This patch add two entries (pids.peak and pids.events) for pids
controller, and also update pids.current because it's on non-root.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently cgroup1_pidlist_destroy_all() will be called when releasing
cgroup even if the cgroup is on default hierarchy, however it doesn't
make any sense for v2 to destroy pidlist of v1.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit 4601b4b130 ("block: reopen the device in blkdev_reread_part")
lost the propagation of I/O errors from the low-level read of the
partition table to the user space caller of the BLKRRPART.
Apparently some user space relies on, so restore the propagation. This
isn't exactly pretty as other block device open calls explicitly do not
are about these errors, so add a new BLK_OPEN_STRICT_SCAN to opt into
the error propagation.
Fixes: 4601b4b130 ("block: reopen the device in blkdev_reread_part")
Reported-by: Saranya Muruganandam <saranyamohan@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240417144743.2277601-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix cpuid_deps[] to list the correct dependencies for GFNI, VAES, and
VPCLMULQDQ. These features don't depend on AVX512, and there exist CPUs
that support these features but not AVX512. GFNI actually doesn't even
depend on AVX.
This prevents GFNI from being unnecessarily disabled if AVX is disabled
to mitigate the GDS vulnerability.
This also prevents all three features from being unnecessarily disabled
if AVX512VL (or its dependency AVX512F) were to be disabled, but it
looks like there isn't any case where this happens anyway.
Fixes: c128dbfa0f ("x86/cpufeatures: Enable new SSE/AVX/AVX512 CPU features")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20240417060434.47101-1-ebiggers@kernel.org
Currently, when debug logs are enabled, messages such as the following
are found in the kernel log:
event mgmt rx skb pK-error len 209 ftype 00 stype 50
The "pK-error" comes from using %pK to display an skb address in an
interrupt context.
Per the guidance in the current "printk-formats" documentation, %pK
"is only intended when producing content of a file read by userspace
from e.g. procfs or sysfs, not for dmesg."
So replace %pK with %p in all of the ath12k_dbg() format strings.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240416-pk-v1-1-2c8852743e6d@quicinc.com
The survey dump statistics does not display channel RX and TX time
properly because the survey flag is not enabled in the firmware service
flag.
If firmware supports enable the service flag "bss_chan_info" in
wmi_resource_config to fetch and print the stats for specific pdev.
Enabling WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64 does not have any impact
on WCN7850 since this bit is not utilized by the WCN7850 firmware.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Thiraviyam Mariyappan <quic_tmariyap@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240410085329.3649572-1-quic_kathirve@quicinc.com
ath12k will support Multi-Link Operation (MLO) in the future but not yet. A
major change with MLO is that cfg80211 will disable Wireless Extension (WEXT)
user space interface. To avoid having inconsistent user experience, first
supporting WEXT and later not, disable WEXT already now.
Now ath12k claims that WEXT is not supported:
$ iwconfig wlan0
wlan0 no wireless extensions.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/20240411165645.4071238-1-kvalo@kernel.org
if (noa_descriptors > WMI_P2P_MAX_NOA_DESCRIPTORS), there is a mix of
return and goto. In such a case, 'td' should be freed to avoid a memory
leak.
While at it, change ath11k_wmi_p2p_noa_event() to return void.
'0' was returned in all cases, even in case of error and the only caller
does not handle the return value.
This is also more consistent with most of functions called from
ath11k_wmi_tlv_op_rx().
Fixes: 2408379f15 ("wifi: ath11k: implement handling of P2P NoA event")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/07f1fc75b2d5b4173ae1b7bb1da5be7f6fc608c8.1713212781.git.christophe.jaillet@wanadoo.fr
This is an existing optional property that ieee80211.yaml/cfg80211
provides. It's useful to further restrict supported frequencies
for a specified device through device-tree.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/fc606d2550d047a53b4289235dd3c0fe23d5daac.1686486468.git.chunkeey@gmail.com
If the firmware_signature changes then OSPM should not attempt to resume
from hibernate, but should instead perform a clean reboot. Set the global
swsusp_hardware_signature to allow the generic code to include the value
in the swsusp header on disk, and perform the appropriate check on resume.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20240412073530.2222496-3-dwmw2@infradead.org
Signed-off-by: Will Deacon <will@kernel.org>
ACPICA commit 44fc328a1a14b097d92b8be83989e4bf69b6e6cb
The FACS is optional even on hardware reduced platforms, and may exist
for the purpose of communicating the hardware_signature field to provoke
a clean reboot instead of a resume from hibernation.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20240412073530.2222496-2-dwmw2@infradead.org
Signed-off-by: Will Deacon <will@kernel.org>
Provide documentation that explains how to properly do CMODX in riscv.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240312-fencei-v13-3-4b6bdc2bbf32@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Support new prctl with key PR_RISCV_SET_ICACHE_FLUSH_CTX to enable
optimization of cross modifying code. This prctl enables userspace code
to use icache flushing instructions such as fence.i with the guarantee
that the icache will continue to be clean after thread migration.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240312-fencei-v13-2-4b6bdc2bbf32@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The memory barrier comments are added in
commit f6c99d8624 ("staging: vchiq_arm: Add missing memory barrier comments")
Drop the respective item from the TODO list.
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240412075743.60712-12-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch intended to drop the g_state pointer.
g_state is supposed to be a central place to track the state
via vchiq_state. This is now moved to be contained in the
struct vchiq_drv_mgmt. As a result vchiq_get_state() is also removed.
In order to have access to vchiq_drv_mgmt, vchiq_initialise()
and vchiq_mmal_init() are modified to receive a struct device pointer
as one of their function parameter
The vchiq_state pointer is now passed directly to
vchiq_dump_platform_instances() to get access to the state instead
getting it via vchiq_get_state().
For the char device, struct miscdevice is retrieved by struct file's
private data in vchiq_open and struct vchiq_drv_mgmt is retrieved
thereafter.
Removal of global variable members is now addressed hence, drop
the corresponding item from the TODO list.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240412075743.60712-11-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the service_callback static function to mmal_service_callback()
since the function signature conflicts with:
extern int
service_callback(struct vchiq_instance *vchiq_instance, enum vchiq_reason reason,
struct vchiq_header *header, unsigned int handle, void *bulk_userdata);
in vc04_services/interface/vchiq_arm/vchiq_arm.h
In a subsequent patch, we will include vchiq_arm.h header to
mmal-vchiq.c, which will then complain of this conflict. Hence,
this patch is meant to handle the conflict beforehand.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240412075743.60712-10-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The msg_queue_spinlock, quota_spinlock and bulk_waiter_spinlock
are allocated globally. Instead move them to struct vchiq_state
and initialise them in vchiq_init_state().
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240412075743.60712-9-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
g_regs stores the remapped memory pointer for the vchiq platform.
It can be moved to struct vchiq_drv_mgmt instead of being global.
Adjust the affected functions accordingly. Pass vchiq_state pointer
wherever necessary to access struct vchiq_drv_mgmt.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240412075743.60712-8-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variables tracking allocated pages fragments in vchiq_arm.c
can be easily moved to struct vchiq_drv_mgmt instead of being global.
This helps us to drop the non-essential global variables in the vchiq
interface.
No functional changes intended in this patch.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240412075743.60712-7-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vchiq_connected.[ch] just implements two function:
- vchiq_add_connected_callback()
- vchiq_call_connected_callbacks()
for the deferred vchiq callbacks. Those can easily live in
vchiq_arm.[ch], hence move them. This allows making the
vchiq_call_connected_callbacks() function static.
The move doesn't copy over MAX_CALLBACKS because it is the same as
VCHIQ_DRV_MAX_CALLBACKS. Hence, it now being used in
vchiq_add_connected_callback().
No functional changes intended in this patch.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240412075743.60712-6-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Connections to the vchiq driver are tracked using global variables.
Drop those and introduce them as members of struct vchiq_drv_mgmt.
Hence, struct vchiq_drv_mgmt will be used to track the connections.
Also, store a vchiq_drv_mgmt pointer to struct vchiq_device to
have easy access to struct vchiq_drv_mgmt across vchiq devices.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240412075743.60712-5-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cache-line-size is cached in struct vchiq_platform_info.
There is no need to cache this again via g_cache_line_size
and use it. Instead use the value from vchiq_platform_info directly.
While at it, move the comment about L2 cache line size in the kerneldoc
block of struct vchiq_platform_info.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240412075743.60712-4-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vchiq_drvdata combines two types of book-keeping data. There is
platform-specific static data (for e.g. cache lines size) and then
data needed for book-keeping at runtime.
Split the data into two structures: struct vchiq_platform_info and
struct vchiq_drv_mgmt. The vchiq_drv_mgmt is allocated at runtime
during probe and will be extended in subsequent patches to remove
all global variables allocated.
No functional changes intended in this patch.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240412075743.60712-3-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
g_once_init is not used in a meaningful way anywhere. Drop it
along with connected_init() which sets it.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240412075743.60712-2-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checkpatch complains that:
CHECK: Lines should not end with a '('
+typedef void (*vchiq_mmal_buffer_cb)(
Re-align the function parameters to make checkpatch happy.
Signed-off-by: Sumadhura Kalyan <opensourcecond@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240415171138.5849-1-opensourcecond@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no longer any need to clear genpd->suspended_count in
genpd_prepare(), as it should be correctly incremented and decremented for
all cases. In fact, if the counter isn't correctly managed we would be
hiding a problem that we shouldn't. Therefore, let's not clear it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240412104208.74361-2-ulf.hansson@linaro.org
During system suspend we may try to enter a low power-state for the genpd
in question. Let's take this into account for the statistics too, by
updating the rejected/usage counters for the corresponding state.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240412104208.74361-1-ulf.hansson@linaro.org
The lines in the VCHIQ Kconfig help texts are too long, which makes
it hard to read the menuconfig. So reformat them to restore the
readability.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240414192257.6011-1-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
R-Car M3-W needs a delay of 1 µs before powering off the A3IR and A3VC
power domains. Add support for this using a new flag, which indicates
that a power area is subject to this quirk.
Inspired by a patch in the BSP by Dien Pham.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/ecbc3465c598084c904dd3714e2894463094ed9a.1713348705.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently R-Car M3-W and M3-W+ are handled by a single sub-driver,
but using separate Kconfig symbols and separate rcar_sysc_info
structures, and fixup code to handle the remaining differences.
Prepare for handling more differences by splitting them in two separate
sub-drivers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/a416e2bae7227c08d7e7d158366ab021f4d6cc18.1713348705.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Until commit 7e8a50df26 ("soc: renesas: rcar-sysc: Drop legacy
handling") in v4.19, the rcar_sysc_ch structure was part of the API for
legacy board code not yet using DT. Since then, there is no longer a
reason to keep it as a separate structure.
Moreover, a future quirk handling will need access to the rcar_sysc_pd
structure's flags member in rcar_sysc_pwr_on_off(). Hence absorb the
rcar_sysc_ch structure into the rcar_sysc_pd structure, and pass around
the latter instead of the former.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/672805a8c52ce63200e342212bbe6f84a445397b.1713348705.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
care about when the functions are actually used.
Also make use of pm_sleep_ptr() to discard all PM_SLEEP related
stuff if CONFIG_PM_SLEEP isn't enabled.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240412142317.5191-6-linux.amoon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
care about when the functions are actually used.
Also make use of pm_ptr() to discard all PM related stuff if CONFIG_PM
isn't enabled.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20240412142317.5191-5-linux.amoon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20240412142317.5191-4-linux.amoon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro has the advantage over SIMPLE_DEV_PM_OPS that we don't have to
care about when the functions are actually used.
Also make use of pm_ptr() to discard all PM related stuff if CONFIG_PM
isn't enabled.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20240412142317.5191-3-linux.amoon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20240412142317.5191-2-linux.amoon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TBU support is now available, so let's allow it to be used on other
platforms that have the Qualcomm SMMU-500 implementation with TBUs. This
will allow the context fault handler to query the TBUs when a context
fault occurs.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-7-quic_c_gdjako@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
The sdm845 platform now supports TBUs, so let's get additional debug
info from the TBUs when a context fault occurs. Implement a custom
context fault handler that does both software + hardware page table
walks and TLB Invalidate All.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-5-quic_c_gdjako@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Threaded IRQ handlers run in a less critical context compared to normal
IRQs, so they can perform more complex and time-consuming operations
without causing significant delays in other parts of the kernel.
During a context fault, it might be needed to do more processing and
gather debug information from TBUs in the handler. These operations may
sleep, so add an option to use a threaded IRQ handler in these cases.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-4-quic_c_gdjako@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Operating the TBUs (Translation Buffer Units) from Linux on Qualcomm
platforms can help with debugging context faults. To help with that,
the TBUs can run ATOS (Address Translation Operations) to manually
trigger address translation of IOVA to physical address in hardware
and provide more details when a context fault happens.
The driver will control the resources needed by the TBU to allow
running the debug operations such as ATOS, check for outstanding
transactions, do snapshot capture etc.
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-3-quic_c_gdjako@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
The "apps_smmu" on the Qualcomm sdm845 platform is an implementation
of the SMMU-500, that consists of a single TCU (Translation Control
Unit) and multiple TBUs (Translation Buffer Units). These TBUs have
hardware debugging features that are specific and only present on
Qualcomm hardware. Represent them as independent DT nodes. List all
the resources that are needed to operate them (such as registers,
clocks, power domains and interconnects).
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/20240417133731.2055383-2-quic_c_gdjako@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
The renesas_usbhs_get_info() wrapper was useful for legacy board code.
Since commit 1fa59bda21 ("ARM: shmobile: Remove legacy board code
for Armadillo-800 EVA") in v4.3, it is no longer used outside the USBHS
driver, and provides no added value over dev_get_platdata(), while
obfuscating the real operation.
Drop it, and replace it by dev_get_platdata() in its sole user.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/fa296af4452dfe394a58b75fd44c3bb9591936eb.1713282736.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dwc->maximum_speed is determined through the device capability and
designer's constraint through device tree binding. If none of them
applies, don't let the default coreConsultant setting in GUCTL1 to limit
the device operating speed.
Normally the default setting will not contradict the device capability
or device tree binding. This scenario was found through our internal
tests, not an actual bug in the wild.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/65003b0cc37c08a0d22996009f548247ad18c00c.1713308949.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the PMIC-GLINK device has orientation GPIOs declared, then it will
report connection orientation. In this case set the flag to mark
registered ports as orientation-aware.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240411-ucsi-orient-aware-v2-5-d4b1cb22a33f@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a callback to allow glue drivers to update the connector before
registering corresponding power supply and Type-C port. In particular
this is useful if glue drivers want to touch the connector's Type-C
capabilities structure.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240411-ucsi-orient-aware-v2-4-d4b1cb22a33f@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use typec_set_orientation() instead of calling typec_switch_set()
manually. This way the rest of the typec framework and the userspace are
notified about the orientation change.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240411-ucsi-orient-aware-v2-3-d4b1cb22a33f@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>