Invoke the dump_ip_state function for each ip before
the asic resets and save the register values for
debugging via devcoredump.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to print ip information to be
used to print registers in devcoredump
buffer.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the protoype for print ip state to be used
to print the registers in devcoredump during
a gpu reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding gfx10 gc registers to be used for register
dump via devcoredump during a gpu reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the prototype to dump ip registers
for all ips of different asics and set
them to NULL for now. Based on the
requirement add a function pointer for
each of them.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add interface to reserve bad page.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
return 0 to avoid returning an uninitialized variable r
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Delete fence fallback timer to fix the ramdom
use-after-free issue.
v2: move to amdgpu_mes.c
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This avoids a potential conflict with firmwares with the newer
HDP flush mechanism.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit d76c0a23b5.
This change must be reverted since it caused soft hangs when changing
the refresh rate to 122 & 144Hz when using a 7000 series GPU.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Mark Broadworth <Mark.Broadworth@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses buffer overflow in the smu_v14_0_init_microcode
function. The issue was about the snprintf function writing more bytes
into the fw_name buffer than it can hold.
The line of code is:
snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
Here, snprintf is used to write a formatted string into fw_name. The
format is "amdgpu/%s.bin", where %s is a placeholder for the string
ucode_prefix. The sizeof(fw_name) argument tells snprintf the maximum
number of bytes it can write into fw_name, including the
null-terminating character. In the original code, fw_name is an array of
30 characters.
The string "amdgpu/%s.bin" could be up to 41 bytes long, which exceeds
the 30 bytes allocated for fw_name. This is because %s could be replaced
by ucode_prefix, which can be up to 29 characters long. Adding the 12
characters from "amdgpu/" and ".bin", the total length could be 41
characters.
To address this, the size of ucode_prefix has been reduced to 15
characters. This ensures that the maximum length of the string written into
fw_name does not exceed its capacity.
smu_13/14 etc. don't follow legacy scheme ie., amdgpu_ucode_legacy_naming
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c: In function ‘smu_v14_0_init_microcode’:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:80:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=]
80 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~ ~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu14/smu_v14_0.c:80:9: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 30
80 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s.bin", ucode_prefix);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: fe6cd91524 ("drm/amd/swsmu: add smu14 ip support")
Cc: Li Ma <li.ma@amd.com>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace tmz flag into buffer flag to make it easier to understand
and extend
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To adapt to different gc versions in gfx_v9_4_3.c file.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Here are the corrections needed for the queue ring buffer size
calculation for the following cases:
- Remove the KIQ VM flush ring usage.
- Add the invalidate TLBs packet for gfx10 and gfx11 queue.
- There's no VM flush and PFP sync, so remove the gfx9 real
ring and compute ring buffer usage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do VRAM accounting when doing migrations to vram to make sure
there is enough available VRAM and migrating to VRAM doesn't evict
other possible non-unified memory BOs. If migrating to VRAM fails,
driver can fall back to using system memory seamlessly.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During mode-2 reset, pci config space registers are affected at device
side. However, certain platforms have switches which assign virtual BAR
addresses and returns the same even after device is reset. This
affects pci_restore_state() as it doesn't issue another config write, if
the value read is same as the saved value.
Add a workaround to write saved config space values from driver side.
Presently, these switches are in platforms with SMU v13.0.6 SOCs, hence
restrict the workaround only to those.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
umsch test needs full GPU functionality(e.g., VM update, TLB flush,
possibly buffer moving under memory pressure) which may be not ready
under these states. Just skip it to avoid potential issues.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle the case that the restore worker was already scheduled by another
eviction while the restore was in progress.
Fixes: 9a1c1339ab ("drm/amdkfd: Run restore_workers on freezable WQs")
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I forgot to call tcp_skb_collapse_tstamp() in the
case we consume the second skb in write queue.
Neal suggested to create a common helper used by tcp_mtu_probe()
and tcp_grow_skb().
Fixes: 8ee602c635 ("tcp: try to send bigger TSO packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240425193450.411640-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
post-6.8 issues or aren't considered suitable for backporting.
All except one of these are for MM. I see no particular theme - it's
singletons all over.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZiwPZwAKCRDdBJ7gKXxA
jmcQAPkB6UT/rBUMvFZb1dom9R6SDYl5ZBr20Vj1HvfakCLxmQEAqEd0N7QoWvKS
hKNCMDujiEKqDUWeUaJen4cqXFFE2Qg=
=1wP7
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-04-26-13-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 8 are cc:stable and the remaining 3 (nice ratio!) address
post-6.8 issues or aren't considered suitable for backporting.
All except one of these are for MM. I see no particular theme - it's
singletons all over"
* tag 'mm-hotfixes-stable-2024-04-26-13-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio()
selftests: mm: protection_keys: save/restore nr_hugepages value from launch script
stackdepot: respect __GFP_NOLOCKDEP allocation flag
hugetlb: check for anon_vma prior to folio allocation
mm: zswap: fix shrinker NULL crash with cgroup_disable=memory
mm: turn folio_test_hugetlb into a PageType
mm: support page_mapcount() on page_has_type() pages
mm: create FOLIO_FLAG_FALSE and FOLIO_TYPE_OPS macros
mm/hugetlb: fix missing hugetlb_lock for resv uncharge
selftests: mm: fix unused and uninitialized variable warning
selftests/harness: remove use of LINE_MAX
later also improvements of OTP support in the NAND subsystem. This lead
to situations that we currently cannot handle, so better prevent this
situation from happening in order to avoid canceling device's probe.
In the raw NAND subsystem, two runtime fixes have been shared, one
fixing two important commands in the Qcom driver since it got reworked
and a NULL pointer dereference happening on STB chips.
Arnd also fixed a UBSAN link failure on diskonchip.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmYr9tkACgkQJWrqGEe9
VoTZQQgAr4OXchtvdyr4hyswEKnjJ+cTlmYEd4CYsfq3ECACqsfgqmbWH/Dx8Gol
Yo2vXsucXz1UNxlua/L0LDaI7Hj1GOtY13Tz7QqIsXbp4QHEcAdBDgedmrMdwc6U
ACSGevaamlcvFeVTDpBhHh+tRKNG7xiNGu05t/ECFbJMYHee1VINq6wHLS+Ukdrh
2IDAkRjng4FkpMOnKmCEHiV3ertwq19wqGRr6Hp0MVWSrC7+lwN6KNxaGbEgICCB
KYT161NVG2anft2nZ5wfZlbXZkMmviY2mNHYyzRIBok6RbKlzAjLN8EFO/C5OIKz
pbTdiI6ZfoJqctNXZHLHhmrs8O62SQ==
=1c4F
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"There has been OTP support improvements in the NVMEM subsystem, and
later also improvements of OTP support in the NAND subsystem. This
lead to situations that we currently cannot handle, so better prevent
this situation from happening in order to avoid canceling device's
probe.
In the raw NAND subsystem, two runtime fixes have been shared, one
fixing two important commands in the Qcom driver since it got reworked
and a NULL pointer dereference happening on STB chips.
Arnd also fixed a UBSAN link failure on diskonchip"
* tag 'mtd/fixes-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: limit OTP NVMEM cell parse to non-NAND devices
mtd: diskonchip: work around ubsan link failure
mtd: rawnand: qcom: Fix broken OP_RESET_DEVICE command in qcom_misc_cmd_type_exec()
mtd: rawnand: brcmnand: Fix data access violation for STB chip
Fix extract_user_to_sg() so that it will break out of the loop if
iov_iter_extract_pages() returns 0 rather than looping around forever.
[Note that I've included two fixes lines as the function got moved to a
different file and renamed]
Fixes: 85dd2c8ff3 ("netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator")
Fixes: f5f82cd187 ("Move netfs_extract_iter_to_sg() to lib/scatterlist.c")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Steve French <sfrench@samba.org>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: netfs@lists.linux.dev
Link: https://lore.kernel.org/r/1967121.1714034372@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's required to not free the memory underlying a requested PWM
while a consumer still has a reference to it. While currently a pwm_chip
doesn't live long enough in all cases, linking the struct pwm to the
pwm_chip results in the right lifetime as soon as the pwmchip is living
long enough. This happens with the following commits.
Note this is a breaking change for all pwm drivers that don't use
pwmchip_alloc().
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> # for struct_size() and __counted_by()
Link: https://lore.kernel.org/r/7e9e958841f049026c0023b309cc9deecf0ab61d.1710670958.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
With the upcoming restructuring having all in a single file simplifies
things a bit. The relevant and somewhat visible changes are:
- Some dropped prototypes from include/linux/pwm.h that were only
necessary that core.c has a declaration of the symbols defined in
sysfs.c. The respective functions are static now.
- The pwm class now also exists if CONFIG_SYSFS isn't enabled. Having
CONFIG_SYSFS is not very relevant today, but even without it the
class and device stuff still provides lifetime tracking.
- Both files had an initcall, these are merged into a single one now.
Instead of a big #ifdef block for CONFIG_DEBUG_FS, a single
if (IS_ENABLED(CONFIG_DEBUG_FS)) is used now. This increases compile
coverage a bit and is a tad nicer on the eyes.
Link: https://lore.kernel.org/r/9e2d39a5280d7dda5bfc6682a8aef510148635b2.1710670958.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The code handling the sysfs API uses "child" and "parent" to refer to
the devices corresponding to a struct pwm or a struct pwm_chip
respectively.
Other parts of the pwm core use "parent" to refer to the parent device of
a struct pwm_chip.
So rename "child" to "pwm_dev" and "parent" to "pwmchip_dev" which
better explains the semantic. Also two functions are changed to match
the new names:
child_to_pwm_export() -> pwmexport_from_dev()
child_to_pwm_device() -> pwm_from_dev()
(which have the additional advantage to start with "pwm" which gives the
right scope). Additionally introduce a wrapper for dev_get_drvdata() to
convert a pwmchip_dev to the respective pwm_chip.
Link: https://lore.kernel.org/r/9cc05aceeae2f06ecb850bccb15ba821e768c183.1710670958.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
While the compiler probably optimizes out the pointer dereference, using
the local variable holding the same value also benefits the human
reader. So simplify accordingly. Also move a loop over all capture lines
into the capture if block to group the operations related to capturing
in .probe().
Link: https://lore.kernel.org/r/a7a81f3838f7ed7f4d6dbee3d646989cc265f676.1710068192.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This has the advantage of handling EPROBE_DEFER correctly and being more
compact.
This change also introduces an error message for a few error paths that
lacked an error indicator before. Also sti_pwm_probe_dt() is renamed to
sti_pwm_probe_regmap() to better fit what it actually does.
Link: https://lore.kernel.org/r/8e540733ab882f2b8873712faf85c4f0cb48133a.1710068192.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Instead of of_clk_get_by_name() use devm_clk_get_prepared() which has
several advantages:
- Combines getting the clock and a call to clk_prepare(). The latter
can be dropped from sti_pwm_probe() accordingly.
- Cares for calling clk_put() which is missing in both probe's error
path and the remove function.
- Cares for calling clk_unprepare() which can be dropped from the error
paths and the remove function. (Note that not all error path got this
right.)
With additionally using devm_pwmchip_add() instead of pwmchip_add() the
remove callback can be dropped completely. With it the last user of
platform_get_drvdata() goes away and so platform_set_drvdata() can be
dropped from the probe function, too.
Fixes: 378fe115d1 ("pwm: sti: Add new driver for ST's PWM IP")
Link: https://lore.kernel.org/r/81f0e1d173652f435afda6719adaed1922fe059a.1710068192.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Memory holding a struct device must not be freed before the reference
count drops to zero. So a struct pwm_chip must not live in memory
freed by a driver on unbind. All in-tree drivers were fixed accordingly,
but as out-of-tree drivers, that were not adapted, still compile fine,
catch these in pwmchip_add().
Link: https://lore.kernel.org/r/35f5b229c98f78b2f6ce2397259a4a936be477c0.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
- fix a regression in pin access control in gpio-tegra186
- make data pointer dereference robust in Intel Tangier driver
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmYr5rEACgkQEacuoBRx
13INpxAAin4FChYUBmGscEP0NBDwbKRCdq2BDPbU6OnECg1pv9wEUkVnK/qiG9VZ
uvLyFbQi7Zr1v95m0wMHVgkqGwv9GcicKrqwmZyy7UWlx59dF2u07uXkLoR3Dywv
95/xjzEmUV3kkMk6gDiJJDcYstmJO4XUg7jKvfiIH1OHVEBQ/YTP84pFY1OLXJF1
Vhzn5QJnKMrmB4/F/ALcg6m7WC7T6IJ2SXzY5WR42cmP7Z8kRfbglEOM/J02juKe
tflH1fGdM+n3kzNTpxF6l8Aufmweqrl3KUewFsUhcG/Q8Lb+e6feKmcAD4YhgYkz
+tdwMN9Ng8v7PolIo/6vTsdRpy/EvbV6nOTPasrNdGBh5p+QNMjfn1TosYq/zPOK
PmDx2t22zYMJ6e+e7FP7IUzjSBPlXIWrvpOzvUmTqeMl73+4j6o31k5gLFdNysf/
7JMLLkAc9eEI4RYbDRBQaJqjqvaf626QqoTjQ0AEqgdpxcH2bo7alRN9Oa6iet5b
mGQa+KZ/igx9ZadiljEYPhqc1S3YHOPTl19yXKppwAC+BxNLMtEsIOQTUFHSWEUq
q3NtxYbfR2yd/+iNLbEd2Pl2aNp7gTyuMMPTCk+M7oqrF1uCqmT79kNEGYM+arR8
OMpJ/fLk/hdL9jasHIhlYc7XwZ8HFNyzpCpwAbGmmqigVsw8E2s=
=9Udp
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a regression in pin access control in gpio-tegra186
- make data pointer dereference robust in Intel Tangier driver
* tag 'gpio-fixes-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tegra186: Fix tegra186_gpio_is_accessible() check
gpio: tangier: Use correct type for the IRQ chip data
Describe the Ethernet LEDs for the Raspberry Pi 4 model B board as well
as the Raspberry Pi 4 CM board. The Raspberry Pi 400 board does not
include RJ45 connector LEDs so the 'leds' node is deleted accordingly.
The Ethernet PHY LEDs are numbered in the PHY package/pin list from LED1
through LED4, however their address within the LED registers function
selector is 0-indexed.
Link: https://lore.kernel.org/r/20240423191500.1443636-1-florian.fainelli@broadcom.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
synchronously by default. Asynchronous removal has always been
possible but it isn't the default. It is important that synchronous
removal be preserved, otherwise it is an interface change that
breaks lvm2.
- Remove errant semicolon in drivers/md/dm-vdo/murmurhash3.c
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmYr08wACgkQxSPxCi2d
A1qSXAgAsmfo5nV8/tNsrG3aBYN/rbGyEQaKl+m3eGK3T874WyrbW/On5qfGzEO1
09O5jNEMhkEHBQq6tKu/Gp87xLVJroIOMLTYpmCg6nnlwVIifFy1uuaBFA1xgM9U
xf7myg6fRj66Yjwv0y1WmTaQTX30s9alJ7f/PZQT1MJFhGIuHPIns3bsyZ43RcOl
pNkS9jjdHkDpXK/cWseb9mz6TAISa8Fn2NYkDPvq6r/J/aIxhRiHlhlzFuQnnfkH
Rg5GVg2R/yCZiGQpuA6IqfEX6eqc4HlZa5Ty2zj9BjUhmj+YbuLEKj+uMEB6wMPd
uK7uWfkxZYvsBAdaFfSpU8XyTumaAA==
=zK77
-----END PGP SIGNATURE-----
Merge tag 'for-6.9/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix 6.9 regression so that DM device removal is performed
synchronously by default.
Asynchronous removal has always been possible but it isn't the
default. It is important that synchronous removal be preserved,
otherwise it is an interface change that breaks lvm2.
- Remove errant semicolon in drivers/md/dm-vdo/murmurhash3.c
* tag 'for-6.9/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: restore synchronous close of device mapper block device
dm vdo murmurhash: remove unneeded semicolon
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZiulnAAKCRCRxhvAZXjc
ogO+AP9z3+WAvgGmJkWOjT1aOrcQWVe+ZEdEUdK26ufkHhM5vAD/RXmdUBVHcYWk
3oE1hG8bONOASUc6dUIATPHBDjvqFg8=
=LtmL
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains a few small fixes for this merge window and the attempt
to handle the ntfs removal regression that was reported a little while
ago:
- After the removal of the legacy ntfs driver we received reports
about regressions for some people that do mount "ntfs" explicitly
and expect the driver to be available. Since ntfs3 is a drop-in for
legacy ntfs we alias legacy ntfs to ntfs3 just like ext3 is aliased
to ext4.
We also enforce legacy ntfs is always mounted read-only and give it
custom file operations to ensure that ioctl()'s can't be abused to
perform write operations.
- Fix an unbalanced module_get() in bdev_open().
- Two smaller fixes for the netfs work done earlier in this cycle.
- Fix the errno returned from the new FS_IOC_GETUUID and
FS_IOC_GETFSSYSFSPATH ioctls. Both commands just pull information
out of the superblock so there's no need to call into the actual
ioctl handlers.
So instead of returning ENOIOCTLCMD to indicate to fallback we just
return ENOTTY directly avoiding that indirection"
* tag 'vfs-6.9-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix the pre-flush when appending to a file in writethrough mode
netfs: Fix writethrough-mode error handling
ntfs3: add legacy ntfs file operations
ntfs3: enforce read-only when used as legacy ntfs driver
ntfs3: serve as alias for the legacy ntfs driver
block: fix module reference leakage from bdev_open_by_dev error path
fs: Return ENOTTY directly if FS_IOC_GETUUID or FS_IOC_GETFSSYSFSPATH fail
-----BEGIN PGP SIGNATURE-----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=3eqZ
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix some build errors and some trivial runtime bugs"
* tag 'loongarch-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Lately init pmu after smp is online
LoongArch: Fix callchain parse error with kernel tracepoint events
LoongArch: Fix access error when read fault on a write-only VMA
LoongArch: Fix a build error due to __tlb_remove_tlb_entry()
LoongArch: Fix Kconfig item and left code related to CRASH_CORE
This is just an update to my maintainer entries as I will switch jobs
soon. Getting a contact email address into the MAINTAINERS file that
will work also after my switch will hopefully reduce people mailing to
the then non-existing address.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmYrSMIACgkQj4D7WH0S
/k6xhwgArEfgAsKp96Svk5c8dXCNzO3652J6K9ldfUgJzByhKNiXmWE7APd/QD6c
VvdzBskD1X8TmmjOtXtL4xhSFyt0Tr2jk/b9pbcvl7/O7n81Lyrzhq1R4yFFSI4E
0Hqnbj+UQxKBv+DAylyeR5LYsciCQxPNlXSLtc7uHKlfceE6bve7d0COrKUNoD0o
XV+98JUXU6PSbByIMj05K+3Sn7a3vqR4GOZ7f+sbOrOVRujX3sMSCpCGPqVtqZuo
bWwMw/wyub6AVbARL3l5dvOjXjVltDC+s0TRA5iwNkSnrDKQg8Ho6mISRtwgQmTl
Kyzg6tU+ohuIrMGGWE/tbm2CXI5TbA==
=13ml
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull maintainer entry update from Uwe Kleine-König:
"This is just an update to my maintainer entries as I will switch jobs
soon. Getting a contact email address into the MAINTAINERS file that
will work also after my switch will hopefully reduce people mailing to
the then non-existing address.
I also drop my co-maintenance for SIOX, but that continues to be in
good hands"
* tag 'pwm/for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
MAINTAINERS: Update Uwe's email address, drop SIOX maintenance
This fixes the MediaTek SVS driver to look for the right thermal zone
names, and adds a missing Kconfig dependency for mtk-socinfo.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZieJWigcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R43lIBANyL
3BRdXzIgPtg/EOU///UpTwR/5caUuPAKx4ZoumytAP0RGmRgKSV5BUmKDt3EGNNd
YA0fCXS1cxCtx0fPXh70Dg==
=PD2N
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=dBIl
-----END PGP SIGNATURE-----
Merge tag 'mtk-soc-fixes-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into for-next
MediaTek driver fixes for v6.9
This fixes the MediaTek SVS driver to look for the right thermal zone
names, and adds a missing Kconfig dependency for mtk-socinfo.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add quirks table to get CPPC capabilities issue fixed by providing
correct perf or frequency values while driver loading.
If CPPC capabilities are not defined in the ACPI tables or wrongly
defined by platform firmware, it needs to use quick to get those
issues fixed with correct workaround values to make pstate driver
can be loaded even though there are CPPC capabilities errors.
The workaround will match the broken BIOS which lack of CPPC capabilities
nominal_freq and lowest_freq definition in the ACPI table.
$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/lowest_freq
0
$ cat /sys/devices/system/cpu/cpu0/acpi_cppc/nominal_freq
0
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
