Commit graph

209,920 commits

Author SHA1 Message Date
Yuri Ershov
d080e2755d nl80211: Fix memory leaks
In case of errors during message composing msg should be freed after canceling.

Signed-off-by: Yuri Kululin <ext-yuri.kululin@nokia.com>
Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-28 16:24:01 -04:00
Yuri Ershov
e4ab7eb0ae mac80211: Put some code under MESH macro
In the function ieee80211_subif_start_xmit the logic related with
meshdrlen is under CONFIG_MAC80211_MESH macro, but in one place it isn't.
This is some update for this

Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-28 16:24:01 -04:00
John W. Linville
099284bdec Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6 2010-07-28 16:17:49 -04:00
Hans Rosenfeld
1be85a6d93 x86, cpu: Use AMD errata checking framework for erratum 383
Use the AMD errata checking framework instead of open-coding the test.

Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
LKML-Reference: <1280336972-865982-3-git-send-email-hans.rosenfeld@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-07-28 13:12:31 -07:00
Hans Rosenfeld
9d8888c2a2 x86, cpu: Clean up AMD erratum 400 workaround
Remove check_c1e_idle() and use the new AMD errata checking framework
instead.

Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
LKML-Reference: <1280336972-865982-2-git-send-email-hans.rosenfeld@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-07-28 13:12:11 -07:00
Hans Rosenfeld
d78d671db4 x86, cpu: AMD errata checking framework
Errata are defined using the AMD_LEGACY_ERRATUM() or AMD_OSVW_ERRATUM()
macros. The latter is intended for newer errata that have an OSVW id
assigned, which it takes as first argument. Both take a variable number
of family-specific model-stepping ranges created by AMD_MODEL_RANGE().

Iff an erratum has an OSVW id, OSVW is available on the CPU, and the
OSVW id is known to the hardware, it is used to determine whether an
erratum is present. Otherwise, the model-stepping ranges are matched
against the current CPU to find out whether the erratum applies.

For certain special errata, the code using this framework might have to
conduct further checks to make sure an erratum is really (not) present.

Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
LKML-Reference: <1280336972-865982-1-git-send-email-hans.rosenfeld@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-07-28 13:12:04 -07:00
H. Peter Anvin
7d50d07da2 Merge remote branch 'linus/master' into x86/cpu 2010-07-28 13:11:28 -07:00
Thomas Gleixner
47916be4e2 Merge branch 'powerpc.cherry-picks' into timers/clocksource
Conflicts:
	arch/powerpc/kernel/time.c

Reason: The powerpc next tree contains two commits which conflict with
the timekeeping changes:

8fd63a9e powerpc: Rework VDSO gettimeofday to prevent time going backwards
c1aa687d powerpc: Clean up obsolete code relating to decrementer and timebase

John Stultz identified them and provided the conflict resolution.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-07-28 21:49:22 +02:00
Paul Mackerras
d75d68cfef powerpc: Clean up obsolete code relating to decrementer and timebase
Since the decrementer and timekeeping code was moved over to using
the generic clockevents and timekeeping infrastructure, several
variables and functions have been obsolete and effectively unused.
This deletes them.

In particular, wakeup_decrementer() is no longer needed since the
generic code reprograms the decrementer as part of the process of
resuming the timekeeping code, which happens during sysdev resume.
Thus the wakeup_decrementer calls in the suspend_enter methods for
52xx platforms have been removed.  The call in the powermac cpu
frequency change code has been replaced by set_dec(1), which will
cause a timer interrupt as soon as interrupts are enabled, and the
generic code will then reprogram the decrementer with the correct
value.

This also simplifies the generic_suspend_en/disable_irqs functions
and makes them static since they are not referenced outside time.c.
The preempt_enable/disable calls are removed because the generic
code has disabled all but the boot cpu at the point where these
functions are called, so we can't be moved to another cpu.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-28 21:07:12 +02:00
Paul Mackerras
0e469db8f7 powerpc: Rework VDSO gettimeofday to prevent time going backwards
Currently it is possible for userspace to see the result of
gettimeofday() going backwards by 1 microsecond, assuming that
userspace is using the gettimeofday() in the VDSO.  The VDSO
gettimeofday() algorithm computes the time in "xsecs", which are
units of 2^-20 seconds, or approximately 0.954 microseconds,
using the algorithm

	now = (timebase - tb_orig_stamp) * tb_to_xs + stamp_xsec

and then converts the time in xsecs to seconds and microseconds.

The kernel updates the tb_orig_stamp and stamp_xsec values every
tick in update_vsyscall().  If the length of the tick is not an
integer number of xsecs, then some precision is lost in converting
the current time to xsecs.  For example, with CONFIG_HZ=1000, the
tick is 1ms long, which is 1048.576 xsecs.  That means that
stamp_xsec will advance by either 1048 or 1049 on each tick.
With the right conditions, it is possible for userspace to get
(timebase - tb_orig_stamp) * tb_to_xs being 1049 if the kernel is
slightly late in updating the vdso_datapage, and then for stamp_xsec
to advance by 1048 when the kernel does update it, and for userspace
to then see (timebase - tb_orig_stamp) * tb_to_xs being zero due to
integer truncation.  The result is that time appears to go backwards
by 1 microsecond.

To fix this we change the VDSO gettimeofday to use a new field in the
VDSO datapage which stores the nanoseconds part of the time as a
fractional number of seconds in a 0.32 binary fraction format.
(Or put another way, as a 32-bit number in units of 0.23283 ns.)
This is convenient because we can use the mulhwu instruction to
convert it to either microseconds or nanoseconds.

Since it turns out that computing the time of day using this new field
is simpler than either using stamp_xsec (as gettimeofday does) or
stamp_xtime.tv_nsec (as clock_gettime does), this converts both
gettimeofday and clock_gettime to use the new field.  The existing
__do_get_tspec function is converted to use the new field and take
a parameter in r7 that indicates the desired resolution, 1,000,000
for microseconds or 1,000,000,000 for nanoseconds.  The __do_get_xsec
function is then unused and is deleted.

The new algorithm is

	now = ((timebase - tb_orig_stamp) << 12) * tb_to_xs
		+ (stamp_xtime_seconds << 32) + stamp_sec_fraction

with 'now' in units of 2^-32 seconds.  That is then converted to
seconds and either microseconds or nanoseconds with

	seconds = now >> 32
	partseconds = ((now & 0xffffffff) * resolution) >> 32

The 32-bit VDSO code also makes a further simplification: it ignores
the bottom 32 bits of the tb_to_xs value, which is a 0.64 format binary
fraction.  Doing so gets rid of 4 multiply instructions.  Assuming
a timebase frequency of 1GHz or less and an update interval of no
more than 10ms, the upper 32 bits of tb_to_xs will be at least
4503599, so the error from ignoring the low 32 bits will be at most
2.2ns, which is more than an order of magnitude less than the time
taken to do gettimeofday or clock_gettime on our fastest processors,
so there is no possibility of seeing inconsistent values due to this.

This also moves update_gtod() down next to its only caller, and makes
update_vsyscall use the time passed in via the wall_time argument rather
than accessing xtime directly.  At present, wall_time always points to
xtime, but that could change in future.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-28 21:06:47 +02:00
Linus Torvalds
6c50e1a49b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: use complete_all and wake_up_all
  ceph: Correct obvious typo of Kconfig variable "CRYPTO_AES"
  ceph: fix dentry lease release
  ceph: fix leak of dentry in ceph_init_dentry() error path
  ceph: fix pg_mapping leak on pg_temp updates
  ceph: fix d_release dop for snapdir, snapped dentries
  ceph: avoid dcache readdir for snapdir
2010-07-28 11:10:53 -07:00
Steven Whitehouse
d2a97a4e99 GFS2: Use kmalloc when possible for ->readdir()
If we don't need a huge amount of memory in ->readdir() then
we can use kmalloc rather than vmalloc to allocate it. This
should cut down on the greater overheads associated with
vmalloc for smaller directories.

We may be able to eliminate vmalloc entirely at some stage,
but this is easy to do right away.

Also using GFP_NOFS to avoid any issues wrt to deleting inodes
while under a glock, and suggestion from Linus to factor out
the alloc/dealloc.

I've given this a test with a variety of different sized
directories and it seems to work ok.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-28 11:10:03 -07:00
stephen hemminger
eeaf61d889 bridge: add rcu_read_lock on transmit
Long ago, when bridge was converted to RCU, rcu lock was equivalent
to having preempt disabled. RCU has changed a lot since then and
bridge code was still assuming the since transmit was called with
bottom half disabled, it was RCU safe.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28 10:50:55 -07:00
Peter Huewe
33085bb8da RDMA/nes: Convert pci_table entries to PCI_VDEVICE
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-28 10:39:33 -07:00
Takashi Iwai
b6cbe517b9 ALSA: hda - Assume PC-beep as default for Realtek
Enable PC-beep as default for hardwares that aren't compliant with the
SSID value Realtek requires.  In such a case, better to enable the beep
to avoid a regression.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-28 17:43:36 +02:00
Takashi Iwai
8af2591d63 ALSA: hda - Don't register beep input device when no beep is available
We check now the availability of PC beep and skip the build of beep
mixers, but the driver still registers the input device.  This should
be checked as well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-28 17:37:16 +02:00
Ernesto Ramos
0c4a938ed4 staging:ti dspbridge: remove find_gcf from nldr.c
Remove find_gcf from nldr.c and use kernel function
gcd().

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:23:35 -07:00
Ernesto Ramos
7c9305b80c staging:ti dspbridge: remove bridge_brd_delete function
Remove bridge_brd_delete() function since it is
doing the same that bridge_brd_stop().

Signed-off-by: Ernesto Ramos <ernesto@ernesto-desktop.(none)>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:23:20 -07:00
Ernesto Ramos
a2205e487e staging:ti dspbridge: make sure IVA2 is OFF when dev is created
Regardless the IVA2 power state before bridgedriver is
installed, the driver must ensure that IVA2 power
state is OFF when the device driver is created.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:23:20 -07:00
Ernesto Ramos
cfccf244a7 staging:ti dspbridge: proc_load/start should set IVA2 to OFF in case of failure
When a base image is being loaded or started and by some reason
the process fails, the IVA2 should be switched OFF.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:23:20 -07:00
Ernesto Ramos
a2c2272194 staging:ti dspbridge: fix bridge_brd_stop so IVA2 is set OFF
right now, bridge_brd_stop is not changing the IVA2 power state
to OFF since PM_PWSTST_IVA2 is not 0 after calling this function.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:23:19 -07:00
Ernesto Ramos
3a8965fda9 staging:ti dspbridge: remove DSP_FAILED macro definition
Since status succeeded is now 0 macro DSP_FAILED
is not necessary anymore. This patch removes this
define.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:22:43 -07:00
Ernesto Ramos
82f575e5bb staging:ti dspbridge: remove DSP_FAILED macro from services
Since status succeeded is 0, DSP_FAILED macro
is not necessary anymore.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:22:43 -07:00
Ernesto Ramos
b66e0986f9 staging:ti dspbridge: remove DSP_FAILED macro from rmgr
Since status succeeded is 0, DSP_FAILED macro
is not necessary anymore.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:22:43 -07:00
Ernesto Ramos
51d5e099cc staging:ti dspbridge: remove DSP_FAILED macro from pmgr
Since status succeeded is 0, DSP_FAILED macro
is not necessary anymore.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:22:43 -07:00
Ernesto Ramos
d1b2216d13 staging:ti dspbridge: remove DSP_FAILED macro from core
Since status succeeded is 0, DSP_FAILED macro
is not necessary anymore.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:22:43 -07:00
Ernesto Ramos
54621f031c staging:ti dspbridge: remove DSP_SUCCEEDED macro definition
Since status succeeded is now 0 macro DSP_SUCCEEDED
is not necessary anymore. This patch removes this
define.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:22:42 -07:00
Ernesto Ramos
95bd64a893 staging:ti dspbridge: remove DSP_SUCCEEDED macro from services
Since status succeeded is now 0 macro DSP_SUCCEEDED
is not necessary anymore.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:22:42 -07:00
Ernesto Ramos
a741ea6efc staging:ti dspbridge: remove DSP_SUCCEEDED macro from rmgr
Since status succeeded is now 0 macro DSP_SUCCEEDED
is not necessary anymore.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:22:42 -07:00
Ernesto Ramos
157990f0d7 staging:ti dspbridge: remove DSP_SUCCEEDED macro from pmgr
Since status succeeded is now 0 macro DSP_SUCCEEDED
is not necessary anymore.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:22:42 -07:00
Ernesto Ramos
e6486d8cee staging:ti dspbridge: remove DSP_SUCCEEDED macro from core
Since status succeeded is now 0 macro DSP_SUCCEEDED
is not necessary anymore.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:22:41 -07:00
Ernesto Ramos
ecd3d0ca40 staging:ti dspbridge: replace simple_strtoul by strict_strtoul
Replace simple_strtoul by strict_strtoul in atoi function.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:22:05 -07:00
Ernesto Ramos
b3c8aef0a2 staging:ti dspbridge: remove unnecessary volatile variables
Remove unnecessary volatile variables; use accessor
functions __raw_readl/__raw_writel instead when applicable.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:22:04 -07:00
Ernesto Ramos
74ea8ff93b staging:ti dspbridge: remove function delete_strm_mgr
Remove function delete_strm_mgr in strm.c and
use kfree instead.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:22:04 -07:00
Ernesto Ramos
3448c5481c staging:ti dspbridge: remove unnecessary check for NULL pointer in cmm.c
Remove unnecessary check for NULL pointer in cmm.c.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:22:04 -07:00
Ernesto Ramos
3fee78f6be staging:ti dspbridge: remove unused typedef REG16
Remove unused typedef REG16 in dspbridge.

Signed-off-by: Ernesto Ramos <ernesto@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:22:04 -07:00
Pavan Savoy
9f912212cd Staging: ti-st: update ABI and TODO
update TODO to reflect the items taken care of,
update ABI to reflect the new debugfs entries exposed.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:20:56 -07:00
Pavan Savoy
c1afac1502 Staging: ti-st: mv sysfs entries to debugfs
When the chip is in use, information like the chip's ROM version and the
protocols currently making use of the chip needs to be made known to
user-space.
Earlier the version and the protocol-list were exposed as sysfs entries
now cleanup by making them as debugfs entries, also in process remove
any unwanted/previously unused sysfs entries.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:20:56 -07:00
Randy Dunlap
e928c077e5 Staging: line6: needs to select SND_PCM
line6 uses snd_pcm*() functions, so it should select SND_PCM.

ERROR: "snd_pcm_period_elapsed" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_set_ops" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_lib_free_pages" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_lib_ioctl" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_lib_malloc_pages" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_hw_constraint_ratdens" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_format_physical_width" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_lib_preallocate_pages_for_all" [drivers/staging/line6/line6usb.ko] undefined!
ERROR: "snd_pcm_new" [drivers/staging/line6/line6usb.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 08:20:55 -07:00
Christof Schmitt
339f4f4eab [SCSI] zfcp: Trigger logging in the FCP channel on qdio error conditions
Exploit the cio siosl function to trigger logging in the FCP channel
on qdio error conditions. Add a helper function in zfcp_qdio to ensure
that tracing is only triggered once before calling qdio_shutdown.

Trigger in zfcp for hardware logs are:
 - timeout for FSF requests to the FCP channel
 - "no recommendation" status from FCP channel
 - invalid FSF protocol status
 - stalled outbound queue
 - unknown request id on inbound queue
 - QDIO_ERROR_SLSB_STATE

All of the above triggers run from the Linux qdio softirq context, so
no additional synchronization is necessary for the handling of the
ZFCP_STATUS_ADAPTER_SIOSL_ISSUED flag.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:48:58 -05:00
Felix Beck
ef3eb71d8b [SCSI] zfcp: Introduce experimental support for DIF/DIX
Introduce support for DIF/DIX in zfcp: Report the capabilities for the
Scsi_host, map the protection data when issuing I/O requests and
handle the new error codes. Also add the fsf data_direction field to
the hba trace, it is useful information for debugging in that area.
This is an EXPERIMENTAL feature for now.

Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:48:56 -05:00
Christof Schmitt
dcc18f48a2 [SCSI] zfcp: Enable data division support for FCP devices
Try to enable data division support for FCP devices and indicate in
the adapter status flag if it succeeded.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:48:55 -05:00
Swen Schillig
d23948ea38 [SCSI] zfcp: Prevent access on uninitialized memory.
Initialize allocated memory to zero to prevent access on error. This
prevents a possible error in the error handling path.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:48:53 -05:00
Sven Schuetz
2d1e547f75 [SCSI] zfcp: Post events through FC transport class
Post FC transport class netlink events for usage in the userspace,
e.g. for HBAAPI. Supported events are those required for the
polled events in HBAAPI.
- link up
- link down
- incoming RSCN
(events related to FC-AL are not supported, as zfcp has no support for FC-AL)

Signed-off-by: Sven Schuetz <sven@linux.vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:48:52 -05:00
Swen Schillig
706eca49a0 [SCSI] zfcp: Cleanup QDIO attachment and improve processing.
Some definitions and structures in the zfcp QDIO processing are
improved by the removal of not required variables and processing steps.
I addition the naming of some variables is changed to make their purpose
more clear.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:48:50 -05:00
Swen Schillig
01b047599a [SCSI] zfcp: Cleanup function parameters for sbal value.
A lot of functions require the amount of SBALs as one of their
parameter which is most times invariable.  Therefore remove this
parameter and set the SBAL value explicitly if a non standard value is
required.  In addition the warning message "oversized data" is
replaced with a BUG_ON() statement assuring the limits defined and
requested by zfcp.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:48:49 -05:00
Christof Schmitt
faf4cd8542 [SCSI] zfcp: Use correct width for timer_interval field
The timer_interval is 14 bits in width. Introduce a define for
properly masking the value.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:48:48 -05:00
Christof Schmitt
1bf3ff02ca [SCSI] zfcp: Remove SCSI device when removing unit
Configuring a LUN in zfcp, also creates a SCSI device. For
consistency, it makes sense to remove the SCSI device when the LUN is
deconfigured. Replace the flush_work with the call to
scsi_remove_device: scsi_remove_device also takes the scan_mutex that
synchronizes itself with any long running device discovery.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:48:46 -05:00
Christof Schmitt
674c3a993c [SCSI] zfcp: Use memdup_user and kstrdup
Use the functions memdup_user and kstrdup to allocate memory and copy
the data in one step, saving some lines of code.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:48:45 -05:00
Christof Schmitt
f7bd7c3627 [SCSI] zfcp: Fix retry after failed "open port" erp action
Trying to enqueue a port erp action from the port erp strategy will
fail in zfcp_erp_required_act. To try the same action again, return
ZFCP_ERP_FAILED.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28 09:46:42 -05:00