- Fix EEVDF corner cases
- Fix two nohz_full= related bugs that can cause boot crashes
and warnings.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Zhc/
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix EEVDF corner cases
- Fix two nohz_full= related bugs that can cause boot crashes
and warnings
* tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU
sched/isolation: Prevent boot crash when the boot CPU is nohz_full
sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf()
sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr
sched/eevdf: Always update V if se->on_rq when reweighting
- Make the CPU_MITIGATIONS=n interaction with conflicting
mitigation-enabling boot parameters a bit saner.
- Re-enable CPU mitigations by default on non-x86
- Fix TDX shared bit propagation on mprotect()
- Fix potential show_regs() system hang when PKE
initialization is not fully finished yet.
- Add the 0x10-0x1f model IDs to the Zen5 range
- Harden #VC instruction emulation some more
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=AfRR
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Make the CPU_MITIGATIONS=n interaction with conflicting
mitigation-enabling boot parameters a bit saner.
- Re-enable CPU mitigations by default on non-x86
- Fix TDX shared bit propagation on mprotect()
- Fix potential show_regs() system hang when PKE initialization
is not fully finished yet.
- Add the 0x10-0x1f model IDs to the Zen5 range
- Harden #VC instruction emulation some more
* tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Ignore "mitigations" kernel parameter if CPU_MITIGATIONS=n
cpu: Re-enable CPU mitigations by default for !X86 architectures
x86/tdx: Preserve shared bit on mprotect()
x86/cpu: Fix check for RDPKRU in __show_regs()
x86/CPU/AMD: Add models 0x10-0x1f to the Zen5 range
x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handler
Add support for the adm1281 Hot-Swap Controller and Digital Power
and Energy Monitor
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jose Ramon San Buenaventura <jose.sanbuenaventura@analog.com>
Link: https://lore.kernel.org/r/20240425070948.25788-2-jose.sanbuenaventura@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Intel Software Development manual defines the temperature digital
readout as the bits [22:16] of the IA32_[PACKAGE]_THERM_STATUS registers.
Bit 23 is specified as reserved.
In recent processors, however, the temperature digital readout uses bits
[23:16]. In those processors, using the bitmask 0x7f would lead to
incorrect readings if the temperature deviates from TjMax by more than
127 degrees Celsius.
Although not guaranteed, bit 23 is likely to be 0 in processors from a few
generations ago. The temperature reading would still be correct in those
processors when using a 0xff bitmask.
Model-specific provisions can be made for older processors in which bit 23
is not 0 should the need arise.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://lore.kernel.org/r/20240425171311.19519-4-ricardo.neri-calderon@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Last host driver supporting I2C_CLASS_SPD was i801. Now that I2C_CLASS_SPD
support has been removed there, we can remove it here too.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/3c4a1715-bfbb-4ae2-b35f-2f20f95e4932@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20240409085552.19868-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Commit 4e1008d8aae5 ("dt-bindings: hwmon: pmbus: adp1050: add bindings")
adds the ADP1050 HARDWARE MONITOR DRIVER section, but slips in a typo in
its file entry.
Fortunately, ./scripts/get_maintainer.pl --self-test=patterns complains
about this broken reference.
Fix the typo in ADP1050 HARDWARE MONITOR DRIVER maintainer entry.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20240402134203.8297-1-lukas.bulwahn@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Add mod_devicetable.h include.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240404191323.3547465-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This is a preparatory change to fulfill further conversion
the driver to be OF-independent. The independent code has
no analogue API that can read the value by index in the device
property array.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240404191323.3547465-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20240404124700.3807842-2-schnelle@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use preferred i2c_get_match_data() instead of of_device_get_match_data()
to get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240325120952.3019767-4-andriy.shevchenko@linux.intel.com
[groeck: Dropped __maybe_unused from mp2975_of_match]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Constify the local variables pointing to "struct pmbus_driver_info" and
other encoding params to annotate the function is not modifying pointed
data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240325120952.3019767-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The newly introduced SWAP() macro is quite generic by naming, but
moreover it's a repetition of the existing __assign_bit().
With this applied, add a missing bits.h (via now required bitops.h).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240325120952.3019767-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for ADP1050 Digital Controller for Isolated Power Supplies
with PMBus interface Voltage, Current and Temperature Monitor.
The ADP1050 implements several features to enable a robust
system of parallel and redundant operation for customers who
require high availability. The device can measure voltage,
current and temperature that can be used in different
techniques to identify and safely shut down an erroneous
power supply in parallel operation mode.
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Link: https://lore.kernel.org/r/20240321142201.10330-2-radu.sabau@analog.com
[groeck: Fixed corrupted link in documentation]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add dt-bindings for adp1050 digital controller for isolated power supply
with pmbus interface voltage, current and temperature monitor.
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240321142201.10330-1-radu.sabau@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This binding meets the requirements to be converted to dtschema
via trivial-devices.yaml.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240322-hwmon_dtschema-v3-5-6697de2a8228@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert existing binding to support validation.
This is a straightforward conversion with no new properties.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240322-hwmon_dtschema-v3-4-6697de2a8228@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert existing binding to support validation.
The binding has been renamed to match its compatible strings, with no
further additions.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240322-hwmon_dtschema-v3-2-6697de2a8228@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert existing binding to support validation.
This is a straightforward conversion with now new properties.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240322-hwmon_dtschema-v3-1-6697de2a8228@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert existing bindings to dtschema to support validation.
This is a straightforward conversion with no new properties.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240321-hwmon_yaml-v2-2-74fa8eb60ec9@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert existing bindings to dtschema to support validation.
This is a straightforward conversion with no new properties.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240320-hwmon_yaml-v1-1-a349ca21ccab@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The following error can be observed at boot:
[ 3.717920] ACPI Error: No handler for Region [SYSI] (00000000ab9e62c5) [IPMI] (20230628/evregion-130)
[ 3.717928] ACPI Error: Region IPMI (ID=7) has no handler (20230628/exfldio-261)
[ 3.717936] No Local Variables are initialized for Method [_GHL]
[ 3.717938] No Arguments are initialized for method [_GHL]
[ 3.717940] ACPI Error: Aborting method \_SB.PMI0._GHL due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
[ 3.717949] ACPI Error: Aborting method \_SB.PMI0._PMC due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
[ 3.717957] ACPI: \_SB_.PMI0: _PMC evaluation failed: AE_NOT_EXIST
On Dell systems several methods of acpi_power_meter access variables in
IPMI region [0], so wait until IPMI space handler is installed by
acpi_ipmi and also wait until SMI is selected to make the space handler
fully functional.
Since the dependency is inside BIOS's ASL code and it's not
discoverable, so use this fixup is a hack to workaround BIOS issue.
[0] https://www.dell.com/support/manuals/en-us/redhat-enterprise-linux-v8.0/rhel8_rn_pub/advanced-configuration-and-power-interface-acpi-error-messages-displayed-in-dmesg?guid=guid-0d5ae482-1977-42cf-b417-3ed5c3f5ee62
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20240320084317.366853-2-kai.heng.feng@canonical.com
[groeck: Simplified added code]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
On Dell servers, many APCI methods of acpi_power_meter module evaluate
variables inside IPMI region, so the region handler needs to be
installed. In addition to that, the handler needs to be fully
functional, and that depends on SMI being selected.
So add a helper to let acpi_power_meter know when the handler is
installed and ready to be used.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240320084317.366853-1-kai.heng.feng@canonical.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Update links in the documentation and in-code comments which point to
the datasheet.
The current links don't work because National Semiconductor (which is the
original manufacturer of this chip) has been a part of Texas Instruments
since 2011 and http://www.national.com/ doesn't work anymore.
Fixes: e1a8e913f9 ("[PATCH] lm70: New hardware monitoring driver")
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Link: https://lore.kernel.org/r/20240318154540.90613-3-five231003@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert adc128d818 bindings to dtschema to support validation.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240319-adc128d818_dtschema-v2-1-0824a6d69493@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The MP2971/MP2973 use a custom 16bit register format for
SMBALERT_MASK which doesn't follow the PMBUS specification.
Map the PMBUS defined bits used by the common code onto the custom
format used by MPS and since the SMBALERT_MASK is currently never read
by common code only implement the mapping for write transactions.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20240318174406.3782306-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When erofs_kill_sb() is called in block dev based mode, s_bdev may not
have been initialised yet, and if CONFIG_EROFS_FS_ONDEMAND is enabled,
it will be mistaken for fscache mode, and then attempt to free an anon_dev
that has never been allocated, triggering the following warning:
============================================
ida_free called for id=0 which is not allocated.
WARNING: CPU: 14 PID: 926 at lib/idr.c:525 ida_free+0x134/0x140
Modules linked in:
CPU: 14 PID: 926 Comm: mount Not tainted 6.9.0-rc3-dirty #630
RIP: 0010:ida_free+0x134/0x140
Call Trace:
<TASK>
erofs_kill_sb+0x81/0x90
deactivate_locked_super+0x35/0x80
get_tree_bdev+0x136/0x1e0
vfs_get_tree+0x2c/0xf0
do_new_mount+0x190/0x2f0
[...]
============================================
Now when erofs_kill_sb() is called, erofs_sb_info must have been
initialised, so use sbi->fsid to distinguish between the two modes.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240419123611.947084-3-libaokun1@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Instead of allocating the erofs_sb_info in fill_super() allocate it during
erofs_init_fs_context() and ensure that erofs can always have the info
available during erofs_kill_sb(). After this erofs_fs_context is no longer
needed, replace ctx with sbi, no functional changes.
Suggested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240419123611.947084-2-libaokun1@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
When prepare_ondemand_read failed, wrong error message is printed.
The prepare_read is also implemented in cachefiles, so we amend it.
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240424084247.759432-1-lihongbo22@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Third input argument to in_range() function requires the number of
values in range, not the last value in that range. Update macro for
persistence and adaptive threshold to reflect number of values
supported instead of the maximum values supported.
Fixes: 620d1e6c7a ("iio: light: Add support for APDS9306 Light Sensor")
Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/20240427090914.37274-1-subhajit.ghosh@tweaklogic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
... into snd_emu1010_load_firmware_entry(). This makes it clearer that
these steps belong together tightly, as implied by prior commits.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093717.3198716-5-oswald.buddenhagen@gmx.de>
It is a low-level I/O access function, so io.c is the natural place for
it.
While we're moving the code, reduce the scope of some variables, use
compound assignment operators, and add/adjust some comments.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093717.3198716-4-oswald.buddenhagen@gmx.de>
There is only one call site, and there we already know that we actually
have a firmware.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093717.3198716-3-oswald.buddenhagen@gmx.de>
Firstly, it is pointless to explicitly disable the power to the dock
prior to resetting the FPGA, as the latter will do the former anyway.
Secondly, it doesn't make much sense to check whether the FPGA is
already programmed. It's much simpler to just presume it is, and issue
the self-reset command. If it isn't, the effect isn't worse than the
checks themselves. As a side effect, we lose the info if the reset
fails, but there is no plausible way how that could happen unless the
card burns out while operating, and in that case we'll detect a firmware
upload failure a bit later anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093717.3198716-2-oswald.buddenhagen@gmx.de>
We did not delay after the second strobe signal, so another immediately
following access could potentially corrupt the written value.
This is a purely speculative fix with no supporting evidence, but after
taking out the spinlocks around the writes, it seems plausible that a
modern processor could be actually too fast. Also, it's just cleaner to
be consistent.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-7-oswald.buddenhagen@gmx.de>
A side effect of making the dock monitoring interrupt-driven was that
we'd be very quick to program a freshly connected dock. However, for
unclear reasons, the dock does not work when we do that - despite the
FPGA netlist upload going just fine. We work around this by adding a
delay before programming the dock; for safety, the value is several
times as much as was determined empirically.
Note that a badly timed dock hot-plug would have triggered the problem
even before the referenced commit - but now it would happen 100% instead
of about 3% of the time, thus making it impossible to work around by
re-plugging.
Fixes: fbb64eedf5 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-6-oswald.buddenhagen@gmx.de>
The FPGA access through the GPIO port does not interfere with other
sound processor register access, so there is no need to subject it to
emu_lock. And after moving all FPGA access out of the interrupt handler,
it does not need to be IRQ-safe, either.
What's more, attaching the dock causes a firmware upload, which takes
several seconds. We really don't want to disable IRQs for this long, and
even less also have someone else spin with IRQs disabled waiting for us.
Therefore, use a mutex for FPGA access locking.
This makes the code somewhat more noisy, as we need to wrap bigger
sections into the mutex, as it needs to enclose the spinlocks.
The latter has the "side effect" of fixing dock FPGA programming in a
corner case: a really badly timed mixer access right between entering
FPGA programming mode and uploading the netlist would mess up the
protocol.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-5-oswald.buddenhagen@gmx.de>
The actual event processing was already done by workqueue items. We can
move the event dispatching there as well, rather than doing it already
in the interrupt handler callback.
This change has a rather profound "side effect" on the reliability of
the FPGA programming: once we enter programming mode, we must not issue
any snd_emu1010_fpga_{read,write}() calls until we're done, as these
would badly mess up the programming protocol. But exactly that would
happen when trying to program the dock, as that triggers GPIO interrupts
as a side effect. This is mitigated by deferring the actual interrupt
handling, as workqueue items are not re-entrant.
To avoid scheduling the dispatcher on non-events, we now explicitly
ignore GPIO IRQs triggered by "uninteresting" pins, which happens a lot
as a side effect of calling snd_emu1010_fpga_{read,write}().
Fixes: fbb64eedf5 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-4-oswald.buddenhagen@gmx.de>
Pulled out of the next patch to improve its legibility.
As the function is now available, call it directly from
snd_emu10k1_emu1010_init(), thus making the MicroDock firmware loading
synchronous - there isn't really a reason not to. Note that this does
not affect the AudioDocks of rev1 cards, as these have no independent
power supplies, and thus come up only a while after the main card is
initialized.
As a drive-by, adjust the priorities of two messages to better reflect
their impact.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-3-oswald.buddenhagen@gmx.de>
While there are two separate IRQ status bits for dock attach and detach,
the hardware appears to mix them up more or less randomly, making them
useless for tracking what actually happened. It is much safer to check
the dock status separately and proceed based on that, as the old polling
code did.
Note that the code assumes that only the dock can be hot-plugged - if
other option card bits changed, the logic would break.
Fixes: fbb64eedf5 ("ALSA: emu10k1: make E-MU dock monitoring interrupt-driven")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218584
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-2-oswald.buddenhagen@gmx.de>
Some data for testing is immutable. In the case, the const qualifier is
available for any loader to place it to read-only segment.
Fixes: 3e39acf56e ("ALSA: core: Add sound core KUnit test")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240425233653.218434-1-o-takashi@sakamocchi.jp>
housekeeping_setup() checks cpumask_intersects(present, online) to ensure
that the kernel will have at least one housekeeping CPU after smp_init(),
but this doesn't work if the maxcpus= kernel parameter limits the number of
processors available after bootup.
For example, a kernel with "maxcpus=2 nohz_full=0-2" parameters crashes at
boot time on a virtual machine with 4 CPUs.
Change housekeeping_setup() to use cpumask_first_and() and check that the
returned CPU number is valid and less than setup_max_cpus.
Another corner case is "nohz_full=0" on a machine with a single CPU or with
the maxcpus=1 kernel argument. In this case non_housekeeping_mask is empty
and tick_nohz_full_setup() makes no sense. And indeed, the kernel hits the
WARN_ON(tick_nohz_full_running) in tick_sched_do_timer().
And how should the kernel interpret the "nohz_full=" parameter? It should
be silently ignored, but currently cpulist_parse() happily returns the
empty cpumask and this leads to the same problem.
Change housekeeping_setup() to check cpumask_empty(non_housekeeping_mask)
and do nothing in this case.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240413141746.GA10008@redhat.com
