Commit graph

1,296,507 commits

Author SHA1 Message Date
Alexander Gordeev
5fb50fa66a s390/boot: Make .amode31 section address range explicit
This is a preparatory rework to allow uncoupling virtual
and physical addresses spaces.

Introduce .amode31 section address range AMODE31_START
and AMODE31_END macros for later use.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-04-17 13:38:00 +02:00
Alexander Gordeev
7de0446f0b s390/boot: Make identity mapping base address explicit
This is a preparatory rework to allow uncoupling virtual
and physical addresses spaces.

Currently the identity mapping base address is implicit
and is always set to zero. Make it explicit by putting
into __identity_base persistent boot variable and use it
in proper context - which is the value of PAGE_OFFSET.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-04-17 13:38:00 +02:00
Alexander Gordeev
3bb11234b1 s390/boot: Uncouple virtual and physical kernel offsets
This is a preparatory rework to allow uncoupling virtual
and physical addresses spaces.

Currently __kaslr_offset is the kernel offset in both
physical memory on boot and in virtual memory after DAT
mode is enabled.

Uncouple these offsets and rename the physical address
space variant to __kaslr_offset_phys while keep the name
__kaslr_offset for the offset in virtual address space.

Do not use __kaslr_offset_phys after DAT mode is enabled
just yet, but still make it a persistent boot variable
for later use.

Use __kaslr_offset and __kaslr_offset_phys offsets in
proper contexts and alter handle_relocs() function to
distinguish between the two.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-04-17 13:38:00 +02:00
Alexander Gordeev
236f324b74 s390/mm: Create virtual memory layout structure
This is a preparatory rework to allow uncoupling virtual
and physical addresses spaces.

Put virtual memory layout information into a structure
to improve code generation when accessing the structure
members, which are currently only ident_map_size and
__kaslr_offset.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-04-17 13:38:00 +02:00
Alexander Gordeev
bbe72f3902 s390/mm: Move KASLR related to <asm/page.h>
Move everyting KASLR related to <asm/page.h>,
similarly to many other architectures.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-04-17 13:38:00 +02:00
Alexander Gordeev
c8aef260c8 s390/boot: Swap vmalloc and Lowcore/Real Memory Copy areas
This is a preparatory rework to allow uncoupling virtual
and physical addresses spaces.

Currently the order of virtual memory areas is (the lowcore
and .amode31 section are skipped, as it is irrelevant):

	identity mapping (the kernel is contained within)
	vmemmap
	vmalloc
	modules
	Absolute Lowcore
	Real Memory Copy

In the future the kernel will be mapped separately and placed
to the end of the virtual address space, so the layout would
turn like this:

	identity mapping
	vmemmap
	vmalloc
	modules
	Absolute Lowcore
	Real Memory Copy
	kernel

However, the distance between kernel and modules needs to be as
little as possible, ideally - none. Thus, the Absolute Lowcore
and Real Memory Copy areas would stay in the way and therefore
need to be moved as well:

	identity mapping
	vmemmap
	Absolute Lowcore
	Real Memory Copy
	vmalloc
	modules
	kernel

To facilitate such layout swap the vmalloc and Absolute Lowcore
together with Real Memory Copy areas. As result, the current
layout turns into:

	identity mapping (the kernel is contained within)
	vmemmap
	Absolute Lowcore
	Real Memory Copy
	vmalloc
	modules

This will allow to locate the kernel directly next to the
modules once it gets mapped separately.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-04-17 13:37:59 +02:00
Alexander Gordeev
ecf74da64d s390/boot: Reduce size of identity mapping on overlap
In case vmemmap array could overlap with vmalloc area on
virtual memory layout setup, the size of vmalloc area
is decreased. That could result in less memory than user
requested with vmalloc= kernel command line parameter.
Instead, reduce the size of identity mapping (and the
size of vmemmap array as result) to avoid such overlap.

Further, currently the virtual memmory allocation "rolls"
from top to bottom and it is only VMALLOC_START that could
get increased due to the overlap. Change that to decrease-
only, which makes the whole allocation algorithm more easy
to comprehend.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-04-17 13:37:59 +02:00
Alexander Gordeev
b2b15f079c s390/boot: Consider DCSS segments on memory layout setup
The maximum mappable physical address (as returned by
arch_get_mappable_range() callback) is limited by the
value of (1UL << MAX_PHYSMEM_BITS).

The maximum physical address available to a DCSS segment
is 512GB.

In case the available online or offline memory size is less
than the DCSS limit arch_get_mappable_range() would include
never used [512GB..(1UL << MAX_PHYSMEM_BITS)] range.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-04-17 13:37:59 +02:00
Alexander Gordeev
47bf817672 s390/boot: Do not force vmemmap to start at MAX_PHYSMEM_BITS
vmemmap is forcefully set to start at MAX_PHYSMEM_BITS at most.
That could be needed in the past to limit ident_map_size to
MAX_PHYSMEM_BITS. However since commit 75eba6ec0de1 ("s390:
unify identity mapping limits handling") ident_map_size is
limited in setup_ident_map_size() function, which is called
earlier.

Another reason to limit vmemmap start to MAX_PHYSMEM_BITS is
because it was returned by arch_get_mappable_range() as the
maximum mappable physical address. Since commit f641679dfe55
("s390/mm: rework arch_get_mappable_range() callback") that
is not required anymore.

As result, there is no neccessity to limit vmemmap starting
address with MAX_PHYSMEM_BITS.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-04-17 13:37:59 +02:00
Nina Schoetterl-Glausch
22fdd8ba61 KVM: s390: vsie: Use virt_to_phys for facility control block
In order for SIE to interpretively execute STFLE, it requires the real
or absolute address of a facility-list control block.
Before writing the location into the shadow SIE control block, convert
it from a virtual address.
We currently do not run into this bug because the lower 31 bits are the
same for virtual and physical addresses.

Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Link: https://lore.kernel.org/r/20240319164420.4053380-3-nsg@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20240319164420.4053380-3-nsg@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-04-17 13:37:59 +02:00
Alexander Gordeev
08a36a4854 sched/vtime: Do not include <asm/vtime.h> header
There is no architecture-specific code or data left
that generic <linux/vtime.h> needs to know about.
Thus, avoid the inclusion of <asm/vtime.h> header.

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/f7cd245668b9ae61a55184871aec494ec9199c4a.1712760275.git.agordeev@linux.ibm.com
2024-04-17 13:37:23 +02:00
Alexander Gordeev
036cbbafbd s390/irq,nmi: Include <asm/vtime.h> header directly
update_timer_sys() and update_timer_mcck() are inlines used for
CPU time accounting from the interrupt and machine-check handlers.
These routines are specific to s390 architecture, but included
via <linux/vtime.h> header implicitly. Avoid the extra loop and
include <asm/vtime.h> header directly.

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/3fb696637c0eb7e9d6ffd6cbf9e647d7c5986b3d.1712760275.git.agordeev@linux.ibm.com
2024-04-17 13:37:22 +02:00
Alexander Gordeev
60b8edba14 s390/vtime: Remove unused __ARCH_HAS_VTIME_TASK_SWITCH leftover
__ARCH_HAS_VTIME_TASK_SWITCH macro is not used anymore.

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/b1055852eab0ffea33ad16c92d6a825c83037c3e.1712760275.git.agordeev@linux.ibm.com
2024-04-17 13:37:21 +02:00
Alexander Gordeev
89d6910cc5 sched/vtime: Get rid of generic vtime_task_switch() implementation
The generic vtime_task_switch() implementation gets built only
if __ARCH_HAS_VTIME_TASK_SWITCH is not defined, but requires an
architecture to implement arch_vtime_task_switch() callback at
the same time, which is confusing.

Further, arch_vtime_task_switch() is implemented for 32-bit PowerPC
architecture only and vtime_task_switch() generic variant is rather
superfluous.

Simplify the whole vtime_task_switch() wiring by moving the existing
generic implementation to PowerPC.

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2cb6e3caada93623f6d4f78ad938ac6cd0e2fda8.1712760275.git.agordeev@linux.ibm.com
2024-04-17 13:37:20 +02:00
Alexander Gordeev
37f36cab53 sched/vtime: Remove confusing arch_vtime_task_switch() declaration
Callback arch_vtime_task_switch() is only defined when
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is selected. Yet, the
function prototype forward declaration is present for
CONFIG_VIRT_CPU_ACCOUNTING_GEN variant. Remove it.

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/783d7c611864f82b0fb9edf01890b9396f3a549a.1712760275.git.agordeev@linux.ibm.com
2024-04-17 13:37:19 +02:00
Uwe Kleine-König
ea2624b5b8 serial: stm32: Reset .throttled state in .startup()
When an UART is opened that still has .throttled set from a previous
open, the RX interrupt is enabled but the irq handler doesn't consider
it. This easily results in a stuck irq with the effect to occupy the CPU
in a tight loop.

So reset the throttle state in .startup() to ensure that RX irqs are
handled.

Fixes: d1ec8a2eab ("serial: stm32: update throttle and unthrottle ops for dma mode")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/a784f80d3414f7db723b2ec66efc56e1ad666cbf.1713344161.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17 13:26:45 +02:00
Uwe Kleine-König
13c785323b serial: stm32: Return IRQ_NONE in the ISR if no handling happend
If there is a stuck irq that the handler doesn't address, returning
IRQ_HANDLED unconditionally makes it impossible for the irq core to
detect the problem and disable the irq. So only return IRQ_HANDLED if
an event was handled.

A stuck irq is still problematic, but with this change at least it only
makes the UART nonfunctional instead of occupying the (usually only) CPU
by 100% and so stall the whole machine.

Fixes: 48a6092fb4 ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/5f92603d0dfd8a5b8014b2b10a902d91e0bb881f.1713344161.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17 13:26:45 +02:00
Ilya Denisyev
c6854e5a26
jffs2: prevent xattr node from overflowing the eraseblock
Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.

Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:

jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead

This breaks the filesystem and can lead to KASAN crashes such as:

BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0xc6/0x120
 print_report+0xc4/0x620
 ? __virt_addr_valid+0x308/0x5b0
 kasan_report+0xc1/0xf0
 ? jffs2_sum_add_kvec+0x125e/0x15d0
 ? jffs2_sum_add_kvec+0x125e/0x15d0
 jffs2_sum_add_kvec+0x125e/0x15d0
 jffs2_flash_direct_writev+0xa8/0xd0
 jffs2_flash_writev+0x9c9/0xef0
 ? __x64_sys_setxattr+0xc4/0x160
 ? do_syscall_64+0x69/0x140
 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
 [...]

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: aa98d7cf59 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Signed-off-by: Ilya Denisyev <dev@elkcl.ru>
Link: https://lore.kernel.org/r/20240412155357.237803-1-dev@elkcl.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-04-17 13:21:34 +02:00
Parker Newman
b86ae40ffc serial: exar: adding missing CTI and Exar PCI ids
- Added Connect Tech and Exar IDs not already in pci_ids.h

Signed-off-by: Parker Newman <pnewman@connecttech.com>
Link: https://lore.kernel.org/r/7c3d8e795a864dd9b0a00353b722060dc27c4e09.1713270624.git.pnewman@connecttech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17 13:16:37 +02:00
Guanbing Huang
64c79dfbc4 serial: 8250_pnp: Support configurable reg shift property
The 16550a serial port based on the ACPI table requires obtaining the
reg-shift attribute. In the ACPI scenario, If the reg-shift property
is not configured like in DTS, the 16550a serial driver cannot read or
write controller registers properly during initialization.

Signed-off-by: Guanbing Huang <albanhuang@tencent.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bing Fan <tombinfan@tencent.com>
Tested-by: Linheng Du <dylanlhdu@tencent.com>
Link: https://lore.kernel.org/r/4726ecea8f7bfbfe42501b4f6ad9fe5b38994574.1713234515.git.albanhuang@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17 13:14:30 +02:00
Guanbing Huang
18ba7f2d99 serial: port: Add support of PNP IRQ to __uart_read_properties()
The function __uart_read_properties doesn't cover PNP devices, so add IRQ
processing for PNP devices in the branch.

Signed-off-by: Guanbing Huang <albanhuang@tencent.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bing Fan <tombinfan@tencent.com>
Tested-by: Linheng Du <dylanlhdu@tencent.com>
Link: https://lore.kernel.org/r/7f4ca31ef1cab4c6ecad22fafd82117686b696be.1713234515.git.albanhuang@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17 13:14:30 +02:00
Guanbing Huang
2a49b45cd0 PNP: Add dev_is_pnp() macro
Add dev_is_pnp() macro to determine whether the device is a PNP device.

Signed-off-by: Guanbing Huang <albanhuang@tencent.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Bing Fan <tombinfan@tencent.com>
Tested-by: Linheng Du <dylanlhdu@tencent.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/4e68f5557ad53b671ca8103e572163eca52a8f29.1713234515.git.albanhuang@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17 13:14:30 +02:00
Andy Shevchenko
c205edcd86 serial: 8250_dw: Hide a cast in dw8250_serial_inq()
dw8250_serial_inq() uses unsigned int variable to store 8-bit value.
Due to that it needs a cast which can be avoided by switching to use
u8 instead of unsigned int.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240412173937.187442-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17 13:14:09 +02:00
Andy Shevchenko
6a533ed735 serial: 8250_dw: Deduplicate LCR checks
All callers of dw8250_check_lcr() perform the same check.
Deduplicate it by moving them into respective call.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240412173931.187411-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17 13:14:06 +02:00
Alexander Stein
5cb90c636d tty: serial: fsl_lpuart: use dev_err_probe for clocks
Clocks might not be available yet when probing lpuart. Silence -517 errors
by using dev_err_probe.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240411130449.1096090-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17 13:14:04 +02:00
Esben Haabendal
e533e4c62e serial: imx: Introduce timeout when waiting on transmitter empty
By waiting at most 1 second for USR2_TXDC to be set, we avoid a potential
deadlock.

In case of the timeout, there is not much we can do, so we simply ignore
the transmitter state and optimistically try to continue.

Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/919647898c337a46604edcabaf13d42d80c0915d.1712837613.git.esben@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17 13:13:57 +02:00
Andy Shevchenko
abcd8632f2 serial: core: Extract uart_alloc_xmit_buf() and uart_free_xmit_buf()
After conversion to the kfifo, it becomes possible to extract two helper
functions for better maintenance and code deduplication. Do it here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240409174057.1104262-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17 13:10:51 +02:00
Jiri Slaby (SUSE)
5f1149d2f4 serial: drop debugging WARN_ON_ONCE() from uart_put_char()
Pengfei Xu reports, that the -next commit 1788cf6a91 (tty: serial:
switch from circ_buf to kfifo) tries to emit a WARNING and that leads to
lockdep errors. Obviously we cannot print anything from uart_put_char()!

This WARN_ON_ONCE() was/is a debug aid to check if the condition in
uart_put_char() can happen at all. Pengfei Xu confirmed it can. Unlike
me and kbuild bot in my queue.

Second, I completely forgot about it, so I did not remove it in the
final version, nor mentioned it in the commit log.

Drop it now as we are all good. And we even have stack traces (and a
reproducer)!

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20240416071904.21440-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17 13:09:52 +02:00
Herman van Hazendonk
782b72a222 dt-bindings: pinctrl: qcom,pmic-mpp: add support for PM8901
The PM8901 is used alongside the APQ8060/MSM8660 on the APQ8060 Dragonboard
and HP TouchPad. It works the same as all others, so just add the
compatible string for this variant.

Signed-off-by: Herman van Hazendonk <github.com@herrie.org>
Message-ID: <20240417073532.3718510-1-github.com@herrie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-17 11:54:01 +02:00
Yujie Liu
9ef1ed26a6 selftests: fix netfilter path in Makefile
Netfilter tests have been moved to a subdir under selftests/net by
patch series [1]. Fix the path in selftests/Makefile accordingly.

This helps fix the following error:

    tools/testing/selftests$ make
    ...
    make[1]: Entering directory 'tools/testing/selftests'
    make[1]: *** netfilter: No such file or directory.  Stop.
    make[1]: Leaving directory 'tools/testing/selftests'

[1] https://lore.kernel.org/all/20240411233624.8129-1-fw@strlen.de/

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-17 10:48:09 +01:00
Arınç ÜNAL
af3b4b0e59 net: phy: mediatek-ge: do not disable EEE advertisement
The mediatek-ge PHY driver already disables EEE advertisement on the switch
PHYs but my testing [1] shows that it is somehow enabled afterwards.
Disabling EEE advertisement before the PHY driver initialises keeps it off.
Therefore, remove disabling EEE advertisement here as it's useless.

Link: https://lore.kernel.org/netdev/d286ea27-e911-4dcb-9037-b75f22b437b8@arinc9.com/ [1]
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-17 10:44:20 +01:00
Peng Fan
3ba11e684d pinctrl: pinconf-generic: print hex value
Hex value will be easier to match hardware register bits layout,
so same as pinconf_generic_dump_config, print hex value.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-ID: <20240412005128.2937486-1-peng.fan@oss.nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-17 10:53:44 +02:00
Linus Walleij
398c9955bd pinctrl: renesas: Fixes for v6.9
- Fix a dtbs_check warning on RZ/G3S,
   - Fix a lockdep warning on RZ/G2L.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZhkDAgAKCRCKwlD9ZEnx
 cA0nAQC3qUp+KQ9D53F1Mr5FdQd4GhNsqEG/iFxHkkrlKLyMwQEA7nQHcu2xseeS
 7C4wQROe2+DNdks5u3ye7IA7YtntYgY=
 =wObz
 -----END PGP SIGNATURE-----

Merge tag 'renesas-pinctrl-fixes-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into fixes

pinctrl: renesas: Fixes for v6.9

  - Fix a dtbs_check warning on RZ/G3S,
  - Fix a lockdep warning on RZ/G2L.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-17 10:51:19 +02:00
Krzysztof Kozlowski
9d2df36538 pinctrl: realtek: fix module autoloading
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.  Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240411064614.7409-5-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-17 10:43:50 +02:00
Krzysztof Kozlowski
abda4619f4 pinctrl: qcom: sm7150: fix module autoloading
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.  Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Message-ID: <20240411064614.7409-4-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-17 10:43:50 +02:00
Krzysztof Kozlowski
75589d6b11 pinctrl: loongson2: fix module autoloading
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.  Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240411064614.7409-3-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-17 10:43:50 +02:00
Krzysztof Kozlowski
d42005c03a pinctrl: mediatek: fix module autoloading
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.  Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20240411064614.7409-2-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-17 10:43:50 +02:00
Krzysztof Kozlowski
a310822fe7 pinctrl: freescale: imx8ulp: fix module autoloading
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.  Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240411064614.7409-1-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-17 10:43:50 +02:00
Luca Coelho
700c340195 drm/i915/display: tie DMC wakelock to DC5/6 state transitions
We only need DMC wakelocks when we allow DC5 and DC6 states.  Add the
calls to enable and disable DMC wakelock accordingly.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-5-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-17 11:41:23 +03:00
Luca Coelho
8a8dcb23b6 drm/i915/display: add module parameter to enable DMC wakelock
This feature should be disabled by default until properly tested and
mature.  Add a module parameter to enable the feature for testing,
while keeping it disabled by default for now.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-4-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-17 11:41:20 +03:00
Luca Coelho
fe3b3ed7ff drm/i915/display: don't allow DMC wakelock on older hardware
Only allow running DMC wakelock code if the display version is 20 or
greater.  Also check if DMC is loaded before enabling.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-3-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-17 11:41:13 +03:00
Luca Coelho
765425f598 drm/i915/display: add support for DMC wakelocks
In order to reduce the DC5->DC2 restore time, wakelocks have been
introduced in DMC so the driver can tell it when registers and other
memory areas are going to be accessed and keep their respective blocks
awake.

Implement this in the driver by adding the concept of DMC wakelocks.
When the driver needs to access memory which lies inside pre-defined
ranges, it will tell DMC to set the wakelock, access the memory, then
wait for a while and clear the wakelock.

The wakelock state is protected in the driver with spinlocks to
prevent concurrency issues.

BSpec: 71583
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-2-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-17 11:41:08 +03:00
Zhang Rui
72b8b94155 powercap: intel_rapl: Sort header files
Sort header files alphabetically.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-17 10:32:11 +02:00
David S. Miller
cb178ccb4a Merge branch 'mt7530-fixes'
Merge branch 'mr7530-fixes'

Arınç ÜNAL says:

====================
Fix port mirroring on MT7530 DSA subdriver

This patch series fixes the frames received on the local port (monitor
port) not being mirrored, and port mirroring for the MT7988 SoC switch.
====================

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
2024-04-17 08:56:51 +01:00
Arınç ÜNAL
2c606d1385 net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
The "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version)
v0.1" document shows bits 16 to 18 as the MIRROR_PORT field of the CPU
forward control register. Currently, the MT7530 DSA subdriver configures
bits 0 to 2 of the CPU forward control register which breaks the port
mirroring feature for the MT7988 SoC switch.

Fix this by using the MT7531_MIRROR_PORT_GET() and MT7531_MIRROR_PORT_SET()
macros which utilise the correct bits.

Fixes: 110c18bfed ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-17 08:56:36 +01:00
Arınç ÜNAL
d59cf049c8 net: dsa: mt7530: fix mirroring frames received on local port
This switch intellectual property provides a bit on the ARL global control
register which controls allowing mirroring frames which are received on the
local port (monitor port). This bit is unset after reset.

This ability must be enabled to fully support the port mirroring feature on
this switch intellectual property.

Therefore, this patch fixes the traffic not being reflected on a port,
which would be configured like below:

  tc qdisc add dev swp0 clsact

  tc filter add dev swp0 ingress matchall skip_sw \
  action mirred egress mirror dev swp0

As a side note, this configuration provides the hairpinning feature for a
single port.

Fixes: 37feab6076 ("net: dsa: mt7530: add support for port mirroring")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-17 08:56:36 +01:00
Chuanhong Guo
fb1f4584b1 USB: serial: option: add support for Fibocom FM650/FG650
Fibocom FM650/FG650 are 5G modems with ECM/NCM/RNDIS/MBIM modes.
This patch adds support to all 4 modes.

In all 4 modes, the first serial port is the AT console while the other
3 appear to be diagnostic interfaces for dumping modem logs.

usb-devices output for all modes:

ECM:
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0a04 Rev=04.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=FG650 Module
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=504mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

NCM:
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0a05 Rev=04.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=FG650 Module
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

RNDIS:
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0a06 Rev=04.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=FG650 Module
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

MBIM:
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0a07 Rev=04.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=FG650 Module
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2024-04-17 09:34:41 +02:00
Miri Korenblit
bada85a3f5 wifi: iwlwifi: mvm: return uid from iwl_mvm_build_scan_cmd
This function is supposed to return a uid on success, and an errno in
failure.
But it currently returns the return value of the specific cmd version
handler, which in turn returns 0 on success and errno otherwise.
This means that on success, iwl_mvm_build_scan_cmd will return 0
regardless if the actual uid.
Fix this by returning the uid if the handler succeeded.

Fixes: 687db6ff5b ("iwlwifi: scan: make new scan req versioning flow")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://msgid.link/20240415114847.5e2d602b3190.I4c4931021be74a67a869384c8f8ee7463e0c7857@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-17 09:28:28 +02:00
Avraham Stern
dbfff5bf92 wifi: iwlwifi: mvm: remove old PASN station when adding a new one
If a PASN station is added, and an old PASN station already exists
for the same mac address, remove the old station before adding the
new one. Keeping the old station caueses old security context to
be used in measurements.

Fixes: 0739a7d70e ("iwlwifi: mvm: initiator: add option for adding a PASN responder")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415114847.ef3544a416f2.I4e8c7c8ca22737f4f908ae5cd4fc0b920c703dd3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-17 09:28:11 +02:00
Felix Fietkau
8c75cdcdf8 wifi: mac80211: split mesh fast tx cache into local/proxied/forwarded
Depending on the origin of the packets (and their SA), 802.11 + mesh headers
could be filled in differently. In order to properly deal with that, add a
new field to the lookup key, indicating the type (local, proxied or
forwarded). This can fix spurious packet drop issues that depend on the order
in which nodes/hosts communicate with each other.

Fixes: d5edb9ae8d ("wifi: mac80211: mesh fast xmit support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240415121811.13391-1-nbd@nbd.name
[use sizeof_field() for key_len]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-17 09:21:32 +02:00