Drop the "If AD bits are enabled/disabled" verbiage from the comments
above kvm_tdp_mmu_clear_dirty_{slot,pt_masked}() since TDP MMU SPTEs may
need to be write-protected even when A/D bits are enabled. i.e. These
comments aren't technically correct.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240315230541.1635322-4-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the comments above clear_dirty_gfn_range() and
clear_dirty_pt_masked(), since each is word-for-word identical to the
comment above their parent function.
Leave the comment on the parent functions since they are APIs called by
the KVM/x86 MMU.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240315230541.1635322-3-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Check kvm_mmu_page_ad_need_write_protect() when deciding whether to
write-protect or clear D-bits on TDP MMU SPTEs, so that the TDP MMU
accounts for any role-specific reasons for disabling D-bit dirty logging.
Specifically, TDP MMU SPTEs must be write-protected when the TDP MMU is
being used to run an L2 (i.e. L1 has disabled EPT) and PML is enabled.
KVM always disables PML when running L2, even when L1 and L2 GPAs are in
the some domain, so failing to write-protect TDP MMU SPTEs will cause
writes made by L2 to not be reflected in the dirty log.
Reported-by: syzbot+900d58a45dcaab9e4821@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=900d58a45dcaab9e4821
Fixes: 5982a53926 ("KVM: x86/mmu: Use kvm_ad_enabled() to determine if TDP MMU SPTEs need wrprot")
Cc: stable@vger.kernel.org
Cc: Vipin Sharma <vipinsh@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240315230541.1635322-2-dmatlack@google.com
[sean: massage shortlog and changelog, tweak ternary op formatting]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Set kvm_mmu_page_role.invalid to mark the various MMU root_roles invalid
during CPUID update in order to force a refresh, instead of zeroing out
the entire role. This fixes a bug where kvm_mmu_free_roots() incorrectly
thinks a root is indirect, i.e. not a TDP MMU, due to "direct" being
zeroed, which in turn causes KVM to take mmu_lock for write instead of
read.
Note, paving over the entire role was largely unintentional, commit
7a458f0e1b ("KVM: x86/mmu: remove extended bits from mmu_role, rename
field") simply missed that "invalid" could be set.
Fixes: 576a15de8d ("KVM: x86/mmu: Free TDP MMU roots while holding mmy_lock for read")
Reported-by: syzbot+dc308fcfcd53f987de73@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/0000000000009b38080614c49bdb@google.com
Cc: Phi Nguyen <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20240408231115.1387279-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Disable LBR virtualization if the CPU doesn't support callstacks, which
were introduced in HSW (see commit e9d7f7cd97 ("perf/x86/intel: Add
basic Haswell LBR call stack support"), as KVM unconditionally configures
the perf LBR event with PERF_SAMPLE_BRANCH_CALL_STACK, i.e. LBR
virtualization always fails on pre-HSW CPUs.
Simply disable LBR support on such CPUs, as it has never worked, i.e.
there is no risk of breaking an existing setup, and figuring out a way
to performantly context switch LBRs on old CPUs is not worth the effort.
Fixes: be635e34c2 ("KVM: vmx/pmu: Expose LBR_FMT in the MSR_IA32_PERF_CAPABILITIES")
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Jim Mattson <jmattson@google.com>
Tested-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20240307011344.835640-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a "has_callstack" field to the x86_pmu_lbr structure used to pass
information to KVM, and set it accordingly in x86_perf_get_lbr(). KVM
will use has_callstack to avoid trying to create perf LBR events with
PERF_SAMPLE_BRANCH_CALL_STACK on CPUs that don't support callstacks.
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20240307011344.835640-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Snapshot VMX's LBR capabilities once during module initialization instead
of calling into perf every time a vCPU reconfigures its vPMU. This will
allow massaging the LBR capabilities, e.g. if the CPU doesn't support
callstacks, without having to remember to update multiple locations.
Opportunistically tag vmx_get_perf_capabilities() with __init, as it's
only called from vmx_set_cpu_caps().
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20240307011344.835640-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Geliang Tang says:
====================
v5:
- address Martin's comments for v4 (thanks).
- update patch 2, use 'return err' instead of 'return -1/0'.
- drop patch 3 in v4.
v4:
- fix a bug in v3, it should be 'if (err)', not 'if (!err)'.
- move "selftests/bpf: Use log_err in network_helpers" out of this
series.
v3:
- add two more patches.
- use log_err instead of ASSERT in v3.
- let send_recv_data return int as Martin suggested.
v2:
Address Martin's comments for v1 (thanks.)
- drop patch 1, "export send_byte helper".
- drop "WRITE_ONCE(arg.stop, 0)".
- rebased.
send_recv_data will be re-used in MPTCP bpf tests, but not included
in this set because it depends on other patches that have not been
in the bpf-next yet. It will be sent as another set soon.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch extracts the code to send and receive data into a new
helper named send_recv_data() in network_helpers.c and export it
in network_helpers.h.
This helper will be used for MPTCP BPF selftests.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/5231103be91fadcce3674a589542c63b6a5eedd4.1712813933.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
- Modify the ACPI device enumeration code to avoid counting
dependencies that have been met already as unmet (Hans de Goede).
- Make _UID matching take the integer value of 0 into account as
appropriate (Raag Jadav).
-----BEGIN PGP SIGNATURE-----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=94Dn
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix the handling of dependencies between devices in the ACPI
device enumeration code and address a _UID matching regression from
the 6.8 development cycle.
Specifics:
- Modify the ACPI device enumeration code to avoid counting
dependencies that have been met already as unmet (Hans de Goede)
- Make _UID matching take the integer value of 0 into account as
appropriate (Raag Jadav)"
* tag 'acpi-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: bus: allow _UID matching for integer zero
ACPI: scan: Do not increase dep_unmet for already met dependencies
Fix the suspend-to-idle core code to guarantee that timers queued on
CPUs other than the one that has first left the idle state, which should
expire directly after resume, will be handled (Anna-Maria Behnsen).
-----BEGIN PGP SIGNATURE-----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=8DDE
-----END PGP SIGNATURE-----
Merge tag 'pm-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix the suspend-to-idle core code to guarantee that timers queued on
CPUs other than the one that has first left the idle state, which
should expire directly after resume, will be handled (Anna-Maria
Behnsen)"
* tag 'pm-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: s2idle: Make sure CPUs will wakeup directly on resume
Current release - new code bugs:
- netfilter: complete validation of user input
- mlx5: disallow SRIOV switchdev mode when in multi-PF netdev
Previous releases - regressions:
- core: fix u64_stats_init() for lockdep when used repeatedly in one file
- ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr
- bluetooth: fix memory leak in hci_req_sync_complete()
- batman-adv: avoid infinite loop trying to resize local TT
- drv: geneve: fix header validation in geneve[6]_xmit_skb
- drv: bnxt_en: fix possible memory leak in bnxt_rdma_aux_device_init()
- drv: mlx5: offset comp irq index in name by one
- drv: ena: avoid double-free clearing stale tx_info->xdpf value
- drv: pds_core: fix pdsc_check_pci_health deadlock
Previous releases - always broken:
- xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING
- bluetooth: fix setsockopt not validating user input
- af_unix: clear stale u->oob_skb.
- nfc: llcp: fix nfc_llcp_setsockopt() unsafe copies
- drv: virtio_net: fix guest hangup on invalid RSS update
- drv: mlx5e: Fix mlx5e_priv_init() cleanup flow
- dsa: mt7530: trap link-local frames regardless of ST Port State
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=a9bB
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth.
Current release - new code bugs:
- netfilter: complete validation of user input
- mlx5: disallow SRIOV switchdev mode when in multi-PF netdev
Previous releases - regressions:
- core: fix u64_stats_init() for lockdep when used repeatedly in one
file
- ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr
- bluetooth: fix memory leak in hci_req_sync_complete()
- batman-adv: avoid infinite loop trying to resize local TT
- drv: geneve: fix header validation in geneve[6]_xmit_skb
- drv: bnxt_en: fix possible memory leak in
bnxt_rdma_aux_device_init()
- drv: mlx5: offset comp irq index in name by one
- drv: ena: avoid double-free clearing stale tx_info->xdpf value
- drv: pds_core: fix pdsc_check_pci_health deadlock
Previous releases - always broken:
- xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING
- bluetooth: fix setsockopt not validating user input
- af_unix: clear stale u->oob_skb.
- nfc: llcp: fix nfc_llcp_setsockopt() unsafe copies
- drv: virtio_net: fix guest hangup on invalid RSS update
- drv: mlx5e: Fix mlx5e_priv_init() cleanup flow
- dsa: mt7530: trap link-local frames regardless of ST Port State"
* tag 'net-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
net: ena: Set tx_info->xdpf value to NULL
net: ena: Fix incorrect descriptor free behavior
net: ena: Wrong missing IO completions check order
net: ena: Fix potential sign extension issue
af_unix: Fix garbage collector racing against connect()
net: dsa: mt7530: trap link-local frames regardless of ST Port State
Revert "s390/ism: fix receive message buffer allocation"
net: sparx5: fix wrong config being used when reconfiguring PCS
net/mlx5: fix possible stack overflows
net/mlx5: Disallow SRIOV switchdev mode when in multi-PF netdev
net/mlx5e: RSS, Block XOR hash with over 128 channels
net/mlx5e: Do not produce metadata freelist entries in Tx port ts WQE xmit
net/mlx5e: HTB, Fix inconsistencies with QoS SQs number
net/mlx5e: Fix mlx5e_priv_init() cleanup flow
net/mlx5e: RSS, Block changing channels number when RXFH is configured
net/mlx5: Correctly compare pkt reformat ids
net/mlx5: Properly link new fs rules into the tree
net/mlx5: offset comp irq index in name by one
net/mlx5: Register devlink first under devlink lock
net/mlx5: E-switch, store eswitch pointer before registering devlink_param
...
The most important fix is the sg one because the regression it fixes
(spurious warning and use after final put) is already backported to
stable. The next biggest impact is the target fix for wrong
credentials used to load a module because it's affecting new kernels
installed on selinux based distributions. The other three fixes are
an obvious off by one and SATA protocol issues.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZhfZJyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaOtAQCADxSy
dAO9ygAEEoz25FXPUvJquzBhwuiFMy878fdd7AD8DNYBs7p5mo+1omWqpLpa0l6Z
3ZXOBQ6JiuDOx6iKSiQ=
=+qtC
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The most important fix is the sg one because the regression it fixes
(spurious warning and use after final put) is already backported to
stable.
The next biggest impact is the target fix for wrong credentials used
to load a module because it's affecting new kernels installed on
selinux based distributions.
The other three fixes are an obvious off by one and SATA protocol
issues"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix off by one in qla_edif_app_getstats()
scsi: hisi_sas: Modify the deadline for ata_wait_after_reset()
scsi: hisi_sas: Handle the NCQ error returned by D2H frame
scsi: target: Fix SELinux error when systemd-modules loads the target module
scsi: sg: Avoid race in error handling & drop bogus warn
-----BEGIN PGP SIGNATURE-----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=tiT2
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- make {virt, phys, page, pfn} translation work with KFENCE for
LoongArch (otherwise NVMe and virtio-blk cannot work with KFENCE
enabled)
- update dts files for Loongson-2K series to make devices work
correctly
- fix a build error
* tag 'loongarch-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Include linux/sizes.h in addrspace.h to prevent build errors
LoongArch: Update dts for Loongson-2K2000 to support GMAC/GNET
LoongArch: Update dts for Loongson-2K2000 to support PCI-MSI
LoongArch: Update dts for Loongson-2K2000 to support ISA/LPC
LoongArch: Update dts for Loongson-2K1000 to support ISA/LPC
LoongArch: Make virt_addr_valid()/__virt_addr_valid() work with KFENCE
LoongArch: Make {virt, phys, page, pfn} translation work with KFENCE
mm: Move lowmem_page_address() a little later
Notable user impacting bugs
- On multi device filesystems, recovery was looping in
btree_trans_too_many_iters(). This checks if a transaction has touched
too many btree paths (because of iteration over many keys), and isuses
a restart to drop unneeded paths. But it's now possible for some paths
to exceed the previous limit without iteration in the interior btree
update path, since the transaction commit will do alloc updates for
every old and new btree node, and during journal replay we don't use
the btree write buffer for locking reasons and thus those updates use
btree paths when they wouldn't normally.
- Fix a corner case in rebalance when moving extents on a durability=0
device. This wouldn't be hit when a device was formatted with
durability=0 since in that case we'll only use it as a write through
cache (only cached extents will live on it), but durability can now be
changed on an existing device.
- bch2_get_acl() could rarely forget to handle a transaction restart;
this manifested as the occasional missing acl that came back after
dropping caches.
- Fix a major performance regression on high iops multithreaded write
workloads (only since 6.9-rc1); a previous fix for a deadlock in the
interior btree update path to check the journal watermark introduced a
dependency on the state of btree write buffer flushing that we didn't
want.
- Assorted other repair paths and recovery fixes.
-----BEGIN PGP SIGNATURE-----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=BQC0
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-04-10' of https://evilpiepirate.org/git/bcachefs
Pull more bcachefs fixes from Kent Overstreet:
"Notable user impacting bugs
- On multi device filesystems, recovery was looping in
btree_trans_too_many_iters(). This checks if a transaction has
touched too many btree paths (because of iteration over many keys),
and isuses a restart to drop unneeded paths.
But it's now possible for some paths to exceed the previous limit
without iteration in the interior btree update path, since the
transaction commit will do alloc updates for every old and new
btree node, and during journal replay we don't use the btree write
buffer for locking reasons and thus those updates use btree paths
when they wouldn't normally.
- Fix a corner case in rebalance when moving extents on a
durability=0 device. This wouldn't be hit when a device was
formatted with durability=0 since in that case we'll only use it as
a write through cache (only cached extents will live on it), but
durability can now be changed on an existing device.
- bch2_get_acl() could rarely forget to handle a transaction restart;
this manifested as the occasional missing acl that came back after
dropping caches.
- Fix a major performance regression on high iops multithreaded write
workloads (only since 6.9-rc1); a previous fix for a deadlock in
the interior btree update path to check the journal watermark
introduced a dependency on the state of btree write buffer flushing
that we didn't want.
- Assorted other repair paths and recovery fixes"
* tag 'bcachefs-2024-04-10' of https://evilpiepirate.org/git/bcachefs: (25 commits)
bcachefs: Fix __bch2_btree_and_journal_iter_init_node_iter()
bcachefs: Kill read lock dropping in bch2_btree_node_lock_write_nofail()
bcachefs: Fix a race in btree_update_nodes_written()
bcachefs: btree_node_scan: Respect member.data_allowed
bcachefs: Don't scan for btree nodes when we can reconstruct
bcachefs: Fix check_topology() when using node scan
bcachefs: fix eytzinger0_find_gt()
bcachefs: fix bch2_get_acl() transaction restart handling
bcachefs: fix the count of nr_freed_pcpu after changing bc->freed_nonpcpu list
bcachefs: Fix gap buffer bug in bch2_journal_key_insert_take()
bcachefs: Rename struct field swap to prevent macro naming collision
MAINTAINERS: Add entry for bcachefs documentation
Documentation: filesystems: Add bcachefs toctree
bcachefs: JOURNAL_SPACE_LOW
bcachefs: Disable errors=panic for BCH_IOCTL_FSCK_OFFLINE
bcachefs: Fix BCH_IOCTL_FSCK_OFFLINE for encrypted filesystems
bcachefs: fix rand_delete unit test
bcachefs: fix ! vs ~ typo in __clear_bit_le64()
bcachefs: Fix rebalance from durability=0 device
bcachefs: Print shutdown journal sequence number
...
Avoid setting total_bytes and stop as global variables, this patch adds
a new struct named send_recv_arg to pass arguments between threads. Put
these two variables together with fd into this struct and pass it to
server thread, so that server thread can access these two variables without
setting them as global ones.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/ca1dd703b796f6810985418373e750f7068b4186.1712813933.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When I was creating this driver, my bright mind overlooked the existence
of desc->qos_offset and decided to make up for the difference it made by
adding 21 (0x15) to the port index on SNoC and its downstream buses.
Undo this mistake to make the indices actually mean something.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240326-topic-rpm_icc_qos_cleanup-v1-1-357e736792be@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
To pick up the changes from:
fb091ff394 ("arm64: Subscribe Microsoft Azure Cobalt 100 to ARM Neoverse N2 errata")
This should address these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240408185520.1550865-10-namhyung@kernel.org
To pick up the changes from:
598c2fafc0 ("perf/x86/amd/lbr: Use freeze based on availability")
7f274e609f ("x86/cpufeatures: Add new word for scattered features")
This should address these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
diff -u tools/arch/x86/include/asm/required-features.h arch/x86/include/asm/required-features.h
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240408185520.1550865-6-namhyung@kernel.org
To pick up the changes from:
85df6b5a66 ("ALSA: pcm: clarify and fix default msbits value for all formats")
This should be used to beautify sound syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: linux-sound@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240408185520.1550865-5-namhyung@kernel.org
To pick up the changes from:
6bda055d62 ("KVM: define __KVM_HAVE_GUEST_DEBUG unconditionally")
5d9cb71642 ("KVM: arm64: move ARM-specific defines to uapi/asm/kvm.h")
71cd774ad2 ("KVM: s390: move s390-specific structs to uapi/asm/kvm.h")
d750951c9e ("KVM: powerpc: move powerpc-specific structs to uapi/asm/kvm.h")
bcac047727 ("KVM: x86: move x86-specific structs to uapi/asm/kvm.h")
c0a411904e ("KVM: remove more traces of device assignment UAPI")
f3c80061c0 ("KVM: SEV: fix compat ABI for KVM_MEMORY_ENCRYPT_OP")
That should be used to beautify the KVM arguments and it addresses these
tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240408185520.1550865-4-namhyung@kernel.org
To pick up the changes from:
41bcbe59c3 ("fs: FS_IOC_GETUUID")
ae8c511757 ("fs: add FS_IOC_GETFSSYSFSPATH")
73fa7547c7 ("vfs: add RWF_NOAPPEND flag for pwritev2")
This should be used to beautify fs syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240408185520.1550865-3-namhyung@kernel.org
To pick up changes from:
b112364867 ("drm/i915: Add GuC submission interface version query")
5cf0fbf763 ("drm/i915: Add some boring kerneldoc")
This should be used to beautify DRM syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240408185520.1550865-2-namhyung@kernel.org
I got a report for a failure in BPF verifier on a recent kernel with
perf lock contention command. It checks task->sighand->siglock without
checking if sighand is NULL or not. Let's add one.
; if (&curr->sighand->siglock == (void *)lock)
265: (79) r1 = *(u64 *)(r0 +2624) ; frame1: R0_w=trusted_ptr_task_struct(off=0,imm=0)
; R1_w=rcu_ptr_or_null_sighand_struct(off=0,imm=0)
266: (b7) r2 = 0 ; frame1: R2_w=0
267: (0f) r1 += r2
R1 pointer arithmetic on rcu_ptr_or_null_ prohibited, null-check it first
processed 164 insns (limit 1000000) max_states_per_insn 1 total_states 15 peak_states 15 mark_read 5
-- END PROG LOAD LOG --
libbpf: prog 'contention_end': failed to load: -13
libbpf: failed to load object 'lock_contention_bpf'
libbpf: failed to load BPF skeleton 'lock_contention_bpf': -13
Failed to load lock-contention BPF skeleton
lock contention BPF setup failed
lock contention did not detect any lock contention
Fixes: 1811e82767 ("perf lock contention: Track and show siglock with address")
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240409225542.1870999-1-namhyung@kernel.org
This patch fixes the following "umount cgroup2" error in test_sockmap.c:
(cgroup_helpers.c:353: errno: Device or resource busy) umount cgroup2
Cgroup fd cg_fd should be closed before cleanup_cgroup_environment().
Fixes: 13a5f3ffd2 ("bpf: Selftests, sockmap test prog run without setting cgroup")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/0399983bde729708773416b8488bac2cd5e022b8.1712639568.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When the manager becomes pm_runtime active in the remove procedure,
peripherals will become attached, and do the initialization
process. We have to wait until all the devices are fully resumed
before the cleanup, otherwise there is a possible race condition where
asynchronous workqueues initiate transfers on the bus that cannot
complete. This will ensure there are no SoundWire registers accessed
after the bus is powered-down.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240410023438.487017-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We need to wait for each child to fully resume. pm_request_resume() is
asynchronous, what we need is to wait synchronously to avoid race
conditions.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240410023438.487017-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SoundWire interrupts can be masked at two levels
a) in the Cadence IP
b) at the HDaudio controller level
We have an existing mechanism with cancel_work_sync() and status flags
to make sure all existing interrupts are handled in the Cadence IP,
and likewise no new interrupts can be generated before turning off the
links.
However on remove we first use the higher-level mask at the controller
level, which is a sledgehammer preventing interrupts from all
links. This is very racy and not necessary. We can disable the
SoundWire interrupts after all the cleanups are done without any loss
of functionality.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240410023438.487017-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The scope of set_pte_at_notify() has reduced more and more through the
years. Initially, it was meant for when the change to the PTE was
not bracketed by mmu_notifier_invalidate_range_{start,end}(). However,
that has not been so for over ten years. During all this period
the only implementation of .change_pte() was KVM and it
had no actual functionality, because it was called after
mmu_notifier_invalidate_range_start() zapped the secondary PTE.
Now that this (nonfunctional) user of the .change_pte() callback is
gone, the whole callback can be removed. For now, leave in place
set_pte_at_notify() even though it is just a synonym for set_pte_at().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240405115815.3226315-4-pbonzini@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only user was kvm_mmu_notifier_change_pte(), which is now gone.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240405115815.3226315-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The .change_pte() MMU notifier callback was intended as an
optimization. The original point of it was that KSM could tell KVM to flip
its secondary PTE to a new location without having to first zap it. At
the time there was also an .invalidate_page() callback; both of them were
*not* bracketed by calls to mmu_notifier_invalidate_range_{start,end}(),
and .invalidate_page() also doubled as a fallback implementation of
.change_pte().
Later on, however, both callbacks were changed to occur within an
invalidate_range_start/end() block.
In the case of .change_pte(), commit 6bdb913f0a ("mm: wrap calls to
set_pte_at_notify with invalidate_range_start and invalidate_range_end",
2012-10-09) did so to remove the fallback from .invalidate_page() to
.change_pte() and allow sleepable .invalidate_page() hooks.
This however made KVM's usage of the .change_pte() callback completely
moot, because KVM unmaps the sPTEs during .invalidate_range_start()
and therefore .change_pte() has no hope of finding a sPTE to change.
Drop the generic KVM code that dispatches to kvm_set_spte_gfn(), as
well as all the architecture specific implementations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anup Patel <anup@brainfault.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20240405115815.3226315-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The page has been marked clean before writepage is called. If we don't
redirty it before postponing the write, it might never get written.
Cc: stable@vger.kernel.org
Fixes: 503d4fa6ee ("ceph: remove reliance on bdi congestion")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The symbol__annotate2() initializes some data structures needed by TUI.
It has a logic to prevent calling it multiple times by checking if it
has the annotated source. But data type profiling uses a different
code (symbol__annotate) to allocate the annotated lines in advance.
So TUI missed to call symbol__annotate2() when it shows the annotation
browser.
Make symbol__annotate() reentrant and handle that situation properly.
This fixes a crash in the annotation browser started by perf report in
TUI like below.
$ perf report -s type,sym --tui
# and press 'a' key and then move down
Fixes: 81e57deec3 ("perf report: Support data type profiling")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240405211800.1412920-2-namhyung@kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-18-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow the caller to set the initial state of the VM. Doing this
before sev_vm_launch() matters for SEV-ES, since that is the
place where the VMSA is updated and after which the guest state
becomes sealed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-17-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This removes the concept of "subtypes", instead letting the tests use proper
VM types that were recently added. While the sev_init_vm() and sev_es_init_vm()
are still able to operate with the legacy KVM_SEV_INIT and KVM_SEV_ES_INIT
ioctls, this is limited to VMs that are created manually with
vm_create_barebones().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
