Allocate cleared blocks in the bias range when the DRM
buddy's clear avail is zero. This will validate the bias
range allocation in scenarios like system boot when no
cleared blocks are available and exercise the fallback
path too. The resulting blocks should always be dirty.
v1:(Matthew)
- move the size to the variable declaration section.
- move the mm.clear_avail init to allocator init.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145636.16253-2-Arunpravin.PaneerSelvam@amd.com
Problem statement: During the system boot time, an application request
for the bulk volume of cleared range bias memory when the clear_avail
is zero, we dont fallback into normal allocation method as we had an
unnecessary clear_avail check which prevents the fallback method leads
to fb allocation failure following system goes into unresponsive state.
Solution: Remove the unnecessary clear_avail check in the range bias
allocation function.
v2: add a kunit for this corner case (Daniel Vetter)
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Fixes: 96950929eb ("drm/buddy: Implement tracking clear page feature")
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145636.16253-1-Arunpravin.PaneerSelvam@amd.com
During a cgroup_rstat_flush() call, the lowest level of nodes are flushed
first before their parents. Since commit 3b8cc62987 ("blk-cgroup:
Optimize blkcg_rstat_flush()"), iostat propagation was still done to
the parent. Grandparent, however, may not get the iostat update if the
parent has no blkg_iostat_set queued in its lhead lockless list.
Fix this iostat propagation problem by queuing the parent's global
blkg->iostat into one of its percpu lockless lists to make sure that
the delta will always be propagated up to the grandparent and so on
toward the root blkcg.
Note that successive calls to __blkcg_rstat_flush() are serialized by
the cgroup_rstat_lock. So no special barrier is used in the reading
and writing of blkg->iostat.lqueued.
Fixes: 3b8cc62987 ("blk-cgroup: Optimize blkcg_rstat_flush()")
Reported-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Closes: https://lore.kernel.org/lkml/ZkO6l%2FODzadSgdhC@dschatzberg-fedora-PF3DHTBV/
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240515143059.276677-1-longman@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__blkcg_rstat_flush() can be run anytime, especially when blk_cgroup_bio_start
is being executed.
If WRITE of `->lqueued` is re-ordered with READ of 'bisc->lnode.next' in
the loop of __blkcg_rstat_flush(), `next_bisc` can be assigned with one
stat instance being added in blk_cgroup_bio_start(), then the local
list in __blkcg_rstat_flush() could be corrupted.
Fix the issue by adding one barrier.
Cc: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Fixes: 3b8cc62987 ("blk-cgroup: Optimize blkcg_rstat_flush()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240515013157.443672-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 3b8cc62987 ("blk-cgroup: Optimize blkcg_rstat_flush()"),
each iostat instance is added to blkcg percpu list, so blkcg_reset_stats()
can't reset the stat instance by memset(), otherwise the llist may be
corrupted.
Fix the issue by only resetting the counter part.
Cc: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Jay Shin <jaeshin@redhat.com>
Fixes: 3b8cc62987 ("blk-cgroup: Optimize blkcg_rstat_flush()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20240515013157.443672-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
New since 2024.04.08:
Len Brown (6):
tools/power turbostat: Add "snapshot:" Makefile target
tools/power turbostat: Harden probe_intel_uncore_frequency()
tools/power turbostat: Remember global max_die_id
tools/power turbostat: Survive sparse die_id
tools/power turbostat: Add columns for clustered uncore frequency
tools/power turbostat: version 2024.05.10
Patryk Wlazlyn (7):
tools/power turbostat: Replace _Static_assert with BUILD_BUG_ON
tools/power turbostat: Enable non-privileged users to read sysfs counters
tools/power turbostat: Avoid possible memory corruption due to sparse topology IDs
tools/power turbostat: Read Core-cstates via perf
tools/power turbostat: Read Package-cstates via perf
tools/power turbostat: Fix order of strings in pkg_cstate_limit_strings
tools/power turbostat: Ignore pkg_cstate_limit when it is not available
Zhang Rui (2):
tools/power turbostat: Enhance ARL/LNL support
tools/power turbostat: Add ARL-H support
Signed-off-by: Len Brown <len.brown@intel.com>
When running in no-msr mode, the pkg_cstate_limit is not populated, thus
we use perf to determine if given pcstate counter is present on the
platform.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Change the order so that it matches the indexes defined in:
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Reading the counters via perf can be done in bulk with a single syscall,
making the counter values more accurate with respect to one another by
minimizing the time gap between individual counter reads.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Reading the counters via perf can be done in bulk with a single syscall,
making the counter values more accurate with respect to one another by
minimizing the time gap between individual counter reads.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Save the highest core and package id when parsing topology to
allocate enough memory when get_rapl_counters() is called with a core or
a package id as a domain.
Note that RAPL domains are per-package on Intel, but per-core on AMD.
Thus, the RAPL code effectively runs in different modes on those two
product lines.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
New machines have multiple uncore frequencies per package,
visible in /sys/devices/system/cpu/intel_uncore_frequency/uncore##/
turbostat now samples these frequencies each measurement interval.
For each package, turbostat now prints "UMHzX.Y" columns,
where X = domain_id, and Y = fabric_cluster_id.
The system summary for each UMHzX.Y column is the average value
for across all of the packages in the system.
Signed-off-by: Len Brown <len.brown@intel.com>
- Work items can now be disabled and enabled, and cancel_work_sync() and
disable_work() can be called form atomic contexts for BH work items. This
closes feature gap with tasklet and should allow converting all existing
tasklet users to BH workqueues.
- Improve pool sharing for unbound workqueues with strict affinity.
- Misc changes including doc updates, improved debug annotations and
cleanups.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZkU2FA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGaNaAQDgO5Za4NH3EKVD8BIHpG7N3BpcVNGh/as9E2vh
sgJMhwEA7YY4LOUkGkCWYdT+fj7Od/xyqHVH1DVozL2blfsF1gY=
=ZEuW
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
- Work items can now be disabled and enabled, and cancel_work_sync()
and disable_work() can be called form atomic contexts for BH work
items.
This closes feature gap with tasklet and should allow converting all
existing tasklet users to BH workqueues.
- Improve pool sharing for unbound workqueues with strict affinity.
- Misc changes including doc updates, improved debug annotations and
cleanups.
* tag 'wq-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Use "@..." in function comment to describe variable length argument
workqueue: Add destroy_work_on_stack() in workqueue_softirq_dead()
workqueue: remove unnecessary import and function in wq_monitor.py
workqueue: Introduce enable_and_queue_work() convenience function
workqueue: add function in event of workqueue_activate_work
workqueue: Cleanup subsys attribute registration
workqueue: Use list_last_entry() to get the last idle worker
workqueue: Move attrs->cpumask out of worker_pool's properties when attrs->affn_strict
workqueue: Use INIT_WORK_ONSTACK in workqueue_softirq_dead()
workqueue: Allow cancel_work_sync() and disable_work() from atomic contexts on BH work items
workqueue: Remember whether a work item was on a BH workqueue
workqueue: Remove WORK_OFFQ_CANCELING
workqueue: Implement disable/enable for (delayed) work items
workqueue: Preserve OFFQ bits in cancel[_sync] paths
- The locking around cpuset hotplug processing has always been a bit of mess
which was worked around by making hotplug processing asynchronous. The
asynchronity isn't great and led to other issues. We tried to make the
behavior synchronous a while ago but that led to lockdep splats. Waiman
took another stab at cleaning up and making it synchronous. The patch has
been in -next for well over a month and there haven't been any complaints,
so fingers crossed.
- Tracepoints added to help understanding rstat lock contentions.
- A bunch of minor changes - doc updates, code cleanups and selftests.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZkUrFA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGfTyAQCwd0aNQOqaKRhJGtWYShqV/aYzurCy1Z2tB9/3
dkdy9gD7BHNk6kZQEbT97RrHPIduFansLtc76VziACibWBuomgg=
=2DNQ
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- The locking around cpuset hotplug processing has always been a bit of
mess which was worked around by making hotplug processing
asynchronous. The asynchronity isn't great and led to other issues.
We tried to make the behavior synchronous a while ago but that led to
lockdep splats. Waiman took another stab at cleaning up and making it
synchronous. The patch has been in -next for well over a month and
there haven't been any complaints, so fingers crossed.
- Tracepoints added to help understanding rstat lock contentions.
- A bunch of minor changes - doc updates, code cleanups and selftests.
* tag 'cgroup-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits)
cgroup/rstat: add cgroup_rstat_cpu_lock helpers and tracepoints
selftests/cgroup: Drop define _GNU_SOURCE
docs: cgroup-v1: Update page cache removal functions
selftests/cgroup: fix uninitialized variables in test_zswap.c
selftests/cgroup: cpu_hogger init: use {} instead of {NULL}
selftests/cgroup: fix clang warnings: uninitialized fd variable
selftests/cgroup: fix clang build failures for abs() calls
cgroup/cpuset: Remove outdated comment in sched_partition_write()
cgroup/cpuset: Fix incorrect top_cpuset flags
cgroup/cpuset: Avoid clearing CS_SCHED_LOAD_BALANCE twice
cgroup/cpuset: Statically initialize more members of top_cpuset
cgroup: Avoid unnecessary looping in cgroup_no_v1()
cgroup, legacy_freezer: update comment for freezer_css_offline()
docs, cgroup: add entries for pids to cgroup-v2.rst
cgroup: don't call cgroup1_pidlist_destroy_all() for v2
cgroup_freezer: update comment for freezer_css_online()
cgroup/rstat: desc member cgrp in cgroup_rstat_flush_release
cgroup/rstat: add cgroup_rstat_lock helpers and tracepoints
cgroup/pids: Remove superfluous zeroing
docs: cgroup-v1: Fix description for css_online
...
If an error happens in ftrace, ftrace_kill() will prevent disarming
kprobes. Eventually, the ftrace_ops associated with the kprobes will be
freed, yet the kprobes will still be active, and when triggered, they
will use the freed memory, likely resulting in a page fault and panic.
This behavior can be reproduced quite easily, by creating a kprobe and
then triggering a ftrace_kill(). For simplicity, we can simulate an
ftrace error with a kernel module like [1]:
[1]: https://github.com/brenns10/kernel_stuff/tree/master/ftrace_killer
sudo perf probe --add commit_creds
sudo perf trace -e probe:commit_creds
# In another terminal
make
sudo insmod ftrace_killer.ko # calls ftrace_kill(), simulating bug
# Back to perf terminal
# ctrl-c
sudo perf probe --del commit_creds
After a short period, a page fault and panic would occur as the kprobe
continues to execute and uses the freed ftrace_ops. While ftrace_kill()
is supposed to be used only in extreme circumstances, it is invoked in
FTRACE_WARN_ON() and so there are many places where an unexpected bug
could be triggered, yet the system may continue operating, possibly
without the administrator noticing. If ftrace_kill() does not panic the
system, then we should do everything we can to continue operating,
rather than leave a ticking time bomb.
Link: https://lore.kernel.org/all/20240501162956.229427-1-stephen.s.brennan@oracle.com/
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When invalidating a file as part of breaking a lease, the folios holding
the file data are disposed of, and truncate calls ->invalidate_folio()
to get rid of them rather than calling ->release_folio(). This means
that the netfs_inode::zero_point value didn't get updated in current
upstream code to reflect the point after which we can assume that the
server will only return zeroes, and future reads will then return blocks
of zeroes if the file got extended for any region beyond the old zero
point.
Fix this by updating zero_point before invalidating the inode in
cifs_revalidate_mapping().
Suggested-by: David Howells <dhowells@redhat.com>
Fixes: 3ee1a1fc39 ("cifs: Cut over to using netfslib")
Reviewed-by: David Howells <dhowell@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This reverts commit e23d4192bf.
IMS (Interrupt Message Store) support appeared in v6.2, but there are no
users yet.
Remove it for now. We can add it back when a user comes along.
Link: https://lore.kernel.org/r/20240410221307.2162676-8-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
This reverts commit 6e24c88773.
IMS (Interrupt Message Store) support appeared in v6.2, but there are no
users yet.
Remove it for now. We can add it back when a user comes along.
Link: https://lore.kernel.org/r/20240410221307.2162676-7-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
This reverts commit 810531a1af.
IMS (Interrupt Message Store) support appeared in v6.2, but there are no
users yet.
Remove it for now. We can add it back when a user comes along.
Link: https://lore.kernel.org/r/20240410221307.2162676-6-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
This reverts commit fa5745aca1.
IMS (Interrupt Message Store) support appeared in v6.2, but there are no
users yet.
Remove it for now. We can add it back when a user comes along.
Link: https://lore.kernel.org/r/20240410221307.2162676-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
This reverts commit 0194425af0.
IMS (Interrupt Message Store) support appeared in v6.2, but there are no
users yet.
Remove it for now. We can add it back when a user comes along. If this is
re-added later, the relevant part of 41efa43124 ("PCI/MSI: Provide stubs
for IMS functions") should be squashed into it.
Link: https://lore.kernel.org/r/20240410221307.2162676-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
This reverts commit c9e5bea273.
IMS (Interrupt Message Store) support appeared in v6.2, but there are no
users yet.
Remove it for now. We can add it back when a user comes along. If this is
re-added later, the relevant part of 41efa43124 ("PCI/MSI: Provide stubs
for IMS functions") should be squashed into it.
Link: https://lore.kernel.org/r/20240410221307.2162676-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
This reverts commit 41efa43124.
IMS (Interrupt Message Store) support appeared in v6.2, but there are no
users yet.
Remove it for now. We can add it back when a user comes along. If this is
re-added later, this could be squashed with these commits:
0194425af0 ("PCI/MSI: Provide IMS (Interrupt Message Store) support")
c9e5bea273 ("PCI/MSI: Provide pci_ims_alloc/free_irq()")
which added the non-stub implementations.
Link: https://lore.kernel.org/r/20240410221307.2162676-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
* Move a lot of state that was previously stored on a per vcpu
basis into a per-CPU area, because it is only pertinent to the
host while the vcpu is loaded. This results in better state
tracking, and a smaller vcpu structure.
* Add full handling of the ERET/ERETAA/ERETAB instructions in
nested virtualisation. The last two instructions also require
emulating part of the pointer authentication extension.
As a result, the trap handling of pointer authentication has
been greatly simplified.
* Turn the global (and not very scalable) LPI translation cache
into a per-ITS, scalable cache, making non directly injected
LPIs much cheaper to make visible to the vcpu.
* A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
* Allocate PPIs and SGIs outside of the vcpu structure, allowing
for smaller EL2 mapping and some flexibility in implementing
more or less than 32 private IRQs.
* Purge stale mpidr_data if a vcpu is created after the MPIDR
map has been created.
* Preserve vcpu-specific ID registers across a vcpu reset.
* Various minor cleanups and improvements.
LoongArch:
* Add ParaVirt IPI support.
* Add software breakpoint support.
* Add mmio trace events support.
RISC-V:
* Support guest breakpoints using ebreak
* Introduce per-VCPU mp_state_lock and reset_cntx_lock
* Virtualize SBI PMU snapshot and counter overflow interrupts
* New selftests for SBI PMU and Guest ebreak
* Some preparatory work for both TDX and SNP page fault handling.
This also cleans up the page fault path, so that the priorities
of various kinds of fauls (private page, no memory, write
to read-only slot, etc.) are easier to follow.
x86:
* Minimize amount of time that shadow PTEs remain in the special
REMOVED_SPTE state. This is a state where the mmu_lock is held for
reading but concurrent accesses to the PTE have to spin; shortening
its use allows other vCPUs to repopulate the zapped region while
the zapper finishes tearing down the old, defunct page tables.
* Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID field,
which is defined by hardware but left for software use. This lets KVM
communicate its inability to map GPAs that set bits 51:48 on hosts
without 5-level nested page tables. Guest firmware is expected to
use the information when mapping BARs; this avoids that they end up at
a legal, but unmappable, GPA.
* Fixed a bug where KVM would not reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
* As usual, a bunch of code cleanups.
x86 (AMD):
* Implement a new and improved API to initialize SEV and SEV-ES VMs, which
will also be extendable to SEV-SNP. The new API specifies the desired
encryption in KVM_CREATE_VM and then separately initializes the VM.
The new API also allows customizing the desired set of VMSA features;
the features affect the measurement of the VM's initial state, and
therefore enabling them cannot be done tout court by the hypervisor.
While at it, the new API includes two bugfixes that couldn't be
applied to the old one without a flag day in userspace or without
affecting the initial measurement. When a SEV-ES VM is created with
the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are
rejected once the VMSA has been encrypted. Also, the FPU and AVX
state will be synchronized and encrypted too.
* Support for GHCB version 2 as applicable to SEV-ES guests. This, once
more, is only accessible when using the new KVM_SEV_INIT2 flow for
initialization of SEV-ES VMs.
x86 (Intel):
* An initial bunch of prerequisite patches for Intel TDX were merged.
They generally don't do anything interesting. The only somewhat user
visible change is a new debugging mode that checks that KVM's MMU
never triggers a #VE virtualization exception in the guest.
* Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig VM-Exit to
L1, as per the SDM.
Generic:
* Use vfree() instead of kvfree() for allocations that always use vcalloc()
or __vcalloc().
* Remove .change_pte() MMU notifier - the changes to non-KVM code are
small and Andrew Morton asked that I also take those through the KVM
tree. The callback was only ever implemented by KVM (which was also the
original user of MMU notifiers) but it had been nonfunctional ever since
calls to set_pte_at_notify were wrapped with invalidate_range_start
and invalidate_range_end... in 2012.
Selftests:
* Enhance the demand paging test to allow for better reporting and stressing
of UFFD performance.
* Convert the steal time test to generate TAP-friendly output.
* Fix a flaky false positive in the xen_shinfo_test due to comparing elapsed
time across two different clock domains.
* Skip the MONITOR/MWAIT test if the host doesn't actually support MWAIT.
* Avoid unnecessary use of "sudo" in the NX hugepage test wrapper shell
script, to play nice with running in a minimal userspace environment.
* Allow skipping the RSEQ test's sanity check that the vCPU was able to
complete a reasonable number of KVM_RUNs, as the assert can fail on a
completely valid setup. If the test is run on a large-ish system that is
otherwise idle, and the test isn't affined to a low-ish number of CPUs, the
vCPU task can be repeatedly migrated to CPUs that are in deep sleep states,
which results in the vCPU having very little net runtime before the next
migration due to high wakeup latencies.
* Define _GNU_SOURCE for all selftests to fix a warning that was introduced by
a change to kselftest_harness.h late in the 6.9 cycle, and because forcing
every test to #define _GNU_SOURCE is painful.
* Provide a global pseudo-RNG instance for all tests, so that library code can
generate random, but determinstic numbers.
* Use the global pRNG to randomly force emulation of select writes from guest
code on x86, e.g. to help validate KVM's emulation of locked accesses.
* Allocate and initialize x86's GDT, IDT, TSS, segments, and default exception
handlers at VM creation, instead of forcing tests to manually trigger the
related setup.
Documentation:
* Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZE878UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOukQf+LcvZsWtrC7Wd5K9SQbYXaS4Rk6P6
JHoQW2d0hUN893J2WibEw+l1J/0vn5JumqHXyZgJ7CbaMtXkWWQTwDSDLuURUKpv
XNB3Sb17G87NH+s1tOh0tA9h5upbtlHVHvrtIwdbb9+XHgQ6HTL4uk+HdfO/p9fW
cWBEZAKoWcCIa99Numv3pmq5vdrvBlNggwBugBS8TH69EKMw+V1Vu1SFkIdNDTQk
NJJ28cohoP3wnwlIHaXSmU4RujipPH3Lm/xupyA5MwmzO713eq2yUqV49jzhD5/I
MA4Ruvgrdm4wpp89N9lQMyci91u6q7R9iZfMu0tSg2qYI3UPKIdstd8sOA==
=2lED
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Move a lot of state that was previously stored on a per vcpu basis
into a per-CPU area, because it is only pertinent to the host while
the vcpu is loaded. This results in better state tracking, and a
smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in nested
virtualisation. The last two instructions also require emulating
part of the pointer authentication extension. As a result, the trap
handling of pointer authentication has been greatly simplified.
- Turn the global (and not very scalable) LPI translation cache into
a per-ITS, scalable cache, making non directly injected LPIs much
cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing for
smaller EL2 mapping and some flexibility in implementing more or
less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR map has
been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
LoongArch:
- Add ParaVirt IPI support
- Add software breakpoint support
- Add mmio trace events support
RISC-V:
- Support guest breakpoints using ebreak
- Introduce per-VCPU mp_state_lock and reset_cntx_lock
- Virtualize SBI PMU snapshot and counter overflow interrupts
- New selftests for SBI PMU and Guest ebreak
- Some preparatory work for both TDX and SNP page fault handling.
This also cleans up the page fault path, so that the priorities of
various kinds of fauls (private page, no memory, write to read-only
slot, etc.) are easier to follow.
x86:
- Minimize amount of time that shadow PTEs remain in the special
REMOVED_SPTE state.
This is a state where the mmu_lock is held for reading but
concurrent accesses to the PTE have to spin; shortening its use
allows other vCPUs to repopulate the zapped region while the zapper
finishes tearing down the old, defunct page tables.
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID
field, which is defined by hardware but left for software use.
This lets KVM communicate its inability to map GPAs that set bits
51:48 on hosts without 5-level nested page tables. Guest firmware
is expected to use the information when mapping BARs; this avoids
that they end up at a legal, but unmappable, GPA.
- Fixed a bug where KVM would not reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- As usual, a bunch of code cleanups.
x86 (AMD):
- Implement a new and improved API to initialize SEV and SEV-ES VMs,
which will also be extendable to SEV-SNP.
The new API specifies the desired encryption in KVM_CREATE_VM and
then separately initializes the VM. The new API also allows
customizing the desired set of VMSA features; the features affect
the measurement of the VM's initial state, and therefore enabling
them cannot be done tout court by the hypervisor.
While at it, the new API includes two bugfixes that couldn't be
applied to the old one without a flag day in userspace or without
affecting the initial measurement. When a SEV-ES VM is created with
the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are rejected
once the VMSA has been encrypted. Also, the FPU and AVX state will
be synchronized and encrypted too.
- Support for GHCB version 2 as applicable to SEV-ES guests.
This, once more, is only accessible when using the new
KVM_SEV_INIT2 flow for initialization of SEV-ES VMs.
x86 (Intel):
- An initial bunch of prerequisite patches for Intel TDX were merged.
They generally don't do anything interesting. The only somewhat
user visible change is a new debugging mode that checks that KVM's
MMU never triggers a #VE virtualization exception in the guest.
- Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig
VM-Exit to L1, as per the SDM.
Generic:
- Use vfree() instead of kvfree() for allocations that always use
vcalloc() or __vcalloc().
- Remove .change_pte() MMU notifier - the changes to non-KVM code are
small and Andrew Morton asked that I also take those through the
KVM tree.
The callback was only ever implemented by KVM (which was also the
original user of MMU notifiers) but it had been nonfunctional ever
since calls to set_pte_at_notify were wrapped with
invalidate_range_start and invalidate_range_end... in 2012.
Selftests:
- Enhance the demand paging test to allow for better reporting and
stressing of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing
elapsed time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support
MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test wrapper
shell script, to play nice with running in a minimal userspace
environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able
to complete a reasonable number of KVM_RUNs, as the assert can fail
on a completely valid setup.
If the test is run on a large-ish system that is otherwise idle,
and the test isn't affined to a low-ish number of CPUs, the vCPU
task can be repeatedly migrated to CPUs that are in deep sleep
states, which results in the vCPU having very little net runtime
before the next migration due to high wakeup latencies.
- Define _GNU_SOURCE for all selftests to fix a warning that was
introduced by a change to kselftest_harness.h late in the 6.9
cycle, and because forcing every test to #define _GNU_SOURCE is
painful.
- Provide a global pseudo-RNG instance for all tests, so that library
code can generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes
from guest code on x86, e.g. to help validate KVM's emulation of
locked accesses.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default
exception handlers at VM creation, instead of forcing tests to
manually trigger the related setup.
Documentation:
- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (225 commits)
selftests/kvm: remove dead file
KVM: selftests: arm64: Test vCPU-scoped feature ID registers
KVM: selftests: arm64: Test that feature ID regs survive a reset
KVM: selftests: arm64: Store expected register value in set_id_regs
KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
KVM: arm64: Only reset vCPU-scoped feature ID regs once
KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
KVM: arm64: Rename is_id_reg() to imply VM scope
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: SEV: Allow per-guest configuration of GHCB protocol version
KVM: SEV: Add GHCB handling for termination requests
KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests
KVM: SEV: Add support to handle AP reset MSR protocol
KVM: x86: Explicitly zero kvm_caps during vendor module load
KVM: x86: Fully re-initialize supported_mce_cap on vendor module load
KVM: x86: Fully re-initialize supported_vm_types on vendor module load
KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns
KVM: x86/mmu: Initialize kvm_page_fault's pfn and hva to error values
...
The PCI subsystem already exposes the "sriov_numvfs" attribute
that users can use to enable or disable SR-IOV VFs. Add custom
implementation of the .sriov_configure callback defined by the
pci_driver to perform additional steps, including fair VFs
provisioning with the resources, as required by our platforms.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> #v2
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240506184121.2615-1-michal.wajdeczko@intel.com
Topics:
- Add CXL log related mailbox commands
- Add Get Log Capabilities command
- Add Get Supported Log Sub-List Commands command
- Add Clear Log command
- Add series for HPA to DPA translation for CXL events cxl_dram and cxl_general_media
- Add support to send CPER records to CXL for more detailed parsing.
Misc changes and fixes:
- Fix for compile warning of cxl_security_ops
- Add debug message for invalid interleave granularity
- Enhancement to cxl-test event testing
- Add dev_warn() on unsupported mixed mode decoder
- Fix use of phys_to_target_node() for x86
- Use helper function for decoder enum instead of open coding
- Include missing headers for cxl-event
- Fix MAINTAINERS file entry
- Fix cxlr_pmem memory leak
- Cleanup __cxl_parse_cfmws via scope-based resource menagement
- Convert cxl_pmem_region_alloc() to scope-based resource management
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE5DAy15EJMCV1R6v9YGjFFmlTOEoFAmZE5YcACgkQYGjFFmlT
OEo5ww/+KaerkOcC+B11R7+HHf4yfnbbOzBmBFIrRncWtaSoObq4CJyvjmG3cWL8
bP+SQ4MazruyPgW0MFUBBeTvJTXUrXDbv0vcCLLRPgcHAP/PROMh7u8LueCFXo/T
vd0II5OtmBm8aub3Ty5nNNdkgo1/rRmtlCLnBUD5q/om11ZbXWaEZS1ivBC9Dzlf
qVRe4EYYEldrQWeqRI8LNZIstNtYF/ifzN0T1DQ4ndPuc/9r+s2YLyohcVn1tCZx
mqeNj5wBldiLPe0QL8perqDbgJzZj8JX9rXgdj+4xUQcnoCBLMxiSn5XFmbIKgzf
c0Y9LeNR3Y3Ivy57Qd/dakeI6yhz9F0J8MR0ifEyHcmFNCXT13mikN0OoAuSeVRT
pkGuK/V8D3eF8a3wWn6CT4mJGdGDC8v2DDH2WK75+JrNAfgi4+V6GYUu1bHZMofY
C0BEolMBZQMmWtR+CYOYm8UAHSRfDyQg55JFaxbbQkc/PekY8TMVR4klUA/+54az
VL3RONeBxAYUksEoN7vVDhyAGCe1uiW3NyZOlLyRVqtB+X8ZFdh5eXxzhxxBaLKo
W1M7xo1nDlc/SAqIFOfU9mt99krVJyBi12IuFeTKG9tgO2nYhoazbN9Q4W3wbyEj
KU84YPFpuwEA9fIyRd8n7vDfe3QbMVL3Xt84MlMcHLlFgBSeUKE=
=rCAo
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
- Three CXL mailbox passthrough commands are added to support the
populating and clearing of vendor debug logs:
- Get Log Capabilities
- Get Supported Log Sub-List Commands
- Clear Log
- Add support of Device Phyiscal Address (DPA) to Host Physical Address
(HPA) translation for CXL events of cxl_dram and cxl_general media.
This allows user space to figure out which CXL region the event
occured via trace event.
- Connect CXL to CPER reporting.
If a device is configured for firmware first, CXL event records are
not sent directly to the host. Those records are reported through EFI
Common Platform Error Records (CPER). Add support to route the CPER
records through the CXL sub-system in order to provide DPA to HPA
translation and also event decoding and tracing. This is useful for
users to determine which system issues may correspond to specific
hardware events.
- A number of misc cleanups and fixes:
- Fix for compile warning of cxl_security_ops
- Add debug message for invalid interleave granularity
- Enhancement to cxl-test event testing
- Add dev_warn() on unsupported mixed mode decoder
- Fix use of phys_to_target_node() for x86
- Use helper function for decoder enum instead of open coding
- Include missing headers for cxl-event
- Fix MAINTAINERS file entry
- Fix cxlr_pmem memory leak
- Cleanup __cxl_parse_cfmws via scope-based resource menagement
- Convert cxl_pmem_region_alloc() to scope-based resource management
* tag 'cxl-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
cxl/cper: Remove duplicated GUID defines
cxl/cper: Fix non-ACPI-APEI-GHES build
cxl/pci: Process CPER events
acpi/ghes: Process CXL Component Events
cxl/region: Convert cxl_pmem_region_alloc to scope-based resource management
cxl/acpi: Cleanup __cxl_parse_cfmws()
cxl/region: Fix cxlr_pmem leaks
cxl/core: Add region info to cxl_general_media and cxl_dram events
cxl/region: Move cxl_trace_hpa() work to the region driver
cxl/region: Move cxl_dpa_to_region() work to the region driver
cxl/trace: Correct DPA field masks for general_media & dram events
MAINTAINERS: repair file entry in COMPUTE EXPRESS LINK
cxl/cxl-event: include missing <linux/types.h> and <linux/uuid.h>
cxl/hdm: Debug, use decoder name function
cxl: Fix use of phys_to_target_node() for x86
cxl/hdm: dev_warn() on unsupported mixed mode decoder
cxl/test: Enhance event testing
cxl/hdm: Add debug message for invalid interleave granularity
cxl: Fix compile warning for cxl_security_ops extern
cxl/mbox: Add Clear Log mailbox command
...
Code cleanups, remove duplicate code, and updates for current
interfaces.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQSgX9xt+GwmrJEQ+euebuN7TNx1MQUCZkThOhQcaXJhLndlaW55
QGludGVsLmNvbQAKCRCebuN7TNx1MWUvAP9VuWLTc+bCguRMbArOsdE2T60780pR
DT12KXfwm/FvKAD9Hyz8S2CkwvdlwC5hqH2AmdpzDhpJ1f9LBpcsb6GUKwk=
=eZC/
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm updates from Ira Weiny:
"The changes include removing duplicate code and updating the nvdimm
tree to the current kernel interfaces such as using const for struct
device_type and changing the platform remove callback signature"
* tag 'libnvdimm-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: remove redundant assignment to variable rc
ndtest: Convert to platform remove callback returning void
nvdimm/btt: always set max_integrity_segments
nvdimm: remove nd_integrity_init
dax: constify the struct device_type usage
powerpc/papr_scm: Move duplicate definitions to common header files
Remove wrong mask on subsys_vendor_id. Both the Vendor ID and Subsystem
Vendor ID are u16 variables and are written to a u32 register of the
controller. The Subsystem Vendor ID was always 0 because the u16 value
was masked incorrectly with GENMASK(31,16) resulting in all lower 16
bits being set to 0 prior to the shift.
Remove both masks as they are unnecessary and set the register correctly
i.e., the lower 16-bits are the Vendor ID and the upper 16-bits are the
Subsystem Vendor ID.
This is documented in the RK3399 TRM section 17.6.7.1.17
[kwilczynski: removed unnecesary newline]
Fixes: cf590b0783 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Link: https://lore.kernel.org/linux-pci/20240403144508.489835-1-rick.wertenbroek@gmail.com
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Finally something fun. Mike Rapoport does some cleanup to allow us to
take out module_alloc() out of modules into a new paint shedded execmem_alloc()
and execmem_free() so to make emphasis these helpers are actually used outside
of modules. It starts with a no-functional changes API rename / placeholders
to then allow architectures to define their requirements into a new shiny
struct execmem_info with ranges, and requirements for those ranges. Archs
now can intitialize this execmem_info as the last part of mm_core_init() if
they have to diverge from the norm. Each range is a known type clearly
articulated and spelled out in enum execmem_type.
Although a lot of this is major cleanup and prep work for future enhancements an
immediate clear gain is we get to enable KPROBES without MODULES now. That is
ultimately what motiviated to pick this work up again, now with smaller goal as
concrete stepping stone.
This has been sitting on linux-next for a little less than a month, a few issues
were found already and fixed, in particular an odd mips boot issue. Arch folks
reviewed the code too. This is ready for wider exposure and testing.
-----BEGIN PGP SIGNATURE-----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=Nsg4
-----END PGP SIGNATURE-----
Merge tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Finally something fun. Mike Rapoport does some cleanup to allow us to
take out module_alloc() out of modules into a new paint shedded
execmem_alloc() and execmem_free() so to make emphasis these helpers
are actually used outside of modules.
It starts with a non-functional changes API rename / placeholders to
then allow architectures to define their requirements into a new shiny
struct execmem_info with ranges, and requirements for those ranges.
Archs now can intitialize this execmem_info as the last part of
mm_core_init() if they have to diverge from the norm. Each range is a
known type clearly articulated and spelled out in enum execmem_type.
Although a lot of this is major cleanup and prep work for future
enhancements an immediate clear gain is we get to enable KPROBES
without MODULES now. That is ultimately what motiviated to pick this
work up again, now with smaller goal as concrete stepping stone"
* tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of
kprobes: remove dependency on CONFIG_MODULES
powerpc: use CONFIG_EXECMEM instead of CONFIG_MODULES where appropriate
x86/ftrace: enable dynamic ftrace without CONFIG_MODULES
arch: make execmem setup available regardless of CONFIG_MODULES
powerpc: extend execmem_params for kprobes allocations
arm64: extend execmem_info for generated code allocations
riscv: extend execmem_params for generated code allocations
mm/execmem, arch: convert remaining overrides of module_alloc to execmem
mm/execmem, arch: convert simple overrides of module_alloc to execmem
mm: introduce execmem_alloc() and execmem_free()
module: make module_memory_{alloc,free} more self-contained
sparc: simplify module_alloc()
nios2: define virtual address space for modules
mips: module: rename MODULE_START to MODULES_VADDR
arm64: module: remove unneeded call to kasan_alloc_module_shadow()
kallsyms: replace deprecated strncpy with strscpy
module: allow UNUSED_KSYMS_WHITELIST to be relative against objtree.
Consensus on the mailing lists is that panels shouldn't use a table of
init commands but should instead use init functions. We'll use the
same concepts as the recently introduced
mipi_dsi_generic_write_seq_multi() to make this clean/easy and also
not bloat the driver too much. Measuring before/after this change:
$ scripts/bloat-o-meter \
.../before/panel-innolux-p079zca.ko \
.../after/panel-innolux-p079zca.ko
add/remove: 3/2 grow/shrink: 0/1 up/down: 2356/-1944 (412)
Function old new delta
innolux_p097pfg_init - 1772 +1772
innolux_p097pfg_init.d - 480 +480
innolux_panel_write_multi - 104 +104
innolux_panel_prepare 412 308 -104
.compoundliteral 480 - -480
innolux_p097pfg_init_cmds 1360 - -1360
Total: Before=5802, After=6214, chg +7.10%
Note that, unlike some other drivers, we actually make this panel
driver _bigger_ by using the new functions. This is because the
innolux-p079zca panel driver didn't have as complex of a table and
thus the old table was more efficient than the code. The bloat is
still not giant (only 412 bytes).
Also note that we can't direclty use
mipi_dsi_generic_write_seq_multi() here because we need to deal with
the crazy "nop" that this driver sends after all commands. This means
that we have to write code that is "inspired" by the new macros.
Since we're touching all the tables, let's also convert hex numbers to
lower case as per kernel conventions.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.9.I947e28c81f9ef7dcd3add6e193be72d6f8ea086f@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.9.I947e28c81f9ef7dcd3add6e193be72d6f8ea086f@changeid
Consensus on the mailing lists is that panels shouldn't use a table of
init commands but should instead use init functions. With the recently
introduced mipi_dsi_dcs_write_seq_multi() this is not only clean/easy
but also saves space. Measuring before/after this change:
$ scripts/bloat-o-meter \
.../before/panel-ilitek-ili9882t.ko \
.../after/panel-ilitek-ili9882t.ko
add/remove: 3/2 grow/shrink: 0/2 up/down: 6834/-8177 (-1343)
Function old new delta
starry_ili9882t_init - 6152 +6152
starry_ili9882t_init.d - 678 +678
ili9882t_disable.d - 4 +4
ili9882t_disable 260 228 -32
ili9882t_prepare 540 396 -144
.compoundliteral 681 - -681
starry_ili9882t_init_cmd 7320 - -7320
Total: Before=11928, After=10585, chg -11.26%
Let's do the conversion.
Since we're touching all the tables, let's also convert hex numbers to
lower case as per kernel conventions.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.8.I407b977f9508573103491df549dfaffc3688db13@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.8.I407b977f9508573103491df549dfaffc3688db13@changeid
This is a mechanical conversion of the novatek-nt36672e driver to use
the new mipi_dsi_dcs_write_seq_multi(). The new function is easier for
clients to understand and using it also causes smaller code to be
generated. Specifically:
$ scripts/bloat-o-meter \
...after/panel-novatek-nt36672e.ko \
...ctx/panel-novatek-nt36672e.ko
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-988 (-988)
Function old new delta
nt36672e_1080x2408_60hz_init 6236 5248 -988
Total: Before=10651, After=9663, chg -9.28%
Cc: Ritesh Kumar <quic_riteshk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.6.I3c08a7d02c467d2bc88da14e513ea4c8649fce45@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.6.I3c08a7d02c467d2bc88da14e513ea4c8649fce45@changeid
The current mipi_dsi_*_write_seq() macros are non-intutitive because
they contain a hidden "return" statement that will return out of the
_caller_ of the macro. Let's mark them as deprecated and instead
introduce some new macros that are more intuitive.
These new macros are less optimal when an error occurs but should
behave more optimally when there is no error. Specifically these new
macros cause smaller code to get generated and the code size savings
(less to fetch from RAM, less cache space used, less RAM used) are
important. Since the error case isn't something we need to optimize
for and these new macros are easier to understand and more flexible,
they should be used.
After converting to use these new functions, one example shows some
nice savings while also being easier to understand.
$ scripts/bloat-o-meter \
...after/panel-novatek-nt36672e.ko \
...ctx/panel-novatek-nt36672e.ko
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-988 (-988)
Function old new delta
nt36672e_1080x2408_60hz_init 6236 5248 -988
Total: Before=10651, After=9663, chg -9.28%
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.5.Ie94246c30fe95101e0e26dd5f96e976dbeb8f242@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.5.Ie94246c30fe95101e0e26dd5f96e976dbeb8f242@changeid
Through a cooperative effort between Hsin-Yi Wang and Dmitry
Baryshkov, we have realized the dev_err() in the
mipi_dsi_*_write_seq() macros was causing quite a bit of bloat to the
kernel. Let's hoist this call into drm_mipi_dsi.c by adding a "chatty"
version of the functions that includes the print. While doing this,
add a bit more comments to these macros making it clear that they
print errors and also that they return out of _the caller's_ function.
Without any changes to clients this gives a nice savings. Specifically
the macro was inlined and thus the error report call was inlined into
every call to mipi_dsi_dcs_write_seq() and
mipi_dsi_generic_write_seq(). By using a call to a "chatty" function,
the usage is reduced to one call in the chatty function and a function
call at the invoking site.
Building with my build system shows one example:
$ scripts/bloat-o-meter \
.../before/panel-novatek-nt36672e.ko \
.../after/panel-novatek-nt36672e.ko
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-4404 (-4404)
Function old new delta
nt36672e_1080x2408_60hz_init 10640 6236 -4404
Total: Before=15055, After=10651, chg -29.25%
Note that given the change in location of the print it's harder to
include the "cmd" in the printout for mipi_dsi_dcs_write_seq() since,
theoretically, someone could call the new chatty function with a
zero-size array and it would be illegal to dereference data[0].
There's a printk format to print the whole buffer and this is probably
more useful for debugging anyway. Given that we're doing this for
mipi_dsi_dcs_write_seq(), let's also print the buffer for
mipi_dsi_generic_write_seq() in the error case.
It should be noted that the current consensus of DRM folks is that the
mipi_dsi_*_write_seq() should be deprecated due to the non-intuitive
return behavior. A future patch will formally mark them as deprecated
and provide an alternative.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.4.Id15fae80582bc74a0d4f1338987fa375738f45b9@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.4.Id15fae80582bc74a0d4f1338987fa375738f45b9@changeid
We really don't expect these errors to be printed over and over
again. When a driver hits the error it should bail out. Just use a
normal error print.
This gives a nice space savings for users of these functions:
$ scripts/bloat-o-meter \
.../before/panel-novatek-nt36672e.ko \
.../after/panel-novatek-nt36672e.ko
add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-16760 (-16760)
Function old new delta
nt36672e_1080x2408_60hz_init 17080 10640 -6440
nt36672e_1080x2408_60hz_init._rs 10320 - -10320
Total: Before=31815, After=15055, chg -52.68%
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.3.I9982cd5d8014de7a4513f5619f66f88da49ce4ec@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.3.I9982cd5d8014de7a4513f5619f66f88da49ce4ec@changeid
The mipi_dsi_generic_write_seq() macro makes a call to
mipi_dsi_generic_write() which returns a type ssize_t. The macro then
stores it in an int and checks to see if it's negative. This could
theoretically be a problem if "ssize_t" is larger than "int".
To see the issue, imagine that "ssize_t" is 32-bits and "int" is
16-bits, you could see a problem if there was some code out there that
looked like:
mipi_dsi_generic_write_seq(dsi, <32768 bytes as arguments>);
...since we'd get back that 32768 bytes were transferred and 32768
stored in a 16-bit int would look negative.
Though there are no callsites where we'd actually hit this (even if
"int" was only 16-bit), it's cleaner to make the types match so let's
fix it.
Fixes: a9015ce593 ("drm/mipi-dsi: Add a mipi_dsi_dcs_write_seq() macro")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.2.Iadb65b8add19ed3ae3ed6425011beb97e380a912@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.2.Iadb65b8add19ed3ae3ed6425011beb97e380a912@changeid
The mipi_dsi_dcs_write_seq() macro makes a call to
mipi_dsi_dcs_write_buffer() which returns a type ssize_t. The macro
then stores it in an int and checks to see if it's negative. This
could theoretically be a problem if "ssize_t" is larger than "int".
To see the issue, imagine that "ssize_t" is 32-bits and "int" is
16-bits, you could see a problem if there was some code out there that
looked like:
mipi_dsi_dcs_write_seq(dsi, cmd, <32767 bytes as arguments>);
...since we'd get back that 32768 bytes were transferred and 32768
stored in a 16-bit int would look negative.
Though there are no callsites where we'd actually hit this (even if
"int" was only 16-bit), it's cleaner to make the types match so let's
fix it.
Fixes: 2a9e9daf75 ("drm/mipi-dsi: Introduce mipi_dsi_dcs_write_seq macro")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240514102056.v5.1.I30fa4c8348ea316c886ef8a522a52fed617f930d@changeid
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514102056.v5.1.I30fa4c8348ea316c886ef8a522a52fed617f930d@changeid
Booting an LPAE-enabled kernel built with CONFIG_CC_OPTIMIZE_FOR_SIZE=y
fails when starting userspace:
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
CPU: 1 PID: 1 Comm: init Tainted: G W N 6.9.0-rc1-koelsch-00004-g7af5b901e847 #1930
Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x78/0xa8
dump_stack_lvl from panic+0x118/0x398
panic from do_exit+0x1ec/0x938
do_exit from sys_exit_group+0x0/0x10
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 ]---
Add the missing memory clobber to cpu_set_ttbcr(), as suggested by
Russell King.
Force inlining of uaccess_save_and_enable(), as suggested by Ard
Biesheuvel.
The latter fixes booting on Koelsch.
Closes: https://lore.kernel.org/r/CAMuHMdWTAJcZ9BReWNhpmsgkOzQxLNb5OhNYxzxv6D5TSh2fwQ@mail.gmail.com/
Fixes: 7af5b901e8 ("ARM: 9358/2: Implement PAN for LPAE by TTBR0 page table walks disablement")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Even if we have not enabled SR-IOV support using the platform
specific has_sriov flag, the hardware may still report SR-IOV
capability and the PCI layer may wrongly advertise driver support
to enable VFs. Explicitly reset the number of supported VFs to
zero to avoid confusion.
Applications may read the /sys/bus/pci/devices/.../sriov_totalvfs
prior to enabling VFs using the sriov_numvfs to check if such an
operation is possible.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240507165757.2835-1-michal.wajdeczko@intel.com
-----BEGIN PGP SIGNATURE-----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=RBMT
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching update from Petr Mladek:
- Use more informative names for the livepatch transition states
* tag 'livepatching-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Rename KLP_* to KLP_TRANSITION_*
-----BEGIN PGP SIGNATURE-----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=y45P
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Use no_printk() instead of "if (0) printk()" constructs to avoid
generating printk index for messages disabled at compile time
- Remove deprecated strncpy/strcpy from printk.c
- Remove redundant CONFIG_BASE_FULL in favor of CONFIG_BASE_SMALL
* tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: cleanup deprecated uses of strncpy/strcpy
printk: Remove redundant CONFIG_BASE_FULL
printk: Change type of CONFIG_BASE_SMALL to bool
printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
ceph: Use no_printk() helper
dyndbg: Use *no_printk() helpers
dev_printk: Add and use dev_no_printk()
printk: Let no_printk() use _printk()
