Commit graph

211,079 commits

Author SHA1 Message Date
Huang Ying
62c5593aea crypto: gcm - fix another complete call in complete fuction
The flow of the complete function (xxx_done) in gcm.c is as follow:

void complete(struct crypto_async_request *areq, int err)
{
	struct aead_request *req = areq->data;

	if (!err) {
		err = async_next_step();
		if (err == -EINPROGRESS || err == -EBUSY)
			return;
	}

	complete_for_next_step(areq, err);
}

But *areq may be destroyed in async_next_step(), this makes
complete_for_next_step() can not work properly. To fix this, one of
following methods is used for each complete function.

- Add a __complete() for each complete(), which accept struct
  aead_request *req instead of areq, so avoid using areq after it is
  destroyed.

- Expand complete_for_next_step().

The fixing method is based on the idea of Herbert Xu.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-11-16 21:52:22 +08:00
Jaroslav Kysela
85dd662ff4 ALSA: hda - move snd_hda_pcm_type_name from hda_codec.h to hda_local.h
The snd_hda_pcm_type_name array is local only.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16 14:14:28 +01:00
Dan Carpenter
80099c707e dereferencing freed memory regulator_fixed_voltage_remove()
Don't dereference drvdata after it has been freed.

regards,
dan carpenter

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-11-16 12:40:25 +00:00
Peter Zijlstra
559fdc3c1b perf_event: Optimize perf_output_lock()
The purpose of perf_output_{un,}lock() is to:

 1) avoid publishing incomplete data
    [ possible when publishing a head that is ahead of an entry
      that is still being written ]

 2) guarantee fwd progress
    [ a simple refcount on pending writers doesn't need to drop to
      0, making it so would end up implementing something like forced
      quiecent states of RCU ]

To satisfy the above without undue complexity it serializes
between CPUs, this means that a pending writer can only be the
same cpu in a nested context, and since (under normal operation)
a cpu always makes progress we're good -- if the head is only
published when the bottom  most writer completes.

Now we don't need to disable IRQs in order to serialize between
CPUs, disabling preemption ought to be sufficient, esp since we
already deal with nesting due to NMIs.

This avoids potentially expensive (and needless) local IRQ
disable/enable ops.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1258373161.26714.254.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-16 13:27:45 +01:00
Dmitry Eremin-Solenikov
0b4634fce1 leds-gpio: fix possible crash on OF device unbinding
If there are leds present in the OF tree, but the GPIOs for (some) of
them are unavailable, led_data doesn't get populated with correct
devices. Then, on device unbinding, one can crash the kernel.

Workaround this by setting led->gpio to invalid value early.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-11-16 11:50:42 +00:00
Pavel Machek
716bdf1874 backlight: Fix backlight limiting on spitz/corgi devices
On spitz (& similar) machines, if battery is running low, backlight
needs
to be limited to lower step.  Unfortunately, current code uses &= for
limiting, turning backlight off completely for some backlight settings.
Fix that.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-11-16 11:50:41 +00:00
Jean Delvare
1e0fa6bd8c backlight: lcd - Fix wrong sizeof
Which is why I have always preferred sizeof(struct foo) over
sizeof(var).

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-11-16 11:50:41 +00:00
Jean Delvare
84d2a314bb hwmon: (adt7475) Fix sysfs file names
The adt7475 driver creates pwm#_auto_channel_temp attributes instead
of the standard pwm#_auto_channels_temp. Fix it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
2009-11-16 12:45:40 +01:00
Jean Delvare
56e35eeebe hwmon: (adt7475) Cache limits for 60 seconds
The comment says that limits are cached for 60 seconds but the code
actually caches them for only 2 seconds. Align the code on the
comment, as 60 seconds makes more sense.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
2009-11-16 12:45:40 +01:00
Jean Delvare
cf312e0776 hwmon: (adt7475) Fix temperature fault flags
The logic of temperature fault flags is wrong, it shows faults when
there are none and vice versa. Fix it.

I can't believe this has been broken since the driver was added, 8
months ago, basically breaking temp1 and temp3, and nobody ever
complained.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
2009-11-16 12:45:39 +01:00
Ben Dooks
be4c23c93c hwmon: (s3c-hwmon) Ignore invalid divider settings
Avoid registering channels that have zero divider settings in them, as this
will only lead to kernel OOPS from divide-by-zero when the sysfs entry is
read.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-11-16 12:45:39 +01:00
Eric Dumazet
91e9c07bd6 net: Fix the rollback test in dev_change_name()
net: Fix the rollback test in dev_change_name()

In dev_change_name() an err variable is used for storing the original
call_netdevice_notifiers() errno (negative) and testing for a rollback
error later, but the test for non-zero is wrong, because the err might
have positive value as well - from dev_alloc_name(). It means the
rollback for a netdevice with a number > 0 will never happen. (The err
test is reordered btw. to make it more readable.)

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 03:30:35 -08:00
Takashi Iwai
828d44536c Merge branch 'fix/hda' into for-linus 2009-11-16 12:20:02 +01:00
Takashi Iwai
d019361a08 ALSA: hda - Add description of beep_mode in ALSA-Configuration.txt
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16 12:03:49 +01:00
Thomas Gleixner
411462f62a x86: Fix printk format due to variable type change
clockevents.mult became u32. Fix the printk format.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-11-16 11:55:20 +01:00
Stephen Rothwell
621a071f43 sparc: fix printk for change of variable type
The clockevent mult field became a u32.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20091116180118.aa1bf1e4.sfr@canb.auug.org.au>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-11-16 11:55:19 +01:00
Kristoffer Glembo
4309e5682d Added sparc_leon3_snooping_enabled() and converted extern inline to static inline
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 02:54:09 -08:00
Kristoffer Glembo
c000c71272 No auxio on LEON
Do not probe for auxio register on SPARC LEON.

Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 02:54:07 -08:00
Frank Blaschka
3fd434d846 qeth: allow dynamic change of rx checksumming
Technically there is no need to set the card offline to change
RX checksumming. Get rid of this stupid limitation.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 02:42:09 -08:00
Frank Blaschka
c3b4a740db qeth: rework TSO functions
The maximum TSO size OSA can handle is 15 * PAGE_SIZE. This
patch reduces gso_max_size to this value and adds some sanity
checks and statistics to the TSO implementation.
Since only layer 3 is able to do TSO move all TSO related functions
to the qeth_l3 module.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 02:42:08 -08:00
Ursula Braun
aa90922479 qeth: Recognize return codes of ccw_device_set_online
Setting a qeth device online requires to call function
ccw_device_set_online() for read-, write-, and data-subchannel.
Failures should be detected immediately without an attempt to
invoke follow-on activity qeth_qdio_clear_card().,

In addition, ccw_device_set_online calls are consolidated in
qeth_core_main.c only.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 02:42:07 -08:00
Ursula Braun
f20b04597b qeth: remaining EDDP cleanup
EDDP code has been removed from qeth in 2009. This patch removes two
useless remaining EDDP-references.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 02:42:06 -08:00
Einar Lueck
d64ecc22d0 qeth: Exploit Connection Isolation
Isolate data connection to a shared OSA card against other data
connections to the same OSA card. Connectivity between isolated
data connections sharing the same OSA card is therefore possible only
through external network gear (e.g. a router).

Signed-off-by: Einar Lueck <elelueck@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 02:42:05 -08:00
Takashi Iwai
9c96fa599f ALSA: hda - Get rid of magic digits for subdev hack
Define a proper const for a magic 31bit flag for subdev / NID setup
with a brief comment.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16 11:35:23 +01:00
Jaroslav Kysela
4d02d1b638 ALSA: hda - proc - add support for dynamic controls to mixer<->NID mapping
This patch adds support for dynamically created controls to proc codec file
(Control: lines).

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16 11:35:19 +01:00
Jaroslav Kysela
3911a4c19e ALSA: hda - proc - introduce Control: lines to show mixer<->NID assignment
This is an initial patch to show universal control<->NID assigment in
proc codec file. The change helps to debug codec related problems.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16 11:35:14 +01:00
Jaroslav Kysela
2dca0bba70 ALSA: hda - add beep_mode module parameter
The beep_mode parameter for snd-hda-intel module allows to choose among
different digital beep device registation to the input layer.

0 = do not register to the input layer
1 = register to the input layer all time
2 = use "Beep Switch" control exported to user space mixer applications

Also, introduce CONFIG_SND_HDA_INPUT_BEEP_MODE for default value.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16 11:35:10 +01:00
Jaroslav Kysela
5f81669750 ALSA: hda: beep - add missing cancel_delayed_work
The unregister work should be also canceled in snd_hda_detach_beep_device()
function.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16 11:35:05 +01:00
Jaroslav Kysela
13dab0808b ALSA: hda_intel: Digital PC Beep - delay input device unregistration
The massive register/unregister calls for input device layer might be
overkill. Delay unregister call by one HZ as workaround.

Also, as benefit, beep->enabled variable is changed immediately now
(not from workqueue).

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16 11:35:00 +01:00
Jaroslav Kysela
123c07aedd ALSA: hda_intel: Digital PC Beep - change behaviour for input layer
Original implementation was keeping registered input device for SND_BEEP
and SND_TONE events all time. This patch changes this behaviour:
If digital PC Beep is turned off using universal control switch,
the input device is unregistered.

Explanation: The kd_mksound() send SND_BEEP and SND_TONE only to last
registered device acceping those events. It means that the HDA Intel
audio driver blocks also the internal PC Speaker device (pcspkr.c
driver) even if the HDA Beep is muted. The user can easy disable
all beeps using 'setterm -blength 0' or 'xset b off' command.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16 11:34:41 +01:00
Takashi Iwai
fe705ab152 Merge branch 'topic/beep-rename' into topic/hda 2009-11-16 11:33:41 +01:00
Takashi Iwai
7d1794e81b Merge branch 'fix/hda' into topic/hda 2009-11-16 11:33:35 +01:00
Roel Kluin
9a767d43fb regulator: Fix check of unsigned return value and transmit errors in wm831x_gp_ldo_get_mode()
If ret is unsigned, the checks for negative wm831x_reg_read() return values
are wrong. The error value should be transmitted to its caller, e.g.
wm831x_gp_ldo_get_status() which tests for a negative return value.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-11-16 09:57:17 +00:00
Mark Brown
60ef66fcf4 regulator: Handle missing constraints in _regulator_disable()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-11-16 09:57:16 +00:00
Peter Zijlstra
047106adcc sched: Sched_rt_periodic_timer vs cpu hotplug
Heiko reported a case where a timer interrupt managed to
reference a root_domain structure that was already freed by a
concurrent hot-un-plug operation.

Solve this like the regular sched_domain stuff is also
synchronized, by adding a synchronize_sched() stmt to the free
path, this ensures that a root_domain stays present for any
atomic section that could have observed it.

Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Gregory Haskins <ghaskins@novell.com>
Cc: Siddha Suresh B <suresh.b.siddha@intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
LKML-Reference: <1258363873.26714.83.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-16 10:46:27 +01:00
Dan Carpenter
bf97402052 ALSA: ice1724 - make some bitfields unsigned
This is a clean up and doesn't change the behavior.

Bit fields should always be unsigned.  Otherwise pm_suspend_enabled will
be -1 when you want it to be 1.  The other bad thing is that the sparse
checker will complain 36 times if they aren't unsigned.

The other bitfields in that struct are unsigned already.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-16 10:13:13 +01:00
Hiroshi Shimamoto
62ad33f670 x86: Don't put iommu_shutdown_noop() in init section
It causes kernel panic on shutdown or reboot.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
LKML-Reference: <4B00BC8E.50801@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-16 08:58:51 +01:00
David S. Miller
e29d436317 Revert "isdn: isdn_ppp: Use SKB list facilities instead of home-grown implementation."
This reverts commit 38783e6713.

It causes kernel bugzilla #14594

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 22:23:47 -08:00
Marin Mitov
b9f5d52670 remove deprecated and not used: print_mac()
The function print_mac in net/ethernet/eth.c is marked __deprecated
and not used. Remove it.

Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 22:21:34 -08:00
Jay Vosburgh
2d6682db11 bonding: fix 802.3ad standards compliance error
The language of 802.3ad 43.4.9 requires the "recordPDU" function
to, in part, compare the Partner parameter values in a received LACPDU
to the stored Actor values.  If those match, then the Partner's
synchronization state is set to true.

	The current 802.3ad implementation is performing these steps out
of order; first, the synchronization check is done, then the paramters are
checked to see if they match (the synch check being done against a match
check of a prior LACPDU).  This causes delays in establishing aggregators
in some circumstances.

	This patch modifies the 802.3ad code to call __choose_matched,
the function that does the "match" comparisions, as the first step of
__record_pdu, instead of immediately afterwards.  This new behavior is
in compliance with the language of the standard.

	Some additional commentary relating to code vs. standard is also
added.

	Reported by Martin Patterson <martin@gear6.com> who also supplied
the logic of the fix and verified the patch.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 22:21:34 -08:00
Eric Dumazet
b93ab837a2 vlan: Use __vlan_hwaccel_put_tag() in rx
Commit 05423b2413 (vlan: allow null VLAN ID to be used)
forgot to update __vlan_hwaccel_rx() & vlan_gro_common()

We need to set VLAN_TAG_PRESENT flag in skb->vlan_tci

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 22:21:33 -08:00
Sriram
5bfa2a17f2 TI Davinci EMAC : Fix Console Hang when bringing the interface down
In the NAPI poll function(emac_poll), check for netif_running()
is unnecassary. In addition to associated runtime overhead, it
also results in a continuous softirq loop when the interface is
brought down under heavy traffic(tested wit Traffic Generator).
Once the interface is disabled, the poll function always returns
zero(with the check for netif_running) and napi_complete() would
never get called resulting in softirq loop.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Acked-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 22:17:43 -08:00
Sriram
f88c5b9887 smsc911x: Fix Console Hang when bringing the interface down.
In the NAPI poll function, check for netif_running() is unnecassary.
In addition to associated runtime overhead, it also results in
continuous softirq loop when the interface is brought down under heavy
traffic(tested with Traffic Generator).Once the interface is disabled,
the poll function always returns zero(with the check for netif_running)
and napi_complete() would never get called resulting in softirq loop.

Signed-off-by: Sriramakrishnan <srk@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 22:17:41 -08:00
Matt Carlson
c5d5d17217 tg3: Update version to 3.104
This patch updates the tg3 version to 3.104.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 22:14:55 -08:00
Matt Carlson
5001e2f638 tg3: Fix DIDs, Enable 5717 support
This patch fixes the 5717 variant device ID enumerations and adds those
DIDs to the PCI ID table.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 22:14:54 -08:00
Matt Carlson
b196c7e45f tg3: Add rx prod ring consolidation
This patch adds code to funnel each MSI-X vector's rx packet buffers
into a single set of producer rings which will then be submitted to the
hardware.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 22:14:54 -08:00
Matt Carlson
66711e6663 tg3: Create aliases for rx producer mailbox regs
The rx producer mailbox registers are used in several spots in the code.
The addition of TG3_64BIT_REG_LOW makes register references
uncomfortably long.  This patch creates an alias for the standard and
jumbo ring producer index registers to make the code cleaner.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 22:14:53 -08:00
Matt Carlson
2b2cdb65be tg3: Lay proucer ring handling groundwork
The patch increases the number of producer rings available and
implements the constructor and destructor code that deals with them.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 22:14:51 -08:00
Matt Carlson
4361935afe tg3: Consider rx_std_prod_idx a hw mailbox
This patch changes how the code uses the rx_std_prod_idx member.  In the
following patch, the code will be changed so that it will act just like
a hardware mailbox.  This patch prepares the code so that memory barriers
can be more easily inserted.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 22:14:50 -08:00
Matt Carlson
411da6407e tg3: rename rx_[std|jmb]_ptr
A later patch is going to add consumer indicies for the producer rings.
To keep things readable, this patch renames rx_[std|jmb]_ptr to
rx_[std|jmb]_prod_idx.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-15 22:14:49 -08:00