Commit graph

42,169 commits

Author SHA1 Message Date
Michael Buesch
5100d5ac81 b43: Add PIO support for PCMCIA devices
This adds PIO support back (D'oh!) for PCMCIA devices.
This is a complete rewrite of the old PIO code. It does actually work
and we get reasonable performance out of it on a modern machine.
On a PowerBook G4 I get a few MBit for TX and a few more for RX.
So it doesn't work as well as DMA (of course), but it's a _lot_ faster
than the old PIO code (only got a few kBit with that).

The limiting factor is the host CPU speed. So it will generate 100%
CPU usage when the network interface is heavily loaded. A voluntary preemption
point in the RX path makes sure Desktop Latency isn't hurt.

PIO is needed for 16bit PCMCIA devices, as we really don't want to poke with
the braindead DMA mechanisms on PCMCIA sockets. Additionally, not all
PCMCIA sockets do actually support DMA in 16bit mode (mine doesn't).

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08 15:05:56 -04:00
Tomas Winkler
3109ece111 iwlwifi: Eliminate association from beacon
This patch removes association from beacon
using bss_info_change handler for association

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08 15:05:56 -04:00
Tomas Winkler
98952d5dec iwlwifi: eliminate conf_ht
This patch eliminates the use of conf_ht in iwlwifi driver, replacing it
with bss_info_changed.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08 15:05:56 -04:00
Michael Buesch
9788ba7500 ssb-pcmcia: IRQ and DMA related fixes
Here come some IRQ and DMA related fixes for the ssb PCMCIA-host code.
Not much to say, actually. I think the patch explains itself.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-08 15:05:56 -04:00
Stefano Brivio
881400a20c b43legacy: fix bcm4303 crash
This fixes an hard crash which happened upon driver loading on bcm4303 rev.
2 devices.

Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-07 22:19:29 -04:00
Abhijeet Kolekar
7981a35ed0 iwlwifi: fix n-band association problem
This patch enables the IWL4965_HT flag (n-band) in Kconfig.
Removed the "depends on n" from Kconfig for config IWL4965_HT

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-07 22:19:29 -04:00
Daniel Drake
3f2eeac979 ipw2200: set MAC address on radiotap interface
Commit bada339ba2 enforces that all
interfaces have a valid MAC address before they are brought up.

ipw2200 does not assign a MAC address to it's radiotap interface, meaning
that the radiotap interface cannot be brought up in 2.6.24.
https://bugs.gentoo.org/show_bug.cgi?id=215714

Fix this by copying the MAC address from the real interface.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-07 22:19:29 -04:00
Holger Schurig
877cb0d4af libertas: fix mode initialization problem
After moving lbs_find_best_network_ssid() from scan.c to assoc.c gcc was
able to deduce that new_mode might stay uninitialized.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-07 22:19:28 -04:00
Michael Krufky
4c3b01f711 pvrusb2: fix broken build due to patch order dependency
Fix broken build due to patch order dependency.  A future patch requires
the lines that break the current build.  Disable those lines for now.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-07 19:14:34 -07:00
Linus Torvalds
ad3c7e42e3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  siimage: fix kernel oops on PPC 44x
2008-04-07 14:26:53 -07:00
Sergei Shtylyov
c976816b6e siimage: fix kernel oops on PPC 44x
Fix kernel oops due to machine check occuring in init_chipset_siimage() on PPC
44x platforms.  These 32-bit CPUs have 36-bit physical address and PCI I/O and
memory spaces are mapped beyond 4 GB; arch/ppc/ code has a fixup in ioremap()
that creates an illusion of the PCI I/O and memory resources being mapped below
4 GB, while arch/powerpc/ code got rid of this fixup with PPC 44x having instead
CONFIG_RESOURCES_64BIT=y -- this causes the resources to be truncated to 32-bit
'unsigned long' type in this driver, and so non-existant memory being ioremap'ed
and then accessed...

Thanks to Valentine Barshak for providing an initial patch and explanations.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-07 23:30:10 +02:00
Anthony Liguori
6ea0a4679d virtio_net: remove overzealous printk
The 'disable_cb' is really just a hint and as such, it's possible for more
work to get queued up while callbacks are disabled.  Under stress with an
SMP guest, this printk triggers very frequently.  There is no race here, this
is how things are designed to work so let's just remove the printk.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-07 13:56:33 -07:00
Linus Torvalds
099c736a47 Revert "smc91x: fix build breakage from the SMC_GET_MAC_ADDR API upgrade"
This reverts commit 9e6db60825, which was
merged without the API it needed, causing build breakage.

Reported-by: Bryan Wu <cooloney@kernel.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-07 13:20:08 -07:00
Rusty Russell
2557a933b7 virtio: remove overzealous BUG_ON.
The 'disable_cb' callback is designed as an optimization to tell the host
we don't need callbacks now.  As it is not reliable, the debug check is
overzealous: it can happen on two CPUs at the same time.  Document this.

Even if it were reliable, the virtio_net driver doesn't disable
callbacks on transmit so the START_USE/END_USE debugging reentrance
protection can be easily tripped even on UP.

Thanks to Balaji Rao for the bug report and testing.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CC: Balaji Rao <balajirrao@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-07 13:14:22 -07:00
Andrew Vasquez
b35c07d007 [SCSI] qla2xxx: Update version number to 8.02.01-k1.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:16 -05:00
Seokmann Ju
221726d41a [SCSI] qla2xxx: Correct vport configuration-change handling.
Upon having configuration changes on vports only, the driver
handles SCR regardless physical port state and, in turn, it
results mailbox error as below:

	Mar 20 11:24:20 dl585 kernel: qla2x00_mailbox_command(9): **** FAILED.  mbx0=4005, mbx1=1, mbx2=8100, cmd=70 ****

With the changes, driver checks physical port loop_state and make
sure the port is ready to take commands.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:16 -05:00
Seokmann Ju
bd2a1846b2 [SCSI] qla2xxx: Use proper HA during asynchrounous event handling.
Changes are added to the driver so that it can behave properly
upon having asynchronous events, for example, addition of target
devices to the VPs.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:16 -05:00
Seokmann Ju
463717edc9 [SCSI] qla2xxx: Check DFLG_NO_CABLE only on physical port.
As there is no actual cable connection on vports, made change so
that the driver checks DFLG_NO_CABLE against ha->device_flags
only for physical port.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:16 -05:00
Seokmann Ju
d4486fd6de [SCSI] qla2xxx: Consistently access the physical HA port.
There were several places where referencing ha structure of
virtual ports for resources. Among those refereces, certain
fields are get up-to-dated only on ha structure of physical port.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:15 -05:00
Andrew Vasquez
73f0f0f24a [SCSI] qla2xxx: Remove unused member (dma_handle) from srb_t structure.
The member is not needed as there's no non-scatter-gather
list I/Os submitted by the upper-layers.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:15 -05:00
Harihara Kadayam
4d4df1932b [SCSI] qla2xxx: Add ISP84XX support.
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:15 -05:00
Ravi Anand
b93480e319 [SCSI] qla2xxx: Assign mailbox command timeout values in a consistent manner.
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:15 -05:00
Andrew Vasquez
523ec773b8 [SCSI] qla2xxx: Add midlayer target/device reset support.
Now that infrastructure is present within the midlayer and there
is a clear distinction between what is expected from a device and
target reset, convert the current device-reset codes to a
target-reset, and add codes to perform a proper device-reset (LUN
reset).

In the process of adding reset support, collapse and consolidate
large sections of mailbox-command (TMF issuance) codes,
generalize the two 'wait-for-commands-to-complete' functions, and
add a generic-reset routine for use by midlayer reset functions.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:15 -05:00
Andrew Vasquez
3fe7cfb910 [SCSI] qla2xxx: Check alternate 'reason' code during GPSC status handling.
Some switches return 0x09 (Command not supported) as the reason
code for GPSC failure.  Check for this code, and disable
additional GPSC queries if found.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:14 -05:00
Andrew Vasquez
7d232c745e [SCSI] qla2xxx: Add Flash Descriptor Table layout support.
The Flash Descriptor Table (FDT) present on many recent HBAs
encodes flash accessing characteristics of the flash-part used on
the HBA.  Use this information during flash manipulation (writes)
rather than using specific hard-coded values based on queried
manufacturer and device IDs.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:14 -05:00
Andrew Vasquez
c87a0d8c8d [SCSI] qla2xxx: Use PCI-SIG nomenclature for PCIe bandwidth units.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:14 -05:00
Andrew Vasquez
587f4cae4a [SCSI] qla2xxx: Cruft cleanup of functions and structures.
Strip unused (DEBUG-ONLY) enabled functions, inlines, useless
wrappers, and unused DPC flags from the code.  Another step in
the migration towards a cleaner (less-crusty) driver.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:14 -05:00
Andrew Vasquez
cb8dacbf11 [SCSI] qla2xxx: Add hardware trace-logging support.
Recent ISPs have a region within FLASH which acts as a repository
for the logging of serious hardware and software failures.
Currently, the region is large enough to support up to 255
entries.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:13 -05:00
Andrew Vasquez
0971de7f56 [SCSI] qla2xxx: Add FC-transport Asynchronous Event Notification support.
Supported events include LIP, LIP reset, RSCN, link up, and link
down.

To support AEN (and additional forthcoming features), we also
introduce a simple deferred-work construct to manage events which
require a non-atomic sleeping-capable context.  This work-list is
processed as part of the driver's standard DPC routine.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:13 -05:00
Andrew Vasquez
c6952483b0 [SCSI] qla2xxx: Simplify interrupt handler locking.
There's no need to use the heavier (albiet safer)
*_irq[save|restore]() locking primitives within the driver's
interrupt handlers, interrupts are guaranteed to be
non-reentrant.  Use lightweight spin_lock() and spin_unlock()
primitives while acquiring the hardware_lock.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:13 -05:00
Andrew Vasquez
5ab5a4dd54 [SCSI] qla2xxx: Use an rport's scsi_target_id member consistently throughout driver.
Rather than using a duplicate/cached value stored in the driver's
internal fcport structure.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:13 -05:00
Andrew Vasquez
0ddda2d152 [SCSI] qla2xxx: Remove unused and obsolete #define's.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:13 -05:00
Andrew Vasquez
2ae2b37095 [SCSI] qla2xxx: Add support for host supported speeds FC transport attribute.
Use generic FC transport #defines for speed values.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:12 -05:00
Andrew Vasquez
01e58d8eac [SCSI] qla2xxx: Update copyright banner.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:11 -05:00
Andrew Vasquez
203c29102b [SCSI] qla2xxx: Update firmware filenames for new ISP parts.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:11 -05:00
James Bottomley
db3cc200a6 [SCSI] ips: remove spurious cpu_to_leX on outX statements
These are completely wrong because both outX and writeX do an
automatic reverse of their arguments if necessary, so having an extra
cpu_to_leX gives us the wrong ordering on BE platforms again.

Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:11 -05:00
James Bottomley
2f3edc6936 [SCSI] transport_class: BUG if we can't release the attribute container
Every current transport class calls transport_container_release but
ignores the return value.  This is catastrophic if it returns an error
because the containers are part of a global list and the next action of
almost every transport class is to free the memory used by the
container.

Fix this by making transport_container_release a void, but making it BUG
if attribute_container_release returns an error ... this catches the
root cause of a system panic much earlier.  If we don't do this, we get
an eventual BUG when the attribute container list notices the corruption
caused by the freed memory it's still referencing.

Also made attribute_container_release __must_check as a reminder.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:10 -05:00
James Bottomley
fa8e36c39b [SCSI] fix barrier failure issue
Currently, if the barrier command fails, the error return isn't seen
by the block layer and it proceeds on regardless.  The problem is that
SCSI always returns no error for REQ_TYPE_BLOCK_PC ... it expects the
submitter to pick the errors out of req->errors, which the block
barrier functions don't do.

Since it appears that the way SG_IO and scsi_execute_request() work
they discard the block error return and always use req->errors, the
best fix for this is to have the SCSI layer return an error to block
if one actually occurred (this also allows us to filter out spurious
errors, like deferred sense).

This patch is a bug fix that will need backporting to stable, but it's
also quite a big change and in need of testing, so we'll incubate in
the main kernel tree and backport at the -rc2 or so stage if no
problems turn up.

Acked-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:10 -05:00
Martin Peschke
bfab1637b5 [SCSI] zfcp: Add docbook comments to debug trace.
Add missing docbook-comments for functions forming zfcp's internal
trace API.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:10 -05:00
Martin Peschke
92c7a83fc1 [SCSI] zfcp: Cleanup line breaks in debug trace.
Remove line breaks that do not conform to coding style.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:10 -05:00
Martin Peschke
6bc473dd32 [SCSI] zfcp: Shorten excessive names in debug trace.
Saving on line breaks, improving readability, by shortening excessive
function names and identifiers, by simplifying some functions call
chains, and by simplifying nesting of some data structure.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:10 -05:00
Christof Schmitt
2b604c9b90 [SCSI] zfcp: Move DBF definitions to private header file
Unclutter the global zfcp_def.h header. Move everything required to
call into the debug feature to a new header file.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:09 -05:00
Martin Peschke
a9c857757e [SCSI] zfcp: Simplify zfcp_dbf_tag and related functions in debug trace.
Simplify usage of zfcp_dbf_tag() and calling functions.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:09 -05:00
Martin Peschke
df29f4ac4d [SCSI] zfcp: Simplify usage of hex dump output function for debug trace.
Simplify usage of output function for hex dumps.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:09 -05:00
Martin Peschke
c7b7fc8c30 [SCSI] zfcp: Remove obsolete output function from debug trace.
Remove obsolete output function.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:09 -05:00
Martin Peschke
b634fff743 [SCSI] zfcp: Cleanup debug trace view functions.
Improve readability of code by using more convenient output function.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:09 -05:00
Martin Peschke
8fc5af1687 [SCSI] zfcp: simplify zfcp_dbf_timestamp()
Change zfcp_dbf_timestamp() so that it just calculates timespec from
timestamp. First step to be able to rip this code out of zfcp.
Besides, this change makes it easier to rip out old-style debug view
functions.

Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:08 -05:00
Adrian Bunk
81e56ded87 [SCSI] aic94xx: cleanups
- static functions in .c files shouldn't be marked inline
- make needlessly global code static
- remove the unused aic94xx_seq.c:asd_unpause_lseq()
- #if 0 other unused code

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:08 -05:00
Harvey Harrison
d70d4667e9 [SCSI] ch: fix sparse shadowed variable warnings
Replace the global err array with ch_err.
drivers/scsi/ch.c:271:6: warning: symbol 'err' shadows an earlier one
drivers/scsi/ch.c:116:3: originally declared here

Replace the temporary cmd buffer with ch_err to avoid shadowing the cmd
function parameter.
drivers/scsi/ch.c:724:11: warning: symbol 'cmd' shadows an earlier one
drivers/scsi/ch.c:596:20: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:08 -05:00
Adrian Bunk
8c5e03d3cf [SCSI] make scsi_end_bidi_request() static
This patch makes the needlessly global scsi_end_bidi_request() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:08 -05:00