Commit graph

1,296,507 commits

Author SHA1 Message Date
Rahul Rameshbabu
3876638b2c net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context
Indirection (*) is of lower precedence than postfix increment (++). Logic
in napi_poll context would cause an out-of-bound read by first increment
the pointer address by byte address space and then dereference the value.
Rather, the intended logic was to dereference first and then increment the
underlying value.

Fixes: 92214be597 ("net/mlx5e: Update doorbell for port timestamping CQ before the software counter")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24 00:15:33 -08:00
Tariq Toukan
cfbc3608a8 net/mlx5: Fix query of sd_group field
The sd_group field moved in the HW spec from the MPIR register
to the vport context.
Align the query accordingly.

Fixes: f5e9563299 ("net/mlx5: Expose Management PCIe Index Register (MPIR)")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24 00:15:33 -08:00
Saeed Mahameed
25461ce8b3 net/mlx5e: Use the correct lag ports number when creating TISes
The cited commit moved the code of mlx5e_create_tises() and changed the
loop to create TISes over MLX5_MAX_PORTS constant value, instead of
getting the correct lag ports supported by the device, which can cause
FW errors on devices with less than MLX5_MAX_PORTS ports.

Change that back to mlx5e_get_num_lag_ports(mdev).

Also IPoIB interfaces create there own TISes, they don't use the eth
TISes, pass a flag to indicate that.

This fixes the following errors that might appear in kernel log:
mlx5_cmd_out_err:808:(pid 650): CREATE_TIS(0x912) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x595b5d), err(-22)
mlx5e_create_mdev_resources:174:(pid 650): alloc tises failed, -22

Fixes: b25bd37c85 ("net/mlx5: Move TISes from priv to mdev HW resources")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24 00:15:32 -08:00
Conrad Kostecki
0077a504e1 ahci: asm1166: correct count of reported ports
The ASM1166 SATA host controller always reports wrongly,
that it has 32 ports. But in reality, it only has six ports.

This seems to be a hardware issue, as all tested ASM1166
SATA host controllers reports such high count of ports.

Example output: ahci 0000:09:00.0: AHCI 0001.0301
32 slots 32 ports 6 Gbps 0xffffff3f impl SATA mode.

By adjusting the port_map, the count is limited to six ports.

New output: ahci 0000:09:00.0: AHCI 0001.0301
32 slots 32 ports 6 Gbps 0x3f impl SATA mode.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=211873
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218346
Signed-off-by: Conrad Kostecki <conikost@gentoo.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-01-24 08:53:55 +01:00
Horatiu Vultur
4e4a1183f2 phy: lan966x: Add missing serdes mux entry
According to the datasheet(Table 3-2: Port configuration) the serdes 2
(SD2) can be configured to run QSGMII or SGMII mode. Already the QSGMII
mode is supported in the serdes_muxes list  but was missing the SGMII mode.
In this mode the serdes is connected to the port 4.
Therefore add this entry in the list.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240108205140.1701770-1-horatiu.vultur@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24 11:24:29 +05:30
Josua Mayer
f7c6249d76 phy: armada-38x: add mux value for gbe port 0 on serdes 0
Armada 38x supports 3 functions on serdes #0:
- pcie port 0
- sata port 0
- gbe port 0

Add missing entry for gbe port 0 on serdes 0 to the gbe_mux array.

Because this array looks obscure to new readers, also add a comment
explaining the meaning of rows, columns and values.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20240106-fix-a38x-comphy-sd0-gbe0-v1-1-c7fd87272050@solid-run.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24 11:23:12 +05:30
Yoshihiro Shimoda
249abaf3bf phy: renesas: rcar-gen3-usb2: Fix returning wrong error code
Even if device_create_file() returns error code,
rcar_gen3_phy_usb2_probe() will return zero because the "ret" is
variable shadowing.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202312161021.gOLDl48K-lkp@intel.com/
Fixes: 441a681b88 ("phy: rcar-gen3-usb2: fix implementation for runtime PM")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240105093703.3359949-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24 11:22:20 +05:30
Abel Vesa
606060ce8f phy: qcom-qmp-pcie: Add support for X1E80100 g3x2 and g4x2 PCIE
Add the X1E80100 G3 and G4 configurations.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231223-x1e80100-phy-pcie-v2-3-223c0556908a@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24 11:20:14 +05:30
Abel Vesa
70e0af37e8 phy: qcom: qmp-pcie: Add QMP v6 registers layout
For consistency, add the QMP v6 registers layout even though
they are the same as v5. Also switch all QMP v6 PHYs to use this
new layout.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231223-x1e80100-phy-pcie-v2-2-223c0556908a@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24 11:20:14 +05:30
Abel Vesa
e94b29f2bd dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHYs
Document the QMP PCIe PHYs on the X1E80100 platform.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231223-x1e80100-phy-pcie-v2-1-223c0556908a@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24 11:20:14 +05:30
Mantas Pucka
62a5df451a phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018
Commit 23fd679249 ("phy: qcom-qmp: add USB3 PHY support for IPQ6018")
noted that IPQ6018 init is identical to IPQ8074. Yet downstream uses
separate serdes init sequence for IPQ6018. Since already existing IPQ9574
serdes init sequence is identical, just reuse it and fix failing USB3 mode
in IPQ6018.

Fixes: 23fd679249 ("phy: qcom-qmp: add USB3 PHY support for IPQ6018")
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1706026160-17520-3-git-send-email-mantas@8devices.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24 11:11:52 +05:30
Mantas Pucka
f74c35b630 phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018
Commit 2be22aae6b ("phy: qcom-qmp-usb: populate offsets configuration")
introduced register offsets to the driver but for ipq8074/ipq6018 they do
not match what was in the old style device tree. Example from old
ipq6018.dtsi:

<0x00078200 0x130>,     /* Tx */
<0x00078400 0x200>,     /* Rx */
<0x00078800 0x1f8>,     /* PCS */
<0x00078600 0x044>;     /* PCS misc */

which would translate to:
{.., .pcs = 0x800, .pcs_misc = 0x600, .tx = 0x200, .rx = 0x400 }

but was translated to:
{.., .pcs = 0x600, .tx = 0x200, .rx = 0x400 }

So split usb_offsets and fix USB initialization for IPQ8074 and IPQ6018.
Tested only on IPQ6018

Fixes: 2be22aae6b ("phy: qcom-qmp-usb: populate offsets configuration")
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1706026160-17520-2-git-send-email-mantas@8devices.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24 11:11:52 +05:30
Lucas De Marchi
ab5ae65fb2 drm/xe: Remove PVC from xe_wa kunit tests
Since the PCI IDs for PVC weren't added to the xe driver, the xe_wa
tests should not try to create a fake PVC device since they can't find
the right PCI ID. Fix bugs when running kunit:

	# xe_wa_gt: ASSERTION FAILED at drivers/gpu/drm/xe/tests/xe_wa_test.c:111
	Expected ret == 0, but
	    ret == -19 (0xffffffffffffffed)
	[FAILED] PVC (B0)
	# xe_wa_gt: ASSERTION FAILED at drivers/gpu/drm/xe/tests/xe_wa_test.c:111
	Expected ret == 0, but
	    ret == -19 (0xffffffffffffffed)
	[FAILED] PVC (B1)
	# xe_wa_gt: ASSERTION FAILED at drivers/gpu/drm/xe/tests/xe_wa_test.c:111
	Expected ret == 0, but
	    ret == -19 (0xffffffffffffffed)
	[FAILED] PVC (C0)

Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240123031242.3548724-1-lucas.demarchi@intel.com
2024-01-23 21:04:04 -08:00
Dima Tisnek
d47b9f68d2 libbpf: Correct bpf_core_read.h comment wrt bpf_core_relo struct
Past commit ([0]) removed the last vestiges of struct bpf_field_reloc,
it's called struct bpf_core_relo now.

  [0] 28b93c6449 ("libbpf: Clean up and improve CO-RE reloc logging")

Signed-off-by: Dima Tisnek <dimaqq@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240121060126.15650-1-dimaqq@gmail.com
2024-01-23 20:29:57 -08:00
Andrii Nakryiko
32749605e3 Merge branch 'skip-callback-tests-if-jit-is-disabled-in-test_verifier'
Tiezhu Yang says:

====================
Skip callback tests if jit is disabled in test_verifier

Thanks very much for the feedbacks from Eduard, John, Jiri, Daniel,
Hou Tao, Song Liu and Andrii.

v7:
  -- Add an explicit flag F_NEEDS_JIT_ENABLED for checking,
     thanks Andrii.

v6:
  -- Copy insn_is_pseudo_func() into testing_helpers,
     thanks Andrii.

v5:
  -- Reuse is_ldimm64_insn() and insn_is_pseudo_func(),
     thanks Song Liu.

v4:
  -- Move the not-allowed-checking into "if (expected_ret ...)"
     block, thanks Hou Tao.
  -- Do some small changes to avoid checkpatch warning
     about "line length exceeds 100 columns".

v3:
  -- Rebase on the latest bpf-next tree.
  -- Address the review comments by Hou Tao,
     remove the second argument "0" of open(),
     check only once whether jit is disabled,
     check fd_prog, saved_errno and jit_disabled to skip.
====================

Link: https://lore.kernel.org/r/20240123090351.2207-1-yangtiezhu@loongson.cn
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2024-01-23 20:28:06 -08:00
Tiezhu Yang
0b50478fd8 selftests/bpf: Skip callback tests if jit is disabled in test_verifier
If CONFIG_BPF_JIT_ALWAYS_ON is not set and bpf_jit_enable is 0, there
exist 6 failed tests.

  [root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable
  [root@linux bpf]# echo 0 > /proc/sys/kernel/unprivileged_bpf_disabled
  [root@linux bpf]# ./test_verifier | grep FAIL
  #106/p inline simple bpf_loop call FAIL
  #107/p don't inline bpf_loop call, flags non-zero FAIL
  #108/p don't inline bpf_loop call, callback non-constant FAIL
  #109/p bpf_loop_inline and a dead func FAIL
  #110/p bpf_loop_inline stack locations for loop vars FAIL
  #111/p inline bpf_loop call in a big program FAIL
  Summary: 768 PASSED, 15 SKIPPED, 6 FAILED

The test log shows that callbacks are not allowed in non-JITed programs,
interpreter doesn't support them yet, thus these tests should be skipped
if jit is disabled.

Add an explicit flag F_NEEDS_JIT_ENABLED to those tests to mark that they
require JIT enabled in bpf_loop_inline.c, check the flag and jit_disabled
at the beginning of do_test_single() to handle this case.

With this patch:

  [root@linux bpf]# echo 0 > /proc/sys/net/core/bpf_jit_enable
  [root@linux bpf]# echo 0 > /proc/sys/kernel/unprivileged_bpf_disabled
  [root@linux bpf]# ./test_verifier | grep FAIL
  Summary: 768 PASSED, 21 SKIPPED, 0 FAILED

Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240123090351.2207-3-yangtiezhu@loongson.cn
2024-01-23 20:27:41 -08:00
Tiezhu Yang
15b4f88dcc selftests/bpf: Move is_jit_enabled() into testing_helpers
Currently, is_jit_enabled() is only used in test_progs, move it into
testing_helpers so that it can be used in test_verifier. While at it,
remove the second argument "0" of open() as Hou Tao suggested.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20240123090351.2207-2-yangtiezhu@loongson.cn
2024-01-23 20:26:17 -08:00
Jiapeng Chong
f1aa643773 scsi: fnic: Clean up some inconsistent indenting
No functional modification involved.

drivers/scsi/fnic/fnic_scsi.c:1964 fnic_abort_cmd() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7930
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240118020128.24432-1-jiapeng.chong@linux.alibaba.com
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:47:44 -05:00
Guixin Liu
29b75184f7 scsi: mpi3mr: Use ida to manage mrioc ID
To ensure that the same ID is not obtained during concurrent execution of
the probe, an ida is used to manage the mrioc's ID.

Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231229040331.52518-1-kanie@linux.alibaba.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:45:59 -05:00
Justin Stitt
165470fb26 scsi: ibmvscsi_tgt: Replace deprecated strncpy() with strscpy()
strncpy() is deprecated for use on NUL-terminated destination strings [1]
and as such we should prefer more robust and less ambiguous string
interfaces.

We don't need the NUL-padding behavior that strncpy() provides as vscsi is
NUL-allocated in ibmvscsis_probe() which proceeds to call
ibmvscsis_adapter_info():

|       vscsi = kzalloc(sizeof(*vscsi), GFP_KERNEL);

ibmvscsis_probe() -> ibmvscsis_handle_crq() -> ibmvscsis_parse_command()
-> ibmvscsis_mad() -> ibmvscsis_process_mad() -> ibmvscsis_adapter_info()

Following the same idea, `partition_name` is defiend as:

|       static char partition_name[PARTITION_NAMELEN] = "UNKNOWN";
... which is NUL-padded already, meaning strscpy() is the best option.

Considering the above, a suitable replacement is strscpy() [2] due to the
fact that it guarantees NUL-termination on the destination buffer without
unnecessarily NUL-padding.

However, for cap->name and info let's use strscpy_pad() as they are
allocated via dma_alloc_coherent():

|       cap = dma_alloc_coherent(&vscsi->dma_dev->dev, olen, &token,
|                                GFP_ATOMIC);
&
|       info = dma_alloc_coherent(&vscsi->dma_dev->dev, sizeof(*info), &token,
|                                 GFP_ATOMIC);

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231212-strncpy-drivers-scsi-ibmvscsi_tgt-ibmvscsi_tgt-c-v2-1-bdb9a7cd96c8@google.com
Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:41:28 -05:00
Colin Ian King
be7fc734b6 scsi: message: fusion: Remove redundant pointer 'hd'
The pointer 'hd' is being assigned a value that is not being read
later. The variable is redundant and can be removed.

Cleans up clang scan build warning:

warning: Although the value stored to 'hd' is used in the enclosing
expression, the value is never actually read from 'hd'
[deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240118122039.2541425-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:39:21 -05:00
Colin Ian King
9759cdc1bc scsi: megaraid: Remove redundant assignment to variable 'retval'
The variable 'retval' is being assigned a value that is not being read
afterwards. The assignment is redundant and can be removed.

Cleans up clang scan warning:

Although the value stored to 'retval' is used in the enclosing
expression, the value is never actually read from 'retval'
[deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240118121441.2533620-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:38:18 -05:00
ChanWoo Lee
01f256228c scsi: ufs: mcq: Remove unused parameters
The 'hwq' parameter is not used in this function. Remove unused parameters.

Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240105021041.20400-3-cw9316.lee@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:35:33 -05:00
ChanWoo Lee
325ec4ac7d scsi: ufs: mcq: Use ufshcd_mcq_req_to_hwq() to simplify updating hwq
Use ufshcd_mcq_req_to_hwq() to remove unnecessary variables and simplify.

Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240105021041.20400-2-cw9316.lee@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:35:33 -05:00
ChanWoo Lee
ab3e6c4e0e scsi: ufs: mcq: Add definition for REG_UFS_MEM_CFG register
Instead of hardcoding the register field, add the proper definition. While
at it, let's also use ufshcd_rmwl() to simplify updating this register.

Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240102014222.23351-1-cw9316.lee@samsung.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:33:28 -05:00
Michael Kelley
f4469f3858 scsi: storvsc: Fix ring buffer size calculation
Current code uses the specified ring buffer size (either the default of 128
Kbytes or a module parameter specified value) to encompass the one page
ring buffer header plus the actual ring itself.  When the page size is 4K,
carving off one page for the header isn't significant.  But when the page
size is 64K on ARM64, only half of the default 128 Kbytes is left for the
actual ring.  While this doesn't break anything, the smaller ring size
could be a performance bottleneck.

Fix this by applying the VMBUS_RING_SIZE macro to the specified ring buffer
size.  This macro adds a page for the header, and rounds up the size to a
page boundary, using the page size for which the kernel is built.  Use this
new size for subsequent ring buffer calculations.  For example, on ARM64
with 64K page size and the default ring size, this results in the actual
ring being 128 Kbytes, which is intended.

Cc: stable@vger.kernel.org # 5.15.x
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240122170956.496436-1-mhklinux@outlook.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:27:28 -05:00
Shyam Prasad N
993d1c346b cifs: fix stray unlock in cifs_chan_skip_or_disable
A recent change moved the code that decides to skip
a channel or disable multichannel entirely, into a
helper function.

During this, a mutex_unlock of the session_mutex
should have been removed. Doing that here.

Fixes: f591062bdb ("cifs: handle servers that still advertise multichannel after disabling")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2024-01-23 20:23:29 -06:00
Shyam Prasad N
4cdad80261 cifs: set replay flag for retries of write command
Similar to the rest of the commands, this is a change
to add replay flags on retry. This one does not add a
back-off, considering that we may want to flush a write
ASAP to the server. Considering that this will be a
flush of cached pages, the retrans value is also not
honoured.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2024-01-23 20:23:29 -06:00
Shyam Prasad N
4f1fffa237 cifs: commands that are retried should have replay flag set
MS-SMB2 states that the header flag SMB2_FLAGS_REPLAY_OPERATION
needs to be set when a command needs to be retried, so that
the server is aware that this is a replay for an operation that
appeared before.

This can be very important, for example, for state changing
operations and opens which get retried following a reconnect;
since the client maybe unaware of the status of the previous
open.

This is particularly important for multichannel scenario, since
disconnection of one connection does not mean that the session
is lost. The requests can be replayed on another channel.

This change also makes use of exponential back-off before replays
and also limits the number of retries to "retrans" mount option
value.

Also, this change does not modify the read/write codepath.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2024-01-23 20:23:29 -06:00
Shyam Prasad N
64cc377b76 cifs: helper function to check replayable error codes
The code to check for replay is not just -EAGAIN. In some
cases, the send request or receive response may result in
network errors, which we're now mapping to -ECONNABORTED.

This change introduces a helper function which checks
if the error returned in one of the above two errors.
And all checks for replays will now use this helper.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2024-01-23 20:23:28 -06:00
Shyam Prasad N
a68106a692 cifs: translate network errors on send to -ECONNABORTED
When the network stack returns various errors, we today bubble
up the error to the user (in case of soft mounts).

This change translates all network errors except -EINTR and
-EAGAIN to -ECONNABORTED. A similar approach is taken when
we receive network errors when reading from the socket.

The change also forces the cifsd thread to reconnect during
it's next activity.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2024-01-23 20:23:28 -06:00
Ming Lei
4373534a98 scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler
Inside scsi_eh_wakeup(), scsi_host_busy() is called & checked with host
lock every time for deciding if error handler kthread needs to be waken up.

This can be too heavy in case of recovery, such as:

 - N hardware queues

 - queue depth is M for each hardware queue

 - each scsi_host_busy() iterates over (N * M) tag/requests

If recovery is triggered in case that all requests are in-flight, each
scsi_eh_wakeup() is strictly serialized, when scsi_eh_wakeup() is called
for the last in-flight request, scsi_host_busy() has been run for (N * M -
1) times, and request has been iterated for (N*M - 1) * (N * M) times.

If both N and M are big enough, hard lockup can be triggered on acquiring
host lock, and it is observed on mpi3mr(128 hw queues, queue depth 8169).

Fix the issue by calling scsi_host_busy() outside the host lock. We don't
need the host lock for getting busy count because host the lock never
covers that.

[mkp: Drop unnecessary 'busy' variables pointed out by Bart]

Cc: Ewan Milne <emilne@redhat.com>
Fixes: 6eb045e092 ("scsi: core: avoid host-wide host_busy counter for scsi_mq")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240112070000.4161982-1-ming.lei@redhat.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Sathya Prakash Veerichetty <safhya.prakash@broadcom.com>
Tested-by: Sathya Prakash Veerichetty <safhya.prakash@broadcom.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:21:51 -05:00
Petr Mladek
796cae1a79 scsi: core: Safe warning about bad dev info string
Both "model" and "strflags" are passed to "%s" even when one or both are
NULL.

It is safe because vsprintf() would detect the NULL pointer and print
"(null)". But it is a kernel-specific feature and compiler warns about it:

<warning>
   In file included from include/linux/kernel.h:19,
                    from arch/x86/include/asm/percpu.h:27,
                    from arch/x86/include/asm/current.h:6,
                    from include/linux/sched.h:12,
                    from include/linux/blkdev.h:5,
                    from drivers/scsi/scsi_devinfo.c:3:
   drivers/scsi/scsi_devinfo.c: In function 'scsi_dev_info_list_add_str':
>> include/linux/printk.h:434:44: warning: '%s' directive argument is null [-Wformat-overflow=]
     434 | #define printk(fmt, ...) printk_index_wrap(_printk, fmt, ##__VA_ARGS__)
         |                                            ^
   include/linux/printk.h:430:3: note: in definition of macro 'printk_index_wrap'
     430 |   _p_func(_fmt, ##__VA_ARGS__);    \
         |   ^~~~~~~
   drivers/scsi/scsi_devinfo.c:551:4: note: in expansion of macro 'printk'
     551 |    printk(KERN_ERR "%s: bad dev info string '%s' '%s'"
         |    ^~~~~~
   drivers/scsi/scsi_devinfo.c:552:14: note: format string is defined here
     552 |           " '%s'\n", __func__, vendor, model,
         |              ^~
</warning>

Do not rely on the kernel specific behavior and print the message a safe
way.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401112002.AOjwMNM0-lkp@intel.com/
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240111162419.12406-1-pmladek@suse.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:14:40 -05:00
Peter Wang
3329738500 scsi: ufs: ufs-mediatek: Change default autosuspend timer
Change default autosuspend timer from 2000 ms to 500 ms for the MediaTek
driver.

Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240109124015.31359-3-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:11:24 -05:00
Peter Wang
4380e64a94 scsi: core: Move autosuspend timer delay to Scsi_Host
The runtime suspend timer delay is a const value in scsi_host_template
which a host driver cannot modify at runtime.  Move the delay to Scsi_Host
to allow a driver to update it.

Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240109124015.31359-2-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:11:23 -05:00
Peter Wang
e0dc13e5a3 scsi: ufs: ufs-mediatek: Disable MCQ IRQ when clock off
Disable MCQ IRQ when clock is off. This is same as legacy mode.

Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231221110416.16176-4-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:06:06 -05:00
Peter Wang
468b3e0a3b scsi: ufs: ufs-mediatek: Fix MCQ mode TM cmd timeout
Fix TM cmd timeout issue in MCQ mode using the default resume call
ufshcd_make_hba_operational() to set TM cmd DMA address.

This flow is the same as UFS initialization after link startup and then
setting MCQ related registers if using MCQ mode.

Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231221110416.16176-3-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:06:06 -05:00
Peter Wang
29b3a373e2 scsi: ufs: ufs-mediatek: Check link status after exiting hibern8
To prevent SSU(Active) error, check link status after exiting hibern8.  If
link is not VS_LINK_UP, return error and do ufshcd_link_recovery.

Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231221110416.16176-2-peter.wang@mediatek.com
Reviewed-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:06:05 -05:00
Maramaina Naresh
0652205b4c scsi: ufs: ufs-mediatek: Migrate to UFSHCD generic CPU latency PM QoS support
The PM QoS feature found in the MediaTek UFS driver was moved to the UFSHCD
core. Hence remove it from MediaTek UFS driver as it is redundant now.

Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Maramaina Naresh <quic_mnaresh@quicinc.com>
Link: https://lore.kernel.org/r/20231219123706.6463-3-quic_mnaresh@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:00:02 -05:00
Maramaina Naresh
2777e73fc1 scsi: ufs: core: Add CPU latency QoS support for UFS driver
Register UFS driver to CPU latency PM QoS framework to improve UFS device
random I/O performance.

PM QoS initialization will insert new QoS request into the CPU latency QoS
list with the maximum latency PM_QOS_DEFAULT_VALUE value.

The UFS driver will vote for performance mode on scale up and power save
mode for scale down.

If clock scaling feature is not enabled then voting will be based on clock
on or off condition. Also provide a sysfs interface to enable/disable PM
QoS feature.

tiotest benchmark tool I/O performance results on sm8550 platform:

1. Without PM QoS support
	Type (Speed in)    | Average of 18 iterations
	Random Write(IPOS) | 41065.13
	Random Read(IPOS)  | 37101.3

2. With PM QoS support
	Type (Speed in)    | Average of 18 iterations
	Random Write(IPOS) | 46784.9
	Random Read(IPOS)  | 42943.4

(Improvement with PM QoS = ~15%).

Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Co-developed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Maramaina Naresh <quic_mnaresh@quicinc.com>
Link: https://lore.kernel.org/r/20231219123706.6463-2-quic_mnaresh@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-01-23 21:00:02 -05:00
Jakub Kicinski
fa47527c71 Merge branch 'gve-alloc-before-freeing-when-changing-config'
Shailend Chand says:

====================
gve: Alloc before freeing when changing config

Functions allocating resources did so directly into priv thus far. The
assumption doing that was that priv was not already holding references
to live resources.

When ring configuration is changed in any way from userspace, thus far
we relied on calling the ndo_stop and ndo_open callbacks in succession.
This meant that we teardown existing resources and rob the OS of
networking before we have successfully allocated resources for the new
config.

Correcting this requires us to perform allocations without editing priv.
That is what the "gve: Switch to config-aware..." patch does: it modifies
all the allocation paths so that they take a new configuration as input
and return references to newly allocated resources without modifying
priv or interfering with live resources in any way.

Having corrected the allocation paths so, the ndo open and close
callbacks are refactored to make available distinct functions for
allocating queue resources and starting or stopping them. This is then
put to use in the set_channels and set_features hooks in the last two
patches.

These changes have been tested by verifying the integrity of a stream of
integers while the driver is continuously reconfigured with ethtool.
====================

Link: https://lore.kernel.org/r/20240122182632.1102721-1-shailend@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 17:41:35 -08:00
Shailend Chand
f3753771e7 gve: Alloc before freeing when changing features
Previously, existing queues were being freed before the resources for
the new queues were being allocated. This would take down the interface
if someone were to attempt to change feature flags under a resource
crunch.

Signed-off-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Link: https://lore.kernel.org/r/20240122182632.1102721-7-shailend@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 17:41:31 -08:00
Shailend Chand
5f08cd3d64 gve: Alloc before freeing when adjusting queues
Previously, existing queues were being freed before the resources for
the new queues were being allocated. This would take down the interface
if someone were to attempt to change queue counts under a resource
crunch.

Signed-off-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Link: https://lore.kernel.org/r/20240122182632.1102721-6-shailend@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 17:41:31 -08:00
Shailend Chand
92a6d7a401 gve: Refactor gve_open and gve_close
gve_open is rewritten to be composed of two funcs: gve_queues_mem_alloc
and gve_queues_start. The former only allocates queue resources without
doing anything to install the queues, which is taken up by the latter.
Similarly gve_close is split into gve_queues_stop and
gve_queues_mem_free.

Separating the acts of queue resource allocation and making the queue
become live help with subsequent changes that aim to not take down the
datapath when applying new configurations.

Signed-off-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Link: https://lore.kernel.org/r/20240122182632.1102721-5-shailend@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 17:41:31 -08:00
Shailend Chand
f13697cc7a gve: Switch to config-aware queue allocation
The new config-aware functions will help achieve the goal of being able
to allocate resources for new queues while there already are active
queues serving traffic.

These new functions work off of arbitrary queue allocation configs
rather than just the currently active config in priv, and they return
the newly allocated resources instead of writing them into priv.

Signed-off-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240122182632.1102721-4-shailend@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 17:41:31 -08:00
Shailend Chand
1dfc2e4611 gve: Refactor napi add and remove functions
This change makes the napi poll functions non-static and moves the
gve_(add|remove)_napi functions to gve_utils.c, to make possible future
"start queue" hooks in the datapath files.

Signed-off-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240122182632.1102721-3-shailend@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 17:41:31 -08:00
Shailend Chand
7cea48b9a4 gve: Define config structs for queue allocation
Queue allocation functions currently can only allocate into priv and
free memory in priv. These new structs would be passed into the queue
functions in a subsequent change to make them capable of returning newly
allocated resources and not just writing them into priv. They also make
it possible to allocate resources for queues with a different config
than that of the currently active queues.

Signed-off-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240122182632.1102721-2-shailend@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 17:41:30 -08:00
Ido Schimmel
32f2a0afa9 net/sched: flower: Fix chain template offload
When a qdisc is deleted from a net device the stack instructs the
underlying driver to remove its flow offload callback from the
associated filter block using the 'FLOW_BLOCK_UNBIND' command. The stack
then continues to replay the removal of the filters in the block for
this driver by iterating over the chains in the block and invoking the
'reoffload' operation of the classifier being used. In turn, the
classifier in its 'reoffload' operation prepares and emits a
'FLOW_CLS_DESTROY' command for each filter.

However, the stack does not do the same for chain templates and the
underlying driver never receives a 'FLOW_CLS_TMPLT_DESTROY' command when
a qdisc is deleted. This results in a memory leak [1] which can be
reproduced using [2].

Fix by introducing a 'tmplt_reoffload' operation and have the stack
invoke it with the appropriate arguments as part of the replay.
Implement the operation in the sole classifier that supports chain
templates (flower) by emitting the 'FLOW_CLS_TMPLT_{CREATE,DESTROY}'
command based on whether a flow offload callback is being bound to a
filter block or being unbound from one.

As far as I can tell, the issue happens since cited commit which
reordered tcf_block_offload_unbind() before tcf_block_flush_all_chains()
in __tcf_block_put(). The order cannot be reversed as the filter block
is expected to be freed after flushing all the chains.

[1]
unreferenced object 0xffff888107e28800 (size 2048):
  comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s)
  hex dump (first 32 bytes):
    b1 a6 7c 11 81 88 ff ff e0 5b b3 10 81 88 ff ff  ..|......[......
    01 00 00 00 00 00 00 00 e0 aa b0 84 ff ff ff ff  ................
  backtrace:
    [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320
    [<ffffffff81ab374e>] __kmalloc+0x4e/0x90
    [<ffffffff832aec6d>] mlxsw_sp_acl_ruleset_get+0x34d/0x7a0
    [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180
    [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280
    [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340
    [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0
    [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170
    [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0
    [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440
    [<ffffffff83ac6270>] netlink_unicast+0x540/0x820
    [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0
    [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80
    [<ffffffff8379d29a>] ___sys_sendmsg+0x13a/0x1e0
    [<ffffffff8379d50c>] __sys_sendmsg+0x11c/0x1f0
    [<ffffffff843b9ce0>] do_syscall_64+0x40/0xe0
unreferenced object 0xffff88816d2c0400 (size 1024):
  comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s)
  hex dump (first 32 bytes):
    40 00 00 00 00 00 00 00 57 f6 38 be 00 00 00 00  @.......W.8.....
    10 04 2c 6d 81 88 ff ff 10 04 2c 6d 81 88 ff ff  ..,m......,m....
  backtrace:
    [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320
    [<ffffffff81ab36c1>] __kmalloc_node+0x51/0x90
    [<ffffffff81a8ed96>] kvmalloc_node+0xa6/0x1f0
    [<ffffffff82827d03>] bucket_table_alloc.isra.0+0x83/0x460
    [<ffffffff82828d2b>] rhashtable_init+0x43b/0x7c0
    [<ffffffff832aed48>] mlxsw_sp_acl_ruleset_get+0x428/0x7a0
    [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180
    [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280
    [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340
    [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0
    [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170
    [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0
    [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440
    [<ffffffff83ac6270>] netlink_unicast+0x540/0x820
    [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0
    [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80

[2]
 # tc qdisc add dev swp1 clsact
 # tc chain add dev swp1 ingress proto ip chain 1 flower dst_ip 0.0.0.0/32
 # tc qdisc del dev swp1 clsact
 # devlink dev reload pci/0000:06:00.0

Fixes: bbf73830cd ("net: sched: traverse chains in block with tcf_get_next_chain()")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-24 01:33:59 +00:00
Jakub Kicinski
04fe7c5029 selftests: fill in some missing configs for net
We are missing a lot of config options from net selftests,
it seems:

tun/tap:     CONFIG_TUN, CONFIG_MACVLAN, CONFIG_MACVTAP
fib_tests:   CONFIG_NET_SCH_FQ_CODEL
l2tp:        CONFIG_L2TP, CONFIG_L2TP_V3, CONFIG_L2TP_IP, CONFIG_L2TP_ETH
sctp-vrf:    CONFIG_INET_DIAG
txtimestamp: CONFIG_NET_CLS_U32
vxlan_mdb:   CONFIG_BRIDGE_VLAN_FILTERING
gre_gso:     CONFIG_NET_IPGRE_DEMUX, CONFIG_IP_GRE, CONFIG_IPV6_GRE
srv6_end_dt*_l3vpn:   CONFIG_IPV6_SEG6_LWTUNNEL
ip_local_port_range:  CONFIG_MPTCP
fib_test:    CONFIG_NET_CLS_BASIC
rtnetlink:   CONFIG_MACSEC, CONFIG_NET_SCH_HTB, CONFIG_XFRM_INTERFACE
             CONFIG_NET_IPGRE, CONFIG_BONDING
fib_nexthops: CONFIG_MPLS, CONFIG_MPLS_ROUTING
vxlan_mdb:   CONFIG_NET_ACT_GACT
tls:         CONFIG_TLS, CONFIG_CRYPTO_CHACHA20POLY1305
psample:     CONFIG_PSAMPLE
fcnal:       CONFIG_TCP_MD5SIG

Try to add them in a semi-alphabetical order.

Fixes: 62199e3f16 ("selftests: net: Add VXLAN MDB test")
Fixes: c12e0d5f26 ("self-tests: introduce self-tests for RPS default mask")
Fixes: 122db5e363 ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE")
Link: https://lore.kernel.org/r/20240122203528.672004-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 17:22:58 -08:00
Breno Leitao
20df28fb5b net/ipv6: resolve warning in ip6_fib.c
In some configurations, the 'iter' variable in function
fib6_repair_tree() is unused, resulting the following warning when
compiled with W=1.

    net/ipv6/ip6_fib.c:1781:6: warning: variable 'iter' set but not used [-Wunused-but-set-variable]
     1781 |         int iter = 0;
	  |             ^

It is unclear what is the advantage of this RT6_TRACE() macro[1], since
users can control pr_debug() in runtime, which is better than at
compilation time. pr_debug() has no overhead when disabled.

Remove the RT6_TRACE() in favor of simple pr_debug() helpers.

[1] Link: https://lore.kernel.org/all/ZZwSEJv2HgI0cD4J@gmail.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240122181955.2391676-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-23 17:22:23 -08:00