Commit graph

1,296,507 commits

Author SHA1 Message Date
David Woodhouse
8e62bf2bfa KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
Linux guests since commit b1c3497e60 ("x86/xen: Add support for
HVMOP_set_evtchn_upcall_vector") in v6.0 onwards will use the per-vCPU
upcall vector when it's advertised in the Xen CPUID leaves.

This upcall is injected through the guest's local APIC as an MSI, unlike
the older system vector which was merely injected by the hypervisor any
time the CPU was able to receive an interrupt and the upcall_pending
flags is set in its vcpu_info.

Effectively, that makes the per-CPU upcall edge triggered instead of
level triggered, which results in the upcall being lost if the MSI is
delivered when the local APIC is *disabled*.

Xen checks the vcpu_info->evtchn_upcall_pending flag when the local APIC
for a vCPU is software enabled (in fact, on any write to the SPIV
register which doesn't disable the APIC). Do the same in KVM since KVM
doesn't provide a way for userspace to intervene and trap accesses to
the SPIV register of a local APIC emulated by KVM.

Fixes: fde0451be8 ("KVM: x86/xen: Support per-vCPU event channel upcall via local APIC")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240227115648.3104-3-dwmw2@infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-03-04 16:22:36 -08:00
David Woodhouse
451a707813 KVM: x86/xen: improve accuracy of Xen timers
A test program such as http://david.woodhou.se/timerlat.c confirms user
reports that timers are increasingly inaccurate as the lifetime of a
guest increases. Reporting the actual delay observed when asking for
100µs of sleep, it starts off OK on a newly-launched guest but gets
worse over time, giving incorrect sleep times:

root@ip-10-0-193-21:~# ./timerlat -c -n 5
00000000 latency 103243/100000 (3.2430%)
00000001 latency 103243/100000 (3.2430%)
00000002 latency 103242/100000 (3.2420%)
00000003 latency 103245/100000 (3.2450%)
00000004 latency 103245/100000 (3.2450%)

The biggest problem is that get_kvmclock_ns() returns inaccurate values
when the guest TSC is scaled. The guest sees a TSC value scaled from the
host TSC by a mul/shift conversion (hopefully done in hardware). The
guest then converts that guest TSC value into nanoseconds using the
mul/shift conversion given to it by the KVM pvclock information.

But get_kvmclock_ns() performs only a single conversion directly from
host TSC to nanoseconds, giving a different result. A test program at
http://david.woodhou.se/tsdrift.c demonstrates the cumulative error
over a day.

It's non-trivial to fix get_kvmclock_ns(), although I'll come back to
that. The actual guest hv_clock is per-CPU, and *theoretically* each
vCPU could be running at a *different* frequency. But this patch is
needed anyway because...

The other issue with Xen timers was that the code would snapshot the
host CLOCK_MONOTONIC at some point in time, and then... after a few
interrupts may have occurred, some preemption perhaps... would also read
the guest's kvmclock. Then it would proceed under the false assumption
that those two happened at the *same* time. Any time which *actually*
elapsed between reading the two clocks was introduced as inaccuracies
in the time at which the timer fired.

Fix it to use a variant of kvm_get_time_and_clockread(), which reads the
host TSC just *once*, then use the returned TSC value to calculate the
kvmclock (making sure to do that the way the guest would instead of
making the same mistake get_kvmclock_ns() does).

Sadly, hrtimers based on CLOCK_MONOTONIC_RAW are not supported, so Xen
timers still have to use CLOCK_MONOTONIC. In practice the difference
between the two won't matter over the timescales involved, as the
*absolute* values don't matter; just the delta.

This does mean a new variant of kvm_get_time_and_clockread() is needed;
called kvm_get_monotonic_and_clockread() because that's what it does.

Fixes: 5363952605 ("KVM: x86/xen: handle PV timers oneshot mode")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20240227115648.3104-2-dwmw2@infradead.org
[sean: massage moved comment, tweak if statement formatting]
Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-03-04 16:22:32 -08:00
John Harrison
e45afbeb59 drm/i915/guc: Correct capture of EIR register on hang
The EIR register (0x20B0) was being included in the engine class list
for render and compute as the absolute register address. However, it
is actually a ring register available on all engines at an offset of
(base) + 0xB0. As it was included as an RCS engine but with the
absolute address, GuC was adding on another 0x2000 and coming out at
an invalid location. Thus it would reject the register and complain
about only managing a partial capture.

So update the list to use the RING_EIR version of the register and
include it for all engines.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223203204.1533410-1-John.C.Harrison@Intel.com
2024-03-04 15:35:22 -08:00
Dan Carpenter
8ede3db506 io_uring/net: fix overflow check in io_recvmsg_mshot_prep()
The "controllen" variable is type size_t (unsigned long).  Casting it
to int could lead to an integer underflow.

The check_add_overflow() function considers the type of the destination
which is type int.  If we add two positive values and the result cannot
fit in an integer then that's counted as an overflow.

However, if we cast "controllen" to an int and it turns negative, then
negative values *can* fit into an int type so there is no overflow.

Good: 100 + (unsigned long)-4 = 96  <-- overflow
 Bad: 100 + (int)-4 = 96 <-- no overflow

I deleted the cast of the sizeof() as well.  That's not a bug but the
cast is unnecessary.

Fixes: 9b0fc3c054 ("io_uring: fix types in io_recvmsg_multishot_overflow")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/138bd2e2-ede8-4bcc-aa7b-f3d9de167a37@moroto.mountain
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-04 16:33:15 -07:00
Muhammad Usama Anjum
86bcacc957 io_uring/net: correct the type of variable
The namelen is of type int. It shouldn't be made size_t which is
unsigned. The signed number is needed for error checking before use.

Fixes: c55978024d ("io_uring/net: move receive multishot out of the generic msghdr path")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240301144349.2807544-1-usama.anjum@collabora.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-03-04 16:33:11 -07:00
Alex Williamson
5b99241277 Revert "vfio/type1: Unpin zero pages"
This reverts commit 873aefb376.

This was a heinous workaround and it turns out it's been fixed in mm
twice since it was introduced.  Most recently, commit c8070b7875
("mm: Don't pin ZERO_PAGE in pin_user_pages()") would have prevented
running up the zeropage refcount, but even before that commit
84209e87c6 ("mm/gup: reliable R/O long-term pinning in COW mappings")
avoids the vfio use case from pinning the zeropage at all, instead
replacing it with exclusive anonymous pages.

Remove this now useless overhead.

Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240229223544.257207-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2024-03-04 16:11:07 -07:00
Ankit Agrawal
81617c17bf vfio/nvgrace-gpu: Convey kvm to map device memory region as noncached
The NVIDIA Grace Hopper GPUs have device memory that is supposed to be
used as a regular RAM. It is accessible through CPU-GPU chip-to-chip
cache coherent interconnect and is present in the system physical
address space. The device memory is split into two regions - termed
as usemem and resmem - in the system physical address space,
with each region mapped and exposed to the VM as a separate fake
device BAR [1].

Owing to a hardware defect for Multi-Instance GPU (MIG) feature [2],
there is a requirement - as a workaround - for the resmem BAR to
display uncached memory characteristics. Based on [3], on system with
FWB enabled such as Grace Hopper, the requisite properties
(uncached, unaligned access) can be achieved through a VM mapping (S1)
of NORMAL_NC and host mapping (S2) of MT_S2_FWB_NORMAL_NC.

KVM currently maps the MMIO region in S2 as MT_S2_FWB_DEVICE_nGnRE by
default. The fake device BARs thus displays DEVICE_nGnRE behavior in the
VM.

The following table summarizes the behavior for the various S1 and S2
mapping combinations for systems with FWB enabled [3].
S1           |  S2           | Result
NORMAL_NC    |  NORMAL_NC    | NORMAL_NC
NORMAL_NC    |  DEVICE_nGnRE | DEVICE_nGnRE

Recently a change was added that modifies this default behavior and
make KVM map MMIO as MT_S2_FWB_NORMAL_NC when a VMA flag
VM_ALLOW_ANY_UNCACHED is set [4]. Setting S2 as MT_S2_FWB_NORMAL_NC
provides the desired behavior (uncached, unaligned access) for resmem.

To use VM_ALLOW_ANY_UNCACHED flag, the platform must guarantee that
no action taken on the MMIO mapping can trigger an uncontained
failure. The Grace Hopper satisfies this requirement. So set
the VM_ALLOW_ANY_UNCACHED flag in the VMA.

Applied over next-20240227.
base-commit: 22ba90670a51

Link: https://lore.kernel.org/all/20240220115055.23546-4-ankita@nvidia.com/ [1]
Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu/ [2]
Link: https://developer.arm.com/documentation/ddi0487/latest/ section D8.5.5 [3]
Link: https://lore.kernel.org/all/20240224150546.368-1-ankita@nvidia.com/ [4]

Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Vikram Sethi <vsethi@nvidia.com>
Cc: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240229193934.2417-1-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2024-03-04 16:11:06 -07:00
Alex Williamson
c71f08cfb3 Merge branch 'kvm-arm64/vfio-normal-nc' of https://git.kernel.org/pub/scm/linux/kernel/git/oupton/linux into v6.9/vfio/next 2024-03-04 16:08:46 -07:00
Ji Sheng Teoh
747bdf912e i2c: cadence: Add system suspend and resume PM support
Enable device system suspend and resume PM support, and mark the device
state as suspended during system suspend to reject any data transfer.

Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-04 23:38:23 +01:00
Wolfram Sang
d0e9441504 i2c: mpc: remove outdated macro
DRV_NAME was useful back in the days. But here, being used once, it is
only cruft.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-04 23:36:31 +01:00
Wolfram Sang
401a8e9e3d i2c: mpc: use proper binding for transfer timeouts
"i2c-scl-clk-low-timeout-us" is wrongly used here because it describes
maximum clock stretching not maximum transfer time. Additionally, it is
deprecated because of issues. Move this driver to the correct binding.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-04 23:36:30 +01:00
Wolfram Sang
f9ccb4533b dt-bindings: i2c: mpc: use proper binding for transfer timeouts
"i2c-scl-clk-low-timeout-us" has flaws in itself and the usage here is
all wrong. The driver doesn't use it as a maximum time for clock
stretching but the maximum time for a total transfer. We already have
a binding for the latter. Convert the wrong binding from examples.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-04 23:36:26 +01:00
Geert Uytterhoeven
ec29d22cae vfio: amba: Rename pl330_ids[] to vfio_amba_ids[]
Obviously drivers/vfio/platform/vfio_amba.c started its life as a
simplified copy of drivers/dma/pl330.c, but not all variable names were
updated.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1d1b873b59b208547439225aee1f24d6f2512a1f.1708945194.git.geert+renesas@glider.be
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2024-03-04 15:10:49 -07:00
Martin KaFai Lau
8f50d5c423 Merge branch 'Allow struct_ops maps with a large number of programs'
Kui-Feng Lee says:

====================
The BPF struct_ops previously only allowed for one page to be used for
the trampolines of all links in a map. However, we have recently run
out of space due to the large number of BPF program links. By
allocating additional pages when we exhaust an existing page, we can
accommodate more links in a single map.

The variable st_map->image has been changed to st_map->image_pages,
and its type has been changed to an array of pointers to buffers of
PAGE_SIZE. Additional pages are allocated when all existing pages are
exhausted.

The test case loads a struct_ops maps having 40 programs. Their
trampolines takes about 6.6k+ bytes over 1.5 pages on x86.
---
Major differences from v3:

 - Refactor buffer allocations to bpf_struct_ops_tramp_buf_alloc() and
   bpf_struct_ops_tramp_buf_free().

Major differences from v2:

 - Move image buffer allocation to bpf_struct_ops_prepare_trampoline().

Major differences from v1:

 - Always free pages if failing to update.

 - Allocate 8 pages at most.

v3: https://lore.kernel.org/all/20240224030302.1500343-1-thinker.li@gmail.com/
v2: https://lore.kernel.org/all/20240221225911.757861-1-thinker.li@gmail.com/
v1: https://lore.kernel.org/all/20240216182828.201727-1-thinker.li@gmail.com/
====================

Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-03-04 14:09:24 -08:00
Kui-Feng Lee
93bc28d859 selftests/bpf: Test struct_ops maps with a large number of struct_ops program.
Create and load a struct_ops map with a large number of struct_ops
programs to generate trampolines taking a size over multiple pages. The
map includes 40 programs. Their trampolines takes 6.6k+, more than 1.5
pages, on x86.

Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240224223418.526631-4-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-03-04 14:09:24 -08:00
Kui-Feng Lee
187e2af05a bpf: struct_ops supports more than one page for trampolines.
The BPF struct_ops previously only allowed one page of trampolines.
Each function pointer of a struct_ops is implemented by a struct_ops
bpf program. Each struct_ops bpf program requires a trampoline.
The following selftest patch shows each page can hold a little more
than 20 trampolines.

While one page is more than enough for the tcp-cc usecase,
the sched_ext use case shows that one page is not always enough and hits
the one page limit. This patch overcomes the one page limit by allocating
another page when needed and it is limited to a total of
MAX_IMAGE_PAGES (8) pages which is more than enough for
reasonable usages.

The variable st_map->image has been changed to st_map->image_pages, and
its type has been changed to an array of pointers to pages.

Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240224223418.526631-3-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-03-04 14:09:20 -08:00
Bartosz Golaszewski
ad8ee969d7 of: make for_each_property_of_node() available to to !OF
for_each_property_of_node() is a macro and so doesn't have a stub inline
function for !OF. Move it out of the relevant #ifdef to make it available
to all users.

Fixes: 611cad7201 ("dt: add of_alias_scan and of_alias_get_id")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240303104853.31511-1-brgl@bgdev.pl
Signed-off-by: Rob Herring <robh@kernel.org>
2024-03-04 15:03:59 -06:00
Dharma Balasubiramani
aaef9cdc4b dt-bindings: interrupt-controller: Convert Atmel AIC to json-schema
Convert the Atmel AIC binding document to DT schema format using
json-schema.

Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240222090738.41628-1-dharma.b@microchip.com
Signed-off-by: Rob Herring <robh@kernel.org>
2024-03-04 15:03:59 -06:00
Christian König
8bc75586ea drm/amdgpu: workaround to avoid SET_Q_MODE packets v2
It turned out that executing the SET_Q_MODE packet on every submission
creates to much overhead.

Implement a workaround which allows skipping the SET_Q_MODE packet if
subsequent submissions all use the same parameters.

v2: add a NULL check for ring_obj

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04 15:59:08 -05:00
Christian König
c68cbbfd54 drm/amdgpu: cleanup conditional execution
First of all calculating the number of dw to patch into a
conditional execution is not something HW generation specific.
This is just standard ring buffer calculations. While at it also
reduce the BUG_ON() into WARN_ON().

Then instead of a random bit pattern use 0 as default value for
the number of dw skipped, this way it's not mandatory any more
to patch the conditional execution.

And last make the address to check a parameter of the
conditional execution instead of getting this from the ring.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04 15:59:08 -05:00
Ma Jun
86e14a7386 drm/amdgpu: Use rpm_mode flag instead of checking it again for rpm
Because the rpm_mode flag is already set when the driver
is initialized, we use it directly for runtime suspend/resume
instead of checking it again

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04 15:59:08 -05:00
Ma Jun
f317c5e583 drm/amdgpu/pm: Fix the error of pwm1_enable setting
Fix the pwm_mode value error which used for
pwm1_enable setting

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04 15:59:08 -05:00
Shashank Sharma
b8f67b9ddf drm/amdgpu: change vm->task_info handling
This patch changes the handling and lifecycle of vm->task_info object.
The major changes are:
- vm->task_info is a dynamically allocated ptr now, and its uasge is
  reference counted.
- introducing two new helper funcs for task_info lifecycle management
    - amdgpu_vm_get_task_info: reference counts up task_info before
      returning this info
    - amdgpu_vm_put_task_info: reference counts down task_info
- last put to task_info() frees task_info from the vm.

This patch also does logistical changes required for existing usage
of vm->task_info.

V2: Do not block all the prints when task_info not found (Felix)

V3: Fixed review comments from Felix
   - Fix wrong indentation
   - No debug message for -ENOMEM
   - Add NULL check for task_info
   - Do not duplicate the debug messages (ti vs no ti)
   - Get first reference of task_info in vm_init(), put last
     in vm_fini()

V4: Fixed review comments from Felix
   - fix double reference increment in create_task_info
   - change amdgpu_vm_get_task_info_pasid
   - additional changes in amdgpu_gem.c while porting

Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04 15:59:08 -05:00
Alex Deucher
68e05b932d drm/amd/display: handle range offsets in VRR ranges
Need to check the offset bits for values greater than 255.

v2: also update amdgpu_dm_connector values.

Suggested-by: Mano Ségransan <mano.segransan@protonmail.com>
Tested-by: Mano Ségransan <mano.segransan@protonmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3203
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04 15:59:08 -05:00
Hamza Mahfooz
10740e4782 drm/amd/display: add amdgpu_dm support for DCN351
Add Display Manager specific changes for DCN3.5.1.

Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04 15:59:08 -05:00
Hamza Mahfooz
2728e9c7c8 drm/amd/display: add DC changes for DCN351
Add DC support for DCN 3.5.1.

Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04 15:59:08 -05:00
Hamza Mahfooz
22b66700f6 drm/amd/display: add DCN351 IRQ changes
Add DCN3.5.1 interrupt support.

Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04 15:59:08 -05:00
Hamza Mahfooz
ebb20fc19a drm/amd/display: add DMUB source files and changes for DCN351
DMUB support is required to light-up displays.

Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04 15:59:07 -05:00
Hamza Mahfooz
3a80fe500e drm/amd: add register headers for DCN351
Add register headers for DCN 3.5.1.

Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04 15:59:07 -05:00
Hamza Mahfooz
1c1a92068d drm/amd/display: add DCN351 version identifiers
Add DCN3.5.1 ASIC identifiers.

Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04 15:59:07 -05:00
Jesse Zhang
feb13f52c8 Revert "drm/amdgpu: remove vm sanity check from amdgpu_vm_make_compute" for Raven
fix the issue:
"amdgpu: Failed to create process VM object".

[Why]when amdgpu initialized, seq64 do mampping and update bo mapping in vm page table.
But when clifo run. It also initializes a vm for a process device through the function kfd_process_device_init_vm and ensure the root PD is clean through the function amdgpu_vm_pt_is_root_clean.
So they have a conflict, and clinfo  always failed.

v1:
  - remove all the pte_supports_ats stuff from the amdgpu_vm code (Felix)

Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04 15:58:45 -05:00
Heiner Kallweit
8821c83769 i2c: smbus: Prepare i2c_register_spd for usage on muxed segments
If this is an adapter on a muxed bus segment, assume that each segment
is connected to a subset of the (> 8) overall memory slots. In this
case let's probe the maximum of 8 slots, however stop if the number
of overall populated slots is reached.

If we're not on a muxed segment and the total number of slots is > 8,
then warn because then not all SPD eeproms can be addressed.
Presumably the bus is muxed, but the mux config is missing.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[wsa: removed a superfluous printout]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2024-03-04 21:44:56 +01:00
Chancel Liu
755bb9a44f
ASoC: soc-core.c: Prefer to return dai->driver->name in snd_soc_dai_name_get()
ASoC machine driver can use snd_soc_{of_}get_dlc() (A) to get DAI name
for dlc (snd_soc_dai_link_component). In this function call
dlc->dai_name is parsed via snd_soc_dai_name_get() (B).

(A)	int snd_soc_get_dlc(...)
	{
		...
(B)		dlc->dai_name = snd_soc_dai_name_get(dai);
		...
	}

(B) has a priority to return dai->name as dlc->dai_name. In most cases
card can probe successfully. However it has an issue that ASoC tries to
rebind card. Here is a simplified flow for example:

 |	a) Card probes successfully at first
 |	b) One of the component bound to this card is removed for some
 |	   reason the component->dev is released
 |	c) That component is re-registered
 v	d) ASoC calls snd_soc_try_rebind_card()

a) points dlc->dai_name to dai->name. b) releases all resource of the
old DAI. c) creates new DAI structure. In result d) can not use
dlc->dai_name to add new created DAI.

So it's reasonable that prefer to return dai->driver->name in
snd_soc_dai_name_get() because dai->driver is a pre-defined global
variable. Also update snd_soc_is_matching_dai() for alignment.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/20240304072128.2845432-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-04 20:27:36 +00:00
Richard Fitzgerald
177862317a
ASoC: cs-amp-lib: Add KUnit test for calibration helpers
Add a KUnit test for the cs-amp-lib library. This has test cases
for cs_amp_get_efi_calibration_data() and cs_amp_write_cal_coeffs().

A KUNIT_STATIC_STUB_REDIRECT() has been added to
cs_amp_get_efi_variable() and cs_amp_write_cal_coeff() so that the
KUnit test can redirect these to test harness functions.

Much of the testing involves invoking the same function with different
parameters, i.e. the number of amps and the amp index within the array.
This uses parameterization rather than looping. The idea is to avoid
looping over configurations within one test case as that has a higher
chance of having a bug that doesn't actually test all the expected cases.
Having the test run exactly one configuration, and then tear-down, is less
prone to accidentally skipped configurations.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240304143705.26362-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-04 20:27:35 +00:00
Mark Brown
0f1a277b3d
spi: axi-spi-engine: small cleanups
Merge series from David Lechner <dlechner@baylibre.com>:

This series contains a few small cleanups to the axi-spi-engine driver,
mostly suggested from previous reviews.
2024-03-04 20:23:00 +00:00
Nícolas F. R. A. Prado
d8999d151e
arm64: defconfig: Enable support for cbmem entries in the coreboot table
Enable the cbmem driver and dependencies in order to support reading
cbmem entries from the coreboot table, which are used to store logs from
coreboot on arm64 Chromebooks, and provide useful information for
debugging the boot process on those devices.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240304-coreboot-defconfig-v1-1-02dc1940408f@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-04 21:18:53 +01:00
Laura Nao
5d94da7ff0 kselftest: Add basic test for probing the rust sample modules
Add new basic kselftest that checks if the available rust sample modules
can be added and removed correctly.

Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Sergio Gonzalez Collado <sergio.collado@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-03-04 13:13:04 -07:00
Yang Li
d0464d8287 dm vdo block-map: Remove stray semicolon
Remove the unnecessary semicolon at the end of the for statement.

Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-03-04 15:07:57 -05:00
Mike Snitzer
900d337b46 dm vdo string-utils: change from uds_ to vdo_ namespace
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Chung Chung <cchung@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
2024-03-04 15:07:57 -05:00
Mike Snitzer
3584240b9c dm vdo logger: change from uds_ to vdo_ namespace
Rename all uds_log_* to vdo_log_*.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Chung Chung <cchung@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
2024-03-04 15:07:57 -05:00
Mike Snitzer
66214ed000 dm vdo funnel-queue: change from uds_ to vdo_ namespace
Also return VDO_SUCCESS from vdo_make_funnel_queue.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Chung Chung <cchung@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
2024-03-04 15:07:57 -05:00
Matthew Sakai
41c58a36e2 dm vdo indexer: fix use after free
Fixes: b46d79bdb8 ("dm vdo: add deduplication index storage interface")
Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-03-04 15:07:57 -05:00
Mike Snitzer
7979d90757 dm vdo logger: remove log level to string conversion code
Was only used by sysfs code, can be reinstated if/when needed.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
2024-03-04 15:07:57 -05:00
Ken Raeburn
fd5b92b4ce dm vdo: document log_level parameter
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-03-04 15:07:57 -05:00
Mike Snitzer
25315e967a dm vdo: add 'log_level' module parameter
Expose control over dm-vdo's log-level in terms of a module param. It
can be read and written via /sys/module/dm_vdo/parameters/log_level.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
2024-03-04 15:07:56 -05:00
Mike Snitzer
a9da0fb6d8 dm vdo: remove all sysfs interfaces
Also update target major version number.

All info is (or will be) accessible through alternative interfaces
(e.g. "dmsetup message", module params, etc).

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
2024-03-04 15:07:56 -05:00
Mike Snitzer
4e4152482b dm vdo target: eliminate inappropriate uses of UDS_SUCCESS
Most should be VDO_SUCCESS.  But comparing the return from
kstrtouint() with UDS_SUCCESS (happens to be 0) makes no sense.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
2024-03-04 15:07:56 -05:00
Matthew Sakai
e60167367e dm vdo indexer: update ASSERT and ASSERT_LOG_ONLY usage
Update indexer uses of ASSERT and ASSERT_LOG_ONLY to
VDO_ASSERT and VDO_ASSERT_LOG_ONLY, respectively. Remove
ASSERT and ASSERT_LOG_ONLY. Also rename uds_assertion_failed
to vdo_assertion_failed.

Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-03-04 15:07:56 -05:00
Mike Snitzer
fc03f73760 dm vdo encodings: update some stale comments
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
2024-03-04 15:07:56 -05:00
Mike Snitzer
6a79248b42 dm vdo permassert: audit all of ASSERT to test for VDO_SUCCESS
Also rename ASSERT to VDO_ASSERT and ASSERT_LOG_ONLY to
VDO_ASSERT_LOG_ONLY.

But re-introduce ASSERT and ASSERT_LOG_ONLY as a placeholder
for the benefit of dm-vdo/indexer.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
2024-03-04 15:07:56 -05:00