mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
1,280,080 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
9d22c96316 |
x86/topology: Handle bogus ACPI tables correctly
The ACPI specification clearly states how the processors should be
enumerated in the MADT:
"To ensure that the boot processor is supported post initialization,
two guidelines should be followed. The first is that OSPM should
initialize processors in the order that they appear in the MADT. The
second is that platform firmware should list the boot processor as the
first processor entry in the MADT.
...
Failure of OSPM implementations and platform firmware to abide by
these guidelines can result in both unpredictable and non optimal
platform operation."
The kernel relies on that ordering to detect the real BSP on crash kernels
which is important to avoid sending a INIT IPI to it as that would cause a
full machine reset.
On a Dell XPS 16 9640 the BIOS ignores this rule and enumerates the CPUs in
the wrong order. As a consequence the kernel falsely detects a crash kernel
and disables the corresponding CPU.
Prevent this by checking the IA32_APICBASE MSR for the BSP bit on the boot
CPU. If that bit is set, then the MADT based BSP detection can be safely
ignored. If the kernel detects a mismatch between the BSP bit and the first
enumerated MADT entry then emit a firmware bug message.
This obviously also has to be taken into account when the boot APIC ID and
the first enumerated APIC ID match. If the boot CPU does not have the BSP
bit set in the APICBASE MSR then there is no way for the boot CPU to
determine which of the CPUs is the real BSP. Sending an INIT to the real
BSP would reset the machine so the only sane way to deal with that is to
limit the number of CPUs to one and emit a corresponding warning message.
Fixes:
|
||
|
|
39bc27bd68 |
drm/shmem-helper: Fix BUG_ON() on mmap(PROT_WRITE, MAP_PRIVATE)
Lack of check for copy-on-write (COW) mapping in drm_gem_shmem_mmap
allows users to call mmap with PROT_WRITE and MAP_PRIVATE flag
causing a kernel panic due to BUG_ON in vmf_insert_pfn_prot:
BUG_ON((vma->vm_flags & VM_PFNMAP) && is_cow_mapping(vma->vm_flags));
Return -EINVAL early if COW mapping is detected.
This bug affects all drm drivers using default shmem helpers.
It can be reproduced by this simple example:
void *ptr = mmap(0, size, PROT_WRITE, MAP_PRIVATE, fd, mmap_offset);
ptr[0] = 0;
Fixes:
|
||
|
|
3c0a2e0b0a |
nfs: fix undefined behavior in nfs_block_bits()
Shifting *signed int* typed constant 1 left by 31 bits causes undefined behavior. Specify the correct *unsigned long* type by using 1UL instead. Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. Cc: stable@vger.kernel.org Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> |
||
|
|
a01b077a87 |
pNFS: rework pnfs_generic_pg_check_layout to check IO range
All callers of pnfs_generic_pg_check_layout() also want to do a call to check that the layout's range covers the IO range. Merge the functionality of the pnfs_generic_pg_check_range() into that of pnfs_generic_pg_check_layout(). Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> |
||
|
|
523412b904 |
pNFS/filelayout: check layout segment range
Before doing the IO, check that we have the layout covering the range of IO. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> |
||
|
|
3ebcb24646 |
pNFS/filelayout: fixup pNfs allocation modes
Change left over allocation flags.
Fixes:
|
||
|
|
25460d6f39 |
net/9p: fix uninit-value in p9_client_rpc()
Syzbot with the help of KMSAN reported the following error:
BUG: KMSAN: uninit-value in trace_9p_client_res include/trace/events/9p.h:146 [inline]
BUG: KMSAN: uninit-value in p9_client_rpc+0x1314/0x1340 net/9p/client.c:754
trace_9p_client_res include/trace/events/9p.h:146 [inline]
p9_client_rpc+0x1314/0x1340 net/9p/client.c:754
p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031
v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410
v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122
legacy_get_tree+0x114/0x290 fs/fs_context.c:662
vfs_get_tree+0xa7/0x570 fs/super.c:1797
do_new_mount+0x71f/0x15e0 fs/namespace.c:3352
path_mount+0x742/0x1f20 fs/namespace.c:3679
do_mount fs/namespace.c:3692 [inline]
__do_sys_mount fs/namespace.c:3898 [inline]
__se_sys_mount+0x725/0x810 fs/namespace.c:3875
__x64_sys_mount+0xe4/0x150 fs/namespace.c:3875
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
__alloc_pages+0x9d6/0xe70 mm/page_alloc.c:4598
__alloc_pages_node include/linux/gfp.h:238 [inline]
alloc_pages_node include/linux/gfp.h:261 [inline]
alloc_slab_page mm/slub.c:2175 [inline]
allocate_slab mm/slub.c:2338 [inline]
new_slab+0x2de/0x1400 mm/slub.c:2391
___slab_alloc+0x1184/0x33d0 mm/slub.c:3525
__slab_alloc mm/slub.c:3610 [inline]
__slab_alloc_node mm/slub.c:3663 [inline]
slab_alloc_node mm/slub.c:3835 [inline]
kmem_cache_alloc+0x6d3/0xbe0 mm/slub.c:3852
p9_tag_alloc net/9p/client.c:278 [inline]
p9_client_prepare_req+0x20a/0x1770 net/9p/client.c:641
p9_client_rpc+0x27e/0x1340 net/9p/client.c:688
p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031
v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410
v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122
legacy_get_tree+0x114/0x290 fs/fs_context.c:662
vfs_get_tree+0xa7/0x570 fs/super.c:1797
do_new_mount+0x71f/0x15e0 fs/namespace.c:3352
path_mount+0x742/0x1f20 fs/namespace.c:3679
do_mount fs/namespace.c:3692 [inline]
__do_sys_mount fs/namespace.c:3898 [inline]
__se_sys_mount+0x725/0x810 fs/namespace.c:3875
__x64_sys_mount+0xe4/0x150 fs/namespace.c:3875
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
If p9_check_errors() fails early in p9_client_rpc(), req->rc.tag
will not be properly initialized. However, trace_9p_client_res()
ends up trying to print it out anyway before p9_client_rpc()
finishes.
Fix this issue by assigning default values to p9_fcall fields
such as 'tag' and (just in case KMSAN unearths something new) 'id'
during the tag allocation stage.
Reported-and-tested-by: syzbot+ff14db38f56329ef68df@syzkaller.appspotmail.com
Fixes:
|
||
|
|
580acf6cd8 |
Merge branch 'af_unix-fix-gc-and-improve-selftest'
Michal Luczaj says: ==================== af_unix: Fix GC and improve selftest Series deals with AF_UNIX garbage collector mishandling some in-flight graph cycles. Embryos carrying OOB packets with SCM_RIGHTS cause issues. Patch 1/2 fixes the memory leak. Patch 2/2 tweaks the selftest for a better OOB coverage. v3: - Patch 1/2: correct the commit message (Kuniyuki) v2: https://lore.kernel.org/netdev/20240516145457.1206847-1-mhal@rbox.co/ - Patch 1/2: remove WARN_ON_ONCE() (Kuniyuki) - Combine both patches into a series (Kuniyuki) v1: https://lore.kernel.org/netdev/20240516103049.1132040-1-mhal@rbox.co/ ==================== Link: https://lore.kernel.org/r/20240517093138.1436323-1-mhal@rbox.co Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
|
e060e433e5 |
selftest: af_unix: Make SCM_RIGHTS into OOB data.
scm_rights.c covers various test cases for inflight file descriptors and garbage collector for AF_UNIX sockets. Currently, SCM_RIGHTS messages are sent with 3-bytes string, and it's not good for MSG_OOB cases, as SCM_RIGTS cmsg goes with the first 2-bytes, which is non-OOB data. Let's send SCM_RIGHTS messages with 1-byte character to pack SCM_RIGHTS into OOB data. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
|
041933a1ec |
af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS
GC attempts to explicitly drop oob_skb's reference before purging the hit
list.
The problem is with embryos: kfree_skb(u->oob_skb) is never called on an
embryo socket.
The python script below [0] sends a listener's fd to its embryo as OOB
data. While GC does collect the embryo's queue, it fails to drop the OOB
skb's refcount. The skb which was in embryo's receive queue stays as
unix_sk(sk)->oob_skb and keeps the listener's refcount [1].
Tell GC to dispose embryo's oob_skb.
[0]:
from array import array
from socket import *
addr = '\x00unix-oob'
lis = socket(AF_UNIX, SOCK_STREAM)
lis.bind(addr)
lis.listen(1)
s = socket(AF_UNIX, SOCK_STREAM)
s.connect(addr)
scm = (SOL_SOCKET, SCM_RIGHTS, array('i', [lis.fileno()]))
s.sendmsg([b'x'], [scm], MSG_OOB)
lis.close()
[1]
$ grep unix-oob /proc/net/unix
$ ./unix-oob.py
$ grep unix-oob /proc/net/unix
0000000000000000: 00000002 00000000 00000000 0001 02 0 @unix-oob
0000000000000000: 00000002 00000000 00010000 0001 01 6072 @unix-oob
Fixes:
|
||
|
|
737ce4fb96 |
ASoC: dt-bindings: stm32: Ensure compatible pattern matches whole string
The compatible pattern "st,stm32-sai-sub-[ab]" is missing starting and ending anchors, so any prefix and/or suffix would still be valid. This also fixes a warning on the example: Documentation/devicetree/bindings/sound/st,stm32-sai.example.dtb: /example-0/sai@4400b000/audio-controller@4400b004: failed to match any schema with compatible: ['st,stm32-sai-sub-a'] Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://msgid.link/r/20240520222705.1742367-1-robh@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
3ebc46ca86 |
tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
In dctcp_update_alpha(), we use a module parameter dctcp_shift_g
as follows:
alpha -= min_not_zero(alpha, alpha >> dctcp_shift_g);
...
delivered_ce <<= (10 - dctcp_shift_g);
It seems syzkaller started fuzzing module parameters and triggered
shift-out-of-bounds [0] by setting 100 to dctcp_shift_g:
memcpy((void*)0x20000080,
"/sys/module/tcp_dctcp/parameters/dctcp_shift_g\000", 47);
res = syscall(__NR_openat, /*fd=*/0xffffffffffffff9cul, /*file=*/0x20000080ul,
/*flags=*/2ul, /*mode=*/0ul);
memcpy((void*)0x20000000, "100\000", 4);
syscall(__NR_write, /*fd=*/r[0], /*val=*/0x20000000ul, /*len=*/4ul);
Let's limit the max value of dctcp_shift_g by param_set_uint_minmax().
With this patch:
# echo 10 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g
# cat /sys/module/tcp_dctcp/parameters/dctcp_shift_g
10
# echo 11 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g
-bash: echo: write error: Invalid argument
[0]:
UBSAN: shift-out-of-bounds in net/ipv4/tcp_dctcp.c:143:12
shift exponent 100 is too large for 32-bit type 'u32' (aka 'unsigned int')
CPU: 0 PID: 8083 Comm: syz-executor345 Not tainted 6.9.0-05151-g1b294a1f3561 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x201/0x300 lib/dump_stack.c:114
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_shift_out_of_bounds+0x346/0x3a0 lib/ubsan.c:468
dctcp_update_alpha+0x540/0x570 net/ipv4/tcp_dctcp.c:143
tcp_in_ack_event net/ipv4/tcp_input.c:3802 [inline]
tcp_ack+0x17b1/0x3bc0 net/ipv4/tcp_input.c:3948
tcp_rcv_state_process+0x57a/0x2290 net/ipv4/tcp_input.c:6711
tcp_v4_do_rcv+0x764/0xc40 net/ipv4/tcp_ipv4.c:1937
sk_backlog_rcv include/net/sock.h:1106 [inline]
__release_sock+0x20f/0x350 net/core/sock.c:2983
release_sock+0x61/0x1f0 net/core/sock.c:3549
mptcp_subflow_shutdown+0x3d0/0x620 net/mptcp/protocol.c:2907
mptcp_check_send_data_fin+0x225/0x410 net/mptcp/protocol.c:2976
__mptcp_close+0x238/0xad0 net/mptcp/protocol.c:3072
mptcp_close+0x2a/0x1a0 net/mptcp/protocol.c:3127
inet_release+0x190/0x1f0 net/ipv4/af_inet.c:437
__sock_release net/socket.c:659 [inline]
sock_close+0xc0/0x240 net/socket.c:1421
__fput+0x41b/0x890 fs/file_table.c:422
task_work_run+0x23b/0x300 kernel/task_work.c:180
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0x9c8/0x2540 kernel/exit.c:878
do_group_exit+0x201/0x2b0 kernel/exit.c:1027
__do_sys_exit_group kernel/exit.c:1038 [inline]
__se_sys_exit_group kernel/exit.c:1036 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1036
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xe4/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x67/0x6f
RIP: 0033:0x7f6c2b5005b6
Code: Unable to access opcode bytes at 0x7f6c2b50058c.
RSP: 002b:00007ffe883eb948 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00007f6c2b5862f0 RCX: 00007f6c2b5005b6
RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001
RBP: 0000000000000001 R08: 00000000000000e7 R09: ffffffffffffffc0
R10: 0000000000000006 R11: 0000000000000246 R12: 00007f6c2b5862f0
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001
</TASK>
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: Yue Sun <samsun1006219@gmail.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/netdev/CAEkJfYNJM=cw-8x7_Vmj1J6uYVCWMbbvD=EFmDPVBGpTsqOxEA@mail.gmail.com/
Fixes:
|
||
|
|
74b38cd77d |
regulator: tps6594-regulator: Correct multi-phase configuration
According to the TPS6594 PMIC Manual (linked) 8.3.2.1.4 Multi-Phase BUCK
Regulator Configurations section, the PMIC ignores all the other bucks'
except the primary buck's regulator registers. This is BUCK1 for
configurations BUCK12, BUCK123 and BUCK1234 while it is BUCK3 for
BUCK34. Correct the registers mapped for these configurations
accordingly.
Fixes:
|
||
|
|
ea63ac1429 |
selftests/net: use tc rule to filter the na packet
Test arp_ndisc_untracked_subnets use tcpdump to filter the unsolicited
and untracked na messages. It set -e before calling tcpdump. But if
tcpdump filters 0 packet, it will return none zero, and cause the script
to exit.
Instead of using slow tcpdump to capture packets, let's using tc rule
to filter out the na message.
At the same time, fix function setup_v6 which only needs one parameter.
Move all the related helpers from forwarding lib.sh to net lib.sh.
Fixes:
|
||
|
|
efb9f4f19f |
ipv6: sr: fix memleak in seg6_hmac_init_algo
seg6_hmac_init_algo returns without cleaning up the previous allocations
if one fails, so it's going to leak all that memory and the crypto tfms.
Update seg6_hmac_exit to only free the memory when allocated, so we can
reuse the code directly.
Fixes:
|
||
|
|
e8dc41afca |
pmdomain: imx: gpcv2: Add delay after power up handshake
AudioMix BLK-CTRL on i.MX8MP encountered an accessing register issue
after power up.
[ 2.181035] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 2.181038] CPU: 1 PID: 48 Comm: kworker/u16:2 Not tainted 6.9.0-rc5-next-20240424-00003-g21cec88845c6 #171
[ 2.181047] Hardware name: NXP i.MX8MPlus EVK board (DT)
[ 2.181050] Workqueue: events_unbound deferred_probe_work_func
[ 2.181064] Call trace:
[...]
[ 2.181142] arm64_serror_panic+0x6c/0x78
[ 2.181149] do_serror+0x3c/0x70
[ 2.181157] el1h_64_error_handler+0x30/0x48
[ 2.181164] el1h_64_error+0x64/0x68
[ 2.181171] clk_imx8mp_audiomix_runtime_resume+0x34/0x44
[ 2.181183] __genpd_runtime_resume+0x30/0x80
[ 2.181195] genpd_runtime_resume+0x110/0x244
[ 2.181205] __rpm_callback+0x48/0x1d8
[ 2.181213] rpm_callback+0x68/0x74
[ 2.181224] rpm_resume+0x468/0x6c0
[ 2.181234] __pm_runtime_resume+0x50/0x94
[ 2.181243] pm_runtime_get_suppliers+0x60/0x8c
[ 2.181258] __driver_probe_device+0x48/0x12c
[ 2.181268] driver_probe_device+0xd8/0x15c
[ 2.181278] __device_attach_driver+0xb8/0x134
[ 2.181290] bus_for_each_drv+0x84/0xe0
[ 2.181302] __device_attach+0x9c/0x188
[ 2.181312] device_initial_probe+0x14/0x20
[ 2.181323] bus_probe_device+0xac/0xb0
[ 2.181334] deferred_probe_work_func+0x88/0xc0
[ 2.181344] process_one_work+0x150/0x290
[ 2.181357] worker_thread+0x2f8/0x408
[ 2.181370] kthread+0x110/0x114
[ 2.181381] ret_from_fork+0x10/0x20
[ 2.181391] SMP: stopping secondary CPUs
According to comments in power up handshake:
/* request the ADB400 to power up */
if (domain->bits.hskreq) {
regmap_update_bits(domain->regmap, domain->regs->hsk,
domain->bits.hskreq, domain->bits.hskreq);
/*
* ret = regmap_read_poll_timeout(domain->regmap, domain->regs->hsk, reg_val,
* (reg_val & domain->bits.hskack), 0,
* USEC_PER_MSEC);
* Technically we need the commented code to wait handshake. But that needs
* the BLK-CTL module BUS clk-en bit being set.
*
* There is a separate BLK-CTL module and we will have such a driver for it,
* that driver will set the BUS clk-en bit and handshake will be triggered
* automatically there. Just add a delay and suppose the handshake finish
* after that.
*/
}
The BLK-CTL module needs to add delay to wait for a handshake request finished.
For some BLK-CTL module (eg. AudioMix on i.MX8MP) doesn't have BUS clk-en
bit, it is better to add delay in this driver, as the BLK-CTL module doesn't
need to care about how it is powered up.
regmap_read_bypassed() is to make sure the above write IO transaction already
reaches target before udelay().
Fixes:
|
||
|
|
9841991a44 |
af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock.
Billy Jheng Bing-Jhong reported a race between __unix_gc() and
queue_oob().
__unix_gc() tries to garbage-collect close()d inflight sockets,
and then if the socket has MSG_OOB in unix_sk(sk)->oob_skb, GC
will drop the reference and set NULL to it locklessly.
However, the peer socket still can send MSG_OOB message and
queue_oob() can update unix_sk(sk)->oob_skb concurrently, leading
NULL pointer dereference. [0]
To fix the issue, let's update unix_sk(sk)->oob_skb under the
sk_receive_queue's lock and take it everywhere we touch oob_skb.
Note that we defer kfree_skb() in manage_oob() to silence lockdep
false-positive (See [1]).
[0]:
BUG: kernel NULL pointer dereference, address: 0000000000000008
PF: supervisor write access in kernel mode
PF: error_code(0x0002) - not-present page
PGD 8000000009f5e067 P4D 8000000009f5e067 PUD 9f5d067 PMD 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 3 PID: 50 Comm: kworker/3:1 Not tainted 6.9.0-rc5-00191-gd091e579b864 #110
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: events delayed_fput
RIP: 0010:skb_dequeue (./include/linux/skbuff.h:2386 ./include/linux/skbuff.h:2402 net/core/skbuff.c:3847)
Code: 39 e3 74 3e 8b 43 10 48 89 ef 83 e8 01 89 43 10 49 8b 44 24 08 49 c7 44 24 08 00 00 00 00 49 8b 14 24 49 c7 04 24 00 00 00 00 <48> 89 42 08 48 89 10 e8 e7 c5 42 00 4c 89 e0 5b 5d 41 5c c3 cc cc
RSP: 0018:ffffc900001bfd48 EFLAGS: 00000002
RAX: 0000000000000000 RBX: ffff8880088f5ae8 RCX: 00000000361289f9
RDX: 0000000000000000 RSI: 0000000000000206 RDI: ffff8880088f5b00
RBP: ffff8880088f5b00 R08: 0000000000080000 R09: 0000000000000001
R10: 0000000000000003 R11: 0000000000000001 R12: ffff8880056b6a00
R13: ffff8880088f5280 R14: 0000000000000001 R15: ffff8880088f5a80
FS: 0000000000000000(0000) GS:ffff88807dd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000006314000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
unix_release_sock (net/unix/af_unix.c:654)
unix_release (net/unix/af_unix.c:1050)
__sock_release (net/socket.c:660)
sock_close (net/socket.c:1423)
__fput (fs/file_table.c:423)
delayed_fput (fs/file_table.c:444 (discriminator 3))
process_one_work (kernel/workqueue.c:3259)
worker_thread (kernel/workqueue.c:3329 kernel/workqueue.c:3416)
kthread (kernel/kthread.c:388)
ret_from_fork (arch/x86/kernel/process.c:153)
ret_from_fork_asm (arch/x86/entry/entry_64.S:257)
</TASK>
Modules linked in:
CR2: 0000000000000008
Link: https://lore.kernel.org/netdev/a00d3993-c461-43f2-be6d-07259c98509a@rbox.co/ [1]
Fixes:
|
||
|
|
eabb8a9be1 |
Revert "r8169: don't try to disable interrupts if NAPI is, scheduled already"
This reverts commit |
||
|
|
dee8f20e61 |
Merge branch 'pm-cpufreq'
Merge an amd-pstate driver fix for 6.10-rc1: - Fix a memory leak in the exit path of amd-pstate (Peng Ma). * pm-cpufreq: cpufreq: amd-pstate: fix memory leak on CPU EPP exit |
||
|
|
e7647cbaba |
Input: xpad - add support for Machenike G5 Pro Controller
Add VID and PID to the xpad_device and VID to the xpad_table to allow driver to use Machenike G5 Pro Controller, which is XTYPE_XBOX360 compatible in Xinput mode. Signed-off-by: Kirill Artemev <artewar6767@gmail.com> Link: https://lore.kernel.org/r/20240516032926.12501-2-artewar6767@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> |
||
|
|
050bf3c793 |
KEYS: trusted: Do not use WARN when encode fails
When asn1_encode_sequence() fails, WARN is not the correct solution.
1. asn1_encode_sequence() is not an internal function (located
in lib/asn1_encode.c).
2. Location is known, which makes the stack trace useless.
3. Results a crash if panic_on_warn is set.
It is also noteworthy that the use of WARN is undocumented, and it
should be avoided unless there is a carefully considered rationale to
use it.
Replace WARN with pr_err, and print the return value instead, which is
only useful piece of information.
Cc: stable@vger.kernel.org # v5.13+
Fixes:
|
||
|
|
ffcaa2172c |
KEYS: trusted: Fix memory leak in tpm2_key_encode()
'scratch' is never freed. Fix this by calling kfree() in the success, and
in the error case.
Cc: stable@vger.kernel.org # +v5.13
Fixes:
|
||
|
|
8f6a15f095 |
Coccinelle commits for 6.10
One patch slightly improves the text in a comment. The other patch (on minmax.cocci) removes a report about ? being used in return statements that has been generating not very useful suggestions to change idiomatic code. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEnGZC8gbRfLXdcpA0F+92B3f5RZ0FAmZLtOcACgkQF+92B3f5 RZ3fjBAAhWqPJSWKpORkjMMEil0aO+LknyW9aOPUgEwLLIw3Qhji2/12MRhp0CnG fMBPccXjsdsqRBmmjOTMmN4q0aZk/7s7+MmcZMTwQWS6zYtbiJj/OMdKbghWeiOx kap/HN5u6KEEdYljaOdLanXG8a38+9Wd7RQuxbUCUSHh1RDazcgqkZrZa4VpE6dT oGT6b+35056bZe9s1TvMLOFAAnipF/lm6WJIzIrxKm5HsE8C+UWDorlEQ0LXnsQn vuvGIgiQFVLSskt3hWk/0hbRFByHQ335Cc6umohoOYK9ppVqtQp499AwunQlQq/L fiI3duuAdUPl6VWKBI6C2CaWo1cS2e/JdWnYHiZop5CRYP1S6MY0d3AWOxyE3/KK EiJFi3fce1K6Z95lr9TK29tbc0Bp/ghs8S2ge58eYzcPVd8bEuk0+k7b10gZew8i TniDIduDYvSOhhhFwPfrrapBGmajw572/t+h2W9EBCZhBHmNLk1l+mHBrTP3JhdA 3IFPfjO6FO8ayTM7IEeiQr4EOXqGp/6A4ty/cHlmggdIg+OhyJ5RgUvAktnQeBM2 TApYj+bR45dXxkh0WTLxCSTvsbpvRoF9uhEkFMP9mF+wS3Uq8PRCbsHvW5ujQqrs EocU/3tuED3GMFNVASG77Zkler4UUXUNr3FCKHsDnSYc1Hz6iVg= =EDrr -----END PGP SIGNATURE----- Merge tag 'cocci-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux Pull coccinelle updates from Julia Lawall: "One patch slightly improves the text in a comment. The other patch (on minmax.cocci) removes a report about ? being used in return statements that has been generating not very useful suggestions to change idiomatic code" * tag 'cocci-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: Coccinelle: pm_runtime: Fix grammar in comment coccinelle: misc: minmax: Suppress reports for err returns |
||
|
|
3eb3c33c1d |
asm-generic cleanups for 6.10
These are a few cross-architecture cleanup patches:
- Thomas Zimmermann works on separating fbdev support from the asm/video.h
contents that may be used by either the old fbdev drivers or the
newer drm display code.
- Thorsten Blum contributes cleanups for the generic bitops code
and asm-generic/bug.h
- I remove the orphaned include/asm-generic/page.h header that used to
included by long-removed mmu-less architectures.
-----BEGIN PGP SIGNATURE-----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=riCs
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"These are a few cross-architecture cleanup patches:
- separate out fbdev support from the asm/video.h contents that may
be used by either the old fbdev drivers or the newer drm display
code (Thomas Zimmermann)
- cleanups for the generic bitops code and asm-generic/bug.h
(Thorsten Blum)
- remove the orphaned include/asm-generic/page.h header that used to
be included by long-removed mmu-less architectures (me)"
* tag 'asm-generic-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: Fix name collision with ACPI's video.o
bug: Improve comment
asm-generic: remove unused asm-generic/page.h
arch: Rename fbdev header and source files
arch: Remove struct fb_info from video helpers
arch: Select fbdev helpers with CONFIG_VIDEO
bitops: Change function return types from long to int
|
||
|
|
1b03616209 |
soc: devicetree updates for v6.10, part 2
This is a follow-up to an earlier pull request for device tree changes,
as three platform maintainers sent their contents too late to be included
in the main set, but had not caused any further problems since then:
- The Amlogic platform now containts support for two new SoC types,
the A4 and A5 chips for audio applications. Both come with a
reference board, and one more dts file gets addded for the
combination of the MNT Reform Laptop with the BPI-CM4 CPU
module
- The ASpeed platform adds support for six addititional server
platforms that use ast2500 or ast2600 as their BMC, while
another one gets removed.
- The RISC-V platforms from Microchip, Starfive and and T-HEAD
get additional features for existing hardware, plus the
addition of the Milk-V Mars based on the StarFive VisionFive v2
board.
-----BEGIN PGP SIGNATURE-----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=iChs
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC devicetree updates from Arnd Bergmann:
"This is a follow-up to an earlier pull request for device tree
changes, as three platform maintainers sent their contents too late to
be included in the main set, but had not caused any further problems
since then:
- The Amlogic platform now containts support for two new SoC types,
the A4 and A5 chips for audio applications. Both come with a
reference board, and one more dts file gets addded for the
combination of the MNT Reform Laptop with the BPI-CM4 CPU module
- The ASpeed platform adds support for six addititional server
platforms that use ast2500 or ast2600 as their BMC, while another
one gets removed
- The RISC-V platforms from Microchip, Starfive and and T-HEAD get
additional features for existing hardware, plus the addition of the
Milk-V Mars based on the StarFive VisionFive v2 board"
* tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (76 commits)
riscv: dts: microchip: add pac1934 power-monitor to icicle
riscv: dts: thead: Fix node ordering in TH1520 device tree
ARM: dts: aspeed: Add ASRock E3C256D4I BMC
dt-bindings: arm: aspeed: document ASRock E3C256D4I
dt-bindings: trivial-devices: add isil,isl69269
ARM: dts: aspeed: x4tf: Add dts for asus x4tf project
dt-bindings: arm: aspeed: add ASUS X4TF board
ARM: dts: aspeed: Remove Facebook Cloudripper dts
ARM: dts: aspeed: drop unused ref_voltage ADC property
ARM: dts: aspeed: harma: correct Mellanox multi-host property
ARM: dts: aspeed: yosemitev2: correct Mellanox multi-host property
ARM: dts: aspeed: yosemite4: correct Mellanox multi-host property
ARM: dts: aspeed: greatlakes: correct Mellanox multi-host property
ARM: dts: aspeed: Modify I2C bus configuration
ARM: dts: aspeed: Disable unused ADC channels for Asrock X570D4U BMC
ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMC
ARM: dts: aspeed: yosemite4: set bus13 frequency to 100k
ARM: dts: Aspeed: Bonnell: Fix NVMe LED labels
ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug card
ARM: dts: aspeed: ahe50dc: Update lm25066 regulator name
...
|
||
|
|
30aec6e1bb |
VFIO updates for v6.10-rc1
- The vfio fsl-mc bus driver has become orphaned. We'll consider
removing it in future releases if a new maintainer isn't found.
(Alex Williamson)
- Improved usage of opaque data in vfio-pci INTx handling,
avoiding lookups of the eventfd through the interrupt and
irqfd runtime paths. (Alex Williamson)
- Resolve an error path memory leak introduced in vfio-pci
interrupt code. (Ye Bin)
- Addition of interrupt support for vfio devices exposed on the
CDX bus, including a new MSI allocation helper and export of
existing helpers for MSI alloc and free. (Nipun Gupta)
- A new vfio-pci variant driver supporting migration of Intel
QAT VF devices for the GEN4 PFs. (Xin Zeng & Yahui Cao)
- Resolve a possibly circular locking dependency in vfio-pci
by avoiding copy_to_user() from a PCI bus walk callback.
(Alex Williamson)
- Trivial docs update to remove a duplicate semicolon.
(Foryun Ma)
-----BEGIN PGP SIGNATURE-----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=EFpj
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.10-rc1' of https://github.com/awilliam/linux-vfio
Pull vfio updates from Alex Williamson:
- The vfio fsl-mc bus driver has become orphaned. We'll consider
removing it in future releases if a new maintainer isn't found (Alex
Williamson)
- Improved usage of opaque data in vfio-pci INTx handling, avoiding
lookups of the eventfd through the interrupt and irqfd runtime paths
(Alex Williamson)
- Resolve an error path memory leak introduced in vfio-pci interrupt
code (Ye Bin)
- Addition of interrupt support for vfio devices exposed on the CDX
bus, including a new MSI allocation helper and export of existing
helpers for MSI alloc and free (Nipun Gupta)
- A new vfio-pci variant driver supporting migration of Intel QAT VF
devices for the GEN4 PFs (Xin Zeng & Yahui Cao)
- Resolve a possibly circular locking dependency in vfio-pci by
avoiding copy_to_user() from a PCI bus walk callback (Alex
Williamson)
- Trivial docs update to remove a duplicate semicolon (Foryun Ma)
* tag 'vfio-v6.10-rc1' of https://github.com/awilliam/linux-vfio:
vfio/pci: Restore zero affected bus reset devices warning
vfio: remove an extra semicolon
vfio/pci: Collect hot-reset devices to local buffer
vfio/qat: Add vfio_pci driver for Intel QAT SR-IOV VF devices
vfio/cdx: add interrupt support
genirq/msi: Add MSI allocation helper and export MSI functions
vfio/pci: fix potential memory leak in vfio_intx_enable()
vfio/pci: Pass eventfd context object through irqfd
vfio/pci: Pass eventfd context to IRQ handler
MAINTAINERS: Orphan vfio fsl-mc bus driver
|
||
|
|
70ec81c2e2 |
linux_kselftest-next-6.10-rc1-fixes
This kselftest fixes update for Linux 6.10-rc1 consists of reverts framework change to add D_GNU_SOURCE to KHDR_INCLUDES to Makefile, lib.mk, and kselftest_harness.h and follow-on changes to cgroup and sgx test as they are causing build failures and warnings. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmZLb3sACgkQCwJExA0N QxweSQ//WiDfJtObms7pDos6Q5DBnq2seGgK3+JUcAbBhNETPLzYBHSnvVnixRmi +QccdtTlPYE98vAk7GCt9zuBr82SV1z9VaNHVst+4jZeaSkmNFHGMS/ZSEE1x79g z4qL1C1eA0qPzmW17vgUv08+Lm5WKxt4RIsZEYWBi7tnu+MbfcaPaTbGZ85o/tG0 IVZluGfVVaci7CQnpYhRD4hsJOWUC2H/YrvCNpjm6rGUFu+4Jm7rvHJPO+Ef6yCT tjKc5wReHRR2xT2+i4FoFjGqrAMsM/xakdiVpQWUlHUSm5/Nboqw7B73eNm/N2YL KvoJKBCuUPjmPKsoDGyUSORyx7j5RJnmdbGbFISOnZGpDVDkwSJVQDPJKeW9WqfS ONYVRRyjdift7BVcbFIpnde6TD7lCCv8sYrr2SpZv1wHybhMmrL0ojoTOOO93Xcd agpHGHjIOqmn+EGmptYeFEKKHr/GX+r6cQK0csmNhuSajHxeohwpzzs/v9gUisQ0 BB5dC2Mo7wj1CES8DYKucFSSyCmZruzpyKtEz7Ndj1SAYzZqqYQV41kMDdlGYDE4 qsHNVpA5DOFLOV8wOX59XjSu+UnJDjFyluWSaj66lJ1gA9qpYEifWD0l851LZ1YG hcCTd90Hbuh9XlOPmQEciVF98tJFrO0ho6vQu41jgjLPvJ4Y8H8= =Qisj -----END PGP SIGNATURE----- Merge tag 'linux_kselftest-next-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Revert framework change to add D_GNU_SOURCE to KHDR_INCLUDES to Makefile, lib.mk, and kselftest_harness.h and follow-on changes to cgroup and sgx test as they are causing build failures and warnings" * tag 'linux_kselftest-next-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: Revert "selftests/cgroup: Drop define _GNU_SOURCE" Revert "selftests/sgx: Include KHDR_INCLUDES in Makefile" Revert "selftests: Compile kselftest headers with -D_GNU_SOURCE" |
||
|
|
eb853413d0 |
drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs
Small APUs(i.e., consumer, embedded products) usually have a small carveout device memory which can't satisfy most compute workloads memory allocation requirements. We can't even run a Basic MNIST Example with a default 512MB carveout. https://github.com/pytorch/examples/tree/main/mnist. Error Log: "torch.cuda.OutOfMemoryError: HIP out of memory. Tried to allocate 84.00 MiB. GPU 0 has a total capacity of 512.00 MiB of which 0 bytes is free. Of the allocated memory 103.83 MiB is allocated by PyTorch, and 22.17 MiB is reserved by PyTorch but unallocated" Though we can change BIOS settings to enlarge carveout size, which is inflexible and may bring complaint. On the other hand, the memory resource can't be effectively used between host and device. The solution is MI300A approach, i.e., let VRAM allocations go to GTT. Then device and host can flexibly and effectively share memory resource. v2: Report local_mem_size_private as 0. (Felix) Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
|
2a705f3e49 |
drm/amdkfd: handle duplicate BOs in reserve_bo_and_cond_vms
Observed on gfx8 ASIC where KFD_IOC_ALLOC_MEM_FLAGS_AQL_QUEUE_MEM is used. Two attachments use the same VM, root PD would be locked twice. [ 57.910418] Call Trace: [ 57.793726] ? reserve_bo_and_cond_vms+0x111/0x1c0 [amdgpu] [ 57.793820] amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu+0x6c/0x1c0 [amdgpu] [ 57.793923] ? idr_get_next_ul+0xbe/0x100 [ 57.793933] kfd_process_device_free_bos+0x7e/0xf0 [amdgpu] [ 57.794041] kfd_process_wq_release+0x2ae/0x3c0 [amdgpu] [ 57.794141] ? process_scheduled_works+0x29c/0x580 [ 57.794147] process_scheduled_works+0x303/0x580 [ 57.794157] ? __pfx_worker_thread+0x10/0x10 [ 57.794160] worker_thread+0x1a2/0x370 [ 57.794165] ? __pfx_worker_thread+0x10/0x10 [ 57.794167] kthread+0x11b/0x150 [ 57.794172] ? __pfx_kthread+0x10/0x10 [ 57.794177] ret_from_fork+0x3d/0x60 [ 57.794181] ? __pfx_kthread+0x10/0x10 [ 57.794184] ret_from_fork_asm+0x1b/0x30 Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
|
34cda5ab89 |
arch: Fix name collision with ACPI's video.o
Commit |
||
|
|
72ece20127 |
f2fs update for 6.10-rc1
In this round, we've tried to address some performance issues on zoned storage
such as direct IO and write_hints. In addition, we've migrated some IO paths
using folio. Meanwhile, there are multiple bug fixes in the compression paths,
sanity check conditions, and error handlers.
Enhancement:
- allow direct io of pinned files for zoned storage
- assign the write hint per stream by default
- convert read paths and test_writeback to folio
- avoid allocating WARM_DATA segment for direct IO
Bug fix:
- fix false alarm on invalid block address
- fix to add missing iput() in gc_data_segment()
- fix to release node block count in error path of f2fs_new_node_page()
- compress: don't allow unaligned truncation on released compress inode
- compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
- compress: fix error path of inc_valid_block_count()
- compress: fix to update i_compr_blocks correctly
- fix block migration when section is not aligned to pow2
- don't trigger OPU on pinfile for direct IO
- fix to do sanity check on i_xattr_nid in sanity_check_inode()
- write missing last sum blk of file pinning section
- clear writeback when compression failed
- fix to adjust appropirate defragment pg_end
As usual, there are several minor code clean-ups, and fixes to manage missing
corner cases in the error paths.
-----BEGIN PGP SIGNATURE-----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=3mwj
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.10.rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've tried to address some performance issues on zoned
storage such as direct IO and write_hints. In addition, we've migrated
some IO paths using folio. Meanwhile, there are multiple bug fixes in
the compression paths, sanity check conditions, and error handlers.
Enhancements:
- allow direct io of pinned files for zoned storage
- assign the write hint per stream by default
- convert read paths and test_writeback to folio
- avoid allocating WARM_DATA segment for direct IO
Bug fixes:
- fix false alarm on invalid block address
- fix to add missing iput() in gc_data_segment()
- fix to release node block count in error path of
f2fs_new_node_page()
- compress:
- don't allow unaligned truncation on released compress inode
- cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
- fix error path of inc_valid_block_count()
- fix to update i_compr_blocks correctly
- fix block migration when section is not aligned to pow2
- don't trigger OPU on pinfile for direct IO
- fix to do sanity check on i_xattr_nid in sanity_check_inode()
- write missing last sum blk of file pinning section
- clear writeback when compression failed
- fix to adjust appropirate defragment pg_end
As usual, there are several minor code clean-ups, and fixes to manage
missing corner cases in the error paths"
* tag 'f2fs-for-6.10.rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (50 commits)
f2fs: initialize last_block_in_bio variable
f2fs: Add inline to f2fs_build_fault_attr() stub
f2fs: fix some ambiguous comments
f2fs: fix to add missing iput() in gc_data_segment()
f2fs: allow dirty sections with zero valid block for checkpoint disabled
f2fs: compress: don't allow unaligned truncation on released compress inode
f2fs: fix to release node block count in error path of f2fs_new_node_page()
f2fs: compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
f2fs: compress: fix error path of inc_valid_block_count()
f2fs: compress: fix typo in f2fs_reserve_compress_blocks()
f2fs: compress: fix to update i_compr_blocks correctly
f2fs: check validation of fault attrs in f2fs_build_fault_attr()
f2fs: fix to limit gc_pin_file_threshold
f2fs: remove unused GC_FAILURE_PIN
f2fs: use f2fs_{err,info}_ratelimited() for cleanup
f2fs: fix block migration when section is not aligned to pow2
f2fs: zone: fix to don't trigger OPU on pinfile for direct IO
f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode()
f2fs: fix to avoid allocating WARM_DATA segment for direct IO
f2fs: remove redundant parameter in is_next_segment_free()
...
|
||
|
|
119d1b8a5d |
New code for 6.10:
* Introduce Parent Pointer extended attribute for inodes.
* Online Repair
- Implement atomic file content exchanges i.e. exchange ranges of bytes
between two files atomically.
- Create temporary files to repair file-based metadata. This uses atomic
file content exchange facility to swap file fork mappings between the
temporary file and the metadata inode.
- Allow callers of directory/xattr code to set an explicit owner number to
be written into the header fields of any new blocks that are created.
This is required to avoid walking every block of the new structure and
modify their ownership during online repair.
- Repair
- Extended attributes
- Inode unlinked state
- Directories
- Symbolic links
- AGI's unlinked inode list.
- Parent pointers.
- Move Orphan files to lost and found directory.
- Fixes for Inode repair functionality.
- Introduce a new sub-AG FITRIM implementation to reduce the duration for
which the AGF lock is held.
- Updates for the design documentation.
- Use Parent Pointers to assist in checking directories, parent pointers,
extended attributes, and link counts.
* Bring back delalloc support for realtime devices which have an extent size
that is equal to filesystem's block size.
* Improve performance of log incompat feature handling.
* Fixes
- Prevent userspace from reading invalid file data due to incorrect.
updation of file size when performing a non-atomic clone operation.
- Minor fixes to online repair.
- Fix confusing return values from xfs_bmapi_write().
- Fix an out of bounds access due to incorrect h_size during log recovery.
- Defer upgrading the extent counters in xfs_reflink_end_cow_extent() until
we know we are going to modify the extent mapping.
- Remove racy access to if_bytes check in xfs_reflink_end_cow_extent().
- Fix sparse warnings.
* Cleanups
- Hold inode locks on all files involved in a rename until the completion
of the operation. This is in preparation for the parent pointers patchset
where parent pointers are applied in a separate chained update from the
actual directory update.
- Compile out v4 support when disabled.
- Cleanup xfs_extent_busy_clear().
- Remove unused flags and fields from struct xfs_da_args.
- Remove definitions of unused functions.
- Improve extended attribute validation.
- Add higher level directory operations helpers to remove duplication of
code.
- Cleanup quota (un)reservation interfaces.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZjZC0wAKCRAH7y4RirJu
9HsCAPoCQvmPefDv56aMb5JEQNpv9dPz2Djj14hqLytQs5P/twD+LF5NhJgQNDUo
Lwnb0tmkAhmG9Y4CCiN1FwSj1rq59gE=
=2hXB
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.10-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Chandan Babu:
"Online repair feature continues to be expanded. Also, we now support
delayed allocation for realtime devices which have an extent size that
is equal to filesystem's block size.
New code:
- Introduce Parent Pointer extended attribute for inodes
- Bring back delalloc support for realtime devices which have an
extent size that is equal to filesystem's block size
- Improve performance of log incompat feature handling
Online Repair:
- Implement atomic file content exchanges i.e. exchange ranges of
bytes between two files atomically
- Create temporary files to repair file-based metadata. This uses
atomic file content exchange facility to swap file fork mappings
between the temporary file and the metadata inode
- Allow callers of directory/xattr code to set an explicit owner
number to be written into the header fields of any new blocks that
are created. This is required to avoid walking every block of the
new structure and modify their ownership during online repair
- Repair more data structures:
- Extended attributes
- Inode unlinked state
- Directories
- Symbolic links
- AGI's unlinked inode list
- Parent pointers
- Move Orphan files to lost and found directory
- Fixes for Inode repair functionality
- Introduce a new sub-AG FITRIM implementation to reduce the duration
for which the AGF lock is held
- Updates for the design documentation
- Use Parent Pointers to assist in checking directories, parent
pointers, extended attributes, and link counts
Fixes:
- Prevent userspace from reading invalid file data due to incorrect.
updation of file size when performing a non-atomic clone operation
- Minor fixes to online repair
- Fix confusing return values from xfs_bmapi_write()
- Fix an out of bounds access due to incorrect h_size during log
recovery
- Defer upgrading the extent counters in xfs_reflink_end_cow_extent()
until we know we are going to modify the extent mapping
- Remove racy access to if_bytes check in
xfs_reflink_end_cow_extent()
- Fix sparse warnings
Cleanups:
- Hold inode locks on all files involved in a rename until the
completion of the operation. This is in preparation for the parent
pointers patchset where parent pointers are applied in a separate
chained update from the actual directory update
- Compile out v4 support when disabled
- Cleanup xfs_extent_busy_clear()
- Remove unused flags and fields from struct xfs_da_args
- Remove definitions of unused functions
- Improve extended attribute validation
- Add higher level directory operations helpers to remove duplication
of code
- Cleanup quota (un)reservation interfaces"
* tag 'xfs-6.10-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (221 commits)
xfs: simplify iext overflow checking and upgrade
xfs: remove a racy if_bytes check in xfs_reflink_end_cow_extent
xfs: upgrade the extent counters in xfs_reflink_end_cow_extent later
xfs: xfs_quota_unreserve_blkres can't fail
xfs: consolidate the xfs_quota_reserve_blkres definitions
xfs: clean up buffer allocation in xlog_do_recovery_pass
xfs: fix log recovery buffer allocation for the legacy h_size fixup
xfs: widen flags argument to the xfs_iflags_* helpers
xfs: minor cleanups of xfs_attr3_rmt_blocks
xfs: create a helper to compute the blockcount of a max sized remote value
xfs: turn XFS_ATTR3_RMT_BUF_SPACE into a function
xfs: use unsigned ints for non-negative quantities in xfs_attr_remote.c
xfs: do not allocate the entire delalloc extent in xfs_bmapi_write
xfs: fix xfs_bmap_add_extent_delay_real for partial conversions
xfs: remove the xfs_iext_peek_prev_extent call in xfs_bmapi_allocate
xfs: pass the actual offset and len to allocate to xfs_bmapi_allocate
xfs: don't open code XFS_FILBLKS_MIN in xfs_bmapi_write
xfs: lift a xfs_valid_startblock into xfs_bmapi_allocate
xfs: remove the unusued tmp_logflags variable in xfs_bmapi_allocate
xfs: fix error returns from xfs_bmapi_write
...
|
||
|
|
825d8bbd2f |
dm: always manage discard support in terms of max_hw_discard_sectors
Commit |
||
|
|
bb6b206216 |
\n
-----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmZLMxUACgkQnJ2qBz9k QNnnXAgA1MfUPm6b4AE3y3EEWUSTQd2THQSGUg/ZLeJW3zE5nNaW74BPYKTSTreY Bmx0QVrgzJX9EJe2UmFsnPiPEzznn1RIDdPwCQEZpjEt+/iX3/+5+z+aDK57mWpJ 5Lxzv/Ji1iNlYzdDti8MIc9edj923A7JpQQQ7Hz6ldmuc5EHXLrcTTzytPIDU5cp 6RKY7W0sntslTjKvVkZaEqugPtQpe064Sq7a0jtjLz2r+tyxDXakWNGrdQIYDTLR UGwsFFZL5JbnR12oCMKJ3Vh3YjA5gmyxlbHCghDtGkXrSS1mseumJYsRFazE7y+8 Fp1fbObLe1z22N742r1aNE8vtXLGUw== =nUBh -----END PGP SIGNATURE----- Merge tag 'fs_for_v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull isofs, udf, quota, ext2, and reiserfs updates from Jan Kara: - convert isofs to the new mount API - cleanup isofs Makefile - udf conversion to folios - some other small udf cleanups and fixes - ext2 cleanups - removal of reiserfs .writepage method - update reiserfs README file * tag 'fs_for_v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: isofs: Use *-y instead of *-objs in Makefile ext2: Remove LEGACY_DIRECT_IO dependency isofs: Remove calls to set/clear the error flag ext2: Remove call to folio_set_error() udf: Use a folio in udf_write_end() udf: Convert udf_page_mkwrite() to use a folio udf: Convert udf_symlink_getattr() to use a folio udf: Convert udf_adinicb_readpage() to udf_adinicb_read_folio() udf: Convert udf_expand_file_adinicb() to use a folio udf: Convert udf_write_begin() to use a folio udf: Convert udf_symlink_filler() to use a folio reiserfs: Trim some README bits quota: fix to propagate error of mark_dquot_dirty() to caller reiserfs: Convert to writepages udf: udftime: prevent overflow in udf_disk_stamp_to_time() ext2: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method udf: replace deprecated strncpy/strcpy with strscpy udf: Remove second semicolon isofs: convert isofs to use the new mount API fs: quota: use group allocation of per-cpu counters API |
||
|
|
69381cf88a |
dm-integrity: set discard_granularity to logical block size
dm-integrity could set discard_granularity lower than the logical block size. This could result in failures when sending discard requests to dm-integrity. This fix is needed for kernels prior to 6.10. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Eric Wheeler <linux-integrity@lists.ewheeler.net> Cc: stable@vger.kernel.org # <= 6.9 Signed-off-by: Mike Snitzer <snitzer@kernel.org> |
||
|
|
d0e71e23ec |
Revert "fanotify: remove unneeded sub-zero check for unsigned value"
This reverts commit
|
||
|
|
5af9d1cf39 |
\n
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmZLJS0ACgkQnJ2qBz9k
QNmFlggAlIg5oDZfOhJur6h3Icldrl2DsnKer0CAP7TFK+GfkFTEb25paoydBEu4
Y0VzZ3n3EqhmsJ8P515k1UPPPXlqqZwSRWGAek0FDhQCXhqEYxiWwf9U343hJNBS
rya4Rnwc1pxqmJU2hrY5R5kEbugUFAIL+qNXzhhLpWonYiy/ya7P5n/qz5F5HJH2
FufRRaPHcHFfk1u0+PvFrk019AS9C6Y3bkcUGtbpdwmFsuN3D4HKuLEkr1+C9Apb
NmkoAwCiSobQhAxGDr6Szqu6r1VCuM+n/O9fqLknnL9u0jm95AmGdIMOdQ/ofx6d
xn3mfRp8gUbPD8PubHhQsMjCmSjGwg==
=kwWW
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
- reduce overhead of fsnotify infrastructure when no permission events
are in use
- a few small cleanups
* tag 'fsnotify_for_v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: fix UAF from FS_ERROR event on a shutting down filesystem
fsnotify: optimize the case of no permission event watchers
fsnotify: use an enum for group priority constants
fsnotify: move s_fsnotify_connectors into fsnotify_sb_info
fsnotify: lazy attach fsnotify_sb_info state to sb
fsnotify: create helper fsnotify_update_sb_watchers()
fsnotify: pass object pointer and type to fsnotify mark helpers
fanotify: merge two checks regarding add of ignore mark
fsnotify: create a wrapper fsnotify_find_inode_mark()
fsnotify: create helpers to get sb and connp from object
fsnotify: rename fsnotify_{get,put}_sb_connectors()
fsnotify: Avoid -Wflex-array-member-not-at-end warning
fanotify: remove unneeded sub-zero check for unsigned value
|
||
|
|
88a1fc21df |
Coccinelle: pm_runtime: Fix grammar in comment
s/does not use unnecessary/do not unnecessarily use/ Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> |
||
|
|
e4655196e2 |
coccinelle: misc: minmax: Suppress reports for err returns
Most of the people prefer: return ret < 0 ? ret: 0; than: return min(ret, 0); Let's tweak the cocci file to ignore those lines completely. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> |
||
|
|
1ace99d7c7 |
regulator: tps6287x: Force writing VSEL bit
The data-sheet for TPS6287x-Q1
https://www.ti.com/lit/ds/symlink/tps62873-q1.pdf
states at chapter 9.3.6.1 Output Voltage Range:
"Note that every change to the VRANGE[1:0] bits must be followed by a
write to the VSET register, even if the value of the VSET[7:0] bits does
not change."
The current implementation of the driver uses the
regulator_set_voltage_sel_pickable_regmap() helper which further uses
regmap_update_bits() to write the VSET-register. The
regmap_update_bits() will not access the hardware if the new register
value is same as old. It is worth noting that this is true also when the
register is marked volatile, which I can't say is wrong because
'read-mnodify-write'-cycle with a volatile register is in any case
something user should carefully consider.
The 'range_applied_by_vsel'-flag in regulator desc was added to force
the vsel register upodates by using regmap_write_bits(). This variant
will always unconditionally write the bits to the hardware.
It is worth noting that the vsel is now forced to be written to the
hardware, whether the range was changed or not. This may cause a
performance drop if users are wrtiting same voltage value repeteadly.
It would be possible to read the range register to determine if it was
changed, but this would be a performance issue for users who don't use
reg cache for vsel.
Always write the VSET register to the hardware regardless the cache.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes:
|
||
|
|
80eb4f6205 |
erofs: avoid allocating DEFLATE streams before mounting
Currently, each DEFLATE stream takes one 32 KiB permanent internal
window buffer even if there is no running instance which uses DEFLATE
algorithm.
It's unexpected and wasteful on embedded devices with limited resources
and servers with hundreds of CPU cores if DEFLATE is enabled but unused.
Fixes:
|
||
|
|
aff5c01fa1 |
netfilter: nft_payload: restore vlan q-in-q match support
Revert |
||
|
|
c1193d9bbb |
netfilter: ipset: Add list flush to cancel_gc
Flushing list in cancel_gc drops references to other lists right away,
without waiting for RCU to destroy list. Fixes race when referenced
ipsets can't be destroyed while referring list is scheduled for destroy.
Fixes:
|
||
|
|
f4f4276f98 |
regulator: pickable ranges: don't always cache vsel
Some PMICs treat the vsel_reg same as apply-bit. Eg, when voltage range is changed, the new voltage setting is not taking effect until the vsel register is written. Add a flag 'range_applied_by_vsel' to the regulator desc to indicate this behaviour and to force the vsel value to be written to hardware if range was changed, even if the old selector was same as the new one. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://msgid.link/r/ZktCpcGZdgHWuN_L@fedora Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
|
daa121128a |
dma-mapping updates for Linux 6.10
- optimize DMA sync calls when they are no-ops (Alexander Lobakin) - fix swiotlb padding for untrusted devices (Michael Kelley) - add documentation for swiotb (Michael Kelley) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmZLV+gLHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYPO7hAAlKuXigzwcrVEUnfRGRdaZ28xbmffyC1dPfw8HRZe xJqvD51aJ/VOoOCcUyt3hNLEQHwtjEk4eM0xGcAASMdwceU58doJCcDJBpbbgbDK CPKJgBLQBC1JfAJUpRiJkV4RsudRhAyndIzUPVgkz0WObpEgDpfO0ClHRF/0Pavy 1sBFVFMbB1ewb/D8ffpp+DWfwrwu0oMC3A2LkYu2F5SQFWuVOpbNemrnZ6K2ckPt 2mcLpJ308+sti8Ka/LrI2akU8JCLYMYDQnue/44v3X3Gm63cMcEx/fj5M5x6m71n P+cxAkjsGDHybnfjbUvR842to8msRsH4CI4Zbb69+5HDlWSadM8JhQd74oeii6o6 RiGPrrFEk7vCxFOkUsqGFYMykEX+71wXfQ1Mpp/b4QgdqBLkxW4ozQ3Ya7ASUs2z TLLmQvIXtYKGnyU+RdOkvS6piHjd4wVHOhuGVdXqVT7WrbaPeovY4TNSTV2ZA1gE 9Y5RCdrX9xeGGNjsYXKwsWGvXVsm6UTQmQVUsatQb3ic+K3S6tQR9pwzk0HmhMuM BscWHSAEL7T8ZZ5Ydph45Cw/6xdH7LggD+nRtLcdAuzCika12eabZHsO0DrF533n qXYOjZOgsMEZWICynxq6+EGQKGWY+F+GyKDMU2w2Es5OgMa9Bqb40aSF+Q887s96 xwI= =Pa8W -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - optimize DMA sync calls when they are no-ops (Alexander Lobakin) - fix swiotlb padding for untrusted devices (Michael Kelley) - add documentation for swiotb (Michael Kelley) * tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping: dma: fix DMA sync for drivers not calling dma_set_mask*() xsk: use generic DMA sync shortcut instead of a custom one page_pool: check for DMA sync shortcut earlier page_pool: don't use driver-set flags field directly page_pool: make sure frag API fields don't span between cachelines iommu/dma: avoid expensive indirect calls for sync operations dma: avoid redundant calls for sync operations dma: compile-out DMA sync op calls when not used iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices swiotlb: remove alloc_size argument to swiotlb_tbl_map_single() Documentation/core-api: add swiotlb documentation |
||
|
|
6e51b4b5bb |
just cleanups and fixes
-----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmZLFXsaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHBRSg/+IOXU2beonMEctiRPXCGf Xleue4nol8iFyHa6BB3zVuMSUbE+/dJTcV0mNVZXeh5jFjFLGdeEQj1iRtzTZvlU Ktlk0ntnGlMGq069Sk29rA9qBK1HWiqTtu3196UYZqPtsY+BCZWNzr+ifzdJHouJ n1xcAUj4JTtaz7knIgz/c8TOABHNbWBpEvCHerlpOlO+B3BhBBwQZ10q1Uip7txW IQM/uleMsZWCNAoHOq26UdJxVXXXOYhjrKvHSzfmhBeitPGq52M0va1YYqUwtk+Z MR600LbqSGYtAYv1b9PAS5YhuAFUfQcwWSlaTYosNh91pNRld8UWPc1CTvBT1U8B oP/DlbJTp3Lq6+P7zUSN0Lg94NrnV60/nF2mkXH5Q8qpf2sGVvNyCbKQX47DCEkb YeHo28Jw0nSqtlOeqi83oplPyDsHI5//J+91ELgkYLukJM82qIeDOxjSfB4jr7FZ HbHuhZJUm1of8/rzZMVwpu9Hjb5cDe3AY1mUuatPKe0Kl7WIH+DfXi7eSnZ8d/bB lRo+wVb4iTisNK4hwy16e48pECuhpiMaGSZlzRYxa8s7DxzGfalnZvMOt/6YgEI0 G3eU/Ikqcl5UbQUWlt6lGu582YEtLReW01o+5sj9UW19K7aE/1V1pbRmzmuwDOaj 1jCV48o50Hya+P7TmptxKog= =Abcq -----END PGP SIGNATURE----- Merge tag 'mips_6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: "Just cleanups and fixes" * tag 'mips_6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (24 commits) MIPS: Take in account load hazards for HI/LO restoring MIPS: SGI-IP27: use WARN_ON() output MIPS: SGI-IP27: fix -Wunused-variable in arch_init_irq() MIPS: SGI-IP27: micro-optimize arch_init_irq() mips: dts: ralink: mt7621: reorder the attributes of the root node mips: dts: ralink: mt7621: reorder pci?_phy attributes mips: dts: ralink: mt7621: reorder pcie node attributes and children mips: dts: ralink: mt7621: reorder ethernet node attributes and kids mips: dts: ralink: mt7621: reorder gic node attributes mips: dts: ralink: mt7621: reorder mmc node attributes mips: dts: ralink: mt7621: move pinctrl and sort its children mips: dts: ralink: mt7621: reorder spi0 node attributes mips: dts: ralink: mt7621: reorder i2c node attributes mips: dts: ralink: mt7621: reorder gpio node attributes mips: dts: ralink: mt7621: reorder sysc node attributes mips: dts: ralink: mt7621: reorder mmc regulator attributes mips: dts: ralink: mt7621: reorder cpuintc node attributes mips: dts: ralink: mt7621: reorder cpu node attributes MIPS: Add prototypes for plat_post_relocation() and relocate_kernel() MIPS: Octeon: Add PCIe link status check ... |
||
|
|
80f9d90230 |
dmi updates for v6.10
* KCFI violation fix for dmi-id. * Stop decoding on broken (short) DMI table entry. * Print info about populated memory slots at boot. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEfKafRGDxvcQf0shYpVJrm7PNTmoFAmZLAu8ACgkQpVJrm7PN Tmp8Wg//XMaoayG186uacpSAo0o4CPuxHLLkj+k0fBR4RpS+E3NFDIJvwnfXGkun OSti2CgvAE4gyhccFFqJccrx/NqoOH7ruC6qdOZJbywdh+0LJEkBLQyB3do/kVwg drQS8yNo47VFW0PgpuDko82LY7S2WAnbMpwo67c2M5TfHcHNb0uff1I1q2tvPx37 CqCDfUForsS5JbyXIxz3VDxgGrb93ODQ8zopmFsM2VItFT74LM2b1j6p+DZeFqkv 1kpvJwzJSGbO/xyEaWU7h0ehIpy5bAVdT63UzQ8SnSxT3Og2SOWG0X3k9uyr0Wpt 3VvqGQSRTvnDE95myNyNl5AmQkxSdaQdeHXCA5WVpyw7FeYPo0JmbLKzhxxn0P2i t2qH+HMnt+wcq9rq8TZBwu8aWCfihB7W4AFkp7hidyZ8Byp62lYLWg01yaIU8DO1 Urkh7T5+JVjR1qGEm3jNmSy5mleNjHiRQvcuXpaYCBw5GkN2qUcoIMl4vI+fs373 Ul6uNHbAjq89DrDuSqmqs0jtZ2Ie48+wqmdfQ9++uV7cD3C5LGgMlIkgqkUrGaSU 0btk9J7Flt6c3kTyYjVjvxli+Kk5Jb1huPCyu7mbbaL7ujDLM2E+szFMqBJ0Fwua ApPfOm19fuCAuTcSwGMxx8rg2voMpfEtc4BQZpjmfOeq84dJAJg= =088k -----END PGP SIGNATURE----- Merge tag 'dmi-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi updates from Jean Delvare: "Bug fixes: - KCFI violation in dmi-id - stop decoding on broken (short) DMI table entry New features: - print info about populated memory slots at boot" * tag 'dmi-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi: Add info message for number of populated and total memory slots firmware: dmi: Stop decoding on broken entry firmware: dmi-id: add a release callback function |
||
|
|
a913d94eef |
linux-watchdog 6.10-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAmZLZDUACgkQ+iyteGJfRspfLwCfQ9zpNL4pAPdjG8bS8OKYSmeU OUAAnR28y57NBUsnA456Uqqv+dBc44vb =NBPL -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-6.10-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add Lenovo SE10 platform Watchdog Driver - Other small fixes and improvements * tag 'linux-watchdog-6.10-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: LENOVO_SE10_WDT should depend on X86 && DMI watchdog: sa1100: Fix PTR_ERR_OR_ZERO() vs NULL check in sa1100dog_probe() watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety margin watchdog: add HAS_IOPORT dependencies watchdog/wdt-main: Use cpumask_of() to avoid cpumask var on stack watchdog: bd9576: Drop "always-running" property watchdog: mtx-1: drop driver owner assignment watchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger watchdog: lenovo_se10_wdt: Watchdog driver for Lenovo SE10 platform |
||
|
|
0a07e09085 |
I2C core removes an argument from the i2c_mux_add_adapter() call to
further deprecate class based I2C device instantiation. All users are converted, too. Other that that, Andi collected a number if I2C host driver patches. Those merges have their own description. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmZLFfoACgkQFA3kzBSg KbaTlxAAq+VXWNEEK41X6SNVnzwm1H9zoq/vg92rQ1oKh/AUfO6W4pJTg3OQz0gT 4x5Z4yeRZwtWE7zdTQlQUdUvcj490cTUF9f7gTTeH0uhFCyECzOZSIpa4kG+A/mI JUCCVLMziq6rIscYFdomvKSzwitzhoCuLVsOthYgK3TvbbGH6FHe4h6MDP/u3ok7 seL7ZhqsudL26fFv5+U9095xM0OLDB1R7+DJXaibS6hY1/+WX3qMWHjCF7tf4gAr bHg/LaDNIiW2pwj7LFhaLrQzchxV/zPKRJYlO05M4mn9hxyVM9ztKtGPLRqglZEX yPqD857/Rac4y30PihWSVf4uG9pJWY0BEMjucuL0DZLX98C8kqJKK1SSi1FMd5qf ROAlCMQt+pSVcO6V9cEVIxzpJ2ZhAT4NM2T7yaGrdt6WX9W/an9hNqPcMUBVU6G2 Fzk960eftI/V+IRGswHuBD4w4duIlxUMWd5961UdI0LqzQrhzyNq3IZu/jpw49DH ZnJ/0UPkV9FfZvZpglf/ztlUESkCqWFjbxOfiejHCnUrvla5JGQTPXVTyP9p38X9 cxevlLgdsKz4F9WqEzpeI7L0HrxpTI863lmhFy+LuWYjYUfYSqIbiB0lWuCP+9Fy Cjnfp8KRp0lJD206Yyj4WC1B8xi1G44MkB2seGH7GtejM4I9A+U= =viLd -----END PGP SIGNATURE----- Merge tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "i2c core removes an argument from the i2c_mux_add_adapter() call to further deprecate class based I2C device instantiation. All users are converted, too. Other that that, Andi collected a number if I2C host driver patches. Those merges have their own description" * tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (72 commits) power: supply: sbs-manager: Remove class argument from i2c_mux_add_adapter() i2c: mux: Remove class argument from i2c_mux_add_adapter() i2c: synquacer: Fix an error handling path in synquacer_i2c_probe() i2c: acpi: Unbind mux adapters before delete i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE() i2c: pxa: use 'time_left' variable with wait_event_timeout() i2c: s3c2410: use 'time_left' variable with wait_event_timeout() i2c: rk3x: use 'time_left' variable with wait_event_timeout() i2c: qcom-geni: use 'time_left' variable with wait_for_completion_timeout() i2c: jz4780: use 'time_left' variable with wait_for_completion_timeout() i2c: synquacer: use 'time_left' variable with wait_for_completion_timeout() i2c: stm32f7: use 'time_left' variable with wait_for_completion_timeout() i2c: stm32f4: use 'time_left' variable with wait_for_completion_timeout() i2c: st: use 'time_left' variable with wait_for_completion_timeout() i2c: omap: use 'time_left' variable with wait_for_completion_timeout() i2c: imx-lpi2c: use 'time_left' variable with wait_for_completion_timeout() i2c: hix5hd2: use 'time_left' variable with wait_for_completion_timeout() i2c: exynos5: use 'time_left' variable with wait_for_completion_timeout() i2c: digicolor: use 'time_left' variable with wait_for_completion_timeout() i2c: amd-mp2-plat: use 'time_left' variable with wait_for_completion_timeout() ... |
||
|
|
2de68638aa |
Pin control changes for the v6.10 kernel cycle:
Core changes: - Use DEFINE_SHOW_STORE_ATTRIBUTE() in debugfs entries. New drivers: - Qualcomm PMIH0108, PMD8028, PMXR2230 and PM6450 pin control support. Improvements: - Serious cleanup of the recently merged aw9523 driver. - Fix PIN_CONFIG_BIAS_DISABLE handling in pinctrl-single. - A slew of device tree binding cleanups. - Support a bus clock in the Samsung driver. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmZLAM8ACgkQQRCzN7AZ XXNxcRAAhkMY+TH2J83NTFZ9ATMguQGaozLM3eGiVXGtOQmNqDo7aHmP/zTi+0Ve wC6UTQG0/s+MCkbEQPGN5DzEuEJxEJzWKiGjqNV4gl07QcHV8ZeSWu1lRHvW21PB LcRBYmw+wAI0tXCz5t3gAkjs8fc5Vj0uqbWdkgreukULbhikXLmcm5meQ9maZleT 9GSK/nDqfHahp9hmALz8n1/niPtF4JzNnEfVcVcnBFlX/oszD6vxc0foM0TBEWKI q3HYOj1tw0ei+ke01eTlivi+suXDkrw0bDLozWYtFMhs9juJbEhf2RkKKfs4r1iW gukzogalaUDEgFK9MRboCqNEbnRkX8yNZQhAVqt5Q0yhaepl2UVgLfGI9TwQY/17 r8f10fp7sKuf9bhRlVr+fMYT0M2QqowMgO8jpA+m4QeKrZKfYvuHFJUIKhtYV1zK 6lGicvu5LBIbF2NOmoFvp1XiiWnoD1abrHxmEH/HRfm62bOEQYO/KKWuDY3WIuNb xtgQmkt6+WFMF693ygKErbtJKAR3IlFVZ/3mgL1areKp0fOETxqRng0ImYOaFwTG gijYm9MLJIlzX/yht/X7V77Sp4kIPz6WCqBIIataHpvDbEL4SBGjLIv/H1+pXtxi SHSuOPygJLzURogkVeANWQ2jT9LJVR1A/m9xoeA2HejEOlbFMnA= =9Ty5 -----END PGP SIGNATURE----- Merge tag 'pinctrl-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Core changes: - Use DEFINE_SHOW_STORE_ATTRIBUTE() in debugfs entries New drivers: - Qualcomm PMIH0108, PMD8028, PMXR2230 and PM6450 pin control support Improvements: - Serious cleanup of the recently merged aw9523 driver - Fix PIN_CONFIG_BIAS_DISABLE handling in pinctrl-single - A slew of device tree binding cleanups - Support a bus clock in the Samsung driver" * tag 'pinctrl-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits) pinctrl: bcm2835: Make pin freeing behavior configurable dt-bindings: pinctrl: qcom,pmic-gpio: Fix "comptaible" typo for PMIH0108 pinctrl: qcom: pinctrl-sm7150: Fix sdc1 and ufs special pins regs dt-bindings: pinctrl: mediatek: mt7622: add "antsel" function dt-bindings: pinctrl: mediatek: mt7622: fix array properties pinctrl: samsung: drop redundant drvdata assignment pinctrl: samsung: support a bus clock dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock pinctrl: renesas: rzg2l: Limit 2.5V power supply to Ethernet interfaces pinctrl: renesas: r8a779h0: Add INTC-EX pins, groups, and function pinctrl: renesas: r8a779h0: Fix IRQ suffixes pinctrl: renesas: rzg2l: Remove extra space in function parameter dt-bindings: pinctrl: qcom,pmic-mpp: add support for PM8901 pinctrl: pinconf-generic: print hex value pinctrl: realtek: fix module autoloading pinctrl: qcom: sm7150: fix module autoloading pinctrl: loongson2: fix module autoloading pinctrl: mediatek: fix module autoloading pinctrl: freescale: imx8ulp: fix module autoloading dt-bindings: pinctrl: qcom,pmic-gpio: Allow gpio-hog nodes ... |