The NLM_F_ACK flag is ignored for nfnetlink batch begin and end
messages. This is a problem for ynl which wants to receive an ack for
every message it sends, not just the commands in between the begin/end
messages.
Add processing for ACKs for begin/end messages and provide responses
when requested.
I have checked that iproute2, pyroute2 and systemd are unaffected by
this change since none of them use NLM_F_ACK for batch begin/end.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a "--multi <do-op> <json>" command line to ynl that makes it
possible to add several operations to a single netlink request payload.
The --multi command line option is repeated for each operation.
This is used by the nftables family for transaction batches. For
example:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi batch-begin '{"res-id": 10}' \
--multi newtable '{"name": "test", "nfgen-family": 1}' \
--multi newchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--multi batch-end '{"res-id": 10}'
[None, None, None, None]
It can also be used for bundling get requests:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nftables.yaml \
--multi gettable '{"name": "test", "nfgen-family": 1}' \
--multi getchain '{"name": "chain", "table": "test", "nfgen-family": 1}' \
--output-json
[{"name": "test", "use": 1, "handle": 1, "flags": [],
"nfgen-family": 1, "version": 0, "res-id": 2},
{"table": "test", "name": "chain", "handle": 1, "use": 0,
"nfgen-family": 1, "version": 0, "res-id": 2}]
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NetlinkProtocol.decode() was looking up ops by response value which breaks
when it is used for extack decoding of directional ops. Instead, pass
the op to decode().
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a spec for nftables that has nearly complete coverage of the ops,
but limited coverage of rule types and subexpressions.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240418104737.77914-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide the CLK framework callbacks related to get/set clock duty cycle if
the related SCMI clock supports OEM extended configurations.
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240415163649.895268-6-cristian.marussi@arm.com
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Some exposed SCMI Clocks could be marked as non-supporting re-parenting
changes.
Configure a clk_ops descriptor which does not provide the re-parenting
callbacks for such clocks when registering with CLK framework.
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240415163649.895268-5-cristian.marussi@arm.com
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Some exposed SCMI Clocks could be marked as non-supporting rate changes.
Configure a clk_ops descriptors which does not provide the rate change
callbacks for such clocks when registering with CLK framework.
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240415163649.895268-4-cristian.marussi@arm.com
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Some exposed SCMI Clocks could be marked as non-supporting state changes.
Configure a clk_ops descriptor which does not provide the state change
callbacks for such clocks when registering with CLK framework.
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240415163649.895268-3-cristian.marussi@arm.com
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
SCMI Clocks descriptors expose an increasing number of properties, thing
which, in turn, leads to a varying set of supported CLK operations to be
associated with each clock.
Providing statically pre-defined CLK operations structs for all the
possible combinations of allowed clock features is becoming cumbersome and
error-prone.
Allocate the per-clock operations descriptors dynamically and populate it
with the strictly needed set of operations depending on the advertised
clock properties: one descriptor is created for each distinct combination
of clock operations, so minimizing the number of clk_ops structures to the
strictly minimum needed.
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240415163649.895268-2-cristian.marussi@arm.com
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pavel Begunkov says:
====================
implement io_uring notification (ubuf_info) stacking (net part)
To have per request buffer notifications each zerocopy io_uring send
request allocates a new ubuf_info. However, as an skb can carry only
one uarg, it may force the stack to create many small skbs hurting
performance in many ways.
The patchset implements notification, i.e. an io_uring's ubuf_info
extension, stacking. It attempts to link ubuf_info's into a list,
allowing to have multiple of them per skb.
liburing/examples/send-zerocopy shows up 6 times performance improvement
for TCP with 4KB bytes per send, and levels it with MSG_ZEROCOPY. Without
the patchset it requires much larger sends to utilise all potential.
bytes | before | after (Kqps)
1200 | 195 | 1023
4000 | 193 | 1386
8000 | 154 | 1058
====================
Link: https://lore.kernel.org/all/cover.1713369317.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZizJ
-----END PGP SIGNATURE-----
Merge tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Five ksmbd server fixes, most also for stable:
- rename fix
- two fixes for potential out of bounds
- fix for connections from MacOS (padding in close response)
- fix for when to enable persistent handles"
* tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: add continuous availability share parameter
ksmbd: common: use struct_group_attr instead of struct_group for network_open_info
ksmbd: clear RENAME_NOREPLACE before calling vfs_rename
ksmbd: validate request buffer size in smb2_allocate_rsp_buf()
ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf
At the moment an skb can only have one ubuf_info associated with it,
which might be a performance problem for zerocopy sends in cases like
TCP via io_uring. Add a callback for assigning ubuf_info to skb, this
way we will implement smarter assignment later like linking ubuf_info
together.
Note, it's an optional callback, which should be compatible with
skb_zcopy_set(), that's because the net stack might potentially decide
to clone an skb and take another reference to ubuf_info whenever it
wishes. Also, a correct implementation should always be able to bind to
an skb without prior ubuf_info, otherwise we could end up in a situation
when the send would not be able to progress.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/all/b7918aadffeb787c84c9e72e34c729dc04f3a45d.1713369317.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We'll need to associate additional callbacks with ubuf_info, introduce
a structure holding ubuf_info callbacks. Apart from a more smarter
io_uring notification management introduced in next patches, it can be
used to generalise msg_zerocopy_put_abort() and also store
->sg_from_iter, which is currently passed in struct msghdr.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/all/a62015541de49c0e2a8a0377a1d5d0a5aeb07016.1713369317.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If vfio_irq_ctx_alloc() failed will lead to 'name' memory leak.
Fixes: 18c198c96a ("vfio/pci: Create persistent INTx handler")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240415015029.3699844-1-yebin10@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Create a link back to the vfio_pci_core_device on the eventfd context
object to avoid lookups in the interrupt path. The context is known
valid in the interrupt handler.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240401195406.3720453-2-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Email to Diana is bouncing. I've reached out through other channels
but not been successful for a couple months. Lore shows no email from
Diana for approximately 18 months. Mark this driver as orphaned.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240401170224.3700774-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When KUnit tests are enabled, under very big kernel configurations
(e.g. `allyesconfig`), we can trigger a `rustdoc` ICE [1]:
RUSTDOC TK rust/kernel/lib.rs
error: the compiler unexpectedly panicked. this is a bug.
The reason is that this build step has a duplicated `@rustc_cfg` argument,
which contains the kernel configuration, and thus a lot of arguments. The
factor 2 happens to be enough to reach the ICE.
Thus remove the unneeded `@rustc_cfg`. By doing so, we clean up the
command and workaround the ICE.
The ICE has been fixed in the upcoming Rust 1.79 [2].
Cc: stable@vger.kernel.org
Fixes: a66d733da8 ("rust: support running Rust documentation tests as KUnit ones")
Link: https://github.com/rust-lang/rust/issues/122722 [1]
Link: https://github.com/rust-lang/rust/pull/122840 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240422091215.526688-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The thread that calls the module initialisation code when a module is
loaded is not guaranteed [in fact, it is unlikely] to be the same one
that calls the module cleanup code on module unload, therefore, `Module`
implementations must be `Send` to account for them moving from one
thread to another implicitly.
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Cc: stable@vger.kernel.org # 6.8.x: df70d04d56: rust: phy: implement `Send` for `Registration`
Cc: stable@vger.kernel.org
Fixes: 247b365dc8 ("rust: add `kernel` crate")
Link: https://lore.kernel.org/r/20240328195457.225001-3-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Stop using the table inside the EXTI driver and list in DT the mapping
between EXTI events and its parent interrupts.
By switching away from using the internal table, there is no need anymore
to use the specific compatible "st,stm32mp13-exti", which was introduced to
select the proper internal table.
Convert the driver's table for stm32mp131 to the DT property
interrupts-extended.
Switch the compatible string to the generic "st,stm32mp1-exti", in place of
the specific "st,stm32mp13-exti".
Older DT using compatible "st,stm32mp13-exti" will still work as the driver
remains backward compatible.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240415134926.1254428-10-antonio.borneo@foss.st.com
Stop using the table inside the EXTI driver and list in DT the mapping
between EXTI events and its parent interrupts.
Convert the driver's table for stm32mp151 to the DT property
interrupts-extended.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240415134926.1254428-9-antonio.borneo@foss.st.com
EXTI events availability depends on Resource Isolation Framework (RIF)
configuration.
RIF grants access to buses with Compartment ID (CID) filtering, secure and
privilege level. It also assigns EXTI events to one or several processors
(CID, Secure, Privilege).
EXTI events used by Linux must be CID-filtered (EnCIDCFGR.CFEN=1) and
statically assigned to CID1 (EnCIDCFR.CID=CID1).
EXTI events not filling these conditions are marked as reserved and can't
be used by Linux.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240415134926.1254428-7-antonio.borneo@foss.st.com
Secure OS can reserve some EXTI events, marking them as "secure" by setting
the corresponding bit in register SECCFGR (aka TZENR). These events cannot
be used by Linux.
Read the list of reserved events and check it during interrupt domain
allocation.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240415134926.1254428-6-antonio.borneo@foss.st.com
All driver's dependencies for suspend/resume have been fixed long
ago. There are no more reasons to use syscore PM for the part of this
driver related to Cortex-A MPU.
Switch to standard PM using NOIRQ_SYSTEM_SLEEP_PM_OPS, so all the registers
of the interrupt controller get resumed before any irq gets enabled.
A side effect of this change is to drop the only global variable
'stm32_host_data', used to keep the driver's data for syscore_ops. This
makes the driver ready to support multiple EXTI instances.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240415134926.1254428-5-antonio.borneo@foss.st.com
The mapping of EXTI events to its parent interrupt controller is both SoC
and instance dependent.
The current implementation requires adding a new mapping table to the
driver's code and a new compatible for each new EXTI instance.
Check for the presence of the optional interrupts-extended property and use
it to map EXTI events to the parent's interrupts.
For old device trees without the optional interrupts-extended property, the
driver's behavior is unchanged, thus keeps backward compatibility.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240415134926.1254428-4-antonio.borneo@foss.st.com
The mapping of EXTI events to its parent interrupt controller is both SoC
and instance dependent.
The current implementation requires adding a new mapping table to the
driver's code and a new compatible for each new EXTI instance.
To avoid that use the interrupts-extended property to list, for each EXTI
event, the associated parent interrupt.
Co-developed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240415134926.1254428-3-antonio.borneo@foss.st.com
Commit 046a6ee234 ("irqchip: Bulk conversion to
generic_handle_domain_irq()") incorrectly added a leading space character
in the line indentation.
Use only TAB for indentation, removing the leading space.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240415134926.1254428-2-antonio.borneo@foss.st.com
After commit 5bb578a0c1 ("ARM: 9298/1: Drop custom mdesc->handle_irq()")
the function icoll_handle_irq() is only used within irq-mxs.c. So declare
it as static to fix the warning about a missing prototype when building
with W=1.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The current code is using a fixed mapping between the LS7A interrupt source
and the HT interrupt vector. This prevents the utilization of the full
interrupt vector space and therefore limits the number of interrupt source
in a system.
Replace the fixed mapping with a dynamic mapping which allocates a
vector when an interrupt source is set up. This avoids that unused
sources prevent vectors from being used for other devices.
Introduce a mapping table in struct pch_pic, where each interrupt source
will allocate an index as a 'hwirq' number from the table in the order of
application and set table value as interrupt source number. This hwirq
number will be configured as vector in the HT interrupt controller. For an
interrupt source, the validity period of the obtained hwirq will last until
the system reset.
Co-developed-by: Biao Dong <dongbiao@loongson.cn>
Signed-off-by: Biao Dong <dongbiao@loongson.cn>
Co-developed-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240422093830.27212-1-zhangtianyang@loongson.cn
Since whether desc is NULL or desc->percpu_enabled is true, it returns
-EINVAL, check them together, and assign desc->percpu_affinity using a
ternary to simplify the code.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240417085356.3785381-1-ruanjinjie@huawei.com
In preparation for requiring `Send` for `Module` implementations in the
next patch.
Cc: FUJITA Tomonori <fujita.tomonori@gmail.com>
Cc: Trevor Gross <tmgross@umich.edu>
Cc: netdev@vger.kernel.org
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240328195457.225001-2-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Eric Dumazet says:
====================
tcp: avoid sending too small packets
tcp_sendmsg() cooks 'large' skbs, that are later split
if needed from tcp_write_xmit().
After a split, the leftover skb size is smaller than the optimal
size, and this causes a performance drop.
In this series, tcp_grow_skb() helper is added to shift
payload from the second skb in the write queue to the first
skb to always send optimal sized skbs.
This increases TSO efficiency, and decreases number of ACK
packets.
====================
Link: https://lore.kernel.org/r/20240418214600.1291486-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While investigating TCP performance, I found that TCP would
sometimes send big skbs followed by a single MSS skb,
in a 'locked' pattern.
For instance, BIG TCP is enabled, MSS is set to have 4096 bytes
of payload per segment. gso_max_size is set to 181000.
This means that an optimal TCP packet size should contain
44 * 4096 = 180224 bytes of payload,
However, I was seeing packets sizes interleaved in this pattern:
172032, 8192, 172032, 8192, 172032, 8192, <repeat>
tcp_tso_should_defer() heuristic is defeated, because after a split of
a packet in write queue for whatever reason (this might be a too small
CWND or a small enough pacing_rate),
the leftover packet in the queue is smaller than the optimal size.
It is time to try to make 'leftover packets' bigger so that
tcp_tso_should_defer() can give its full potential.
After this patch, we can see the following output:
14:13:34.009273 IP6 sender > receiver: Flags [P.], seq 4048380:4098360, ack 1, win 256, options [nop,nop,TS val 3425678144 ecr 1561784500], length 49980
14:13:34.010272 IP6 sender > receiver: Flags [P.], seq 4098360:4148340, ack 1, win 256, options [nop,nop,TS val 3425678145 ecr 1561784501], length 49980
14:13:34.011271 IP6 sender > receiver: Flags [P.], seq 4148340:4198320, ack 1, win 256, options [nop,nop,TS val 3425678146 ecr 1561784502], length 49980
14:13:34.012271 IP6 sender > receiver: Flags [P.], seq 4198320:4248300, ack 1, win 256, options [nop,nop,TS val 3425678147 ecr 1561784503], length 49980
14:13:34.013272 IP6 sender > receiver: Flags [P.], seq 4248300:4298280, ack 1, win 256, options [nop,nop,TS val 3425678148 ecr 1561784504], length 49980
14:13:34.014271 IP6 sender > receiver: Flags [P.], seq 4298280:4348260, ack 1, win 256, options [nop,nop,TS val 3425678149 ecr 1561784505], length 49980
14:13:34.015272 IP6 sender > receiver: Flags [P.], seq 4348260:4398240, ack 1, win 256, options [nop,nop,TS val 3425678150 ecr 1561784506], length 49980
14:13:34.016270 IP6 sender > receiver: Flags [P.], seq 4398240:4448220, ack 1, win 256, options [nop,nop,TS val 3425678151 ecr 1561784507], length 49980
14:13:34.017269 IP6 sender > receiver: Flags [P.], seq 4448220:4498200, ack 1, win 256, options [nop,nop,TS val 3425678152 ecr 1561784508], length 49980
14:13:34.018276 IP6 sender > receiver: Flags [P.], seq 4498200:4548180, ack 1, win 256, options [nop,nop,TS val 3425678153 ecr 1561784509], length 49980
14:13:34.019259 IP6 sender > receiver: Flags [P.], seq 4548180:4598160, ack 1, win 256, options [nop,nop,TS val 3425678154 ecr 1561784510], length 49980
With 200 concurrent flows on a 100Gbit NIC, we can see a reduction
of TSO packets (and ACK packets) of about 30 %.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240418214600.1291486-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_write_xmit() calls tcp_init_tso_segs()
to set gso_size and gso_segs on the packet.
tcp_init_tso_segs() requires the stack to maintain
an up to date tcp_skb_pcount(), and this makes sense
for packets in rtx queue. Not so much for packets
still in the write queue.
In the following patch, we don't want to deal with
tcp_skb_pcount() when moving payload from 2nd
skb to 1st skb in the write queue.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240418214600.1291486-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_cwnd_test() has a special handing for the last packet in
the write queue if it is smaller than one MSS and has the FIN flag.
This is in violation of TCP RFC, and seems quite dubious.
This packet can be sent only if the current CWND is bigger
than the number of packets in flight.
Making tcp_cwnd_test() result independent of the first skb
in the write queue is needed for the last patch of the series.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240418214600.1291486-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5e per-queue coalescing
This patchset adds ethtool per-queue coalescing support for the mlx5e
driver.
The series introduce some changes needed as preparations for the final
patch which adds the support and implements the callbacks. Main
changes:
- DIM code movements into its own header file.
- Switch to dynamic allocation of the DIM struct in the RQs/SQs.
- Allow coalescing config change without channels reset when possible.
====================
Link: https://lore.kernel.org/r/20240419080445.417574-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CQE mode or DIM state is changed, gracefully reconfigure channels to
handle new configuration. Previously, would create new channels that would
reflect the changes rather than update the original channels.
Co-developed-by: Nabil S. Alramli <dev@nalramli.com>
Signed-off-by: Nabil S. Alramli <dev@nalramli.com>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240419080445.417574-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make it possible for the DIM structure to be torn down while an SQ or RQ is
still active. Changing the CQ period mode is an example where the previous
sampling done with the DIM structure would need to be invalidated.
Co-developed-by: Nabil S. Alramli <dev@nalramli.com>
Signed-off-by: Nabil S. Alramli <dev@nalramli.com>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240419080445.417574-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use core DIM CQ period mode enum values for the CQ parameter for the period
mode. Translate the value to the specific mlx5 device constant for the
selected period mode when creating a CQ. Avoid needing to translate mlx5
device constants to DIM constants for core DIM functionality.
Co-developed-by: Nabil S. Alramli <dev@nalramli.com>
Signed-off-by: Nabil S. Alramli <dev@nalramli.com>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240419080445.417574-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a header specifically for DIM-related declarations. Move existing
DIM-specific functionality from en.h. Future DIM-related functionality will
be declared in en/dim.h in subsequent patches.
Co-developed-by: Nabil S. Alramli <dev@nalramli.com>
Signed-off-by: Nabil S. Alramli <dev@nalramli.com>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240419080445.417574-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pawel Dembicki says:
====================
net: dsa: vsc73xx: convert to PHYLINK and do some cleanup
This patch series is a result of splitting a larger patch series [0],
where some parts needed to be refactored.
The first patch switches from a poll loop to read_poll_timeout.
The second patch is a simple conversion to phylink because adjust_link
won't work anymore.
The third patch is preparation for future use. Using the
"phy_interface_mode_is_rgmii" macro allows for the proper recognition
of all RGMII modes.
Patches 4-5 involve some cleanup: The fourth patch introduces
a definition with the maximum number of ports to avoid using
magic numbers. The next one fills in documentation.
[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=841034&state=%2A&archive=both
====================
Link: https://lore.kernel.org/r/20240417205048.3542839-1-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds updates to the documentation describing the structures
used in vsc73xx. This will help prevent kdoc-related issues in the future.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://lore.kernel.org/r/20240417205048.3542839-6-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch introduces a new define: VSC73XX_MAX_NUM_PORTS, which can be
used in the future instead of a hardcoded value.
Currently, the only hardcoded value is vsc->ds->num_ports. It is being
replaced with the new define.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240417205048.3542839-5-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's preparation for future use. At this moment, the RGMII port is used
only for a connection to the MAC interface, but in the future, someone
could connect a PHY to it. Using the "phy_interface_mode_is_rgmii" macro
allows for the proper recognition of all RGMII modes.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240417205048.3542839-4-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch replaces the adjust_link api with the phylink apis that provide
equivalent functionality.
The remaining functionality from the adjust_link is now covered in the
mac_link_* and mac_config from phylink_mac_ops structure.
Removes:
.adjust_link
Adds phylink_mac_ops structure:
.mac_config
.mac_link_up
.mac_link_down
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://lore.kernel.org/r/20240417205048.3542839-3-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
