Commit graph

211,079 commits

Author SHA1 Message Date
Alexander Duyck
26ad91783c igb: add combined function for setting rar and pool bits
This patch adds igb_rar_qsel which sets the mac address and pool bits for a
given mac address in the receive address register table.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06 14:59:18 -07:00
Alexander Duyck
bf6f7a928d igb: add locking to reads of the i2c interface
The current implementation of sgmii support isn't correctly locking the
interfaces for reads/writes.  This change pulls the read/write
functionality out of 82575.c and moves it to phy.c.  In addition it
replaces the implementation in 82575.c with one that uses locking around
the relocated i2c interface calls.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06 14:59:18 -07:00
Alexander Duyck
008c3422d4 igb: update the approach taken to acquiring and releasing the phy lock
The current approach is just using a ?: type mechanism to set the phy
locking bit.  This if fine for now but limits us to only 2.  Switch to a
nested if statement for future compatiblity with more than 2 phys.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06 14:59:17 -07:00
Alexander Duyck
70d92f86dc igb: update comments for serdes config and update to handle duplex
This update corrects the driver so that it handles duplex for serdes links
correctly instead of just forcing full duplex always.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06 14:59:16 -07:00
Alexander Duyck
cc9073bbc9 igb: remove unused temp variable from stats clearing path
There is a temp variable in the stats clearing path that isn't needed since
the results from the stats read can be immediately discared.  Since it
isn't needed we might as well just drop it from the function call.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06 14:59:16 -07:00
Trond Myklebust
517be09def NFSv4: Fix the referral mount code
Fix a typo which causes try_location() to use the wrong length argument
when calling nfs_parse_server_name(). This again, causes the initialisation
of the mount's sockaddr structure to fail.

Also ensure that if nfs4_pathname_string() returns an error, then we pass
that error back up the stack instead of ENOENT.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-10-06 15:42:20 -04:00
Ben Hutchings
f4373bf9e6 nfs: Avoid overrun when copying client IP address string
As seen in <http://bugs.debian.org/549002>, nfs4_init_client() can
overrun the source string when copying the client IP address from
nfs_parsed_mount_data::client_address to nfs_client::cl_ipaddr.  Since
these are both treated as null-terminated strings elsewhere, the copy
should be done with strlcpy() not memcpy().

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-10-06 15:42:18 -04:00
Trond Myklebust
bcd2ea17da NFS: Fix port initialisation in nfs_remount()
The recent changeset 53a0b9c4c9 (NFS: Replace
nfs_parse_ip_address() with rpc_pton()) broke nfs_remount, since the call
to rpc_pton() will zero out the port number in data->nfs_server.address.

This is actually due to a bug in nfs_remount: it should be looking at the
port number in nfs_server.port instead...

This fixes bug
   http://bugzilla.kernel.org/show_bug.cgi?id=14276

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-10-06 15:41:22 -04:00
Trond Myklebust
f5855fecda NFS: Fix port and mountport display in /proc/self/mountinfo
Currently, the port and mount port will both display as 65535 if you do not
specify a port number. That would be wrong...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-10-06 15:40:37 -04:00
Trond Myklebust
c5811dbdd2 NFS: Fix a default mount regression...
With the recent spate of changes, the nfs protocol version will now default
to 2 instead of 3, while the mount protocol version defaults to 3.

The following patch should ensure the defaults are consistent with the
previous defaults of vers=3,proto=tcp,mountvers=3,mountproto=tcp.

This fixes the bug
   http://bugzilla.kernel.org/show_bug.cgi?id=14259

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-10-06 15:40:15 -04:00
Sage Weil
e324b8f991 ceph: document shared files in README
Document files shared between kernel and user code trees.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 12:21:17 -07:00
Jens Axboe
b9c8946b19 cfq-iosched: fix the slice residual sign
We should subtract the slice residual from the rb tree key, since
a negative residual count indicates that the cfqq overran its slice
the last time. Hence we want to add the overrun time, to position
it a bit further away in the service tree.

Reported-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06 21:09:32 +02:00
Jens Axboe
0b182d617e cfq-iosched: abstract out the 'may this cfqq dispatch' logic
Makes the whole thing easier to read, cfq_dispatch_requests() was
a bit messy before.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06 20:49:37 +02:00
Steve French
8347a5cdd1 [CIFS] Fixing to avoid invalid kfree() in cifs_get_tcp_session()
trivial bug in fs/cifs/connect.c .
The bug is caused by fail of extract_hostname()
when mounting cifs file system.

This is the situation when I noticed this bug.

% sudo mount -t cifs //192.168.10.208 mountpoint -o options...

Then my kernel says,

[ 1461.807776] ------------[ cut here ]------------
[ 1461.807781] kernel BUG at mm/slab.c:521!
[ 1461.807784] invalid opcode: 0000 [#2] PREEMPT SMP
[ 1461.807790] last sysfs file:
/sys/devices/pci0000:00/0000:00:1e.0/0000:09:02.0/resource
[ 1461.807793] CPU 0
[ 1461.807796] Modules linked in: nls_iso8859_1 usbhid sbp2 uhci_hcd
ehci_hcd i2c_i801 ohci1394 ieee1394 psmouse serio_raw pcspkr sky2 usbcore
evdev
[ 1461.807816] Pid: 3446, comm: mount Tainted: G      D 2.6.32-rc2-vanilla
[ 1461.807820] RIP: 0010:[<ffffffff810b888e>]  [<ffffffff810b888e>]
kfree+0x63/0x156
[ 1461.807829] RSP: 0018:ffff8800b4f7fbb8  EFLAGS: 00010046
[ 1461.807832] RAX: ffffea00033fff98 RBX: ffff8800afbae7e2 RCX:
0000000000000000
[ 1461.807836] RDX: ffffea0000000000 RSI: 000000000000005c RDI:
ffffffffffffffea
[ 1461.807839] RBP: ffff8800b4f7fbf8 R08: 0000000000000001 R09:
0000000000000000
[ 1461.807842] R10: 0000000000000000 R11: ffff8800b4f7fbf8 R12:
00000000ffffffea
[ 1461.807845] R13: ffff8800afb23000 R14: ffff8800b4f87bc0 R15:
ffffffffffffffea
[ 1461.807849] FS:  00007f52b6f187c0(0000) GS:ffff880007600000(0000)
knlGS:0000000000000000
[ 1461.807852] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1461.807855] CR2: 0000000000613000 CR3: 00000000af8f9000 CR4:
00000000000006f0
[ 1461.807858] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 1461.807861] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 1461.807865] Process mount (pid: 3446, threadinfo ffff8800b4f7e000, task
ffff8800950e4380)
[ 1461.807867] Stack:
[ 1461.807869]  0000000000000202 0000000000000282 ffff8800b4f7fbf8
ffff8800afbae7e2
[ 1461.807876] <0> 00000000ffffffea ffff8800afb23000 ffff8800b4f87bc0
ffff8800b4f7fc28
[ 1461.807884] <0> ffff8800b4f7fcd8 ffffffff81159f6d ffffffff81147bc2
ffffffff816bfb48
[ 1461.807892] Call Trace:
[ 1461.807899]  [<ffffffff81159f6d>] cifs_get_tcp_session+0x440/0x44b
[ 1461.807904]  [<ffffffff81147bc2>] ? find_nls+0x1c/0xe9
[ 1461.807909]  [<ffffffff8115b889>] cifs_mount+0x16bc/0x2167
[ 1461.807917]  [<ffffffff814455bd>] ? _spin_unlock+0x30/0x4b
[ 1461.807923]  [<ffffffff81150da9>] cifs_get_sb+0xa5/0x1a8
[ 1461.807928]  [<ffffffff810c1b94>] vfs_kern_mount+0x56/0xc9
[ 1461.807933]  [<ffffffff810c1c64>] do_kern_mount+0x47/0xe7
[ 1461.807938]  [<ffffffff810d8632>] do_mount+0x712/0x775
[ 1461.807943]  [<ffffffff810d671f>] ? copy_mount_options+0xcf/0x132
[ 1461.807948]  [<ffffffff810d8714>] sys_mount+0x7f/0xbf
[ 1461.807953]  [<ffffffff8144509a>] ? lockdep_sys_exit_thunk+0x35/0x67
[ 1461.807960]  [<ffffffff81011cc2>] system_call_fastpath+0x16/0x1b
[ 1461.807963] Code: 00 00 00 00 ea ff ff 48 c1 e8 0c 48 6b c0 68 48 01 d0
66 83 38 00 79 04 48 8b 40 10 66 83 38 00 79 04 48 8b 40 10 80 38 00 78 04
<0f> 0b eb fe 4c 8b 70 58 4c 89 ff 41 8b 76 4c e8 b8 49 fb ff e8
[ 1461.808022] RIP  [<ffffffff810b888e>] kfree+0x63/0x156
[ 1461.808027]  RSP <ffff8800b4f7fbb8>
[ 1461.808031] ---[ end trace ffe26fcdc72c0ce4 ]---

The reason of this bug is that the error handling code of
cifs_get_tcp_session()
calls kfree() when corresponding kmalloc() failed.
(The kmalloc() is called by extract_hostname().)

Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
CC: Stable <stable@kernel.org>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-10-06 18:31:29 +00:00
Sage Weil
9030aaf9bf ceph: Kconfig, Makefile
Kconfig options and Makefile.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:15 -07:00
Sage Weil
76aa844d5b ceph: debugfs
Basic state information is available via /sys/kernel/debug/ceph,
including instances of the client, fsids, current monitor, mds and osd
maps, outstanding server requests, and hooks to adjust debug levels.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:14 -07:00
Sage Weil
8f4e91dee2 ceph: ioctls
A few Ceph ioctls for getting and setting file layout (striping)
parameters, and learning the identity and network address of the OSD a
given region of a file is stored on.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:14 -07:00
Sage Weil
a8e63b7d51 ceph: nfs re-export support
Basic NFS re-export support is included.  This mostly works.  However,
Ceph's MDS design precludes the ability to generate a (small)
filehandle that will be valid forever, so this is of limited utility.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
Sage Weil
8fc91fd859 ceph: message pools
The msgpool is a basic mempool_t-like structure to preallocate
messages we expect to receive over the wire.  This ensures we have the
necessary memory preallocated to process replies to requests, or to
process unsolicited messages from various servers.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
Sage Weil
31b8006e1d ceph: messenger library
A generic message passing library is used to communicate with all
other components in the Ceph file system.  The messenger library
provides ordered, reliable delivery of messages between two nodes in
the system.

This implementation is based on TCP.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:13 -07:00
Sage Weil
963b61eb04 ceph: snapshot management
Ceph snapshots rely on client cooperation in determining which
operations apply to which snapshots, and appropriately flushing
snapshotted data and metadata back to the OSD and MDS clusters.
Because snapshots apply to subtrees of the file hierarchy and can be
created at any time, there is a fair bit of bookkeeping required to
make this work.

Portions of the hierarchy that belong to the same set of snapshots
are described by a single 'snap realm.'  A 'snap context' describes
the set of snapshots that exist for a given file or directory.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:12 -07:00
Sage Weil
a8599bd821 ceph: capability management
The Ceph metadata servers control client access to inode metadata and
file data by issuing capabilities, granting clients permission to read
and/or write both inode field and file data to OSDs (storage nodes).
Each capability consists of a set of bits indicating which operations
are allowed.

If the client holds a *_SHARED cap, the client has a coherent value
that can be safely read from the cached inode.

In the case of a *_EXCL (exclusive) or FILE_WR capabilities, the client
is allowed to change inode attributes (e.g., file size, mtime), note
its dirty state in the ceph_cap, and asynchronously flush that
metadata change to the MDS.

In the event of a conflicting operation (perhaps by another client),
the MDS will revoke the conflicting client capabilities.

In order for a client to cache an inode, it must hold a capability
with at least one MDS server.  When inodes are released, release
notifications are batched and periodically sent en masse to the MDS
cluster to release server state.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:12 -07:00
Sage Weil
ba75bb98cf ceph: monitor client
The monitor cluster is responsible for managing cluster membership
and state.  The monitor client handles what minimal interaction
the Ceph client has with it: checking for updated versions of the
MDS and OSD maps, getting statfs() information, and unmounting.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:11 -07:00
Sage Weil
5ecc0a0f81 ceph: CRUSH mapping algorithm
CRUSH is a pseudorandom data distribution function designed to map
inputs onto a dynamic hierarchy of devices, while minimizing the
extent to which inputs are remapped when the devices are added or
removed.  It includes some features that are specifically useful for
storage, most notably the ability to map each input onto a set of N
devices that are separated across administrator-defined failure
domains.  CRUSH is used to distribute data across the cluster of Ceph
storage nodes.

More information about CRUSH can be found in this paper:

    http://www.ssrc.ucsc.edu/Papers/weil-sc06.pdf

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:11 -07:00
Sage Weil
f24e9980eb ceph: OSD client
The OSD client is responsible for reading and writing data from/to the
object storage pool.  This includes determining where objects are
stored in the cluster, and ensuring that requests are retried or
redirected in the event of a node failure or data migration.

If an OSD does not respond before a timeout expires, keepalive
messages are sent across the lossless, ordered communications channel
to ensure that any break in the TCP is discovered.  If the session
does reset, a reconnection is attempted and affected requests are
resent (by the message transport layer).

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:10 -07:00
Sage Weil
2f2dc05340 ceph: MDS client
The MDS (metadata server) client is responsible for submitting
requests to the MDS cluster and parsing the response.  We decide which
MDS to submit each request to based on cached information about the
current partition of the directory hierarchy across the cluster.  A
stateful session is opened with each MDS before we submit requests to
it, and a mutex is used to control the ordering of messages within
each session.

An MDS request may generate two responses.  The first indicates the
operation was a success and returns any result.  A second reply is
sent when the operation commits to disk.  Note that locking on the MDS
ensures that the results of updates are visible only to the updating
client before the operation commits.  Requests are linked to the
containing directory so that an fsync will wait for them to commit.

If an MDS fails and/or recovers, we resubmit requests as needed.  We
also reconnect existing capabilities to a recovering MDS to
reestablish that shared session state.  Old dentry leases are
invalidated.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:09 -07:00
Sage Weil
1d3576fd10 ceph: address space operations
The ceph address space methods are concerned primarily with managing
the dirty page accounting in the inode, which (among other things)
must keep track of which snapshot context each page was dirtied in,
and ensure that dirty data is written out to the OSDs in snapshort
order.

A writepage() on a page that is not currently writeable due to
snapshot writeback ordering constraints is ignored (it was presumably
called from kswapd).

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:09 -07:00
Sage Weil
124e68e740 ceph: file operations
File open and close operations, and read and write methods that ensure
we have obtained the proper capabilities from the MDS cluster before
performing IO on a file.  We take references on held capabilities for
the duration of the read/write to avoid prematurely releasing them
back to the MDS.

We implement two main paths for read and write: one that is buffered
(and uses generic_aio_{read,write}), and one that is fully synchronous
and blocking (operating either on a __user pointer or, if O_DIRECT,
directly on user pages).

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:08 -07:00
Sage Weil
2817b000b0 ceph: directory operations
Directory operations, including lookup, are defined here.  We take
advantage of lookup intents when possible.  For the most part, we just
need to build the proper requests for the metadata server(s) and
pass things off to the mds_client.

The results of most operations are normally incorporated into the
client's cache when the reply is parsed by ceph_fill_trace().
However, if the MDS replies without a trace (e.g., when retrying an
update after an MDS failure recovery), some operation-specific cleanup
may be needed.

We can validate cached dentries in two ways.  A per-dentry lease may
be issued by the MDS, or a per-directory cap may be issued that acts
as a lease on the entire directory.  In the latter case, a 'gen' value
is used to determine which dentries belong to the currently leased
directory contents.

We normally prepopulate the dcache and icache with readdir results.
This makes subsequent lookups and getattrs avoid any server
interaction.  It also lets us satisfy readdir operation by peeking at
the dcache IFF we hold the per-directory cap/lease, previously
performed a readdir, and haven't dropped any of the resulting
dentries.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:08 -07:00
Sage Weil
355da1eb7a ceph: inode operations
Inode cache and inode operations.  We also include routines to
incorporate metadata structures returned by the MDS into the client
cache, and some helpers to deal with file capabilities and metadata
leases.  The bulk of that work is done by fill_inode() and
fill_trace().

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:08 -07:00
Sage Weil
16725b9d2a ceph: super.c
Mount option parsing, client setup and teardown, and a few odds and
ends (e.g., statfs).

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:07 -07:00
Sage Weil
c30dbb9cc7 ceph: ref counted buffer
struct ceph_buffer is a simple ref-counted buffer.  We transparently
choose between kmalloc for small buffers and vmalloc for large ones.

This is currently used only for allocating memory for xattr data.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:07 -07:00
Sage Weil
de57606c23 ceph: client types
We first define constants, types, and prototypes for the kernel client
proper.

A few subsystems are defined separately later: the MDS, OSD, and
monitor clients, and the messaging layer.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:07 -07:00
Sage Weil
0dee3c28af ceph: on-wire types
These headers describe the types used to exchange messages between the
Ceph client and various servers.  All types are little-endian and
packed.  These headers are shared between the kernel and userspace, so
all types are in terms of e.g. __u32.

Additionally, we define a few magic values to identify the current
version of the protocol(s) in use, so that discrepancies to be
detected on mount.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:06 -07:00
Sage Weil
7ad920b504 ceph: documentation
Mount options, syntax.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:05 -07:00
Mark Brown
6f775ba015 Merge branch 'upstream/wm8350' into for-2.6.32 2009-10-06 19:29:47 +01:00
Mark Brown
5b7dde3468 ASoC: WM8350 capture PGA mutes are inverted
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
2009-10-06 19:27:56 +01:00
Mark Brown
b266002abf ASoC: Remove absent SYNC and TDM DAI format options from i.MX SSI
These should be handled via set_tdm_slot() now and cause build
failures as-is.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-06 19:26:57 +01:00
Jens Axboe
1b59dd511b block: use proper BLK_RW_ASYNC in blk_queue_start_tag()
Makes it easier to read than the 0.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06 20:19:02 +02:00
Nikanth Karthikesan
316d315bff block: Seperate read and write statistics of in_flight requests v2
Commit a9327cac44 added seperate read
and write statistics of in_flight requests. And exported the number
of read and write requests in progress seperately through sysfs.

But  Corrado Zoccolo <czoccolo@gmail.com> reported getting strange
output from "iostat -kx 2". Global values for service time and
utilization were garbage. For interval values, utilization was always
100%, and service time is higher than normal.

So this was reverted by commit 0f78ab9899

The problem was in part_round_stats_single(), I missed the following:
        if (now == part->stamp)
                return;

-       if (part->in_flight) {
+       if (part_in_flight(part)) {
                __part_stat_add(cpu, part, time_in_queue,
                                part_in_flight(part) * (now - part->stamp));
                __part_stat_add(cpu, part, io_ticks, (now - part->stamp));

With this chunk included, the reported regression gets fixed.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>

--
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06 20:16:55 +02:00
Mark Langsdorf
68b92b567c ACPI: add AC/DC notifier
Add an ACPI event notifier for AC/DC connect/disconnect events.

Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-10-06 13:55:56 -04:00
Rafael J. Wysocki
e13cdbd71f PCI PM: Read device power state from register after updating it
After attempting to change the power state of a PCI device
pci_raw_set_power_state() doesn't check if the value it wrote into
the device's PCI_PM_CTRL register has been stored in there, but
unconditionally modifies the device's current_state field to reflect
the change.  This may cause problems to happen if the power state of
the device hasn't been changed in fact, because it will make the PCI
PM core make a wrong assumption.

To prevent such situations from happening modify
pci_raw_set_power_state() so that it reads the device's PCI_PM_CTRL
register after writing into it and uses the value read from the
register to update the device's current_state field.  Also make it
print a message saying that the device refused to change its power
state as requested (returning an error code in such cases would cause
suspend regressions to appear on some systems, where device drivers'
suspend routines return error codes if pci_set_power_state() fails).

Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-10-06 10:27:51 -07:00
Nicolas Ferre
5416bf33f9 avr32: add two new at91 to cpu.h definition
Somme common drivers will need those at91 cpu_is_xxx() definitions. As
at91sam9g10 and at91sam9g45 are on the way to linus' tree, here is the patch
that adds those chips to cpu.h in AVR32 architecture.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-10-06 19:19:54 +02:00
Bjorn Helgaas
b812cca4e2 PCI: remove pci_assign_resource_fixed()
Adrian commented out this function in 2baad5f96b, but I don't think
it's even worth cluttering the file with the unused code.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-10-06 09:42:04 -07:00
Bjorn Helgaas
e3fb20f9c8 PCI: PCIe portdrv: remove "-driver" from driver name
No need to include "-driver" in the driver name.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Tom Long Nguyen <tom.l.nguyen@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-10-06 09:41:48 -07:00
Nelson Elhage
209205801c avr32: clean up linker script using standard macros.
As a side effect, this patch changes the .init.ramfs data to be
PAGE_SIZE-aligned, instead of 32-byte aligned.  Also, the init data is
moved into its own output sections rather than the .init output
section.

There should be no other changes to the resulting vmlinux as a result
of this patch.

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-10-06 17:39:22 +02:00
Haavard Skinnemoen
d94e5fcbf1 Merge commit 'v2.6.32-rc3' 2009-10-06 17:36:55 +02:00
Tony Lindgren
ab8d64d7d4 Merge branch 'pm-fixes-32' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-fixes-for-linus 2009-10-06 08:32:28 -07:00
Tommi Rantala
82e865011a omapfb: Blizzard: constify register address tables
Constify register address tables

Cc: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Cc: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-06 08:31:50 -07:00
Tommi Rantala
7999cad0e3 omapfb: Blizzard: fix pointer to be const
Fixes a compiler warning:
warning: assignment discards qualifiers from pointer target type

Cc: Tomi Valkeinen <tomi.valkeinen@nokia.com>
Cc: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-06 08:31:50 -07:00