The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dtb: pwm@2080000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx53-kp.dtsi includes imx53-tqma53.dtsi which already sets #pwm-cells
to 2. So the two nodes can be dropped without resulting in any changes
in the compiled device tree blobs.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx53-ppd.dtb: pwm@53fb4000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx53-ppd.dtb: pwm@53fb8000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx53-m53evk.dtb: pwm@53fb4000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx51-ts4800.dtb: pwm@73fb4000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
pci_alloc_irq_vectors() allocates an irq vector. When devm_add_action()
fails, the irq vector is not freed, which leads to a memory leak.
Replace the devm_add_action with devm_add_action_or_reset to ensure
the irq vector can be destroyed when it fails.
Fixes: 66637ab137 ("drivers/perf: hisi: add driver for HNS3 PMU")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240425124627.13764-4-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The perf tool allows users to create event groups through following
cmd [1], but the driver does not check whether the array index is out
of bounds when writing data to the event_group array. If the number of
events in an event_group is greater than HNS3_PMU_MAX_HW_EVENTS, the
memory write overflow of event_group array occurs.
Add array index check to fix the possible array out of bounds violation,
and return directly when write new events are written to array bounds.
There are 9 different events in an event_group.
[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}
Fixes: 66637ab137 ("drivers/perf: hisi: add driver for HNS3 PMU")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20240425124627.13764-3-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
The perf tool allows users to create event groups through following
cmd [1], but the driver does not check whether the array index is out of
bounds when writing data to the event_group array. If the number of events
in an event_group is greater than HISI_PCIE_MAX_COUNTERS, the memory write
overflow of event_group array occurs.
Add array index check to fix the possible array out of bounds violation,
and return directly when write new events are written to array bounds.
There are 9 different events in an event_group.
[1] perf stat -e '{pmu/event1/, ... ,pmu/event9/}'
Fixes: 8404b0fbc7 ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240425124627.13764-2-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
There is a 'malloc' call, which can be unsuccessful.
This patch will add the malloc failure checking
to avoid possible null dereference and give more information
about test fail reasons.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240423082102.2018886-1-chentao@kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
For historical reasons we unmask debug exceptions in __cpu_setup(), but
it's not necessary to unmask debug exceptions this early in the
boot/idle entry paths. It would be better to unmask debug exceptions
later in C code as this simplifies the current code and will make it
easier to rework exception masking logic to handle non-DAIF bits in
future (e.g. PSTATE.{ALLINT,PM}).
We started clearing DAIF.D in __cpu_setup() in commit:
2ce39ad151 ("arm64: debug: unmask PSTATE.D earlier")
At the time, we needed to ensure that DAIF.D was clear on the primary
CPU before scheduling and preemption were possible, and chose to do this
in __cpu_setup() so that this occurred in the same place for primary and
secondary CPUs. As we cannot handle debug exceptions this early, we
placed an ISB between initializing MDSCR_EL1 and clearing DAIF.D so that
no exceptions should be triggered.
Subsequently we rewrote the return-from-{idle,suspend} paths to use
__cpu_setup() in commit:
cabe1c81ea ("arm64: Change cpu_resume() to enable mmu early then access sleep_sp by va")
... which allowed for earlier use of the MMU and had the desirable
property of using the same code to reset the CPU in the cold and warm
boot paths. This introduced a bug: DAIF.D was clear while
cpu_do_resume() restored MDSCR_EL1 and other control registers (e.g.
breakpoint/watchpoint control/value registers), and so we could
unexpectedly take debug exceptions.
We fixed that in commit:
744c6c37cc ("arm64: kernel: Fix unmasked debug exceptions when restoring mdscr_el1")
... by having cpu_do_resume() use the `disable_dbg` macro to set DAIF.D
before restoring MDSCR_EL1 and other control registers. This relies on
DAIF.D being subsequently cleared again in cpu_resume().
Subsequently we reworked DAIF masking in commit:
0fbeb31875 ("arm64: explicitly mask all exceptions")
... where we began enforcing a policy that DAIF.D being set implies all
other DAIF bits are set, and so e.g. we cannot take an IRQ while DAIF.D
is set. As part of this the use of `disable_dbg` in cpu_resume() was
replaced with `disable_daif` for consistency with the rest of the
kernel.
These days, there's no need to clear DAIF.D early within __cpu_setup():
* setup_arch() clears DAIF.DA before scheduling and preemption are
possible on the primary CPU, avoiding the problem we we originally
trying to work around.
Note: DAIF.IF get cleared later when interrupts are enabled for the
first time.
* secondary_start_kernel() clears all DAIF bits before scheduling and
preemption are possible on secondary CPUs.
Note: with pseudo-NMI, the PMR is initialized here before any DAIF
bits are cleared. Similar will be necessary for the architectural NMI.
* cpu_suspend() restores all DAIF bits when returning from idle,
ensuring that we don't unexpectedly leave DAIF.D clear or set.
Note: with pseudo-NMI, the PMR is initialized here before DAIF is
cleared. Similar will be necessary for the architectural NMI.
This patch removes the unmasking of debug exceptions from __cpu_setup(),
relying on the above locations to initialize DAIF. This allows some
other cleanups:
* It is no longer necessary for cpu_resume() to explicitly mask debug
(or other) exceptions, as it is always called with all DAIF bits set.
Thus we drop the use of `disable_daif`.
* The `enable_dbg` macro is no longer used, and so is dropped.
* It is no longer necessary to have an ISB immediately after
initializing MDSCR_EL1 in __cpu_setup(), and we can revert to relying
on the context synchronization that occurs when the MMU is enabled
between __cpu_setup() and code which clears DAIF.D
Comments are added to setup_arch() and secondary_start_kernel() to
explain the initial unmasking of the DAIF bits.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240422113523.4070414-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
A comment in the disable_step_tsk macro refers to synchronising with
enable_dbg, as historically the entry used enable_dbg to unmask debug
exceptions after disabling single-stepping.
These days the unmasking happens in entry-common.c via
local_daif_restore() or local_daif_inherit(), so the comment is stale.
This logic is likely to chang in future, so it would be best to avoid
referring to those macros specifically.
Update the comment to take this into account, and describe it in terms
of clearing DAIF.D so that it doesn't macro where this logic lives nor
what it is called.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240422113523.4070414-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Fix left shift overflow issue when the parameter idx is greater than or
equal to 8 in the calculation of perm in PIRx_ELx_PERM macro.
Fix this by modifying the encoding to use a long integer type.
Signed-off-by: Shiqi Liu <shiqiliu@hust.edu.cn>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20240421063328.29710-1-shiqiliu@hust.edu.cn
Signed-off-by: Will Deacon <will@kernel.org>
- Soundness: make internal functions generated by the 'module!' macro
inaccessible, do not implement 'Zeroable' for 'Infallible' and
require 'Send' for the 'Module' trait.
- Build: avoid errors with "empty" files and workaround 'rustdoc' ICE.
- Kconfig: depend on '!CFI_CLANG' and avoid selecting 'CONSTRUCTORS'.
- Code docs: remove non-existing key from 'module!' macro example.
- Docs: trivial rendering fix in arch table.
-----BEGIN PGP SIGNATURE-----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=WaUJ
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.9' of https://github.com/Rust-for-Linux/linux
Pull Rust fixes from Miguel Ojeda:
- Soundness: make internal functions generated by the 'module!' macro
inaccessible, do not implement 'Zeroable' for 'Infallible' and
require 'Send' for the 'Module' trait.
- Build: avoid errors with "empty" files and workaround 'rustdoc' ICE.
- Kconfig: depend on '!CFI_CLANG' and avoid selecting 'CONSTRUCTORS'.
- Code docs: remove non-existing key from 'module!' macro example.
- Docs: trivial rendering fix in arch table.
* tag 'rust-fixes-6.9' of https://github.com/Rust-for-Linux/linux:
rust: remove `params` from `module` macro example
kbuild: rust: force `alloc` extern to allow "empty" Rust files
kbuild: rust: remove unneeded `@rustc_cfg` to avoid ICE
rust: kernel: require `Send` for `Module` implementations
rust: phy: implement `Send` for `Registration`
rust: make mutually exclusive with CFI_CLANG
rust: macros: fix soundness issue in `module!` macro
rust: init: remove impl Zeroable for Infallible
docs: rust: fix improper rendering in Arch Support page
rust: don't select CONSTRUCTORS
* A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
separation.
* A fix to avoid loading rv64/NOMMU kernel past the start of RAM.
* A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
overflow in the bitmask.
* The sud_test kselftest has been fixed to properly swizzle the syscall
number into the return register, which are not the same on RISC-V.
* A fix for a build warning in the perf tools on rv32.
* A fix for the CBO selftests, to avoid non-constants leaking into the
inline asm.
* A pair of fixes for T-Head PBMT errata probing, which has been renamed
MAE by the vendor.
-----BEGIN PGP SIGNATURE-----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=LONm
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
separation
- A fix to avoid loading rv64/NOMMU kernel past the start of RAM
- A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
overflow in the bitmask
- The sud_test kselftest has been fixed to properly swizzle the syscall
number into the return register, which are not the same on RISC-V
- A fix for a build warning in the perf tools on rv32
- A fix for the CBO selftests, to avoid non-constants leaking into the
inline asm
- A pair of fixes for T-Head PBMT errata probing, which has been
renamed MAE by the vendor
* tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2
perf riscv: Fix the warning due to the incompatible type
riscv: T-Head: Test availability bit before enabling MAE errata
riscv: thead: Rename T-Head PBMT to MAE
selftests: sud_test: return correct emulated syscall value on RISC-V
riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
-----BEGIN PGP SIGNATURE-----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=2FY2
-----END PGP SIGNATURE-----
Merge tag '6.9-rc5-cifs-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Three smb3 client fixes, all also for stable:
- two small locking fixes spotted by Coverity
- FILE_ALL_INFO and network_open_info packing fix"
* tag '6.9-rc5-cifs-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix lock ordering potential deadlock in cifs_sync_mid_result
smb3: missing lock when picking channel
smb: client: Fix struct_group() usage in __packed structs
exception in the I2C core for controllers only using target modes,
drop a MAINTAINERS entry, and fix an incorrect DT binding for at24.
-----BEGIN PGP SIGNATURE-----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=BH1X
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Fix a race condition in the at24 eeprom handler, a NULL pointer
exception in the I2C core for controllers only using target modes,
drop a MAINTAINERS entry, and fix an incorrect DT binding for at24"
* tag 'i2c-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: fix NULL function pointer dereference
MAINTAINERS: Drop entry for PCA9541 bus master selector
eeprom: at24: fix memory corruption race condition
dt-bindings: eeprom: at24: Fix ST M24C64-D compatible schema
create_prof_cpu_mask() is no longer used after commit 1f44a22577 ("s390:
convert interrupt handling to use generic hardirq").
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On SM8650 DisplayPort link clocks use frequency tables inherited from
the vendor kernel, it is not applicable in the upstream kernel. Drop
frequency tables and use clk_byte2_ops for those clocks.
This fixes frequency selection in the OPP core (which otherwise attempts
to use invalid 810 KHz as DP link rate), also fixing the following
message:
msm-dp-display af54000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22
Fixes: 9e939f0083 ("clk: qcom: add the SM8650 Display Clock Controller driver")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-4-b44038f3fa96@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On SM8550 DisplayPort link clocks use frequency tables inherited from
the vendor kernel, it is not applicable in the upstream kernel. Drop
frequency tables and use clk_byte2_ops for those clocks.
This fixes frequency selection in the OPP core (which otherwise attempts
to use invalid 810 KHz as DP link rate), also fixing the following
message:
msm-dp-display ae90000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22
Fixes: 90114ca114 ("clk: qcom: add SM8550 DISPCC driver")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-3-b44038f3fa96@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On SM6350 DisplayPort link clocks use frequency tables inherited from
the vendor kernel, it is not applicable in the upstream kernel. Drop
frequency tables and use clk_byte2_ops for those clocks.
This fixes frequency selection in the OPP core (which otherwise attempts
to use invalid 810 KHz as DP link rate), also fixing the following
message:
msm-dp-display ae90000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22
Fixes: 837519775f ("clk: qcom: Add display clock controller driver for SM6350")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-2-b44038f3fa96@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On SM8450 DisplayPort link clocks use frequency tables inherited from
the vendor kernel, it is not applicable in the upstream kernel. Drop
frequency tables and use clk_byte2_ops for those clocks.
This fixes frequency selection in the OPP core (which otherwise attempts
to use invalid 810 KHz as DP link rate), also fixing the following
message:
msm-dp-display ae90000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22
Fixes: 16fb89f92e ("clk: qcom: Add support for Display Clock Controller on SM8450")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-1-b44038f3fa96@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Single AMD driver fix for wake interrupt handling in clockstop mode
-----BEGIN PGP SIGNATURE-----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=wO9T
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Single AMD driver fix for wake interrupt handling in clockstop mode
* tag 'soundwire-6.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: fix for wake interrupt handling for clockstop mode
The register map used for 'cbf_pll' is the same as the one defined for
the CLK_ALPHA_PLL_TYPE_HUAYRA_APSS indice in the 'clk_alpha_pll_regs'
array.
Drop the local register map and use the global one instead to reduce
code duplication.
No functional changes intended. Compile tested only.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-5-eddbf617f0c8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clk_init_data structures are never modified, so add const
qualifier to the ones where it is missing.
No functional changes.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-4-eddbf617f0c8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The match data structures are used only by the apss_ipq_pll_probe()
function and are never modified so mark those as constant.
No functional changes.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-3-eddbf617f0c8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Move the locally defined Huayra register map to 'clk_alpha_pll_regs'
in order to allow using that by other drivers, like the clk-cbf-8996.
No functional changes.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-2-eddbf617f0c8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The register offset array defined locally for the
CLK_ALPHA_PLL_TYPE_STROMER_PLUS is the same as the
entry defined for CLK_ALPHA_PLL_TYPE_STROMER in the
'clk_alpha_pll_regs' array.
To avoid code duplication, remove the local definition
and use the global one instead.
No functional changes.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-1-eddbf617f0c8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Booting v6.8 results in a hang on various IPQ5018 based boards.
Investigating the problem showed that the hang happens when the
clk_alpha_pll_stromer_plus_set_rate() function tries to write
into the PLL_MODE register of the APSS PLL.
Checking the downstream code revealed that it uses [1] stromer
specific operations for IPQ5018, whereas in the current code
the stromer plus specific operations are used.
The ops in the 'ipq_pll_stromer_plus' clock definition can't be
changed since that is needed for IPQ5332, so add a new alpha pll
clock declaration which uses the correct stromer ops and use this
new clock for IPQ5018 to avoid the boot failure.
Also, change pll_type in 'ipq5018_pll_data' to
CLK_ALPHA_PLL_TYPE_STROMER to better reflect that it is a Stromer
PLL and change the apss_ipq_pll_probe() function accordingly.
1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c#L67
Cc: stable@vger.kernel.org
Fixes: 50492f9294 ("clk: qcom: apss-ipq-pll: add support for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Tested-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20240315-apss-ipq-pll-ipq5018-hang-v2-1-6fe30ada2009@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Driver fixes for:
- Revert pl330 issue_pending waits until WFP state due to regression
reported in Bluetooth loading
- Xilinx driver fixes for synchronization, buffer offsets, locking and kdoc
- idxd fixes for spinlock and preventing the migration of the perf
context to an invalid target
- idma driver fix for interrupt handling when powered off
- Tegra driver residual calculation fix
- Owl driver register access fix
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmYsjEcACgkQfBQHDyUj
g0dOXA//QjGv2paJuKSQXwY0Am6ovjYVztYKKJmX42eiRPf2elt3/eRyfwrvnnNx
6bCedPlLjt230VxQ+DQWA+U6XRSEZ55xTqu+NE8Owoqy3WuS7Q7l5p1Lx3nPMg9O
2W0GkJ7q++i4XBnDBPSGQZqOf3sFAaM4fEv2Yq7s4qHUipyGVKUH6IKBBQFIf//q
slw32tL77/pcViYkNLJW6fDgRY8ZnrBNuLPoWpp7DRraYxRjiPk4WAy7mA2/UnzE
kPrPZUxJXlXVBeRcaTEjse3TkRGp6QK4XOW8XQlBIUv9IVsN1WNPQaYcTcrywBwY
18mJt6JNLZVR/31Va/QQfYG6y1mw5Fja9fiLhT9lKqD3iBwLBzxCmrs+NUZgBneg
sJyR/JYxnUR7d8enNfLCUwZDvCiqwHdHXjeakWNg/7gec7OG6WjpWeFd8SEbpxfU
XGaXJTSAFpgHFbLOZvIXWn1nWarpEBBqCNz3dOHN34eCCnh5j+bx5za4k4u/jjSz
9sZjYLO+gn8dqhPNAtIs0wkyEIECoJ8iIhd6sTTkdTKebw8REXbIbey3hY83TTb1
PRuevuoYOBACCs4QS1Gs+8hM5gjU9qw8MVeFk5WuNxY7y2Gxeh+4NmXow/Nerd24
+NoWibWv/pzlnWCPOfHmbEPG8QRljnLa07nXQMkLrbCbKu0DALI=
=Q5fC
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- Revert pl330 issue_pending waits until WFP state due to regression
reported in Bluetooth loading
- Xilinx driver fixes for synchronization, buffer offsets, locking and
kdoc
- idxd fixes for spinlock and preventing the migration of the perf
context to an invalid target
- idma driver fix for interrupt handling when powered off
- Tegra driver residual calculation fix
- Owl driver register access fix
* tag 'dmaengine-fix-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: idxd: Fix oops during rmmod on single-CPU platforms
dmaengine: xilinx: xdma: Clarify kdoc in XDMA driver
dmaengine: xilinx: xdma: Fix synchronization issue
dmaengine: xilinx: xdma: Fix wrong offsets in the buffers addresses in dma descriptor
dma: xilinx_dpdma: Fix locking
dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue
idma64: Don't try to serve interrupts when device is powered off
dmaengine: tegra186: Fix residual calculation
dmaengine: owl: fix register access functions
dmaengine: Revert "dmaengine: pl330: issue_pending waits until WFP state"
Rework nss_port5/6 to use the new multiple configuration implementation
and correctly fix the clocks for these port under some corner case.
This is particularly relevant for device that have 2.5G or 10G port
connected to port5 or port 6 on ipq8074. As the parent are shared
across multiple port it may be required to select the correct
configuration to accomplish the desired clock. Without this patch such
port doesn't work in some specific ethernet speed as the clock will be
set to the wrong frequency as we just select the first configuration for
the related frequency instead of selecting the best one.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20231220221724.3822-4-ansuelsmth@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some RCG frequency can be reached by multiple configuration.
Add clk_rcg2_fm_ops ops to support these special RCG configurations.
These alternative ops will select the frequency using a CEIL policy.
When the correct frequency is found, the correct config is selected by
calculating the final rate (by checking the defined parent and values
in the config that is being checked) and deciding based on the one that
is less different than the requested one.
These check are skipped if there is just one config for the requested
freq.
qcom_find_freq_multi is added to search the freq with the new struct
freq_multi_tbl.
__clk_rcg2_select_conf is used to select the correct conf by simulating
the final clock.
If a conf can't be found due to parent not reachable, a WARN is printed
and -EINVAL is returned.
Tested-by: Wei Lei <quic_leiwei@quicinc.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20231220221724.3822-3-ansuelsmth@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some RCG frequency can be reached by multiple configuration.
We currently declare multiple configuration for the same frequency but
that is not supported and always the first configuration will be taken.
These multiple configuration are needed as based on the current parent
configuration, it may be needed to use a different configuration to
reach the same frequency.
To handle this introduce 3 new macro, C, FM and FMS:
- C is used to declare a freq_conf where src, pre_div, m and n are
provided.
- FM is used to declare a freq_multi_tbl with the frequency and an
array of confs to insert all the config for the provided frequency.
- FMS is used to declare a freq_multi_tbl with the frequency and an
array of a single conf with the provided src, pre_div, m and n.
Struct clk_rcg2 is changed to add a union type to reference a simple
freq_tbl or a complex freq_multi_tbl.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20231220221724.3822-2-ansuelsmth@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- static checker (array size, bounds) fix for marvel driver
- Rockchip rk3588 pcie fixes for bifurcation and mux
- Qualcomm qmp-compbo fix for VCO, register base and regulator name for
m31 driver
- charger det crash fix for ti driver
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmYsiiQACgkQfBQHDyUj
g0fm0Q//bTAGIc5uQvcHOvst9XEEYbeWiXRbrrCPBpoFeimwudfBH102XWuMdrzu
rMpz/vK2oN+vTnpSblyVyCj5eahuuUJRrehAcoUI3/Q39bqW4QbEDU6GLPfXnKto
fqfIL9DZlY0w4fn30trPvcutue/kTHKE6bVvd3q5LfD0dxQEr8YSSF39qQuTY++9
meS9MOXD/3/lMcWE2bp7DS/03XafUPzfXoZTr1wRkuyst9v4lfkpyHrtmg0C3Fgt
cnGT0P+7NOgqwV2jvMEFdA4by0B6Z5rviQQCe9kW7eHaX2bgAZyX2fx0CUG0GGu/
a8aZWQpalXea5cw3jtzBC1zNSDftm8FMZQir0/63VezggueAhNCBI0+tzUigLB9r
x9eSpz+BAhyrfuIeShHlLHIXfB3v55oNv8ZzyLUUoH61UjgrrDTWHBMLDQkZyAHa
8PXA1xaLzugDdEgeV5L/yk0d1fmG189JWiab2C3XU0me2cocBMwP71HwG1MWGoh6
KYvTSaPbKCJcbl+98tunuYL+ms0j42EWtPLfyrcl/L+pYmnfWHEyXLVxH8XXX4rO
UKafPsIQK2EeTAYuzEBDyU05V1PrS+N62Az5vYixf/NuLdtwmxPlFG1vbqMsOR9o
kYR+EB74+KIQY7f1L2khQB7FHyhqlu58IHE1G7p/FrD8EkkMYTI=
=mIag
-----END PGP SIGNATURE-----
Merge tag 'phy-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- static checker (array size, bounds) fix for marvel driver
- Rockchip rk3588 pcie fixes for bifurcation and mux
- Qualcomm qmp-compbo fix for VCO, register base and regulator name for
m31 driver
- charger det crash fix for ti driver
* tag 'phy-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: ti: tusb1210: Resolve charger-det crash if charger psy is unregistered
phy: qcom: qmp-combo: fix VCO div offset on v5_5nm and v6
phy: phy-rockchip-samsung-hdptx: Select CONFIG_RATIONAL
phy: qcom: m31: match requested regulator name with dt schema
phy: qcom: qmp-combo: Fix register base for QSERDES_DP_PHY_MODE
phy: qcom: qmp-combo: Fix VCO div offset on v3
phy: rockchip: naneng-combphy: Fix mux on rk3588
phy: rockchip-snps-pcie3: fix clearing PHP_GRF_PCIESEL_CON bits
phy: rockchip-snps-pcie3: fix bifurcation on rk3588
phy: freescale: imx8m-pcie: fix pcie link-up instability
phy: marvell: a3700-comphy: Fix hardcoded array size
phy: marvell: a3700-comphy: Fix out of bounds read
The RG35XX-H adds thumbsticks, a stereo speaker, and a second USB port to
the RG35XX-Plus, and has a horizontal form factor.
Enabled in this DTS:
- Thumbsticks
- Second USB port
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240427110225.727472-8-ryan@testtoast.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The RG35XX-Plus adds a RTL8221CS SDIO Wifi/BT chip to the RG35XX (2024).
Enabled in this DTS:
- WiFi
- Bluetooth
- Supporting power sequence and GPIOs
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240427110225.727472-7-ryan@testtoast.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The base model RG35XX (2024) is a handheld gaming device based on an
Allwinner H700 chip.
The H700 is a H616 variant (4x ARM Cortex-A53 cores @ 1.5Ghz with Mali G31
GPU) which exposes RGB LCD and NMI pins.
Device features:
- Allwinner H700 @ 1.5GHz
- 1GB LPDDR4 DRAM
- X-Powers AXP717 PMIC
- 3.5" 640x480 RGB LCD
- Two microSD slots
- Mini-HDMI out
- GPIO keypad
- 3.5mm headphone jack
- USB-C charging port
Enabled in this DTS:
- AXP717 PMIC with RSB serial interface, regulators and NMI interrupt
controller
- Power LED (charge LED on device controlled directly by PMIC)
- Serial UART (accessible from headers on the board)
- First SD slot (SD2 appears to have a GPIO-switched regulator for 1.8v
low-voltage signalling, this is not yet modeled. Enablement with a
switched regulator will be confirmed and posted in a follow-up patch).
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240427110225.727472-6-ryan@testtoast.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
RG35XX 2024: Base version with Allwinner H700
RG35XX Plus: Adds Wifi/BT
RG35XX H: Adds second USB port and analog sticks to -Plus in horizontal form factor
Use three separate device descriptions rather than enum as per existing sunxi binding style.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240427110225.727472-4-ryan@testtoast.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Baruch reported an OOPS when using the designware controller as target
only. Target-only modes break the assumption of one transfer function
always being available. Fix this by always checking the pointer in
__i2c_transfer.
Reported-by: Baruch Siach <baruch@tkos.co.il>
Closes: https://lore.kernel.org/r/4269631780e5ba789cf1ae391eec1b959def7d99.1712761976.git.baruch@tkos.co.il
Fixes: 4b1acc4333 ("i2c: core changes for slave support")
[wsa: dropped the simplification in core-smbus to avoid theoretical regressions]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Baruch Siach <baruch@tkos.co.il>
It is possible that mtk_vcodec_enc_pw_on fails, and in that scenario
the PM counter is not incremented, and subsequent call to
mtk_vcodec_enc_pw_off decrements the counter, leading to a PM imbalance.
Fix by bailing out of venc_if_encode in the case when mtk_vcodec_enc_pw_on
fails.
Fixes: 4e855a6efa ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In case of no bandwidth available for DP tunnel, the function get the arguments
@max_up and @max_down set to zero. Fix the kernel-doc to describe more
accurately the purpose of the function.
No functional changes.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Currently in case of no bandwidth available for USB3 tunnel, we are left
with uninitialized variable that can lead to huge negative allocated
bandwidth.
Fix this by initializing the variable to zero. While there, fix the
kernel-doc to describe more accurately the purpose of the function
tb_tunnel_alloc_usb3().
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-usb/6289898b-cd63-4fb8-906a-1b6977321af9@moroto.mountain/
Fixes: 25d905d2b8 ("thunderbolt: Allow USB3 bandwidth to be lower than maximum supported")
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
We can't default to doing parallel tests as there are tests that compete
for the same resources and thus clash, for instance tests that put in
place 'perf probe' probes, that clean the probes without regard to other
tests needs, ARM64 coresight tests, Intel PT ones, etc.
So reintroduce --p/--parallel and make -S/--sequential the default.
We need to come up with infrastructure that state which tests can't run
in parallel because they need exclusive access to some resource,
something as simple as "probes" that would then avoid 'perf probe' tests
from running while other such test is running, or make the tests more
resilient, till then we can't use parallel mode as default.
While at it, document all these options in the 'perf test' man page.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reported-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Ziwm18BqIn_vc1vn@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in this cset:
3c7a8e190b ("uapi: introduce uapi-friendly macros for GENMASK")
That just causes perf to rebuild. Its just some macros going to an uapi
header that we now have to grab a copy into tools/ as well.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/bits.h include/linux/bits.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/lkml/ZiwJsFOBez0MS4r9@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
95a6ccbdc7 ("x86/bhi: Mitigate KVM by default")
ec9404e40e ("x86/bhi: Add BHI mitigation knob")
be482ff950 ("x86/bhi: Enumerate Branch History Injection (BHI) bug")
0f4a837615 ("x86/bhi: Define SPEC_CTRL_BHI_DIS_S")
7390db8aea ("x86/bhi: Add support for clearing branch history at syscall entry")
This causes these perf files to be rebuilt and brings some X86_FEATURE
that will be used when updating the copies of
tools/arch/x86/lib/mem{cpy,set}_64.S with the kernel sources:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/ZirIx4kPtJwGFZS0@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The loop in hists__find_annotations() never set the 'nd' pointer to NULL
and it makes stdio output repeating the last element forever. I think
it doesn't set to NULL for TUI to prevent it from exiting unexpectedly.
But it should just set on stdio mode.
Fixes: d001c7a7f4 ("perf annotate-data: Add hist_entry__annotate_data_tui()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240423020643.740029-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
