Commit graph

211,079 commits

Author SHA1 Message Date
Gustavo F. Padovan
c74e560cd0 Bluetooth: Add support for Segmentation and Reassembly of SDUs
ERTM should use Segmentation and Reassembly to break down a SDU in many
PDUs on sending data to the other side.

On sending packets we queue all 'segments' until end of segmentation and
just the add them to the queue for sending. On receiving we create a new
SKB with the SDU reassembled.

Initially based on a patch from Nathan Holstein <nathan@lampreynetworks.com>

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:53:58 -07:00
Gustavo F. Padovan
1c2acffb76 Bluetooth: Add initial support for ERTM packets transfers
This patch adds support for ERTM transfers, without retransmission, with
txWindow up to 63 and with acknowledgement of packets received. Now the
packets are queued before call l2cap_do_send(), so packets couldn't be
sent at the time we call l2cap_sock_sendmsg(). They will be sent in
an asynchronous way on later calls of l2cap_ertm_send(). Besides if an
error occurs on calling l2cap_do_send() we disconnect the channel.

Initially based on a patch from Nathan Holstein <nathan@lampreynetworks.com>

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:53:01 -07:00
Gustavo F. Padovan
22121fc915 Bluetooth: Create separate l2cap_send_disconn_req() function
The code for sending a disconnect request was repeated several times
within L2CAP source code. So move this into its own function.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:50:07 -07:00
Gustavo F. Padovan
f2fcfcd670 Bluetooth: Add configuration support for ERTM and Streaming mode
Add support to config_req and config_rsp to configure ERTM and Streaming
mode. If the remote device specifies ERTM or Streaming mode, then the
same mode is proposed. Otherwise ERTM or Basic mode is used. And in case
of a state 2 device, the remote device should propose the same mode. If
not, then the channel gets disconnected.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:50:07 -07:00
Marcel Holtmann
65c7c49184 Bluetooth: Add L2CAP RFC option if ERTM is enabled
When trying to establish a connection with Enhanced Retransmission mode
enabled, the RFC option needs to be added to the configuration.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:50:07 -07:00
Marcel Holtmann
c6b03cf986 Bluetooth: Allow setting of L2CAP ERTM via socket option
To enable Enhanced Retransmission mode it needs to be set via a socket
option. A different mode can be set on a socket, but on listen() and
connect() the mode is checked and ERTM is only allowed if it is enabled
via the module parameter.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:50:07 -07:00
Marcel Holtmann
44dd46de32 Bluetooth: Add module option to enable L2CAP ERTM support
Since the Enhanced Retransmission mode for L2CAP is still under heavy
development disable it by default and provide a module option to enable
it manually for testing.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:50:07 -07:00
Marcel Holtmann
52d18347df Bluetooth: Coding style cleanup from previous rfcomm_init bug fix
The rfcomm_init bug fix went into the kernel premature before it got fully
reviewed and acknowledged by the Bluetooth maintainer. So fix up the coding
style now.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:49:36 -07:00
Thomas Gleixner
a6a67efd70 Bluetooth: Convert hdev->req_lock to a mutex
hdev->req_lock is used as mutex so make it a mutex.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:35:02 -07:00
Julia Lawall
5959809ded Bluetooth: Add missing kmalloc NULL tests to Marvell driver
Check that the result of kmalloc is not NULL before dereferencing it.
The patch also replaces kmalloc + memset by kzalloc.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
identifier f;
constant char *C;
@@

x = \(kmalloc\|kcalloc\|kzalloc\)(...);
... when != x == NULL
    when != x != NULL
    when != (x || ...)
(
kfree(x)
|
f(...,C,...,x,...)
|
*f(...,x,...)
|
*x->f
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:33:22 -07:00
Bing Zhao
3318b2362b Bluetooth: Fix incorrect alignment in Marvell BT-over-SDIO driver
The driver uses "u32" for alignment check and calculation which
works only on 32-bit system. It will crash the 64-bit system.
Replace "u32" with "unsigned long" to fix this issue.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:25:34 -07:00
Marcel Holtmann
9374253ffe Bluetooth: Remove Enter/Leave debug statements from Marvell driver
The Marvell Bluetooth driver is full of Enter/Leave debug statements and
all of them are really pointless and only clutter the code. Seems to be
some left-overs when they ported the driver from Windows. For the Linux
driver lets remove these.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:25:34 -07:00
Marcel Holtmann
e0721f99ba Bluetooth: Fix last few compiler warning within Marvell core driver
After fixing the driver to use skb_put properly for their HCI commands
only a few compiler warnings are left. Add proper casting for them.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:25:34 -07:00
Marcel Holtmann
91d697302b Bluetooth: Fix Marvell driver to use skb_put and hci_opcode_pack
The Marvell driver has some weird quirks on how to construct proper SKBs
with Bluetooth HCI commands. Fix it to use skb_put properly and also
use hci_opcode_pack instead of self-crafted macro.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:25:34 -07:00
Marcel Holtmann
60dee5ccd7 Bluetooth: Remove private device name of Marvell SDIO driver
For some reason the btmrvl_device struct has a name field that the SDIO
fills in, but then never ever uses again. That is totally pointless and
so just remove it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:25:34 -07:00
Marcel Holtmann
9666fb356d Bluetooth: Fix module description strings for Marvell driver
Make the module description entries for the core and also the Marvell
SDIO driver match common practive inside the Bluetooth subsystem.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:25:34 -07:00
Marcel Holtmann
dcf47f3bc7 Bluetooth: Fix complicated assignment of firmware for Marvell devices
The Marvell Bluetooth SDIO driver has a really complicated concept on how
firmware names are assigned to specific device ids. Fix that by doing a
proper structure and assign it to the module device table.

And while at it fix various coding style weirdness that is still present
in this driver.

Signed-off-by: Marcel Holtman <marcel@holtmann.org>
2009-08-22 14:25:33 -07:00
Marcel Holtmann
4271e08d8b Bluetooth: Some coding style cleanup for Marvell core driver
The Marvell core Bluetooth driver has various weird casting and unneeded
braces in its code that makes it hard to read. Remove all of these to
make the code a little bit simpler.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:25:33 -07:00
Marcel Holtmann
542399037d Bluetooth: Remove pointless casts from Marvell debugfs support
The Marvell Bluetooth driver has debugfs support and they are casting
like there is no tomorrow. Remove all of them and magically the code
becomes more readable.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:25:33 -07:00
Marcel Holtmann
944fe798c6 Bluetooth: Remove pointless ifdef protection for Marvell header files
Both header files of the Marvell Bluetooth driver are private anyway and
if the driver happens to include them twice or they create a circular
dependency then the driver needs fixing. So just remove both pointless
ifdefs.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:25:33 -07:00
Marcel Holtmann
08b0b0ce8c Bluetooth: Fix compilation of Marvell driver without debugfs
The Makefile entry for the Marvell driver is broken when it comes to
handling the optional DEBUG_FS correctly. That must have been the reason
why they were using select in Kconfig in the first place. Fix this and
make it really optional.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:25:33 -07:00
Marcel Holtmann
e7a25f9839 Bluetooth: Fix Kconfig for Marvell Bluetooth driver
The Marvell driver selects DEBUG_FS and FW_LOADER for its core driver
and that is pointless. Don't select DEBUG_FS since it is either enabled
or not and it is not for the driver to enable it. Also FW_LOADER is
only used within the SDIO driver and so just have that one select the
FW_LOADER option.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:25:33 -07:00
Bing Zhao
196be0cd01 Bluetooth: Add documentation for Marvell Bluetooth driver
add btmrvl.txt to Documentation/

This patch incorporates a lot of comments given by
Nicolas Pitre <nico@marvell.com>. Many thanks to Nicolas Pitre.

Signed-off-by: Rahul Tank <rahult@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:25:32 -07:00
Bing Zhao
fb784f0508 Bluetooth: Add debugfs support to btmrvl driver
/debug/btmrvl/config/
/debug/btmrvl/status/

See Documentation/btmrvl.txt for details.

This patch incorporates a lot of comments given by
Nicolas Pitre <nico@marvell.com>. Many thanks to Nicolas Pitre.

Signed-off-by: Rahul Tank <rahult@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:25:32 -07:00
Bing Zhao
789221ecc8 Bluetooth: Add Marvell BT-over-SDIO driver
This driver supports Marvell Bluetooth enabled devices with SDIO
interface. Currently only SD8688 chip is supported.

The helper/firmware images of SD8688 can be downloaded from this tree:
git://git.infradead.org/users/dwmw2/linux-firmware.git

This patch incorporates a lot of comments given by
Nicolas Pitre <nico@marvell.com>. Many thanks to Nicolas Pitre.

Signed-off-by: Rahul Tank <rahult@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:25:32 -07:00
Bing Zhao
132ff4e5fa Bluetooth: Add btmrvl driver for Marvell Bluetooth devices
This driver provides basic definitions and library functions to
support Marvell Bluetooth enabled devices, such as 88W8688 WLAN/BT
combo chip.

This patch incorporates a lot of comments given by
Nicolas Pitre <nico@marvell.com>. Many thanks to Nicolas Pitre.

Signed-off-by: Rahul Tank <rahult@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:25:32 -07:00
Marcel Holtmann
edad638869 Bluetooth: Let HIDP grab the device reference for connections
The core exports the hci_conn_hold_device() and hci_conn_put_device()
functions for device reference of connections. Use this to ensure that
the uevents from the parent are send after the child ones.

Based on a report by Brian Rogers <brian@xyzw.org>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:22:15 -07:00
Marcel Holtmann
9eba32b86d Bluetooth: Add extra device reference counting for connections
The device model itself has no real usable reference counting at the
moment and this causes problems if parents are deleted before their
children. The device model itself handles the memory details of this
correctly, but the uevent order is not consistent. This causes various
problems for systems like HAL or even X.

So until device_put() does a proper cleanup, the device for Bluetooth
connection will be protected with an extra reference counting to ensure
the correct order of uevents when connections are terminated.

This is not an automatic feature. Higher Bluetooth layers like HIDP or
BNEP should grab this new reference to ensure that their uevents are
send before the ones from the parent device.

Based on a report by Brian Rogers <brian@xyzw.org>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:19:26 -07:00
Marcel Holtmann
364f63519d Bluetooth: Disconnect HIDRAW devices on disconnect
Currently the HID subsystem will create HIDRAW devices for the transport
driver, but it will not disconnect them. Until the HID subsytem gets
fixed, ensure that HIDRAW and HIDDEV devices are disconnected when the
Bluetooth HID device gets removed.

Based on a patch from Brian Rogers <brian@xyzw.org>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:15:53 -07:00
Vikram Kandukuri
290ba20081 Bluetooth: Improve USB driver throughput by increasing the frame size
This patch increases the receive buffer size to HCI_MAX_FRAME_SIZE
which improves the RX throughput considerably.

Tested against BRM/Atheros/CSR USB Dongles with PAN profile using
iperf and chariot. This gave significant (around 40%) increase
in performance (increased from 0.8 to 1.5 Mb/s in Sheld room)

Signed-off-by: Vikram Kandukuri <vikram.kandukuri@atheros.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:12:37 -07:00
Vikram Kandukuri
981b1414d7 Bluetooth: Fix missing scheduling when VIRTUAL_CABLE_UNPLUG is received
There is a test case in PTS tool; PTS will send the VIRTUAL_CABLE_UNPLUG
command to IUT. Then IUT should disconnect the channel and kill the HID
session when it receives the command. The VIRTUAL_CABLE_UNPLUG command
is parsed by HID transport, but it is not scheduled to do so. Add a
call to hidp_schedule() to kill the session.

Signed-off-by: Jothikumar Mothilal <jothikumar.mothilal@atheros.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:12:17 -07:00
Marcel Holtmann
fd0b3ff707 Bluetooth: Add proper shutdown support to SCO sockets
The SCO sockets for Bluetooth audio setup and streaming are missing the
shutdown implementation. This hasn't been a problem so far, but with a
more deeper integration with PulseAudio it is important to shutdown SCO
sockets properly.

Also the Headset profile 1.2 has more detailed qualification tests that
require that SCO and RFCOMM channels are terminated in the right order. A
proper shutdown function is necessary for this.

Based on a report by Johan Hedberg <johan.hedberg@nokia.com>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tested-by: Johan Hedberg <johan.hedberg@nokia.com>
2009-08-22 14:11:46 -07:00
Linus Torvalds
3edf2fb9d8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: check saved state before restore
2009-08-22 12:14:01 -07:00
Linus Torvalds
e3054ea7f7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] mpt2sas: fix config request and diag reset deadlock
  [SCSI] mpt2sas: Bump driver version 01.100.04.00
  [SCSI] mpt2sas: fix oops because drv data points to NULL on resume from hibernate
  [SCSI] mpt2sas: fix crash due to Watchdog is active while OS in standby mode
  [SCSI] mpt2sas: fix infinite loop inside config request
  [SCSI] mpt2sas: Excessive log info causes sas iounit page time out
  [SCSI] mpt2sas: Raid 10 Value is showing as Raid 1E in /va/log/messages
  [SCSI] mpt2sas: Expander fix oops saying "Already part of another port"
  [SCSI] mpt2sas: Introduced check for enclosure_handle to avoid crash
2009-08-22 08:30:58 -07:00
Paul E. McKenney
b560d8ad85 rcu: Expunge lingering references to CONFIG_CLASSIC_RCU, optimize on !SMP
A couple of references to CONFIG_CLASSIC_RCU have survived.
Although these are harmless, it is past time for them to go.
The one in hardirq.h is strictly a readability problem.

The two in pagemap.h appear to disable a !SMP performance
optimization (which this patch re-enables).

This does raise the issue as to whether pagemap.h should really
be referring to the CPU implementation.  Long term, I intend to
make the RCU implementation driven by CONFIG_PREEMPT, at which
point these should change from defined(CONFIG_TREE_RCU) to
!defined(CONFIG_PREEMPT). In the meantime, is there something
else that could be done in pagemap.h?

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josht@linux.vnet.ibm.com
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
LKML-Reference: <20090822050851.GA8414@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-22 13:07:09 +02:00
Paul Mundt
4f896ffca2 sh: unwinder: cacheline align slab cache objects.
The CIE and FDE structs are big enough and accessed regularly enough in
certain configurations to make cacheline alignment useful.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-22 19:03:25 +09:00
Artem Bityutskiy
8c6866b071 UBIFS: constify file and inode operations
This patch adds 'const' qualifier to UBIFS xattr inode and file
operations.

Pointed-out-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-22 11:54:51 +03:00
Linus Torvalds
422bef879e Linux 2.6.31-rc7 v2.6.31-rc7 2009-08-21 18:00:46 -07:00
Linus Torvalds
8e9d78edea Re-introduce page mapping check in mark_buffer_dirty()
In commit a8e7d49aa7 ("Fix race in
create_empty_buffers() vs __set_page_dirty_buffers()"), I removed a test
for a NULL page mapping unintentionally when some of the code inside
__set_page_dirty() was moved to the callers.

That removal generally didn't matter, since a filesystem would serialize
truncation (which clears the page mapping) against writing (which marks
the buffer dirty), so locking at a higher level (either per-page or an
inode at a time) should mean that the buffer page would be stable.  And
indeed, nothing bad seemed to happen.

Except it turns out that apparently reiserfs does something odd when
under load and writing out the journal, and we have a number of bugzilla
entries that look similar:

	http://bugzilla.kernel.org/show_bug.cgi?id=13556
	http://bugzilla.kernel.org/show_bug.cgi?id=13756
	http://bugzilla.kernel.org/show_bug.cgi?id=13876

and it looks like reiserfs depended on that check (the common theme
seems to be "data=journal", and a journal writeback during a truncate).

I suspect reiserfs should have some additional locking, but in the
meantime this should get us back to the pre-2.6.29 behavior.

Pattern-pointed-out-by: Roland Kletzing <devzero@web.de>
Cc: stable@kernel.org (2.6.29 and 2.6.30)
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-21 17:40:08 -07:00
H. Peter Anvin
5400743db5 x86, mtrr: make mtrr_aps_delayed_init static bool
mtr_aps_delayed_init was declared u32 and made global, but it only
ever takes boolean values and is only ever used in
arch/x86/kernel/cpu/mtrr/main.c.  Declare it "static bool" and remove
external references.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
2009-08-21 17:00:02 -07:00
Suresh Siddha
d0af9eed5a x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init
SDM Vol 3a section titled "MTRR considerations in MP systems" specifies
the need for synchronizing the logical cpu's while initializing/updating
MTRR.

Currently Linux kernel does the synchronization of all cpu's only when
a single MTRR register is programmed/updated. During an AP online
(during boot/cpu-online/resume)  where we initialize all the MTRR/PAT registers,
we don't follow this synchronization algorithm.

This can lead to scenarios where during a dynamic cpu online, that logical cpu
is initializing MTRR/PAT with cache disabled (cr0.cd=1) etc while other logical
HT sibling continue to run (also with cache disabled because of cr0.cd=1
on its sibling).

Starting from Westmere, VMX transitions with cr0.cd=1 don't work properly
(because of some VMX performance optimizations) and the above scenario
(with one logical cpu doing VMX activity and another logical cpu coming online)
can result in system crash.

Fix the MTRR initialization by doing rendezvous of all the cpus. During
boot and resume, we delay the MTRR/PAT init for APs till all the
logical cpu's come online and the rendezvous process at the end of AP's bringup,
will initialize the MTRR/PAT for all AP's.

For dynamic single cpu online, we synchronize all the logical cpus and
do the MTRR/PAT init on the AP that is coming online.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-21 16:25:55 -07:00
Suresh Siddha
269c861baa generic-ipi: Allow cpus not yet online to call smp_call_function with irqs disabled
Because of deadlock possiblities smp_call_function() is not allowed to
be called with interrupts disabled. Add an exception for the cpu not
yet online, as no one else can send smp call function interrupt to this
cpu that is not yet online and as such deadlock condition is not possible.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-21 16:25:43 -07:00
Jan Beulich
8b5a10fc6f x86: properly annotate alternatives.c
Some of the NOPs tables aren't used on 64-bits, quite some code and
data is needed post-init for module loading only, and a couple of
functions aren't used outside that file (i.e. can be static, and don't
need to be exported).

The change to __INITDATA/__INITRODATA is needed to avoid an assembler
warning.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4A8BC8A00200007800010823@vpn.id2.novell.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-08-21 15:30:12 -07:00
Paul Mundt
fa9d3b4da5 Merge branch 'sh/dwarf-unwinder'
Conflicts:
	arch/sh/kernel/cpu/sh3/entry.S
2009-08-22 05:37:14 +09:00
Paul Mundt
74db2479c1 sh64: dummy unwinder BUG wrappers.
sh64 does not yet support GENERIC_BUG, but still wants unwinder support.
Alias UNWINDER_BUG and UNWINDER_BUG_ON to their BUG counterparts until
the conversion to GENERIC_BUG is completed.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-22 05:31:45 +09:00
Paul Mundt
e115f2c17c sh: unwinder: Use a special bug flag for unwinder traps.
This simplifies the unwinder trap handling, dropping the use of the
special trapa vector and simply piggybacking on top of the BUG support. A
new BUGFLAG_UNWINDER is added for flagging the unwinder fault, before
continuing on with regular BUG dispatch.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-22 05:28:25 +09:00
David S. Miller
649bf17829 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2009-08-21 13:13:04 -07:00
Jan Beulich
5946fa3d5c x86, hpet: Simplify the HPET code
On 64-bits, using unsigned long when unsigned int suffices
needlessly creates larger code (due to the need for REX
prefixes), and most of the logic in hpet.c really doesn't need
64-bit operations.

At once this avoids the need for a couple of type casts.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
LKML-Reference: <4A8BC9780200007800010832@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-21 21:55:25 +02:00
john stultz
da15cfdae0 time: Introduce CLOCK_REALTIME_COARSE
After talking with some application writers who want very fast, but not
fine-grained timestamps, I decided to try to implement new clock_ids
to clock_gettime(): CLOCK_REALTIME_COARSE and CLOCK_MONOTONIC_COARSE
which returns the time at the last tick. This is very fast as we don't
have to access any hardware (which can be very painful if you're using
something like the acpi_pm clocksource), and we can even use the vdso
clock_gettime() method to avoid the syscall. The only trade off is you
only get low-res tick grained time resolution.

This isn't a new idea, I know Ingo has a patch in the -rt tree that made
the vsyscall gettimeofday() return coarse grained time when the
vsyscall64 sysctrl was set to 2. However this affects all applications
on a system.

With this method, applications can choose the proper speed/granularity
trade-off for themselves.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: nikolag@ca.ibm.com
Cc: Darren Hart <dvhltc@us.ibm.com>
Cc: arjan@infradead.org
Cc: jonathan@jonmasters.org
LKML-Reference: <1250734414.6897.5.camel@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-21 21:43:46 +02:00
Masami Hiramatsu
1909629fb1 perf trace: Add OPT_END to option array of perf-trace
Add OPT_END to option array of perf-trace for fixing a SEGV bug when
showing perf-trace help message.

Without this patch;
 ./perf trace -h

 usage: perf trace [<options>] <command>

    -D, --dump-raw-trace  dump raw trace in ASCII
    -v, --verbose         be more verbose (show symbol address, etc)
    -f, Segmentation fault

With this patch:
 ./perf trace -h

 usage: perf trace [<options>] <command>

    -D, --dump-raw-trace  dump raw trace in ASCII
    -v, --verbose         be more verbose (show symbol address, etc)

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090821185603.11039.62109.stgit@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-21 21:42:43 +02:00