In order to satisfy the MIPI DSI initialization sequence the bridge
init order has been altered with the help of pre_enable_prev_first
in pre_enable and post_disable bridge operations.
Document the affected bridge init order with an example on the
bridge operations helpers.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230328170752.1102347-2-jagan@amarulasolutions.com
For a given bridge pipeline if any bridge sets pre_enable_prev_first
flag then the pre_enable for the previous bridge will be called before
pre_enable of this bridge and opposite is done for post_disable.
These are the potential bridge flags to alter bridge init order in order
to satisfy the MIPI DSI host and downstream panel or bridge to function.
However the existing pre_enable_prev_first logic with associated bridge
ordering has broken for both pre_enable and post_disable calls.
[pre_enable]
The altered bridge ordering has failed if two consecutive bridges on a
given pipeline enables the pre_enable_prev_first flag.
Example:
- Panel
- Bridge 1
- Bridge 2 pre_enable_prev_first
- Bridge 3
- Bridge 4 pre_enable_prev_first
- Bridge 5 pre_enable_prev_first
- Bridge 6
- Encoder
In this example, Bridge 4 and Bridge 5 have pre_enable_prev_first.
The logic looks for a bridge which enabled pre_enable_prev_first flag
on each iteration and assigned the previou bridge to limit pointer
if the bridge doesn't enable pre_enable_prev_first flags.
If control found Bridge 2 is pre_enable_prev_first then the iteration
looks for Bridge 3 and found it is not pre_enable_prev_first and assigns
it's previous Bridge 4 to limit pointer and calls pre_enable of Bridge 3
and Bridge 2 and assign iter pointer with limit which is Bridge 4.
Here is the actual problem, for the next iteration control look for
Bridge 5 instead of Bridge 4 has iter pointer in previous iteration
moved to Bridge 4 so this iteration skips the Bridge 4. The iteration
found Bridge 6 doesn't pre_enable_prev_first flags so the limit assigned
to Encoder. From next iteration Encoder skips as it is the last bridge
for reverse order pipeline.
So, the resulting pre_enable bridge order would be,
- Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5.
This patch fixes this by assigning limit to next pointer instead of
previous bridge since the iteration always looks for bridge that does
NOT request prev so assigning next makes sure the last bridge on a
given iteration what exactly the limit bridge is.
So, the resulting pre_enable bridge order with fix would be,
- Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5, Bridge 4,
Encoder.
[post_disable]
The altered bridge ordering has failed if two consecutive bridges on a
given pipeline enables the pre_enable_prev_first flag.
Example:
- Panel
- Bridge 1
- Bridge 2 pre_enable_prev_first
- Bridge 3
- Bridge 4 pre_enable_prev_first
- Bridge 5 pre_enable_prev_first
- Bridge 6
- Encoder
In this example Bridge 5 and Bridge 4 have pre_enable_prev_first.
The logic looks for a bridge which enabled pre_enable_prev_first flags
on each iteration and assigned the previou bridge to next and next to
limit pointer if the bridge does enable pre_enable_prev_first flag.
If control starts from Bridge 6 then it found next Bridge 5 is
pre_enable_prev_first and immediately the next assigned to previous
Bridge 6 and limit assignments to next Bridge 6 and call post_enable
of Bridge 6 even though the next consecutive Bridge 5 is enabled with
pre_enable_prev_first. This clearly misses the logic to find the state
of next conducive bridge as everytime the next and limit assigns
previous bridge if given bridge enabled pre_enable_prev_first.
So, the resulting post_disable bridge order would be,
- Encoder, Bridge 6, Bridge 5, Bridge 4, Bridge 3, Bridge 2, Bridge 1,
Panel.
This patch fixes this by assigning next with previou bridge only if the
bridge doesn't enable pre_enable_prev_first flag and the next further
assign it to limit. This way we can find the bridge that NOT requested
prev to disable last.
So, the resulting pre_enable bridge order with fix would be,
- Encoder, Bridge 4, Bridge 5, Bridge 6, Bridge 2, Bridge 3, Bridge 1,
Panel.
Validated the bridge init ordering by incorporating dummy bridges in
the sun6i-mipi-dsi pipeline
Fixes: 4fb912e5e1 ("drm/bridge: Introduce pre_enable_prev_first to alter bridge init order")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230328170752.1102347-1-jagan@amarulasolutions.com
On Arrow Lake S systems, MEI is no longer strictly connected to bus 0,
while graphics remain exclusively on bus 0. Adapt the component
matching logic to accommodate this change:
Original behavior: Required both MEI and graphics to be on the same
bus 0.
New behavior: Only enforces graphics to be on bus 0 (integrated),
allowing MEI to reside on any bus.
This ensures compatibility with Arrow Lake S and maintains functionality
for the legacy systems.
Fixes: 1dd924f688 ("mei: gsc_proxy: add gsc proxy driver")
Cc: stable@vger.kernel.org # v6.3+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240220200020.231192-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For CMA memory allocation, ownership is assigned to DSP to make it
accessible by the PD running on the DSP. With current implementation
HLOS VM is stored in the channel structure during rpmsg_probe and
this VM is passed to qcom_scm call as the source VM.
The qcom_scm call will overwrite the passed source VM with the next
VM which would cause a problem in case the scm call is again needed.
Adding a local copy of source VM whereever scm call is made to avoid
this problem.
Fixes: 0871561055 ("misc: fastrpc: Add support for audiopd")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240224114247.85953-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/198112757eac0fc004677a4757ce48ae7c7194ab.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/705b89c3cd7c0a42ce3f482f202204f5e3377aa2.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/4b964bd133f5af11cabd51a4d8ed95025583eb93.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/250337c967bdb5019a3c9fe8e0d082cd65400227.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/946ebc33a01bf700171257cd219fbe8626bc0c99.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/8e7179794ffbcaa4ad3d0db50cc4aa03f377fc8c.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/8e14f0b1cea107e613fa0075b3379a9f1e7ef63f.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/8775e9573fec55c5fc04151800829e9aeafc5dda.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/d138bc7f6ec39038d2b5a23478fc036a41988bde.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/add08320eef9ea20ceca78648370590a4bd447b0.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/45719fc31bb893bb9ab1450057e9cb7f399e9ee2.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20240304180829.1201726-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Assign all possible fields of pinfo in variable declaration, instead of
just zeroing it there.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-and-Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Link: https://lore.kernel.org/r/20240219195807.517742-4-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vsc_tp_wakeup_request() called wait_event_timeout() with
gpiod_get_value_cansleep() which may sleep, and does so as the
implementation is that of gpio-ljca.
Move the GPIO state check outside the call.
Fixes: 566f5ca976 ("mei: Add transport driver for IVSC device")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-and-Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Link: https://lore.kernel.org/r/20240219195807.517742-3-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hard IRQ handler vsc_tp_irq() is called with a raw spinlock taken.
wake_up() acquires a spinlock, a sleeping lock on PREEMPT_RT. This leads
to sleeping in atomic context.
Move the wake_up() call to the threaded IRQ handler vsc_tp_thread_isr()
where it can be safely called.
Fixes: 566f5ca976 ("mei: Add transport driver for IVSC device")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-and-Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Link: https://lore.kernel.org/r/20240219195807.517742-2-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .shutdown(), .remove(), and power management callbacks are never called
unless .probe() has already returned success, which means it has set
drvdata to a non-NULL pointer, so "dev" can never be NULL in the other
callbacks.
Remove the unnecessary checks.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240229181300.352077-4-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .shutdown(), .remove(), and power management callbacks are never called
unless .probe() has already returned success, which means it has set
drvdata to a non-NULL pointer, so "dev" can never be NULL in the other
callbacks.
Remove the unnecessary checks.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240229181300.352077-3-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() and power management callbacks are never called unless
.probe() has already returned success, which means it has set drvdata to a
non-NULL pointer, so "dev" can never be NULL in the other callbacks.
Remove the unnecessary checks.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240229181300.352077-2-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi_test devices have a couple of timers (ai_timer and ao_timer)
that can be started to simulate hardware interrupts. Their expiry
functions normally reschedule the timer. The driver code calls either
del_timer_sync() or del_timer() to delete the timers from the queue, but
does not currently prevent the timers from rescheduling themselves so
synchronized deletion may be ineffective.
Add a couple of boolean members (one for each timer: ai_timer_enable and
ao_timer_enable) to the device private data structure to indicate
whether the timers are allowed to reschedule themselves. Set the member
to true when adding the timer to the queue, and to false when deleting
the timer from the queue in the waveform_ai_cancel() and
waveform_ao_cancel() functions.
The del_timer_sync() function is also called from the waveform_detach()
function, but the timer enable members will already be set to false when
that function is called, so no change is needed there.
Fixes: 403fe7f34e ("staging: comedi: comedi_test: fix timer race conditions")
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20240214100747.16203-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SLAB_MEM_SPREAD flag is already a no-op after removal of SLAB
allocator and in [1] it was fully deprecated. Remove its usage so we can
delete it from slab. No functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz/
Message-Id: <20240224135229.830356-1-chengming.zhou@linux.dev>
The SLAB_MEM_SPREAD flag is already a no-op after removal of SLAB
allocator and in [1] it was fully deprecated. Remove its usage so we can
delete it from slab. No functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz/
Message-Id: <20240224135118.830073-1-chengming.zhou@linux.dev>
Rename function GetHalfNmodeSupportByAPsHandler to
get_half_nmode_support_by_aps_handler to fix checkpatch
warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240229024325.453374-9-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function rtllib_FlushRxTsPendingPkts to
rtllib_flush_rx_ts_pending_pkts to fix checkpatch warning Avoid
CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240229024325.453374-8-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function rtllib_send_ADDBARsp to rtllib_send_add_ba_rsp
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240229024325.453374-5-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename function rtllib_send_ADDBAReq to rtllib_send_add_ba_req
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240229024325.453374-4-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add tabs and spaces to fix checkpatch warning: 'Alignment should match
open parenthesis'
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240229024325.453374-2-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SLAB_MEM_SPREAD flag is already a no-op after removal of SLAB
allocator and in [1] it was fully deprecated. Remove its usage so we can
delete it from slab. No functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-1-02f1753e8303@suse.cz/
Message-Id: <20240224134901.829591-1-chengming.zhou@linux.dev>
Rename function MgntQuery_MgntFrameTxRate to mgnt_query_mgnt_frame_tx_rate
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240227044157.407379-21-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename variable asSta to addr as it references bssid addr,
and fixes checkpatch warning Avoid CamelCase,
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240227044157.407379-18-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>