The driver works fine as a module, so allowing building as such. This
adds an exit handler to support module unload.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250702-gpio-palmas-gpio-v4-1-26ba48252f27@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add support for adding GPIs to the event FIFO. This is done by adding
irq_chip support. Like this, one can use the input gpio_keys driver as a
"frontend" device and input handler.
As part of this change, we now implement .request() and .free() as we can't
blindly consume all available pins as GPIOs (example: some pins can be
used for forming a keymap matrix).
Also note that the number of pins can now be obtained from the parent,
top level device. Hence the 'max_gpio' variable can be removed.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-15-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver uses gpiochip_irq_reqres() and gpiochip_irq_relres() which
are only built with GPIOLIB_IRQCHIP=y. Add the missing Kconfig select.
Fixes: 2993d2dd8f ("gpio: timberdale: Make irq_chip immutable")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250522-gpio-fix-v1-4-98ceae7c4c3c@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver uses gpiochip_irq_reqres() and gpiochip_irq_relres() which
are only built with GPIOLIB_IRQCHIP=y. Add the missing Kconfig select.
Fixes: 289e42df13 ("gpio: lpc18xx: Make irq_chip immutable")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250522-gpio-fix-v1-3-98ceae7c4c3c@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver uses gpiochip_irq_reqres() and gpiochip_irq_relres() which
are only built with GPIOLIB_IRQCHIP=y. Add the missing Kconfig select.
Fixes: a30be40bf1 ("gpio: grgpio: Make irq_chip immutable")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250522-gpio-fix-v1-2-98ceae7c4c3c@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver uses gpiochip_irq_reqres() and gpiochip_irq_relres() which
are only built with GPIOLIB_IRQCHIP=y. Add the missing Kconfig select.
Fixes: 7b04f98027 ("gpio: bcm-kona: make irq_chip immutable")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250522-gpio-fix-v1-1-98ceae7c4c3c@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmgeEAYACgkQUa+KL4f8
d2EW6g//Q1uxdE113B4WgLZIN3z3BEAqQwsFRjbgXUcqHTRGbek42dh2PW9DLY7A
PGK1c63jA+pZPA4+UTTAUl+Hse3DV6ZFE9kpdxsLxAP2w83u3FwTUwOG+dJRRKTR
U0EN2FmionjwoZK7rpNGNpYgI1cVos4J8jnVRvc8ete3ZbET5kKZCM9z/LJ9phYG
daAbWZXo8Su7ws6awxWUL3NbOFx+jtX9H7U+UtVJUlEjCQ0vwa9mg7L0DC+WMh0B
n+eGp6RpNqdprIjoVAAh0/7D9jnMgXtj/vL13ofr+eesVA9O1P9lj9wNIOcZ+GIv
LVH/0Cl5dCDjLu0mhrZyuSHi96c1wMdQmBN2/5NGdqYvTo281tSxLWEI7zb26AF9
GhC5TA1OVPAA2zOF1az1bbAs+EmZqkIl9weV7w3Ad37uRLm5J6f6Pjx0gYABFvHW
8Ibny/SDCAe45R81LKG5ITSeJX1athXr5HhW4ShpL10pYQo8VK8tYkW1wtTpcYLc
lBjLmD0M/mdNFo/2Y/Dv24KQeZvpM4Z3IMjIE1kZLcITI14AECUnlp60zWuIU+lh
Z/U4ytrw3/0ac+gBUJ6bhdH8mxp/MHaw/I1mNKmm016sIfqTV5hhGC2i/kRoZki7
r4XlQViW6LqRXPW4WzVL4zgM0m+nM9jbd43K+pF2WUctthGkQ3I=
=2dKC
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-nvmem-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO and NVMEM due for the v6.16 merge window
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
This driver supports the GPIO functions using the platform device
registered by the core MFD driver.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250509-max77759-mfd-v10-2-962ac15ee3ef@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Support for building it as a module for use on the Android platform,
because the Android kernel(GKI) doesn't contain board-specific drivers,
it requires that these drivers be built as a module and loaded into the
system.
Signed-off-by: Jindong Yue <jindong.yue@nxp.com>
Link: https://lore.kernel.org/r/20250416062605.1948856-1-jindong.yue@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When building gpio-ich.c for a platform that does not have IO port
access like s390, there are several errors due to the use of inl() and
outl() throughout the driver:
drivers/gpio/gpio-ich.c: In function 'ichx_read_bit':
include/asm-generic/io.h:578:14: error: call to '_inl' declared with attribute error: inl() requires CONFIG_HAS_IOPORT
Only allow compile testing when the targeted platform selects HAS_IOPORT
so that there are no compile time errors.
Fixes: f3592d252f ("gpio: ich: enable building with COMPILE_TEST=y")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504171941.g1yXja0j-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250418-gpio-ich-fix-build-without-ioport-v1-1-83fc753438ec@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Implement GPIO functionality which capable of setting pin as
input, output. Also, each pin can be used as interrupt which
support rising, falling, or both edge type trigger.
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250412-03-k1-gpio-v8-2-1c6862d272ec@gentoo.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The Blaize BLZP1600 GPIO controller is only present on BLaize BLZP1600
SoCs. Hence add a dependency on ARCH_BLAIZE, to prevent asking the user
about this driver when configuring a kernel without Blaize platform
support.
Fixes: 602ae04f56 ("gpio: Enable Blaize BLZP1600 GPIO support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
Link: https://lore.kernel.org/r/a75af4b623579a193b4a59350c063969aabb5b71.1744190524.git.geert+renesas@glider.be
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The existing sysfs 'new_device' interface has several limitations:
* No way to determine when GPIO aggregator creation is complete.
* No way to retrieve errors when creating a GPIO aggregator.
* No way to trace a GPIO line of an aggregator back to its
corresponding physical device.
* The 'new_device' echo does not indicate which virtual gpiochip<N>
was created.
* No way to assign names to GPIO lines exported through an aggregator.
Introduce the new configfs interface for gpio-aggregator to address
these limitations. It provides a more streamlined, modern, and
extensible configuration method. For backward compatibility, the
'new_device' interface and its behavior is retained for now.
This commit implements basic functionalities:
/config/gpio-aggregator/<name-of-your-choice>/
/config/gpio-aggregator/<name-of-your-choice>/live
/config/gpio-aggregator/<name-of-your-choice>/dev_name
/config/gpio-aggregator/<name-of-your-choice>/<lineY>/
/config/gpio-aggregator/<name-of-your-choice>/<lineY>/key
/config/gpio-aggregator/<name-of-your-choice>/<lineY>/offset
/config/gpio-aggregator/<name-of-your-choice>/<lineY>/name
Basic setup flow is:
1. Create a directory for a GPIO aggregator.
2. Create subdirectories for each line you want to instantiate.
3. In each line directory, configure the key and offset.
The key/offset semantics are as follows:
* If offset is >= 0:
- key specifies the name of the chip this GPIO belongs to
- offset specifies the line offset within that chip.
* If offset is <0:
- key needs to specify the GPIO line name.
4. Return to the aggregator's root directory and write '1' to the live
attribute.
For example, the command in the existing kernel doc:
echo 'e6052000.gpio 19 e6050000.gpio 20-21' > new_device
is equivalent to:
mkdir /sys/kernel/config/gpio-aggregator/<custom-name>
# Change <custom-name> to name of your choice (e.g. "aggr0")
cd /sys/kernel/config/gpio-aggregator/<custom-name>
mkdir line0 line1 line2 # Only "line<Y>" naming allowed.
echo e6052000.gpio > line0/key
echo 19 > line0/offset
echo e6050000.gpio > line1/key
echo 20 > line1/offset
echo e6050000.gpio > line2/key
echo 21 > line2/offset
echo 1 > live
The corresponding gpio_device id can be identified as follows:
cd /sys/kernel/config/gpio-aggregator/<custom-name>
ls -d /sys/devices/platform/`cat dev_name`/gpiochip*
Also, via configfs, custom GPIO line name can be set like this:
cd /sys/kernel/config/gpio-aggregator/<custom-name>
echo "abc" > line1/name
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250407043019.4105613-5-koichiro.den@canonical.com
[Bartosz: remove stray newlines]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Blaize BLZP1600 GPIO controller is provided by VeriSilicon
Microelectronics based on the GPIO APB v0.2 design. It has 32
input/output ports which can be configured as edge or level
triggered interrupts. It also provides a de-bounce feature.
This controller is used on the Blaize BLZP1600 SoC.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
Link: https://lore.kernel.org/r/20250327-kernel-upstreaming-add_gpio_support-v2-2-bbe51f8d66da@blaize.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
After adding a pinctrl flag to gpio-mmio we can use it
for driving gpio-vf610.
The existing code has the same semantics and the generic
gpio-mmio, including reading from the data out register
when the direction is set to input, and it can also handle
the absence of the direction register better than the
current driver: we get the direction from the shadow
direction registers in gpio-mmio instead.
Since gpio-mmio has an internal spinlock we can drop the
direction-protecting spinlock from the driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Tested-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20250219-vf610-mmio-v3-2-588b64f0b689@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Update gpio-virtuser to use the new dev-sync-probe helper functions for
synchronized platform device creation, reducing code duplication.
No functional change.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250221133501.2203897-4-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Update gpio-sim to use the new dev-sync-probe helper functions for
synchronized platform device creation, reducing code duplication.
No functional change.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250221133501.2203897-3-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Both gpio-sim and gpio-virtuser share a mechanism to instantiate a
platform device, wait for probe completion, and retrieve the probe
success or error status synchronously. With gpio-aggregator planned to
adopt this approach for its configfs interface, it's time to factor
out the common code.
Add dev-sync-probe.[ch] to house helper functions used by all such
implementations.
No functional change.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250221133501.2203897-2-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
AigLZ6M=
=Y/7F
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into HEAD
Linux 6.14-rc4
Remove unneeded dependency to OF_GPIO which driver does not use.
Fixes: 3c7469514d ("gpio: 74x164: Make use of device properties")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250207151825.2122419-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
While the Aeroflex Gaisler GRGPIO driver has no build-time dependency on
gpiolib-of, it supports only DT-based configuration, and is used only on
DT systems. Hence add a dependency on OF, to prevent asking the user
about this driver when configuring a kernel without DT support.
Fixes: bc40668def ("gpio: grgpio: drop Kconfig dependency on OF_GPIO")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/db6da3d11bf850d89f199e5c740d8f133e38078d.1738760539.git.geert+renesas@glider.be
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Driver improvements:
- support a new model in gpio-mpc8xxx
- refactor gpio-tqmx86 and add support for direction setting
- allow building gpio-omap with COMPILE_TEST=y
- use gpiochip_get_data() instead of dev_get_drvdata() in gpio-twl6040
- drop unued field from driver data in gpio-altera
- use generic request/free callbacks in gpio-regmap for better integration
with pinctrl
- use dev_err_probe() where applicable in gpio-pca953x
- use existing dedicated GPIO defines in gpio-tps65219 instead of custom
ones
DT bindings:
- document a new model in fsl,qoriq-gpio
- explain the chip's latch clock pin and how it works like chip-select
in fairchild,74hc595
- enable the gpio-line-names property for gpio-brcmstb
-----BEGIN PGP SIGNATURE-----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=iXkF
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Thanks to little activity in December, this is really tiny. Just a few
updates to drivers and device-tree bindings.
Driver improvements:
- support a new model in gpio-mpc8xxx
- refactor gpio-tqmx86 and add support for direction setting
- allow building gpio-omap with COMPILE_TEST=y
- use gpiochip_get_data() instead of dev_get_drvdata() in
gpio-twl6040
- drop unued field from driver data in gpio-altera
- use generic request/free callbacks in gpio-regmap for better
integration with pinctrl
- use dev_err_probe() where applicable in gpio-pca953x
- use existing dedicated GPIO defines in gpio-tps65219 instead of
custom ones
DT bindings:
- document a new model in fsl,qoriq-gpio
- explain the chip's latch clock pin and how it works like
chip-select in fairchild,74hc595
- enable the gpio-line-names property for gpio-brcmstb"
* tag 'gpio-updates-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: regmap: Use generic request/free ops
gpio: altera: Drop .mapped_irq from driver data
gpio: mpc8xxx: Add MPC8314 support
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,mpc8314-gpio
dt-bindings: gpio: fairchild,74hc595: Document chip select vs. latch clock
gpio: tps65219: Use existing kernel gpio macros
gpio: pca953x: log an error when failing to get the reset GPIO
dt-bindings: gpio: brcmstb: permit gpio-line-names property
gpio: tqmx86: add support for changing GPIO directions
gpio: tqmx86: introduce tqmx86_gpio_clrsetbits() helper
gpio: tqmx86: use cleanup guards for spinlock
gpio: tqmx86: consistently refer to IRQs by hwirq numbers
gpio: tqmx86: add macros for interrupt configuration
gpio: omap: allow building the module with COMPILE_TEST=y
gpio: twl4030: use gpiochip_get_data
For better build coverage, allow building the gpio-omap driver with
COMPILE_TEST Kconfig option enabled.
While at it: simplify the dependencies and drop the dependency on ARM as
it's already implied by ARCH_OMAP.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20241205120610.40644-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Support for Tegra234 was added to the tegra186 driver in 1db9b241bb (
"gpio: tegra186: Add support for Tegra234"). But the driver is not
selectable on Tegra234. Update the Kconfig entry to allow the driver to be
enabled on Tegra234.
Enable the driver by default on Tegra 234 as well, similar to the other
platforms it supports.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241113162939.886242-1-lars@metafoo.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add a driver to support the Polarfire SoC gpio controller. Interrupt
controller support is unavailable for now and will be added at a later
date.
Signed-off-by: Lewis Hanly <lewis.hanly@microchip.com>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241104-tiny-evaluate-9336020b4b6a@spud
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The 'if !EXPERT' bit will work fine if it follows the 'bool "foobar"'
declaration. No need to have separate entries for it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241014110707.101320-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Make it possible to build the module when COMPILE_TEST is enabled for
better build coverage. Stop using of_match_ptr() to avoid build warnings.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241007103440.38416-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver doesn't really depend on interfaces from OF_GPIO so the
Kconfig dependency can be dropped.
Suggested-by: Uwe Kleine-König <ukleinek@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Link: https://lore.kernel.org/r/20241008081555.23465-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
FTDI FT2232H is a USB to GPIO chip. Sealevel produces some devices
with this chip. FT2232H presents itself as a composite device with two
interfaces (each is an "MPSSE"). Each MPSSE has two banks (high and low)
of 8 GPIO each. I believe some MPSSE's have only one bank, but I don't
know how to identify them (I don't have any for testing) and as a result
are unsupported for the time being.
Additionally, this driver provides software polling-based interrupts for
edge detection. For the Sealevel device I have to test with, this works
well because there is hardware debouncing. From talking to Sealevel's
people, this is their preferred way to do edge detection.
Signed-off-by: Mary Strodl <mstrodl@csh.rit.edu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241009131131.1618329-1-mstrodl@csh.rit.edu
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----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=vhYn
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-i2c-watchdog-v6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO, I2C and Watchdog due for the v6.13 merge window
Add gpio support for the Congatec Board Controller.
This Board Controller has 14 GPIO pins.
The driver is probed by the Congatec Board Controller MFD driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-2-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver doesn't really depend on gpiolib-of being built and can be
compiled without it.
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240930144804.75068-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ADP5585 is a 10/11 input/output port expander with a built in keypad
matrix decoder, programmable logic, reset generator, and PWM generator.
This driver supports the GPIO function using the platform device
registered by the core MFD driver.
The driver is derived from an initial implementation from NXP, available
in commit 451f61b46b76 ("MLK-25917-2 gpio: adp5585-gpio: add
adp5585-gpio support") in their BSP kernel tree. It has been extensively
rewritten.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240722121100.2855-4-laurent.pinchart@ideasonboard.com
Signed-off-by: Lee Jones <lee@kernel.org>
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more info
on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core to using
a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs from actual
hardware and driving tests of the in-kernel GPIO API from user-space over
debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first glance"
debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested as irqs
via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to errno
vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with regards to
reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop tempting
people to use it
- document the preference for using pread() for reading edge events in the
sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to specify
a number of callbacks callers can use to be notified about irqs being
requested and released
-----BEGIN PGP SIGNATURE-----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=kK88
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.
Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"
* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...
The GPIO subsystem used to have a serious problem with undefined behavior
and use-after-free bugs on hot-unplug of GPIO chips. This can be
considered a corner-case by some as most GPIO controllers are enabled
early in the boot process and live until the system goes down but most
GPIO drivers do allow unbind over sysfs, many are loadable modules that
can be (force) unloaded and there are also GPIO devices that can be
dynamically detached, for instance CP2112 which is a USB GPIO expender.
Bugs can be triggered both from user-space as well as by in-kernel users.
We have the means of testing it from user-space via the character device
but the issues manifest themselves differently in the kernel.
This is a proposition of adding a new virtual driver - a configurable
GPIO consumer that can be configured over configfs (similarly to
gpio-sim) or described on the device-tree.
This driver is aimed as a helper in spotting any regressions in
hot-unplug handling in GPIOLIB.
Link: https://lore.kernel.org/r/20240708142912.120570-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>