Commit graph

1,296,507 commits

Author SHA1 Message Date
Sweet Tea Dorminy
131a821a24 btrfs: fallback if compressed IO fails for ENOSPC
In commit b4ccace878 ("btrfs: refactor submit_compressed_extents()"), if
an async extent compressed but failed to find enough space, we changed
from falling back to an uncompressed write to just failing the write
altogether. The principle was that if there's not enough space to write
the compressed version of the data, there can't possibly be enough space
to write the larger, uncompressed version of the data.

However, this isn't necessarily true: due to fragmentation, there could
be enough discontiguous free blocks to write the uncompressed version,
but not enough contiguous free blocks to write the smaller but
unsplittable compressed version.

This has occurred to an internal workload which relied on write()'s
return value indicating there was space. While rare, it has happened a
few times.

Thus, in order to prevent early ENOSPC, re-add a fallback to
uncompressed writing.

Fixes: b4ccace878 ("btrfs: refactor submit_compressed_extents()")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Co-developed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2024-04-18 01:46:52 +02:00
Naohiro Aota
7192833c4e btrfs: scrub: run relocation repair when/only needed
When btrfs scrub finds an error, it reads mirrors to find correct data. If
all the errors are fixed, sctx->error_bitmap is cleared for the stripe
range. However, in the zoned mode, it runs relocation to repair scrub
errors when the bitmap is *not* empty, which is a flipped condition.

Also, it runs the relocation even if the scrub is read-only. This was
missed by a fix in commit 1f2030ff6e ("btrfs: scrub: respect the
read-only flag during repair").

The repair is only necessary when there is a repaired sector and should be
done on read-write scrub. So, tweak the condition for both regular and
zoned case.

Fixes: 54765392a1 ("btrfs: scrub: introduce helper to queue a stripe for scrub")
Fixes: 1f2030ff6e ("btrfs: scrub: respect the read-only flag during repair")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2024-04-18 01:46:47 +02:00
David Sterba
e5a78fdec0 btrfs: remove colon from messages with state
The message format in syslog is usually made of two parts:

  prefix ":" message

Various tools parse the prefix up to the first ":". When there's
an additional status of a btrfs filesystem like

  [5.199782] BTRFS info (device nvme1n1p1: state M): use zstd compression, level 9

where 'M' is for remount, there's one more ":" that does not conform to
the format. Remove it.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2024-04-18 01:46:35 +02:00
Fenglin Wu
9e0631695e input: pm8xxx-vibrator: add new SPMI vibrator support
Add support for a new SPMI vibrator module which is very similar
to the vibrator module inside PM8916 but has a finer drive voltage
step and different output voltage range, its drive level control
is expanded across 2 registers. The vibrator module can be found
in following Qualcomm PMICs: PMI632, PM7250B, PM7325B, PM7550BA.

Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240416-pm8xxx-vibrator-new-design-v11-3-7b1c951e1515@quicinc.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-04-17 15:27:12 -07:00
Fenglin Wu
ca7755adf0 dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module
Add compatible strings to support vibrator module inside PMI632,
PMI7250B, PM7325B, PM7550BA.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/20240416-pm8xxx-vibrator-new-design-v11-2-7b1c951e1515@quicinc.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-04-17 15:27:12 -07:00
Fenglin Wu
6d84ec254a input: pm8xxx-vibrator: refactor to support new SPMI vibrator
Currently, vibrator control register addresses are hard coded,
including the base address and offsets, it's not flexible to
support new SPMI vibrator module which is usually included in
different PMICs with different base address. Refactor it by using
the base address defined in devicetree.

Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240416-pm8xxx-vibrator-new-design-v11-1-7b1c951e1515@quicinc.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-04-17 15:27:12 -07:00
Vinay Belgaumkar
2817a1f1bf drm/xe/lnl: Apply GuC Wa_13011645652
Enable WA for a bug that could cause the C6 state machine to hang
during RC6 exit.

v2: Add comment clarifying the WA (John H)
v3: Add more details to the comment (John H)

Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417054802.1766359-1-vinay.belgaumkar@intel.com
2024-04-17 15:21:12 -07:00
Kent Overstreet
0389c09b2f bcachefs: Fix bio alloc in check_extent_checksum()
if the buffer is virtually mapped it won't be a single bvec

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-17 17:29:58 -04:00
Kent Overstreet
719aec84b1 bcachefs: fix leak in bch2_gc_write_reflink_key
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-17 17:29:58 -04:00
Kent Overstreet
605109ff5e bcachefs: KEY_TYPE_error is allowed for reflink
KEY_TYPE_error is left behind when we have to delete all pointers in an
extent in fsck; it allows errors to be correctly returned by reads
later.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-17 17:29:58 -04:00
Kent Overstreet
fa845c7349 bcachefs: Fix bch2_dev_btree_bitmap_marked_sectors() shift
Fixes: 27c15ed297 bcachefs: bch_member.btree_allocated_bitmap
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-17 17:29:53 -04:00
Rob Herring
93b36e1d37 arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
The correct compatible string for a USB interface node begins with
"usbif", not "usb". Fix the Rockchip RK3399 based Kobol Helios64 board.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240412204405.3703638-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-04-17 23:14:44 +02:00
Andy Shevchenko
69ffed4b62 gpiolib: swnode: Remove wrong header inclusion
The flags in the software node properties are supposed to be
the GPIO lookup flags, which are provided by gpio/machine.h,
as the software nodes are the kernel internal thing and doesn't
need to rely to any of ABIs.

Fixes: e7f9ff5dc9 ("gpiolib: add support for software nodes")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-04-17 22:48:14 +02:00
Andy Shevchenko
8a7a610325 gpiolib: Get rid of never false gpio_is_valid() calls
In the cases when gpio_is_valid() is called with unsigned parameter
the result is always true in the GPIO library code, hence the check
for false won't ever be true. Get rid of such calls.

While at it, move GPIO device base to be unsigned to clearly show
it won't ever be negative. This requires a new definition for the
maximum GPIO number in the system.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-04-17 22:46:44 +02:00
Masami Hiramatsu (Google)
298b871cd5 bootconfig: Fix the kerneldoc of _xbc_exit()
Fix the kerneldoc of _xbc_exit() which is updated to have an @early
argument and the function name is changed.

Link: https://lore.kernel.org/all/171321744474.599864.13532445969528690358.stgit@devnote2/

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404150036.kPJ3HEFA-lkp@intel.com/
Fixes: 89f9a1e876 ("bootconfig: use memblock_free_late to free xbc memory to buddy")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-04-18 05:01:32 +09:00
Uwe Kleine-König
999dff3c13 ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Message-Id: <16144ffaa6f40a1a126d5cf19ef4337218a04fbb.1709655755.git.u.kleine-koenig@pengutronix.de>
Signed-off-by: Corey Minyard <minyard@acm.org>
2024-04-17 14:55:04 -05:00
Uwe Kleine-König
c61090f4ef ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Message-Id: <d125e83788ddc27fc52a3f11b2c329b40cbdd6f9.1709655755.git.u.kleine-koenig@pengutronix.de>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Corey Minyard <minyard@acm.org>
2024-04-17 14:55:04 -05:00
Uwe Kleine-König
a69da50299 ipmi: ipmi_ssif: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Message-Id: <c8a6cd95ad7a8220e211373c44cdaba2a8c06052.1709655755.git.u.kleine-koenig@pengutronix.de>
Signed-off-by: Corey Minyard <minyard@acm.org>
2024-04-17 14:55:04 -05:00
Uwe Kleine-König
f99a996574 ipmi: ipmi_si_platform: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Message-Id: <789cd7876780241430dd5604bc4322453fe4e581.1709655755.git.u.kleine-koenig@pengutronix.de>
Signed-off-by: Corey Minyard <minyard@acm.org>
2024-04-17 14:55:04 -05:00
Uwe Kleine-König
26edd74f5d ipmi: ipmi_powernv: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Message-Id: <22375be2dd616d8ccc2959586a08e49a5ad9e47b.1709655755.git.u.kleine-koenig@pengutronix.de>
Signed-off-by: Corey Minyard <minyard@acm.org>
2024-04-17 14:55:04 -05:00
Uwe Kleine-König
2348918407 ipmi: bt-bmc: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Message-Id: <dc5e67fb45c8c673cbf3cdbc4997c5deb3a700fe.1709655755.git.u.kleine-koenig@pengutronix.de>
Signed-off-by: Corey Minyard <minyard@acm.org>
2024-04-17 14:55:04 -05:00
Niklas Schnelle
c5c76d800a char: ipmi: handle HAS_IOPORT dependencies
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add this dependency and ifdef sections of
code using inb()/outb() as alternative access methods.

Acked-by: Corey Minyard <cminyard@mvista.com>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Message-Id: <20240404104506.3352637-2-schnelle@linux.ibm.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
2024-04-17 14:55:04 -05:00
Allen Pais
a9b5bb5c22 ipmi: Convert from tasklet to BH workqueue
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.

This patch converts drivers/char/ipmi/* from tasklet to BH workqueue.

Based on the work done by Tejun Heo <tj@kernel.org>
Branch: https://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git for-6.10

Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Message-Id: <20240327160314.9982-7-apais@linux.microsoft.com>
[Removed a duplicate include of workqueue.h]
Signed-off-by: Corey Minyard <minyard@acm.org>
2024-04-17 14:54:45 -05:00
Javier Carrasco
1c431b92e2 dt-bindings: rtc: convert trivial devices into dtschema
These RTCs meet the requirements for a direct conversion into
trivial-rtc:

- google,goldfish-rtc
- maxim,ds1742
- lpc32xx-rtc
- orion-rtc
- rtc-aspeed
- spear-rtc
- via,vt8500-rtc

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240413-rtc_dtschema-v3-2-eff368bcc471@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-04-17 21:34:34 +02:00
Javier Carrasco
c3a0ee85f6 dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema
Convert existing binding to dtschema to support validation and
add the undocumented compatible 'fsl,imx23-rtc'.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240413-rtc_dtschema-v3-4-eff368bcc471@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-04-17 21:29:31 +02:00
Javier Carrasco
bbd3e43662 dt-bindings: rtc: pxa-rtc: convert to dtschema
Convert existing binding to dtschema to support validation.

The missing 'reg' and 'interrupts' properties have been added, taking
the 2 supported interrupts into account to fix the example.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240413-rtc_dtschema-v3-3-eff368bcc471@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-04-17 21:29:31 +02:00
Alexander Aring
7b012732d0 dlm: fix sleep in atomic context
This patch changes the orphans mutex to a spinlock since commit
c288745f1d ("dlm: avoid blocking receive at the end of recovery") is
using a rwlock_t to lock the DLM message receive path and do_purge() can
be called while this lock is held that forbids to sleep.

We need to use spin_lock_bh() because also a user context that calls
dlm_user_purge() can call do_purge() and since commit 92d59adfaf
("dlm: do message processing in softirq context") the DLM message
receive path is done under softirq context.

Fixes: c288745f1d ("dlm: avoid blocking receive at the end of recovery")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/gfs2/9ad928eb-2ece-4ad9-a79c-d2bce228e4bc@moroto.mountain/
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
2024-04-17 14:20:04 -05:00
Erick Archer
98f2233a5c dmaengine: pl08x: Use kcalloc() instead of kzalloc()
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1].

Here the multiplication is obviously safe because the "channels"
member can only be 8 or 2. This value is set when the "vendor_data"
structs are initialized.

static struct vendor_data vendor_pl080 = {
	[...]
	.channels = 8,
	[...]
};

static struct vendor_data vendor_nomadik = {
	[...]
	.channels = 8,
	[...]
};

static struct vendor_data vendor_pl080s = {
	[...]
	.channels = 8,
	[...]
};

static struct vendor_data vendor_pl081 = {
	[...]
	.channels = 2,
	[...]
};

However, using kcalloc() is more appropriate [1] and improves
readability. This patch has no effect on runtime behavior.

Link: https://github.com/KSPP/linux/issues/162 [1]
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Link: https://lore.kernel.org/r/AS8PR02MB72373D9261B3B166048A8E218B392@AS8PR02MB7237.eurprd02.prod.outlook.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-17 22:43:17 +05:30
Frank Li
bd2f66bc0b dmaengine: fsl-dpaa2-qdma: Update DPDMAI interfaces to version 3
Update the DPDMAI interfaces to support MC firmware up to 10.1x.x, which
major change is to add dpaa domain id support. User space MC controller
tool can create difference dpaa domain for difference virtual environment.
DMA queues can map to difference service priorities.

The MC command was basic compatible original one. The new command use
previous reserved field.

- Add queue number for dpdmai_get_tx(rx)_queue().
- Unified rx(tx)_queue_attr.
- Update pad/reserved field of struct dpdmai_rsp_get_attributes and
struct dpdmai_cmd_queue for new API.
- Update command DPDMAI_SET(GET)_RX_QUEUE and DPDMAI_CMDID_GET_TX_QUEUE

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240409163630.1996052-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-17 22:42:38 +05:30
Frank Li
b52e28eca7 dmaengine: fsl-edma: fix miss mutex unlock at an error return path
Use cleanup to manage mutex. Let compiler to do scope guard automatically.

Fixes: 6aa60f79e6 ("dmaengine: fsl-edma: add safety check for 'srcid'")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202404110915.riwV3ZAC-lkp@intel.com/
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240411203935.3137158-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-17 22:39:52 +05:30
Linus Torvalds
4b6b513221 pwm: Another batch of fixes targeting v6.9-rc5
The first patch fixes a regression in the suspend/resume path for the
 dwc pwm driver that was introduced in v6.9-rc1 when support for 16
 channel devices was added.
 
 The second patch fixes a bunch of device tree binding check warnings.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmYf8VgACgkQj4D7WH0S
 /k6rmQf+L1PaAyvg/RTdZFF77pHQlMerNRmyiOuhUaCeqlaWOcQ0P+oyx9bn7NBa
 NncMyAvf2NtyJRwYGZAY67f3ann2sT1VOTNAJmyY9i3zY+2YyYrPmuWtD83CeNuo
 g2V/rTo1ynTQ2KZZ3FO/t2zgYoIyQpENxvuwxlVyYoO/OMtFeqUKEshZEwIJXopH
 pjC+Pv/5ikwSjAumB53XixSnd+wIG4bAVXL842vxb6gfKPh+hmSjm3MRBdys0Z2i
 w38p/x5ClO3dpcU+qCW+1itglbL0K9GnBGwMjHE2GAyDE3fqqLvH9rZeXdJ8jRC3
 tiKla3yEZj1BS66ziUZ9wgScRW40OQ==
 =BuGl
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-6.9-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux

Pull pwm fixes from Uwe Kleine-König:
 "The first patch fixes a regression in the suspend/resume path for the
  dwc pwm driver that was introduced in v6.9-rc1 when support for 16
  channel devices was added.

  The second patch fixes a bunch of device tree binding check warnings"

* tag 'pwm/for-6.9-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
  dt-bindings: pwm: mediatek,pwm-disp: Document power-domains property
  pwm: dwc: allow suspend/resume for 16 channels
2024-04-17 10:04:40 -07:00
Marek Vasut
f7ad2ce5fd drm/panel: simple: Add Innolux G121XCE-L01 LVDS display support
G121XCE-L01 is a Color Active Matrix Liquid Crystal Display composed of
a TFT LCD panel, a driver circuit, and LED backlight system. The screen
format is intended to support the 4:3, 1024(H) x 768(V) screen and either
262k/16.7M colors (RGB 6-bits or 8-bits) with LED backlight driver circuit.
All input signals are LVDS interface compatible.

Documentation [1] and [2] indicate that G121X1-L03 and G121XCE-L01 are
effectively identical panels, use the former as RGB 6-bits variant and
add the later as RGB 8-bits variant.

[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf
[2] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121XCE-L01_Datasheet.pdf

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-4-marex@denx.de
2024-04-17 18:58:37 +02:00
Marek Vasut
90c53f2bb9 drm/panel: simple: Convert Innolux G121X1-L03 to display_timing
Use display_timing instead of drm_display_mode to define a range of
possible display timings supported by this panel. This makes the panel
support more flexible and improves compatibility. No functional change
is expected.

The settings are picked from documentation [1] section 6.1 INPUT SIGNAL
TIMING SPECIFICATIONS.

[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-3-marex@denx.de
2024-04-17 18:58:36 +02:00
Marek Vasut
11ac72d033 drm/panel: simple: Add missing Innolux G121X1-L03 format, flags, connector
The .bpc = 6 implies .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ,
add the missing bus_format. Add missing connector type and bus_flags
as well.

Documentation [1] 1.4 GENERAL SPECIFICATI0NS indicates this panel is
capable of both RGB 18bit/24bit panel, the current configuration uses
18bit mode, .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , .bpc = 6.

Support for the 24bit mode would require another entry in panel-simple
with .bus_format = MEDIA_BUS_FMT_RGB666_1X7X4_SPWG and .bpc = 8, which
is out of scope of this fix.

[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf

Fixes: f8fa17ba81 ("drm/panel: simple: Add support for Innolux G121X1-L03")
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-2-marex@denx.de
2024-04-17 18:58:35 +02:00
Marek Vasut
7859c1f420 dt-bindings: display: simple: Document support for Innolux G121XCE-L01
Document support for Innolux CheMei 12" G121XCE-L01 XGA LVDS display.

G121XCE-L01 is a Color Active Matrix Liquid Crystal Display composed of
a TFT LCD panel, a driver circuit, and LED backlight system. The screen
format is intended to support the 4:3, 1024(H) x 768(V) screen and either
262k/16.7M colors (RGB 6-bits or 8-bits) with LED backlight driver circuit.
All input signals are LVDS interface compatible.

Documentation [1] and [2] indicate that G121X1-L03 and G121XCE-L01 are
effectively identical panels, use the former as RGB 6-bits variant and
document the later as RGB 8-bits variant.

[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf
[2] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121XCE-L01_Datasheet.pdf

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328102746.17868-1-marex@denx.de
2024-04-17 18:58:34 +02:00
Dariusz Aftanski
41355365d2 ice: Remove ndo_get_phys_port_name
ndo_get_phys_port_name is never actually used, as in switchdev
devlink is always being created.

Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Dariusz Aftanski <dariusz.aftanski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-17 09:40:33 -07:00
Borislav Petkov (AMD)
6376306add x86/retpolines: Enable the default thunk warning only on relevant configs
The using-default-thunk warning check makes sense only with
configurations which actually enable the special return thunks.

Otherwise, it fires on unrelated 32-bit configs on which the special
return thunks won't even work (they're 64-bit only) and, what is more,
those configs even go off into the weeds when booting in the
alternatives patching code, leading to a dead machine.

Fixes: 4461438a84 ("x86/retpoline: Ensure default return thunk isn't used at runtime")
Reported-by: Klara Modin <klarasmodin@gmail.com>
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Link: https://lore.kernel.org/r/78e0d19c-b77a-4169-a80f-2eef91f4a1d6@gmail.com
Link: https://lore.kernel.org/r/20240413024956.488d474e@yea
2024-04-17 18:02:05 +02:00
Marcin Szycik
cc2a9d6c03 ice: Add automatic VF reset on Tx MDD events
In cases when VF sends malformed packets that are classified as malicious,
it can cause Tx queue to freeze as a result of Malicious Driver Detection
event. Such malformed packets can appear as a result of a faulty userspace
app running on VF. This frozen queue can be stuck for several minutes being
unusable.

User might prefer to immediately bring the VF back to operational state
after such event, which can be done by automatically resetting the VF which
caused MDD. This is already implemented for Rx events (mdd-auto-reset-vf
flag private flag needs to be set).

Extend the VF auto reset to also cover Tx MDD events. When any MDD event
occurs on VF (Tx or Rx) and the mdd-auto-reset-vf private flag is set,
perform a graceful VF reset to quickly bring it back to operational state.

Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Liang-Min Wang <liang-min.wang@intel.com>
Signed-off-by: Liang-Min Wang <liang-min.wang@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-17 08:57:21 -07:00
Alex Deucher
781d41fed1 drm/radeon: silence UBSAN warning (v3)
Convert a variable sized array from [1] to [].

v2: fix up a few more.
v3: integrate comments from Kees.

Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Jeff Johnson <quic_jjohnson@quicinc.com> (v2)
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: keescook@chromium.org
2024-04-17 11:50:43 -04:00
Alex Deucher
0ba753bc7e drm/radeon: make -fstrict-flex-arrays=3 happy
The driver parses a union where the layout up through the first
array is the same, however, the array has different sizes
depending on the elements in the union.  Be explicit to
fix the UBSAN checker.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3323
Fixes: df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kees Cook <keescook@chromium.org>
2024-04-17 11:50:43 -04:00
Christian König
a6ff969fe9 drm/amdgpu: fix visible VRAM handling during faults
When we removed the hacky start code check we actually didn't took into
account that *all* VRAM pages needs to be CPU accessible.

Clean up the code and unify the handling into a single helper which
checks if the whole resource is CPU accessible.

The only place where a partial check would make sense is during
eviction, but that is neglitible.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: aed01a6804 ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
2024-04-17 11:50:43 -04:00
xinhui pan
6fef2d4c00 drm/amdgpu: validate the parameters of bo mapping operations more clearly
Verify the parameters of
amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place.

Fixes: dc54d3d174 ("drm/amdgpu: implement AMDGPU_VA_OP_CLEAR v2")
Cc: stable@vger.kernel.org
Reported-by: Vlad Stolyarov <hexed@google.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-17 11:50:43 -04:00
Paolo Bonzini
44ecfa3e5f Merge branch 'svm' of https://github.com/kvm-x86/linux into HEAD
Clean up SVM's enter/exit assembly code so that it can be compiled
without OBJECT_FILES_NON_STANDARD.  The "standard" __svm_vcpu_run() can't
be made 100% bulletproof, as RBP isn't restored on #VMEXIT, but that's
also the case for __vmx_vcpu_run(), and getting "close enough" is better
than not even trying.

As for SEV-ES, after yet another refresher on swap types, I realized
KVM can simply let the hardware restore registers after #VMEXIT, all
that's missing is storing the current values to the host save area
(they are swap type B).  This should provide 100% accuracy when using
stack frames for unwinding, and requires less assembly.

In between, build the SEV-ES code iff CONFIG_KVM_AMD_SEV=y, and yank out
"support" for 32-bit kernels in __svm_sev_es_vcpu_run, which was
unnecessarily polluting the code for a configuration that is disabled
at build time.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-17 11:44:37 -04:00
Heiner Kallweit
e30556bf68 PCI: Constify pcibus_class
Constify pcibus_class. All users take a const struct class * argument.

Link: https://lore.kernel.org/r/5e01f46f-266f-4fb3-be8a-8cb9e566cd75@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-04-17 10:44:17 -05:00
Pablo Neira Ayuso
e79b47a861 netfilter: nf_tables: restore set elements when delete set fails
From abort path, nft_mapelem_activate() needs to restore refcounters to
the original state. Currently, it uses the set->ops->walk() to iterate
over these set elements. The existing set iterator skips inactive
elements in the next generation, this does not work from the abort path
to restore the original state since it has to skip active elements
instead (not inactive ones).

This patch moves the check for inactive elements to the set iterator
callback, then it reverses the logic for the .activate case which
needs to skip active elements.

Toggle next generation bit for elements when delete set command is
invoked and call nft_clear() from .activate (abort) path to restore the
next generation bit.

The splat below shows an object in mappings memleak:

[43929.457523] ------------[ cut here ]------------
[43929.457532] WARNING: CPU: 0 PID: 1139 at include/net/netfilter/nf_tables.h:1237 nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[...]
[43929.458014] RIP: 0010:nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458076] Code: 83 f8 01 77 ab 49 8d 7c 24 08 e8 37 5e d0 de 49 8b 6c 24 08 48 8d 7d 50 e8 e9 5c d0 de 8b 45 50 8d 50 ff 89 55 50 85 c0 75 86 <0f> 0b eb 82 0f 0b eb b3 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90
[43929.458081] RSP: 0018:ffff888140f9f4b0 EFLAGS: 00010246
[43929.458086] RAX: 0000000000000000 RBX: ffff8881434f5288 RCX: dffffc0000000000
[43929.458090] RDX: 00000000ffffffff RSI: ffffffffa26d28a7 RDI: ffff88810ecc9550
[43929.458093] RBP: ffff88810ecc9500 R08: 0000000000000001 R09: ffffed10281f3e8f
[43929.458096] R10: 0000000000000003 R11: ffff0000ffff0000 R12: ffff8881434f52a0
[43929.458100] R13: ffff888140f9f5f4 R14: ffff888151c7a800 R15: 0000000000000002
[43929.458103] FS:  00007f0c687c4740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000
[43929.458107] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[43929.458111] CR2: 00007f58dbe5b008 CR3: 0000000123602005 CR4: 00000000001706f0
[43929.458114] Call Trace:
[43929.458118]  <TASK>
[43929.458121]  ? __warn+0x9f/0x1a0
[43929.458127]  ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458188]  ? report_bug+0x1b1/0x1e0
[43929.458196]  ? handle_bug+0x3c/0x70
[43929.458200]  ? exc_invalid_op+0x17/0x40
[43929.458211]  ? nft_setelem_data_deactivate+0xd7/0xf0 [nf_tables]
[43929.458271]  ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458332]  nft_mapelem_deactivate+0x24/0x30 [nf_tables]
[43929.458392]  nft_rhash_walk+0xdd/0x180 [nf_tables]
[43929.458453]  ? __pfx_nft_rhash_walk+0x10/0x10 [nf_tables]
[43929.458512]  ? rb_insert_color+0x2e/0x280
[43929.458520]  nft_map_deactivate+0xdc/0x1e0 [nf_tables]
[43929.458582]  ? __pfx_nft_map_deactivate+0x10/0x10 [nf_tables]
[43929.458642]  ? __pfx_nft_mapelem_deactivate+0x10/0x10 [nf_tables]
[43929.458701]  ? __rcu_read_unlock+0x46/0x70
[43929.458709]  nft_delset+0xff/0x110 [nf_tables]
[43929.458769]  nft_flush_table+0x16f/0x460 [nf_tables]
[43929.458830]  nf_tables_deltable+0x501/0x580 [nf_tables]

Fixes: 628bd3e49c ("netfilter: nf_tables: drop map element references from preparation phase")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-17 17:43:11 +02:00
Pablo Neira Ayuso
efefd4f00c netfilter: nf_tables: missing iterator type in lookup walk
Add missing decorator type to lookup expression and tighten WARN_ON_ONCE
check in pipapo to spot earlier that this is unset.

Fixes: 29b359cf6d ("netfilter: nft_set_pipapo: walk over current view on netlink dump")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-17 17:43:01 +02:00
Kuppuswamy Sathyanarayanan
a29e5290e3 PCI/AER: Update aer-inject tool source URL
The aer-inject tool is no longer maintained in the original repository
and is missing a fix related to the musl library. So, with the author's
(Huang Ying) consent, it has been moved to a new repository [1].

Update all references to the repository link.

Link: https://github.com/intel/aer-inject.git [1]
Link: https://lore.kernel.org/r/20240416055035.200085-1-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Huang Ying <ying.huang@intel.com>
2024-04-17 10:35:43 -05:00
Sven Schnelle
d111855ab7 s390/mm: Fix NULL pointer dereference
The recently added check to figure out if a fault happened on gmap ASCE
dereferences the gmap pointer in lowcore without checking that it is not
NULL. For all non-KVM processes the pointer is NULL, so that some value
from lowcore will be read. With the current layouts of struct gmap and
struct lowcore the read value (aka ASCE) is zero, so that this doesn't lead
to any observable bug; at least currently.

Fix this by adding the missing NULL pointer check.

Fixes: 64c3431808 ("s390/entry: compare gmap asce to determine guest/host fault")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-04-17 17:26:34 +02:00
Jens Axboe
df604d2ad4 io_uring/rw: ensure retry condition isn't lost
A previous commit removed the checking on whether or not it was possible
to retry a request, since it's now possible to retry any of them. This
would previously have caused the request to have been ended with an error,
but now the retry condition can simply get lost instead.

Cleanup the retry handling and always just punt it to task_work, which
will queue it with io-wq appropriately.

Reported-by: Changhui Zhong <czhong@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Fixes: cca6571381 ("io_uring/rw: cleanup retry path")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-17 09:23:55 -06:00
Chaitanya S Prakash
6b718ac687 perf tools: Enable configs required for test_uprobe_from_different_cu.sh
Test "perf probe of function from different CU" fails due to certain
configs not being enabled. Building the kernel with
CONFIG_KPROBE_EVENTS=y and CONFIG_UPROBE_EVENTS=y fixes the issue. As
CONFIG_KPROBE_EVENTS is dependent on CONFIG_KPROBES, enable it as well.
Some platforms enable these configs as a part of their defconfig, so
this change is only required for the ones that don't do so.

Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240408062230.1949882-1-ChaitanyaS.Prakash@arm.com
Link: https://lore.kernel.org/r/20240408062230.1949882-7-ChaitanyaS.Prakash@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-04-17 12:21:39 -03:00