Commit graph

271,764 commits

Author SHA1 Message Date
Ville Syrjälä
4e3d1e26c2 drm/i915: Pass hpd_status_i915[] to intel_get_hpd_pins() in pre-g4x
Pass the correct hpd[] array to intel_get_hpd_pins() on pre-g4x
platforms.

This got broken in the following commit:
commit fd63e2a972
Author: Imre Deak <imre.deak@intel.com>
Date:   Tue Jul 21 15:32:44 2015 -0700

    drm/i915: combine i9xx_get_hpd_pins and pch_get_hpd_pins

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Egbert Eich <eich@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-02 16:33:54 +03:00
Chris Wilson
51bc140431 drm/i915: Always mark the object as dirty when used by the GPU
There have been many hard to track down bugs whereby userspace forgot to
flag a write buffer and then cause graphics corruption or a hung GPU
when that buffer was later purged under memory pressure (as the buffer
appeared clean, its pages would have been evicted rather than preserved
and any changes more recent than in the backing storage would be lost).
In retrospect this is a rare optimisation against memory pressure,
already the slow path. If we always mark the buffer as dirty when
accessed by the GPU, anything not used can still be evicted cheaply
(ideal behaviour for mark-and-sweep eviction) but we do not run the risk
of corruption. For correct read serialisation, userspace still has to
notify when the GPU writes to an object. However, there are certain
situations under which userspace may wish to tell white lies to the
kernel...

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: "Goel, Akash" <akash.goel@intel.co>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-02 16:21:53 +03:00
Ander Conselvan de Oliveira
6fa2d19793 i915: Set ddi_pll_sel in DP MST path
The DP MST encoder config function never sets ddi_pll_sel, even though
its value is programmed in its ->pre_enable() hook. That used to work
because a new pipe_config was kzalloc'ed at every modeset, and the value
of zero selects the highest clock for the PLL. Starting with the commit
below, the value of ddi_pll_sel is preserved through modesets, and since
the correct value wasn't properly setup by the MST code, it could lead
to warnings and blank screens.

commit 8504c74c7a
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date:   Fri May 15 11:51:50 2015 +0300

    drm/i915: Preserve ddi_pll_sel when allocating new pipe_config

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91628
Cc: stable@vger.kernel.org # 7e6313a251 drm/i915: Don't use link_bw for PLL setup
Cc: stable@vger.kernel.org
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-01 12:42:27 +03:00
Ville Syrjälä
7e6313a251 drm/i915: Don't use link_bw for PLL setup
Use port_clock instead of link_bw when picking the PLL parameters for
DP. link_bw may be zero with an eDP 1.4 sink that supports
DP_LINK_RATE_SET so we shouldn't use it for anything other than feed it
to the sink appropriately.

v2: Fix typo in commit message (Sivakumar)

Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[Jani: cherry-picked from future.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-01 12:31:44 +03:00
Lukas Wunner
69f92f67b6 drm/i915: Preserve SSC earlier
Commit 92122789b2 ("drm/i915: preserve SSC if previously set v3")
added code to intel_modeset_gem_init to override the SSC status read
from VBT with the SSC status set by BIOS.

However, intel_modeset_gem_init is invoked *after* intel_modeset_init,
which calls intel_setup_outputs, which *modifies* SSC status by way of
intel_init_pch_refclk. So unlike advertised, intel_modeset_gem_init
doesn't preserve the SSC status set by BIOS but whatever
intel_init_pch_refclk decided on.

This is a problem on dual gpu laptops such as the MacBook Pro which
require either a handler to switch DDC lines, or the discrete gpu
to proxy DDC/AUX communication: Both the handler and the discrete
gpu may initialize after the i915 driver, and consequently, an LVDS
connector may initially seem disconnected and the SSC therefore
is disabled by intel_init_pch_refclk, but on reprobe the connector
may turn out to be connected and the SSC must then be enabled.

Due to 92122789b2 however, the SSC is not enabled on reprobe since
it is assumed BIOS disabled it while in fact it was disabled by
intel_init_pch_refclk.

Also, because the SSC status is preserved so late, the preserved value
only ever gets used on resume but not on panel initialization:
intel_modeset_init calls intel_init_display which indirectly calls
intel_panel_use_ssc via multiple subroutines, *before* the BIOS value
overrides the VBT value in intel_modeset_gem_init (intel_panel_use_ssc
is the sole user of dev_priv->vbt.lvds_use_ssc).

Fix this by moving the code introduced by 92122789b2 from
intel_modeset_gem_init to intel_modeset_init before the invocation
of intel_setup_outputs and intel_init_display.

Add a DRM_DEBUG_KMS as suggested way back by Jani:
http://lists.freedesktop.org/archives/intel-gfx/2014-June/046666.html

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Paul Hordiienko <pvt.gord@gmail.com>
    [MBP  6,2 2010  intel ILK + nvidia GT216  pre-retina]
Tested-by: William Brown <william@blackhats.net.au>
    [MBP  8,2 2011  intel SNB + amd turks     pre-retina]
Tested-by: Lukas Wunner <lukas@wunner.de>
    [MBP  9,1 2012  intel IVB + nvidia GK107  pre-retina]
Tested-by: Bruno Bierbaumer <bruno@bierbaumer.net>
    [MBP 11,3 2013  intel HSW + nvidia GK107  retina -- work in progress]
Fixes: 92122789b2 ("drm/i915: preserve SSC if previously set v3")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-01 09:38:49 +03:00
Xiong Zhang
d8e19f99d3 drm/i915/skl: Adding DDI_E power well domain
From B spec, DDI_E port belong to PowerWell 2, but
DDI_E share the powerwell_req/staus register bit with
DDI_A which belong to DDI_A_E_POWER_WELL.

In order to communicate with the connector on DDI-E, both
DDI_A_E_POWER_WELL and POWER_WELL_2 must be enabled.

Currently intel_dp_power_get(DDI_E) only enable
DDI_A_E_POWER_WELL, this patch will not only enable
DDI_a_E_POWER_WELL but also enable POWER_WELL_2.

This patch also fix the DDI-E hotplug function.

Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-31 18:40:48 +03:00
Rodrigo Vivi
477ec3283c drm/i915: eDP can be present on DDI-E
Enable eDP on DDI-E.

Also let's remove duplicated definitions to avoid later confusion.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-31 18:36:38 +03:00
Rodrigo Vivi
2800e4c228 drm/i915/skl: Enable DDI-E
There are OEMs using DDI-E out there,
so let's enable it.

Unfortunately there is no detection bit for DDI-E
So we need to rely on VBT for that.

I also need to give credits to Xiong since before seing
his approach to check info->support_* I was creating an ugly
vbt->ddie_sfuse_strap in order to propagate the ddi presence info

v2: Rebased as last patch in the series. since all other patches
in this series are needed for anything working propperly on DDI-E.

Credits-to: "Zhang, Xiong Y" <xiong.y.zhang@intel.com>
Cc: "Zhang, Xiong Y" <xiong.y.zhang@intel.com>
Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-31 18:28:09 +03:00
Xiong Zhang
11c1b657c4 drm/i915: Enable HDMI on DDI-E
DDI-E doesn't have the correspondent GMBUS pin.

We rely on VBT to tell us which one it being used instead.

The DVI/HDMI on shared port couldn't exist.

This patch isn't tested without hardware wchich has HDMI
on DDI-E.

v2: fix trailing whitespace
v3: MISSING_CASE take place of BUG()

Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-31 18:27:02 +03:00
Imre Deak
54875571bb drm/i915: apply the PCI_D0/D3 hibernation workaround everywhere on pre GEN6
commit da2bc1b9db
Author: Imre Deak <imre.deak@intel.com>
Date:   Thu Oct 23 19:23:26 2014 +0300

    drm/i915: add poweroff_late handler

introduced a regression on old platforms during hibernation. A workaround was
added in

commit ab3be73fa7
Author: Imre Deak <imre.deak@intel.com>
Date:   Mon Mar 2 13:04:41 2015 +0200

    drm/i915: gen4: work around hang during hibernation

using an explicit blacklist for the GENs/BIOS vendors where the issue was
reported. Later there we had reports of the same failure on platforms not on
this list.

To my best knowledge the correct thing to do is still to put the device to PCI
D3 state during hibernation, see [1] and [2] for the reasons. This also aligns
with our future plans to unify more the runtime and system suspend/resume
paths. Since an exact blacklist seems to be impractical (multiple GENs and
BIOS vendors are affected) apply the workaround on everything pre GEN6.

[1] http://lists.freedesktop.org/archives/intel-gfx/2015-February/060710.html
[2] https://lkml.org/lkml/2015/6/22/274

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95061
Reported-by: Ilya Tumaykin <itumaykin@gmail.com>
Reported-by: Dirk Griesbach <spamthis@freenet.de>
Reported-by: Pavel Machek <pavel@ucw.cz>
Reported-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Tested-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
CC: stable@vger.kernel.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-31 18:18:51 +03:00
Ville Syrjälä
d14e7b6d1d drm/i915: Check DP link status on long hpd too
We are no longer checkling the DP link status on long hpd. We used to do
that from the .hot_plug() handler, but it was removed when MST got
introduced.

If there's no userspace we now fail to retrain the link if the sink
power is toggled (or cable yanked and replugged), meaning the user is
left staring at a blank screen. With the retraining put back that should
be fixed.

Also remove the leftover comment that referred to the old retraining
from .hot_plug().

Fixes a regression introduced in:
commit 0e32b39cee
Author: Dave Airlie <airlied@redhat.com>
Date:   Fri May 2 14:02:48 2014 +1000

    drm/i915: add DP 1.2 MST support (v0.7)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89453
Tested-by: Palmer Dabbelt <palmer@dabbelt.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91407
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89461
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89594
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85641
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-31 18:16:43 +03:00
Gary Wang
39d9b85a4d drm/i915: set CDCLK if DPLL0 enabled during resuming from S3
Since BIOS RC 1.4 it would enable CDCLK PLL during BIOS S3 resume, then
driver needs to set CDCLK to avoid display corruption if DPLL0 enabled.

References: https://bugs.freedesktop.org/show_bug.cgi?id=91697
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Cooper Chiou <cooper.chiou@intel.com>
Reviewed-by: Wei Shun Chang <wei.shun.chang@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gavin Hindman <gavin.hindman@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Xiong Y Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Gary Wang <gary.c.wang@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-28 20:32:02 +03:00
Xiong Zhang
26951caf55 drm/i915/skl: enable DDI-E hotplug
v2: fix one error found by checkpath.pl
v3: Add one ignored break for switch-case. DDI-E hotplug
    function doesn't work after updating drm-intel tree,
    I checked the code and found this missing which isn't
    the root cause for broke DDI-E hp.  The broken
    DDI-E hp function is fixed by "Adding DDI_E power
    well domain".

Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Timo Aaltonen <timo.aaltonen@canonical.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-26 10:24:25 +03:00
Thierry Reding
8e9d597a37 drm/i915: Fix build warning on 32-bit
The gtt.stolen_size field is of type size_t, and so should be printed
using %zu to avoid build warnings on either 32-bit and 64-bit builds.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-26 10:15:36 +03:00
Rodrigo Vivi
5f8b253147 drm/i915/skl: Update DDI buffer translation programming.
SKL-Y can now use the same programming for all VccIO values after an
adjustment to I_boost.  SKL-U DP table adjustments.

1. Remove SKL Y 0.95V from "SKL H and S" columns in all tables. The
   other SKL Y column removes the "0.85V VccIO" so it now applies to all
   voltages.

2. DP table changes SKL U 400mV+0db dword 0 value from 2016h to 201Bh.

3. DP table changes SKL U 600mv+0db dword 0 value from 2016h to 201Bh.

4. DP table increases I_boost to level 3 for SKL Y 400mv+9.5db.

v2: Fix compilation warnings as pointed by Paulo.

Reference: Graphics Spec Change r97962
Cc: Arthur Runyan <arthur.j.runyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[Jani: reformatted commit message for shorter lines.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-26 09:55:48 +03:00
David Weinehall
e2d6cf7f36 drm/i915: Allow parsing of variable size child device entries from VBT
VBT version 196 increased the size of common_child_dev_config. The
parser code assumed that the size of this structure would not change.

The modified code now copies the amount needed based on the VBT version,
and emits a debug message if the VBT version is unknown (too new); since
the struct config block won't shrink in newer versions it should be
harmless to copy the maximum known size in such cases, so that's what we
do, but emitting the warning is probably sensible anyway.

In the longer run it might make sense to modify the parser code to use a
version/feature mapping, rather than hardcoding things like this, but
for now the variants are fairly manageable.

This fixes a regression introduced in

commit 75067ddecf
Author: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Date:   Fri Jul 10 14:10:55 2015 +0300

    drm/i915: Per-DDI I_boost override

since that commit changed the child device config size without updating
the checks and memcpy.

v2: Stricter size checks

v3 by Jani:
- Keep the checks strict, and warnigns verbose, but keep going anyway.
- Take care to copy the max amount of child device config we can.
- Fix the messages.

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-24 10:34:09 +03:00
Thulasimani,Sivakumar
af7080f555 drm/i915: fix link rates reported for SKL
This patch fixes the bug that SKL SKUs before B0 might return
HBR2 as supported even though it is not supposed to be enabled
on such platforms.

v2: optimize if else condition (Jani)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
[Jani: minor whitespace fix.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-24 10:17:51 +03:00
Jani Nikula
6cc38acaaa drm/i915: fix VBT parsing for SDVO child device mapping
commit 75067ddecf
Author: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Date:   Fri Jul 10 14:10:55 2015 +0300

    drm/i915: Per-DDI I_boost override

increased size of union child_device_config without taking into account
the size check in parse_sdvo_device_mapping(). Switch the function over
to using the legacy struct only.

Fixes: 75067ddecf ("drm/i915: Per-DDI I_boost override")
Cc: Antti Koskipaa <antti.koskipaa@linux.intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-24 09:56:41 +03:00
Dave Airlie
3732ce72b4 Linux 4.2-rc8
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJV2pUkAAoJEHm+PkMAQRiGCIoH/Rb29ZjdCoZJp9OtnjAG+qRc
 bG3YuomIdib86x7xHRKKaLWBa7din7IYjuwT/X4S4duO5a1R5Lp1sRG3IlGfhT0W
 nBNbjFl4q4bOyiTPtTRTYyh4g5UQv4IuyCnCmZyCTJyVi/O6HVM9TWKUzm68P2dJ
 30LwLUcQJ+mHueGJwFBAXe2BaojEpvYCdSX6tvbrQ/8X3FrVExZXuJl4uMYNFYNK
 ZwG/v5t7tYOiAe76JGbrEuVFPZWLPEW7amHOWR0T4Ye4nWTlBgx7fENiNRlfgcvI
 CM16l/xkyrZQ3Q5jZy1qYDfdHYF++dyEDysX4w1ae/X0aaLZn7l+u5VQD6WpkQQ=
 =IF6I
 -----END PGP SIGNATURE-----

Merge tag 'v4.2-rc8' into drm-next

Linux 4.2-rc8

Backmerge required for Intel so they can fix their -next tree up properly.
2015-08-24 16:36:42 +10:00
Mathieu Larouche
e829d7ef9f drm/mgag200: Add support for a new rev of G200e
- Added PLL algorithm for a new rev of G200e
- Removed the bandwidth limitation for the new G200e

Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-08-24 13:47:16 +10:00
Mathieu Larouche
6d857c18ae drm/mgag200: Add support for a new G200eW3 chipset
- Added support for the new deviceID for G200eW3
- Added PLL algorithm for the G200eW3
- Added some initialization code for G200eW3

Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-08-24 13:46:52 +10:00
Linus Torvalds
d683477020 SCSI fixes on 20150823
A couple of major (hang and deadlock) fixes with fortunately fairly rare
 triggering conditions.  The PM oops is only really triggered by people using
 enclosure services (rare) and the fnic driver is mostly used in enterprise
 environments.
 
 Signed-off-by: James Bottomley <JBottomley@Odin.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJV2e34AAoJEDeqqVYsXL0MywIH/0ZzZzofgUammzkjalMxoW1b
 rojSyB1bpuADc8eXpqsw1x6coNxKK85e9aAmplXqdykgazw44lzkH43Vez7gbwGN
 JG5+utu2hQUMJYF9bQ3NLPu5JgxgP0w6aqY1L1ZndKFrRmEnM53UcojNT3M2NIN3
 cgA5ICDD0RSQy24KDSZaN+y3SvopEcY5eXUcLfshrwXI3yAIH4G39z8hQHCFGHZB
 BkYq9qjI5T4P7PRE5trRYu7B9rO8IJpoYdPnmI3i49jIyJlpFXP3FlLSmL+gCzyO
 FBhdln9sCulCWnTirRf7Gsbq6LfXpihtzzgfCtPoxxwI4PRcIBh0jxu3Od8o9NY=
 =jY8K
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "A couple of major (hang and deadlock) fixes with fortunately fairly
  rare triggering conditions.  The PM oops is only really triggered by
  people using enclosure services (rare) and the fnic driver is mostly
  used in enterprise environments"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  SCSI: Fix NULL pointer dereference in runtime PM
  fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack
2015-08-23 20:46:22 -07:00
Linus Torvalds
eb63b34bdf Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS bug fixes from Ralf Baechle:
 "Two more fixes for 4.2.

  One fixes a build issue with the LLVM assembler - LLVM assembler macro
  names are case sensitive, GNU as macro names are insensitive; the
  other corrects a license string (GPL v2, not GPLv2) such that the
  module loader will recognice the license correctly"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  FIRMWARE: bcm47xx_nvram: Fix module license.
  MIPS: Fix LLVM build issue.
2015-08-23 07:23:09 -07:00
Linus Torvalds
84f3fe4608 Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
 "A series of small fixlets for a regression visible on OMAP devices
  caused by the conversion of the OMAP interrupt chips to hierarchical
  interrupt domains.  Mostly one liners on the driver side plus a small
  helper function in the core to avoid open coded mess in the drivers"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/crossbar: Restore set_wake functionality
  irqchip/crossbar: Restore the mask on suspend behaviour
  ARM: OMAP: wakeupgen: Restore the irq_set_type() mechanism
  irqchip/crossbar: Restore the irq_set_type() mechanism
  genirq: Introduce irq_chip_set_type_parent() helper
  genirq: Don't return ENOSYS in irq_chip_retrigger_hierarchy
2015-08-22 07:45:36 -07:00
Linus Torvalds
f8a89fc05a Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
 "Two minimalistic fixes for 4.2 regressions:

   - Eric fixed a thinko in the timer_list base switching code caused by
     the overhaul of the timer wheel.  It can cause a cpu to see the
     wrong base for a timer while we move the timer around.

   - Guenter fixed a regression for IMX if booted w/o device tree, where
     the timer interrupt is not initialized and therefor the machine
     fails to boot"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/imx: Fix boot with non-DT systems
  timer: Write timer->flags atomically
2015-08-22 07:37:41 -07:00
Michal Hocko
2f064f3485 mm: make page pfmemalloc check more robust
Commit c48a11c7ad ("netvm: propagate page->pfmemalloc to skb") added
checks for page->pfmemalloc to __skb_fill_page_desc():

        if (page->pfmemalloc && !page->mapping)
                skb->pfmemalloc = true;

It assumes page->mapping == NULL implies that page->pfmemalloc can be
trusted.  However, __delete_from_page_cache() can set set page->mapping
to NULL and leave page->index value alone.  Due to being in union, a
non-zero page->index will be interpreted as true page->pfmemalloc.

So the assumption is invalid if the networking code can see such a page.
And it seems it can.  We have encountered this with a NFS over loopback
setup when such a page is attached to a new skbuf.  There is no copying
going on in this case so the page confuses __skb_fill_page_desc which
interprets the index as pfmemalloc flag and the network stack drops
packets that have been allocated using the reserves unless they are to
be queued on sockets handling the swapping which is the case here and
that leads to hangs when the nfs client waits for a response from the
server which has been dropped and thus never arrive.

The struct page is already heavily packed so rather than finding another
hole to put it in, let's do a trick instead.  We can reuse the index
again but define it to an impossible value (-1UL).  This is the page
index so it should never see the value that large.  Replace all direct
users of page->pfmemalloc by page_is_pfmemalloc which will hide this
nastiness from unspoiled eyes.

The information will get lost if somebody wants to use page->index
obviously but that was the case before and the original code expected
that the information should be persisted somewhere else if that is
really needed (e.g.  what SLAB and SLUB do).

[akpm@linux-foundation.org: fix blooper in slub]
Fixes: c48a11c7ad ("netvm: propagate page->pfmemalloc to skb")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Debugged-by: Vlastimil Babka <vbabka@suse.com>
Debugged-by: Jiri Bohac <jbohac@suse.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>	[3.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-21 14:30:10 -07:00
Linus Torvalds
e45fc85a2f PCI updates for v4.2:
Resource management
     - Don't use 64-bit bus addresses on PA-RISC
 
   Miscellaneous
     - Tolerate hierarchies with no Root Port
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV11jCAAoJEFmIoMA60/r8CPMP/2rzzsUmqc/euc3J3qMrNsgx
 E8BzZlbugoWxu9ymHIYqAxSr0RsU5ipmC+1G8RlEhyXxax3rawBQ+VQytl8CbyFM
 9HsOlP69f0pMC+r5thbMUwbfPZfIlf6X90QXhojhdf/DppVksh3S3nsEB8OBqqe9
 aNY++jAyEakGMtxtezl21Ry+yx9/tCGY7/zggb+KY6/D2glntaFBpfUw3kKuE6yu
 A1W6DjZZjcUaN4lfXsIMGbghd+1EyNqxZ8a1e7mA2ux3DXr+2RFxLhdWfsKLtqH+
 QG6QuUnF/xEIbyOgSmCSCdJSJnRwE3IfF0CCzU/8T3vi2zwuK5iBKfoBmPQnmOoB
 C5PsPUnd+pU9xVdz1vJrFfP5u5GaDgrwC0V34qn7x4s4w45bIDjfyvJguuifgHaO
 SsLSN2cwLlfn9QqY+hLkQzRoHZh2YnRMPsRbpy6qSI3ekUVVvU9Z73RQpkqzmAgg
 8s+OIQafuvEcEDeNOs+CRXQnPgr/wzS7W/20CVr6MpY6Zot6U31D93cM+AT/521b
 na8+1ypVTcWxuRq3hFwxXiKQY4Jh4WhNyIIgV7p/qeAZAd7/qq/oVZjC3hHC2Ho6
 EGgXnQKoThsiKeHjFUMc7QgATrqCbrtMafgVilaOkNoT2jF5Nsya5FbOJSTv7Hkm
 uKhFMzNw/JzsVkP+ny4C
 =Xqdv
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
 "These are fixes for ASPM-related NULL pointer dereference crashes on
  Sparc and PowerPC and 64-bit PCI address-related HPMC crashes on
  PA-RISC.  These are both caused by things we merged in the v4.2 merge
  window.  Details:

  Resource management
    - Don't use 64-bit bus addresses on PA-RISC

  Miscellaneous
    - Tolerate hierarchies with no Root Port"

* tag 'pci-v4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Don't use 64-bit bus addresses on PA-RISC
  PCI: Tolerate hierarchies with no Root Port
2015-08-21 11:18:10 -07:00
Linus Torvalds
00f7641046 media fixes for v4.2-rc8
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV11W4AAoJEAhfPr2O5OEVa1MQAIK/eQiD+HSq3ooyIrv0ZR3k
 vXn4zPYVM4CrV6pdLKti/tb2y+QQVLDBY2kSyKquJySGD+5Pg94vQr2EQ3tVx/+H
 6BK69lLUIzjqjf9SATJcgNpDW51vh3GfkSv9nmsQ1VMY8FQxX64AXPgOF2QMrlmI
 YKDVqNY43h/0uctXBiC1epfK139vogKE9P5eHW3QyqGK87ebeyB/yTQC/qF3n77e
 GO3Q8wshPWzuQUSaqinHo7bzVi+kFF6vhvDgVuLo+J6KFKEqC375GN3+Gpe+elcd
 wbaT9r498GRR7hOHKW0w0IrFEKLRzJuj4N1QGX9v338qB3zumVey7dcQzGXGQMdV
 tv56BkbJBq9s+HngZ2vjQEWdM5BSe4FGbSY8TlCtevkA+uIMj1SBaLv4rw5DfTkD
 lA5ijux1xVjqORVxo7yIbJal1nP2FPvzKRRsKn5C/2OHFgt6SX8bTjuiC4JrsfIM
 P6GIM5P7aLth7NX/xr1B9K5GLucJ38KGw1/D9wYeZpXm1Ba1T4KjWzkq9pW5u/Z6
 xa3phHvTvxf7IcoQFEa//D27TmfctvqIxACoW8bOO1sJqX+e0dn29kfP1FmfFmCi
 zqWkSBBCnDBD16+zOozxjQFsuOTKqkjcCbxfkxxR4NjGcwF2Px+3uJY+JazK3QQq
 gCYbyN2rYAQ7hxCRPbP4
 =TqKo
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

 - a regression fix at the videobuf2 core driver

 - fix error handling at mantis probing code

 - revert the IR encode patches, as the API is not mature enough.
   So, better to postpone the changes to a latter Kernel

 - fix Kconfig breakages on some randconfig scenarios.

* tag 'media/v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] mantis: Fix error handling in mantis_dma_init()
  Revert "[media] rc: rc-ir-raw: Add scancode encoder callback"
  Revert "[media] rc: rc-ir-raw: Add Manchester encoder (phase encoder) helper"
  Revert "[media] rc: ir-rc5-decoder: Add encode capability"
  Revert "[media] rc: ir-rc6-decoder: Add encode capability"
  Revert "[media] rc: rc-core: Add support for encode_wakeup drivers"
  Revert "[media] rc: rc-loopback: Add loopback of filter scancodes"
  Revert "[media] rc: nuvoton-cir: Add support for writing wakeup samples via sysfs filter callback"
  [media] vb2: Fix compilation breakage when !CONFIG_BUG
  [media] vb2: Only requeue buffers immediately once streaming is started
  [media] media/pci/cobalt: fix Kconfig and build when SND is not enabled
  [media] media/dvb: fix ts2020.c Kconfig and build
2015-08-21 11:03:06 -07:00
Linus Torvalds
7e08117de6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer fix from Dmitry Torokhov:
 "A small fixup to gpio_keys_polled driver"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: gpio_keys_polled - request GPIO pin as input.
2015-08-21 10:54:53 -07:00
Linus Torvalds
dc9c12f46f Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
 "A bunch of i915 fixes, one revert a VBT fix that was a bit premature,
  and some braswell feature removal that the hw actually didn't support.

  One radeon race fix at boot, and one hlcdc build fix, one fix from
  Russell that fixes build as well with new audio features.

  This is hopefully all I have until -next"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: fix hotplug race at startup
  drm/edid: add function to help find SADs
  drm/i915: Avoid TP3 on CHV
  drm/i915: remove HBR2 from chv supported list
  Revert "drm/i915: Add eDP intermediate frequencies for CHV"
  Revert "drm/i915: Allow parsing of variable size child device entries from VBT"
  drm/atmel-hlcdc: Compile suspend/resume for PM_SLEEP only
  drm/i915: Flag the execlists context object as dirty after every use
2015-08-21 10:46:56 -07:00
Dave Airlie
7f98ca454a drm/radeon: fix hotplug race at startup
We apparantly get a hotplug irq before we've initialised
modesetting,

[drm] Loading R100 Microcode
BUG: unable to handle kernel NULL pointer dereference at   (null)
IP: [<c125f56f>] __mutex_lock_slowpath+0x23/0x91
*pde = 00000000
Oops: 0002 [#1]
Modules linked in: radeon(+) drm_kms_helper ttm drm i2c_algo_bit backlight pcspkr psmouse evdev sr_mod input_leds led_class cdrom sg parport_pc parport floppy intel_agp intel_gtt lpc_ich acpi_cpufreq processor button mfd_core agpgart uhci_hcd ehci_hcd rng_core snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm usbcore usb_common i2c_i801 i2c_core snd_timer snd soundcore thermal_sys
CPU: 0 PID: 15 Comm: kworker/0:1 Not tainted 4.2.0-rc7-00015-gbf67402 #111
Hardware name: MicroLink                               /D850MV                         , BIOS MV85010A.86A.0067.P24.0304081124 04/08/2003
Workqueue: events radeon_hotplug_work_func [radeon]
task: f6ca5900 ti: f6d3e000 task.ti: f6d3e000
EIP: 0060:[<c125f56f>] EFLAGS: 00010282 CPU: 0
EIP is at __mutex_lock_slowpath+0x23/0x91
EAX: 00000000 EBX: f5e900fc ECX: 00000000 EDX: fffffffe
ESI: f6ca5900 EDI: f5e90100 EBP: f5e90000 ESP: f6d3ff0c
 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 36f61000 CR4: 000006d0
Stack:
 f5e90100 00000000 c103c4c1 f6d2a5a0 f5e900fc f6df394c c125f162 f8b0faca
 f6d2a5a0 c138ca00 f6df394c f7395600 c1034741 00d40000 00000000 f6d2a5a0
 c138ca00 f6d2a5b8 c138ca10 c1034b58 00000001 f6d40000 f6ca5900 f6d0c940
Call Trace:
 [<c103c4c1>] ? dequeue_task_fair+0xa4/0xb7
 [<c125f162>] ? mutex_lock+0x9/0xa
 [<f8b0faca>] ? radeon_hotplug_work_func+0x17/0x57 [radeon]
 [<c1034741>] ? process_one_work+0xfc/0x194
 [<c1034b58>] ? worker_thread+0x18d/0x218
 [<c10349cb>] ? rescuer_thread+0x1d5/0x1d5
 [<c103742a>] ? kthread+0x7b/0x80
 [<c12601c0>] ? ret_from_kernel_thread+0x20/0x30
 [<c10373af>] ? init_completion+0x18/0x18
Code: 42 08 e8 8e a6 dd ff c3 57 56 53 83 ec 0c 8b 35 48 f7 37 c1 8b 10 4a 74 1a 89 c3 8d 78 04 8b 40 08 89 63

Reported-and-Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-08-21 19:43:18 +10:00
Dave Airlie
44790462d0 drm/dp/mst: dump branch OUI in debugfs (v2)
It appears some MST docks are worse than other, but the only
way to know is to see the sw revisions in here, so dump
the branch OUI so we can look at the sw revision.

v2: Thierry made me feel guilty, so I parsed the branch
OUI.

Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-08-21 12:04:49 +10:00
Dave Airlie
bef7d1961c Merge tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Revert of a VBT parsing commit that should've been queued for drm-next,
not v4.2. The revert unbreaks Braswell among other things.

Also on Braswell removal of DP HBR2/TP3 and intermediate eDP frequency
support. The code was optimistically added based on incorrect
documentation; the platform does not support them. These are cc: stable.

Finally a gpu state fix from Chris, also cc: stable.

* tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Avoid TP3 on CHV
  drm/i915: remove HBR2 from chv supported list
  Revert "drm/i915: Add eDP intermediate frequencies for CHV"
  Revert "drm/i915: Allow parsing of variable size child device entries from VBT"
  drm/i915: Flag the execlists context object as dirty after every use
2015-08-21 10:44:03 +10:00
Linus Torvalds
0bad90985d Power management and ACPI fixes for v4.2-rc8
- Fix a recently introduced issue in the ACPI backlight code which
    causes lockdep to complain about a circular lock dependency during
    initialization (Hans de Goede).
 
  - Fix a possible memory during initialization in the Exynos cpufreq
    driver (Shailendra Verma).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJV1lUAAAoJEILEb/54YlRxLcsQAK/pVtaXe07xY0WnknKQp5cr
 HqOKZKQ5Eq+1eAI8CoT27F5/DMBTCOga04arSlQo+NG+uWA+vEAXdLN0JtgqTwmU
 0C9KaTCI7vs0estYeHhz3h1+CNkP2iEG78JxlnZRuZo0plBbYtv8VPh0/gfseC/g
 BlTMM3KuSfIbUK1pWAVz8gTOJqJ/kPTTaTRjzy9/+HnQWcomz1kQnlqEjxxNK/BS
 moFi5ka+LiLvzfSc4OLjxHAL3O3pUVIKEOUv8Pkomx+Js4+9TYzLmBqjUCUN0kSJ
 y6VKqjDq4MeujPfW35PVkb3eFwILVik+8IUwQoymKobenb1lQyeGPrNvr9cCswAd
 WtBUvD/LIOdplrlFDQCeWEfb53SIr+5pOBDY4Pb+wrplg/HukmBLfORYYqtNWftM
 6Dx7mjxUoz7BddRciqTYiEgBzTE+oDgUPrQkX3ot2xXv6jbBPazzzc1EEh/25rZ1
 SYezK1JxS8xa5ctGUEy4ppgXqqNjXNotb4sQnhYSsuFjMNzs4eIj5Pp204Ohkd/S
 TJfzTD45FE6CQwkp0Yvh3/VRScUiC1xxLy/1uJvv9ZKZNpVQEJcaoPeF+DOMKFjf
 gFNToHr7SlhJq4Ad2dTzwFd64BA0c3Dg4MX1/jUSkZMRPRaIjINNQ4ftJ/yLfMsA
 rnYsGj+7Xntbfm9X/bu6
 =s0Ql
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI fixes from Rafael Wysocki:
 "These fix a recent regression in the ACPI backlight code and a memory
  leak in the Exynos cpufreq driver.

  Specifics:

   - Fix a recently introduced issue in the ACPI backlight code which
     causes lockdep to complain about a circular lock dependency during
     initialization (Hans de Goede).

   - Fix a possible memory during initialization in the Exynos cpufreq
     driver (Shailendra Verma)"

* tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: exynos: Fix for memory leak in case SoC name does not match
  ACPI / video: Fix circular lock dependency issue in the video-detect code
2015-08-20 17:06:11 -07:00
Rafael J. Wysocki
b8a1171f71 Merge branches 'acpi-video' and 'cpufreq-fixes'
* acpi-video:
  ACPI / video: Fix circular lock dependency issue in the video-detect code

* cpufreq-fixes:
  cpufreq: exynos: Fix for memory leak in case SoC name does not match
2015-08-21 00:19:29 +02:00
Bjorn Helgaas
45ea2a5fed PCI: Don't use 64-bit bus addresses on PA-RISC
Meelis and Helge reported that 3a9ad0b4fd ("PCI: Add pci_bus_addr_t")
caused HPMCs on A500 and hangs on rp5470.

PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so
prior to 3a9ad0b4fd, we always used 32-bit PCI addresses.  After
3a9ad0b4fd, we do use 64-bit PCI addresses in 64-bit kernels, and
apparently there's some PA-RISC problem related to them.

Fixes: 3a9ad0b4fd ("PCI: Add pci_bus_addr_t")
Link: http://lkml.kernel.org/r/alpine.LRH.2.11.1507260929000.30065@math.ut.ee
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Based-on-idea-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
CC: stable@vger.kernel.org	# v3.19+
2015-08-20 17:16:37 -05:00
Linus Torvalds
28e55d0723 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Out of bounds array access in 802.11 minstrel code, from Adrien
    Schildknecht.

 2) Don't use skb_get() in IGMP/MLD code paths, as this makes
    pskb_may_pull() BUG.  From Linus Luessing.

 3) Fix off by one in ipv4 route dumping code, from Andy Whitcroft.

 4) Fix deadlock in reqsk_queue_unlink(), from Eric Dumazet.

 5) Fix ppp device deregistration wrt.  netns deletion, from Guillaume
    Nault.

 6) Fix deadlock when creating per-cpu ipv6 routes, from Martin KaFai
    Lau.

 7) Fix memory leak in batman-adv code, from Sven Eckelmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  batman-adv: Fix memory leak on tt add with invalid vlan
  net: phy: fix semicolon.cocci warnings
  net: qmi_wwan: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module
  be2net: avoid vxlan offloading on multichannel configs
  ipv6: Fix a potential deadlock when creating pcpu rt
  ipv6: Add rt6_make_pcpu_route()
  ipv6: Remove un-used argument from ip6_dst_alloc()
  net: phy: workaround for buggy cable detection by LAN8700 after cable plugging
  net: ethernet: micrel: fix an error code
  ppp: fix device unregistration upon netns deletion
  net: phy: fix PHY_RUNNING in phy_state_machine
  Revert "net: limit tcp/udp rmem/wmem to SOCK_{RCV,SND}BUF_MIN"
  inet: fix potential deadlock in reqsk_queue_unlink()
  gianfar: Restore link state settings after MAC reset
  ipv4: off-by-one in continuation handling in /proc/net/route
  net: fix wrong skb_get() usage / crash in IGMP/MLD parsing code
  mac80211: fix invalid read in minstrel_sort_best_tp_rates()
2015-08-20 12:32:28 -07:00
Vincent Pelletier
1ae5ddb6f8 Input: gpio_keys_polled - request GPIO pin as input.
GPIOF_IN flag was lost in:
Commit 633a21d80b4a("input: gpio_keys_polled: Add support for GPIO
descriptors").

Without this flag, legacy code path (for non-descriptor GPIO declarations)
would configure GPIO as output (0 meaning GPIOF_DIR_OUT | GPIOF_INIT_LOW).

Cc: stable@vger.kernel.org
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-20 12:07:37 -07:00
Linus Torvalds
3243f50b0c Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
 "This contains a v4.2-rc specific RCU module unload regression bug-fix,
  a long-standing iscsi-target bug-fix for duplicate target_xfer_tags
  during NOP processing from Alexei, and two more small REPORT_LUNs
  emulation related patches to make Solaris FC host LUN scanning happy
  from Roland.

  There is also one patch not included that allows target-core to limit
  the number of fabric driver SGLs per I/O request using residuals, that
  is currently required as a work-around for FC hosts which don't honor
  EVPD block-limits settings.  At this point, it will most likely become
  for-next material"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Fix handling of small allocation lengths in REPORT LUNS
  target: REPORT LUNS should return LUN 0 even for dynamic ACLs
  target/iscsi: Fix double free of a TUR followed by a solicited NOPOUT
  target: Perform RCU callback barrier before backend/fabric unload
2015-08-20 11:39:11 -07:00
Linus Torvalds
3bd8f7d87d Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal fixes from Eduardo Valentin:
 "Last minute fixes on the thermal-soc tree.  There is a fix of a long
  lasting bug in cpu cooling device, thanks for RMK for being pushing
  this"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal/cpu_cooling: update policy limits if clipped_freq < policy->max
  thermal/cpu_cooling: rename max_freq as clipped_freq in notifier
  thermal/cpu_cooling: rename cpufreq_val as clipped_freq
  thermal/cpu_cooling: convert 'switch' block to 'if' block in notifier
  thermal/cpu_cooling: quit early after updating policy
  thermal/cpu_cooling: No need to initialize max_freq to 0
  thermal: cpu_cooling: fix lockdep problems in cpu_cooling
  thermal: power_allocator: do not use devm* interfaces
2015-08-20 11:32:33 -07:00
Guenter Roeck
be3b0f9bab clocksource/imx: Fix boot with non-DT systems
Commit 6dd747825b ("ARM: imx: move timer resources into a structure")
moved initialization parameters into a data structure, but neglected to set
the irq field in that data structure for non-DT boots. This causes the system
to hang if a non-DT boot is attempted.

Fixes: 6dd747825b ("ARM: imx: move timer resources into a structure")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: http://lkml.kernel.org/r/1440066441-13930-1-git-send-email-linux@roeck-us.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20 17:22:56 +02:00
Dave Airlie
aaba64487a Merge branch 'drm-next-fsl-dcu' of https://github.com/Jianwei-Wang/linux-drm-fsl-dcu into drm-next
Merge Freescale DCU FRM driver.

* 'drm-next-fsl-dcu' of https://github.com/Jianwei-Wang/linux-drm-fsl-dcu:
  MAINTAINERS: Add Freescale DCU DRM driver maintainer
  devicetree: Add NEC to the vendor-prefix list
  drm/layerscape: Add Freescale DCU DRM driver
2015-08-20 14:11:17 +10:00
Jianwei Wang
109eee2f2a drm/layerscape: Add Freescale DCU DRM driver
This patch add support for Two Dimensional Animation and Compositing
Engine (2D-ACE) on the Freescale SoCs.

2D-ACE is a Freescale display controller. 2D-ACE describes
the functionality of the module extremely well its name is a value
that cannot be used as a token in programming languages.
Instead the valid token "DCU" is used to tag the register names and
function names.

The Display Controller Unit (DCU) module is a system master that
fetches graphics stored in internal or external memory and displays
them on a TFT LCD panel. A wide range of panel sizes is supported
and the timing of the interface signals is highly configurable.
Graphics are read directly from memory and then blended in real-time,
which allows for dynamic content creation with minimal CPU
intervention.

The features:
(1) Full RGB888 output to TFT LCD panel.
(2) Blending of each pixel using up to 4 source layers
dependent
on size of panel.
(3) Each graphic layer can be placed with one pixel resolution
in either axis.
(4) Each graphic layer support RGB565 and RGB888 direct colors
without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct
colors
with an alpha channel and YUV422 format.
(5) Each graphic layer support alpha blending with 8-bit
resolution.
This is a simplified version, only one primary plane, one
framebuffer, one crtc, one connector and one encoder for TFT
LCD panel.

Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-19 22:23:04 -04:00
Dave Airlie
d072f46544 Merge branch 'drm-atmel-hlcdc-devel' of https://github.com/bbrezillon/linux-at91 into drm-next
The following PR add support for 3 more atmel SoCs and for some missing
features (new input formats and PRIME support).

* 'drm-atmel-hlcdc-devel' of https://github.com/bbrezillon/linux-at91:
  drm: atmel-hlcdc: add support for sama5d4 SoCs
  drm: atmel-hlcdc: add support for at91sam9n12 SoC
  drm: atmel-hlcdc: add support for at91sam9x5 SoCs
  drm: atmel-hlcdc: add RGB565 and RGB444 output support
  drm: atmel-hlcdc: add the missing DRM_ATOMIC flag
  drm: atmel-hlcdc: add PRIME support
2015-08-20 10:35:29 +10:00
Dave Airlie
82bd279d0b Merge branch 'drm-atmel-hlcdc-fixes' of https://github.com/bbrezillon/linux-at91 into drm-fixes
single atmel hlcdc fix.

* 'drm-atmel-hlcdc-fixes' of https://github.com/bbrezillon/linux-at91:
  drm/atmel-hlcdc: Compile suspend/resume for PM_SLEEP only
2015-08-20 09:40:06 +10:00
Grygorii Strashko
8200fe4347 irqchip/crossbar: Restore set_wake functionality
The TI crossbar irqchip doesn't provides any facility to configure the
wakeup sources, but the conversion to hierarchical irqdomains set the
irq_set_wake callback to irq_chip_set_wake_parent. The parent chip
(OMAP wakeupgen) has no irq_set_wake function either so the call will
fail with -ENOSYS. As a result the irq_set_wake() call in the resume
path will trigger an 'Unbalanced wake disable' warning.

Before the conversion the GIC irqchip was the top level irqchip and
correctly flagged with IRQCHIP_SKIP_SET_WAKE.

Restore the correct behaviour by removing the irq_set_type callback
from the crossbar irqchip and set the IRQCHIP_SKIP_SET_WAKE flag which
lets the irq_set_irq_wake() call from the driver succeed.

[ tglx: Massaged changelog ]

Fixes: 783d31863f ('irqchip: crossbar: Convert dra7 crossbar...')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-7-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20 00:25:26 +02:00
Grygorii Strashko
4fd8f47e7e irqchip/crossbar: Restore the mask on suspend behaviour
The ARM GIC requires that all interrupts which are not used as a
wakeup source have to be masked during suspend.

The conversion of the crossbar irqchip to hierarchical irq domains
failed to mark the crossbar irqchip with the IRQCHIP_MASK_ON_SUSPEND
flag and therefor broke the suspend requirement of the GIC.

Before the conversion the flags were visible because the GIC was the
top level irqchip. After the conversion the crossbar irqchip is the
top level irq chip whose flags are evaluated in suspend_device_irq().
As the flag is not set the masking of the non-wakeup irqs is not
invoked which breaks suspend.

Add the IRQCHIP_MASK_ON_SUSPEND flag to the crossbar irqchip, so the
GIC interrupts get masked properly.

[ tglx: Massaged changelog ]

Fixes: 783d31863f ('irqchip: crossbar: Convert dra7 crossbar...')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-6-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20 00:25:25 +02:00
Grygorii Strashko
e269ec4232 irqchip/crossbar: Restore the irq_set_type() mechanism
The conversion of the crossbar irqchip to hierarchical irq domains
failed to provide a mechanism to properly set the trigger type of an
interrupt.

The crossbar irq chip itself has no mechanism and therefor no
irq_set_type() callback. The code before the conversion relayed the
trigger configuration directly to the underlying GIC.

Restore the correct behaviour by setting the crossbar irq_set_type
callback to irq_chip_set_type_parent(). This propagates the
set_trigger() call to the underlying GIC irqchip.

[ tglx: Massaged changelog ]

Fixes: 783d31863f ('irqchip: crossbar: Convert dra7 crossbar...')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-4-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-20 00:25:25 +02:00
Yijing Wang
b35b1df5e6 PCI: Tolerate hierarchies with no Root Port
We should not assume any particular hardware topology.  Commit d0751b98df
("PCI: Add dev->has_secondary_link to track downstream PCIe links") relied
on the assumption that every PCIe hierarchy is rooted at a Root Port.  But
we can't rely on any assumption about what hardware we will find; we just
have to deal with the world as it is.

On some platforms, PCIe devices (endpoints, switch upstream ports, etc.)
appear directly on the root bus, and there is no Root Port in the PCI bus
hierarchy.  For example, Meelis observed these top-level devices on a
Sparc V245:

  0000:02:00.0 PCI bridge to [bus 03-0d]    Switch Upstream Port
  0001:02:00.0 PCI bridge to [bus 03]       PCIe to PCI/PCI-X Bridge

These devices *look* like they have links going upstream, but there really
are no upstream devices.

In set_pcie_port_type(), we used the parent device to figure out which side
of a switch port has a link, so if the parent device did not exist, we
dereferenced a NULL parent pointer.

Check whether the parent device exists before dereferencing it.

Meelis observed this oops on Sparc V245 and T2000.  Ben Herrenschmidt says
this is also possible on IBM PowerVM guests on PowerPC.

[bhelgaas: changelog, comment]
Link: http://lkml.kernel.org/r/alpine.LRH.2.20.1508122118210.18637@math.ut.ee
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
2015-08-19 17:23:17 -05:00
Axel Lin
72ccc89e38 FIRMWARE: bcm47xx_nvram: Fix module license.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11020/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-19 15:00:08 +02:00