mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
1,280,080 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
David Howells
|
93a4315512 |
cifs: Fix missing set of remote_i_size
Occasionally, the generic/001 xfstest will fail indicating corruption in
one of the copy chains when run on cifs against a server that supports
FSCTL_DUPLICATE_EXTENTS_TO_FILE (eg. Samba with a share on btrfs). The
problem is that the remote_i_size value isn't updated by cifs_setsize()
when called by smb2_duplicate_extents(), but i_size *is*.
This may cause cifs_remap_file_range() to then skip the bit after calling
->duplicate_extents() that sets sizes.
Fix this by calling netfs_resize_file() in smb2_duplicate_extents() before
calling cifs_setsize() to set i_size.
This means we don't then need to call netfs_resize_file() upon return from
->duplicate_extents(), but we also fix the test to compare against the pre-dup
inode size.
[Note that this goes back before the addition of remote_i_size with the
netfs_inode struct. It should probably have been setting cifsi->server_eof
previously.]
Fixes:
|
||
|
David Howells
|
8a16072335 |
cifs: Fix smb3_insert_range() to move the zero_point
Fix smb3_insert_range() to move the zero_point over to the new EOF.
Without this, generic/147 fails as reads of data beyond the old EOF point
return zeroes.
Fixes:
|
||
Linus Torvalds
|
0b32d436c0 |
Jeff Xu's implementation of the mseal() syscall.
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZlDhVAAKCRDdBJ7gKXxA jqDSAP0aGY505ka3+ffe6e5OP7W7syKjXHLy84Hp2t6YWnU+6QEA86qcXnfOI7HB 7FPy+fa9sMm6BfAAZPkYnICAgVpbBAw= =Q3vf -----END PGP SIGNATURE----- Merge tag 'mm-stable-2024-05-24-11-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull more mm updates from Andrew Morton: "Jeff Xu's implementation of the mseal() syscall" * tag 'mm-stable-2024-05-24-11-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: selftest mm/mseal read-only elf memory segment mseal: add documentation selftest mm/mseal memory sealing mseal: add mseal syscall mseal: wire up mseal syscall |
||
Chengming Zhou
|
90e8234988 |
mm/ksm: fix possible UAF of stable_node
The commit |
||
Miaohe Lin
|
8cf360b9d6 |
mm/memory-failure: fix handling of dissolved but not taken off from buddy pages
When I did memory failure tests recently, below panic occurs:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00
flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff)
raw: 06fffe0000000000 dead000000000100 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000009 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(!PageBuddy(page))
------------[ cut here ]------------
kernel BUG at include/linux/page-flags.h:1009!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:__del_page_from_free_list+0x151/0x180
RSP: 0018:ffffa49c90437998 EFLAGS: 00000046
RAX: 0000000000000035 RBX: 0000000000000009 RCX: ffff8dd8dfd1c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff8dd8dfd1c9c0
RBP: ffffd901233b8000 R08: ffffffffab5511f8 R09: 0000000000008c69
R10: 0000000000003c15 R11: ffffffffab5511f8 R12: ffff8dd8fffc0c80
R13: 0000000000000001 R14: ffff8dd8fffc0c80 R15: 0000000000000009
FS: 00007ff916304740(0000) GS:ffff8dd8dfd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055eae50124c8 CR3: 00000008479e0000 CR4: 00000000000006f0
Call Trace:
<TASK>
__rmqueue_pcplist+0x23b/0x520
get_page_from_freelist+0x26b/0xe40
__alloc_pages_noprof+0x113/0x1120
__folio_alloc_noprof+0x11/0xb0
alloc_buddy_hugetlb_folio.isra.0+0x5a/0x130
__alloc_fresh_hugetlb_folio+0xe7/0x140
alloc_pool_huge_folio+0x68/0x100
set_max_huge_pages+0x13d/0x340
hugetlb_sysctl_handler_common+0xe8/0x110
proc_sys_call_handler+0x194/0x280
vfs_write+0x387/0x550
ksys_write+0x64/0xe0
do_syscall_64+0xc2/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff916114887
RSP: 002b:00007ffec8a2fd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000055eae500e350 RCX: 00007ff916114887
RDX: 0000000000000004 RSI: 000055eae500e390 RDI: 0000000000000003
RBP: 000055eae50104c0 R08: 0000000000000000 R09: 000055eae50104c0
R10: 0000000000000077 R11: 0000000000000246 R12: 0000000000000004
R13: 0000000000000004 R14: 00007ff916216b80 R15: 00007ff916216a00
</TASK>
Modules linked in: mce_inject hwpoison_inject
---[ end trace 0000000000000000 ]---
And before the panic, there had an warning about bad page state:
BUG: Bad page state in process page-types pfn:8cee00
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00
flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff)
page_type: 0xffffff7f(buddy)
raw: 06fffe0000000000 ffffd901241c0008 ffffd901240f8008 0000000000000000
raw: 0000000000000000 0000000000000009 00000000ffffff7f 0000000000000000
page dumped because: nonzero mapcount
Modules linked in: mce_inject hwpoison_inject
CPU: 8 PID: 154211 Comm: page-types Not tainted 6.9.0-rc4-00499-g5544ec3178e2-dirty #22
Call Trace:
<TASK>
dump_stack_lvl+0x83/0xa0
bad_page+0x63/0xf0
free_unref_page+0x36e/0x5c0
unpoison_memory+0x50b/0x630
simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110
debugfs_attr_write+0x42/0x60
full_proxy_write+0x5b/0x80
vfs_write+0xcd/0x550
ksys_write+0x64/0xe0
do_syscall_64+0xc2/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f189a514887
RSP: 002b:00007ffdcd899718 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f189a514887
RDX: 0000000000000009 RSI: 00007ffdcd899730 RDI: 0000000000000003
RBP: 00007ffdcd8997a0 R08: 0000000000000000 R09: 00007ffdcd8994b2
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcda199a8
R13: 0000000000404af1 R14: 000000000040ad78 R15: 00007f189a7a5040
</TASK>
The root cause should be the below race:
memory_failure
try_memory_failure_hugetlb
me_huge_page
__page_handle_poison
dissolve_free_hugetlb_folio
drain_all_pages -- Buddy page can be isolated e.g. for compaction.
take_page_off_buddy -- Failed as page is not in the buddy list.
-- Page can be putback into buddy after compaction.
page_ref_inc -- Leads to buddy page with refcnt = 1.
Then unpoison_memory() can unpoison the page and send the buddy page back
into buddy list again leading to the above bad page state warning. And
bad_page() will call page_mapcount_reset() to remove PageBuddy from buddy
page leading to later VM_BUG_ON_PAGE(!PageBuddy(page)) when trying to
allocate this page.
Fix this issue by only treating __page_handle_poison() as successful when
it returns 1.
Link: https://lkml.kernel.org/r/20240523071217.1696196-1-linmiaohe@huawei.com
Fixes:
|
||
Yuanyuan Zhong
|
6d065f507d |
mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
After switching smaps_rollup to use VMA iterator, searching for next entry
is part of the condition expression of the do-while loop. So the current
VMA needs to be addressed before the continue statement.
Otherwise, with some VMAs skipped, userspace observed memory
consumption from /proc/pid/smaps_rollup will be smaller than the sum of
the corresponding fields from /proc/pid/smaps.
Link: https://lkml.kernel.org/r/20240523183531.2535436-1-yzhong@purestorage.com
Fixes:
|
||
Ryusuke Konishi
|
eb85dace89 |
nilfs2: fix potential hang in nilfs_detach_log_writer()
Syzbot has reported a potential hang in nilfs_detach_log_writer() called
during nilfs2 unmount.
Analysis revealed that this is because nilfs_segctor_sync(), which
synchronizes with the log writer thread, can be called after
nilfs_segctor_destroy() terminates that thread, as shown in the call trace
below:
nilfs_detach_log_writer
nilfs_segctor_destroy
nilfs_segctor_kill_thread --> Shut down log writer thread
flush_work
nilfs_iput_work_func
nilfs_dispose_list
iput
nilfs_evict_inode
nilfs_transaction_commit
nilfs_construct_segment (if inode needs sync)
nilfs_segctor_sync --> Attempt to synchronize with
log writer thread
*** DEADLOCK ***
Fix this issue by changing nilfs_segctor_sync() so that the log writer
thread returns normally without synchronizing after it terminates, and by
forcing tasks that are already waiting to complete once after the thread
terminates.
The skipped inode metadata flushout will then be processed together in the
subsequent cleanup work in nilfs_segctor_destroy().
Link: https://lkml.kernel.org/r/20240520132621.4054-4-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+e3973c409251e136fdd0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e3973c409251e136fdd0
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: "Bai, Shuangpeng" <sjb7183@psu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Ryusuke Konishi
|
936184eadd |
nilfs2: fix unexpected freezing of nilfs_segctor_sync()
A potential and reproducible race issue has been identified where
nilfs_segctor_sync() would block even after the log writer thread writes a
checkpoint, unless there is an interrupt or other trigger to resume log
writing.
This turned out to be because, depending on the execution timing of the
log writer thread running in parallel, the log writer thread may skip
responding to nilfs_segctor_sync(), which causes a call to schedule()
waiting for completion within nilfs_segctor_sync() to lose the opportunity
to wake up.
The reason why waking up the task waiting in nilfs_segctor_sync() may be
skipped is that updating the request generation issued using a shared
sequence counter and adding an wait queue entry to the request wait queue
to the log writer, are not done atomically. There is a possibility that
log writing and request completion notification by nilfs_segctor_wakeup()
may occur between the two operations, and in that case, the wait queue
entry is not yet visible to nilfs_segctor_wakeup() and the wake-up of
nilfs_segctor_sync() will be carried over until the next request occurs.
Fix this issue by performing these two operations simultaneously within
the lock section of sc_state_lock. Also, following the memory barrier
guidelines for event waiting loops, move the call to set_current_state()
in the same location into the event waiting loop to ensure that a memory
barrier is inserted just before the event condition determination.
Link: https://lkml.kernel.org/r/20240520132621.4054-3-konishi.ryusuke@gmail.com
Fixes:
|
||
|
Ryusuke Konishi
|
f5d4e04634 |
nilfs2: fix use-after-free of timer for log writer thread
Patch series "nilfs2: fix log writer related issues".
This bug fix series covers three nilfs2 log writer-related issues,
including a timer use-after-free issue and potential deadlock issue on
unmount, and a potential freeze issue in event synchronization found
during their analysis. Details are described in each commit log.
This patch (of 3):
A use-after-free issue has been reported regarding the timer sc_timer on
the nilfs_sc_info structure.
The problem is that even though it is used to wake up a sleeping log
writer thread, sc_timer is not shut down until the nilfs_sc_info structure
is about to be freed, and is used regardless of the thread's lifetime.
Fix this issue by limiting the use of sc_timer only while the log writer
thread is alive.
Link: https://lkml.kernel.org/r/20240520132621.4054-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20240520132621.4054-2-konishi.ryusuke@gmail.com
Fixes:
|
||
Michael Ellerman
|
1901472fa8 |
selftests/mm: fix build warnings on ppc64
Fix warnings like:
In file included from uffd-unit-tests.c:8:
uffd-unit-tests.c: In function `uffd_poison_handle_fault':
uffd-common.h:45:33: warning: format `%llu' expects argument of type
`long long unsigned int', but argument 3 has type `__u64' {aka `long
unsigned int'} [-Wformat=]
By switching to unsigned long long for u64 for ppc64 builds.
Link: https://lkml.kernel.org/r/20240521030219.57439-1-mpe@ellerman.id.au
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Will Deacon
|
b1480ed230 |
arm64: patching: fix handling of execmem addresses
Klara Modin reported warnings for a kernel configured with BPF_JIT but
without MODULES:
[ 44.131296] Trying to vfree() bad address (000000004a17c299)
[ 44.138024] WARNING: CPU: 1 PID: 193 at mm/vmalloc.c:3189 remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.146675] CPU: 1 PID: 193 Comm: kworker/1:2 Tainted: G D W 6.9.0-01786-g2c9e5d4a0082 #25
[ 44.158229] Hardware name: Raspberry Pi 3 Model B (DT)
[ 44.164433] Workqueue: events bpf_prog_free_deferred
[ 44.170492] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 44.178601] pc : remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.183705] lr : remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.188772] sp : ffff800082a13c70
[ 44.193112] x29: ffff800082a13c70 x28: 0000000000000000 x27: 0000000000000000
[ 44.201384] x26: 0000000000000000 x25: ffff00003a44efa0 x24: 00000000d4202000
[ 44.209658] x23: ffff800081223dd0 x22: ffff00003a198a40 x21: ffff8000814dd880
[ 44.217924] x20: 00000000d4202000 x19: ffff8000814dd880 x18: 0000000000000006
[ 44.226206] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000002
[ 44.234460] x14: ffff8000811a6370 x13: 0000000020000000 x12: 0000000000000000
[ 44.242710] x11: ffff8000811a6370 x10: 0000000000000144 x9 : ffff8000811fe370
[ 44.250959] x8 : 0000000000017fe8 x7 : 00000000fffff000 x6 : ffff8000811fe370
[ 44.259206] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ 44.267457] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000002203240
[ 44.275703] Call trace:
[ 44.279158] remove_vm_area (mm/vmalloc.c:3189 (discriminator 1))
[ 44.283858] vfree (mm/vmalloc.c:3322)
[ 44.287835] execmem_free (mm/execmem.c:70)
[ 44.292347] bpf_jit_free_exec+0x10/0x1c
[ 44.297283] bpf_prog_pack_free (kernel/bpf/core.c:1006)
[ 44.302457] bpf_jit_binary_pack_free (kernel/bpf/core.c:1195)
[ 44.307951] bpf_jit_free (include/linux/filter.h:1083 arch/arm64/net/bpf_jit_comp.c:2474)
[ 44.312342] bpf_prog_free_deferred (kernel/bpf/core.c:2785)
[ 44.317785] process_one_work (kernel/workqueue.c:3273)
[ 44.322684] worker_thread (kernel/workqueue.c:3342 (discriminator 2) kernel/workqueue.c:3429 (discriminator 2))
[ 44.327292] kthread (kernel/kthread.c:388)
[ 44.331342] ret_from_fork (arch/arm64/kernel/entry.S:861)
The problem is because bpf_arch_text_copy() silently fails to write to the
read-only area as a result of patch_map() faulting and the resulting
-EFAULT being chucked away.
Update patch_map() to use CONFIG_EXECMEM instead of
CONFIG_STRICT_MODULE_RWX to check for vmalloc addresses.
Link: https://lkml.kernel.org/r/20240521213813.703309-1-rppt@kernel.org
Fixes:
|
||
Dev Jain
|
fb9293b6b0 |
selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation
Reset nr_hugepages to zero before the start of the test.
If a non-zero number of hugepages is already set before the start of the
test, the following problems arise:
- The probability of the test getting OOM-killed increases. Proof:
The test wants to run on 80% of available memory to prevent OOM-killing
(see original code comments). Let the value of mem_free at the start
of the test, when nr_hugepages = 0, be x. In the other case, when
nr_hugepages > 0, let the memory consumed by hugepages be y. In the
former case, the test operates on 0.8 * x of memory. In the latter,
the test operates on 0.8 * (x - y) of memory, with y already filled,
hence, memory consumed is y + 0.8 * (x - y) = 0.8 * x + 0.2 * y > 0.8 *
x. Q.E.D
- The probability of a bogus test success increases. Proof: Let the
memory consumed by hugepages be greater than 25% of x, with x and y
defined as above. The definition of compaction_index is c_index = (x -
y)/z where z is the memory consumed by hugepages after trying to
increase them again. In check_compaction(), we set the number of
hugepages to zero, and then increase them back; the probability that
they will be set back to consume at least y amount of memory again is
very high (since there is not much delay between the two attempts of
changing nr_hugepages). Hence, z >= y > (x/4) (by the 25% assumption).
Therefore, c_index = (x - y)/z <= (x - y)/y = x/y - 1 < 4 - 1 = 3
hence, c_index can always be forced to be less than 3, thereby the test
succeeding always. Q.E.D
Link: https://lkml.kernel.org/r/20240521074358.675031-4-dev.jain@arm.com
Fixes:
|
||
|
Dev Jain
|
9ad665ef55 |
selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
Currently, the test tries to set nr_hugepages to zero, but that is not
actually done because the file offset is not reset after read(). Fix that
using lseek().
Link: https://lkml.kernel.org/r/20240521074358.675031-3-dev.jain@arm.com
Fixes:
|
||
|
Dev Jain
|
d4202e66a4 |
selftests/mm: compaction_test: fix bogus test success on Aarch64
Patch series "Fixes for compaction_test", v2.
The compaction_test memory selftest introduces fragmentation in memory
and then tries to allocate as many hugepages as possible. This series
addresses some problems.
On Aarch64, if nr_hugepages == 0, then the test trivially succeeds since
compaction_index becomes 0, which is less than 3, due to no division by
zero exception being raised. We fix that by checking for division by
zero.
Secondly, correctly set the number of hugepages to zero before trying
to set a large number of them.
Now, consider a situation in which, at the start of the test, a non-zero
number of hugepages have been already set (while running the entire
selftests/mm suite, or manually by the admin). The test operates on 80%
of memory to avoid OOM-killer invocation, and because some memory is
already blocked by hugepages, it would increase the chance of OOM-killing.
Also, since mem_free used in check_compaction() is the value before we
set nr_hugepages to zero, the chance that the compaction_index will
be small is very high if the preset nr_hugepages was high, leading to a
bogus test success.
This patch (of 3):
Currently, if at runtime we are not able to allocate a huge page, the test
will trivially pass on Aarch64 due to no exception being raised on
division by zero while computing compaction_index. Fix that by checking
for nr_hugepages == 0. Anyways, in general, avoid a division by zero by
exiting the program beforehand. While at it, fix a typo, and handle the
case where the number of hugepages may overflow an integer.
Link: https://lkml.kernel.org/r/20240521074358.675031-1-dev.jain@arm.com
Link: https://lkml.kernel.org/r/20240521074358.675031-2-dev.jain@arm.com
Fixes:
|
||
Satya Priya Kakitapalli
|
c17d39f565 |
mailmap: update email address for Satya Priya
Update mailmap with my latest email ID, quic_c_skakit@quicinc.com is no longer active. Link: https://lkml.kernel.org/r/20240515-mailmap-update-v1-1-df4853f757a3@quicinc.com Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Cc: Ajit Pandey <quic_ajipan@quicinc.com> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Imran Shaik <quic_imrashai@quicinc.com> Cc: Jagadeesh Kona <quic_jkona@quicinc.com> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Miaohe Lin
|
fe6f86f4b4 |
mm/huge_memory: don't unpoison huge_zero_folio
When I did memory failure tests recently, below panic occurs:
kernel BUG at include/linux/mm.h:1135!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 137 Comm: kswapd1 Not tainted 6.9.0-rc4-00491-gd5ce28f156fe-dirty #14
RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0
RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246
RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0
RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492
R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00
FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0
Call Trace:
<TASK>
do_shrink_slab+0x14f/0x6a0
shrink_slab+0xca/0x8c0
shrink_node+0x2d0/0x7d0
balance_pgdat+0x33a/0x720
kswapd+0x1f3/0x410
kthread+0xd5/0x100
ret_from_fork+0x2f/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in: mce_inject hwpoison_inject
---[ end trace 0000000000000000 ]---
RIP: 0010:shrink_huge_zero_page_scan+0x168/0x1a0
RSP: 0018:ffff9933c6c57bd0 EFLAGS: 00000246
RAX: 000000000000003e RBX: 0000000000000000 RCX: ffff88f61fc5c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff88f61fc5c9c0
RBP: ffffcd7c446b0000 R08: ffffffff9a9405f0 R09: 0000000000005492
R10: 00000000000030ea R11: ffffffff9a9405f0 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88e703c4ac00
FS: 0000000000000000(0000) GS:ffff88f61fc40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f4da6e9878 CR3: 0000000c71048000 CR4: 00000000000006f0
The root cause is that HWPoison flag will be set for huge_zero_folio
without increasing the folio refcnt. But then unpoison_memory() will
decrease the folio refcnt unexpectedly as it appears like a successfully
hwpoisoned folio leading to VM_BUG_ON_PAGE(page_ref_count(page) == 0) when
releasing huge_zero_folio.
Skip unpoisoning huge_zero_folio in unpoison_memory() to fix this issue.
We're not prepared to unpoison huge_zero_folio yet.
Link: https://lkml.kernel.org/r/20240516122608.22610-1-linmiaohe@huawei.com
Fixes:
|
||
Andrey Konovalov
|
2e577732e8 |
kasan, fortify: properly rename memintrinsics
After commit |
||
Suren Baghdasaryan
|
a38568a0b4 |
lib: add version into /proc/allocinfo output
Add version string and a header at the beginning of /proc/allocinfo to
allow later format changes. Example output:
> head /proc/allocinfo
allocinfo - version: 1.0
# <size> <calls> <tag info>
0 0 init/main.c:1314 func:do_initcalls
0 0 init/do_mounts.c:353 func:mount_nodev_root
0 0 init/do_mounts.c:187 func:mount_root_generic
0 0 init/do_mounts.c:158 func:do_mount_root
0 0 init/initramfs.c:493 func:unpack_to_rootfs
0 0 init/initramfs.c:492 func:unpack_to_rootfs
0 0 init/initramfs.c:491 func:unpack_to_rootfs
512 1 arch/x86/events/rapl.c:681 func:init_rapl_pmus
128 1 arch/x86/events/rapl.c:571 func:rapl_cpu_online
[akpm@linux-foundation.org: remove stray newline from struct allocinfo_private]
Link: https://lkml.kernel.org/r/20240514163128.3662251-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Hailong.Liu
|
8e0545c83d |
mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
commit |
||
|
Linus Torvalds
|
f1f9984fdc |
RISC-V Patches for the 6.10 Merge Window, Part 2
* The compression format used for boot images is now configurable at build time, and these formats are shown in `make help`. * access_ok() has been optimized. * A pair of performance bugs have been fixed in the uaccess handlers. * Various fixes and cleanups, including one for the IMSIC build failure and one for the early-boot ftrace illegal NOPs bug. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmZQtRwTHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiWPBD/0UitwMg88m6urvMd0Pfvwwbu/OnGqW TZT8C55iJi/e5f9K4mBrSyjATI8z/MblD+Zz0adX8ygavS4JuQ7DoWwb1yTT3pww +z74FkWeJuiar+HfbhQ602CfMrnzvWjnyJ3URemqy5pIBKyvD9gGkDJDZwf8hJTk Vqh5qVtnBqFBO9kWpIx+/pLCfpyHVNkhWr1AzKfoqQ1WPIpZ/o0IGdvS88rL+EBR QOXiwVhEsRfC+LT6Jhn8l2bGp7PaSRVOid19OxNsJKpAhpL6AOscaafclVrLBuTd gkys0rT2dHdoWTAkPHQpvlOI6OmGTgopxo5pUKJHS8J9VRoBun25zC1FGBF8uyVd 05CabWPnh7olNsRge9XiNj3x8PXjGVi7X7wUbRgOBG5aDc6TbKdxu37J0tXe0M7a Q74ctQvk8Nk6bQWirgTNlfJJHzL5pJbKc9VwY5uGX4qTmH+yEvCIt45ZXgXOuS/F eqijStkkdXUDnkMdcpaZJvXP80rHcgfP8bqevvPymRli8ER9zj9aXJQ3rmCUcPz+ EtbyS+vOEN31wNTA1EQlfIRxfvr22x7r70DDdRwmhuD1W1tgfblm+R0Cq76I5rnJ VSgXKq1b4mY0eautqXEnPGyqb7H8iJIq7AoyfbzzWN+4u6yVEUvpDKueeksy+fFt sGNtjWqGhWyKXg== =/Qtt -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.10-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - The compression format used for boot images is now configurable at build time, and these formats are shown in `make help` - access_ok() has been optimized - A pair of performance bugs have been fixed in the uaccess handlers - Various fixes and cleanups, including one for the IMSIC build failure and one for the early-boot ftrace illegal NOPs bug * tag 'riscv-for-linus-6.10-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix early ftrace nop patching irqchip: riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict riscv: selftests: Add signal handling vector tests riscv: mm: accelerate pagefault when badaccess riscv: uaccess: Relax the threshold for fast path riscv: uaccess: Allow the last potential unrolled copy riscv: typo in comment for get_f64_reg Use bool value in set_cpu_online() riscv: selftests: Add hwprobe binaries to .gitignore riscv: stacktrace: fixed walk_stackframe() ftrace: riscv: move from REGS to ARGS riscv: do not select MODULE_SECTIONS by default riscv: show help string for riscv-specific targets riscv: make image compression configurable riscv: cpufeature: Fix extension subset checking riscv: cpufeature: Fix thead vector hwcap removal riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context riscv: force PAGE_SIZE linear mapping if debug_pagealloc is enabled riscv: Define TASK_SIZE_MAX for __access_ok() riscv: Remove PGDIR_SIZE_L3 and TASK_SIZE_MIN |
||
|
Linus Torvalds
|
9351f138d1 |
xen: branch for v6.10-rc1
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZlCW5wAKCRCAXGG7T9hj vmgfAPwMj6Pf6faPJ8Db4cUkeJqxT60RCjOoCLoiJ5MYtrxIBgEAqFv3JOHaoDCH nogrS10fldxUTtxtx8DciFtzZ59jJws= =LXuw -----END PGP SIGNATURE----- Merge tag 'for-linus-6.10a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - a small cleanup in the drivers/xen/xenbus Makefile - a fix of the Xen xenstore driver to improve connecting to a late started Xenstore - an enhancement for better support of ballooning in PVH guests - a cleanup using try_cmpxchg() instead of open coding it * tag 'for-linus-6.10a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: drivers/xen: Improve the late XenStore init protocol xen/xenbus: Use *-y instead of *-objs in Makefile xen/x86: add extra pages to unpopulated-alloc if available locking/x86/xen: Use try_cmpxchg() in xen_alloc_p2m_entry() |
||
|
Linus Torvalds
|
02c438bbff |
for-6.10-tag
-----BEGIN PGP SIGNATURE-----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=XR4r
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs updates from David Sterba:
"A few more updates, mostly stability fixes or user visible changes:
- fix race in zoned mode during device replace that can lead to
use-after-free
- update return codes and lower message levels for quota rescan where
it's causing false alerts
- fix unexpected qgroup id reuse under some conditions
- fix condition when looking up extent refs
- add option norecovery (removed in 6.8), the intended replacements
haven't been used and some aplications still rely on the old one
- build warning fixes"
* tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: re-introduce 'norecovery' mount option
btrfs: fix end of tree detection when searching for data extent ref
btrfs: scrub: initialize ret in scrub_simple_mirror() to fix compilation warning
btrfs: zoned: fix use-after-free due to race with dev replace
btrfs: qgroup: fix qgroup id collision across mounts
btrfs: qgroup: update rescan message levels and error codes
|
||
|
Linus Torvalds
|
dcb9f48667 |
Changes since last update:
- Convert metadata APIs to byte offsets; - Avoid allocating DEFLATE streams unnecessarily; - Some erofs_show_options() cleanup. -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEQ0A6bDUS9Y+83NPFUXZn5Zlu5qoFAmZQmHARHHhpYW5nQGtl cm5lbC5vcmcACgkQUXZn5Zlu5qrGnhAAnvOifMYekIgY/W0PSGSe85XtXps5vBjo rixZ/vNAl8NrLgzHY5lX+4dbENywEULzdxYAgF4VN9eKNGyuZ4oCBmYStoGueQ41 N1oq36O/CVJDCOLkFUwjD6GpHngjJR3xiU8DRrhKdPZJeYXVEJwZB4KOOymorkO0 Xn9SPrF/GC4YDWJL901RKT8p6gyRNWiWJ/+hwDAxfmCSuzW2uRNnBLeXNvjqj4Z3 u5WEaFSlNRlLWnZPcHy8O3t/XAPkhvTN+C5+YeaePWyHc5WYOM9mWt8VLOFQb60K l+q/cnWXw+8NNbxnuccWVJfEb6zUJmZ5/yTm+Ndutrpk5dFSPb6DjZo5/K36dGls r02XysW+Jl24wBIFkYRHild2WT+gSqo/zyIDsSt/DF+DhpqmnIqAASx4yJenw7ib BNV4m4gQflLrORKpVmsKyHrm5GuHsTWsGc51iX1uqsdfDgN79mFgR1taBAZw162P pPeWuD6XYE+eT+t5nggnXqmZ5qatEhTFkYDjUzSq4ZQfyZnRG8Tl6zbBuyVhaxsO zH1rAmwtI6x+ehHI46Kurh8HT6UrB0CNM6RokYKr6JWVzIdFPPMVKkxcq2KozTPf CBu+Whh/WGFROM8JT2KGCnuz2ZBUZXDtNBJmW+ZnA+z9b7xZ1f31nio4vKKdZU+R swpnV+0q9cs= =qDDl -----END PGP SIGNATURE----- Merge tag 'erofs-for-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull more erofs updates from Gao Xiang: "The main ones are metadata API conversion to byte offsets by Al Viro. Another patch gets rid of unnecessary memory allocation out of DEFLATE decompressor. The remaining one is a trivial cleanup. - Convert metadata APIs to byte offsets - Avoid allocating DEFLATE streams unnecessarily - Some erofs_show_options() cleanup" * tag 'erofs-for-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: avoid allocating DEFLATE streams before mounting z_erofs_pcluster_begin(): don't bother with rounding position down erofs: don't round offset down for erofs_read_metabuf() erofs: don't align offset for erofs_read_metabuf() (simple cases) erofs: mechanically convert erofs_read_metabuf() to offsets erofs: clean up erofs_show_options() |
||
|
Linus Torvalds
|
c40b1994b9 |
bcachefs fixes for 6.10-rc1
Just a few syzbot fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEKnAFLkS8Qha+jvQrE6szbY3KbnYFAmZQk0cACgkQE6szbY3K bna7gA/+MSY3I95CwaJ4bBq5SCxOaRcrX099LFh8Zrj+OF+DWE2PtVo1LhhgnYrQ KpZrS2Q9Qgb2yVqYzOY6LBfH4il1O/WwvloMG0MbuYiQFu9/JL/6CEK9uFyiGmaC fdiFEN3u+8AK6phTFaqUU2ncG0XFQ1Ple5zmFXo4Y3ZJeNaubJeEDac+kbRvOwYh rQ6Iy0FNoQymv0BzmuM7g2NsbhdAgHTv7rhGbfpNBZv3lu0yDXsfZZgWTr2oXMSP FMhm4bcTGAFp5hbwq9k56ND8oSFpamsH7SwS4bDlEe1CNOfMI1JjnrvSEuDrocAE 1Jn2J2Gv9NXnEHKamVzzpUILG67buEtYzJyDQk51N4kulgThdpRzjm+11ylD5U0U wzIK1HXsKHtRdUiIhQGLCLW61FXM+0QBIk2eXhPq88jsM2zTL7iMbXR3P/nvgUDy 8ia8g5Q+nKxcb223M8WmK0rBwlaNasE/hXiFT54ntt8bK5nmVJjPMxVXUmYth3hw 7STkuT0k5jVsMG1NqLkg+wSupj1AuWbD2hIcas7GkxarEYAULbQcClHYGpMll3Tw +pJfLjAtBOkcE4TwWDLflVBhwWtdmPNhk51Q3iLVRp0Gm7t0rhE2vE6TjpsIFnrg rUAgaqQqQ2WXfsRaGa2wx0tRKoW+8Iigq13ndn1AZIrfEtQkYUs= =vuNC -----END PGP SIGNATURE----- Merge tag 'bcachefs-2024-05-24' of https://evilpiepirate.org/git/bcachefs Pull bcachefs fixes from Kent Overstreet: "Nothing exciting, just syzbot fixes (except for the one FMODE_CAN_ODIRECT patch). Looks like syzbot reports have slowed down; this is all catch up from two weeks of conferences. Next hardening project is using Thomas's error injection tooling to torture test repair" * tag 'bcachefs-2024-05-24' of https://evilpiepirate.org/git/bcachefs: bcachefs: Fix race path in bch2_inode_insert() bcachefs: Ensure we're RW before journalling bcachefs: Fix shutdown ordering bcachefs: Fix unsafety in bch2_dirent_name_bytes() bcachefs: Fix stack oob in __bch2_encrypt_bio() bcachefs: Fix btree_trans leak in bch2_readahead() bcachefs: Fix bogus verify_replicas_entry() assert bcachefs: Check for subvolues with bogus snapshot/inode fields bcachefs: bch2_checksum() returns 0 for unknown checksum type bcachefs: Fix bch2_alloc_ciphers() bcachefs: Add missing guard in bch2_snapshot_has_children() bcachefs: Fix missing parens in drop_locks_do() bcachefs: Improve bch2_assert_pos_locked() bcachefs: Fix shift overflows in replicas.c bcachefs: Fix shift overflow in btree_lost_data() bcachefs: Fix ref in trans_mark_dev_sbs() error path bcachefs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method bcachefs: Fix rcu splat in check_fix_ptrs() |
||
|
Linus Torvalds
|
9ea370f341 |
Input updates for v6.10-rc0
- a change to input core to trim amount of keys data in modalias string in case when a device declares too many keys and they do not fit in uevent buffer instead of reporting an error which results in uevent not being generated at all - support for Machenike G5 Pro Controller added to xpad driver - support for FocalTech FT5452 and FT8719 added to edt-ft5x06 - support for new SPMI vibrator added to pm8xxx-vibrator driver - missing locking added to cyapa touchpad driver - removal of unused fields in various driver structures - explicit initialization of i2c_device_id::driver_data to 0 dropped from input drivers - other assorted fixes and cleanups. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZk/rJQAKCRBAj56VGEWX nOFVAQD8lfavuaJwEc0k/P39hZGOnTh423Um5gqIj8FOMw/V3AEA3D9IdTFC32DA JphZ5YvneDAfqu76ZRnjQi2oyOikygo= =8zDF -----END PGP SIGNATURE----- Merge tag 'input-for-v6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a change to input core to trim amount of keys data in modalias string in case when a device declares too many keys and they do not fit in uevent buffer instead of reporting an error which results in uevent not being generated at all - support for Machenike G5 Pro Controller added to xpad driver - support for FocalTech FT5452 and FT8719 added to edt-ft5x06 - support for new SPMI vibrator added to pm8xxx-vibrator driver - missing locking added to cyapa touchpad driver - removal of unused fields in various driver structures - explicit initialization of i2c_device_id::driver_data to 0 dropped from input drivers - other assorted fixes and cleanups. * tag 'input-for-v6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits) Input: edt-ft5x06 - add support for FocalTech FT5452 and FT8719 dt-bindings: input: touchscreen: edt-ft5x06: Document FT5452 and FT8719 support Input: xpad - add support for Machenike G5 Pro Controller Input: try trimming too long modalias strings Input: drop explicit initialization of struct i2c_device_id::driver_data to 0 Input: zet6223 - remove an unused field in struct zet6223_ts Input: chipone_icn8505 - remove an unused field in struct icn8505_data Input: cros_ec_keyb - remove an unused field in struct cros_ec_keyb Input: lpc32xx-keys - remove an unused field in struct lpc32xx_kscan_drv Input: matrix_keypad - remove an unused field in struct matrix_keypad Input: tca6416-keypad - remove unused struct tca6416_drv_data Input: tca6416-keypad - remove an unused field in struct tca6416_keypad_chip Input: da7280 - remove an unused field in struct da7280_haptic Input: ff-core - prefer struct_size over open coded arithmetic Input: cyapa - add missing input core locking to suspend/resume functions input: pm8xxx-vibrator: add new SPMI vibrator support dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module input: pm8xxx-vibrator: refactor to support new SPMI vibrator Input: pm8xxx-vibrator - correct VIB_MAX_LEVELS calculation Input: sur40 - convert le16 to cpu before use ... |
||
Kundan Kumar
|
1bd293fcf3 |
nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset
bio_vec start offset may be relatively large particularly when large folio gets added to the bio. A bigger offset will result in avoiding the single-segment mapping optimization and end up using expensive mempool_alloc further. Rather than using absolute value, adjust bv_offset by NVME_CTRL_PAGE_SIZE while checking if segment can be fitted into one/two PRP entries. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
Kanchan Joshi
|
64e3d02b43 |
nvme: remove sgs and sws
sgs/sws are unused, so remove these from nvme_ns_head structure. Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Linus Torvalds
|
041c9f71a4 |
sound fixes for 6.10-rc1
A collection of small fixes for 6.10-rc1. Most of changes are various device-specific fixes and quirks, while there are a few small changes in ALSA core timer and module / built-in fixes. -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmZPUagOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE9LYg//QurZR7KBAvim5LcsVDLE5pFUjW0v3fz0+vKB /UpoK1EVxc9pqNXzKi8YDiRoKZY8J8krGHd5FV44qhZl2nVJ87hXbHU5b/i29QUu 4xKC1pMmF0ncJ8qMGhzTynyxw0Hr7soCcxz+4ApDzN/pyzc7QTPEaUB1ND7jTB2z bcYgXyFprJQ1RmsV9u2mGhNEv3tYRaQO1GNxr9ktO/I13CCKd7LkGUSxo5UfOFwC bIrpqG35MDzeVrxEfB1UHlyKhULf9fmpUW0OYYS/DMQFptRa+PXEOgzN81wrhNwL sp2k41x4uRtKrB1DFCeweis4m0OHbV0yakkV/3PTdONzJk4PxWoPuGP4uZyoNz3B FwexeSpZICpgGHeS4WuS0RW3SbQ9n/3d33nzpCYrojyxqCuc6UXGPyiq6QHUVtXZ LnOPyeJRIhS52wpELByJmcnf9ev4ImLSnGWUzz/Mf5dFZCVSXKWVvgQ+UcWbZZnj vTp0mTMQUjuVhE0KuRawMx2YSUU7nuRBukFBihjIRSYJYvZETN7WNjMUA3UnpG1d uKXJaTEm2UqlZtsnKkXrWNIpj4EQjoZo0qgx4ZwSYicLgXDJ/WlHvltdo9fJpRh3 u23957ye7wJ4JMikqyhd0Wzh/1UwOs4GTMWTcim6pKXwlkn8TwCB1F/OT/6xqlYZ gScnqBQ= =VeU/ -----END PGP SIGNATURE----- Merge tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes for 6.10-rc1. Most of changes are various device-specific fixes and quirks, while there are a few small changes in ALSA core timer and module / built-in fixes" * tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 440/460 G11. ALSA: core: Enable proc module when CONFIG_MODULES=y ALSA: core: Fix NULL module pointer assignment at card init ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897 ASoC: dt-bindings: stm32: Ensure compatible pattern matches whole string ASoC: tas2781: Fix wrong loading calibrated data sequence ASoC: tas2552: Add TX path for capturing AUDIO-OUT data ALSA: usb-audio: Fix for sampling rates support for Mbox3 Documentation: sound: Fix trailing whitespaces ALSA: timer: Set lower bound of start tick time ASoC: codecs: ES8326: solve hp and button detect issue ASoC: rt5645: mic-in detection threshold modification ASoC: Intel: sof_sdw_rt_sdca_jack_common: Use name_prefix for `-sdca` detection |
||
|
Linus Torvalds
|
e292ead0c9 |
Char/Misc bugfix for 6.10-rc1
Here is one remaining bugfix for 6.10-rc1 that missed the 6.9-final merge window, and has been sitting in my tree and linux-next for quite a while now, but wasn't sent to you (my fault, travels...) It is a bugfix to resolve an error in the speakup code that could overflow a buffer. It has been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZlA+4A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylbCQCg1yrG9xtO9Gg5CLBcV9gRmAEjKGIAn16Y8Hmm k9R7qGfSOhqPq/qt6Nxx =s69+ -----END PGP SIGNATURE----- Merge tag 'char-misc-6.10-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here is one remaining bugfix for 6.10-rc1 that missed the 6.9-final merge window, and has been sitting in my tree and linux-next for quite a while now, but wasn't sent to you (my fault, travels...) It is a bugfix to resolve an error in the speakup code that could overflow a buffer. It has been in linux-next for a while with no reported problems" * tag 'char-misc-6.10-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: speakup: Fix sizeof() vs ARRAY_SIZE() bug |
||
|
Linus Torvalds
|
f6d199c774 |
TTY/Serial fixes for 6.10-rc1
Here are some small TTY and Serial driver fixes that missed the 6.9-final merge window, but have been in my tree for weeks (my fault, travel caused me to miss this.) These fixes include: - more n_gsm fixes for reported problems - 8520_mtk driver fix - 8250_bcm7271 driver fix - sc16is7xx driver fix All of these have been in linux-next for weeks without any reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZlBGKQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ylOkwCfUOa00YQt3jJwBEC9bQUprW1z95MAoKW00V5g UJgQ7+1d+o4bT/ib5xpj =/O0m -----END PGP SIGNATURE----- Merge tag 'tty-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small TTY and Serial driver fixes that missed the 6.9-final merge window, but have been in my tree for weeks (my fault, travel caused me to miss this) These fixes include: - more n_gsm fixes for reported problems - 8520_mtk driver fix - 8250_bcm7271 driver fix - sc16is7xx driver fix All of these have been in linux-next for weeks without any reported problems" * tag 'tty-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescaler serial: 8250_bcm7271: use default_mux_rate if possible serial: 8520_mtk: Set RTS on shutdown for Rx in-band wakeup tty: n_gsm: fix missing receive state reset after mode switch tty: n_gsm: fix possible out-of-bounds in gsm0_receive() |
||
|
Linus Torvalds
|
b0a9ba13ff |
hardening fixes for v6.10-rc1
- loadpin: Prevent SECURITY_LOADPIN_ENFORCE=y without module decompression (Stephen Boyd) - ubsan: Restore dependency on ARCH_HAS_UBSAN - kunit/fortify: Fix memcmp() test to be amplitude agnostic -----BEGIN PGP SIGNATURE----- iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmZP0w0WHGtlZXNjb29r QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJqYDEACWaY0Xjig6Izo+B+85IozTLf2R Wv3zlOjUhjbRn7enzhVBRRfU216nl/wp8s7pKhNYCEZ7gJ+04hYtZoLY6YV7jtZ0 RAvpwc1dmUm7RZIBxjnzqiNTdttNBniPDE47goV0Yi9JVSDFY1Y/P5GwiAr0PO6W kt1+WBr2zADNpTZziH8MZou7jfK+y1bOZw8rUUFMODrMc0buuLGO2h+lZqASJXNs 5NHPUOoJsZHvQxN/YSyE555VycpoyWiwMvA1XOz1NVKdr1eFP1heu88AnIRKOD7o cMz6W/yUZ+4dYr2yydDGNX+QvFmZuvPz0oXAlI7BAblpT0UU7xv0jaioAhIam87U WxVQSOgkLQBw6Ym79W66HplizCVfEl9aUAYDSK5UJlwdpNE/j16XLYDLKxDi0wUZ pjUy5CF0X7FFNyY7Kp5flqzKrQG31vfqZf/yWhtWu258x604LR6CTkO06IJDINx0 UUrbehie3bGnbu5FS0oVKGH37Mq0aRn4Xk2aUZaFf1Vz/YtU4Wo3FbtyOyFZsdpl aCNyYzmNmfVijDQlLshy6HBACeLPV2DjIJ8pcC74abUV1FX6VOvIDsTy4ELkm9BF WZ8LNryo79lFsFMThhwfCDHubhXoaLjkl4rpOB5x+Ld0q+GgfIb5jMfF507YxrRj 3KxJJKXzUKNf+JFnjg== =VTTF -----END PGP SIGNATURE----- Merge tag 'hardening-v6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - loadpin: Prevent SECURITY_LOADPIN_ENFORCE=y without module decompression (Stephen Boyd) - ubsan: Restore dependency on ARCH_HAS_UBSAN - kunit/fortify: Fix memcmp() test to be amplitude agnostic * tag 'hardening-v6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kunit/fortify: Fix memcmp() test to be amplitude agnostic ubsan: Restore dependency on ARCH_HAS_UBSAN loadpin: Prevent SECURITY_LOADPIN_ENFORCE=y without module decompression |
||
|
Linus Torvalds
|
0eb03c7e8e |
tracefs/eventfs fixes and updates for v6.10:
Bug fixes:
- The eventfs directories need to have unique inode numbers. Make sure that
they do not get the default file inode number.
- Update the inode uid and gid fields on remount.
When a remount happens where a uid and/or gid is specified, all the tracefs
files and directories should get the specified uid and/or gid. But this
can be sporadic when some uids were assigned already. There's already
a list of inodes that are allocated. Just update their uid and gid fields
at the time of remount.
- Update the eventfs_inodes on remount from the top level "events" descriptor.
There was a bug where not all the eventfs files or directories where
getting updated on remount. One fix was to clear the SAVED_UID/GID
flags from the inode list during the iteration of the inodes during
the remount. But because the eventfs inodes can be freed when the last
referenced is released, not all the eventfs_inodes were being updated.
This lead to the ownership selftest to fail if it was run a second
time (the first time would leave eventfs_inodes with no corresponding
tracefs_inode).
Instead, for eventfs_inodes, only process the "events" eventfs_inode
from the list iteration, as it is guaranteed to have a tracefs_inode
(it's never freed while the "events" directory exists). As it has
a list of its children, and the children have a list of their children,
just iterate all the eventfs_inodes from the "events" descriptor and
it is guaranteed to get all of them.
- Clear the EVENT_INODE flag from the tracefs_drop_inode() callback.
Currently the EVENTFS_INODE FLAG is cleared in the tracefs_d_iput()
callback. But this is the wrong location. The iput() callback is
called when the last reference to the dentry inode is hit. There could
be a case where two dentry's have the same inode, and the flag will
be cleared prematurely. The flag needs to be cleared when the last
reference of the inode is dropped and that happens in the inode's
drop_inode() callback handler.
Clean ups:
- Consolidate the creation of a tracefs_inode for an eventfs_inode
A tracefs_inode is created for both files and directories of the
eventfs system. It is open coded. Instead, consolidate it into a
single eventfs_get_inode() function call.
- Remove the eventfs getattr and permission callbacks.
The permissions for the eventfs files and directories are updated
when the inodes are created, on remount, and when the user sets
them (via setattr). The inodes hold the current permissions so
there is no need to have custom getattr or permissions callbacks
as they will more likely cause them to be incorrect. The inode's
permissions are updated when they should be updated. Remove the
getattr and permissions inode callbacks.
- Do not update eventfs_inode attributes on creation of inodes.
The eventfs_inodes attribute field is used to store the permissions
of the directories and files for when their corresponding inodes
are freed and are created again. But when the creation of the inodes
happen, the eventfs_inode attributes are recalculated. The
recalculation should only happen when the permissions change for
a given file or directory. Currently, the attribute changes are
just being set to their current files so this is not a bug, but
it's unnecessary and error prone. Stop doing that.
- The events directory inode is created once when the events directory
is created and deleted when it is deleted. It is now updated on
remount and when the user changes the permissions. There's no need
to use the eventfs_inode of the events directory to store the
events directory permissions. But using it to store the default
permissions for the files within the directory that have not been
updated by the user can simplify the code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZk+0ohQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtWOAQCSdEsWYiNcFBqvKp1kSI+dH1sKfur3
CAoe1trzDEdv/gEAsFkophR9OBzO193in4ZQYNKdEDfeaicEaDctzLxlkwY=
=9zqq
-----END PGP SIGNATURE-----
Merge tag 'trace-tracefs-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracefs/eventfs updates from Steven Rostedt:
"Bug fixes:
- The eventfs directories need to have unique inode numbers. Make
sure that they do not get the default file inode number.
- Update the inode uid and gid fields on remount.
When a remount happens where a uid and/or gid is specified, all the
tracefs files and directories should get the specified uid and/or
gid. But this can be sporadic when some uids were assigned already.
There's already a list of inodes that are allocated. Just update
their uid and gid fields at the time of remount.
- Update the eventfs_inodes on remount from the top level "events"
descriptor.
There was a bug where not all the eventfs files or directories
where getting updated on remount. One fix was to clear the
SAVED_UID/GID flags from the inode list during the iteration of the
inodes during the remount. But because the eventfs inodes can be
freed when the last referenced is released, not all the
eventfs_inodes were being updated. This lead to the ownership
selftest to fail if it was run a second time (the first time would
leave eventfs_inodes with no corresponding tracefs_inode).
Instead, for eventfs_inodes, only process the "events"
eventfs_inode from the list iteration, as it is guaranteed to have
a tracefs_inode (it's never freed while the "events" directory
exists). As it has a list of its children, and the children have a
list of their children, just iterate all the eventfs_inodes from
the "events" descriptor and it is guaranteed to get all of them.
- Clear the EVENT_INODE flag from the tracefs_drop_inode() callback.
Currently the EVENTFS_INODE FLAG is cleared in the tracefs_d_iput()
callback. But this is the wrong location. The iput() callback is
called when the last reference to the dentry inode is hit. There
could be a case where two dentry's have the same inode, and the
flag will be cleared prematurely. The flag needs to be cleared when
the last reference of the inode is dropped and that happens in the
inode's drop_inode() callback handler.
Cleanups:
- Consolidate the creation of a tracefs_inode for an eventfs_inode
A tracefs_inode is created for both files and directories of the
eventfs system. It is open coded. Instead, consolidate it into a
single eventfs_get_inode() function call.
- Remove the eventfs getattr and permission callbacks.
The permissions for the eventfs files and directories are updated
when the inodes are created, on remount, and when the user sets
them (via setattr). The inodes hold the current permissions so
there is no need to have custom getattr or permissions callbacks as
they will more likely cause them to be incorrect. The inode's
permissions are updated when they should be updated. Remove the
getattr and permissions inode callbacks.
- Do not update eventfs_inode attributes on creation of inodes.
The eventfs_inodes attribute field is used to store the permissions
of the directories and files for when their corresponding inodes
are freed and are created again. But when the creation of the
inodes happen, the eventfs_inode attributes are recalculated. The
recalculation should only happen when the permissions change for a
given file or directory. Currently, the attribute changes are just
being set to their current files so this is not a bug, but it's
unnecessary and error prone. Stop doing that.
- The events directory inode is created once when the events
directory is created and deleted when it is deleted. It is now
updated on remount and when the user changes the permissions.
There's no need to use the eventfs_inode of the events directory to
store the events directory permissions. But using it to store the
default permissions for the files within the directory that have
not been updated by the user can simplify the code"
* tag 'trace-tracefs-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Do not use attributes for events directory
eventfs: Cleanup permissions in creation of inodes
eventfs: Remove getattr and permission callbacks
eventfs: Consolidate the eventfs_inode update in eventfs_get_inode()
tracefs: Clear EVENT_INODE flag in tracefs_drop_inode()
eventfs: Update all the eventfs_inodes from the events descriptor
tracefs: Update inode permissions on remount
eventfs: Keep the directories from having the same inode number as files
|
||
Friedrich Vock
|
44382b3ed6 |
bpf: Fix potential integer overflow in resolve_btfids
err is a 32-bit integer, but elf_update returns an off_t, which is 64-bit
at least on 64-bit platforms. If symbols_patch is called on a binary between
2-4GB in size, the result will be negative when cast to a 32-bit integer,
which the code assumes means an error occurred. This can wrongly trigger
build failures when building very large kernel images.
Fixes:
|
||
Tetsuo Handa
|
b794918961 |
dma-buf/sw-sync: don't enable IRQ from sync_print_obj()
Since commit |
||
David S. Miller
|
0b4f5add9f |
Merge branch 'mlx5-fixes'
Tariq Toukan says:
====================
mlx5 fixes 24-05-22
This patchset provides bug fixes to mlx5 core and Eth drivers.
Series generated against:
commit
|
||
Gal Pressman
|
83fea49f27 |
net/mlx5e: Fix UDP GSO for encapsulated packets
When the skb is encapsulated, adjust the inner UDP header instead of the
outer one, and account for UDP header (instead of TCP) in the inline
header size calculation.
Fixes:
|
||
Carolina Jubran
|
5c74195d5d |
net/mlx5e: Use rx_missed_errors instead of rx_dropped for reporting buffer exhaustion
Previously, the driver incorrectly used rx_dropped to report device
buffer exhaustion.
According to the documentation, rx_dropped should not be used to count
packets dropped due to buffer exhaustion, which is the purpose of
rx_missed_errors.
Use rx_missed_errors as intended for counting packets dropped due to
buffer exhaustion.
Fixes:
|
||
Rahul Rameshbabu
|
f55cd31287 |
net/mlx5e: Do not use ptp structure for tx ts stats when not initialized
The ptp channel instance is only initialized when ptp traffic is first
processed by the driver. This means that there is a window in between when
port timestamping is enabled and ptp traffic is sent where the ptp channel
instance is not initialized. Accessing statistics during this window will
lead to an access violation (NULL + member offset). Check the validity of
the instance before attempting to query statistics.
BUG: unable to handle page fault for address: 0000000000003524
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 109dfc067 P4D 109dfc067 PUD 1064ef067 PMD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 420 Comm: ethtool Not tainted 6.9.0-rc2-rrameshbabu+ #245
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/204
RIP: 0010:mlx5e_stats_ts_get+0x4c/0x130
<snip>
Call Trace:
<TASK>
? show_regs+0x60/0x70
? __die+0x24/0x70
? page_fault_oops+0x15f/0x430
? do_user_addr_fault+0x2c9/0x5c0
? exc_page_fault+0x63/0x110
? asm_exc_page_fault+0x27/0x30
? mlx5e_stats_ts_get+0x4c/0x130
? mlx5e_stats_ts_get+0x20/0x130
mlx5e_get_ts_stats+0x15/0x20
<snip>
Fixes:
|
||
|
Rahul Rameshbabu
|
9a52f6d44f |
net/mlx5e: Fix IPsec tunnel mode offload feature check
Remove faulty check disabling checksum offload and GSO for offload of
simple IPsec tunnel L4 traffic. Comment previously describing the deleted
code incorrectly claimed the check prevented double tunnel (or three layers
of ip headers).
Fixes:
|
||
|
Rahul Rameshbabu
|
16d66a4fa8 |
net/mlx5: Use mlx5_ipsec_rx_status_destroy to correctly delete status rules
rx_create no longer allocates a modify_hdr instance that needs to be
cleaned up. The mlx5_modify_header_dealloc call will lead to a NULL pointer
dereference. A leak in the rules also previously occurred since there are
now two rules populated related to status.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 109907067 P4D 109907067 PUD 116890067 PMD 0
Oops: 0000 [#1] SMP
CPU: 1 PID: 484 Comm: ip Not tainted 6.9.0-rc2-rrameshbabu+ #254
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:mlx5_modify_header_dealloc+0xd/0x70
<snip>
Call Trace:
<TASK>
? show_regs+0x60/0x70
? __die+0x24/0x70
? page_fault_oops+0x15f/0x430
? free_to_partial_list.constprop.0+0x79/0x150
? do_user_addr_fault+0x2c9/0x5c0
? exc_page_fault+0x63/0x110
? asm_exc_page_fault+0x27/0x30
? mlx5_modify_header_dealloc+0xd/0x70
rx_create+0x374/0x590
rx_add_rule+0x3ad/0x500
? rx_add_rule+0x3ad/0x500
? mlx5_cmd_exec+0x2c/0x40
? mlx5_create_ipsec_obj+0xd6/0x200
mlx5e_accel_ipsec_fs_add_rule+0x31/0xf0
mlx5e_xfrm_add_state+0x426/0xc00
<snip>
Fixes:
|
||
|
Gal Pressman
|
1b9f86c6d5 |
net/mlx5: Fix MTMP register capability offset in MCAM register
The MTMP register (0x900a) capability offset is off-by-one, move it to
the right place.
Fixes:
|
||
Tariq Toukan
|
fca3b47918 |
net/mlx5: Do not query MPIR on embedded CPU function
A proper query to MPIR needs to set the correct value in the depth field.
On embedded CPU this value is not necessarily zero. As there is no real
use case for multi-PF netdev on the embedded CPU of the smart NIC, block
this option.
This fixes the following failure:
ACCESS_REG(0x805) op_mod(0x1) failed, status bad system state(0x4), syndrome (0x685f19), err(-5)
Fixes:
|
||
Maher Sanalla
|
51ef9305b8 |
net/mlx5: Lag, do bond only if slaves agree on roce state
Currently, the driver does not enforce that lag bond slaves must have
matching roce capabilities. Yet, in mlx5_do_bond(), the driver attempts
to enable roce on all vports of the bond slaves, causing the following
syndrome when one slave has no roce fw support:
mlx5_cmd_out_err:809:(pid 25427): MODIFY_NIC_VPORT_CONTEXT(0×755) op_mod(0×0)
failed, status bad parameter(0×3), syndrome (0xc1f678), err(-22)
Thus, create HW lag only if bond's slaves agree on roce state,
either all slaves have roce support resulting in a roce lag bond,
or none do, resulting in a raw eth bond.
Fixes:
|
||
Christian Brauner
|
712182b67e |
swap: yield device immediately
Otherwise we can cause spurious EBUSY issues when trying to mount the rootfs later on. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218845 Reported-by: Petri Kaukasoina <petri.kaukasoina@tuni.fi> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
David Howells
|
c596bea145 |
netfs: Fix setting of BDP_ASYNC from iocb flags
Fix netfs_perform_write() to set BDP_ASYNC if IOCB_NOWAIT is set rather
than if IOCB_SYNC is not set. It reflects asynchronicity in the sense of
not waiting rather than synchronicity in the sense of not returning until
the op is complete.
Without this, generic/590 fails on cifs in strict caching mode with a
complaint that one of the writes fails with EAGAIN. The test can be
distilled down to:
mount -t cifs /my/share /mnt -ostuff
xfs_io -i -c 'falloc 0 8191M -c fsync -f /mnt/file
xfs_io -i -c 'pwrite -b 1M -W 0 8191M' /mnt/file
Fixes:
|
||
Fedor Pchelkin
|
65bea99537 |
signalfd: drop an obsolete comment
Commit
|
||
|
Fedor Pchelkin
|
f826bc9d6f |
signalfd: fix error return code
If anon_inode_getfile() fails, return appropriate error code. This looks
like a single typo: the similar code changes in timerfd and userfaultfd
are okay.
Found by Linux Verification Center (linuxtesting.org).
Fixes:
|
||
Xu Yang
|
4e527d5841 |
iomap: fault in smaller chunks for non-large folio mappings
Since commit ( |
||
|
Xu Yang
|
79c1374548 |
filemap: add helper mapping_max_folio_size()
Add mapping_max_folio_size() to get the maximum folio size for this
pagecache mapping.
Fixes:
|
||
|
David Howells
|
2c6b531020 |
netfs: Fix AIO error handling when doing write-through
If an error occurs whilst we're doing an AIO write in write-through mode,
we may end up calling ->ki_complete() *and* returning an error from
->write_iter(). This can result in either a UAF (the ->ki_complete() func
pointer may get overwritten, for example) or a refcount underflow in
io_submit() as ->ki_complete is called twice.
Fix this by making netfs_end_writethrough() - and thus
netfs_perform_write() - unconditionally return -EIOCBQUEUED if we're doing
an AIO write and wait for completion if we're not.
Fixes:
|