Commit graph

211,079 commits

Author SHA1 Message Date
Heiko Schocher
371bc96b89 mpc5200: support for the MAN mpc5200 based board uc101
- serial Console on PSC1
- 64MB SDRAM
- MTD CFI Flash
- Ethernet FEC
- I2C with PCF8563 and Temp. Sensor ADM9240
- IDE support

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-10-15 09:29:32 -06:00
Cyrill Gorcunov
f88f2b4fdb x86: apic: Allow noop operations to be called almost at any time
As only apic noop is used we allow to use almost any operation
caller wants (and which of them noop driver supports of
course).

Initially it was reported by Ingo Molnar that apic noop
issue a warning for pkg id (which is actually false positive
and should be eliminated).

So we save checking (and warning issue) for read/write
operations while allow any other ops to be freely used.

Also:
 - fix noop_cpu_to_logical_apicid, it should be 0.
 - rename noop_default_phys_pkg_id to noop_phys_pkg_id
   (we use default_ prefix for more general routines
    in apic subsystem).

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
LKML-Reference: <20091015150416.GC5331@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 17:26:53 +02:00
Santosh Shilimkar
daaeb6c938 ARM: 5763/1: ARM: SMP: Fix the BUG with CONFIG_PREEMPT enabled
This patch fixes the BUG: using smp_processor_id() in preemptible
Below is the stripped backtrace.

BUG: using smp_processor_id() in preemptible [00000000] code: init/1
caller is flush_tlb_mm+0x44/0x70
Backtrace:
[<c00225c4>] (dump_backtrace+0x0/0x110) from [<c01713a0>] (dump_stack+0x18/0x1c)
 r7:00000000 r6:c00234f0 r5:00000001 r4:c7828000
[<c0171388>] (dump_stack+0x0/0x1c) from [<c0135364>] (debug_smp_processor_id+0xc0/0xf0)
[<c01352a4>] (debug_smp_processor_id+0x0/0xf0) from [<c00234f0>] (flush_tlb_mm+0x44/0x70)
 r7:00000000 r6:c60b41a0 r5:c60b4154 r4:00000001
[<c00234ac>] (flush_tlb_mm+0x0/0x70) from [<c0039568>] (dup_mm+0x304/0x38c)
 r5:c1f09058 r4:00000000
[<c0039264>] (dup_mm+0x0/0x38c) from [<c0039de4>] (copy_process+0x7b8/0xeb0)
[<c003962c>] (copy_process+0x0/0xeb0) from [<c003a638>] (do_fork+0x15c/0x29c)
[<c003a4dc>] (do_fork+0x0/0x29c) from [<c0021df0>] (sys_clone+0x34/0x3c)
[<c0021dbc>] (sys_clone+0x0/0x3c) from [<c001efa0>] (ret_fast_syscall+0x0/0x2c)

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-15 15:45:15 +01:00
Mark Brown
3da8e6885e Merge branch 'for-2.6.32' into for-2.6.33 2009-10-15 15:02:14 +01:00
Peter Ujfalusi
c8bf93f0fe ASoC: Codec driver for Texas Instruments tlv320dac33 codec
Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo
audio DAC.

TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low
power audio playback.

The digital interface can use I2S, DSP (A or B), Right and Left
justified formats.
DAC33 has stereo analog input, which can be bypassed to the analog
outputs.

Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass'
mode (default) and nSample mode (FIFO is in use).
a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is
working synchronously as a normal codec (it needs constant stream of
data on the digital interface).

b) The nSample mode implementation uses one interrupt line from DAC33 to
the host:
Alarm threshold is set to 10ms of audio data (limit by the driver
implementation).
DAC33 will signal an interrupt, when the FIFO level goes under the
Alarm threshold.
The host will write to nSample register a value (number of stereo
samples), to tell DAC33 how many samples it should read in a burst from
the host. When the DAC33 received the number of samples, it disables the
clocks on the I2S bus. When the FIFO use again goes under the Alarm
threshold, DAC33 signals the host with an interrupt, and the process is
repeated.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 15:02:04 +01:00
Igor Grinberg
640fb39e38 ASoC: finally enable support for eXeda and CM-X300
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
CC: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: alsa-devel@alsa-project.org
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 15:01:47 +01:00
Mark Brown
d2058b0cd0 ASoC: Remove snd_soc_suspend_device()
The PM core will grow pm_link infrastructure in 2.6.33 which can be
used to implement the intended functionality of the ASoC-specific
device suspend and resume callbacks so drop them.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-15 15:01:43 +01:00
Jonathan Corbet
1243ba98e3 Update flex_arrays.txt
The 2.6.32 merge window brought a number of changes to the flexible array
API; this patch updates the documentation to match the new state of
affairs.

Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2009-10-15 07:25:20 -06:00
Russell King
e85d380710 Merge branch 'for-rmk-rc' of git://git.pengutronix.de/git/imx/linux-2.6 2009-10-15 12:11:51 +01:00
Ingo Molnar
434a83c3fb events: Harmonize event field names and print output names
Now that we can filter based on fields via perf record, people
will start using filter expressions and will expect them to
be obvious.

The primary way to see which fields are available is by looking
at the trace output, such as:

  gcc-18676 [000]   343.011728: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.012727: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.032692: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.033690: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.034687: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.035686: irq_handler_entry: irq=0 handler=timer
  cc1-18677 [000]   343.036684: irq_handler_entry: irq=0 handler=timer

While 'irq==0' filters work, the 'handler==<x>' filter expression
does not work:

  $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1
   Error: failed to set filter with 22 (Invalid argument)

The problem is that while an 'irq' field exists and is recognized
as a filter field - 'handler' does not exist - its name is 'name'
in the output.

To solve this, we need to synchronize the printout and the field
names, wherever possible.

In cases where the printout prints a non-field, we enclose
that information in square brackets, such as:

  perf-1380  [013]   724.903505: softirq_exit: vec=9 [action=RCU]
  perf-1380  [013]   724.904482: softirq_exit: vec=1 [action=TIMER]

This way users can use filter expressions more intuitively: all
fields that show up as 'primary' (non-bracketed) information is
filterable.

This patch harmonizes the field names for all irq, bkl, power,
sched and timer events.

We might in fact think about dropping the print format bit of
generic tracepoints altogether, and just print the fields that
are being recorded.

Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 12:42:03 +02:00
Ingo Molnar
a66abe7fbf tracing/events: Fix locking imbalance in the filter code
Américo Wang noticed that we have a locking imbalance in the
error paths of ftrace_profile_set_filter(), causing potential
leakage of event_mutex.

Also clean up other error codepaths related to event_mutex
while at it.

Plus fix an initialized variable in the subsystem filter code.

Reported-by: Américo Wang <xiyou.wangcong@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <2375c9f90910150247u5ccb8e2at58c764e385ffa490@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 12:41:56 +02:00
Li Zefan
c171b552a7 perf trace: Add filter Suppport
Add a new option "--filter <filter_str>" to perf record, and
it should be right after "-e trace_point":

 #./perf record -R -f -e irq:irq_handler_entry --filter irq==18
 ^C
 # ./perf trace
            perf-4303  ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0
            init-0     ... irq_handler_entry: irq=18 handler=eth0

See Documentation/trace/events.txt for the syntax of filter
expressions.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD6955F.90602@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:35:23 +02:00
Li Zefan
6fb2915df7 tracing/profile: Add filter support
- Add an ioctl to allocate a filter for a perf event.

- Free the filter when the associated perf event is to be freed.

- Do the filtering in perf_swevent_match().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69546.8050401@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:35:23 +02:00
Li Zefan
b0f1a59a98 tracing/filters: Use a different op for glob match
"==" will always do a full match, and "~" will do a glob match.

In the future, we may add "=~" for regex match.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69528.3050309@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:35:22 +02:00
Li Zefan
fce29d15b5 tracing/filters: Refactor subsystem filter code
Change:
	for_each_pred
		for_each_subsystem
To:
	for_each_subsystem
		for_each_pred

This change also prepares for later patches.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69502.8060903@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:35:22 +02:00
Ingo Molnar
713490e02e Merge branch 'tracing/core' into perf/core
Merge reason: to add event filter support we need the following
commits from the tracing tree:

 3f6fe06: tracing/filters: Unify the regex parsing helpers
 1889d20: tracing/filters: Provide basic regex support
 737f453: tracing/filters: Cleanup useless headers

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:34:00 +02:00
Paul E. McKenney
0edf1a683e rcu: Update trace.txt documentation for blocked-tasks lists
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
Cc: npiggin@suse.de
Cc: jens.axboe@oracle.com
LKML-Reference: <12555405592804-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:20:23 +02:00
Paul E. McKenney
bd58b43003 rcu: Update trace.txt documentation to reflect recent changes
o	Remove the CONFIG_PREEMPT_RCU documentation since this
	config option has now been removed.

o	Change the now-incorrect references to "rcu" labels to
	instead be "rcu_sched".

o	Add notes stating that CONFIG_TREE_PREEMPT_RCU kernels will
	have additional "rcu_preempt" output.

o	Note the new "oqlen" field in the rcuhier output (for
	RCU callbacks orphaned by an offlined CPU).

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
Cc: npiggin@suse.de
Cc: jens.axboe@oracle.com
LKML-Reference: <1255540559799-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:20:23 +02:00
Paul E. McKenney
3397e040df rcu: Add rnp->blocked_tasks to tracing
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
Cc: npiggin@suse.de
Cc: jens.axboe@oracle.com
Cc: Josh Triplett <josh@joshtriplett.org>
LKML-Reference: <20091014233638.GE6763@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
 kernel/rcutree_trace.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
2009-10-15 11:20:22 +02:00
Paul E. McKenney
019129d595 rcu: Stopgap fix for synchronize_rcu_expedited() for TREE_PREEMPT_RCU
For the short term, map synchronize_rcu_expedited() to
synchronize_rcu() for TREE_PREEMPT_RCU and to
synchronize_sched_expedited() for TREE_RCU.

Longer term, there needs to be a real expedited grace period for
TREE_PREEMPT_RCU, but candidate patches to date are considerably
more complex and intrusive.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
Cc: npiggin@suse.de
Cc: jens.axboe@oracle.com
LKML-Reference: <12555405592331-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:17:17 +02:00
Paul E. McKenney
37c72e56f6 rcu: Prevent RCU IPI storms in presence of high call_rcu() load
As the number of callbacks on a given CPU rises, invoke
force_quiescent_state() only every blimit number of callbacks
(defaults to 10,000), and even then only if no other CPU has
invoked force_quiescent_state() in the meantime.

This should fix the performance regression reported by Nick.

Reported-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
Cc: jens.axboe@oracle.com
LKML-Reference: <12555405592133-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 11:17:16 +02:00
Steven Rostedt
c4dc775f53 perf tools: Remove all char * typecasts and use const in prototype
The (char *) for all the static strings was a fix for the
symptom and not the disease. The real issue was that the
function prototypes needed to be declared "const char *".

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.635935008@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 10:43:17 +02:00
Steven Rostedt
afdf1a404e perf tools: Handle - and + in parsing trace print format
The opterators '-' and '+' are not handled in the trace print
format.

To do: '++' and '--'.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.330843045@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 10:42:40 +02:00
Steven Rostedt
cda48461c7 perf tools: Add latency format to trace output
Add the irqs disabled, preemption count, need resched, and other
info that is shown in the latency format of ftrace.

 # perf trace -l
    perf-16457   2..s2. 53636.260344: kmem_cache_free: call_site=ffffffff811198f
    perf-16457   2..s2. 53636.264330: kmem_cache_free: call_site=ffffffff811198f
    perf-16457   2d.s4. 53636.300006: kmem_cache_free: call_site=ffffffff810d889

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194400.076588953@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 10:42:39 +02:00
Steven Rostedt
0d1da915c7 perf tools: Handle both versions of ftrace output
The ftrace output events can have either arguments or no
arguments. The parser needs to be able to handle both.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.790221427@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 10:42:39 +02:00
Steven Rostedt
ffa1895561 perf tools: Fix bprintk reading in trace output
The bprintk parsing was broken in more ways than one.

The file parsing was incorrect, and the words used by the
arguments are always 4 bytes aligned, even on 64-bit machines.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.520931637@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 10:42:38 +02:00
Steven Rostedt
07a4bdddcf perf tools: Still continue on failed parsing of an event
Even though an event may fail to parse, we should not kill the
entire report. The trace should still be able to show what it
can.

If an event fails to parse, a warning is printed, and the output
continues.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194359.190809589@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 10:42:38 +02:00
Steven Rostedt
13999e5934 perf tools: Handle the case with and without the "signed" trace field
The trace format files now have a "signed" field. But we should
still be able to handle the kernels that do not have this field.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.888239553@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 10:42:37 +02:00
Steven Rostedt
f1d1feecf0 perf tools: Handle newlines in trace parsing better
New lines between args in the trace format can break the
parsing. This should not be the case.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.637991808@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 10:42:37 +02:00
Steven Rostedt
b99af87482 perf tools: Handle * as typecast in trace parsing
The '*' is currently only treated as a multiplication, and it
needs to be handled as a typecast pointer.

This is the version used by trace-cmd.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.409327875@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 10:42:36 +02:00
Steven Rostedt
0959b8d65c perf tools: Handle arrays in print fields for trace parsing
The array used by the ftrace stack events (caller[x]) causes
issues with the parser. This adds code to handle the case, but
it also assumes that the array is of type long.

Note, this is a special case used (currently) only by the ftrace
user and kernel stack records.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194358.124833639@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 10:42:36 +02:00
Steven Rostedt
298ebc3ef2 perf tools: Handle trace parsing of < and >
The code to handle the '<' and '>' ops was all in place, but
they were not in the switch statement to consider them as valid
ops.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194357.807434040@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 10:42:35 +02:00
Steven Rostedt
91ff2bc191 perf tools: Fix backslash processing on trace print formats
The handling of backslashes was broken. It would stop parsing
when encountering one. Also, '\n', '\t', '\r' and '\\' were not
converted.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194357.521974680@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 10:42:35 +02:00
Steven Rostedt
924a79af2c perf tools: Handle print concatenations in event format file
kmem_alloc ftrace event format had a string that was broken up
by two tokens. "string 1" "string 2". This patch lets the parser
be able to handle the concatenation.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091014194357.253818714@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 10:42:34 +02:00
Eilon Greenstein
b2d76447df bnx2x: Update to version 1.52.1-1
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15 00:19:31 -07:00
Eilon Greenstein
35c5f8fef1 bnx2x: Report the maximal available BW as link speed
The device is limited to the maximal BW allocation, so it should be displayed as
the link speed to notify the user.

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15 00:19:05 -07:00
Eilon Greenstein
061bc702f6 bnx2x: Do not call load/unload functionality from DCC
There is really no need to clear the MAC or the FW filtering rules - it was
added for completion, but caused race conditions with load/unload. Removing this
redundant code

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15 00:18:47 -07:00
Eilon Greenstein
c4ff7cbf88 bnx2x: Adding FW mailbox mutex
DCC commands are not protected with the RTNL lock, so a mutex should be added

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15 00:18:27 -07:00
Eilon Greenstein
f34d28ea01 bnx2x: Changing the Disabled state to a flag
When working with DCC, a function can be disabled or enabled (virtual link down
or up). Using the function state introduced some race conditions with the
load/unload flow.
Using a separate flag to indicate that the function is disabled.

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15 00:18:08 -07:00
Eilon Greenstein
52a7a12fb5 bnx2x: Remove old FW files
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15 00:17:45 -07:00
Eilon Greenstein
b015e3d112 bnx2x: Allowing 0 as initial fairness value
Value of zero was used to disable the fairness mechanism. Though the code
(driver and FW) allowed changing the value at run time, it did not allow to do
that if the mechanism was disabled to begin with.
Fixed the FW to allow turning on and off the mechanism at run time. Fixed the
code to read the value from the chip at the right sequence.
Without this fix, if the initial value was set to zero, traffic could not run on
the interface.

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15 00:17:20 -07:00
Eilon Greenstein
69dc2df3aa bnx2x: Add FW 5.2.7
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15 00:16:27 -07:00
Ingo Molnar
b226f744d4 Merge branch 'linus' into perf/core
Merge reason: pick up tools/perf/ changes from upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 08:44:44 +02:00
Eric Dumazet
ed79bab847 virtio_net: use dev_kfree_skb_any() in free_old_xmit_skbs()
Because netpoll can call netdevice start_xmit() method with
irqs disabled, drivers should not call kfree_skb() from
their start_xmit(), but use dev_kfree_skb_any() instead.

Oct  8 11:16:52 172.30.1.31 [113074.791813] ------------[ cut here ]------------
Oct  8 11:16:52 172.30.1.31 [113074.791813] WARNING: at net/core/skbuff.c:398 \
                skb_release_head_state+0x64/0xc8()
Oct  8 11:16:52 172.30.1.31 [113074.791813] Hardware name:
Oct  8 11:16:52 172.30.1.31 [113074.791813] Modules linked in: netconsole ocfs2 jbd2 quota_tree \
ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs crc32c drbd cn loop \
serio_raw psmouse snd_pcm snd_timer snd soundcore snd_page_alloc virtio_net pcspkr parport_pc parport \
i2c_piix4 i2c_core button processor evdev ext3 jbd mbcache dm_mirror dm_region_hash dm_log dm_snapshot \
dm_mod ide_cd_mod cdrom ata_generic ata_piix virtio_blk libata scsi_mod piix ide_pci_generic ide_core \
                virtio_pci virtio_ring virtio floppy thermal fan thermal_sys [last unloaded: netconsole]
Oct  8 11:16:52 172.30.1.31 [113074.791813] Pid: 11132, comm: php5-cgi Tainted: G        W  \
                2.6.31.2-vserver #1
Oct  8 11:16:52 172.30.1.31 [113074.791813] Call Trace:
Oct  8 11:16:52 172.30.1.31 [113074.791813] <IRQ>  [<ffffffff81253cd5>] ? \
                skb_release_head_state+0x64/0xc8
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81253cd5>] ? skb_release_head_state+0x64/0xc8
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81049ae1>] ? warn_slowpath_common+0x77/0xa3
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81253cd5>] ? skb_release_head_state+0x64/0xc8
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81253a1a>] ? __kfree_skb+0x9/0x7d
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffffa01cb139>] ? free_old_xmit_skbs+0x51/0x6e \
                [virtio_net]
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffffa01cbc85>] ? start_xmit+0x26/0xf2 [virtio_net]
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8126934f>] ? netpoll_send_skb+0xd2/0x205
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffffa0429216>] ? write_msg+0x90/0xeb [netconsole]
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81049f06>] ? __call_console_drivers+0x5e/0x6f
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8102b49d>] ? kvm_clock_read+0x4d/0x52
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8104a082>] ? release_console_sem+0x115/0x1ba
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8104a632>] ? vprintk+0x2f2/0x34b
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8106b142>] ? vx_update_load+0x18/0x13e
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81308309>] ? printk+0x4e/0x5d
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff8102b49d>] ? kvm_clock_read+0x4d/0x52
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81070b62>] ? getnstimeofday+0x55/0xaf
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81062683>] ? ktime_get_ts+0x21/0x49
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff810626b7>] ? ktime_get+0xc/0x41
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81062788>] ? hrtimer_interrupt+0x9c/0x146
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81024a4b>] ? smp_apic_timer_interrupt+0x80/0x93
Oct  8 11:16:52 172.30.1.31 [113074.791813] [<ffffffff81011663>] ? apic_timer_interrupt+0x13/0x20
Oct  8 11:16:52 172.30.1.31 [113074.791813] <EOI>  [<ffffffff8130a9eb>] ? _spin_unlock_irq+0xd/0x31

Reported-and-tested-by: Massimo Cetra <mcetra@navynet.it>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Bug-Entry: http://bugzilla.kernel.org/show_bug.cgi?id=14378
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14 23:29:56 -07:00
Sathya Perla
43a04fdc36 be2net: fix support for PCI hot plug
Before issuing any cmds to the FW, the driver must first wait
till the fW becomes ready. This is needed for PCI hot plug when
the driver can be probed while the card fw is being initialized.

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14 23:29:56 -07:00
Sathya Perla
73d540f282 be2net: fix promiscuous and multicast promiscuous modes being enabled always
Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14 23:29:54 -07:00
Ingo Molnar
db8590f504 Revert "x86: linker script syntax nits"
This reverts commit e9a63a4e55.

This breaks older binutils, where sink-less asserts are broken.

See this commit for further details:

  d2ba8b2: x86: Fix assert syntax in vmlinux.lds.S

Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4AD6523D.5030909@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 08:09:55 +02:00
Ingo Molnar
a0738a688d Merge branch 'linus' into x86/urgent
Merge reason: pull in latest, to be able to revert a patch there.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 08:07:30 +02:00
Alex Deucher
1b4d7d75cc drm/radeon/kms: fix internal tmds setup on legacy display engine
- crtc 0 routing was wrong
- need to clear various timing bits in FP_GEN_CNTL
- need to set FP_H/V2_SYNC_STRT_WID regs for crtc 1

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-15 15:33:46 +10:00
Len Brown
d59733c1e5 Merge branch 'misc' into release 2009-10-15 00:47:13 -04:00