We can use upd_ctx.timedout_mask directly, and the faulty_slots update
in the flush_caches_failed situation is never used.
Suggested-by: Suggested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425103920.826458-1-boris.brezillon@collabora.com
Relatively calm week, likely due to public holiday in most places.
No known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmYzaRsSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkh70P/jzsTsvzHspu3RUwcsyvWpSoJPcxP2tF
5SKR66o8sbSjB5I26zUi/LtRZgbPO32GmLN2Y8GvP74h9lwKdDo4AY4volZKCT6f
lRG6GohvMa0lSPSn1fti7CKVzDOsaTHvLz3uBBr+Xb9ITCKh+I+zGEEDGj/47SQN
tmDWHPF8OMs2ezmYS5NqRIQ3CeRz6uyLmEoZhVm4SolypZ18oEg7GCtL3u6U48n+
e3XB3WwKl0ZxK8ipvPgUDwGIDuM5hEyAaeNon3zpYGoqitRsRITUjULpb9dT4DtJ
Jma3OkarFJNXgm4N/p/nAtQ9AdiAloF9ivZXs2t0XCdrrUZJUh05yuikoX+mLfpw
GedG2AbaVl6mdqNkrHeyf5SXKuiPgeCLVfF2xMjS0l1kFbY+Bt8BqnRSdOrcoUG0
zlSzBeBtajttMdnalWv2ZshjP8uo/NjXydUjoVNwuq8xGO5wP+zhNnwhOvecNyUg
t7q2PLokahlz4oyDqyY/7SQ0hSEndqxOlt43I6CthoWH0XkS83nTPdQXcTKQParD
ntJUk5QYwefUT1gimbn/N8GoP7a1+ysWiqcf/7+SNm932gJGiDt36+HOEmyhIfIG
IDWTWJJW64SnPBIUw59MrG7hMtbfaiZiFQqeUJQpFVrRr+tg5z5NUZ5thA+EJVd8
qiVDvmngZFiv
=f6KY
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Relatively calm week, likely due to public holiday in most places. No
known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates"
* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
MAINTAINERS: remove Ariel Elior
net: gro: add flush check in udp_gro_receive_segment
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
ipv4: Fix uninit-value access in __ip_make_skb()
s390/qeth: Fix kernel panic after setting hsuid
vxlan: Pull inner IP header in vxlan_rcv().
tipc: fix a possible memleak in tipc_buf_append
tipc: fix UAF in error path
rxrpc: Clients must accept conn from any address
net: core: reject skb_copy(_expand) for fraglist GSO skbs
net: bridge: fix multicast-to-unicast with fraglist GSO
mptcp: ensure snd_nxt is properly initialized on connect
e1000e: change usleep_range to udelay in PHY mdic access
net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
cxgb4: Properly lock TX queue for the selftest.
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
vxlan: Add missing VNI filter counter update in arp_reduce().
vxlan: Fix racy device stats updates.
net: qede: use return from qede_parse_actions()
...
Intel hardware is capable of programming the Maud/Naud SDPs on its
own based on real-time clocks. While doing so, it takes care
of any deviations from the theoretical values. Programming the registers
explicitly with static values can interfere with this logic. Therefore,
let the HW decide the Maud and Naud SDPs on it's own.
Cc: stable@vger.kernel.org # v5.17
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8097
Co-developed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430091825.733499-1-chaitanya.kumar.borah@intel.com
The kvm_pi_irte_update tracepoint is called from both SVM and VMX vendor
code, and while the "posted interrupt" naming is also adopted by SVM in
several places, VT-d specifically refers to Intel's "Virtualization
Technology for Directed I/O".
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Link: https://lore.kernel.org/r/20240418021823.1275276-3-alejandro.j.jimenez@oracle.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the APICv enablement status to determine if APICV_INHIBIT_REASON_ABSENT
needs to be set, instead of unconditionally setting the reason during
initialization.
Specifically, in cases where AVIC is disabled via module parameter or lack
of hardware support, unconditionally setting an inhibit reason due to the
absence of an in-kernel local APIC can lead to a scenario where the reason
incorrectly remains set after a local APIC has been created by either
KVM_CREATE_IRQCHIP or the enabling of KVM_CAP_IRQCHIP_SPLIT. This is
because the helpers in charge of removing the inhibit return early if
enable_apicv is not true, and therefore the bit remains set.
This leads to confusion as to the cause why APICv is not active, since an
incorrect reason will be reported by tracepoints and/or a debugging tool
that examines the currently set inhibit reasons.
Fixes: ef8b4b7203 ("KVM: ensure APICv is considered inactive if there is no APIC")
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Link: https://lore.kernel.org/r/20240418021823.1275276-2-alejandro.j.jimenez@oracle.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Since commit a2ad63daa8 ("VFS: add FMODE_CAN_ODIRECT file flag") file
systems can just set the FMODE_CAN_ODIRECT flag at open time instead of
wiring up a dummy direct_IO method to indicate support for direct I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[RH: Rebased to upstream]
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/e5797bb597219a49043e53e4e90aa494b97dc328.1709215665.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Several other "dup"-style interfaces could use the __realloc_size()
attribute. (As a reminder to myself and others: "realloc" is used here
instead of "alloc" because the "alloc_size" attribute implies that the
memory contents are uninitialized. Since we're copying contents into the
resulting allocation, it must use "realloc_size" to avoid confusing the
compiler's optimization passes.)
Add KUnit test coverage where possible. (KUnit still does not have the
ability to manipulate userspace memory.)
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240502145218.it.729-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Truncate operation can race with writeback, in which inode->i_size can get
truncated and therefore size - folio_pos() can be negative. This fixes the
len calculation. However this path doesn't get easily triggered even
with data journaling.
Cc: stable@kernel.org # v6.5
Fixes: 80be8c5cc9 ("Fixes: ext4: Make mpage_journal_page_buffers use folio")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/cff4953b5c9306aba71e944ab176a5d396b9a1b7.1709182250.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add full memory barriers in kvm_mmu_track_write() and account_shadowed()
to plug a (very, very theoretical) race where kvm_mmu_track_write() could
miss a 0->1 transition of indirect_shadow_pages and fail to zap relevant,
*stale* SPTEs.
Without the barriers, because modern x86 CPUs allow (per the SDM):
Reads may be reordered with older writes to different locations but not
with older writes to the same location.
it's possible that the following could happen (terms of values being
visible/resolved):
CPU0 CPU1
read memory[gfn] (=Y)
memory[gfn] Y=>X
read indirect_shadow_pages (=0)
indirect_shadow_pages 0=>1
or conversely:
CPU0 CPU1
indirect_shadow_pages 0=>1
read indirect_shadow_pages (=0)
read memory[gfn] (=Y)
memory[gfn] Y=>X
E.g. in the below scenario, CPU0 could fail to zap SPTEs, and CPU1 could
fail to retry the faulting instruction, resulting in a KVM entering the
guest with a stale SPTE (map PTE=X instead of PTE=Y).
PTE = X;
CPU0:
emulator_write_phys()
PTE = Y
kvm_page_track_write()
kvm_mmu_track_write()
// memory barrier missing here
if (indirect_shadow_pages)
zap();
CPU1:
FNAME(page_fault)
FNAME(walk_addr)
FNAME(walk_addr_generic)
gw->pte = PTE; // X
FNAME(fetch)
kvm_mmu_get_child_sp
kvm_mmu_get_shadow_page
__kvm_mmu_get_shadow_page
kvm_mmu_alloc_shadow_page
account_shadowed
indirect_shadow_pages++
// memory barrier missing here
if (FNAME(gpte_changed)) // if (PTE == X)
return RET_PF_RETRY;
In practice, this bug likely cannot be observed as both the 0=>1
transition and reordering of this scope are extremely rare occurrences.
Note, if the cost of the barrier (which is simply a locked ADD, see commit
450cbdd012 ("locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE")),
is problematic, KVM could avoid the barrier by bailing earlier if checking
kvm_memslots_have_rmaps() is false. But the odds of the barrier being
problematic is extremely low, *and* the odds of the extra checks being
meaningfully faster overall is also low.
Link: https://lore.kernel.org/r/20240423193114.2887673-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
xfs_inode.i_flags is an unsigned long, so make these helpers take that
as the flags argument instead of unsigned short. This is needed for the
next patch.
While we're at it, remove the iflags variable from xfs_iget_cache_miss
because we no longer need it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Clean up the type signature of this function since we don't have
negative attr lengths or block counts.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a helper function to compute the number of fsblocks needed to
store a maximally-sized extended attribute value.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Turn this into a properly typechecked function, and actually use the
correct blocksize for extended attributes. The function cannot be
static inline because xfsprogs userspace uses it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In the next few patches we're going to refactor the attr remote code so
that we can support headerless remote xattr values for storing merkle
tree blocks. For now, let's change the code to use unsigned int to
describe quantities of bytes and blocks that cannot be negative.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Remove kvm_make_all_cpus_request_except() as it effectively has no users,
and arguably should never have been added in the first place.
Commit 54163a346d ("KVM: Introduce kvm_make_all_cpus_request_except()")
added the "except" variation for use in SVM's AVIC update path, which used
it to skip sending a request to the current vCPU (commit 7d611233b0
("KVM: SVM: Disable AVIC before setting V_IRQ")).
But the AVIC usage of kvm_make_all_cpus_request_except() was essentially a
hack-a-fix that simply squashed the most likely scenario of a racy WARN
without addressing the underlying problem(s). Commit f1577ab214 ("KVM:
SVM: svm_set_vintr don't warn if AVIC is active but is about to be
deactivated") eventually fixed the WARN itself, and the "except" usage was
subsequently dropped by df63202fe5 ("KVM: x86: APICv: drop immediate
APICv disablement on current vCPU").
That kvm_make_all_cpus_request_except() hasn't gained any users in the
last ~3 years isn't a coincidence. If a VM-wide broadcast *needs* to skip
the current vCPU, then odds are very good that there is underlying bug
that could be better fixed elsewhere.
Signed-off-by: Venkatesh Srinivas <venkateshs@chromium.org>
Link: https://lore.kernel.org/r/20240404232651.1645176-1-venkateshs@chromium.org
[sean: rewrite changelog with --verbose]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Coccinelle reports a warning
WARNING: NULL check before dev_{put, hold} functions is not needed
The reason is the call netdev_{put, hold} of dev_{put,hold} will check NULL
There is no need to check before using dev_{put, hold}
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/ZjGDFatHRMI6Eg7M@octinomon.home
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Coccinelle reports a warning
WARNING: NULL check before dev_{put, hold} functions is not needed
The reason is the call netdev_{put, hold} of dev_{put,hold} will check NULL
There is no need to check before using dev_{put, hold}
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Link: https://lore.kernel.org/r/ZjGC4qXrOwZE0aHi@octinomon.home
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When the config validation functions are warning about ETMv3, they do it
based on "not ETMv4". If the drivers aren't all loaded or the hardware
doesn't support Coresight it will appear as "not ETMv4" and then Perf
will print the error message "... not supported in ETMv3 ..." which is
wrong and confusing.
cs_etm_is_etmv4() is also misnamed because it also returns true for
ETE because ETE has a superset of the ETMv4 metadata files. Although
this was always done in the correct order so it wasn't a bug.
Improve all this by making a single get version function which also
handles not present as a separate case. Change the ETMv3 error message
to only print when ETMv3 is detected, and add a new error message for
the not present case.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Leo Yan <leo.yan@linux.dev>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240501135753.508022-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Most functions already have cs_etm_pmu, so it's a bit neater to pass
it through rather than itr only to convert it again.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240501135753.508022-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Most of seq_puts() usages are done with a string literal. In such cases,
the length of the string car be computed at compile time in order to save
a strlen() call at run-time. seq_putc() or seq_write() can then be used
instead.
This saves a few cycles.
To have an estimation of how often this optimization triggers:
$ git grep seq_puts.*\" | wc -l
3436
$ git grep seq_puts.*\".\" | wc -l
84
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/a8589bffe4830dafcb9111e22acf06603fea7132.1713781332.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christian Brauner <brauner@kernel.org>
The output for seq_putc() generation has also be checked and works.
Michael Chan says:
====================
bnxt_en: Updates for net-next
The first patch converts the sw_stats field in the completion
ring structure to a pointer. This allows the group of
completion rings using the same MSIX to share the same sw_stats
structure. Prior to this, the correct completion ring must be
used to count packets.
The next four patches remove the RTNL lock when calling the RoCE
driver for asynchronous stop and start during error recovery and
firmware reset. The RTNL ilock is replaced with a private mutex
used to synchronize RoCE register, unregister, stop, and start.
The last patch adds VF PCI IDs for the 5760X chips.
v2: Dropped patch #1 from v1. Will work with David to get that
patch in separately.
====================
Link: https://lore.kernel.org/r/20240501003056.100607-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No driver logic changes are required to support the VFs, so just add
the VF PCI ID.
Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the error recovery path (AER, firmware recovery, etc), the
driver notifies the RoCE driver via ULP_STOP before the reset
and via ULP_START after the reset, all under RTNL_LOCK. The
RoCE driver can take a long time if there are a lot of QPs to
destroy, so it is not ideal to hold the global RTNL lock.
Rely on the new en_dev_lock mutex instead for ULP_STOP and
ULP_START. For the most part, we move the ULP_STOP call before
we take the RTNL lock and move the ULP_START after RTNL unlock.
Note that SRIOV re-enablement must be done after ULP_START
or RoCE on the VFs will not resume properly after reset.
The one scenario in bnxt_hwrm_if_change() where the RTNL lock
is already taken in the .ndo_open() context requires the ULP
restart to be deferred to the bnxt_sp_task() workqueue.
Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current scheme relies heavily on the RTNL lock for all ULP
operations between the L2 and the RoCE driver. Add a new en_dev_lock
mutex so that the asynchronous ULP_STOP and ULP_START operations
can be serialized with bnxt_register_dev() and bnxt_unregister_dev()
calls without relying on the RTNL lock. The next patch will remove
the RTNL lock from the ULP_STOP and ULP_START calls.
Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no need to call ULP_STOP and ULP_START before and after the
L2 reset in bnxt_reset_task(). This L2 reset is done after detecting
TX timeout, RX ring errors, or VF config changes. The L2 reset does
not affect RoCE since the firmware is not reset and the backing store
is left alone.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Offline self test is a very disruptive operation for RoCE and requires
all active QPs to be destroyed. With a large number of QPs, it can
take a long time to destroy all the QPs and can timeout. Do not allow
ethtool offline self test if the RoCE driver is registered on the
device.
Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On P5_PLUS chips and later, the NQ rings have subrings for RX and TX
completions respectively. These subrings are passed to the poll
function instead of the base NQ, but each ring carries its own
copy of the software ring statistics.
For stats to be conveniently accessible in __bnxt_poll_work(), the
statistics memory should either be shared between the NQ and its
subrings or the subrings need to be included in the ethtool stats
aggregation logic. This patch opts for the former, because it's more
efficient and less confusing having the software statistics for a
ring exist in a single place.
Before this patch, the counter will not be displayed if the "wrong"
cpr->sw_stats was used to increment a counter.
Link: https://lore.kernel.org/netdev/CACKFLikEhVAJA+osD7UjQNotdGte+fth7zOy7yDdLkTyFk9Pyw@mail.gmail.com/
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240501003056.100607-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The perf_cpu struct makes some iterators simpler and avoids some
mistakes with interchanging CPU IDs with indexes etc. At the moment in
this file the conversion to an integer is done somewhere in the middle
of the call tree. Change it to delay the conversion to an int until the
leaf functions.
Some of the usage patterns are duplicated, so instead of changing them
all, make cs_etm_get_ro() more reusable and use that everywhere.
cs_etm_get_ro() didn't return an error before, but return one now so
that it can also be used where an error is needed. Continue to ignore
the error where it was already ignored.
Use cs_etm_pmu_path_exists() instead of cs_etm_get_ro() in
cs_etm_is_etmv4() because cs_etm_get_ro() prints a warning, but path
exists is sufficient for this use case.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240501135753.508022-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When handling userspace writes to immutable feature MSRs for a vCPU that
has already run, fall through into the normal code to set the MSR instead
of immediately returning '0'. I.e. allow such writes, instead of ignoring
such writes. This fixes a bug where KVM incorrectly allows writes to the
VMX MSRs that enumerate which CR{0,4} can be set, but only if the vCPU has
already run.
The intent of returning '0' and thus ignoring the write, was to avoid any
side effects, e.g. refreshing the PMU and thus doing weird things with
perf events while the vCPU is running. That approach sounds nice in
theory, but in practice it makes it all but impossible to maintain a sane
ABI, e.g. all VMX MSRs return -EBUSY if the CPU is post-VMXON, and the VMX
MSRs for fixed-1 CR bits are never writable, etc.
As for refreshing the PMU, kvm_set_msr_common() explicitly skips the PMU
refresh if MSR_IA32_PERF_CAPABILITIES is being written with the current
value, specifically to avoid unwanted side effects. And if necessary,
adding similar logic for other MSRs is not difficult.
Fixes: 0094f62c7e ("KVM: x86: Disallow writes to immutable feature MSRs after KVM_RUN")
Reported-by: Jim Mattson <jmattson@google.com>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20240408231500.1388122-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tony Nguyen says:
====================
i40e: cleanups & refactors
Ivan Vecera says:
This series do following:
Patch 1 - Removes write-only flags field from i40e_veb structure and
from i40e_veb_setup() parameters
Patch 2 - Refactors parameter of i40e_notify_client_of_l2_param_changes()
and i40e_notify_client_of_netdev_close()
Patch 3 - Refactors parameter of i40e_detect_recover_hung()
Patch 4 - Adds helper i40e_pf_get_main_vsi() to get main VSI and uses it
in existing code
Patch 5 - Consolidates checks whether given VSI is the main one
Patch 6 - Adds helper i40e_pf_get_main_veb() to get main VEB and uses it
in existing code
Patch 7 - Adds helper i40e_vsi_reconfig_tc() to reconfigure TC for
particular and uses it to replace existing open-coded pieces
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: Add and use helper to reconfigure TC for given VSI
i40e: Add helper to access main VEB
i40e: Consolidate checks whether given VSI is main
i40e: Add helper to access main VSI
i40e: Refactor argument of i40e_detect_recover_hung()
i40e: Refactor argument of several client notification functions
i40e: Remove flags field from i40e_veb
====================
Link: https://lore.kernel.org/r/20240430180639.1938515-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the same size kmalloc cache already exists, it should not be created
again. So there is the check for NULL kmalloc_caches before calling the
kmalloc creation function. However, new_kmalloc_cache() itself checks NULL
kmalloc_cahces before cache creation. Therefore, the NULL check is not
necessary in this function.
Signed-off-by: Hyunmin Lee <hyunminlr@gmail.com>
Co-developed-by: Jeungwoo Yoo <casionwoo@gmail.com>
Signed-off-by: Jeungwoo Yoo <casionwoo@gmail.com>
Co-developed-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Signed-off-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
For SLAB the kmalloc caches needed to be created in ascending sizes in
order. However, the constraint is not necessary anymore because SLAB has
been removed and SLUB doesn't need to comply with the constraint. Thus,
kmalloc 96 and 192 caches can be created after the other size kmalloc
caches are created instead of checking every time to find their order to
be created. Also, this change could prevent engineers from being confused
by the removed constraint.
Signed-off-by: Hyunmin Lee <hyunminlr@gmail.com>
Co-developed-by: Jeungwoo Yoo <casionwoo@gmail.com>
Signed-off-by: Jeungwoo Yoo <casionwoo@gmail.com>
Co-developed-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Signed-off-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
I sometimes see ("unknown type") in the result and it was because it
didn't check the type of stack variables properly during the instruction
tracking. The stack can carry constant values (without type info) and
if the target instruction is accessing the stack location, it resulted
in the "unknown type".
Maybe we could pick one of integer types for the constant, but it
doesn't really mean anything useful. Let's just drop the stack slot if
it doesn't have a valid type info.
Here's an example how it got the unknown type.
Note that 0xffffff48 = -0xb8.
-----------------------------------------------------------
find data type for 0xffffff48(reg6) at ...
CU for ...
frame base: cfa=0 fbreg=6
scope: [2/2] (die:11cb97f)
bb: [37 - 3a]
var [37] reg15 type='int' size=0x4 (die:0x1180633)
bb: [40 - 4b]
mov [40] imm=0x1 -> reg13
var [45] reg8 type='sigset_t*' size=0x8 (die:0x11a39ee)
mov [45] imm=0x1 -> reg2 <--- here reg2 has a constant
bb: [215 - 237]
mov [218] reg2 -> -0xb8(stack) constant <--- and save it to the stack
mov [225] reg13 -> -0xc4(stack) constant
call [22f] find_task_by_vgpid
call [22f] return -> reg0 type='struct task_struct*' size=0x8 (die:0x11881e8)
bb: [5c8 - 5cf]
bb: [2fb - 302]
mov [2fb] -0xc4(stack) -> reg13 constant
bb: [13b - 14d]
mov [143] 0xd50(reg3) -> reg5 type='struct task_struct*' size=0x8 (die:0xa31f3c)
bb: [153 - 153]
chk [153] reg6 offset=0xffffff48 ok=0 kind=0 fbreg <--- access here
found by insn track: 0xffffff48(reg6) type-offset=0
type='G<EF>^K<F6><AF>U' size=0 (die:0xffffffffffffffff)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The instruction tracking should be the same for the both registers.
Just do it once and compare the result with multi regs as with the
previous patches.
Then we don't need to call find_data_type_block() separately for each
reg.
Let's remove the 'reg' argument from the relevant functions.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following instruction pattern is used to access a global variable.
mov $0x231c0, %rax
movsql %edi, %rcx
mov -0x7dc94ae0(,%rcx,8), %rcx
cmpl $0x0, 0xa60(%rcx,%rax,1) <<<--- here
The first instruction set the address of the per-cpu variable (here, it
is 'runqueues' of type 'struct rq'). The second instruction seems like
a cpu number of the per-cpu base. The third instruction get the base
offset of per-cpu area for that cpu. The last instruction compares the
value of the per-cpu variable at the offset of 0xa60.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like per-cpu base offset array, sometimes it accesses the global
variable directly using the offset. Allow this type of instructions as
long as it finds a global variable for the address.
movslq %edi, %rcx
mov -0x7dc94ae0(,%rcx,8), %rcx <<<--- here
As %rcx has a valid type (i.e. array index) from the first instruction,
it will be checked by the first case in check_matching_type(). But as
it's not a pointer type, the match will fail. But in this case, it
should check if it accesses the kernel global array variable.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's currently no documentation for the swiotlb. Add documentation
describing usage scenarios, the key APIs, and implementation details.
Group the new documentation with other DMA-related documentation.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Petr Tesarik <petr@tesarici.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently it looks up global variables from the current CU using address
and name. But it sometimes fails to find a variable as the variable can
come from a different CU - but it's still strange it failed to find a
declaration for some reason.
Anyway, it can collect all global variables from all CU once and then
lookup them later on. This slightly improves the success rate of my
test data set.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function is to search all global variables in the CU. We want to
have the list of global variables at once and match them later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240502060011.1838090-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull NVMe fixes from Keith.
* git://git.infradead.org/nvme:
nvme-tcp: strict pdu pacing to avoid send stalls on TLS
nvmet: fix nvme status code when namespace is disabled
nvmet-tcp: fix possible memory leak when tearing down a controller
nvme: cancel pending I/O if nvme controller is in terminal state
nvmet-auth: replace pr_debug() with pr_err() to report an error.
nvmet-auth: return the error code to the nvmet_auth_host_hash() callers
nvme: find numa distance only if controller has valid numa id
nvme: fix warn output about shared namespaces without CONFIG_NVME_MULTIPATH
Generic Cleanups/Fixes:
- fixup of generated dtb imx219 overlay file names
- Remove UART baud rate selection in device tree.
- Use exact ranges for FSS.
SoC specific Fixes/Features:
AM625:
- Add USB PHY2 region and usb phy control registers
AM62A
- Add USB PHY2 region and usb phy control registers, Disable USB LPM.
- Add wave-512 video encoder/decoder support
- Enable UHS mode for SD
AM62P:
- Disable ethernet by default
- Add USB support
AM654
- Serdes fixups
- SDHCI fixups.
AM67/j722s:
- Disable ethernet by default
- Add USB support
AM68/J721s2:
- Add main ESM range
- Add support for SDR104
AM69/J784S4:
- Add main ESM range
- Enable support for UHS mode
Board specific fixes/Features:
AM625:
- BeaglePlay: Fixes for wlan mmc-pwrseq and ethernet phy reset
- phyboard-lyra: Add Audio codec, USB-C, increase CAN bit rate and enable
ability to apply overlays
- verdin: GPIO pinctrl fixups, Switch SD carddetect to GPIO, fixup memory
to 2GB, and audio clock, PCIe reset GPIO hog, sleep-moci
- lp-sk: Drop power button
- sk: minor white space cleanup.
AM64
- phyboard-electra: Increase CAN bit rate, enable overlay to enable GPIO fan
AM65:
- iot2050: Add icssg-prueth for PG1
AM67/j722s:
- evm: Enable UHS support for SD card and eMMC support.
AM69/J784s4:
- evm/sk: Fix uart pins and pinctrl macro usage.
-----BEGIN PGP SIGNATURE-----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=PUtH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OTpo
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.10
Generic Cleanups/Fixes:
- fixup of generated dtb imx219 overlay file names
- Remove UART baud rate selection in device tree.
- Use exact ranges for FSS.
SoC specific Fixes/Features:
AM625:
- Add USB PHY2 region and usb phy control registers
AM62A
- Add USB PHY2 region and usb phy control registers, Disable USB LPM.
- Add wave-512 video encoder/decoder support
- Enable UHS mode for SD
AM62P:
- Disable ethernet by default
- Add USB support
AM654
- Serdes fixups
- SDHCI fixups.
AM67/j722s:
- Disable ethernet by default
- Add USB support
AM68/J721s2:
- Add main ESM range
- Add support for SDR104
AM69/J784S4:
- Add main ESM range
- Enable support for UHS mode
Board specific fixes/Features:
AM625:
- BeaglePlay: Fixes for wlan mmc-pwrseq and ethernet phy reset
- phyboard-lyra: Add Audio codec, USB-C, increase CAN bit rate and enable
ability to apply overlays
- verdin: GPIO pinctrl fixups, Switch SD carddetect to GPIO, fixup memory
to 2GB, and audio clock, PCIe reset GPIO hog, sleep-moci
- lp-sk: Drop power button
- sk: minor white space cleanup.
AM64
- phyboard-electra: Increase CAN bit rate, enable overlay to enable GPIO fan
AM65:
- iot2050: Add icssg-prueth for PG1
AM67/j722s:
- evm: Enable UHS support for SD card and eMMC support.
AM69/J784s4:
- evm/sk: Fix uart pins and pinctrl macro usage.
* tag 'ti-k3-dt-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (48 commits)
arm64: dts: ti: Fix csi2-dual-imx219 dtb names
arm64: dts: ti: k3-am625-beagleplay: Fix Ethernet PHY RESET GPIOs
arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add USB-C
arm64: dts: ti: k3-j784s4: Add main esm address range
arm64: dts: ti: k3-j721s2: Add main esm address range
arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci
arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator
arm64: dts: ti: k3-j722s-evm: Enable UHS support for MMCSD
arm64: dts: ti: k3-j784s4-main: Enable support for UHS mode
arm64: dts: ti: k3-j721s2-main: Enable support for SDR104 speed mode
arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards
arm64: dts: ti: k3-am65-main: Remove unused properties in sdhci nodes
arm64: dts: ti: k3-am65-main: Fix sdhci node properties
arm64: dts: ti: Enable overlays for the am625-phyboard-lyra
arm64: dts: ti: am64-phyboard-electra: Add overlay to enable a GPIO fan
arm64: dts: ti: k3-am62a-main: Add Wave5 Video Encoder/Decoder Node
arm64: dts: ti: k3-am69-sk: Fix UART pin type and macro type
arm64: dts: ti: k3-j784s4-evm: Fix UART pin type and macro type
arm64: dts: ti: k3-am62a: Disable USB LPM
arm64: dts: ti: k3-am62p: add the USB sub-system
...
Link: https://lore.kernel.org/r/20240501124319.ake5j2oc5pbnn5nb@contour
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
