpHT9bECg7mKQH+w7Qna/b6mnA0HYTFxPGmQKdQDl1/S+ZsgWedxpC
 4V3re7/FzenFVS45DwSMPi9s7uZzZhVhTSgb4XLy+0Da4S0iRULItBa8HT8HmqE5
 v5aQlw3mmwKPUWvyPMi3Sw6RRWK3C+n5ZxWswSYoLSM3dsp1ZD+YYqtOv2GqAx8v
 JoL0SOnGnNCfxGHh0kz5D2hztDvq61Enotih2gz7HxvdWh2DasNp4yS1USGQhu5h
 VJnKNA0TfOUaYqWFVj0EgRVhDX79lMwSHTkR1DZd4vM2GDigHeRPh0zGSn2w/koV
 oCRxFfBoktHBnX0Te1NE2BhojbuKp25vTGK6GriVcHt/RNpuz6hTxsjdJzHCAlVX
 M349l0EpUJafvfaIN9zF22uw22J8P9y9JYqI6ebkUIKiuoT9LuafVYhQupSE9H4u
 IqlozPCTNw6eAQcUo03gkl3n+SY/DZH6eU2ycKgEp3r7TDGYbJPwxY1BgOHbwi4U
 lySM07leso2accSVAz7GDMI3ejj6Sx64asWS1FSwbajDflouaIK2jtey+1IOdXfv
 hHY65tomV8U=
 =gguT
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull performance events updates from Ingo Molnar:

 - Intel PT support enhancements & fixes

 - Fix leaked SIGTRAP events

 - Improve and fix the Intel uncore driver

 - Add support for Intel HBM and CXL uncore counters

 - Add Intel Lake and Arrow Lake support

 - AMD uncore driver fixes

 - Make SIGTRAP and __perf_pending_irq() work on RT

 - Micro-optimizations

 - Misc cleanups and fixes

* tag 'perf-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  perf/x86/intel: Add a distinct name for Granite Rapids
  perf/x86/intel/ds: Fix non 0 retire latency on Raptorlake
  perf/x86/intel: Hide Topdown metrics events if the feature is not enumerated
  perf/x86/intel/uncore: Fix the bits of the CHA extended umask for SPR
  perf: Split __perf_pending_irq() out of perf_pending_irq()
  perf: Don't disable preemption in perf_pending_task().
  perf: Move swevent_htable::recursion into task_struct.
  perf: Shrink the size of the recursion counter.
  perf: Enqueue SIGTRAP always via task_work.
  task_work: Add TWA_NMI_CURRENT as an additional notify mode.
  perf: Move irq_work_queue() where the event is prepared.
  perf: Fix event leak upon exec and file release
  perf: Fix event leak upon exit
  task_work: Introduce task_work_cancel() again
  task_work: s/task_work_cancel()/task_work_cancel_func()/
  perf/x86/amd/uncore: Fix DF and UMC domain identification
  perf/x86/amd/uncore: Avoid PMU registration if counters are unavailable
  perf/x86/intel: Support Perfmon MSRs aliasing
  perf/x86/intel: Support PERFEVTSEL extension
  perf/x86: Add config_mask to represent EVENTSEL bitmask
  ...
 2024-07-16 17:13:31 -07:00
Linus Torvalds
4a996d90b9 Scheduler changes for v6.11: 
- Update Daniel Bristot de Oliveira's entry in MAINTAINERS,
    and credit him in CREDITS.
 
  - Harmonize the lock-yielding behavior on dynamically selected
    preemption models with static ones.
 
  - Reorganize the code a bit: split out sched/syscalls.c to reduce
    the size of sched/core.c
 
  - Micro-optimize psi_group_change()
 
  - Fix set_load_weight() for SCHED_IDLE tasks
 
  - Misc cleanups & fixes
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmaVtVARHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1iqTQ/9GLNzNBnl0oBWCiybeQjyWsZ6BiZi48R0
 C1g9/RKy++OyGOjn/yqYK0Kg8cdfoGzHGioMMAucHFW1nXZwVw17xAJK127N0apF
 83up7AnFJw/JGr1bI0FwuozqHAs4Z5KzHTv2KBxhYuO77lyYna6/t0liRUbF8ZUZ
 I/nqav7wDB8RBIB5hEJ/uYLDX7qWdUlyFB+mcvV4ANA99yr++OgipCp6Ob3Rz3cP
 O676nKJY4vpNbZ/B6bpKg8ezULRP8re2qD3GJRf2huS63uu/Z5ct7ouLVZ1DwN53
 mFDBTYUMI2ToV0pseikuqwnmrjxAKcEajTyZpD3vckafd2TlWIopkQZoQ9XLLlIZ
 DxO+KoekaHTSVy8FWlO8O+iE3IAdUUgECEpNveX45Pb7nFP+5dtFqqnVIdNqCq5e
 zEuQvizaa5m+A1POZhZKya+z9jbLXXx+gtPCbbADTBWtuyl8azUIh3vjn0bykmv4
 IVV/wvUm+BPEIhnKusZZOgB0vLtxUdntBBfUSxqoSOad9L+0/UtSKoKI6wvW00q8
 ZkW+85yS3YFiN9W61276RLis2j7OAjE0eDJ96wfhooma2JRDJU4Wmg5oWg8x3WuA
 JRmK0s63Qik5gpwG5rHQsR5jNqYWTj5Lp7So+M1kRfFsOM/RXQ/AneSXZu/P7d65
 LnYWzbKu76c=
 =lLab
 -----END PGP SIGNATURE-----

Merge tag 'sched-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:

 - Update Daniel Bristot de Oliveira's entry in MAINTAINERS,
   and credit him in CREDITS

 - Harmonize the lock-yielding behavior on dynamically selected
   preemption models with static ones

 - Reorganize the code a bit: split out sched/syscalls.c to reduce
   the size of sched/core.c

 - Micro-optimize psi_group_change()

 - Fix set_load_weight() for SCHED_IDLE tasks

 - Misc cleanups & fixes

* tag 'sched-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Update MAINTAINERS and CREDITS
  sched/fair: set_load_weight() must also call reweight_task() for SCHED_IDLE tasks
  sched/psi: Optimise psi_group_change a bit
  sched/core: Drop spinlocks on contention iff kernel is preemptible
  sched/core: Move preempt_model_*() helpers from sched.h to preempt.h
  sched/balance: Skip unnecessary updates to idle load balancer's flags
  idle: Remove stale RCU comment
  sched/headers: Move struct pre-declarations to the beginning of the header
  sched/core: Clean up kernel/sched/sched.h a bit
  sched/core: Simplify prefetch_curr_exec_start()
  sched: Fix spelling in comments
  sched/syscalls: Split out kernel/sched/syscalls.c from kernel/sched/core.c
 2024-07-16 17:00:50 -07:00
Linus Torvalds
151647ab58 Locking changes for v6.11: 
- Jump label fixes, including a perf events fix that originally
    manifested as jump label failures, but was a serialization bug
    at the usage site.
 
  - Mark down_write*() helpers as __always_inline, to improve
    WCHAN debuggability.
 
  - Misc cleanups and fixes.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmaVEV8RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1iWbQ/+KBa29udVx0qiX/1R/+4EBNKzFDyvhobu
 9XuAUZJZ9g46PFqnXlnA/VhGff52M2I+1scva11OPnb2NnOhAN1yUFQJaZh0HM+y
 GTsaLQEdJfNKv1Z0i05AnYE7BKFEnoksWInsOg6Or5KoML5RS6vIyLWsBQpCjelM
 ZxAYNHVpI5qeeUT7dqy9bkBxUXgOpc5X5+qZmmBnBDTGvhsPviV88gL1Ol2tjmGi
 hhALK9RdLMltrNEejDc9sBcLw/qRA5QOUDDxSoBykSOBaljJB+3BcTCuXdUJT24Y
 xpufbESHyl7HAmdvRU+n4ypo4kuKSIcyF1+V6LcMmNi0jSsyUG7x+SuhJetQHd2z
 kLsYD18JbHHBVz7/047DnVTtyTcifsDpJi4MqEYYrUhMw1ns/goEiLRgSEYdB/FT
 eCjdZxbCzkKzmV42/gqkM/mv8/pWkhvAqZ1/LNkHSOR/JSa5X3NeR0qrj18OKSrS
 Du+ycGDqk1PqVcqiC1heBayIU/QoY/sEkdktTtbAKSujKCJ+tYhPtqMki6JaOh5I
 VPp9ekcbs+Vvuu1qNDcueoe3TqxO2wfchKMNcSD8+I68EZtxHWZN3iHtTOlqGYVr
 uZuG0V2WSgGvUi7k0UIPpnnmZ2+XejA++VnjVitXM3Z+xf7MlrPNy/4fzUbkgTQn
 T8/Tt7SytQE=
 =T1KT
 -----END PGP SIGNATURE-----

Merge tag 'locking-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull locking updates from Ingo Molnar:

 - Jump label fixes, including a perf events fix that originally
   manifested as jump label failures, but was a serialization bug at the
   usage site

 - Mark down_write*() helpers as __always_inline, to improve WCHAN
   debuggability

 - Misc cleanups and fixes

* tag 'locking-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Add __always_inline annotation to __down_write_common() and inlined callers
  jump_label: Simplify and clarify static_key_fast_inc_cpus_locked()
  jump_label: Clarify condition in static_key_fast_inc_not_disabled()
  jump_label: Fix concurrency issues in static_key_slow_dec()
  perf/x86: Serialize set_attr_rdpmc()
  cleanup: Standardize the header guard define's name
 2024-07-16 16:42:37 -07:00
Linus Torvalds
923a327e8f ACPI updates for 6.11-rc1 
- Switch the ACPI x86 utility code and the ACPI LPSS driver to new
    Intel CPU model defines (Tony Luck).
 
  - Add hwmon interface support to the ACPI fan driver (Armin Wolf).
 
  - Add sysfs entry for guaranteed performance to the ACPI CPPC library
    and replace a ternary operator with umax() in it (Petr Tesařík,
    Prabhakar Pujeri).
 
  - Clean up the ACPI PMIC driver in multiple ways (Andy Shevchenko,
    Christophe JAILLET).
 
  - Add support for charge limiting state to the ACPI battery driver
    and update _OSC to indicate support for it (Armin Wolf).
 
  - Clean up the sysfs interface in the ACPI battery, SBS (smart battery
    subsystem) and AC drivers (Thomas Weißschuh).
 
  - Coordinate header includes in the ACPI NUMA code and make it use
    ACCESS_COORDINATE_CPU when appropriate (Huang Ying, Thorsten Blum).
 
  - Downgrade Intel _OSC and _PDC messages in the ACPI processor driver
    to debug to reduce log noise (Mario Limonciello).
 
  - Still evaluate _OST when _PUR evaluation fails in the ACPI PAD
    (processor aggregator) driver as per the spec (Armin Wolf).
 
  - Skip ACPI IRQ override on Asus Vivobook Pro N6506MJ and N6506MU
    platforms (Tamim Khan).
 
  - Force native mode on some T2 macbooks in the ACPI backlight driver
    and replace strcpy() with strscpy() in it (Orlando Chamberlain,
    Muhammad Qasim Abdul Majeed).
 
  - Add missing MODULE_DESCRIPTION() macros in two places (Jeff Johnson).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmaVcDoSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxScUP/313t9LWMzF31mdYw4Kt8uksHnV5LTyW
 qHayZwdF1N+3GbVLz5NSZDtZ7nzTqrHnKlAqXX6vAM9Jq8Z2qtqakgCsVBM6JIRI
 Kx5Y1ibAPclidSF2tpaoFywNeF3sPUH1HLCHXfUmgNnvpMXMVP9tjP6OLyQqgF+I
 wDwb2Uv0HmsTDkHnlrczYV0XRX1xwjK+2eDwK82JwN6UYhHCnFiTM0S4/CVI0WfN
 a+wHVo0Gd06thUl63lYO8gpYx0GAc6os8vMzx5ESjXNQP9olDiWS1/D8MIoJ6v+G
 jeNu/kEoDRsWTIJdZs6qTsi0WLXnO+ayuLxg5G+LPCbxPQZmetCMxUV+LZ9z14CU
 ggToxGxPQmlXo9e2t9Okg5XQgz6pGOOFGe9GGuo3zVULKLo5qv6HrvFic3be6Xus
 o0tVX2Vqsxy4Ip/1l7uu5Jc36On0/7d6MTtKbFK7DEv1KlE4ll31fqxkSE86ZltQ
 fQnWvITomLC5KBee+rPtoKKQ2hSUonNYApXPSRI9ysgg/4MfQfywfQRyw3IG7soE
 YcuuvxFM/ZOM6AdZtbfqgdOMa0Ox3u2DOpj+Yy2sz+mie1Yc7MkvwwCo+1kPLISV
 2yxEfUXFVuHwZziLGEX2/959uC5vJY7+HjwKK8+/gmi4CACxGQmBLVUDvk8rlreF
 nisCbWtWesB1
 =KZm5
 -----END PGP SIGNATURE-----

Merge tag 'acpi-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "The only kind of new feature added by these is the hwmon interface
  support in the ACPI fan driver. Apart from that, they mostly address
  issues and clean up code.

  Specifics:

   - Switch the ACPI x86 utility code and the ACPI LPSS driver to new
     Intel CPU model defines (Tony Luck)

   - Add hwmon interface support to the ACPI fan driver (Armin Wolf)

   - Add sysfs entry for guaranteed performance to the ACPI CPPC library
     and replace a ternary operator with umax() in it (Petr Tesařík,
     Prabhakar Pujeri)

   - Clean up the ACPI PMIC driver in multiple ways (Andy Shevchenko,
     Christophe JAILLET)

   - Add support for charge limiting state to the ACPI battery driver
     and update _OSC to indicate support for it (Armin Wolf)

   - Clean up the sysfs interface in the ACPI battery, SBS (smart
     battery subsystem) and AC drivers (Thomas Weißschuh)

   - Coordinate header includes in the ACPI NUMA code and make it use
     ACCESS_COORDINATE_CPU when appropriate (Huang Ying, Thorsten Blum)

   - Downgrade Intel _OSC and _PDC messages in the ACPI processor driver
     to debug to reduce log noise (Mario Limonciello)

   - Still evaluate _OST when _PUR evaluation fails in the ACPI PAD
     (processor aggregator) driver as per the spec (Armin Wolf)

   - Skip ACPI IRQ override on Asus Vivobook Pro N6506MJ and N6506MU
     platforms (Tamim Khan)

   - Force native mode on some T2 macbooks in the ACPI backlight driver
     and replace strcpy() with strscpy() in it (Orlando Chamberlain,
     Muhammad Qasim Abdul Majeed)

   - Add missing MODULE_DESCRIPTION() macros in two places (Jeff
     Johnson)"

* tag 'acpi-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (26 commits)
  ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MJ
  ACPI: video: force native for some T2 macbooks
  ACPI: video: Use strscpy() instead of strcpy()
  ACPI: CPPC: Replace ternary operator with umax()
  ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MU
  ACPI: PMIC: Constify struct pmic_table
  ACPI: bus: Indicate support for battery charge limiting thru _OSC
  ACPI: battery: Add support for charge limiting state
  ACPI: processor: Downgrade Intel _OSC and _PDC messages to debug
  ACPI: SBS: manage alarm sysfs attribute through psy core
  ACPI: battery: create alarm sysfs attribute atomically
  ACPI: battery: use sysfs_emit over sprintf
  ACPI: battery: constify powersupply properties
  ACPI: SBS: constify powersupply properties
  ACPI: AC: constify powersupply properties
  ACPI: PMIC: Replace open coded be16_to_cpu()
  ACPI: PMIC: Convert pr_*() to dev_*() printing macros
  ACPI: PMIC: Use sizeof() instead of hard coded value
  ACPI: NUMA: Consolidate header includes
  ACPI: CPPC: add sysfs entry for guaranteed performance
  ...
 2024-07-16 16:19:36 -07:00
Linus Torvalds
41906248d0 Power management updates for 6.11-rc1 
- Add Loongson-3 CPUFreq driver support (Huacai Chen).
 
  - Add support for the Arrow Lake and Lunar Lake platforms and
    the out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
    cpufreq driver, make it support the highest performance change
    interrupt and clean it up (Srinivas Pandruvada).
 
  - Switch cpufreq to new Intel CPU model defines (Tony Luck).
 
  - Simplify the cpufreq driver interface by switching the .exit() driver
    callback to the void return data type (Lizhe, Viresh Kumar).
 
  - Make cpufreq_boost_enabled() return bool (Dhruva Gole).
 
  - Add fast CPPC support to the amd-pstate cpufreq driver, address
    multiple assorted issues in it and clean it up (Perry Yuan, Mario
    Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du).
 
  - Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
    Walklin).
 
  - Fix memory leaks and of_node_put() usage in the sun50i and qcom-nvmem
    cpufreq drivers (Javier Carrasco).
 
  - Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
    Raphael Gallais-Pou).
 
  - Fix deferred probe handling in the TI cpufreq driver and wrong return
    values of ti_opp_supply_probe(), and add OPP tables for the AM62Ax and
    AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser).
 
  - Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
    driver (Jagadeesh Kona).
 
  - Use dev_err_probe() in every error path in probe in the Mediatek
    cpufreq driver (Nícolas Prado).
 
  - Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
    driver (Yang Li).
 
  - Fix system resume handling in the CPPC cpufreq driver (Riwen Lu).
 
  - Improve the teo cpuidle governor and clean up leftover comments from
    the menu cpuidle governor (Christian Loehle).
 
  - Clean up a comment typo in the teo cpuidle governor (Atul Kumar
    Pant).
 
  - Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff
    Johnson).
 
  - Switch the intel_idle driver to new Intel CPU model defines (Tony
    Luck).
 
  - Switch the Intel RAPL driver new Intel CPU model defines (Tony Luck).
 
  - Simplify if condition in the idle_inject driver (Thorsten Blum).
 
  - Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar).
 
  - Introduce an OF helper function to inform if required-opps is used
    and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson).
 
  - Update pm-graph to v5.12 which includes fixes and major code revamp
    for python3.12 (Todd Brandt).
 
  - Address several assorted issues in the cpupower utility (Roman
    Storozhenko).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmaVb+8SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxXIUQALFhNTO+wo8uPWUmsp0SV81Sbf17zM0f
 9IDpzJTUZLK0stTdLtxY4khcClPE4MrwS/LjSJlvkEVZChHpUw6vFezHmx0O42Ti
 Tmv3ezABSAmx6QVRSpyVhE3Hb0BmXW9V+3dtoefofV0JWenN7mqk4Hbb2Jx1Cvbh
 zyerUeWWl97yqVMM2l5owKHSvk7SYO6cfML73XcdXQ6pBfQePfekG87i1+r40l+d
 qEzdyh6JjqGbdkvZKtI4zO1Hdai9FdlLWSqYmVZGS5XRN8RVvDaHDIDlSijNXAei
 DFPFoBVAvl8CymBXXnzDyJJhCCkEb2aX3xD6WzthoCygZt5W+tqfGxyZfViBfb55
 kvpyiWZUVaDyX4Hfz1PLnJ7Xg9kPUKUcDDrsV5vKA7W0Sq2T0RbORsVkaP2nIhlY
 4Xspp9nEv+78DG0UjT7jT0Py2Oq9I6BTG+pmMTxcgA7G/U5H2uAvvIM/kwQ+30vi
 yUxO3W5o9TQmvJF1klHgp3YsCNWZG3IYacHZzUIoPbPusEbevYrCuUNriT+zlANc
 Pv/FMfBfHDmU2lHWyLzuoKhlzQosNi9NajMANBJgd55zACWKzgNzFV4P5gIMd1KR
 moJYfosbT2RWetEH8Zrh7xA5dewUphe6tibshElbKJHilnP0iFjYhhdb6aQRcuPd
 q/RECFYT7z0r
 =imBx
 -----END PGP SIGNATURE-----

Merge tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add a new cpufreq driver for Loongson-3, add support for new
  features in the intel_pstate (Lunar Lake and Arrow Lake platforms, OOB
  mode for Emerald Rapids, highest performance change interrupt),
  amd-pstate (fast CPPC) and sun50i (Allwinner H700 speed bin) cpufreq
  drivers, simplify the cpufreq driver interface, simplify the teo
  cpuidle governor, adjust the pm-graph utility for a new version of
  Python, address issues and clean up code.

  Specifics:

   - Add Loongson-3 CPUFreq driver support (Huacai Chen)

   - Add support for the Arrow Lake and Lunar Lake platforms and the
     out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
     cpufreq driver, make it support the highest performance change
     interrupt and clean it up (Srinivas Pandruvada)

   - Switch cpufreq to new Intel CPU model defines (Tony Luck)

   - Simplify the cpufreq driver interface by switching the .exit()
     driver callback to the void return data type (Lizhe, Viresh Kumar)

   - Make cpufreq_boost_enabled() return bool (Dhruva Gole)

   - Add fast CPPC support to the amd-pstate cpufreq driver, address
     multiple assorted issues in it and clean it up (Perry Yuan, Mario
     Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du)

   - Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
     Walklin)

   - Fix memory leaks and of_node_put() usage in the sun50i and
     qcom-nvmem cpufreq drivers (Javier Carrasco)

   - Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
     Raphael Gallais-Pou)

   - Fix deferred probe handling in the TI cpufreq driver and wrong
     return values of ti_opp_supply_probe(), and add OPP tables for the
     AM62Ax and AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser)

   - Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
     driver (Jagadeesh Kona)

   - Use dev_err_probe() in every error path in probe in the Mediatek
     cpufreq driver (Nícolas Prado)

   - Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
     driver (Yang Li)

   - Fix system resume handling in the CPPC cpufreq driver (Riwen Lu)

   - Improve the teo cpuidle governor and clean up leftover comments
     from the menu cpuidle governor (Christian Loehle)

   - Clean up a comment typo in the teo cpuidle governor (Atul Kumar
     Pant)

   - Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff
     Johnson)

   - Switch the intel_idle driver to new Intel CPU model defines (Tony
     Luck)

   - Switch the Intel RAPL driver new Intel CPU model defines (Tony
     Luck)

   - Simplify if condition in the idle_inject driver (Thorsten Blum)

   - Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar)

   - Introduce an OF helper function to inform if required-opps is used
     and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson)

   - Update pm-graph to v5.12 which includes fixes and major code revamp
     for python3.12 (Todd Brandt)

   - Address several assorted issues in the cpupower utility (Roman
     Storozhenko)"

* tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (77 commits)
  cpufreq: sti: fix build warning
  cpufreq: mediatek: Use dev_err_probe in every error path in probe
  cpufreq: Add Loongson-3 CPUFreq driver support
  cpufreq: Make cpufreq_driver->exit() return void
  cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
  cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
  cpufreq: pcc: Remove empty exit() callback
  cpufreq: loongson2: Remove empty exit() callback
  cpufreq: nforce2: Remove empty exit() callback
  cpupower: fix lib default installation path
  cpufreq: docs: Add missing scaling_available_frequencies description
  cpuidle: teo: Don't count non-existent intercepts
  cpupower: Disable direct build of the 'bench' subproject
  cpuidle: teo: Remove recent intercepts metric
  Revert: "cpuidle: teo: Introduce util-awareness"
  cpufreq: make cpufreq_boost_enabled() return bool
  cpufreq: intel_pstate: Support highest performance change interrupt
  x86/cpufeatures: Add HWP highest perf change feature flag
  Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
  cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
  ...
 2024-07-16 15:54:03 -07:00
Linus Torvalds
15114e8fb5 Thermal control updates for 6.11-rc1 
- Add DLVR and MSI interrupt support for the Lunar Lake platform to the
    int340x thermal driver (Srinivas Pandruvada).
 
  - Enable workload type hints (WLT) support and power floor interrupt
    support for the Lunar Lake platform in int340x ((Srinivas Pandruvada).
 
  - Switch Intel thermal drivers to new Intel CPU model defines (Tony
    Luck).
 
  - Clean up the int3400 and int3403 drivers (Erick Archer and David Alan
    Gilbert).
 
  - Improve intel_pch_thermal kernel log messages printed during suspend
    to idle (Zhang Rui).
 
  - Make the intel_tcc_cooling driver use a model-specific bitmask for
    TCC offset (Ricardo Neri).
 
  - Redesign the .set_trip_temp() thermal zone callback to take a trip
    pointer instead of a trip ID and update its users (Rafael Wysocki).
 
  - Avoid using invalid combinations of polling_delay and passive_delay
    thermal zone parameters (Rafael Wysocki).
 
  - Update a cooling device registration function to take a const
    argument (Krzysztof Kozlowski).
 
  - Make the uniphier thermal driver use thermal_zone_for_each_trip() for
    walking trip points (Rafael Wysocki).
 
  - Fix and clean up several minor shortcomings in thermal debug (Rafael
    Wysocki).
 
  - Rename __thermal_zone_set_trips() to thermal_zone_set_trips() and
    make it use trip thresholds (Rafael Wysocki).
 
  - Use READ_ONCE() for lockless access to trip temperature and
    hysteresis (Rafael Wysocki).
 
  - Drop unnecessary cooling device target state checks from the
    Bang-Bang thermal governor (Rafael Wysocki).
 
  - Avoid invoking thermal governor .trip_crossed() callback for critical
    and hot trip points (Rafael Wysocki).
 
  - Group all Renesas drivers inside a dedicated sub directory and add
    the missing dependency to OF (Niklas Söderlund).
 
  - Add suspend/resume support on k3_j72xx_bandgap and take the
    opportunity to remove an unneeded delay in the init time code
    path (Théo Lebrun).
 
  - Fix thermal zone definition for MT8186 and MT8188 (Julien Panis).
 
  - Convert hisilicon-thermal.txt to dt-schema (Abdulrasaq Lawani).
 
  - Add DT bindings for the X1E80100 temperature sensor (Abel Vesa).
 
  - Fix the thermal zone node name regular expression in the DT schema
    (Krzysztof Kozlowski).
 
  - Avoid failing thermal control initialization by using default values
    on some platforms where calibration data is missing  (Chen-Yu Tsai).
 
  - Fix the sensor cell size in DT for the Exynos platform (Krzysztof
    Kozlowski).
 
  - Bring the common definition of '#thermal-sensor-cells' property in
    order to simplify the bindings on all the platforms where this
    change makes sense and do some minor cleanups (Krzysztof Kozlowski).
 
  - Fix a race between removal and clock disable in the broadcom thermal
    driver (Krzysztof Kozlowski).
 
  - Drop 'trips' DT node as required from the thermal zone bindings in
    order to fix the remaining warnings appearing for thermal zones
    without trip points (Rob Herring).
 
  - Simplify all the drivers where dev_err_probe() can apply (Krzysztof
    Kozlowski).
 
  - Clean up code related to stih416 as this platform is not described
    anywhere (Raphael Gallais-Pou).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmaVb2wSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxNa8P/1GCUk5SNsXA3eLZJYF+9ZN8pbKsiAVI
 QFYSq85fG1+dihcfqxeuXO0NZR2oRYfPtT3MSLU7BQxeIRRCiPqgmUdOAWMrP1O5
 qGDyemcS+lYs2QTfuqMxP0+JkP8vmShP/GmhfYGdE+GtpMlIpiecgCa9Qy+f59Pr
 TNqBpaSM96jxLuQFcEHOD18Hc5zdEIcBCbmq8lBeNQYB3gMkabYAOHPUHRuSxbNG
 MhPF9X4f7JEwysi7NiveJhggDDpJAgLkHmTMjLvAOnOyuXnpWIqEPEbGeYae4eHX
 syWUjdF+wQ5wt1emCEwlGnJp6ctD6/ugMyfsQANdd5PcxElJiqjBHormUwV9kITE
 HccCTFORpwghOPyG+bY1+RZ3qSX2kqiK2OECYnjV6rQBCI8uAnQQAwheobDyaIC+
 bK4bT+pZVEQtZXrdCZaDibzvOiXZqFqtnD8Z+CFvGWALWAFxZcB0qSxUrLa3+ox3
 itDvV00YJ5Wi3vKI9pl5UZKv7Yr22Ulwa8+vSCSkhnaDnBoHAAvCG2trSsri7Cez
 oDLMrcDNYwM1Dm37SrXZ9XL6C6PVoEi8a8q65NQhi6v4wwa8SAC1iF8cQG8lgq5D
 mYeqPH8J+qnGmteW6gI05WWlnRNhsvi4oWHbfCnTS+lnOMiwPh76q9GwiNm61nE4
 QjhWhpzj7MAP
 =+BRm
 -----END PGP SIGNATURE-----

Merge tag 'thermal-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
 "These add some new hardware support (notably, the Lunar Lake platform
  support in int340x and X1E80100 temperature sensor), continue to
  rework the thermal driver interface to eliminate trip point IDs from
  it, update DT bindings for a number of platforms and simplify probe in
  a number of thermal drivers, address issues and clean up code.

  Specifics:

   - Add DLVR and MSI interrupt support for the Lunar Lake platform to
     the int340x thermal driver (Srinivas Pandruvada)

   - Enable workload type hints (WLT) support and power floor interrupt
     support for the Lunar Lake platform in int340x ((Srinivas
     Pandruvada)

   - Switch Intel thermal drivers to new Intel CPU model defines (Tony
     Luck)

   - Clean up the int3400 and int3403 drivers (Erick Archer and David
     Alan Gilbert)

   - Improve intel_pch_thermal kernel log messages printed during
     suspend to idle (Zhang Rui)

   - Make the intel_tcc_cooling driver use a model-specific bitmask for
     TCC offset (Ricardo Neri)

   - Redesign the .set_trip_temp() thermal zone callback to take a trip
     pointer instead of a trip ID and update its users (Rafael Wysocki)

   - Avoid using invalid combinations of polling_delay and passive_delay
     thermal zone parameters (Rafael Wysocki)

   - Update a cooling device registration function to take a const
     argument (Krzysztof Kozlowski)

   - Make the uniphier thermal driver use thermal_zone_for_each_trip()
     for walking trip points (Rafael Wysocki)

   - Fix and clean up several minor shortcomings in thermal debug
     (Rafael Wysocki)

   - Rename __thermal_zone_set_trips() to thermal_zone_set_trips() and
     make it use trip thresholds (Rafael Wysocki)

   - Use READ_ONCE() for lockless access to trip temperature and
     hysteresis (Rafael Wysocki)

   - Drop unnecessary cooling device target state checks from the
     Bang-Bang thermal governor (Rafael Wysocki)

   - Avoid invoking thermal governor .trip_crossed() callback for
     critical and hot trip points (Rafael Wysocki)

   - Group all Renesas drivers inside a dedicated sub directory and add
     the missing dependency to OF (Niklas Söderlund)

   - Add suspend/resume support on k3_j72xx_bandgap and take the
     opportunity to remove an unneeded delay in the init time code path
     (Théo Lebrun)

   - Fix thermal zone definition for MT8186 and MT8188 (Julien Panis)

   - Convert hisilicon-thermal.txt to dt-schema (Abdulrasaq Lawani)

   - Add DT bindings for the X1E80100 temperature sensor (Abel Vesa)

   - Fix the thermal zone node name regular expression in the DT schema
     (Krzysztof Kozlowski)

   - Avoid failing thermal control initialization by using default
     values on some platforms where calibration data is missing (Chen-Yu
     Tsai)

   - Fix the sensor cell size in DT for the Exynos platform (Krzysztof
     Kozlowski)

   - Bring the common definition of '#thermal-sensor-cells' property in
     order to simplify the bindings on all the platforms where this
     change makes sense and do some minor cleanups (Krzysztof Kozlowski)

   - Fix a race between removal and clock disable in the broadcom
     thermal driver (Krzysztof Kozlowski)

   - Drop 'trips' DT node as required from the thermal zone bindings in
     order to fix the remaining warnings appearing for thermal zones
     without trip points (Rob Herring)

   - Simplify all the drivers where dev_err_probe() can apply (Krzysztof
     Kozlowski)

   - Clean up code related to stih416 as this platform is not described
     anywhere (Raphael Gallais-Pou)"

* tag 'thermal-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (81 commits)
  thermal/drivers/sti: Cleanup code related to stih416
  thermal/drivers/generic-adc: Simplify with dev_err_probe()
  thermal/drivers/generic-adc: Simplify probe() with local dev variable
  thermal/drivers/qcom-tsens: Simplify with dev_err_probe()
  thermal/drivers/qcom-spmi-adc-tm5: Simplify with dev_err_probe()
  thermal/drivers/imx: Simplify with dev_err_probe()
  thermal/drivers/imx: Simplify probe() with local dev variable
  thermal/drivers/hisi: Simplify with dev_err_probe()
  thermal/drivers/exynos: Simplify with dev_err_probe()
  thermal/drivers/exynos: Simplify probe() with local dev variable
  thermal/drivers/broadcom: Simplify with dev_err_probe()
  thermal/drivers/broadcom: Simplify probe() with local dev variable
  thermal/drivers/broadcom: Fix race between removal and clock disable
  dt-bindings: thermal: Drop 'trips' node as required
  dt-bindings: thermal: qoriq: reference thermal-sensor schema
  dt-bindings: thermal: cleanup examples indentation
  dt-bindings: thermal: simplify few bindings
  dt-bindings: thermal: ti,j72xx: reference thermal-sensor schema
  dt-bindings: thermal: ti,am654: reference thermal-sensor schema
  dt-bindings: thermal: st,stm32: reference thermal-sensor schema
  ...
 2024-07-16 15:47:19 -07:00
Linus Torvalds
11ab4cd5ec lsm/stable-6.11 PR 20240715 
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmaVT+gUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPr0BAA1JDxr3dcRnylZgQYy9LU9fIbqPhH
 OnV3LsPvuH+dQujluKqjOSaHpxx5EM/DZ+Heot59eY81S/shYnkEg2Z7TvvCAqBD
 2rNjufU4wwisU1RgCTCXMdQ5qgtX+ya5p93Q0r1zRRzkE7qcEZxIbxuN/yRotgiF
 ie5FFA5tk7bEwt4MKCqlvfn8p6yu+YZNLINHcBmOYVVlBd1BPoOlK0TlvT4p/dtM
 z9RSnpuu52HU35w5UJ0hj5I9i/M1LH6cPID5/Uj2/PXVPJkw5FMwNLPGgKVpmswm
 PQZQPsSC7+eKlNLmI98BAfQfYgdk0yShKQkQgnJ1UfZkSx/scLLY/kr7LrbzkOkN
 KI5jhCFsQibQ4CWuOD4mjSJJZCIyKj6TPzXTq0meEAePblnoyAVWO6sUP71tCtFn
 503a3a/kDpvRqv5BRqjOQsxvLTjPHkZCDfZMTnlSU0+U3Ww/gbcnXmkHh9HdUdgQ
 qkyWJmfgiIk2V0aebXchDTxCT3qclvLisxcCJSZm/9EQkc6xKWIQE/YPa4y4UGdk
 tI2U8nKwGimEU4oi6dP3DBYFZc3RNBB3iF+iIveHX2k5+TBqNvESYCN6wRY/TBBb
 TMFjEYyYDEBwvJhzNxioVuJ7u1gxc3EUMfwQPmuJk2oUFEWxbWXucdGeBbpkddrV
 wbUjT9FTVOcS9b0=
 =w5mj
 -----END PGP SIGNATURE-----

Merge tag 'lsm-pr-20240715' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm

Pull lsm updates from Paul Moore:
 "Two LSM patches focused on cleaning up the inode xattr capability
  handling"

* tag 'lsm-pr-20240715' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  selinux,smack: remove the capability checks in the removexattr hooks
  lsm: fixup the inode xattr capability handling
 2024-07-16 14:50:44 -07:00
Linus Torvalds
f8a8b94d06 sysctl changes for 6.11-rc1 
Summary
 
 * Remove "->procname == NULL" check when iterating through sysctl table arrays
 
     Removing sentinels in ctl_table arrays reduces the build time size and
     runtime memory consumed by ~64 bytes per array. With all ctl_table
     sentinels gone, the additional check for ->procname == NULL that worked in
     tandem with the ARRAY_SIZE to calculate the size of the ctl_table arrays is
     no longer needed and has been removed. The sysctl register functions now
     returns an error if a sentinel is used.
 
 * Preparation patches for sysctl constification
 
     Constifying ctl_table structs prevents the modification of proc_handler
     function pointers as they would reside in .rodata. The ctl_table arguments
     in sysctl utility functions are const qualified in preparation for a future
     treewide proc_handler argument constification commit.
 
 * Misc fixes
 
     Increase robustness of set_ownership by providing sane default ownership
     values in case the callee doesn't set them. Bound check proc_dou8vec_minmax
     to avoid loading buggy modules and give sysctl testing module a name to
     avoid compiler complaints.
 
 Testing
 
   * This got push to linux-next in v6.10-rc2, so it has had more than a month
     of testing
 -----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEErkcJVyXmMSXOyyeQupfNUreWQU8FAmaWdz4ACgkQupfNUreW
 QU/WKQwAkSuUz42yCQye77BK+Z8ANcTF1f3aI/wfv2nahq1GaSrNBpqUiXvEe9Tt
 KD2lM1PWiQfizVLIDPh96yxa5q69GQrPPOA/V1jwIXmk/HRpjjoONCFNNXVRCTls
 VCqDz/RatuXvzO35Yn87MnWnxv6PiX7X/zq/3WikVsUI381kvTgC6OwZxdFM52w4
 ESwOa3LeOovtRnqV5dpHr6DCQKyd0N52nPxgXvaerjlsJsv7PlezN7z9YyLOOfmW
 xUD7X6LQcJq7HcEukaB6I9o2GQOi4yYXL2YOzed7qu9Thu+lasEoN3Bd7P+ilXkc
 JY6EXJ5o+d69PewKRuJ1QvD7wrHIkhNMNbMtvehNay124wAHDy3KtonFzyvlX4wE
 qCHBYc6rySJNhSqwVp9MoksOZfDM99pVIOs9YVIjc90Zzu5J7tORgYWRVOHTcAtj
 fd8nMdkK3+ZANapygFCyew6GueIzaqlQwveVgLGw4vc5L3ClknmURit3y487Pzdg
 B+BEVlsp
 =bs2G
 -----END PGP SIGNATURE-----

Merge tag 'sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl

Pull sysctl updates from Joel Granados:

 - Remove "->procname == NULL" check when iterating through sysctl table
   arrays

   Removing sentinels in ctl_table arrays reduces the build time size
   and runtime memory consumed by ~64 bytes per array. With all
   ctl_table sentinels gone, the additional check for ->procname == NULL
   that worked in tandem with the ARRAY_SIZE to calculate the size of
   the ctl_table arrays is no longer needed and has been removed. The
   sysctl register functions now returns an error if a sentinel is used.

 - Preparation patches for sysctl constification

   Constifying ctl_table structs prevents the modification of
   proc_handler function pointers as they would reside in .rodata. The
   ctl_table arguments in sysctl utility functions are const qualified
   in preparation for a future treewide proc_handler argument
   constification commit.

 - Misc fixes

   Increase robustness of set_ownership by providing sane default
   ownership values in case the callee doesn't set them. Bound check
   proc_dou8vec_minmax to avoid loading buggy modules and give sysctl
   testing module a name to avoid compiler complaints.

* tag 'sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
  sysctl: Warn on an empty procname element
  sysctl: Remove ctl_table sentinel code comments
  sysctl: Remove "child" sysctl code comments
  sysctl: Remove superfluous empty allocations from sysctl internals
  sysctl: Replace nr_entries with ctl_table_size in new_links
  sysctl: Remove check for sentinel element in ctl_table arrays
  mm profiling: Remove superfluous sentinel element from ctl_table
  locking: Remove superfluous sentinel element from kern_lockdep_table
  sysctl: Add module description to sysctl-testing
  sysctl: constify ctl_table arguments of utility function
  utsname: constify ctl_table arguments of utility function
  sysctl: move the extra1/2 boundary check of u8 to sysctl_check_table_array
  sysctl: always initialize i_uid/i_gid
 2024-07-16 14:24:29 -07:00
Linus Torvalds
ce5a51bfac hardening updates for v6.11-rc1 
- lkdtm/bugs: add test for hung smp_call_function_single() (Mark Rutland)
 
 - gcc-plugins: Remove duplicate included header file stringpool.h
   (Thorsten Blum)
 
 - ARM: Remove address checking for MMUless devices (Yanjun Yang)
 
 - randomize_kstack: Clean up per-arch entropy and codegen
 
 - KCFI: Make FineIBT mode Kconfig selectable
 
 - fortify: Do not special-case 0-sized destinations
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmaVT2IACgkQiXL039xt
 wCbq8A//RhxTdr+l/h2gyMy/Lcy/NMR9KEWklnxdftuM1V1Kzr53yeH/g6Ehw69g
 e8Ag3Sp7Fn4rNBVa+tY6RqzKwfrUHIbeewGI4LkRe19NDWFWc/Od+4tamfRSPf9c
 GL9ZnJZviRm3zByetwr4CbS69HocXFFSSgcpIv/7xOd+haSWWdvEc3KcSnavY/aq
 8wQPkZxzy8ESkOajZj2k0E2l9JP42Ex20qy0KcjweSSYVafKmbTxhKZgriwAKMCD
 Yj2m55fbD6D08vd0Y6S7H4TPilYtRbulXR9FNMtw59UpKeoUceEmyn4B43psDvau
 9XuJF/oFKrXBEJG+OUZogNu5L6uYUaNdYdtb43upu9lCsjrAjmMYfmXDHO2E40V8
 76MikxHtyFAPEzUwg/BH2CGUu9hil+FADd28s8zLuUBpRDitgYudQD+Cqrc34b6s
 QlAX19bX7KFgXqlsdwy6zJNSd3dpoMBVsP58/EhQQfiqv/ZU2TOryZenz0URlH+k
 ZCAbpXYRAzTyGz23qkutRO+6MiKXoheE7gmd9jESiaqyXe2Q6mIMPyoFU50458TH
 xXhXbZc7War8vbJLyWF7fvK/GlooTHu4xOxfNTsxKWiYShI01iiwG1hH+j4ZDVOG
 NBBK2AfX9GM8AOHJolp5EaGmon0AoVsxbRANSs1K4qZ93WTNGLk=
 =LoG2
 -----END PGP SIGNATURE-----

Merge tag 'hardening-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull hardening updates from Kees Cook:

 - lkdtm/bugs: add test for hung smp_call_function_single() (Mark
   Rutland)

 - gcc-plugins: Remove duplicate included header file stringpool.h
   (Thorsten Blum)

 - ARM: Remove address checking for MMUless devices (Yanjun Yang)

 - randomize_kstack: Clean up per-arch entropy and codegen

 - KCFI: Make FineIBT mode Kconfig selectable

 - fortify: Do not special-case 0-sized destinations

* tag 'hardening-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  randomize_kstack: Improve stack alignment codegen
  ARM: Remove address checking for MMUless devices
  gcc-plugins: Remove duplicate included header file stringpool.h
  randomize_kstack: Remove non-functional per-arch entropy filtering
  fortify: Do not special-case 0-sized destinations
  x86/alternatives: Make FineIBT mode Kconfig selectable
  lkdtm/bugs: add test for hung smp_call_function_single()
 2024-07-16 13:45:43 -07:00
Linus Torvalds
72fda6c8e5 execve updates for v6.11-rc1 
- Use value of kernel.randomize_va_space once per exec (Alexey Dobriyan)
 
 - Honor PT_LOAD alignment for static PIE
 
 - Make bprm->argmin only visible under CONFIG_MMU
 
 - Add KUnit testing of bprm_stack_limits()
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmaVTFAACgkQiXL039xt
 wCYyZw//ZcPV2hu48WqqOImL8LI9HIUaZqKQpixGQRD5VcTRb5MKg8g3Wi4EBHz+
 Kg6QvTEOQdg6NbfE9fH8VIIwcp3dAxdWN6g+3A0HHDSRdb8Ye1ucnzB2kgmEkM1l
 huBRn5tnoS0vn2fxafu1O5tj330kKAvTsemsy316cxmbKNs7ckHdfwuVgZHcuyEt
 OrOA3ZSTWwjkSiA9tatsi5iAQ34tQYGwDEosf06avlnPkQqsRzn3wNlohAPjQF6V
 kjRfX/Mxz2EHa0mjXy2OkhNyPSn6wu0OcmF0ympySHzxm726uRggG+olT5ziUc+2
 DW6Gz6TJ1P8Gu+uTEoz6AY+l5Bpo9ZLYSBm+Mp88sxAT6+Xcc68XeZsFZHmefJzs
 6g6EdmwhDEP/Xd3sIsNphdkS5q1RMgc7tdAtyK8GCaACsHUlU4CfzRYh2mWxpIg6
 hA7oM5KF9FuToLtaIS6K/yYQIVsTKAaA7t+5K/a1RUyKzcJ0O7UpMx1oEge2sPEK
 RnETCYhQs0Cxm11iJ/eqEFzWm0Puxjsjz/P/j5H5U8usx9VUoz0HuS91fNEIY3S9
 y7bn09wxuUv4QddKYgltkurxCCB//Nv7jPYo96pKIW3T56XkfsrYLvNH2W95cCNz
 OMvZImA1J/vQubSODrgeQsfMRsaJodHU3acWyYQ90HmmoWx4JS4=
 =bO7x
 -----END PGP SIGNATURE-----

Merge tag 'execve-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull execve updates from Kees Cook:

 - Use value of kernel.randomize_va_space once per exec (Alexey
   Dobriyan)

 - Honor PT_LOAD alignment for static PIE

 - Make bprm->argmin only visible under CONFIG_MMU

 - Add KUnit testing of bprm_stack_limits()

* tag 'execve-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  exec: Avoid pathological argc, envc, and bprm->p values
  execve: Keep bprm->argmin behind CONFIG_MMU
  ELF: fix kernel.randomize_va_space double read
  exec: Add KUnit test for bprm_stack_limits()
  binfmt_elf: Honor PT_LOAD alignment for static PIE
  binfmt_elf: Calculate total_size earlier
  selftests/exec: Build both static and non-static load_address tests
 2024-07-16 12:59:20 -07:00
Linus Torvalds
f83e38fc9f xen: branch for v6.11-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZpS2TQAKCRCAXGG7T9hj
 vjryAQDy08vSiCNYnO4K0AXO9KhCLsXMpbdevTE0yHdtSW/IwQD/eOmrntgBArA4
 PfQanbzM3Rj+h6p1zsfvW98DgmFrfAQ=
 =tG6C
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen updates from Juergen Gross:

 - some trivial cleanups

 - a fix for the Xen timer

 - add boot time selectable debug capability to the Xen multicall
   handling

 - two fixes for the recently added Xen irqfd handling

* tag 'for-linus-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: remove deprecated xen_nopvspin boot parameter
  x86/xen: eliminate some private header files
  x86/xen: make some functions static
  xen: make multicall debug boot time selectable
  xen/arm: Convert comma to semicolon
  xen: privcmd: Fix possible access to a freed kirqfd instance
  xen: privcmd: Switch from mutex to spinlock for irqfds
  xen: add missing MODULE_DESCRIPTION() macros
  x86/xen: Convert comma to semicolon
  x86/xen/time: Reduce Xen timer tick
  xen/manage: Constify struct shutdown_handler
 2024-07-16 12:30:57 -07:00
Linus Torvalds
e55037c879 EFI updates for v6.11 
- Drop support for the 'fake' EFI memory map on x86
 
 - Add an SMBIOS based tweak to the EFI stub instructing the firmware on
   x86 Macbook Pros to keep both GPUs enabled
 
 - Replace 0-sized array with flexible array in EFI memory attributes
   table handling
 
 - Drop redundant BSS clearing when booting via the native PE entrypoint
   on x86
 
 - Avoid returning EFI_SUCCESS when aborting on an out-of-memory
   condition
 
 - Cosmetic tweak for arm64 KASLR loading logic
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZpTg5gAKCRAwbglWLn0t
 XOrOAQCpZjtjkPRPCBY+t3wUl84rOKiPr1SMHyL50Zl8udJKegD/bnwWSgX3FzLQ
 TN+xjnK7IAxEoKAEWt8lnt04cH5r3As=
 =7VWO
 -----END PGP SIGNATURE-----

Merge tag 'efi-next-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi

Pull EFI updates from Ard Biesheuvel:
 "Note the removal of the EFI fake memory map support - this is believed
  to be unused and no longer worth supporting. However, we could easily
  bring it back if needed.

  With recent developments regarding confidential VMs and unaccepted
  memory, combined with kexec, creating a known inaccurate view of the
  firmware's memory map and handing it to the OS is a feature we can
  live without, hence the removal. Alternatively, I could imagine making
  this feature mutually exclusive with those confidential VM related
  features, but let's try simply removing it first.

  Summary:

   - Drop support for the 'fake' EFI memory map on x86

   - Add an SMBIOS based tweak to the EFI stub instructing the firmware
     on x86 Macbook Pros to keep both GPUs enabled

   - Replace 0-sized array with flexible array in EFI memory attributes
     table handling

   - Drop redundant BSS clearing when booting via the native PE
     entrypoint on x86

   - Avoid returning EFI_SUCCESS when aborting on an out-of-memory
     condition

   - Cosmetic tweak for arm64 KASLR loading logic"

* tag 'efi-next-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: Replace efi_memory_attributes_table_t 0-sized array with flexible array
  efi: Rename efi_early_memdesc_ptr() to efi_memdesc_ptr()
  arm64/efistub: Clean up KASLR logic
  x86/efistub: Drop redundant clearing of BSS
  x86/efistub: Avoid returning EFI_SUCCESS on error
  x86/efistub: Call Apple set_os protocol on dual GPU Intel Macs
  x86/efistub: Enable SMBIOS protocol handling for x86
  efistub/smbios: Simplify SMBIOS enumeration API
  x86/efi: Drop support for fake EFI memory maps
 2024-07-16 12:22:07 -07:00
Linus Torvalds
d80f2996b8 asm-generic updates for 6.11 
Most of this is part of my ongoing work to clean up the system call
 tables. In this bit, all of the newer architectures are converted to
 use the machine readable syscall.tbl format instead in place of complex
 macros in include/uapi/asm-generic/unistd.h.
 
 This follows an earlier series that fixed various API mismatches
 and in turn is used as the base for planned simplifications.
 
 The other two patches are dead code removal and a warning fix.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVB1cACgkQYKtH/8kJ
 UicMqxAAnYKOxfjoMIhYYK6bl126wg/vIcDcjIR9cNWH21Nhn3qxn11ZXau3S7xv
 3l/HreEhyEQr4gC2a70IlXyHUadYOlrk+83OURrunWk1oKPmZlMKcfPVbtp8GL7x
 PUNXQfwM1XZLveKwufY24hoZdwKC+Y/5WLc1t0ReznJuAqgeO2rM9W5dnV5bAfCp
 he3F5hFcr196Dz3/GJjJIWrY+cbwfmZWsNtj1vFTL5/r/LuCu8HTkqhsGj8tE5BJ
 NGVEEXbp5eaVTCIGqJWhnuZcsnKN9kM51M7CtdwWf8OTckUVuJap5OsDVKQkWkGl
 bLPbd2jhDltph0sah51hAIvv4WdkThW76u9FRW7KR3fo7ra67eF7l5j7wc1lE2JB
 GwLJ1X56Bxe1GhvvNTlDmb7DrnlP/DMPuRv3Z6xyH6l8iZ2pMGlnAxuw6Bs1s6Y5
 WSs36ZpnS0ctgjfx37ZITsZSvbKFPpQFJP4siwS8aRNv/NFALNNdFyOCY5lNzspZ
 0dxwjn6/7UpHE4MKh6/hvCg2QwupXXBTRytibw+75/rOsR+EYlmtuONtyq2sLUHe
 ktJ5pg+8XuZm27+wLffuluzmY7sv2F8OU4cTYeM60Ynmc6pRzwUY6/VhG52S1/mU
 Ua4VgYIpzOtlLrYmz5QTWIZpdSFSVbIc/3pLriD6hn4Mvg+BwdA=
 =XOhL
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
 "Most of this is part of my ongoing work to clean up the system call
  tables. In this bit, all of the newer architectures are converted to
  use the machine readable syscall.tbl format instead in place of
  complex macros in include/uapi/asm-generic/unistd.h.

  This follows an earlier series that fixed various API mismatches and
  in turn is used as the base for planned simplifications.

  The other two patches are dead code removal and a warning fix"

* tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  vmlinux.lds.h: catch .bss..L* sections into BSS")
  fixmap: Remove unused set_fixmap_offset_io()
  riscv: convert to generic syscall table
  openrisc: convert to generic syscall table
  nios2: convert to generic syscall table
  loongarch: convert to generic syscall table
  hexagon: use new system call table
  csky: convert to generic syscall table
  arm64: rework compat syscall macros
  arm64: generate 64-bit syscall.tbl
  arm64: convert unistd_32.h to syscall.tbl format
  arc: convert to generic syscall table
  clone3: drop __ARCH_WANT_SYS_CLONE3 macro
  kbuild: add syscall table generation to scripts/Makefile.asm-headers
  kbuild: verify asm-generic header list
  loongarch: avoid generating extra header files
  um: don't generate asm/bpf_perf_event.h
  csky: drop asm/gpio.h wrapper
  syscalls: add generic scripts/syscall.tbl
 2024-07-16 12:09:03 -07:00
Linus Torvalds
a5db8e4544 soc: arm platform updates for 6.11 
The majority of the updates here are Dmitry Torokhov's cleanups
 for platform code in the pxa and tegra platforms, changing custom
 platform_data structures into DT-compatible software node declarations.
 
 The other updates are for the MAINTAINERS file, correcting some
 stale or missing entries.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVNvgACgkQYKtH/8kJ
 UiddAQ//QIfU7YJbB+nLLHURWDZsFqzmdwX9Shwb810TecwkYyeltbjkwYQw6/VD
 Pc1C5t08Brnjwgm9Z4jU8dKDeS4znMy1MzjyGoZqYLamNojhChXG4fonhGVYncg4
 m3ruXgXZ/xsmqfMloclCtOSB6DWjXk9tVyUDNymXWgATmlwVsZl6saXf5nEo11bu
 WKi6kHhfM1s/JKGBaScd/GnxmXpBco4T7ub8cBZ/6Kn5RS6OodSb1ZCiTTI3KHdT
 oLzQ+B+MjAF5jlWvrqFuKrosjHB0RiKa/GKlfwsM4ho91Rfm979wsykEacR+iOy6
 usbAdfV/AgKT0C6Hd471Kdtpt0mV5lcc4QdwQTAycslHI4CzjRmQW+yHWUJxxOEB
 ggEtzKimpVbInN4ygJTnA8dZIawZ/CdCZQ04hQtyEuZamx3MGYVPaNIowNq4CRlv
 r6NRgfvQVGeQfpJCOdUySwwxVXDsq+Q8dUvswf6qfDDRyHiAtNqnoNd/G4rsI9Uy
 ItsGaFHpaVi1ElAO7IyEb9JzQGRIwxryseET5cUyfhJEM5RFk4aBMYJVFtDgV4H5
 KldgfIWpUZyMlM6IxdWziBDvKyrToAXb9NSX7nlcP2879IztNIwW2V+7y4rdX7Mu
 fTjLZxkypLdJkKvdcXNwS4toZ+CvpzcjeEJlGcPcVc1JY/Ua3Ck=
 =/EgX
 -----END PGP SIGNATURE-----

Merge tag 'soc-arm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull arm SoC platform updates from Arnd Bergmann:
 "The majority of the updates here are Dmitry Torokhov's cleanups for
  platform code in the pxa and tegra platforms, changing custom
  platform_data structures into DT-compatible software node
  declarations.

  The other updates are for the MAINTAINERS file, correcting some stale
  or missing entries"

* tag 'soc-arm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: pxa: fix build breakage on PXA3xx
  ti: omap: MAINTAINERS: move Benoît Cousson to CREDITS
  amazon: MAINTAINERS: change to odd fixes and Tsahee Zidenberg to CREDITS
  MAINTAINERS: thead: add git tree
  ARM: spitz: Use software nodes for the ADS7846 touchscreen
  ARM: spitz: Use software nodes to describe LED GPIOs
  ARM: spitz: Use software nodes to describe MMC GPIOs
  ARM: spitz: Use software nodes to describe LCD GPIOs
  ARM: spitz: Use software nodes to describe audio GPIOs
  ARM: spitz: Use software nodes to describe SPI CS lines
  ARM: spitz: Simplify instantiating SPI controller
  ARM: pxa/gumstix: convert vbus gpio to use software nodes
  ARM: pxa: consolidate GPIO chip platform data
  ARM: spitz: fix GPIO assignment for backlight
  ARM: tegra: paz00: Use software nodes to describe GPIOs for WiFi rfkill
  MAINTAINERS: ARM: airoha: add entry to cover Airoha SoC
  bus: vexpress-config: Add missing MODULE_DESCRIPTION() macro
  arm64: layerscape: remove redundant EDAC_SUPPORT selection
  dt-bindings: arm: Remove obsolete RTSM DCSCB binding
  arm: vexpress: Remove obsolete RTSM DCSCB support
 2024-07-16 12:03:39 -07:00
Linus Torvalds
e3950967f6 soc: dt updates for 6.11 
The devicetree updates are fairly well spread out across platforms,
 with Qualcomm making up about a third of the total.
 
 There are three new SoCs in existing product families this:
 
  - NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
    instead of just two as well as a GPU and more high-speed I/O
    devices.
 
  - Qualcomm QCS8550 is a variant of SM8550 for IOT devices
 
  - Airoha EN7581 is a 10G-PON network chip and related to
    the MT7981 Wireless router chip from its parent Mediatek.
 
 In total there are 58 new machines, including four riscv
 boards and eight for 32-bit arm.
 
 The most exciting new addition is probably a pair of laptops
 based on the Qualcomm x1e80100 (Snapdragon X1 Elite) chip,
 the Asus Vivobook S15 and the Lenovo Yoga Slim7x.
 
 Other noteworthy new additions are:
 
  - A total of 20 Qualcomm based machines, mostly Android devices
    from Samsung, Motorola and LG, as well as a wireless router
    and some reference designs
 
  - Six NXP i.MX based machines, mostly industrial boards along
    with some reference designs
 
  - Mediatek sees some interesting Filogic based routers
    including the "OpenWRT One", a few new Chromebooks as
    well as single-board computers.
 
  - Four machines from Solidrun based on Marvell cn913x,
    replacing the older Armada 8000 based counterparts
 
  - The four Amlogic machines are all set top boxes or reference
    designs for them
 
  - The nine new Rockchips machines are mostly single-board
    computers including some interesting ones based on the
    rk3588 chip like the ROCK 5 ITX board and the CM3588
    with its four NVMe slots
 
  - The RISC-V boards are all single-board computers based on
    Starfive JH7110, Microchip MPFS and Allwinner D1, which all
    had similar boards already
 
 There are also a lot of updates to already supported machines,
 notably for the TI K3, Rockchips, Freescale and of course
 Qualcomm platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVTSYACgkQYKtH/8kJ
 UidZrQ/9GKrfiZ9xJ/7Vvh/jtF5uObsoVuEC2ZFNXY4q6x6KV8BxuHV6LVHgWVaS
 3+Mp5ER1N+h13cB8aDNQ9lq/TYfINQrAGFPMWK2Ytkg57klqeCblfSiKuQxIfdmG
 SH146R3NPe6lqEZ9yv8KWr1GS8kkkVFgzcOBD2BPwx77elazBvG4Ff5rd3Nizua2
 aAcrO2tKHMOJz4eUOJNvrDppwBZUARwPlScBx+QrJWUIDvjRafGvmwSp80FEQorz
 k258DeBzn3JiHUtvE5MLsaBC1WNghV5WTujEI+SLd5T0XohSr5Y8oisSnn/9fAn4
 CCji0eeeqG/KfIWzEGvs7AKmym1oW1OpdbLRN601YSNxLS7mLE5gEySjFXR3dYje
 IxbYzDV9A8qst/znk+uR6be8YB9r7r+aYi4IlE4lg9xWripTOPNuCx/5tdfa2Ge6
 +fBs4WBz+t0Xba19VjonaP+6HsEPqC2LP0/D44QMktG7QRrYbqILX66Mg/jgPccM
 f167D9WGcWUwoKH2nDZ+m1oXQj0UkSge40gBOFRtGfdCsV77TssmGeq0OeDDSA9K
 bIQgaDVwZuYXr9kyNoYIqziU0JA+mhALLiaAVaMLS8+VcNXRZKscv3fs+yFgCGFy
 aDkqWw6j2M3/O93+t4j4He/KNglquA81DBT8ZZPV1KJ4flTQIk0=
 =xGqj
 -----END PGP SIGNATURE-----

Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC dt updates from Arnd Bergmann:
 "The devicetree updates are fairly well spread out across platforms,
  with Qualcomm making up about a third of the total.

  There are three new SoCs in existing product families this:

   - NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
     instead of just two as well as a GPU and more high-speed I/O
     devices.

   - Qualcomm QCS8550 is a variant of SM8550 for IOT devices

   - Airoha EN7581 is a 10G-PON network chip and related to the MT7981
     Wireless router chip from its parent Mediatek.

  In total there are 58 new machines, including four riscv boards and
  eight for 32-bit arm.

  The most exciting new addition is probably a pair of laptops based on
  the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
  S15 and the Lenovo Yoga Slim7x.

  Other noteworthy new additions are:

   - A total of 20 Qualcomm based machines, mostly Android devices from
     Samsung, Motorola and LG, as well as a wireless router and some
     reference designs

   - Six NXP i.MX based machines, mostly industrial boards along with
     some reference designs

   - Mediatek sees some interesting Filogic based routers including the
     "OpenWRT One", a few new Chromebooks as well as single-board
     computers.

   - Four machines from Solidrun based on Marvell cn913x, replacing the
     older Armada 8000 based counterparts

   - The four Amlogic machines are all set top boxes or reference
     designs for them

   - The nine new Rockchips machines are mostly single-board computers
     including some interesting ones based on the rk3588 chip like the
     ROCK 5 ITX board and the CM3588 with its four NVMe slots

   - The RISC-V boards are all single-board computers based on Starfive
     JH7110, Microchip MPFS and Allwinner D1, which all had similar
     boards already

  There are also a lot of updates to already supported machines, notably
  for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"

* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
  arm64: dts: allwinner: h616: add crypto engine node
  riscv: dts: add clock generator for Sophgo SG2042 SoC
  arm64: dts: rockchip: Add Xunlong Orange Pi 3B
  dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
  arm64: dts: rockchip: Add Radxa ROCK 3B
  dt-bindings: arm: rockchip: Add Radxa ROCK 3B
  mailmap: Update Luca Weiss's email address
  ARM: dts: ixp4xx: nslu2: beeper uses PWM
  arm64: dts: rockchip: add ROCK 5 ITX board
  dt-bindings: arm: rockchip: Add ROCK 5 ITX board
  arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
  arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
  arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
  arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
  dt-bindings: arm: qcom: Add msm8916 based LG devices
  ARM: dts: qcom: msm8960: correct memory base
  arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
  dt-bindings: interconnect: Add Qualcomm IPQ9574 support
  arm64: dts: qcom: sm8150: Add video clock controller node
  arm64: dts: qcom: pm6150: Add vibrator
  ...
 2024-07-16 11:43:51 -07:00
Linus Torvalds
cc0f7c3f97 soc: driver updates for 6.11 
The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
 samsung, imx, zynq and amlogic platoforms are farily small maintenance
 changes, either addressing minor mistakes or enabling additional hardware.
 
 The qualcomm platform changes add a number of features and are larger
 than the other ones combined, introducing the use of linux/cleanup.h
 across several drivers, adding support for Snapdragon X1E and other
 SoCs in platform drivers, a new "protection domain mapper" driver, and a
 "shared memory bridge" driver.
 
 The cznic "turris omnia" router based on Marvell Armada gets a platform
 driver that talks to the board specific microcontroller.
 
 The reset and cache subsystems get a few minor updates to SoC specific
 drivers, while the ff-a, scmi and optee firmware drivers get some
 code refactoring and new features.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVTTUACgkQYKtH/8kJ
 UiegixAAqGfwUtwk2GGZJlEGjUjT4cqrwCTLhNlaNfgN/dZxjk1XBTKvtp2mVDi2
 lJN8TNqa0Csw8XZYPgHi0s1ppmwQl07Unpbc9tUeS4tAeIuputDe+ia0UtQx3Mkd
 GTAKJO6VzLeCnDxB4757OURZO9wYlPdZycQbnSKDyfBIapFuZwozmbAc7BuFGvBv
 2Zt5lca531EJuM5wg25f+F/8XSxZIqjMA6/PTGNCYig1bx5AM2tCWK2xN+BL+dxn
 YVLuRZT7lSgpwivg9OHzJ49g9WeJB7RArnSDg1Ac7sNfC8476UC17BAH4rF7QSTP
 q2GBP2VOdRJA9mJkavtLhE/1LPDJuYTM+nt1xq7jzG2MKN7yLjX0LMrMgKsk0pXZ
 T2qQh7+4MA9lwlpGEwDruMajTJahbMgiAUcSivLsr18LrifAnKVHBDTRmRwNiRX2
 T3/zk90kenJX1NOkc4SrdLd5iCyq0oSN+fukdh3UMgJLnAzaWOe5mKAMF7eefeog
 rMH276W8JwbbmIC4R2aQm6TL7IWBtaCaHuLqYOiTjooir31OgwW4Mztd7okU4v4I
 rOGhV0zJTSVXT+a4O2jOooWppS9xE45/F2DSigSvZjEiahZ0L4feaOrHui5PVVlW
 wmFmobCq6Y0Mjspdk64O1tbUWJ17CmRK1WDrUUk0VgmLy9gn6A8=
 =ChcR
 -----END PGP SIGNATURE-----

Merge tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
 "The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
  samsung, imx, zynq and amlogic platoforms are fairly small maintenance
  changes, either addressing minor mistakes or enabling additional
  hardware.

  The qualcomm platform changes add a number of features and are larger
  than the other ones combined, introducing the use of linux/cleanup.h
  across several drivers, adding support for Snapdragon X1E and other
  SoCs in platform drivers, a new "protection domain mapper" driver, and
  a "shared memory bridge" driver.

  The cznic "turris omnia" router based on Marvell Armada gets a
  platform driver that talks to the board specific microcontroller.

  The reset and cache subsystems get a few minor updates to SoC specific
  drivers, while the ff-a, scmi and optee firmware drivers get some code
  refactoring and new features"

* tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits)
  firmware: turris-mox-rwtm: Initialize completion before mailbox
  firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout()
  firmware: turris-mox-rwtm: Do not complete if there are no waiters
  MAINTAINERS: drop riscv list from cache controllers
  platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
  bus: sunxi-rsb: Constify struct regmap_bus
  soc: sunxi: sram: Constify struct regmap_config
  platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
  platform: cznic: turris-omnia-mcu: Depend on OF
  soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers
  arm64: stm32: enable scmi regulator for stm32
  firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
  soc: qcom: wcnss: simplify with cleanup.h
  soc: qcom: pdr: simplify with cleanup.h
  soc: qcom: ocmem: simplify with cleanup.h
  soc: qcom: mdt_loader: simplify with cleanup.h
  soc: qcom: llcc: simplify with cleanup.h
  firmware: qcom: tzmem: simplify returning pointer without cleanup
  soc: qcom: socinfo: Add PM6350 PMIC
  arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
  ...
 2024-07-16 11:35:27 -07:00
Linus Torvalds
99298eb615 m68k updates for v6.11 
- Fix bootup lock-ups on Warp1260, Atari TT, and MegaSTe,
   - Miscellaneous fixes and improvements,
   - Defconfig updates.
 -----BEGIN PGP SIGNATURE-----
 
 iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZpT3pBUcZ2VlcnRAbGlu
 dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XDvCAEA8kPudtM0BbhDyiMPceC0LCp5aR78
 yrI267w6NotilewBAItRhiL3YMmjrU8DiNOVnKu5aXR94hk6Y7yv55eOeEAI
 =Mynu
 -----END PGP SIGNATURE-----

Merge tag 'm68k-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull m68k updates from Geert Uytterhoeven:

 - Fix bootup lock-ups on Warp1260, Atari TT, and MegaSTe

 - Miscellaneous fixes and improvements

 - defconfig updates

* tag 'm68k-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: cmpxchg: Fix return value for default case in __arch_xchg()
  m68k: defconfig: Update defconfigs for v6.10-rc1
  m68k: atari: Fix TT bootup freeze / unexpected (SCU) interrupt messages
  zorro: Use str_plural() in amiga_zorro_probe()
  m68k: emu: Add missing MODULE_DESCRIPTION() macros
  m68k: amiga: Turn off Warp1260 interrupts during boot
 2024-07-16 11:30:32 -07:00
Linus Torvalds
408323581b - Add support for running the kernel in a SEV-SNP guest, over a Secure 
VM Service Module (SVSM).
 
    When running over a SVSM, different services can run at different
    protection levels, apart from the guest OS but still within the
    secure SNP environment.  They can provide services to the guest, like
    a vTPM, for example.
 
    This series adds the required facilities to interface with such a SVSM
    module.
 
  - The usual fixlets, refactoring and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmaWQuoACgkQEsHwGGHe
 VUrmEw/+KqM5DK5cfpue3gn0RfH6OYUoFxOdYhGkG53qUMc3c3ka5zPVqLoHPkzp
 WPXha0Z5pVdrcD9mKtVUW9RIuLjInCM/mnoNc3tIUL+09xxemAjyG1+O+4kodiU7
 sZ5+HuKUM2ihoC4Rrm+ApRrZfH4+WcgQNvFky77iObWVBo4yIscS7Pet/MYFvuuz
 zNaGp2SGGExDeoX/pMQNI3S9FKYD26HR17AUI3DHpS0teUl2npVi4xDjFVYZh0dQ
 yAhTKbSX3Q6ekDDkvAQUbxvWTJw9qoIsvLO9dvZdx6SSWmzF9IbuECpQKGQwYcp+
 pVtcHb+3MwfB+nh5/fHyssRTOZp1UuI5GcmLHIQhmhQwCqPgzDH6te4Ud1ovkxOu
 3GoBre7KydnQIyv12I+56/ZxyPbjHWmn8Fg106nAwGTdGbBJhfcVYfPmPvwpI4ib
 nXpjypvM8FkLzLAzDK6GE9QiXqJJlxOn7t66JiH/FkXR4gnY3eI8JLMfnm5blAb+
 97LC7oyeqtstWth9/4tpCILgPR2tirrMQGjUXttgt+2VMzqnEamnFozsKvR95xok
 4j6ulKglZjdpn0ixHb2vAzAcOJvD7NP147jtCmXH7M6/f9H1Lih3MKdxX98MVhWB
 wSp16udXHzu5lF45J0BJG8uejSgBI2y51jc92HLX7kRULOGyaEo=
 =u15r
 -----END PGP SIGNATURE-----

Merge tag 'x86_sev_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 SEV updates from Borislav Petkov:

 - Add support for running the kernel in a SEV-SNP guest, over a Secure
   VM Service Module (SVSM).

   When running over a SVSM, different services can run at different
   protection levels, apart from the guest OS but still within the
   secure SNP environment. They can provide services to the guest, like
   a vTPM, for example.

   This series adds the required facilities to interface with such a
   SVSM module.

 - The usual fixlets, refactoring and cleanups

[ And as always: "SEV" is AMD's "Secure Encrypted Virtualization".

  I can't be the only one who gets all the newer x86 TLA's confused,
  can I?
              - Linus ]

* tag 'x86_sev_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation/ABI/configfs-tsm: Fix an unexpected indentation silly
  x86/sev: Do RMP memory coverage check after max_pfn has been set
  x86/sev: Move SEV compilation units
  virt: sev-guest: Mark driver struct with __refdata to prevent section mismatch
  x86/sev: Allow non-VMPL0 execution when an SVSM is present
  x86/sev: Extend the config-fs attestation support for an SVSM
  x86/sev: Take advantage of configfs visibility support in TSM
  fs/configfs: Add a callback to determine attribute visibility
  sev-guest: configfs-tsm: Allow the privlevel_floor attribute to be updated
  virt: sev-guest: Choose the VMPCK key based on executing VMPL
  x86/sev: Provide guest VMPL level to userspace
  x86/sev: Provide SVSM discovery support
  x86/sev: Use the SVSM to create a vCPU when not in VMPL0
  x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0
  x86/sev: Use kernel provided SVSM Calling Areas
  x86/sev: Check for the presence of an SVSM in the SNP secrets page
  x86/irqflags: Provide native versions of the local_irq_save()/restore()
 2024-07-16 11:12:25 -07:00
Linus Torvalds
b84b338190 - Enable Sub-NUMA clustering to work with resource control on Intel by 
teaching resctrl to handle scopes due to the clustering which
    partitions the L3 cache into sets. Modify and extend the subsystem to
    handle such scopes properly
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmaWGPcACgkQEsHwGGHe
 VUrLtQ/9GnY6EZDXQf6gF50FuasOrjaJw3bzSN6N0Hy28BEgG0fFrZzAKYRUvJXl
 s16JkgQrQB3JaoT4bwcaSvMvBTtc+1cDuxMYI3C7jtBkjGFRwOgsCp/Hr2xujaKK
 IfOJNmDLx2YRuxFyfi1FK4b1YqZ1gtg5FcmmaelBCu/rkQcBC9S7VtqGqCjwmhxy
 l5WVDzMdXB++cxEJz1fBCyjdPgAwhEmNm0fnxGc0je1EvJUczd2o8Us3ND8Sw5x1
 +5JL4PjwSMlFa71yw+rTzUs9u01SAI3IxvU6sPhmxhr3O4is4rGusyUldiz1598r
 U+bYWivGn1ksVPifo0c6UUtbpaO9KLAnxsiRct7FKZdBfaqXi13twi1918aVyECJ
 8pW0R8c/W3kQYMPOlhwBIzJp31rPzAxu70k9DT0cShAzKk/EbIWZAuZGqMz9bhfS
 pcfCdD+36C/jN57KIhzo3GamzgHee40MQMLBKjFe1etZFit2EjyUK/jZhdYZWckj
 +mOyWLngLVzF2mIkFrmw4VDRHsSqZlBGSHwHyiC+J+lL+nO9N9xQrtxm4z8TimLY
 QquDSTYdqi2dGYVpN4vIOktn40A43UxirKC1X3fVqQRz71LcYGe28tMlQ99kUUJR
 H8PGajlxfSB1CWNZpgaHGTMzU09ojHvJYmXy2p1HJf4fcBiXOV4=
 =LITm
 -----END PGP SIGNATURE-----

Merge tag 'x86_cache_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 resource control updates from Borislav Petkov:

 - Enable Sub-NUMA clustering to work with resource control on Intel by
   teaching resctrl to handle scopes due to the clustering which
   partitions the L3 cache into sets. Modify and extend the subsystem to
   handle such scopes properly

* tag 'x86_cache_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Update documentation with Sub-NUMA cluster changes
  x86/resctrl: Detect Sub-NUMA Cluster (SNC) mode
  x86/resctrl: Enable shared RMID mode on Sub-NUMA Cluster (SNC) systems
  x86/resctrl: Make __mon_event_count() handle sum domains
  x86/resctrl: Fill out rmid_read structure for smp_call*() to read a counter
  x86/resctrl: Handle removing directories in Sub-NUMA Cluster (SNC) mode
  x86/resctrl: Create Sub-NUMA Cluster (SNC) monitor files
  x86/resctrl: Allocate a new field in union mon_data_bits
  x86/resctrl: Refactor mkdir_mondata_subdir() with a helper function
  x86/resctrl: Initialize on-stack struct rmid_read instances
  x86/resctrl: Add a new field to struct rmid_read for summation of domains
  x86/resctrl: Prepare for new Sub-NUMA Cluster (SNC) monitor files
  x86/resctrl: Block use of mba_MBps mount option on Sub-NUMA Cluster (SNC) systems
  x86/resctrl: Introduce snc_nodes_per_l3_cache
  x86/resctrl: Add node-scope to the options for feature scope
  x86/resctrl: Split the rdt_domain and rdt_hw_domain structures
  x86/resctrl: Prepare for different scope for control/monitor operations
  x86/resctrl: Prepare to split rdt_domain structure
  x86/resctrl: Prepare for new domain scope
 2024-07-16 10:53:54 -07:00
Linus Torvalds
98896d8795 - Unrelated x86/cc changes queued here to avoid ugly cross-merges and 
conflicts:
 
    - Carve out CPU hotplug function declarations into a separate header
      with the goal to be able to use the lockdep assertions in a more
      flexible manner
 
    - As a result, refactor cacheinfo code after carving out a function
      to return the cache ID associated with a given cache level
 
    -  Cleanups
 
 - Add support to be able to kexec TDX guests. For that
 
    - Expand ACPI MADT CPU offlining support
 
    - Add machinery to prepare CoCo guests memory before kexec-ing into a new
      kernel
 
    - Cleanup, readjust and massage related code
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmaVCYoACgkQEsHwGGHe
 VUoi6g//Up/4vMzcjqzrndXfl0aP+NpK4zNud+ZPP4Qza2yPhKydniMvkWVQ8DTx
 jQaGk/tJDeFG6ofOzGkmBGyuZzuO4D7E0XFyXZZeVgSvdk2Af5vaWu1D3e4i4MiM
 Ox4H8NtWnC4MozP0hos4qB0vtYaBWVJkNvIXDVF6162zLwEmbuyrpFe3glscwIxv
 hMZR/C47RHcEeOb7yA4m/gJ+AqMe9OKradoNJkkfDpnYr6CYsbmpY09or2WYuvoI
 0gevkIe6Q9HMcq3CQl6/pR8IgbA5VmGi7iCiE1ihgTPwR3AaU8llzBqYdSgezFrk
 68A7oGeUZQeifQgjwkreZclMtsGEeGWVOB0Bh3Jgr6uaWGFXtpydi/hc73wbTz+F
 IazKQcKQYjaPW/9UG+0+cFTQlCgQ+WxwqAsN1uqzL6gMgmC9B+TM//xzk5nVxpOd
 ouf8T85tyceIPCKepGE/bWEHYYCjfbqBMyQT6RHmxUKbb1/PIsbzN26cenkZmPXT
 cpwurWVG7mRQJRqTrsS+D+opP1h/jOdkpwGlBfl1s0sX6RZuMFBk+7TlMMs61Cyo
 PWtrLV7Dr369cuXE72wIgfBAao2AS8kFshc7Atokq7/XfL9cCWHeqIcu7yvParP5
 WY43YQv8XPGI7ZnPqULByTY0Wxg8TFk8whamx97kEp8uy2HmbQU=
 =k+T+
 -----END PGP SIGNATURE-----

Merge tag 'x86_cc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 confidential computing updates from Borislav Petkov:
 "Unrelated x86/cc changes queued here to avoid ugly cross-merges and
  conflicts:

   - Carve out CPU hotplug function declarations into a separate header
     with the goal to be able to use the lockdep assertions in a more
     flexible manner

   - As a result, refactor cacheinfo code after carving out a function
     to return the cache ID associated with a given cache level

   - Cleanups

  Add support to be able to kexec TDX guests:

   - Expand ACPI MADT CPU offlining support

   - Add machinery to prepare CoCo guests memory before kexec-ing into a
     new kernel

   - Cleanup, readjust and massage related code"

* tag 'x86_cc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  ACPI: tables: Print MULTIPROC_WAKEUP when MADT is parsed
  x86/acpi: Add support for CPU offlining for ACPI MADT wakeup method
  x86/mm: Introduce kernel_ident_mapping_free()
  x86/smp: Add smp_ops.stop_this_cpu() callback
  x86/acpi: Do not attempt to bring up secondary CPUs in the kexec case
  x86/acpi: Rename fields in the acpi_madt_multiproc_wakeup structure
  x86/mm: Do not zap page table entries mapping unaccepted memory table during kdump
  x86/mm: Make e820__end_ram_pfn() cover E820_TYPE_ACPI ranges
  x86/tdx: Convert shared memory back to private on kexec
  x86/mm: Add callbacks to prepare encrypted memory for kexec
  x86/tdx: Account shared memory
  x86/mm: Return correct level from lookup_address() if pte is none
  x86/mm: Make x86_platform.guest.enc_status_change_*() return an error
  x86/kexec: Keep CR4.MCE set during kexec for TDX guest
  x86/relocate_kernel: Use named labels for less confusion
  cpu/hotplug, x86/acpi: Disable CPU offlining for ACPI MADT wakeup
  cpu/hotplug: Add support for declaring CPU offlining not supported
  x86/apic: Mark acpi_mp_wake_* variables as __ro_after_init
  x86/acpi: Extract ACPI MADT wakeup code into a separate file
  x86/kexec: Remove spurious unconditional JMP from from identity_mapped()
  ...
 2024-07-15 19:36:01 -07:00
Linus Torvalds
e23dd95cfd spi: Updates for v6.11 
There's some quite exciting core work in this release, we've got the
 beginnings of support for hardware initiated transfers which is itself
 independently useful for optimising fast paths in existing drivers.
 
 We also have a rework of the DMA mapping which allows finer grained
 decisions about DMA mapping messages and also helps remove some bodges
 that we'd had.
 
 Otherwise it's a fairly quiet release, a few new drivers and features
 for existing drivers, together with various cleanups and DT binding
 conversions.
 
 One regmap SPI fix made it's way in here too which I should probably
 have sent as a regmap fix instead.
 
  - Support for pre-optimising messages, reducing the overhead for
    messages that are repeatedly used (eg, reading the interrupt status
    from a device).  This will also be used for hardware initiated
    transfers in future.
  - A reworking of how DMA mapping is done, introducing a new helper and
    allowing the DMA mapping decision to be done per transfer instead of
    per message.
  - Support for Atmel SAMA7D64, Freescale LX2160A DSPI and WCH CH341A.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmaVLH0ACgkQJNaLcl1U
 h9DhHQf+KD1gVf0dF9N7Y4gf+fjFQpbf7hxpB24lpJ952/9Ke1hsM19JZDqNaTVa
 ITXIyQLr4uCtPXZ6jOd03td/6TGs9sG3VTLcRrYCG44CvhWpDgAg9Nc3KbNj95Zf
 oPWMLEG2Y2ZjGzIrbqciJ5IRF/gT4rnc2PwytmkrPYwQn6CLUCw7BM3QFFqMnyPb
 U4UA/EmLuOqtlu4z+hdL97JX/XWQfWNLzXfIlIrfJserRBexwmefN7Y2+5fica02
 OBTDyMsg82yZtqASvbsTVn4di577oCYbMnpy+0f+a74h2DDMDfspury8CbrST+Cj
 Jr7/082RuYUlUUyrR9N98EhJ9p1K+w==
 =snrv
 -----END PGP SIGNATURE-----

Merge tag 'spi-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "There's some quite exciting core work in this release, we've got the
  beginnings of support for hardware initiated transfers which is itself
  independently useful for optimising fast paths in existing drivers.

  We also have a rework of the DMA mapping which allows finer grained
  decisions about DMA mapping messages and also helps remove some bodges
  that we'd had.

  Otherwise it's a fairly quiet release, a few new drivers and features
  for existing drivers, together with various cleanups and DT binding
  conversions.

  One regmap SPI fix made it's way in here too which I should probably
  have sent as a regmap fix instead.

  Summary:

   - Support for pre-optimising messages, reducing the overhead for
     messages that are repeatedly used (eg, reading the interrupt status
     from a device). This will also be used for hardware initiated
     transfers in future.

   - A reworking of how DMA mapping is done, introducing a new helper
     and allowing the DMA mapping decision to be done per transfer
     instead of per message.

   - Support for Atmel SAMA7D64, Freescale LX2160A DSPI and WCH CH341A"

* tag 'spi-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (72 commits)
  spi: dt-bindings: at91: Add sama7d65 compatible string
  spi: add ch341a usb2spi driver
  spi: dt-bindings: fsl-dspi: add compatible string 'fsl,lx2160a-dspi'
  spi: dt-bindings: fsl-dspi: add dmas and dma-names properties
  spi: spi: Remove unnecessary ‘0’ values from status
  spi: spi: Remove unnecessary ‘0’ values from rc
  spi: xcomm: fix coding style
  spi: xcomm: remove i2c_set_clientdata()
  spi: xcomm: make use of devm_spi_alloc_host()
  spi: xcomm: add gpiochip support
  spi: dt-bindings: snps,dw-apb-ssi.yaml: update compatible property
  spi: dt-bindings: fsl-dspi: Convert to yaml format
  spi: fsl-dspi: use common proptery 'spi-cs-setup(hold)-delay-ns'
  spi: axi-spi-engine: remove platform_set_drvdata()
  spi: spi-fsl-lpspi: Pass pm_ptr()
  spi: spi-imx: Pass pm_ptr()
  spi: spi-fsl-lpspi: Switch to SYSTEM_SLEEP_PM_OPS()
  spi: spi-imx: Switch to RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
  spi: add EXPORT_SYMBOL_GPL(devm_spi_optimize_message)
  spi: add devm_spi_optimize_message() helper
  ...
 2024-07-15 18:03:43 -07:00
Linus Torvalds
584aeccc0b regulator: Updates for v6.11 
This s a very quiet release for the regulator API, we have a few new
 devices (most of which are just ID updates) and one new fairly
 specialist core feature for use in interrupt context.
 
  - An API allowing lockless enable/disable for regulators acquired in
    exclusive mode, for use in interrupt contexts.
  - A rewrite of the MedaTek DVFSRC regulator driver which apparently
    never worked.
  - Support for Mediaktek MT6312, Qualcomm QCA6390 and WCN7850, Renesas
    RZ/G2L USB VBUS regulator and ST Microelectronics STM32MP13.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmaVJv4ACgkQJNaLcl1U
 h9DkzQf9GVcF09+cL00DX4MYmLtbehB/5b5ucdNa5XpBK03oYTFb6epx2NpAM5HO
 emYugPdAzyicdsU8pyh7HTUypE/s0aAYIv6jtaBiNv6jVxdyANsFP/eulzdEyIyA
 mm6oWPDHrNBj772AMC2gDraEEK07cC8ETD7cUMxkdop7qH9sclJugKPIFSV12SvL
 QxmyNfqtilOyvR/ncihV2Aln1+31bDXzdEeCALCEvmfUfuYs7HfzkwC0hpnBZEf8
 v3SE23XGT9n8IyPaRjymhTe4gvh7+3wslRkAiSfgye5OGUFzgfO9Cpwv9mWo8TbV
 fJQw2yNZ5Go/F2sqzHu22DrR/z5QoA==
 =yC/L
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This s a very quiet release for the regulator API, we have a few new
  devices (most of which are just ID updates) and one new fairly
  specialist core feature for use in interrupt context.

   - An API allowing lockless enable/disable for regulators acquired in
     exclusive mode, for use in interrupt contexts

   - A rewrite of the MedaTek DVFSRC regulator driver which apparently
     never worked

   - Support for Mediaktek MT6312, Qualcomm QCA6390 and WCN7850, Renesas
     RZ/G2L USB VBUS regulator and ST Microelectronics STM32MP13"

* tag 'regulator-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (26 commits)
  regulator: dt-bindings: pca9450: Make interrupt optional
  regulator: pca9450: Make IRQ optional
  dt-bindings: regulator: sprd,sc2731-regulator: convert to YAML
  regulator: max77857: Constify struct regmap_config
  regulator: da9121: Constify struct regmap_config
  dt-bindings: regulator: ti,tps65132: document VIN supply
  dt-bindings: mfd: twl: Fix example
  regulator: Add Renesas RZ/G2L USB VBUS regulator driver
  regulator: core: Add helper for allow HW access to enable/disable regulator
  regulator: Add bindings for MediaTek DVFSRC Regulators
  regulator: Add refactored mtk-dvfsrc-regulator driver
  regulator: Remove mtk-dvfsrc-regulator.c
  regulator: userspace-consumer: quiet device deferral
  regulator: dt-bindings: mt6315: Document MT6319 PMIC
  regulator: add missing MODULE_DESCRIPTION() macro
  dt-bindings: regulator: twl-regulator: convert to yaml
  regulator: dt-bindings: describe the PMU module of the WCN7850 package
  regulator: dt-bindings: describe the PMU module of the QCA6390 package
  regulator: dt-bindings: rtq2208: Add specified fixed LDO VOUT property
  regulator: rtq2208: Add fixed LDO VOUT property and check that matches the constraints
  ...
 2024-07-15 17:59:12 -07:00
Linus Torvalds
25617a5c45 regmap: Updates for v6.11 
There's one new feature here, a regmap_multi_reg_read() matching the
 existing write function which has some IIO users coming.  This allows
 atomic reads from multiple registers without the need to wrap a higher
 level lock in the client driver just for regmap (which already has locks
 anyway).  We also have one fix for the KUnit tests, and a bunch of
 cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmaVJRsACgkQJNaLcl1U
 h9CQcAf+PhHwUoxBextaJzy2HQe9CFV71/I4GEj0MTrtpqKDhmO8AQnsI4dKXr/9
 hZPUPR7+6qw7N12NdZQcT6hIX9CnhdiaNALo4ANvG5KlxFljhFbv2sBg1QAgb+Ks
 2gLapB4HY0jso+6urNEN5rvucFpf4Mxlz5ilrk3kuuJaC/xf6/QXoU5/9PjPyD5s
 ZuCBMg5G0BIIdwc9SFGJPv1UUJ0H6Aj/1ZQNo/JVtIj8uGt8TuvnUrmOxdnHRN1U
 b5AMjLnSYMtwRg7Nd/DCINmwPN+I0X79gNE4SG1LAOlQIChhW+47HuGWyCM40jGO
 p4X8o/zID9hw5q3y6CpwYvrJ5GRZbA==
 =ETId
 -----END PGP SIGNATURE-----

Merge tag 'regmap-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "There's one new feature here, a regmap_multi_reg_read() matching the
  existing write function which has some IIO users coming.

  This allows atomic reads from multiple registers without the need to
  wrap a higher level lock in the client driver just for regmap (which
  already has locks anyway).

  We also have one fix for the KUnit tests, and a bunch of cleanups"

* tag 'regmap-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: kunit: Add test cases for regmap_multi_reg_(read,write}()
  regmap: Implement regmap_multi_reg_read()
  regmap-irq: handle const struct regmap_irq_sub_irq_map
  const_structs.checkpatch: add regmap structs
  regmap: add missing MODULE_DESCRIPTION() macros
  regmap-i2c: add missing MODULE_DESCRIPTION() macro
  regmap: kunit: Use array_size() and sizeof(*ptr) consistently
  regmap: maple: Switch to use kmemdup_array()
  regmap: cache: Switch to use kmemdup_array()
  regmap: cache: Use correct type of the rb_for_each() parameter
  regmap: Switch to use kmemdup_array()
  regmap: kunit: add missing MODULE_DESCRIPTION()
  regmap: kunit: Fix memory leaks in gen_regmap() and gen_raw_regmap()
 2024-07-15 17:56:11 -07:00
Linus Torvalds
b3c0eccb48 gpio updates for v6.11-rc1 
GPIOLIB core:
 - rework kfifo handling rework in the character device code
 - improve the labeling of GPIOs requested as interrupts and show more info
   on interrupt-only GPIOs in debugfs
 - remove unused APIs
 - unexport interfaces that are only used from the core GPIO code
 - drop the return value from gpiochip_set_desc_names() as it cannot fail
 - move a string array definition out of a header and into a specific
   compilation unit
 - convert the last user of gpiochip_get_desc() other than GPIO core to using
   a safer alternative
 - use array_index_nospec() where applicable
 
 New drivers:
 - add a "virtual GPIO consumer" module that allows requesting GPIOs from actual
   hardware and driving tests of the in-kernel GPIO API from user-space over
   debugfs
 - add a GPIO-based "sloppy" logic analyzer module useful for "first glance"
   debugging on remote boards
 
 Driver improvements:
 - add support for a new model to gpio-pca953x
 - lock GPIOs as interrupts in gpio-sim when the lines are requested as irqs
   via the simulator domain + some other minor improvements
 - improve error reporting in gpio-syscon
 - convert gpio-ath79 to using dynamic GPIO base and range
 - use pcibios_err_to_errno() for converting PCIBIOS error codes to errno
   vaues in gpio-amd8111 and gpio-rdc321x
 - allow building gpio-brcmstb for the BCM2835 architecture
 
 DT bindings:
 - convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
 - document new properties for aspeed,gpio, fsl,qoriq-gpio and gpio-vf610
 - document new compatibles for pca953x and fsl,qoriq-gpio
 
 Documentation:
 - document stricter behavior of the GPIO character device uAPI with regards to
   reconfiguring requested line without direction set
 - clarify the effect of the active-low flag on line values and edges
 - remove documentation for the legacy GPIO API in order to stop tempting
   people to use it
 - document the preference for using pread() for reading edge events in the
   sysfs API
 
 Other:
 - add an extended initializer to the interrupt simulator allowing to specify
   a number of callbacks callers can use to be notified about irqs being
   requested and released
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmaU3n4ACgkQEacuoBRx
 13LnYxAAgIfV2MQxdlB8+I3+PrObiom9uykNpoj8Ho3FiGroJEmSi2Vg9NOP5j8n
 7THjBDFqKk0USMdzGgWDe+u0oCpql8ONLd+lxPiKzRxkebMVzlumeNzWNEE3wqxO
 MdV3AOs9DLM1a4MAuv9E8PgooBVR8Cyqs3tc3wwpZRKoSZBIzwrjFL3tO1P8Dezv
 9xoPqIiMJRBZr8jifU/ZRdLG3gYKqgQH1Mha7bm94ebUwA6q/hxtGYAtc2a3Q+dF
 6lPrPONJBN6/YwvmoDddm2ppoiyWN7QdX9DQjJvKBcNRTZSE1EAggdh8kNnCoa1d
 +PeClIAJLl8ZSkdMS8yvMZIpduK4gTl7yEBMkER1d0JoJLkTowqKsvONgU12Npr2
 3rwbpACt/kVt5v0lRwaafj5vnD3NgiiVCeuZZz99ICbrXqe6rYszMIemKDYWWlTn
 kEFrTM5ql+dwAfvp8Y9JZf4oOgInHbF3LBKM34PKMW9D0a4aQC/HTfmtHobeNHzn
 FmY9ysHjMG6fvuwnkpojW6N3/LLwt+TX8jik9x0O42AE7qXn6a8U2g6RUg6rJOdd
 mUiIX3+rn+AaI6eKPvUNp2h391jH1K3hBCAca4cNAIKpqPuE/A/B5RyZZnL5Q7HQ
 Iz2G3hSlTBVPf7QWMkBUfMzQMwmvqfoKsZljC5y7YgafJc5cf4k=
 =kK88
 -----END PGP SIGNATURE-----

Merge tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "The majority of added lines are two new modules: the GPIO virtual
  consumer module that improves our ability to add automated tests for
  the kernel API and the "sloppy" logic analyzer module that uses the
  GPIO API to implement a coarse-grained debugging tool for useful for
  remote development.

  Other than that we have the usual assortment of various driver
  extensions, improvements to the core GPIO code, DT-bindings and other
  documentation updates as well as an extension to the interrupt
  simulator:

  GPIOLIB core:
   - rework kfifo handling rework in the character device code
   - improve the labeling of GPIOs requested as interrupts and show more
     info on interrupt-only GPIOs in debugfs
   - remove unused APIs
   - unexport interfaces that are only used from the core GPIO code
   - drop the return value from gpiochip_set_desc_names() as it cannot
     fail
   - move a string array definition out of a header and into a specific
     compilation unit
   - convert the last user of gpiochip_get_desc() other than GPIO core
     to using a safer alternative
   - use array_index_nospec() where applicable

  New drivers:
   - add a "virtual GPIO consumer" module that allows requesting GPIOs
     from actual hardware and driving tests of the in-kernel GPIO API
     from user-space over debugfs
   - add a GPIO-based "sloppy" logic analyzer module useful for "first
     glance" debugging on remote boards

  Driver improvements:
   - add support for a new model to gpio-pca953x
   - lock GPIOs as interrupts in gpio-sim when the lines are requested
     as irqs via the simulator domain + some other minor improvements
   - improve error reporting in gpio-syscon
   - convert gpio-ath79 to using dynamic GPIO base and range
   - use pcibios_err_to_errno() for converting PCIBIOS error codes to
     errno vaues in gpio-amd8111 and gpio-rdc321x
   - allow building gpio-brcmstb for the BCM2835 architecture

  DT bindings:
   - convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
   - document new properties for aspeed,gpio, fsl,qoriq-gpio and
     gpio-vf610
   - document new compatibles for pca953x and fsl,qoriq-gpio

  Documentation:
   - document stricter behavior of the GPIO character device uAPI with
     regards to reconfiguring requested line without direction set
   - clarify the effect of the active-low flag on line values and edges
   - remove documentation for the legacy GPIO API in order to stop
     tempting people to use it
   - document the preference for using pread() for reading edge events
     in the sysfs API

  Other:
   - add an extended initializer to the interrupt simulator allowing to
     specify a number of callbacks callers can use to be notified about
     irqs being requested and released"

* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
  gpio: mc33880: Convert comma to semicolon
  gpio: virtuser: actually use the "trimmed" local variable
  dt-bindings: gpio: convert Atmel GPIO to json-schema
  gpio: virtuser: new virtual testing driver for the GPIO API
  dt-bindings: gpio: vf610: Allow gpio-line-names to be set
  gpio: sim: lock GPIOs as interrupts when they are requested
  genirq/irq_sim: add an extended irq_sim initializer
  dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
  gpiolib: unexport gpiochip_get_desc()
  gpio: add sloppy logic analyzer using polling
  Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
  Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
  dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
  gpio: ath79: convert to dynamic GPIO base allocation
  pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
  gpiolib: put gpio_suffixes in a single compilation unit
  Documentation: gpio: Clarify effect of active low flag on line edges
  Documentation: gpio: Clarify effect of active low flag on line values
  gpiolib: Remove data-less gpiochip_add() function
  gpio: sim: use devm_mutex_init()
  ...
 2024-07-15 17:53:24 -07:00
Linus Torvalds
3f32ab146c MMC host: 
- Convert from using tasklet to the BH workqueue
  - dw_mmc-bluefield: Add support for eMMC HW reset
  - mmc_spi: Allow spi controllers incapable of lower than 400kHz
  - sdhci: Rework code to eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
  - sdhci-brcmstb: Add support for the BCM2712 variant
  - sdhci-esdhc-imx: Disable card-detect as system wakeup on S32G platforms
  - sdhci-msm: Add support for the SDX75 variant
  - sdhci-of-dwcmshc: Enable CQE support for some Rockchip variants
  - sdhci-of-esdhc: Convert DT-bindings to yaml
  - sdhci-sprd: Convert DT-bindings to yaml
 
 MEMSTICK:
  - rtsx_pci_ms: Remove the unused Realtek PCI memstick driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmaU/CMXHHVsZi5oYW5z
 c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnXrxAA0qSVIuFN/BwEGKMke0BTmzRS
 KX4qFLqi+IfOyKfFqD0+trE2LJ2oh7CnfV/FSmW8+45rlsaoTVVRZPyrllYuwDC0
 OC3PeWBpzgYvmlilqHxsgl9McWG1F4mItgBvo0MxQFy26pwFiiQY3dBHjVchVwoZ
 VUq83rZr+cCgkriMrT31k2K0wwODTVEDxdKbmSwBSbYozPLyJkFediP64KH4sTF2
 gDe1mM++ZQgn6IC+sDpia6SH0WFnZKuUZlf08WU4l2TjgcNVAeIxsllh6nYZSgj8
 +nxEuICXyO8qYleCRBWb9s5EgNUl1P0dZmfDviHs+4ORbrie+4lngoDdqVraXz4g
 uy2QFYjZqfptmt4rJpUwtp2HbbX5eslV6rfS1uSkoYzcsTjQNv74Fgniek1qSXGh
 9aF7U1lliwWs0W/Aquom3vw+6edFrTjJ3TC/la5dZwkx4qRndAVFpFiyvxKCp5yZ
 FtpjUn7s80CAhxVTCVgdl4jCRgwZzG0j+t5/YrSwEw1h8vWYY/WwioyFDjoxkY+N
 gv63vr+CfzKCcCyWN3ROaYnSVn9GDQkwaX2zJJTi+7ozRj6t09/Jp+Yi5GuXpn3/
 Zktk35dSxCIF/DL8C1qwV1WWkOLQCLY7JGSWF41VDMkHMcw4+Xkp5YeynuktFEVt
 33AfOn/ul139Xd1MrXg=
 =0Oa4
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC host:
   - Convert from using tasklet to the BH workqueue
   - dw_mmc-bluefield: Add support for eMMC HW reset
   - mmc_spi: Allow spi controllers incapable of lower than 400kHz
   - sdhci: Rework code to eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
   - sdhci-brcmstb: Add support for the BCM2712 variant
   - sdhci-esdhc-imx: Disable card-detect as system wakeup on S32G platforms
   - sdhci-msm: Add support for the SDX75 variant
   - sdhci-of-dwcmshc: Enable CQE support for some Rockchip variants
   - sdhci-of-esdhc: Convert DT-bindings to yaml
   - sdhci-sprd: Convert DT-bindings to yaml

  MEMSTICK:
   - rtsx_pci_ms: Remove the unused Realtek PCI memstick driver"

* tag 'mmc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (26 commits)
  MAINTAINERS: add 's32@nxp.com' as relevant mailing list for 'sdhci-esdhc-imx' driver
  mmc: sdhci-esdhc-imx: obtain the 'per' clock rate after its enablement
  mmc: sdhci-esdhc-imx: disable card detect wake for S32G based platforms
  dt-bindings: mmc: sdhci-sprd: convert to YAML
  mmc: davinci_mmc: report all possible bus widths
  mmc: dw_mmc-bluefield: Add support for eMMC HW reset
  mmc: dw_mmc: Add support for platform specific eMMC HW reset
  mmc: sdhci_am654: Constify struct regmap_config
  mmc: Convert from tasklet to BH workqueue
  mmc: sdhi: Convert from tasklet to BH workqueue
  mmc: mmc_spi: allow for spi controllers incapable of getting as low as 400k
  memstick: rtsx_pci_ms: Remove Realtek PCI memstick driver
  MAINTAINERS: drop entry for VIA SD/MMC controller
  mmc: tmio: Remove obsolete .set_pwr() callback()
  mfd: tmio: Remove obsolete .set_clk_div() callback
  mmc: sdhci-brcmstb: Add ARCH_BCM2835 option
  mmc: sdhci: Eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
  dt-bindings: mmc: Convert fsl-esdhc.txt to yaml
  dt-bindings: mmc: mmc-spi-slot: Change voltage-ranges to uint32-matrix
  mmc: add missing MODULE_DESCRIPTION() macros
  ...
 2024-07-15 17:48:12 -07:00
Linus Torvalds
d46ede3188 pmdomain core: 
- Add support for HW-managed devices
 
 pmdomain providers:
  - amlogic: Add support for the A5 and the A4 power domains
  - arm: Enable system wakeups for the SCMI PM domain
  - qcom/clk: Add HW-mode callbacks to allow switching of GDSC mode
 
 pmdomain consumers:
  - qcom/media/venus: Enable support for switching GDSC HW-mode on V6
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmaU8RIXHHVsZi5oYW5z
 c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnrbhAAqWQWOxXxZ9QHYgmE8K+fc96h
 9e67dF2WjvBbipGEj63ijCRei9pChyHaIWPLSN/pHusfxTHaLqC2RTRf7Os/4TCm
 vwaITTvrIBxTHkocHVKDNUaODo/Mdc6WyhY8DUo+SyoZTvzKxy4QsmHDPsicJ6Q6
 SxN01JrvNAHlOIRwgEm1BSuiL1qCOwg6vjdq/9I+3TVbFCLD8a9dYB8duWYTkupR
 HJqCeTQrrkucVi7LtGPwFZD50KnxK5/wMmug2jjHZ1jhS+iDI6WRoPGgyhlDyDNf
 269Gveog7ewxK8Ny+h38FAgHwXvf0XuW47Zq4Pth7GdUnJH1n5AYGc0HETaFa0Xo
 +DnAm6xbWggSiAfzD63LwhRuv44hCE2vq3Ab10DYYcWC863qOis4t31VAyFsNq4m
 wQejAFPlZMQGUMjJMLRM9jPSYGakasvRjXwcVuv9DjFnku69lzroib8Z2eP6FR/t
 Q7DHVuq1lXbaVk4T4qV/yqgSjSOhEF5F/w1s+dYGygxfdY9Y5YH9dC8WBGtoqAUl
 K9w9UsA9qfVLvlLESRzHFF2oJaIdoqsTwcxykdq3WNaW+G2sGDf89rCpPvFvMLsj
 43MWaxWs4dxS0okfr/hsGhBiCzIegqNbhxsrVdtn6BM/1qLnax7PjT2AEhP0oWL7
 J4jvKcldHF4vNK5Kwlk=
 =ZIDp
 -----END PGP SIGNATURE-----

Merge tag 'pmdomain-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm

Pull pmdomain updates from Ulf Hansson:
 "pmdomain core:
   - Add support for HW-managed devices

  pmdomain providers:
   - amlogic: Add support for the A5 and the A4 power domains
   - arm: Enable system wakeups for the SCMI PM domain
   - qcom/clk: Add HW-mode callbacks to allow switching of GDSC mode

  pmdomain consumers:
   - qcom/media/venus: Enable support for switching GDSC HW-mode on V6"

* tag 'pmdomain-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: amlogic: Constify struct meson_secure_pwrc_domain_desc
  venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode on V6
  clk: qcom: videocc: Use HW_CTRL_TRIGGER for SM8250, SC7280 vcodec GDSC's
  clk: qcom: gdsc: Add set and get hwmode callbacks to switch GDSC mode
  PM: domains: Add the domain HW-managed mode to the summary
  PM: domains: Allow devices attached to genpd to be managed by HW
  pmdomain: amlogic: Add support for A5 power domains controller
  dt-bindings: power: add Amlogic A5 power domains
  pmdomain: amlogic: add missing MODULE_DESCRIPTION() macros
  pmdomain: arm: scmi_pm_domain: set flag GENPD_FLAG_ACTIVE_WAKEUP
  pmdomain: renesas: rmobile-sysc: Use for_each_child_of_node_scoped()
  pmdomain: core: Use genpd_is_irq_safe() helper
  pmdomain: amlogic: Add support for A4 power domains controller
  dt-bindings: power: add Amlogic A4 power domains
 2024-07-15 17:44:59 -07:00
Linus Torvalds
c6e63a9882 pwm: Changes for v6.11-rc1 
This contains the usual mix of fixes, cleanups, two new drivers and
 several dt binding updates. The fixes are for minor issues that are
 already old (4.11-rc1 and 3.9-rc1) and were found by code review and not
 during usage, so I didn't sent them for earlier inclusion.
 
 The changes to include/linux/mfd/stm32-timers.h and
 drivers/counter/stm32-timer-cnt.c are part of an immutable branch that
 will also be included in the mfd and counter PR. It changes some
 register definitions and affects the pwm-stm32 driver.
 
 Thanks go to Andy Shevchenko, AngeloGioacchino Del Regno, Conor Dooley,
 David Lechner, Dhruva Gole, Drew Fustini, Frank Li, Jeff Johnson, Junyi
 Zhao, Kelvin Zhang, Krzysztof Kozlowski, Lee Jones, Linus Walleij, Linus
 Walleij, Michael Hennerich, Nicola Di Lieto, Nicolas Ferre, Nuno Sa,
 Paul Cercueil, Raag Jadav, Rob Herring, Sean Anderson, Sean Young,
 Shenwei Wang, Stefan Wahren, Trevor Gamblin, Tzung-Bi Shih, Vincent
 Whitchurch and William Breathitt Gray for their contributions to this
 pull request; they authored changes, spend time reviewing changes and
 coordinated the above mentioned immutable branch.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmaUYxcACgkQj4D7WH0S
 /k7p9AgAsmKo97xC3XoXbWE2gvgK5LuqIoNfjFGGmcYZV6xsyfte2ZEoED6r6W63
 l/GwbBUKhGPZM/y+VL8QoXxWRRx/XmTjsawCX0d+jHJjw+nluSIVUKMDYmQpaCPg
 UehGaJKjAUqczPytxbTGrHEevArHPN1GieAcayfyOI7iqQomLklZ2VX3PKbgVcjC
 3EMfyAK9JPJ3x6IvMVZQeZa4/OhLv78p2p1mLWaXjpmp5GErPHujBz4ByPtqUAgt
 YWGFWlFOvy1EQsGwJ2qsUa/ZAfe5AkcmaJ4HwhBHe5Vv4pm8c9oC66DUUeKbyNMP
 O5QPPEN3gr9EWL9VQaGOyfY7JAfvaQ==
 =/dpI
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux

Pull pwm updates from Uwe Kleine-König:
 "This contains the usual mix of fixes, cleanups, two new drivers and
  several dt binding updates. The fixes are for minor issues that are
  already old (4.11-rc1 and 3.9-rc1) and were found by code review and
  not during usage, so I didn't sent them for earlier inclusion.

  The changes to include/linux/mfd/stm32-timers.h and
  drivers/counter/stm32-timer-cnt.c are part of an immutable branch that
  will also be included in the mfd and counter pulls. It changes some
  register definitions and affects the pwm-stm32 driver.

  Thanks go to Andy Shevchenko, AngeloGioacchino Del Regno, Conor
  Dooley, David Lechner, Dhruva Gole, Drew Fustini, Frank Li, Jeff
  Johnson, Junyi Zhao, Kelvin Zhang, Krzysztof Kozlowski, Lee Jones,
  Linus Walleij, Linus Walleij, Michael Hennerich, Nicola Di Lieto,
  Nicolas Ferre, Nuno Sa, Paul Cercueil, Raag Jadav, Rob Herring, Sean
  Anderson, Sean Young, Shenwei Wang, Stefan Wahren, Trevor Gamblin,
  Tzung-Bi Shih, Vincent Whitchurch and William Breathitt Gray for their
  contributions to this pull request; they authored changes, spend time
  reviewing changes and coordinated the above mentioned immutable
  branch"

* tag 'pwm/for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (38 commits)
  pwm: axi-pwmgen: add .max_register to regmap
  dt-bindings: pwm: at91: Add sama7d65 compatible string
  pwm: atmel-tcb: Make private data variable naming consistent
  pwm: atmel-tcb: Simplify checking the companion output
  pwm: Allow pwm state transitions from an invalid state
  pwm: xilinx: Simplify using devm_ functions
  pwm: Use guards for pwm_lookup_lock instead of explicity mutex_lock + mutex_unlock
  pwm: Use guards for export->lock instead of explicity mutex_lock + mutex_unlock
  pwm: Use guards for pwm_lock instead of explicity mutex_lock + mutex_unlock
  pwm: Register debugfs operations after the pwm class
  pwm: imx-tpm: Enable pinctrl setting for sleep state
  pwm: lpss: drop redundant runtime PM handles
  pwm: lpss: use devm_pm_runtime_enable() helper
  pwm-stm32: Make use of parametrised register definitions
  dt-bindings: pwm: imx: remove interrupt property from required
  pwm: meson: Add support for Amlogic S4 PWM
  pwm: Add GPIO PWM driver
  dt-bindings: pwm: Add pwm-gpio
  pwm: Drop pwm_apply_state()
  bus: ts-nbus: Use pwm_apply_might_sleep()
  ...
 2024-07-15 17:42:28 -07:00
Linus Torvalds
500a711df6 hwmon updates for v6.11-rc1 
* Obsolete driver removals
 
   - Removed obsolete adm1021 and max6642 drivers
 
 * New drivers
 
   - MPS MP2891
 
   - MPS MP2993
 
   - MPS MP9941
 
   - MPS MP5920
 
   - SPD5118 (Temperature Sensor and EEPROM)
 
 * Added device support to existing drivers
 
   - g762: G761
 
   - dell-smm: Dell OptiPlex 7060
 
   - asus-ec-sensors: ProArt X670E-CREATOR WIFI
 
   - corsair-psu: HX1200i Series 2023 psu
 
   - nzxt-smart2: Additional USB IS for NZXT RGB & Fan Controller
 
 * Notable enhancements and fixes
 
   - Removed use of i2c_match_id()
 
   - Constified struct regmap_config where feasible
 
   - Cleaned up amc6821 driver, and converted to use regmap and with_info API
 
   - Converted max6639 driver to use with_info API; added support for
     additional sysfs attributes
 
   - Fixed various sysfs attribute underflows
 
   - Added PEC support to hwmon core, and use in lm90 and max31827 drivers
 
 * Various other minor fixes and improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmaUaiIACgkQyx8mb86f
 mYHnbRAAhyaqFF1w5B/XEuZOQ3obG+pAV1ZioE7wXpeRDlniJ9/WgFe4bPpvTNQm
 C2LHW6kVtwxybM/FOJz9BN32WiP9v2kp9upb7hhHHo32+5dv57iQR5lB+JC/7lpy
 HLisqLrPc5eDQlUiOdeph5fsKyuydxQkefbR1x4shxmcgn+D5M+AYjuAZOA6fSun
 spSzgTyPGWgGfhQjSzKoA7DHG3S2pFxRTfqOArvKLOM+ahyOCFuS8Kbq/JpqvalB
 moiyIJUeOrgJcTcHSecQ/uFxFiShGBs6EQ1Ao8O9kO0WFw7ke1fw/fWESeTvtiBm
 0Z3zfqAIKcnCXvKEupltWXf6kASx5LSlycODTZQlXEROeYhzhJw3J5qF4h0r4+EM
 oKmptVLLLekVYrjQlarBtHqpdfnwsL1GuQTk5fZz7ZbG85/ktKV6aGTeKGYdBvll
 zZSjz3Jys2u191uxATpJ3vmjaggPylX6dXgmJ9u9lW16+/OnNq7sWURekIfE3F+P
 dpZsaia2KN3WAnX/qLQWOOOBbkIIGxn48e+Hi6QY9igVUbY+P/BBfhb9UiWonLKU
 exRxAFNV5a4nM0ipJF4odwMqzC9ZjrpY6zFQFZCrG79zOO62/gADUAVzwu2LGGig
 p6hqGJmEOkJgYd0zo8KP8ABwgffn8EAtgXBtQU0RS/ls7Z0S58U=
 =ebWS
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "Obsolete driver removals:

   - Removed obsolete adm1021 and max6642 drivers

  New drivers:

   - MPS MP2891, MP2993, MP9941, and MP5920

   - SPD5118 (Temperature Sensor and EEPROM)

  Added device support to existing drivers:

   - g762: G761

   - dell-smm: Dell OptiPlex 7060

   - asus-ec-sensors: ProArt X670E-CREATOR WIFI

   - corsair-psu: HX1200i Series 2023 psu

   - nzxt-smart2: Additional USB IS for NZXT RGB & Fan Controller

  Notable enhancements and fixes:

   - Removed use of i2c_match_id()

   - Constified struct regmap_config where feasible

   - Cleaned up amc6821 driver, and converted to use regmap and
     with_info API

   - Converted max6639 driver to use with_info API; added support for
     additional sysfs attributes

   - Fixed various sysfs attribute underflows

   - Added PEC support to hwmon core, and use in lm90 and max31827
     drivers

  And various other minor fixes and improvements"

* tag 'hwmon-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (103 commits)
  hwmon: (max6697) Fix swapped temp{1,8} critical alarms
  hwmon: (max6697) Fix underflow when writing limit attributes
  hwmon: Remove obsolete adm1021 and max6642 drivers
  hwmon: (pmbus/ltc4286) Drop unused i2c device ids
  hwmon: (g762) Initialize fans after configuring clock
  hwmon: (amc6821) Add support for pwm1_mode attribute
  hwmon: (amc6821) Convert to with_info API
  hwmon: (amc6821) Convert to use regmap
  hwmon: (amc6821) Drop unnecessary enum chips
  hwmon: (amc6821) Use BIT() and GENMASK()
  hwmon: (amc6821) Use tabs for column alignment in defines
  hwmon: (amc6821) Reorder include files, drop unnecessary ones
  hwmon: (amc6821) Add support for fan1_target and pwm1_enable mode 4
  hwmon: (amc6821) Rename fan1_div to fan1_pulses
  hwmon: (amc6821) Make reading and writing fan speed limits consistent
  hwmon: (amc6821) Stop accepting invalid pwm values
  hwmon: (w83627ehf) Fix underflows seen when writing limit attributes
  hwmon: (nct6775-core) Fix underflows seen when writing limit attributes
  hwmon: (lm95234) Fix underflows seen when writing limit attributes
  hwmon: (adc128d818) Fix underflows seen when writing limit attributes
  ...
 2024-07-15 17:39:13 -07:00
Linus Torvalds
e763c9ec71 pwrseq updates for v6.11-rc1 
- add the pwrseq core framework
 - add the first power sequencing driver: pwrseq-qcom-wcn
 - add power control (pwrctl) changes to PCI core
 - add the first PCI pwrctl power sequencing driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmaQ72wACgkQEacuoBRx
 13K4fg//Qd8vxOH06/VSJRCwEvilUfYgDe/WiqTcBXL+8cK/3B0fUhfD83wgMnJn
 /yw2GgS5OjAvYe47nvM4T5M/XMpQ967XTED9cXxJWpBwcee+LZ6hsBGlPuSRunpo
 DQ4EuDh8wQ4j8Gw5pXj7dgtCN7zx4Idj+amh9i2ep+/7ZqT9UFqe294Tq9pX0X+a
 rhOrTooQo4uiwpSAh6k1db3o1VpVDhlx+m2CCQV6V5F3r7eiPv2tQE2B8GvlJlY/
 KjGECsbxKMch6dtKQumRnn3R07v1b3SlQOQOSP99blNv8dfDBOKS0dFPI4se2n2b
 FvKCtmfC9QD9MPvTFKGSIZTTLMInfGpniLyxMD3Ubu+l26AA7eLpv4BICExFo71c
 5gM/Xm8ypsrW7WadhAsl0mNS1CpbFZ2jNTBtuBrP5AFTMOvPqmYbN0VjRgYbX0Yw
 qXyu540iP8t8c0eTqRyrabhXFEehTso5cJGqtKvIARuoK1rF+wOPxTBU+RHjJWg/
 xp7ckCGP+VymcD1xNGpHPweHxwu0z2RMI4zYg2i6WOjWz6FY/V2x1Pf3PGlXF7pq
 yaTMqK5tiGizCF2/RNFGDFQ8re0qtZfh6/mNtT45GGbUBaYltPGQFdFhsaI6rwEi
 LMO7M387u0fPJlS0/ib8I+S5ZfKo65xjC/jQSuUL8WfQf85Ck9k=
 =rI5g
 -----END PGP SIGNATURE-----

Merge tag 'pwrseq-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull power sequencing updates from Bartosz Golaszewski:
 "This has been in development since last year's Linux Plumbers
  Conference and was inspired by the need to enable support upstream for
  Bluetooth/WLAN chips on Qualcomm platforms.

  The main problem we're fixing is powering up devices which are
  represented as separate objects in the kernel (binding to different
  drivers) but which share parts of the power-up sequence and thus need
  some kind of a mediator who knows the possible interactions and can
  assure they don't interfere with neither device's bring up. An example
  of such an inter-driver interaction is the WCN family of BT/WLAN chips
  from Qualcomm of which some models require the user to observe a
  certain delay between driving the bt-enable and wlan-enable GPIOs.

  This is not a new problem but up to this point all attempts at
  addressing it ended up hitting one wall or another and being dropped.
  The main obstacle was the fact that most these attempts tried to
  introduce the concept of a "power sequence" into the device-tree
  bindings which breaks the main DT rule: describe the hardware, not its
  behavior. The solution I proposed focuses on making the power
  sequencer drivers interpret the actual HW description flexibly. More
  details on that are in the linked cover letter.

  The second problem fixed here is powering up PCI devices before they
  are detected on the bus. This is achieved by creating special platform
  devices for device-tree nodes describing hard-wired PCI devices which
  bind to the so-called PCI power control drivers which enable required
  resources and trigger a bus rescan once the controlled device is up
  then setup the correct devlink hierarchy for power-management.

  By combining the two new frameworks we implemented the power
  sequencing PCI power control driver which is capable of powering up
  the WLAN modules of the QCom WCN family of chipsets.

  All this has spent a significant amount of time in linux-next and
  enabled WLAN/BT support on several Qualcomm platforms. To further
  prove that this is useful and needed: right after this was picked up
  into next, I was sent a series using the subsystem for a similar
  use-case on Amlogic platforms.

  This contains the core power sequencing framework, the first driver,
  PCI changes using the pwrseq library (blessed by Bjorn Helgaas) and
  some fixes that came later"

* tag 'pwrseq-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  PCI/pwrctl: only call of_platform_populate() if CONFIG_OF is enabled
  power: sequencing: simplify returning pointer without cleanup
  PCI/pwrctl: Add a PCI power control driver for power sequenced devices
  PCI/pwrctl: Add PCI power control core code
  PCI/pwrctl: Create platform devices for child OF nodes of the port node
  PCI/pwrctl: Reuse the OF node for power controlled devices
  PCI: Hold the rescan mutex when scanning for the first time
  power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets
  power: sequencing: implement the pwrseq core
 2024-07-15 17:34:31 -07:00
Linus Torvalds
89c4913893 chrome platform changes for 6.11 
* New
 
   - Add "cros_ec_hwmon" driver to expose fan speed and temperature.
 
   - Add "cros_charge-control" driver to control charge thresholds and
     behaviour.
 
   - Add module parameter "log_poll_period_ms" in cros_ec_debugfs for
     tuning the poll period.
 
   - Support version 3 of EC_CMD_GET_NEXT_EVENT and keyboard matrix.
 
 * Fixes
 
   - Fix a race condition in accessing MEC (Microchip EC) memory between
     ACPI and kernel.  Serialize the memory access by an AML (ACPI
     Machine Language) mutex.
 
   - Fix an issue of wrong EC message version in cros_ec_debugfs.
 
 * Misc
 
   - Fix kernel-doc errors and cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iIkEABYKADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZo04zBMcdHp1bmdiaUBr
 ZXJuZWwub3JnAAoJECvFMQYG2jz0bf0BAOjE7APATFsKLuFmtKxk/1XlsspsRTWK
 vocdNAKuj9I5AQCdcrHcDreLz5ldqodCpOc4TXiZoLHIkELNQcQtOorhDw==
 =To8o
 -----END PGP SIGNATURE-----

Merge tag 'tag-chrome-platform-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Tzung-Bi Shih:
 "New code:

   - Add "cros_ec_hwmon" driver to expose fan speed and temperature

   - Add "cros_charge-control" driver to control charge thresholds and
     behaviour

   - Add module parameter "log_poll_period_ms" in cros_ec_debugfs for
     tuning the poll period

   - Support version 3 of EC_CMD_GET_NEXT_EVENT and keyboard matrix

  Fixes:

   - Fix a race condition in accessing MEC (Microchip EC) memory between
     ACPI and kernel. Serialize the memory access by an AML (ACPI
     Machine Language) mutex

   - Fix an issue of wrong EC message version in cros_ec_debugfs

  Misc:

   - Fix kernel-doc errors and cleanups"

* tag 'tag-chrome-platform-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (28 commits)
  power: supply: cros_charge-control: Fix signedness bug in charge_behaviour_store()
  power: supply: cros_charge-control: Avoid accessing attributes out of bounds
  power: supply: cros_charge-control: don't load if Framework control is present
  power: supply: add ChromeOS EC based charge control driver
  platform/chrome: cros_ec_proto: Introduce cros_ec_get_cmd_versions()
  platform/chrome: Update binary interface for EC-based charge control
  ACPI: battery: add devm_battery_hook_register()
  dt-bindings: input: cros-ec-keyboard: Add keyboard matrix v3.0
  platform/chrome: cros_ec_lpc: Handle zero length read/write
  platform/chrome: cros_ec_lpc: Fix error code in cros_ec_lpc_mec_read_bytes()
  platform/chrome: cros_ec_debugfs: fix wrong EC message version
  platform/chrome: cros_ec_proto: update Kunit test for get_next_data_v3
  platform/chrome: cros_ec_proto: add missing MODULE_DESCRIPTION() macro
  hwmon: (cros_ec) Fix access to restricted __le16
  hwmon: (cros_ec) Prevent read overflow in probe()
  platform/chrome: cros_ec_lpc: Add quirks for Framework Laptop
  platform/chrome: cros_ec_lpc: Add a new quirk for AML mutex
  platform/chrome: cros_ec_lpc: Add a new quirk for ACPI id
  platform/chrome: cros_ec_lpc: MEC access can use an AML mutex
  platform/chrome: cros_ec_lpc: MEC access can return error code
  ...
 2024-07-15 17:25:38 -07:00
Linus Torvalds
c89d780cc1 arm64 updates for 6.11: 
* Virtual CPU hotplug support for arm64 ACPI systems
 
 * cpufeature infrastructure cleanups and making the FEAT_ECBHB ID bits
   visible to guests
 
 * CPU errata: expand the speculative SSBS workaround to more CPUs
 
 * arm64 ACPI:
 
   - acpi=nospcr option to disable SPCR as default console for arm64
 
   - Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
 
 * GICv3, use compile-time PMR values: optimise the way regular IRQs are
   masked/unmasked when GICv3 pseudo-NMIs are used, removing the need for
   a static key in fast paths by using a priority value chosen
   dynamically at boot time
 
 * arm64 perf updates:
 
   - Rework of the IMX PMU driver to enable support for I.MX95
 
   - Enable support for tertiary match groups in the CMN PMU driver
 
   - Initial refactoring of the CPU PMU code to prepare for the fixed
     instruction counter introduced by Arm v9.4
 
   - Add missing PMU driver MODULE_DESCRIPTION() strings
 
   - Hook up DT compatibles for recent CPU PMUs
 
 * arm64 kselftest updates:
 
   - Kernel mode NEON fp-stress
 
   - Cleanups, spelling mistakes
 
 * arm64 Documentation update with a minor clarification on TBI
 
 * Miscellaneous:
 
   - Fix missing IPI statistics
 
   - Implement raw_smp_processor_id() using thread_info rather than a
     per-CPU variable (better code generation)
 
   - Make MTE checking of in-kernel asynchronous tag faults conditional
     on KASAN being enabled
 
   - Minor cleanups, typos
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmaQKN4ACgkQa9axLQDI
 XvE0Nw/+JZ6OEQ+DMUHXZfbWanvn1p0nVOoEV3MYVpOeQK1ILYCoDapatLNIlet0
 wcja7tohKbL1ifc7GOqlkitu824LMlotncrdOBycRqb/4C5KuJ+XhygFv5hGfX0T
 Uh2zbo4w52FPPEUMICfEAHrKT3QB9tv7f66xeUNbWWFqUn3rY02/ZVQVVdw6Zc0e
 fVYWGUUoQDR7+9hRkk6tnYw3+9YFVAUAbLWk+DGrW7WsANi6HuJ/rBMibwFI6RkG
 SZDZHum6vnwx0Dj9H7WrYaQCvUMm7AlckhQGfPbIFhUk6pWysfJtP5Qk49yiMl7p
 oRk/GrSXpiKumuetgTeOHbokiE1Nb8beXx0OcsjCu4RrIaNipAEpH1AkYy5oiKoT
 9vKZErMDtQgd96JHFVaXc+A3D2kxVfkc1u7K3TEfVRnZFV7CN+YL+61iyZ+uLxVi
 d9xrAmwRsWYFVQzlZG3NWvSeQBKisUA1L8JROlzWc/NFDwTqDGIt/zS4pZNL3+OM
 EXW0LyKt7Ijl6vPXKCXqrODRrPlcLc66VMZxofZOl0/dEqyJ+qLL4GUkWZu8lTqO
 BqydYnbTSjiDg/ntWjTrD0uJ8c40Qy7KTPEdaPqEIQvkDEsUGlOnhAQjHrnGNb9M
 psZtpDW2xm7GykEOcd6rgSz4Xeky2iLsaR4Wc7FTyDS0YRmeG44=
 =ob2k
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:
 "The biggest part is the virtual CPU hotplug that touches ACPI,
  irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
  been queued via the arm64 tree. Otherwise the usual perf updates,
  kselftest, various small cleanups.

  Core:

   - Virtual CPU hotplug support for arm64 ACPI systems

   - cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
     bits visible to guests

   - CPU errata: expand the speculative SSBS workaround to more CPUs

   - GICv3, use compile-time PMR values: optimise the way regular IRQs
     are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
     need for a static key in fast paths by using a priority value
     chosen dynamically at boot time

  ACPI:

   - 'acpi=nospcr' option to disable SPCR as default console for arm64

   - Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/

  Perf updates:

   - Rework of the IMX PMU driver to enable support for I.MX95

   - Enable support for tertiary match groups in the CMN PMU driver

   - Initial refactoring of the CPU PMU code to prepare for the fixed
     instruction counter introduced by Arm v9.4

   - Add missing PMU driver MODULE_DESCRIPTION() strings

   - Hook up DT compatibles for recent CPU PMUs

  Kselftest updates:

   - Kernel mode NEON fp-stress

   - Cleanups, spelling mistakes

  Miscellaneous:

   - arm64 Documentation update with a minor clarification on TBI

   - Fix missing IPI statistics

   - Implement raw_smp_processor_id() using thread_info rather than a
     per-CPU variable (better code generation)

   - Make MTE checking of in-kernel asynchronous tag faults conditional
     on KASAN being enabled

   - Minor cleanups, typos"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
  selftests: arm64: tags: remove the result script
  selftests: arm64: tags_test: conform test to TAP output
  perf: add missing MODULE_DESCRIPTION() macros
  arm64: smp: Fix missing IPI statistics
  irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
  ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
  Documentation: arm64: Update memory.rst for TBI
  arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
  KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
  perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
  perf: arm_v6/7_pmu: Drop non-DT probe support
  perf/arm: Move 32-bit PMU drivers to drivers/perf/
  perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
  perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
  arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
  perf: imx_perf: add support for i.MX95 platform
  perf: imx_perf: fix counter start and config sequence
  perf: imx_perf: refactor driver for imx93
  perf: imx_perf: let the driver manage the counter usage rather the user
  perf: imx_perf: add macro definitions for parsing config attr
  ...
 2024-07-15 17:06:19 -07:00
Linus Torvalds
895b9b1207 cgroup: Changes for v6.11 
- Added Michal Koutný as a maintainer.
 
 - Counters in pids.events were behaving inconsistently. pids.events made
   properly hierarchical and pids.events.local added.
 
 - misc.peak and misc.events.local added.
 
 - cpuset remote partition creation and cpuset.cpus.exclusive handling
   improved.
 
 - Code cleanups, non-critical fixes, doc updates.
 
 - for-6.10-fixes is merged in to receive two non-critical fixes that didn't
   trigger pull.
 -----BEGIN PGP SIGNATURE-----
 
 iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZpSsdw4cdGpAa2VybmVs
 Lm9yZwAKCRCxYfJx3gVYGSEMAQDQ5VfcRz+rW20ez5IAgyN3EKIwSbW6pY6jojgj
 bJtJSQD/TzA8DoRxcCvTdHcZcwJ2e2zBVcuM8NkZHfSCNiPrrgs=
 =5f3I
 -----END PGP SIGNATURE-----

Merge tag 'cgroup-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

Pull cgroup updates from Tejun Heo:

 - Added Michal Koutný as a maintainer

 - Counters in pids.events were behaving inconsistently. pids.events
   made properly hierarchical and pids.events.local added

 - misc.peak and misc.events.local added

 - cpuset remote partition creation and cpuset.cpus.exclusive handling
   improved

 - Code cleanups, non-critical fixes, doc updates

 - for-6.10-fixes is merged in to receive two non-critical fixes that
   didn't trigger pull

* tag 'cgroup-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
  cgroup: Add Michal Koutný as a maintainer
  cgroup/misc: Introduce misc.events.local
  cgroup/rstat: add force idle show helper
  cgroup: Protect css->cgroup write under css_set_lock
  cgroup/misc: Introduce misc.peak
  cgroup_misc: add kernel-doc comments for enum misc_res_type
  cgroup/cpuset: Prevent UAF in proc_cpuset_show()
  selftest/cgroup: Update test_cpuset_prs.sh to match changes
  cgroup/cpuset: Make cpuset.cpus.exclusive independent of cpuset.cpus
  cgroup/cpuset: Delay setting of CS_CPU_EXCLUSIVE until valid partition
  selftest/cgroup: Fix test_cpuset_prs.sh problems reported by test robot
  cgroup/cpuset: Fix remote root partition creation problem
  cgroup: avoid the unnecessary list_add(dying_tasks) in cgroup_exit()
  cgroup/cpuset: Optimize isolated partition only generate_sched_domains() calls
  cgroup/cpuset: Reduce the lock protecting CS_SCHED_LOAD_BALANCE
  kernel/cgroup: cleanup cgroup_base_files when fail to add cgroup_psi_files
  selftests: cgroup: Add basic tests for pids controller
  selftests: cgroup: Lexicographic order in Makefile
  cgroup/pids: Add pids.events.local
  cgroup/pids: Make event counters hierarchical
  ...
 2024-07-15 16:41:32 -07:00
Linus Torvalds
e4b2b0b1e4 kcsan: Add __data_racy documentation and module description 
This series contains on commit that improves the documentation for the
 new __data_racy type qualifier to the data_race() macro's kernel-doc
 header and to the LKMM's access-marking documentation.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmaRubITHHBhdWxtY2tA
 a2VybmVsLm9yZwAKCRCevxLzctn7jLWlD/99wMLUIfPh1cvWVVyhv8tytWuLJn6y
 olwukg9pOCz6WGucECfjAC2kFivSQYxS3b54K697tF4hnABEtpsx7ozkv11kgyR8
 niHNv4P+L+0J7CnM/g7gkLrAGosdo+PF7rUhX3u3kpeasVjJ5NyK379jUeTjrDrc
 ia34vjbVVNdJ5v0c4ITxbbV/NKecbsadRSqDLzjtNrFPkwo/yfFCrz8ddztadsTd
 4jftt/L4Up51QQ8NAgiHsHdp+iY/FRjwd/QtvEXSVUZ38sGseH+eNqn4hMuyTnka
 cjnHwAlTbEfAuR3Mdcz25ToiaI6qNxptvvM7E9+LtHuBhI+h6vEvdvPMmSFo48Rv
 kzdPix39O5dqpu49nz/Qsmmr/AWn9i3M5oht62YMJ5twoutDFAcc5MMppPT6sNsX
 Kq3fn8fjRvdHqgE3jBYOgDDWEZuTxdtcdv8wKfplID/SgyjXL48fghMEl62b2O1d
 X6PrHhKARk7RKMndAPk0UNz4m8T5oDmKu9Z9mF8UidjeZjYU0tVYPAoN1H/9lVdH
 Kn2DoTW5Oz2A21z37r5SGAro0QBE50ZMYA+xH+Ab3fyfFcd4l4ia/wu06c3AVJFc
 DqgKJ7f3YQ7tHGLf0AEpO6o/nNZGxwDHJ5Pjbteu2RwbCcUHmUtKxrM+McPXTvuv
 MjW/IAvvPdMxCw==
 =r0/X
 -----END PGP SIGNATURE-----

Merge tag 'kcsan.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull KCSAN updates from Paul McKenney:

 - improve the documentation for the new __data_racy type qualifier
   to the data_race() macro's kernel-doc header and to the LKMM's
   access-marking documentation

 - add missing MODULE_DESCRIPTION

* tag 'kcsan.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  kcsan: Add missing MODULE_DESCRIPTION() macro
  kcsan: Add example to data_race() kerneldoc header
 2024-07-15 15:44:40 -07:00
Linus Torvalds
9855e87328 RCU pull request for v6.11 
doc.2024.06.06a: Update Tasks RCU and Tasks Rude RCU description in
 	Requirements.rst and clarify rcu_assign_pointer() and
 	rcu_dereference() ordering properties.
 
 fixes.2024.07.04a: Add lockdep assertions for RCU readers, limit inline
 	wakeups for callback-bypass synchronize_rcu(), add an
 	rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter,
 	add Uladzislau Rezki as RCU maintainer, and fix a subtle
 	callback-migration memory-ordering issue.
 
 mb.2024.06.28a: Remove a number of redundant memory barriers.
 
 nocb.2024.06.03a: Remove unnecessary bypass-list lock-contention
 	mitigation, use parking API instead of open-coded ad-hoc
 	equivalent, and upgrade obsolete comments.
 
 rcu-tasks.2024.06.06a: Revert avoidance of a deadlock that can no
 	longer occur and properly synchronize Tasks Trace RCU checking
 	of runqueues.
 
 rcutorture.2024.06.06a: Add tests for handling of double-call_rcu()
 	bug, add missing MODULE_DESCRIPTION, and add a script that
 	histograms the number of calls to RCU updaters.
 
 srcu.2024.06.18a: Fill out SRCU polled-grace-period API.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmaR7/QTHHBhdWxtY2tA
 a2VybmVsLm9yZwAKCRCevxLzctn7jGwAEACJKef2LryG6khoJdorWbvRf1V2k23H
 19CxXexCE4UoGsgGST9z1/5rM8kBdNhdhQ0JB9CitW+zGlXpOM79/mO3gALKMj++
 YBPw9B5EM622H2cKJGFzoHFSO4X9nM1CCMeuFCo6bVsbWfMtX3ENqsYl2IQy1JkB
 pGiKqcNXGWU0mdUcZKs/8ilfLG1NhaLwrkfinlsP9V1+8z8LxxDH5Qh27AT3rIvu
 W87OITTZoHlUaDVHYTautHTZoqM381xv9kNoQlS9lpH/gcFOPiO9DLj8NcLjkJ4y
 S/OrxOwfQ+BGKwnk8daFQFAc3Nr9KeVAQH7CbOW7guARhj3z97J0+wPm6nZGEE2s
 tDzg8zLT9LtbmUypJLurl29+wFE4fPNsnd69XDONbMFN1Ox2tJM3dd/rPCsHSUvz
 kEOK9gUreHOv7/Ou6UIHlYVlHY7HHuD7TAsrhaaWk7CEmlY31UKwXG+fMl1FAnSy
 F3PcBF/1M687RRFWVeMlug/+0/+ghtc+kZ1YyR79KZR6dI0C7ueQbCBGztCCtFDz
 RjrHcDifS0Y2GNQO9+zAyrJvttidRATdYDeFstk+8nnta3CnYzxCp4rn5hs3Ss3N
 AJVJm244jR3AcoL4V/tQwiQlYh9ZYN5tZ7qxFiASdtV50Uc8HoIrWXeP0Ar+GHiV
 2z/f5fKF4+5clQ==
 =7a1C
 -----END PGP SIGNATURE-----

Merge tag 'rcu.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU updates from Paul McKenney:

 - Update Tasks RCU and Tasks Rude RCU description in Requirements.rst
   and clarify rcu_assign_pointer() and rcu_dereference() ordering
   properties

 - Add lockdep assertions for RCU readers, limit inline wakeups for
   callback-bypass synchronize_rcu(), add an
   rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter, add
   Uladzislau Rezki as RCU maintainer, and fix a subtle
   callback-migration memory-ordering issue

 - Remove a number of redundant memory barriers

 - Remove unnecessary bypass-list lock-contention mitigation, use
   parking API instead of open-coded ad-hoc equivalent, and upgrade
   obsolete comments

 - Revert avoidance of a deadlock that can no longer occur and properly
   synchronize Tasks Trace RCU checking of runqueues

 - Add tests for handling of double-call_rcu() bug, add missing
   MODULE_DESCRIPTION, and add a script that histograms the number of
   calls to RCU updaters

 - Fill out SRCU polled-grace-period API

* tag 'rcu.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
  rcu: Fix rcu_barrier() VS post CPUHP_TEARDOWN_CPU invocation
  rcu: Eliminate lockless accesses to rcu_sync->gp_count
  MAINTAINERS: Add Uladzislau Rezki as RCU maintainer
  rcu: Add rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter
  rcu/exp: Remove redundant full memory barrier at the end of GP
  rcu: Remove full memory barrier on RCU stall printout
  rcu: Remove full memory barrier on boot time eqs sanity check
  rcu/exp: Remove superfluous full memory barrier upon first EQS snapshot
  rcu: Remove superfluous full memory barrier upon first EQS snapshot
  rcu: Remove full ordering on second EQS snapshot
  srcu: Fill out polled grace-period APIs
  srcu: Update cleanup_srcu_struct() comment
  srcu: Add NUM_ACTIVE_SRCU_POLL_OLDSTATE
  srcu: Disable interrupts directly in srcu_gp_end()
  rcu: Disable interrupts directly in rcu_gp_init()
  rcu/tree: Reduce wake up for synchronize_rcu() common case
  rcu/tasks: Fix stale task snaphot for Tasks Trace
  tools/rcu: Add rcu-updaters.sh script
  rcutorture: Add missing MODULE_DESCRIPTION() macros
  rcutorture: Fix rcu_torture_fwd_cb_cr() data race
  ...
 2024-07-15 15:25:27 -07:00
Linus Torvalds
4fd9435641 Updates for timers, timekeeping and related functionality: 
- Core:
 
     - Make the takeover of a hrtimer based broadcast timer reliable during
       CPU hot-unplug. The current implementation suffers from a race which
       can lead to broadcast timer starvation in the worst case.
 
     - VDSO related cleanups and simplifications
 
     - Small cleanups and enhancements all over the place
 
   - PTP:
 
     - Replace the architecture specific base clock to clocksource, e.g. ART
       to TSC, conversion function with generic functionality to avoid
       exposing such internals to drivers and convert all existing drivers
       over. This also allows to provide functionality which converts the
       other way round in the core code based on the same parameter set.
 
     - Provide a function to convert CLOCK_REALTIME to the base clock to
       support the upcoming PPS output driver on Intel platforms.
 
   - Drivers:
 
     - A set of Device Tree bindings for new hardware
 
     - Cleanups and enhancements all over the place
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmaUOM0THHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYofolD/9kK+aYdDj1gCFuZXZ2wTgMMxFmf/91
 0UcsGRuBJiIXs3H3iizQ0Mb0cdTW6qZJoBp0jPlvUSm0BEKdEgE1uRX2RuAPZ/Gq
 4/54ZJVopKSgAqeJFmqQubRVSv2XdMRAAJT0o1oUG3jZ0c6u8vqArIh5ZCnu13l/
 tsNOeYLYzQFyA30eHSJ/KjQ2zHwAhJnl5a/b7pdAvxmlN37bGgKEpglv+9zwFiDB
 K/kWbpb/oED9WOmoQy5QYi8iSvLQHEhFGrqzXV3fegu/B/mBBf/bpsisVx7Z1m2R
 nzxNqg86RdMjNR6giwBETZjm7YxM+gKb9nCBNILjbjWZFC4tyrBkLGJ+KniTRNyZ
 M5R4X1oP/14h00qXmCgIEFWysXaJRewYI+TIm8R2rLXrR6Tf3c4oL6fHQJxy3X52
 7A+4Z/vOk/KX6PxYmLC+xQDukhFh2nirVYsP1oNM9yC9zR/wkBBXTTmUSAI+8m8l
 KphniSPS2HMSBI6TtgOT8SKY7lRUZTnafBZq7wRXCv0Zz8AXoofgQDmBkXC99BkB
 MjLvRotJVJvY9a8LtA7htjDg/jiEMa0wHRNAGNSbflKoAKrJzoE5WbFxFZKbq3vZ
 o8cEYRMAIP+X+qn+oymT45XXXQlifZiccJdAi9FqDTvplEib2jmTmH6Ae5Khkr4l
 Lbzh/nSKVN7lOg==
 =8GjP
 -----END PGP SIGNATURE-----

Merge tag 'timers-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates from Thomas Gleixner:
 "Updates for timers, timekeeping and related functionality:

  Core:

   - Make the takeover of a hrtimer based broadcast timer reliable
     during CPU hot-unplug. The current implementation suffers from a
     race which can lead to broadcast timer starvation in the worst
     case.

   - VDSO related cleanups and simplifications

   - Small cleanups and enhancements all over the place

  PTP:

   - Replace the architecture specific base clock to clocksource, e.g.
     ART to TSC, conversion function with generic functionality to avoid
     exposing such internals to drivers and convert all existing drivers
     over. This also allows to provide functionality which converts the
     other way round in the core code based on the same parameter set.

   - Provide a function to convert CLOCK_REALTIME to the base clock to
     support the upcoming PPS output driver on Intel platforms.

  Drivers:

   - A set of Device Tree bindings for new hardware

   - Cleanups and enhancements all over the place"

* tag 'timers-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  clocksource/drivers/realtek: Add timer driver for rtl-otto platforms
  dt-bindings: timer: Add schema for realtek,otto-timer
  dt-bindings: timer: Add SOPHGO SG2002 clint
  dt-bindings: timer: renesas,tmu: Add R-Car Gen2 support
  dt-bindings: timer: renesas,tmu: Add RZ/G1 support
  dt-bindings: timer: renesas,tmu: Add R-Mobile APE6 support
  clocksource/drivers/mips-gic-timer: Correct sched_clock width
  clocksource/drivers/mips-gic-timer: Refine rating computation
  clocksource/drivers/sh_cmt: Address race condition for clock events
  clocksource/driver/arm_global_timer: Remove unnecessary ‘0’ values from err
  clocksource/drivers/arm_arch_timer: Remove unnecessary ‘0’ values from irq
  tick/broadcast: Make takeover of broadcast hrtimer reliable
  tick/sched: Combine WARN_ON_ONCE and print_once
  x86/vdso: Remove unused include
  x86/vgtod: Remove unused typedef gtod_long_t
  x86/vdso: Fix function reference in comment
  vdso: Add comment about reason for vdso struct ordering
  vdso/gettimeofday: Clarify comment about open coded function
  timekeeping: Add missing kernel-doc function comments
  tick: Remove unnused tick_nohz_get_idle_calls()
  ...
 2024-07-15 15:03:09 -07:00
Linus Torvalds
0eff0491e7 A small set of SMP/CPU hotplug updates: 
- Reverse the order of iteration when freezing secondary CPUs for
     hibernation.
 
     This avoids that drivers like the Intel uncore performance counter have
     to transfer the assignement of handling the per package uncore events
     for every CPU in a package, which is a considerable speedup on larger
     systems.
 
   - Add a missing destroy_work_on_stack() invocation in smp_call_on_cpu()
     to prevent debug objects to emit a false positive warning when the
     stack is freed.
 
   - Small cleanups in comments and a str_plural() conversion
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmaUNnYTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYocjbEACqfc8EkTEJczAMbAaq7Nq7jYGRt5e8
 UyWpbnT1re63TAiGUEAr7pPJd6ucXAwPOHBt0V+j1HIr2UsaGT2/cfnlSipR68xh
 UmqPxXpuba+JeZDS0Bf6gRXKYBogVWFgjP8cp+f9IKr6xMgwJc7ujB9mX0YKmIgz
 bDoaFS+NFSD1ZS7tuidLqfU9UmJYRDRhyZg124HwDXG20zHR2CHgP4QQ2bHOvxZU
 LKbdjoHBmGtkLomS+R1UxsT+onsnE0c1EN37LX0mUE5L1YbUTcbZlXLLG7T35jOO
 rvai+EKVbA2KUAtrM/LZ8WZ0Lt5DTjMrouyzv6of7N2WljijdlxMb04sXl7kdng+
 rohRfDB6yNhQhEnDx6fd+IP/JCpPCctCmkN/QbvMBfnRnTe1yNg/gmnWaY3RAHNM
 GBifAxSEosMn7AMnSs/or6DAVNHVxI3Ms+r4Xb/o1JvGx7PXiBULh1Nww5WdxmBl
 IraXNR/R0qXUokXmNtJrq3aG/SepKWAc0BJJc3b6zA9tf5rsizTaxetTVZLS6jOX
 /DHJOOgAlLRDZdE53YpdL3HVVTdM/BDSM0xpMO7uxdJ4laJ9s+7dFGk9KXxu24qM
 6dIG6hn7D9XT0q05sP+r7qO0ygIe0Qorg5bA+xgvpYdPNrVfQpjzkj5jwkspvk+l
 5/gpTUmVm8Vwhw==
 =M4eq
 -----END PGP SIGNATURE-----

Merge tag 'smp-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull CPU hotplug updates from Thomas Gleixner:
 "A small set of SMP/CPU hotplug updates:

   - Reverse the order of iteration when freezing secondary CPUs for
     hibernation.

     This avoids that drivers like the Intel uncore performance counter
     have to transfer the assignement of handling the per package uncore
     events for every CPU in a package, which is a considerable speedup
     on larger systems.

   - Add a missing destroy_work_on_stack() invocation in
     smp_call_on_cpu() to prevent debug objects to emit a false positive
     warning when the stack is freed.

   - Small cleanups in comments and a str_plural() conversion"

* tag 'smp-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp: Add missing destroy_work_on_stack() call in smp_call_on_cpu()
  cpu/hotplug: Reverse order of iteration in freeze_secondary_cpus()
  smp: Use str_plural() to fix Coccinelle warnings
  cpu/hotplug: Fix typo in comment
 2024-07-15 14:55:30 -07:00
Linus Torvalds
3e78198862 for-6.11/block-20240710 
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmaOTd8QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgppqIEACUr8Vv2FtezvT3OfVSlYWHHLXzkRhwEG5s
 vdk0o7Ow6U54sMjfymbHTgLD0ZOJf3uJ6BI95FQuW41jPzDFVbx4Hy8QzqonMkw9
 1D/YQ4zrVL2mOKBzATbKpoGJzMOzGeoXEueFZ1AYPAX7RrDtP4xPQNfrcfkdE2zF
 LycJN70Vp6lrZZMuI9yb9ts1tf7TFzK0HJANxOAKTgSiPmBmxesjkJlhrdUrgkAU
 qDVyjj7u/ssndBJAb9i6Bl95Do8s9t4DeJq5/6wgKqtf5hClMXzPVB8Wy084gr6E
 rTRsCEhOug3qEZSqfAgAxnd3XFRNc/p2KMUe5YZ4mAqux4hpSmIQQDM/5X5K9vEv
 f4MNqUGlqyqntZx+KPyFpf7kLHFYS1qK4ub0FojWJEY4GrbBPNjjncLJ9+ozR0c8
 kNDaFjMNAjalBee1FxNNH8LdVcd28rrCkPxRLEfO/gvBMUmvJf4ZyKmSED0v5DhY
 vZqKlBqG+wg0EXvdiWEHMDh9Y+q/2XBIkS6NN/Bhh61HNu+XzC838ts1X7lR+4o2
 AM5Vapw+v0q6kFBMRP3IcJI/c0UcIU8EQU7axMyzWtvhog8kx8x01hIj1L4UyYYr
 rUdWrkugBVXJbywFuH/QIJxWxS/z4JdSw5VjASJLIrXy+aANmmG9Wonv95eyhpUv
 5iv+EdRSNA==
 =wVi8
 -----END PGP SIGNATURE-----

Merge tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux

Pull block updates from Jens Axboe:

 - NVMe updates via Keith:
     - Device initialization memory leak fixes (Keith)
     - More constants defined (Weiwen)
     - Target debugfs support (Hannes)
     - PCIe subsystem reset enhancements (Keith)
     - Queue-depth multipath policy (Redhat and PureStorage)
     - Implement get_unique_id (Christoph)
     - Authentication error fixes (Gaosheng)

 - MD updates via Song
     - sync_action fix and refactoring (Yu Kuai)
     - Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
       Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)

 - Fix loop detach/open race (Gulam)

 - Fix lower control limit for blk-throttle (Yu)

 - Add module descriptions to various drivers (Jeff)

 - Add support for atomic writes for block devices, and statx reporting
   for same. Includes SCSI and NVMe (John, Prasad, Alan)

 - Add IO priority information to block trace points (Dongliang)

 - Various zone improvements and tweaks (Damien)

 - mq-deadline tag reservation improvements (Bart)

 - Ignore direct reclaim swap writes in writeback throttling (Baokun)

 - Block integrity improvements and fixes (Anuj)

 - Add basic support for rust based block drivers. Has a dummy null_blk
   variant for now (Andreas)

 - Series converting driver settings to queue limits, and cleanups and
   fixes related to that (Christoph)

 - Cleanup for poking too deeply into the bvec internals, in preparation
   for DMA mapping API changes (Christoph)

 - Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
   Ming, Zhu, Damien, Christophe, Chaitanya)

* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
  floppy: add missing MODULE_DESCRIPTION() macro
  loop: add missing MODULE_DESCRIPTION() macro
  ublk_drv: add missing MODULE_DESCRIPTION() macro
  xen/blkback: add missing MODULE_DESCRIPTION() macro
  block/rnbd: Constify struct kobj_type
  block: take offset into account in blk_bvec_map_sg again
  block: fix get_max_segment_size() warning
  loop: Don't bother validating blocksize
  virtio_blk: Don't bother validating blocksize
  null_blk: Don't bother validating blocksize
  block: Validate logical block size in blk_validate_limits()
  virtio_blk: Fix default logical block size fallback
  nvmet-auth: fix nvmet_auth hash error handling
  nvme: implement ->get_unique_id
  block: pass a phys_addr_t to get_max_segment_size
  block: add a bvec_phys helper
  blk-lib: check for kill signal in ioctl BLKZEROOUT
  block: limit the Write Zeroes to manually writing zeroes fallback
  block: refacto blkdev_issue_zeroout
  block: move read-only and supported checks into (__)blkdev_issue_zeroout
  ...
 2024-07-15 14:20:22 -07:00
Linus Torvalds
3a56e24173 for-6.11/io_uring-20240714 
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmaTgusQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpr+1EAC4I7pRAM341sfmhe/9QQKMM8VzGwy5Tlr1
 AFLO3BujRTl6X8S9fQjIjN1coW6u4F42I19+vVlxqvB7CUnqt9VWpexEjxe4K0FR
 R+hIZW+fWV9K/eMrcsLcI7oReN5kIihHOzzy3wz0rENoGB5dCl6JAZMHDUCSqP0/
 ZJJQ5ut8ah20Y/myHnzP5o4TfdE7nGo73Di2YoE2g3KqeX/dlAKW9+5hqKzzrHhM
 2U25k/6KLy0ROzKpy2qW0QRE3pT5udoHLK2ue9+XwXF8JWVTlfVkHBzGY7NstyyT
 z07SEzW1q4xV1HdCwGDAU7cL2NJMRXSG0p2WZTm8QyaVTdsZQvEx08GLsVdLvFH5
 Gg+oOaxVE+INzW+/Lwz7lFHgq6XEjdAlEAOXDtGkZoni6Rt6iCzFCW6RTf/guy8o
 Cub7tatMyegxai9+FTN/oFVoydRR0tsMf0OHrWnLOperh9CaxAwXvmKFeT/UTwiB
 KIuIOJop7aThJbiV42a/xwTrEjNMZRv6uVBBEtJX3rxpmIhqTbjcAv9rKMmgtLMk
 s6yX1MvYdOLhhEDyoUBX0dJdEETBf3KbnYIwi8kb4Sbkw/ZDgnkmSxFysom61wUF
 byAFEpah3ZFR8aES0uNKUE6UHK6i5qqp0Za/n6gA927E/WGCU9ndaS+01gyknog0
 8FqFYwruHQ==
 =50CO
 -----END PGP SIGNATURE-----

Merge tag 'for-6.11/io_uring-20240714' of git://git.kernel.dk/linux

Pull io_uring updates from Jens Axboe:
 "Here are the io_uring updates queued up for 6.11.

  Nothing major this time around, various minor improvements and
  cleanups/fixes. This contains:

   - Add bind/listen opcodes. Main motivation is to support direct
     descriptors, to avoid needing a regular fd just for doing these two
     operations (Gabriel)

   - Probe fixes (Gabriel)

   - Treat io-wq work flags as atomics. Not fixing a real issue, but may
     as well and it silences a KCSAN warning (me)

   - Cleanup of rsrc __set_current_state() usage (me)

   - Add 64-bit for {m,f}advise operations (me)

   - Improve performance of data ring messages (me)

   - Fix for ring message overflow posting (Pavel)

   - Fix for freezer interaction with TWA_NOTIFY_SIGNAL. Not strictly an
     io_uring thing, but since TWA_NOTIFY_SIGNAL was originally added
     for faster task_work signaling for io_uring, bundling it with this
     pull (Pavel)

   - Add Pavel as a co-maintainer

   - Various cleanups (me, Thorsten)"

* tag 'for-6.11/io_uring-20240714' of git://git.kernel.dk/linux: (28 commits)
  io_uring/net: check socket is valid in io_bind()/io_listen()
  kernel: rerun task_work while freezing in get_signal()
  io_uring/io-wq: limit retrying worker initialisation
  io_uring/napi: Remove unnecessary s64 cast
  io_uring/net: cleanup io_recv_finish() bundle handling
  io_uring/msg_ring: fix overflow posting
  MAINTAINERS: change Pavel Begunkov from io_uring reviewer to maintainer
  io_uring/msg_ring: use kmem_cache_free() to free request
  io_uring/msg_ring: check for dead submitter task
  io_uring/msg_ring: add an alloc cache for io_kiocb entries
  io_uring/msg_ring: improve handling of target CQE posting
  io_uring: add io_add_aux_cqe() helper
  io_uring: add remote task_work execution helper
  io_uring/msg_ring: tighten requirement for remote posting
  io_uring: Allocate only necessary memory in io_probe
  io_uring: Fix probe of disabled operations
  io_uring: Introduce IORING_OP_LISTEN
  io_uring: Introduce IORING_OP_BIND
  net: Split a __sys_listen helper for io_uring
  net: Split a __sys_bind helper for io_uring
  ...
 2024-07-15 13:49:10 -07:00
Jakub Kicinski
51b35d4f9d Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 
Merge in late fixes to prepare for the 6.11 net-next PR.

Conflicts:
  93c3a96c30 ("net: pse-pd: Do not return EOPNOSUPP if config is null")
  4cddb0f15e ("net: ethtool: pse-pd: Fix possible null-deref")
  30d7b67277 ("net: ethtool: Add new power limit get and set features")
https://lore.kernel.org/20240715123204.623520bb@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2024-07-15 13:19:17 -07:00
Alexander Duyck
c5eaf1b3f8 PCI: Add Meta Platforms vendor ID 
Add Meta as a vendor ID for PCI devices so we can use the macro for future
drivers.

Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/172079935272.1778861.13619056509276833225.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2024-07-15 12:50:42 -07:00
Jakub Kicinski
dd3cd3ca69 aux-sysfs-irqs 
Shay Says:
 ==========
 Introduce auxiliary bus IRQs sysfs
 
 Today, PCI PFs and VFs, which are anchored on the PCI bus, display their
 IRQ information in the <pci_device>/msi_irqs/<irq_num> sysfs files.  PCI
 subfunctions (SFs) are similar to PFs and VFs and these SFs are anchored
 on the auxiliary bus. However, these PCI SFs lack such IRQ information
 on the auxiliary bus, leaving users without visibility into which IRQs
 are used by the SFs. This absence makes it impossible to debug
 situations and to understand the source of interrupts/SFs for
 performance tuning and debug.
 
 Additionally, the SFs are multifunctional devices supporting RDMA,
 network devices, clocks, and more, similar to their peer PCI PFs and
 VFs. Therefore, it is desirable to have SFs' IRQ information available
 at the bus/device level.
 
 To overcome the above limitations, this short series extends the
 auxiliary bus to display IRQ information in sysfs, similar to that of
 PFs and VFs.
 
 It adds an 'irqs' directory under the auxiliary device and includes an
 <irq_num> sysfs file within it.
 
 For example:
 $ ls /sys/bus/auxiliary/devices/mlx5_core.sf.1/irqs/
 50  51  52  53  54  55  56  57  58
 
 Patch summary:
 patch-1 adds auxiliary bus to support irqs used by auxiliary device
 patch-2 mlx5 driver using exposing irqs for PCI SF devices via auxiliary
         bus
 
 ==========
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmaQTCYACgkQSD+KveBX
 +j7nRAgAhyi8mD93AjpoXX8onbK3ZyPnGwLToCs0NT3EzT0BIwNvDovQp4rhcs16
 3zVwvW+twVsbMuPYTpPVgcynpL6N0K/CoW+ubDGZaRIaf0nDmh4MY1wY/EUsVj8R
 FbeTi5L+9MyKvFbtO5d4cW1q7M0XVD3uR8Wle6PwvXZ1gcM59vsR1eml25NLTC8B
 Z9F9WKG+dFAni0ll/IL837Se3QQapRXtJQ3g6XbIcpXiMqgIrHZ9FyY0LvuWlQq4
 LsIPKh7RySATmAYXwwpsnfdrilvvMHsyjlAoeNHEJBsAUY+kpOIFFi6J5EB+/oyo
 jhBhlc4Al0vUXis9jGTysO7mVYVOUQ==
 =DTxS
 -----END PGP SIGNATURE-----

Merge tag 'aux-sysfs-irqs' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

Saeed Mahameed says:

====================
aux-sysfs-irqs

Shay Says:
==========
Introduce auxiliary bus IRQs sysfs

Today, PCI PFs and VFs, which are anchored on the PCI bus, display their
IRQ information in the <pci_device>/msi_irqs/<irq_num> sysfs files.  PCI
subfunctions (SFs) are similar to PFs and VFs and these SFs are anchored
on the auxiliary bus. However, these PCI SFs lack such IRQ information
on the auxiliary bus, leaving users without visibility into which IRQs
are used by the SFs. This absence makes it impossible to debug
situations and to understand the source of interrupts/SFs for
performance tuning and debug.

Additionally, the SFs are multifunctional devices supporting RDMA,
network devices, clocks, and more, similar to their peer PCI PFs and
VFs. Therefore, it is desirable to have SFs' IRQ information available
at the bus/device level.

To overcome the above limitations, this short series extends the
auxiliary bus to display IRQ information in sysfs, similar to that of
PFs and VFs.

It adds an 'irqs' directory under the auxiliary device and includes an
<irq_num> sysfs file within it.

For example:
$ ls /sys/bus/auxiliary/devices/mlx5_core.sf.1/irqs/
50  51  52  53  54  55  56  57  58

Patch summary:
patch-1 adds auxiliary bus to support irqs used by auxiliary device
patch-2 mlx5 driver using exposing irqs for PCI SF devices via auxiliary
        bus
==========

* tag 'aux-sysfs-irqs' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
  net/mlx5: Expose SFs IRQs
  driver core: auxiliary bus: show auxiliary device IRQs
  RDMA/mlx5: Add Qcounters req_transport_retries_exceeded/req_rnr_retries_exceeded
  net/mlx5: Reimplement write combining test
====================

Link: https://patch.msgid.link/20240711213140.256997-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2024-07-15 12:42:45 -07:00
Linus Torvalds
98f3a9a4fd vfs-6.11.pidfs 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZpEHIgAKCRCRxhvAZXjc
 ovTvAQDvxpq1CIJz4arkf6lkI1VX1PcSfyV1+aIsXkrGF01tfwD+PekJH0xJ7RqU
 ysuMo1uG3i1OO2xIdrdwCXJDng4QggE=
 =LtRf
 -----END PGP SIGNATURE-----

Merge tag 'vfs-6.11.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull pidfs updates from Christian Brauner:
 "This contains work to make it possible to derive namespace file
  descriptors from pidfd file descriptors.

  Right now it is already possible to use a pidfd with setns() to
  atomically change multiple namespaces at the same time. In other
  words, it is possible to switch to the namespace context of a process
  using a pidfd. There is no need to first open namespace file
  descriptors via procfs.

  The work included here is an extension of these abilities by allowing
  to open namespace file descriptors using a pidfd. This means it is now
  possible to interact with namespaces without ever touching procfs.

  To this end a new set of ioctls() on pidfds is introduced covering all
  supported namespace types"

* tag 'vfs-6.11.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  pidfs: allow retrieval of namespace file descriptors
  nsfs: add open_namespace()
  nsproxy: add helper to go from arbitrary namespace to ns_common
  nsproxy: add a cleanup helper for nsproxy
  file: add take_fd() cleanup helper
 2024-07-15 12:34:01 -07:00
Linus Torvalds
1b074abe88 vfs-6.11.nsfs 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZpEHFAAKCRCRxhvAZXjc
 olb9AQDsA6PLSHsRIVGO3E+syvL+lXC21QdsbAkSgADbqbSC5wEA+nfG2adiWKXc
 8CKGMrqXb3j75UfIRIHnM6D03wm0ywo=
 =ybN0
 -----END PGP SIGNATURE-----

Merge tag 'vfs-6.11.nsfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull namespace-fs updates from Christian Brauner:
 "This adds ioctls allowing to translate PIDs between PID namespaces.

  The motivating use-case comes from LXCFS which is a tiny fuse
  filesystem used to virtualize various aspects of procfs. LXCFS is run
  on the host. The files and directories it creates can be bind-mounted
  by e.g. a container at startup and mounted over the various procfs
  files the container wishes to have virtualized.

  When e.g. a read request for uptime is received, LXCFS will receive
  the pid of the reader. In order to virtualize the corresponding read,
  LXCFS needs to know the pid of the init process of the reader's pid
  namespace.

  In order to do this, LXCFS first needs to fork() two helper processes.
  The first helper process setns() to the readers pid namespace. The
  second helper process is needed to create a process that is a proper
  member of the pid namespace.

  The second helper process then creates a ucred message with ucred.pid
  set to 1 and sends it back to LXCFS. The kernel will translate the
  ucred.pid field to the corresponding pid number in LXCFS's pid
  namespace. This way LXCFS can learn the init pid number of the
  reader's pid namespace and can go on to virtualize.

  Since these two forks() are costly LXCFS maintains an init pid cache
  that caches a given pid for a fixed amount of time. The cache is
  pruned during new read requests. However, even with the cache the hit
  of the two forks() is singificant when a very large number of
  containers are running.

  So this adds a simple set of ioctls that let's a caller translate PIDs
  from and into a given PID namespace. This significantly improves
  performance with a very simple change.

  To protect against races pidfds can be used to check whether the
  process is still valid"

* tag 'vfs-6.11.nsfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  nsfs: add pid translation ioctls
 2024-07-15 12:27:39 -07:00
Linus Torvalds
f608cabaed vfs-6.11.mount 
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZpEHCgAKCRCRxhvAZXjc
 om+gAQCC4nJqJqs9bJZIItRtZ71GnxZQO3HVohhIlNM2KKh0VgEA47JhD0O0Srfb
 CleII4cQWqB32BfB/vMeff6hpNa7SA4=
 =7ltk
 -----END PGP SIGNATURE-----

Merge tag 'vfs-6.11.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull vfs mount query updates from Christian Brauner:
 "This contains work to extend the abilities of listmount() and
  statmount() and various fixes and cleanups.

  Features:

   - Allow iterating through mounts via listmount() from newest to
     oldest. This makes it possible for mount(8) to keep iterating the
     mount table in reverse order so it gets newest mounts first.

   - Relax permissions on listmount() and statmount().

     It's not necessary to have capabilities in the initial namespace:
     it is sufficient to have capabilities in the owning namespace of
     the mount namespace we're located in to list unreachable mounts in
     that namespace.

   - Extend both listmount() and statmount() to list and stat mounts in
     foreign mount namespaces.

     Currently the only way to iterate over mount entries in mount
     namespaces that aren't in the caller's mount namespace is by
     crawling through /proc in order to find /proc/<pid>/mountinfo for
     the relevant mount namespace.

     This is both very clumsy and hugely inefficient. So extend struct
     mnt_id_req with a new member that allows to specify the mount
     namespace id of the mount namespace we want to look at.

     Luckily internally we already have most of the infrastructure for
     this so we just need to expose it to userspace. Give userspace a
     way to retrieve the id of a mount namespace via statmount() and
     through a new nsfs ioctl() on mount namespace file descriptor.

     This comes with appropriate selftests.

   - Expose mount options through statmount().

     Currently if userspace wants to get mount options for a mount and
     with statmount(), they still have to open /proc/<pid>/mountinfo to
     parse mount options. Simply the information through statmount()
     directly.

     Afterwards it's possible to only rely on statmount() and
     listmount() to retrieve all and more information than
     /proc/<pid>/mountinfo provides.

     This comes with appropriate selftests.

  Fixes:

   - Avoid copying to userspace under the namespace semaphore in
     listmount.

  Cleanups:

   - Simplify the error handling in listmount by relying on our newly
     added cleanup infrastructure.

   - Refuse invalid mount ids early for both listmount and statmount"

* tag 'vfs-6.11.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: reject invalid last mount id early
  fs: refuse mnt id requests with invalid ids early
  fs: find rootfs mount of the mount namespace
  fs: only copy to userspace on success in listmount()
  sefltests: extend the statmount test for mount options
  fs: use guard for namespace_sem in statmount()
  fs: export mount options via statmount()
  fs: rename show_mnt_opts -> show_vfsmnt_opts
  selftests: add a test for the foreign mnt ns extensions
  fs: add an ioctl to get the mnt ns id from nsfs
  fs: Allow statmount() in foreign mount namespace
  fs: Allow listmount() in foreign mount namespace
  fs: export the mount ns id via statmount
  fs: keep an index of current mount namespaces
  fs: relax permissions for statmount()
  listmount: allow listing in reverse order
  fs: relax permissions for listmount()
  fs: simplify error handling
  fs: don't copy to userspace under namespace semaphore
  path: add cleanup helper
 2024-07-15 11:54:04 -07:00
Rafael J. Wysocki
281cfec53b Merge branch 'thermal-intel' 
Merge updates of Intel thermal drivers for 6.11-rc1:

 - Switch Intel thermal drivers to new Intel CPU model defines (Tony
   Luck).

 - Clean up the int3400 and int3403 drivers (Erick Archer and David Alan
   Gilbert).

 - Improve intel_pch_thermal kernel log messages printed during suspend
   to idle (Zhang Rui).

 - Make the intel_tcc_cooling driver use a model-specific bitmask for
   TCC offset (Ricardo Neri).

 - Add DLVR and MSI interrupt support for the Lunar Lake platform to the
   int340x thermal driver (Srinivas Pandruvada).

 - Enable workload type hints (WLT) support and power floor interrupt
   support for the Lunar Lake platform in int340x ((Srinivas Pandruvada).

 - Make the HFI thermal driver use package scope for HFI instances as
   per the Intel SDM (Zhang Rui).

* thermal-intel:
  thermal: intel: hfi: Give HFI instances package scope
  thermal: intel: int340x: Enable WLT and power floor support for Lunar Lake
  thermal: intel: int340x: Support MSI interrupt for Lunar Lake
  thermal: intel: int340x: Remove unnecessary calls to free irq
  thermal: intel: int340x: Add DLVR support for Lunar Lake
  thermal: intel: int340x: Capability to map user space to firmware values
  thermal: intel: int340x: Cleanup of DLVR sysfs on driver remove
  thermal: intel: intel_tcc_cooling: Use a model-specific bitmask for TCC offset
  thermal: intel: intel_tcc: Add model checks for temperature registers
  thermal: intel: intel_pch: Improve cooling log
  thermal: int3403: remove unused struct 'int3403_performance_state'
  thermal: int3400: Use sizeof(*pointer) instead of sizeof(type)
  thermal: intel: intel_soc_dts_thermal: Switch to new Intel CPU model defines
  thermal: intel: intel_tcc_cooling: Switch to new Intel CPU model defines
 2024-07-15 20:44:31 +02:00
Rafael J. Wysocki
ab33da3a22 Merge branch 'thermal-core' 
Merge updates related to the thermal core for 6.11-rc1:

 - Redesign the .set_trip_temp() thermal zone callback to take a trip
   pointer instead of a trip ID and update its users (Rafael Wysocki).

 - Avoid using invalid combinations of polling_delay and passive_delay
   thermal zone parameters (Rafael Wysocki).

 - Update a cooling device registration function to take a const
   argument (Krzysztof Kozlowski).

 - Make the uniphier thermal driver use thermal_zone_for_each_trip() for
   walking trip points (Rafael Wysocki).

* thermal-core:
  thermal: core: Add sanity checks for polling_delay and passive_delay
  thermal: trip: Fold __thermal_zone_get_trip() into its caller
  thermal: trip: Pass trip pointer to .set_trip_temp() thermal zone callback
  thermal: imx: Drop critical trip check from imx_set_trip_temp()
  thermal: trip: Add conversion macros for thermal trip priv field
  thermal: helpers: Introduce thermal_trip_is_bound_to_cdev()
  thermal: core: Change passive_delay and polling_delay data type
  thermal: core: constify 'type' in devm_thermal_of_cooling_device_register()
  thermal: uniphier: Use thermal_zone_for_each_trip() for walking trip points
 2024-07-15 20:43:21 +02:00