The sysctl core is preparing to only expose instances of
struct ctl_table as "const".
This will also affect the ctl_table argument of sysctl handlers.
As the function prototype of all sysctl handlers throughout the tree
needs to stay consistent that change will be done in one commit.
To reduce the size of that final commit, switch utility functions which
are not bound by "typedef proc_handler" to "const struct ctl_table".
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240527-sysctl-const-handler-net-v1-3-16523767d0b2@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sysctl core is preparing to only expose instances of
struct ctl_table as "const".
This will also affect the ctl_table argument of sysctl handlers.
As the function prototype of all sysctl handlers throughout the tree
needs to stay consistent that change will be done in one commit.
To reduce the size of that final commit, switch utility functions which
are not bound by "typedef proc_handler" to "const struct ctl_table".
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240527-sysctl-const-handler-net-v1-2-16523767d0b2@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sysctl core is preparing to only expose instances of
struct ctl_table as "const".
This will also affect the ctl_table argument of sysctl handlers.
As the function prototype of all sysctl handlers throughout the tree
needs to stay consistent that change will be done in one commit.
To reduce the size of that final commit, switch utility functions which
are not bound by "typedef proc_handler" to "const struct ctl_table".
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240527-sysctl-const-handler-net-v1-1-16523767d0b2@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This early RTL8168b version was the first PCIe chip version, and it's
quite quirky. Last sign of life is from more than 15 yrs ago.
Let's remove detection of this chip version, we'll see whether anybody
complains. If not, support for this chip version can be removed a few
kernel versions later.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/875cdcf4-843c-420a-ad5d-417447b68572@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vendor driver calls this bit RxDescUnavail. All we do in the interrupt
handler in this case is scheduling NAPI. If we should be out of
RX descriptors, then NAPI is scheduled anyway. Therefore remove this
interrupt source. Tested on RTL8168h.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/9b2054b2-0548-4f48-bf91-b646572093b4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is possible for syzbot to side-step the restriction imposed by the
blamed commit in the Fixes: tag, because the taprio UAPI permits a
cycle-time different from (and potentially shorter than) the sum of
entry intervals.
We need one more restriction, which is that the cycle time itself must
be larger than N * ETH_ZLEN bit times, where N is the number of schedule
entries. This restriction needs to apply regardless of whether the cycle
time came from the user or was the implicit, auto-calculated value, so
we move the existing "cycle == 0" check outside the "if "(!new->cycle_time)"
branch. This way covers both conditions and scenarios.
Add a selftest which illustrates the issue triggered by syzbot.
Fixes: b5b73b26b3 ("taprio: Fix allowing too small intervals")
Reported-by: syzbot+a7d2b1d5d1af83035567@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/0000000000007d66bc06196e7c66@google.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20240527153955.553333-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit b5b73b26b3 ("taprio: Fix allowing too small intervals"), a
comparison of user input against length_to_duration(q, ETH_ZLEN) was
introduced, to avoid RCU stalls due to frequent hrtimers.
The implementation of length_to_duration() depends on q->picos_per_byte
being set for the link speed. The blamed commit in the Fixes: tag has
moved this too late, so the checks introduced above are ineffective.
The q->picos_per_byte is zero at parse_taprio_schedule() ->
parse_sched_list() -> parse_sched_entry() -> fill_sched_entry() time.
Move the taprio_set_picos_per_byte() call as one of the first things in
taprio_change(), before the bulk of the netlink attribute parsing is
done. That's because it is needed there.
Add a selftest to make sure the issue doesn't get reintroduced.
Fixes: 09dbdf28f9 ("net/sched: taprio: fix calculation of maximum gate durations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240527153955.553333-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch uses new helper start_server_str() in do_test() in bpf_tcp_ca.c
to accept a struct network_helper_opts argument instead of using
start_server() and settcpca(). Then change the type of the first paramenter
of do_test() into a struct network_helper_opts one.
Define its own cb_opts and opts for each test, set its own cc name into
cb_opts.cc, and cc_cb() into post_socket_cb callback, then pass it to
do_test().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/6e1b6555e3284e77c8aa60668c61a66c5f99aa37.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch uses start_server_str() helper in test_dctcp_fallback() in
bpf_tcp_ca.c, instead of using start_server() and settcpca(). For
support opts in start_server_str() helper, opts->cb_opts needs to be
passed to post_socket_cb() in __start_server().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/414c749321fa150435f7fe8e12c80fec8b447c78.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Since the post_socket_cb() callback is added in struct network_helper_opts,
it's make sense to use it not only in __start_server(), but also in
connect_to_fd_opts(). Then it can be used to set TCP_CONGESTION sockopt.
Add a "void *" type member cb_opts into struct network_helper_opts, and add
a new struct named cb_opts in prog_tests/bpf_tcp_ca.c, then cc can be moved
into struct cb_opts from network_helper_opts. Define a new callback cc_cb()
to set TCP_CONGESTION sockopt, and set it to post_socket_cb pointer of opts.
Define a new cb_opts cubic, set it to cb_opts of opts. Pass this opts to
connect_to_fd_opts() in test_dctcp_fallback().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/b512bb8d8f6854c9ea5c409b69d1bf37c6f272c6.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
It's a tech debt that start_server() does not take the "opts" argument.
It's pretty handy to have start_server() as a helper that takes string
address.
So this patch creates a new helper start_server_str(). Then start_server()
can be a wrapper of it.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/606e6cfd7e1aff8bc51ede49862eed0802e52170.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
It's not possible to have one generic/common "struct post_socket_opts"
for all tests. It's better to have the individual test define its own
callback opts struct.
So this patch drops struct post_socket_opts, and changes the second
parameter of post_socket_cb as "void *" type.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/f8bda41c7cb9cb6979b2779f89fb3a684234304f.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Configure logging verbosity by setting LIBBPF_LOG_LEVEL environment
variable, which is applied only to default logger. Once user set their
custom logging callback, it is up to them to handle filtering.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240524131840.114289-1-yatsenko@meta.com
We were accidentally returning -EROFS during recovery on filesystem
inconsistency - since this is what the journal returns on emergency
shutdown.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Move the mode verification to __create_region() before allocating the
memregion to avoid the memregion leaks.
Fixes: 6e09926418 ("cxl/region: Add volatile region creation support")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240507053421.456439-1-lizhijian@fujitsu.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
tools/testing/cxl/test/mem.c uses vmalloc() and vfree() but does not
include linux/vmalloc.h. Kernel v6.10 made changes that causes the
currently included headers not depend on vmalloc.h and therefore
mem.c can no longer compile. Add linux/vmalloc.h to fix compile
issue.
CC [M] tools/testing/cxl/test/mem.o
tools/testing/cxl/test/mem.c: In function ‘label_area_release’:
tools/testing/cxl/test/mem.c:1428:9: error: implicit declaration of function ‘vfree’; did you mean ‘kvfree’? [-Werror=implicit-function-declaration]
1428 | vfree(lsa);
| ^~~~~
| kvfree
tools/testing/cxl/test/mem.c: In function ‘cxl_mock_mem_probe’:
tools/testing/cxl/test/mem.c:1466:22: error: implicit declaration of function ‘vmalloc’; did you mean ‘kmalloc’? [-Werror=implicit-function-declaration]
1466 | mdata->lsa = vmalloc(LSA_SIZE);
| ^~~~~~~
| kmalloc
Fixes: 7d3eb23c4c ("tools/testing/cxl: Introduce a mock memory device + driver")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/20240528225551.1025977-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The Lenovo N24 on resume becomes stuck in a state where it
sends incorrect packets, causing elantech_packet_check_v4 to fail.
The only way for the device to resume sending the correct packets is for
it to be disabled and then re-enabled.
This change adds a dmi check to trigger this behavior on resume.
Signed-off-by: Jonathan Denose <jdenose@google.com>
Link: https://lore.kernel.org/r/20240503155020.v2.1.Ifa0e25ebf968d8f307f58d678036944141ab17e6@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This removes the restriction of needing iif selector in the
forward/input hooks for fib lookups when requested result is
oif/oifname.
Removing this restriction allows "loose" lookups from the forward hooks.
Fixes: be8be04e5d ("netfilter: nft_fib: reverse path filter for policy-based routing on iif")
Signed-off-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
syzbot reports:
general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
[..]
RIP: 0010:nf_tproxy_laddr4+0xb7/0x340 net/ipv4/netfilter/nf_tproxy_ipv4.c:62
Call Trace:
nft_tproxy_eval_v4 net/netfilter/nft_tproxy.c:56 [inline]
nft_tproxy_eval+0xa9a/0x1a00 net/netfilter/nft_tproxy.c:168
__in_dev_get_rcu() can return NULL, so check for this.
Reported-and-tested-by: syzbot+b94a6818504ea90d7661@syzkaller.appspotmail.com
Fixes: cc6eb43385 ("tproxy: use the interface primary IP address as a default value for --on-ip")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Userspace assumes vlan header is present at a given offset, but vlan
offload allows to store this in metadata fields of the skbuff. Hence
mangling vlan results in a garbled packet. Handle this transparently by
adding a parser to the kernel.
If vlan metadata is present and payload offset is over 12 bytes (source
and destination mac address fields), then subtract vlan header present
in vlan metadata, otherwise mangle vlan metadata based on offset and
length, extracting data from the source register.
This is similar to:
8cfd23e674 ("netfilter: nft_payload: work around vlan header stripping")
to deal with vlan payload mangling.
Fixes: 7ec3f7b47b ("netfilter: nft_payload: add packet mangling support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This documents Samsung Galaxy Z Fold5 (samsung,q5q)
which is a foldable phone by Samsung based on the sm8550 SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandru Marc Serdeliuc <serdeliuk@yahoo.com>
Link: https://lore.kernel.org/r/20240411-samsung-galaxy-zfold5-q5q-v6-1-8142297515aa@yahoo.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the device-tree nodes for the TBUs (translation buffer units) that
are present on the sc7280 platforms. The TBUs can be used debug the
kernel and provide additional information when a context faults occur.
Describe all the registers, clocks, interconnects and power-domain
resources that are needed for each of the TBUs.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-8-quic_c_gdjako@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the device-tree nodes for the TBUs (translation buffer units) that
are present on the sdm845 platforms. The TBUs can be used debug the
kernel and provide additional information when a context faults occur.
Describe the all registers, clocks, interconnects and power-domain
resources that are needed for each of the TBUs.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-6-quic_c_gdjako@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The debug prints about how long the GuC load takes have a loop
counter. However that was neither initialised nor incremented! Plus,
counting loops is no longer meaningful given the wait function returns
early for any change in the status value. So fix it to only count
loops due to actual timeouts.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405250151.IbH0l8FG-lkp@intel.com/
Fixes: b0ac1b42db ("drm/xe/guc: Port over the slow GuC loading support from i915")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Cc: intel-xe@lists.freedesktop.org
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240524202603.4011656-1-John.C.Harrison@Intel.com
PCIe host controller driver needs to choose the appropriate performance
state of RPMh power domain and interconnect bandwidth based on the PCIe
data rate.
Hence, add the OPP table support to specify RPMh performance states and
interconnect peak bandwidth.
It should be noted that the different link configurations may share the
same aggregate bandwidth, e.g., a 2.5 GT/s x2 link and a 5.0 GT/s x1
link have the same bandwidth and share the same OPP entry.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Link: https://lore.kernel.org/r/20240518-opp_support-v13-4-78c73edf50de@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The crypto_ahb and crypto_axi clks are hardware voteable.
This means that the halt bit isn't reliable because some
other voter in the system, e.g. TrustZone, could be keeping
the clk enabled when the kernel turns it off from clk_disable().
Make these clks use voting mode by changing the halt check to
BRANCH_HALT_VOTED and toggle the voting bit in the voting register
instead of directly controlling the branch by writing to the branch
register. This fixes stuck clk warnings seen on ipq9574 and saves
power by actually turning the clk off.
Also changes the CRYPTO_AHB_CLK_ENA & CRYPTO_AXI_CLK_ENA
offset to 0xb004 from 0x16014.
Cc: stable@vger.kernel.org
Fixes: f6b2bd9cb2 ("clk: qcom: gcc-ipq9574: Enable crypto clocks")
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Link: https://lore.kernel.org/r/20240509105405.1262369-1-quic_mdalam@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Since the CONFIG_CTL register is only 32 bits wide in the Stromer
and Stromer Plus PLLs , the 'config_ctl_hi_val' values from the
IPQ5018 and IPQ5332 configurations are not used so remove those.
No functional changes.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240509-stromer-config-ctl-v1-1-6034e17b28d5@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clk_alpha_pll_stromer_plus_set_rate() function does not
sets the ALPHA_EN bit in the USER_CTL register, so setting
rates which requires using alpha mode works only if the bit
gets set already prior calling the function.
Extend the function to set the ALPHA_EN bit in order to allow
using fractional rates regardless whether the bit gets set
previously or not.
Fixes: 84da48921a ("clk: qcom: clk-alpha-pll: introduce stromer plus ops")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20240508-stromer-plus-alpha-en-v1-1-6639ce01ca5b@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Both gpll6 and gpll7 are parented to CXO at 19.2 MHz and not to GPLL0
which runs at 600 MHz. Also gpll6_out_even should have the parent gpll6
and not gpll0.
Adjust the parents of these clocks to make Linux report the correct rate
and not absurd numbers like gpll7 at ~25 GHz or gpll6 at 24 GHz.
Corrected rates are the following:
gpll7 807999902 Hz
gpll6 768000000 Hz
gpll6_out_even 384000000 Hz
gpll0 600000000 Hz
gpll0_out_odd 200000000 Hz
gpll0_out_even 300000000 Hz
And because gpll6 is the parent of gcc_sdcc2_apps_clk_src (at 202 MHz)
that clock also reports the correct rate now and avoids this warning:
[ 5.984062] mmc0: Card appears overclocked; req 202000000 Hz, actual 6312499237 Hz
Fixes: 131abae905 ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240508-sm6350-gpll-fix-v1-1-e4ea34284a6d@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IPQ9574 has four PCIe "pipe" clocks. These clocks are required by
PCIe PHYs. Port the pipe clocks from the downstream 5.4 kernel.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240501040800.1542805-3-mr.nuke.me@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The ath10k driver waits for an "MSA_READY" indicator
to complete initialization. If the indicator is not
received, then the device remains unusable.
cf. ath10k_qmi_driver_event_work()
Several msm8998-based devices are affected by this issue.
Oddly, it seems safe to NOT wait for the indicator, and
proceed immediately when QMI_EVENT_SERVER_ARRIVE.
Jeff Johnson wrote:
The feedback I received was "it might be ok to change all ath10k qmi
to skip waiting for msa_ready", and it was pointed out that ath11k
(and ath12k) do not wait for it.
However with so many deployed devices, "might be ok" isn't a strong
argument for changing the default behavior.
cf. also
https://wiki.postmarketos.org/wiki/Qualcomm_Snapdragon_835_(MSM8998)#WLAN
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/0914f96e-fcfd-4088-924a-fc1991bce75f@freebox.fr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Deprecate the qcom,ipc way of accessing the mailbox in favor of the
'mboxes' property.
Update the example to use mboxes.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20240425-qcom-ipc-deprecate-v1-2-a8d8034253ea@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
