Add a new driver for the PD692x0 I2C Power Sourcing Equipment controller.
This driver only support i2c communication for now.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-12-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Integrate the regulator framework to the PSE framework for enhanced
access to features such as voltage, power measurement, and limits, which
are akin to regulators. Additionally, PSE features like port priorities
could potentially enhance the regulator framework. Note that this
integration introduces some implementation complexity, including wrapper
callbacks, but the potential benefits make it worthwhile.
Regulator are using enable counter with specific behavior.
Two calls to regulator_disable will trigger kernel warnings.
If the counter exceeds one, regulator_disable call won't disable the
PSE PI. These behavior isn't suitable for PSE control.
Added a boolean 'enabled' state to prevent multiple calls to
regulator_enable/disable. These calls will only be called from PSE
framework as it won't have any regulator children, therefore no mutex are
needed to safeguards this boolean.
regulator_get needs the consumer device pointer. Use PSE as regulator
provider and consumer device until we have RJ45 ports represented in
the Kernel.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-10-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement setup_pi_matrix callback to configure the PSE PI matrix. This
functionality is invoked before registering the PSE and following the core
parsing of the pse_pis devicetree subnode.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-9-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PSE PI setup may encompass multiple PSE controllers or auxiliary circuits
that collectively manage power delivery to one Ethernet port.
Such configurations might support a range of PoE standards and require
the capability to dynamically configure power delivery based on the
operational mode (e.g., PoE2 versus PoE4) or specific requirements of
connected devices. In these instances, a dedicated PSE PI node becomes
essential for accurately documenting the system architecture. This node
would serve to detail the interactions between different PSE controllers,
the support for various PoE modes, and any additional logic required to
coordinate power delivery across the network infrastructure.
The old usage of "#pse-cells" is unsuficient as it carries only the PSE PI
index information.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-8-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Power Sourcing Equipment Power Interface (PSE PI) plays a pivotal role
in the architecture of Power over Ethernet (PoE) systems. It is essentially
a blueprint that outlines how one or multiple power sources are connected
to the eight-pin modular jack, commonly known as the Ethernet RJ45 port.
This connection scheme is crucial for enabling the delivery of power
alongside data over Ethernet cables.
This patch adds support for getting the PSE controller node through PSE PI
device subnode.
This supports adds a way to get the PSE PI id from the pse_pi devicetree
subnode of a PSE controller node simply by reading the reg property.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-7-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The functions mipi_dsi_compression_mode() and
mipi_dsi_picture_parameter_set() return 0-or-error rather than a buffer
size. Follow example of other similar MIPI DSI functions and use int
return type instead of size_t.
Fixes: f4dea1aaa9 ("drm/dsi: add helpers for DSI compression mode and PPS packets")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408-lg-sw43408-panel-v5-2-4e092da22991@linaro.org
As I add support for PoE in PSE networking subsystem it seems legitimate
to be added to the maintainers.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-6-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove podl from the attribute prefix to prepare the support of PoE pse
netlink spec.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-4-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce an enumeration to define PSE types (C33 or PoDL),
utilizing a bitfield for potential future support of both types.
Include 'pse_get_types' helper for external access to PSE type info.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-2-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the current PSE interface for Ethernet Power Equipment, support is
limited to PoDL. This patch extends the interface to accommodate the
objects specified in IEEE 802.3-2022 145.2 for Power sourcing
Equipment (PSE).
The following objects are now supported and considered mandatory:
- IEEE 802.3-2022 30.9.1.1.5 aPSEPowerDetectionStatus
- IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState
- IEEE 802.3-2022 30.9.1.2.1 aPSEAdminControl
To avoid confusion between "PoDL PSE" and "PoE PSE", which have similar
names but distinct values, we have followed the suggestion of Oleksij
Rempel and Andrew Lunn to maintain separate naming schemes for each,
using c33 (clause 33) prefix for "PoE PSE".
You can find more details in the discussion threads here:
https://lore.kernel.org/netdev/20230912110637.GI780075@pengutronix.de/https://lore.kernel.org/netdev/2539b109-72ad-470a-9dae-9f53de4f64ec@lunn.ch/
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-1-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit a672af9139.
By now it is not used for building tools/perf, but Stephen Rothwell
reported that when building on a O= directory that had been built with
torvalds/master and this perf build command line:
$ make -C tools/perf -f Makefile.perf -s -O -j60 O=/home/sfr/next/perf NO_BPF_SKEL=1
If we then merge perf-tools-next, as he did for linux-next, then we end
up with a build failure for libbpf:
PERF_VERSION = 6.9.rc3.g42c4635c8dee
make[3]: *** No rule to make target '/home/sfr/next/next/tools/include/uapi/linux/stat.h', needed by '/home/sfr/next/perf/libbpf/staticobjs/libbpf.o'. Stop.
make[2]: *** [Makefile:157: /home/sfr/next/perf/libbpf/staticobjs/libbpf-in.o] Error 2
make[1]: *** [Makefile.perf:892: /home/sfr/next/perf/libbpf/libbpf.a] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile.perf:264: sub-make] Error 2
This needs to be further investigated to figure out how to check if
libbpf really needs something that is in that
tools/include/uapi/linux/stat.h file and if not to remove that file in a
way that we don't break the build in any situation, to avoid requiring
doing a 'make clean'.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # PowerPC le incermental build
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20240413124340.4d48c6d8@canb.auug.org.au
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a common failure mode when probing userspace C++ code (where the
mangling adds significant length to the symbol names).
Prior to this patch, only a very generic error message is produced,
making the user guess at what the issue is.
Signed-off-by: Dima Kogan <dima@secretsauce.net>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240416045533.162692-3-dima@secretsauce.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In several places we had
char buf[64];
...
snprintf(buf, 64, ...);
This patch changes it to
char buf[64];
...
snprintf(buf, sizeof(buf), ...);
so the "64" is only stated once.
Signed-off-by: Dima Kogan <dima@secretsauce.net>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240416045533.162692-2-dima@secretsauce.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hardware counter and event information could be used to help creating event
groups that better utilize hardware counters and improve multiplexing.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Weilin Wang <weilin.wang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Link: https://lore.kernel.org/r/20240412210756.309828-2-weilin.wang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These tests record in a mode that includes kernel trace but look for
samples of a userspace process. This makes them sensitive to any kernel
compilation options that increase the amount of time spent in the
kernel. If the trace buffer is completely filled before userspace is
reached then the test will fail. Double the buffer size to fix this.
The other tests in the same file aren't sensitive to this for various
reasons, for example the iterate devices test filters by userspace trace
only. But in order to keep coverage of all the modes, increase the
buffer size rather than filtering by userspace for the basic tests.
Fixes: d1efa4a0a6 ("perf cs-etm: Add separate decode paths for timeless and per-thread modes")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240326113749.257250-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When cross-compiling perf with libelf, the following error occurred:
In file included from tests/genelf.c:14:
tests/../util/genelf.h:50:2: error: #error "unsupported architecture"
50 | #error "unsupported architecture"
| ^~~~~
tests/../util/genelf.h:59:5: warning: "GEN_ELF_CLASS" is not defined, evaluates to 0 [-Wundef]
59 | #if GEN_ELF_CLASS == ELFCLASS64
Fix this by adding GEN-ELF-ARCH and GEN-ELF-CLASS definitions for rv32.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Link: https://lore.kernel.org/r/20240415095532.4930-1-cp0613@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
L1D_CACHE_INVAL overcounts in certain situations. See AC03_CPU_41 and
AC04_CPU_1 for more details. Mark the event impacted by the errata.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240408214022.541839-1-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactor test to better enable sharing of logic, to give an idea of
progress and introduce test functions. Add test of measuring both
cycles and cycles:b simultaneously.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416170014.985191-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Document that 'b' is used as a modifier to make an event use a BPF
counter.
Fixes: 01bd8efcec ("perf stat: Introduce ':b' modifier")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416170014.985191-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When both hwmon and hwmon drvdata (on which hwmon depends) are device
managed resources, the expectation, on device unbind, is that hwmon will be
released before drvdata. However, in i915 there are two separate code
paths, which both release either drvdata or hwmon and either can be
released before the other. These code paths (for device unbind) are as
follows (see also the bug referenced below):
Call Trace:
release_nodes+0x11/0x70
devres_release_group+0xb2/0x110
component_unbind_all+0x8d/0xa0
component_del+0xa5/0x140
intel_pxp_tee_component_fini+0x29/0x40 [i915]
intel_pxp_fini+0x33/0x80 [i915]
i915_driver_remove+0x4c/0x120 [i915]
i915_pci_remove+0x19/0x30 [i915]
pci_device_remove+0x32/0xa0
device_release_driver_internal+0x19c/0x200
unbind_store+0x9c/0xb0
and
Call Trace:
release_nodes+0x11/0x70
devres_release_all+0x8a/0xc0
device_unbind_cleanup+0x9/0x70
device_release_driver_internal+0x1c1/0x200
unbind_store+0x9c/0xb0
This means that in i915, if use devm, we cannot gurantee that hwmon will
always be released before drvdata. Which means that we have a uaf if hwmon
sysfs is accessed when drvdata has been released but hwmon hasn't.
The only way out of this seems to be do get rid of devm_ and release/free
everything explicitly during device unbind.
v2: Change commit message and other minor code changes
v3: Cleanup from i915_hwmon_register on error (Armin Wolf)
v4: Eliminate potential static analyzer warning (Rodrigo)
Eliminate fetch_and_zero (Jani)
v5: Restore previous logic for ddat_gt->hwmon_dev error return (Andi)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10366
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417145646.793223-1-ashutosh.dixit@intel.com
Convert NVIDIA Tegra20 DAS (Digital Audio Switch) binding to schema.
Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240418163326.58365-1-sheharyaar48@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using davinci-mcasp as CPU DAI with simple-card, there are some
conditions that cause simple-card to finish registering a sound card before
davinci-mcasp finishes registering all sound components. This creates a
non-working sound card from userspace with no problem indication apart
from not being able to play/record audio on a PCM stream. The issue
arises during simultaneous probe execution of both drivers. Specifically,
the simple-card driver, awaiting a CPU DAI, proceeds as soon as
davinci-mcasp registers its DAI. However, this process can lead to the
client mutex lock (client_mutex in soc-core.c) being held or davinci-mcasp
being preempted before PCM DMA registration on davinci-mcasp finishes.
This situation occurs when the probes of both drivers run concurrently.
Below is the code path for this condition. To solve the issue, defer
davinci-mcasp CPU DAI registration to the last step in the audio part of
it. This way, simple-card CPU DAI parsing will be deferred until all
audio components are registered.
Fail Code Path:
simple-card.c: probe starts
simple-card.c: simple_dai_link_of: simple_parse_node(..,cpu,..) returns EPROBE_DEFER, no CPU DAI yet
davinci-mcasp.c: probe starts
davinci-mcasp.c: devm_snd_soc_register_component() register CPU DAI
simple-card.c: probes again, finish CPU DAI parsing and call devm_snd_soc_register_card()
simple-card.c: finish probe
davinci-mcasp.c: *dma_pcm_platform_register() register PCM DMA
davinci-mcasp.c: probe finish
Cc: stable@vger.kernel.org
Fixes: 9fbd58cf4a ("ASoC: davinci-mcasp: Choose PCM driver based on configured DMA controller")
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240417184138.1104774-1-jpaulo.silvagoncalves@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When creating controls attached to widgets, there are a lot of rules if
they get their name prefixed with widget name or not. Due to that
controls ended up with weirdly looking names like "ssp0_fe DSP Volume",
while topology set it to "DSP Volume".
Fix this by setting no_wname_in_kcontrol_name to true in avs topology
widgets which disables unwanted behaviour.
Fixes: be2b81b519 ("ASoC: Intel: avs: Parse control tuples")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240418142621.2487478-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fix use-after-free due to order vm is put and destroyed
-----BEGIN PGP SIGNATURE-----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=x39h
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2024-04-18' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Fix bo leak on error path during fb init
- Fix use-after-free due to order vm is put and destroyed
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/xjguifyantaibyrnymuiotxws6akiexi6r7tqyieqxgquovubc@kkrtbe24hjjr
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-17 (ice)
This series contains updates to ice driver only.
Marcin adds Tx malicious driver detection (MDD) events to be included as
part of mdd-auto-reset-vf.
Dariusz removes unnecessary implementation of ndo_get_phys_port_name.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Remove ndo_get_phys_port_name
ice: Add automatic VF reset on Tx MDD events
====================
Link: https://lore.kernel.org/r/20240417165634.2081793-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://lore.kernel.org/r/20240417144413.104257-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://lore.kernel.org/r/20240417144407.104241-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://lore.kernel.org/r/20240417144359.104225-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change the check for unsupported control flags, to use the new helper
flow_rule_is_supp_control_flags().
Since the helper was based on sfc, then nothing really changes.
Compile-tested, and compiled objects are identical.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20240417140712.100905-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver currently doesn't support any control flags.
Use flow_rule_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240417135131.99921-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test cases need to exit with non-zero status if they failed,
we currently don't do that:
# KTAP version 1
# 1..3
# # At /root/ksft-net-drv/drivers/net/./ping.py line 18:
# # Check failed 1 != 2
# not ok 1 ping.test_v4
# ok 2 ping.test_v6
# ok 3 ping.test_tcp
# # Totals: pass:2 fail:1 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net: ping.py
^^^^
It's a bit tempting to make the exit part of ksft_run(),
but that only works well for very trivial setups. We can
revisit this later, if people forget to call ksft_exit().
Link: https://lore.kernel.org/r/20240417231146.2435572-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Totals currently only pay attention to exceptions, if check fails
(say ksft_eq()) the test case will be counted as pass:
# At /ksft/drivers/net/./ping.py line 18:
# Check failed 1 != 2
not ok 1 ping.test_v4
ok 2 ping.test_v6
ok 3 ping.test_tcp
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
^^^^^^^^^^^^^
Pay attention to the result.
Fixes: b86761ff63 ("selftests: net: add scaffolding for Netlink tests in Python")
Link: https://lore.kernel.org/r/20240417231146.2435572-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xe_pm_init may encounter failures for various reasons, such as a failure
in initializing drmm_mutex, or when dealing with a d3cold-capable device
for vram_threshold sysfs creation and setting default threshold.
Presently, all these potential failures are disregarded.
Move d3cold.lock initialization to xe_pm_init_early and cause driver
abort if mutex initialization has failed.
For xe_pm_init failures cleanup the driver and return error code
-v2
Make mutex init cleaner (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-8-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Ensure that the status of all tile associated sysfs entries creation is
relayed to xe_tile_init_noalloc, leading to a driver load abort if any
sysfs creation failures occur.
-v2
Avoid unnecessary warn/error messages. (Lucas)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-7-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Instead of allowing the driver to load with incomplete sysfs entries in
case of sysfs creation failure, we should terminate the driver loading.
This change ensures that the status of all gt associated sysfs entries
creation is relayed to xe_gt_init, leading to a driver load abort if any
sysfs creation failures occur.
-v2
use err_force_wake label instead of new. (Lucas)
Avoid unnecessary warn/error messages. (Lucas)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-6-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In case of drmm_add_action_or_reset failure return NULL and no need
to print warning messages as they will be printed implictly.
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-5-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The drmm_add_action_or_reset function automatically invokes the
action (free_gsc_pkt) in the event of a failure; therefore, there's no
necessity to call it within the return check.
-v2
Fix commit message. (Lucas)
Fixes: d8b1571312 ("drm/xe/huc: HuC authentication via GSC")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-4-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The drmm_add_action_or_reset function automatically invokes the action
(sysfs removal) in the event of a failure; therefore, there's no
necessity to call it within the return check.
Modify the return type of xe_gt_ccs_mode_sysfs_init to int, allowing the
caller to pass errors up the call chain. Should sysfs creation or
drmm_add_action_or_reset fail, error propagation will prompt a driver
load abort.
-v2
Edit commit message (Nikula/Lucas)
use err_force_wake label instead of new. (Lucas)
Avoid unnecessary warn/error messages. (Lucas)
Fixes: f3bc5bb4d5 ("drm/xe: Allow userspace to configure CCS mode")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-3-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Instead of assigning the value of drmm_add_action_or_reset() to err and
returning err in case of failure and 0 in case of success, simply return
the result of drmm_add_action_or_reset().
-v2:
cleanup in xe_display too.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
