For 64-bit immediate instruction, 'BPF_IMM | BPF_DW | BPF_LD' and
src_reg=[0-6], the current documentation describes the 64-bit
immediate is constructed by:
imm64 = (next_imm << 32) | imm
But actually imm64 is only used when src_reg=0. For all other
variants (src_reg != 0), 'imm' and 'next_imm' have separate special
encoding requirement and imm64 cannot be easily used to describe
instruction semantics.
This patch clarifies that 64-bit immediate instructions use
two 32-bit immediate values instead of a 64-bit immediate value,
so later describing individual 64-bit immediate instructions
becomes less confusing.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Thaler <dthaler1968@gmail.com>
Link: https://lore.kernel.org/bpf/20240127194629.737589-1-yonghong.song@linux.dev
Many devices with a single alternate setting do not have a Valid
Alternate Setting Control and validation performed by
validate_sample_rate_table_v2v3() doesn't work on them and is not
really needed. So check the presense of control before sending
altsetting validation requests.
MOTU Microbook IIc is suffering the most without this check. It
takes up to 40 seconds to bootup due to how slow it switches
sampling rates:
[ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60
[ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2659.164829] usb 3-2: Product: MicroBook IIc
[ 2659.164830] usb 3-2: Manufacturer: MOTU
[ 2659.166204] usb 3-2: Found last interface = 3
[ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug
[ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3
[ 2679.322321] usb 3-2: Creating new data endpoint #3
[ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1
[ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110
[ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug
[ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84
[ 2694.444721] usb 3-2: Creating new data endpoint #84
[ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It seems that the field "mod" in struct bpf_trampoline is not used
anywhere after the commit 31bf1dbccf ("bpf: Fix attaching
fentry/fexit/fmod_ret/lsm to modules"). So we can just remove it now.
Fixes: 31bf1dbccf ("bpf: Fix attaching fentry/fexit/fmod_ret/lsm to modules")
Signed-off-by: Menglong Dong <dongmenglong.8@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240128055443.413291-1-dongmenglong.8@bytedance.com
Optimize bswap instructions by rev8 Zbb instruction conbined with srli
instruction. And Optimize 16-bit zero-extension with Zbb support.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-7-pulehui@huaweicloud.com
Add 8-bit and 16-bit sign-extention wraper with Zbb support to optimize
sign-extension mov instructions.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-6-pulehui@huaweicloud.com
There are many extension helpers in the current branch instructions, and
the implementation is a bit complicated. We simplify this logic through
two simple extension helpers with alternate register.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-4-pulehui@huaweicloud.com
For code unification, add emit_zextw wrapper to unify all the 32-bit
zero-extension operations.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-3-pulehui@huaweicloud.com
For code unification, add emit_sextw wrapper to unify all the 32-bit
sign-extension operations.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-2-pulehui@huaweicloud.com
The ctrl->state value is updated in another thread using WRITE_ONCE, so
ensure all the readers use the appropriate accessor.
Reviewed-by: Sagi Grimberg <sagi@grmberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This reverts commit cca974daeb.
The added sanity check is incorrect. BUDMIN is not the wrong value and
is too small.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Same patch as previous one, but for ebtables.
To build a kernel that only supports ebtables-nft, the builtin tables
need to be disabled, i.e.:
CONFIG_BRIDGE_EBT_BROUTE=n
CONFIG_BRIDGE_EBT_T_FILTER=n
CONFIG_BRIDGE_EBT_T_NAT=n
The ebtables specific extensions can then be used nftables'
NFT_COMPAT interface.
Signed-off-by: Florian Westphal <fw@strlen.de>
Add hidden IP(6)_NF_IPTABLES_LEGACY symbol.
When any of the "old" builtin tables are enabled the "old" iptables
interface will be supported.
To disable the old set/getsockopt interface the existing options
for the builtin tables need to be turned off:
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER is not set
CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE is not set
CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_SECURITY is not set
Same for CONFIG_IP6_NF_ variants.
This allows to build a kernel that only supports ip(6)tables-nft
(iptables-over-nftables api).
In the future the _LEGACY symbol will become visible and the select
statements will be turned into 'depends on', but for now be on safe side
so "make oldconfig" won't break things.
Signed-off-by: Florian Westphal <fw@strlen.de>
Allows to build kernel that supports the arptables mangle target
via nftables' compat infra but without the arptables get/setsockopt
interface or the old arptables filter interpreter.
IOW, setting IP_NF_ARPFILTER=n will break arptables-legacy, but
arptables-nft will continue to work as long as nftables compat
support is enabled.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Acked-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
No need to refetch the flag from the netlink attribute, pass the
existing flags variable which already provide validated flags.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Allow a new process to take ownership of a previously owned table,
useful mostly for firewall management services restarting or suspending
when idle.
By extending __NFT_TABLE_F_UPDATE, the on/off/on check in
nf_tables_updtable() also covers table adoption, although it is actually
not needed: Table adoption is irreversible because nf_tables_updtable()
rejects attempts to drop NFT_TABLE_F_OWNER so table->nlpid setting can
happen just once within the transaction.
If the transaction commences, table's nlpid and flags fields are already
set and no further action is required. If it aborts, the table returns
to orphaned state.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
This companion flag to NFT_TABLE_F_OWNER requests the kernel to keep the
table around after the process has exited. It marks such table as
orphaned (by dropping OWNER flag but keeping PERSIST flag in place),
which opens it for other processes to manipulate. For the sake of
simplicity, PERSIST flag may not be altered though.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Add at least this one-liner describing the obvious.
Fixes: 6001a930ce ("netfilter: nftables: introduce table ownership")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
We had to add another synchronize_rcu() in recent fix.
Bite the bullet and add an rcu_head to netdev_name_node,
free from RCU.
Note that name_node does not hold any reference on dev
to which it points, but there must be a synchronize_rcu()
on device removal path, so we should be fine.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current behavior of thermal_zone_trip_update() in the bang-bang
thermal governor may be problematic for trip points with 0 hysteresis,
because when the zone temperature reaches the trip temperature and
stays there, it will then cause the cooling device go "on" and "off"
alternately, which is not desirable.
Address this by requiring the zone temperature to actually fall below
trip->temperature - trip->hysteresis for the cooling device to go off.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The computation in the fair share governor's get_trip_level() function
currently works under the assumption that the temperature ordering of
trips[] in a thermal zone is ascending, which need not be the case.
However, get_trip_level() can be made work regardless of whether or not
the trips table is ordered by temperature in any way, so change it
accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit 5f38ac54e6.
This causes issues with rebooting and the 7800XT.
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: stable@vger.kernel.org
Fixes: 5f38ac54e6 ("drm/amd/pm: fix the high voltage and temperature issue")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3062
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix netfs_unbuffered_write_iter() to return immediately if
generic_write_checks() returns 0, indicating there's nothing to write.
Note that netfs_file_write_iter() already does this.
Also, whilst we're at it, put in checks for the size being zero before we
even take the locks. Note that generic_write_checks() can still reduce the
size to zero, so we still need that check.
Without this, a warning similar to the following is logged to dmesg:
netfs: Zero-sized write [R=1b6da]
and the syscall fails with EIO, e.g.:
/sbin/ldconfig.real: Writing of cache extension data failed: Input/output error
This can be reproduced on 9p by:
xfs_io -f -c 'pwrite 0 0' /xfstest.test/foo
Fixes: 153a9961b5 ("netfs: Implement unbuffered/DIO write support")
Reported-by: Eric Van Hensbergen <ericvh@kernel.org>
Link: https://lore.kernel.org/r/ZbQUU6QKmIftKsmo@FV7GG9FTHL/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240129094924.1221977-3-dhowells@redhat.com
Tested-by: Dominique Martinet <asmadeus@codewreck.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: <v9fs@lists.linux.dev>
cc: <linux_oss@crudebyte.com>
cc: <netfs@lists.linux.dev>
cc: <linux-fsdevel@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
If netfs_begin_read gets a NETFS_DIO_READ request that begins
past i_size, it won't perform any i/o and just return 0. This
will leak an increment to i_dio_count that is done at the top
of the function.
This can cause subsequent buffered read requests to block
indefinitely, waiting for a non existing dio operation to complete.
Add a inode_dio_end() for the NETFS_DIO_READ case, before returning.
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240129094924.1221977-2-dhowells@redhat.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: <linux-afs@lists.infradead.org>
cc: <netfs@lists.linux.dev>
cc: <linux-fsdevel@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The White Hawk Single board is a single-board integration of the Renesas
White Hawk CPU and Breakout board stack, based on the R-Car V4H ES2.0
(R8A779G2) SoC.
For now, the only visible differences compared to the board stack are:
- The SoC is an updated version of R-Car V4H (R8A779G0),
- The serial console uses an FT2232H instead of a CP2102 USB-UART
bridge, with CTS/RTS wired.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/2b8d37949c17cca170c1d9e97f10a100b20c5cd9.1706192990.git.geert+renesas@glider.be
The White Hawk CSI/DSI and RAVB/Ethernet(1000Base-T1) sub boards are not
specific to R-Car V4H.
Hence rename their DTS file names to drop the "r8a779g0-" prefix, and
remove any references to R-Car V4H.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f89613d0df04cfa6196f8797fe655cf7cec812de.1706192990.git.geert+renesas@glider.be
Schematics say that all these 3.3v sources are driven by "D3.3V".
We have a regulator for it already in ulcb.dtsi. Use it instead.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240117131807.24997-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the compatible values for the Renesas R-Car V4H ES2.0
(R8A779G2) SoC and the Renesas White Hawk Single board.
The former is an updated version of R-Car V4H (R8A779G0).
The latter is a single-board integration of the Renesas White Hawk CPU
and Breakout board stack.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/a44d990c962c8e0aac3b133eaa563f8c92b2ce29.1706192990.git.geert+renesas@glider.be
The TRF7970A is a SPI device, not I2C.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RENESAS FemtoClock3 Wireless is a high-performance jitter attenuator,
frequency translator, and clock synthesizer. The device is comprised of 3
digital PLLs (DPLL) to track CLKIN inputs and three independent low phase
noise fractional output dividers (FOD) that output low phase noise clocks.
FemtoClock3 supports one Time Synchronization (Time Sync) channel to enable
an external processor to control the phase and frequency of the Time Sync
channel and to take phase measurements using the TDC. Intended applications
are synchronization using the precision time protocol (PTP) and
synchronization with 0.5 Hz and 1 Hz signals from GNSS.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change is for the PHC devices that can measure the phase offset
between PHC signal and the external signal, such as the 1PPS signal of
GNSS. Reporting PTP_CLOCK_EXTOFF to user space will be piggy-backed to
the existing ptp_extts_event so that application such as ts2phc can
poll the external offset the same way as extts. Hence, ts2phc can use
the offset to achieve the alignment between PHC and the external signal
by the help of either SW or HW filters.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Breno Leitao says:
====================
Fix MODULE_DESCRIPTION() for net (p3)
There are hundreds of network modules that misses MODULE_DESCRIPTION(),
causing a warning when compiling with W=1. Example:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com90io.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/arc-rimi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com20020.o
This part3 of the patchset focus on the missing ethernet drivers, which
is now warning free. This also fixes net/pcs and ieee802154.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to arcnet module.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to ieee802154 modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Lynx, XPCS and LynxI PCS drivers.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Beckhoff CX5020 EtherCAT Ethernet driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the TI CPSW switch module.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>