Using the sof_ipc4_timestamp_info struct directly as sps->private data
is too restrictive, add a new generic sof_ipc4_pcm_stream_priv struct
containing the time_info to allow new information to be stored in a
generic way.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240409110036.9411-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pointer to sof_ipc4_timestamp_info named most of the time as
'time_info' only to be named as 'stream_info' or 'info' in two function.
Use the consistent name of 'time_info' throughout the file.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240409110036.9411-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Throughout the file the pointer for snd_sof_pcm_stream is named either
'stream' or (wrongly) 'spcm' which confuses the reader.
Use 'sps' for the pointer name as it is the most common name used in SOF
codebase.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://msgid.link/r/20240409110036.9411-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the "ATH12k" word to "ATH12K" for consistent capitalization in the
word.
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240405144524.1157122-1-quic_periyasa@quicinc.com
Now that all infrastructure is in place and ath11k is fixed to handle all the
corner cases, power down the ath11k firmware during suspend and power it back
up during resume. This fixes the problem when using hibernation with ath11k PCI
devices.
For suspend, two conditions needs to be satisfied:
1. since MHI channel unprepare would be done in late suspend stage,
ath11k needs to get all QMI-dependent things done before that stage.
2. and because unprepare MHI channels requires a working MHI stack,
ath11k is not allowed to call mhi_power_down() until that finishes.
So the original suspend callback is separated into two parts: the first part
handles all QMI-dependent things in suspend callback; while the second part
powers down MHI in suspend_late callback. This is valid because kernel calls
ath11k's suspend callback before all suspend_late callbacks, making the first
condition happy. And because MHI devices are children of ath11k device
(ab->dev), kernel guarantees that ath11k's suspend_late callback is called
after QRTR's suspend_late callback, this satisfies the second condition.
Above analysis also applies to resume process. so the original resume
callback is separated into two parts: the first part powers up MHI stack
in resume_early callback, this guarantees MHI stack is working when
QRTR tries to prepare MHI channels (kernel calls QRTR's resume_early callback
after ath11k's resume_early callback, due to the child-father relationship);
the second part waits for the completion of restart, which won't fail now
since MHI channels are ready for use by QMI.
Another notable change is in power down path, we tell mhi_power_down() to not
to destroy MHI devices, making it possible for QRTR to help unprepare/prepare
MHI channels, and finally get us rid of the probe-defer issue when resume.
Also change related code due to interface changes.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240305021320.3367-4-quic_bqiang@quicinc.com
MHI devices may not be destroyed during suspend/hibernation, so need
to unprepare/prepare MHI channels throughout the transition, this is
done by adding suspend/resume callbacks.
The suspend callback is called in the late suspend stage, this means
MHI channels are still alive at suspend stage, and that makes it
possible for an MHI controller driver to communicate with others over
those channels at suspend stage. While the resume callback is called
in the early resume stage, for a similar reason.
Also note that we won't do unprepare/prepare when MHI device is in
suspend state because it's pointless if MHI is only meant to go through
a suspend/resume transition, instead of a complete power cycle.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240305021320.3367-3-quic_bqiang@quicinc.com
Instead of passing a naked __le16 * around to represent a CD table entry
wrap it in a "struct arm_smmu_cd" with an array of the correct size. This
makes it much clearer which functions will comprise the "CD API".
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
At this point we know which master we are going to change the PCI config
on, this is the only device we need to invalidate. Switch
arm_smmu_atc_inv_domain() for arm_smmu_atc_inv_master().
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The SVA code is wired to assume that the SVA is programmed onto the
mm->pasid. The current core code always does this, so it is fine.
Add a check for clarity.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v6-228e7adf25eb+4155-smmuv3_newapi_p2_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Horatiu Vultur says:
====================
net: phy: micrel: lan8814: Enable PTP_PF_PEROUT
Add support for PTP_PF_PEROUT to lan8814. First patch just enables
the LTC at probe time, such that it is not required to enable
timestamping to have the LTC enabled. While the second patch actually
adds support for PTP_PF_PEROUT.
====================
Link: https://lore.kernel.org/r/20240408064432.3881636-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lan8814 has 24 GPIOs but only 2 GPIOs (GPIO 0 and GPIO 1) can be
configured to generate period signals. And there are 2 events (EVENT_A
and EVENT_B) but these events are hardcoded to the GPIO 0 and GPIO 1.
These events are used to generate period signals. It is possible to
configure the length, the start time and the period of the signal by
configuring the event.
These events are generated by comparing the target time with the PHC
time. In case the PHC time is changed to a value bigger than the target
time + reload time, then it would generate only 1 event and then it
would stop because target time + reload time is smaller than PHC time.
Therefore it is required to change also the target time every time when
the PHC is changed. The same will apply also when the PHC time is
changed to a smaller value.
This was tested using:
testptp -i 1 -L 1,2
testptp -i 1 -p 1000000000 -w 200000000
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The LTC for lan8814 was enabled only if timestamping was enabled,
otherwise it would be stopped. Meaning that LTC will not increase by
itself. This might break other features that don't required timestamping
like generating 1PPS. Therefore enable the LTC at probe time.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The dwmac supports specifying the RGMII clock delays, but it is
recommended to use rgmii-id and to specify the delays in the phy node
instead [1].
Change the example accordingly to no longer promote this undesired
setting.
[1] https://lore.kernel.org/all/1a0de7b4-f0f7-4080-ae48-f5ffa9e76be3@lunn.ch/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240408-rockchip-dwmac-rgmii-id-binding-v1-1-3886d1a8bd54@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Enable GuC Wa_14019882105 to block interrupts during C6 flow
when the memory path has been blocked
v2: Make helper function generic and name it as
guc_waklv_enable_simple (John Harrison)
v3: Make warning descriptive (John Harrison)
v4: s/drm_WARN/xe_gt_WARN/ (Michal)
Cc: John Harrison <john.harrison@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405084231.3620848-3-badal.nilawar@intel.com
To prevent running out of bits, new workaround (w/a) enable flags are
being added via a KLV system instead of a 32 bit flags word.
v2: GuC version check > 70.10 is not needed as base line xe doesnot
support anything below < 70.19
v3: Use 64 bit ggtt address for future
compatibility (John Harrison/Daniele)
v4: %s/PAGE_SIZE/SZ_4K/ (Michal)
Cc: John Harrison <John.C.Harrison@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405084231.3620848-2-badal.nilawar@intel.com
U64_MAX is not in include/vdso/limits.h, although that isn't noticed on x86
because x86 includes include/linux/limits.h indirectly. However powerpc is
more selective, resulting in the following build error:
In file included from <command-line>:
lib/vdso/gettimeofday.c: In function 'vdso_calc_ns':
lib/vdso/gettimeofday.c:11:33: error: 'U64_MAX' undeclared
11 | # define VDSO_DELTA_MASK(vd) U64_MAX
| ^~~~~~~
Use ULLONG_MAX instead which will work just as well and is in
include/vdso/limits.h.
Fixes: c8e3a8b6f2 ("vdso: Consolidate vdso_calc_delta()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240409062639.3393-1-adrian.hunter@intel.com
Closes: https://lore.kernel.org/all/20240409124905.6816db37@canb.auug.org.au/
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or
sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240314100402.1326582-2-lizhijian@fujitsu.com
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or
sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240314100402.1326582-1-lizhijian@fujitsu.com
Currently, the __d_clear_type_and_inode() writes the value flags to
dentry->d_flags, then immediately re-reads it in order to use it in a if
statement. This re-read is useless because no other update to
dentry->d_flags can occur at this point.
This commit therefore re-use flags in the if statement instead of
re-reading dentry->d_flags.
Signed-off-by: linke li <lilinke99@qq.com>
Link: https://lore.kernel.org/r/tencent_5E187BD0A61BA28605E85405F15228254D0A@qq.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The disable_bypass parameter has been mostly meaningless for a long time
since the introduction of default domains. Its original intent is now
fulfilled by the controls users have over the default domain type, and
its remaining effect in the brief window between Stream Table
initialisation and default domain creation hardly seems worth the
complication. Furthermore, thanks to 2-level Stream Tables, disabling
disable_bypass (there's another reason not to like it right there) has
never guaranteed that any particular StreamID *will* bypass anyway - any
device which might actually care about that wants RMRs - so there's not
really much lost by taking away that option (which has already been
non-default for nearing 6 years now).
As part of this, also remove the weird behaviour where we "successfully"
probe and register a non-functional SMMU if the DT "#iommu-cells"
property is wrong. I have no memory of what possessed me to think that
was a good idea at the time, and by now I suspect it's likely to break
things worse than simply failing probe would.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/ea3ac4cd595a81b5511729601b2f7d4668178438.1712335927.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
These IOCTL commands should be implemented by setting attributes on the
superblock, rather than in the IOCTL hooks in struct file_operations.
By returning -ENOTTY instead of -ENOIOCTLCMD, we instruct the fs/ioctl.c
logic to return -ENOTTY immediately, rather than attempting to call
f_op->unlocked_ioctl() or f_op->compat_ioctl() as a fallback.
Why this is safe:
Before this change, fs/ioctl.c would unsuccessfully attempt calling the
IOCTL hooks, and then return -ENOTTY. By returning -ENOTTY directly, we
return the same error code immediately, but save ourselves the fallback
attempt.
Motivation:
This simplifies the logic for these IOCTL commands and lets us reason about
the side effects of these IOCTLs more easily. It will be possible to
permit these IOCTLs under LSM IOCTL policies, without having to worry about
them getting dispatched to problematic device drivers (which sometimes do
work before looking at the IOCTL command number).
Link: https://lore.kernel.org/all/cnwpkeovzbumhprco7q2c2y6zxzmxfpwpwe3tyy6c3gg2szgqd@vfzjaw5v5imr/
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240405214040.101396-2-gnoack@google.com
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Christian Brauner <brauner@kernel.org>
NIX SQ mode and link backpressure configuration is required for
all platforms. But in current driver this code is wrongly placed
under specific platform check. This patch fixes the issue by
moving the code out of platform check.
Fixes: 5d9b976d44 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://lore.kernel.org/r/20240408063643.26288-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Dumazet says:
====================
tcp: fix ISN selection in TIMEWAIT -> SYN_RECV
TCP can transform a TIMEWAIT socket into a SYN_RECV one from
a SYN packet, and the ISN of the SYNACK packet is normally
generated using TIMEWAIT tw_snd_nxt.
This SYN packet also bypasses normal checks against listen queue
being full or not.
Unfortunately this has been broken almost one decade ago.
This series fixes the issue, in two patches.
First patch refactors code to add tcp_tw_isn as a parameter
to ->route_req(), to make the second patch smaller.
Second patch fixes the issue, by no longer using TCP_SKB_CB(skb)
to store the tcp_tw_isn.
Following packetdrill test passes after this series:
// Set up a server listening socket.
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// Establish connection
+0 < S 0:0(0) win 32792 <mss 1460,nop,nop,sackOK>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
+.01 < . 1:1(0) ack 1 win 32792
+0 accept(3, ..., ...) = 4
// We close(), send a FIN, and get an ACK and FIN, in order to get into TIME_WAIT.
+.01 close(4) = 0
+0 > F. 1:1(0) ack 1
+.01 < F. 1:1(0) ack 2 win 32792
+0 > . 2:2(0) ack 2
// SYN hitting a TIME_WAIT -> should use an ISN based on TIMEWAIT tw_snd_nxt
+.01 < S 1000:1000(0) win 65535 <mss 1460,nop,nop,sackOK>
+0 > S. 65539:65539(0) ack 1001 <mss 1460,nop,nop,sackOK>
====================
Link: https://lore.kernel.org/r/20240407093322.3172088-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
TCP can transform a TIMEWAIT socket into a SYN_RECV one from
a SYN packet, and the ISN of the SYNACK packet is normally
generated using TIMEWAIT tw_snd_nxt :
tcp_timewait_state_process()
...
u32 isn = tcptw->tw_snd_nxt + 65535 + 2;
if (isn == 0)
isn++;
TCP_SKB_CB(skb)->tcp_tw_isn = isn;
return TCP_TW_SYN;
This SYN packet also bypasses normal checks against listen queue
being full or not.
tcp_conn_request()
...
__u32 isn = TCP_SKB_CB(skb)->tcp_tw_isn;
...
/* TW buckets are converted to open requests without
* limitations, they conserve resources and peer is
* evidently real one.
*/
if ((syncookies == 2 || inet_csk_reqsk_queue_is_full(sk)) && !isn) {
want_cookie = tcp_syn_flood_action(sk, rsk_ops->slab_name);
if (!want_cookie)
goto drop;
}
This was using TCP_SKB_CB(skb)->tcp_tw_isn field in skb.
Unfortunately this field has been accidentally cleared
after the call to tcp_timewait_state_process() returning
TCP_TW_SYN.
Using a field in TCP_SKB_CB(skb) for a temporary state
is overkill.
Switch instead to a per-cpu variable.
As a bonus, we do not have to clear tcp_tw_isn in TCP receive
fast path.
It is temporarily set then cleared only in the TCP_TW_SYN dance.
Fixes: 4ad19de877 ("net: tcp6: fix double call of tcp_v6_fill_cb()")
Fixes: eeea10b83a ("tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tcp_v6_init_req() reads TCP_SKB_CB(skb)->tcp_tw_isn to find
out if the request socket is created by a SYN hitting a TIMEWAIT socket.
This has been buggy for a decade, lets directly pass the information
from tcp_conn_request().
This is a preparatory patch to make the following one easier to review.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The struct track for every object in a new slab is already set up by
new_slab(), so remove the duplicate initialization in
early_kmem_cache_node_alloc().
Co-developed-by: Hyunmin Lee <hyunminlr@gmail.com>
Signed-off-by: Hyunmin Lee <hyunminlr@gmail.com>
Co-developed-by: Jeungwoo Yoo <casionwoo@gmail.com>
Signed-off-by: Jeungwoo Yoo <casionwoo@gmail.com>
Signed-off-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
As per the GICv4.1 spec (Arm IHI 0069H, 5.3.19):
"A VMAPP with {V, Alloc}=={0, x} is self-synchronizing, This means the ITS
command queue does not show the command as consumed until all of its
effects are completed."
Furthermore, VSYNC is allowed to deliver an SError when referencing a
non existent VPE.
By these definitions, a VMAPP followed by a VSYNC is a bug, as the
later references a VPE that has been unmapped by the former.
Fix it by eliding the VSYNC in this scenario.
Fixes: 64edfaa9a2 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP")
Signed-off-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20240406022737.3898763-1-tangnianyao@huawei.com
An interrupt's effective affinity can only be different from its configured
affinity if there are multiple CPUs. Make it clear that this option is only
meaningful when SMP is enabled. Otherwise, there exists "WARNING: unmet
direct dependencies detected for GENERIC_IRQ_EFFECTIVE_AFF_MASK" when make
menuconfig if CONFIG_SMP is not set on LoongArch.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240326121130.16622-3-yangtiezhu@loongson.cn
According to the code comment of "struct irq_chip", the member
"irq_set_affinity" is to set the CPU affinity on SMP machines, so define
and call eiointc_set_irq_affinity() only under CONFIG_SMP.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240326121130.16622-4-yangtiezhu@loongson.cn
When pch_msi_parent_domain_alloc() returns an error, there is an off-by-one
in the number of interrupts to be freed.
Fix it by passing the number of successfully allocated interrupts, instead of the
relative index of the last allocated one.
Fixes: 632dcc2c75 ("irqchip: Add Loongson PCH MSI controller")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://lore.kernel.org/r/20240327142334.1098-1-yuzenghui@huawei.com
When alpine_msix_gic_domain_alloc() fails, there is an off-by-one in the
number of interrupts to be freed.
Fix it by passing the number of successfully allocated interrupts, instead
of the relative index of the last allocated one.
Fixes: 3841245e84 ("irqchip/alpine-msi: Fix freeing of interrupts on allocation error path")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240327142305.1048-1-yuzenghui@huawei.com
Instead of checking for specific file_operations, add a bit to
file_operations which denotes a file that only contain hugetlb pages.
This lets us make hugetlbfs_file_operations static, and removes
is_file_shm_hugepages() completely.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240407201122.3783877-1-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
There is some care taken to ensure these destination buffers are
NUL-terminated by bounding the strncpy()'s by ORANGEFS_NAME_MAX - 1 or
ORANGEFS_MAX_SERVER_ADDR_LEN - 1. Instead, we can use the new 2-argument
version of strscpy() to guarantee NUL-termination on the destination
buffers while simplifying the code.
Based on usage with printf-likes, we can see these buffers are expected
to be NUL-terminated:
| gossip_debug(GOSSIP_NAME_DEBUG,
| "%s: doing lookup on %s under %pU,%d\n",
| __func__,
| new_op->upcall.req.lookup.d_name,
| &new_op->upcall.req.lookup.parent_refn.khandle,
| new_op->upcall.req.lookup.parent_refn.fs_id);
...
| gossip_debug(GOSSIP_SUPER_DEBUG,
| "Attempting ORANGEFS Remount via host %s\n",
| new_op->upcall.req.fs_mount.orangefs_config_server);
NUL-padding isn't required for any of these destination buffers as
they've all been zero-allocated with op_alloc() or kzalloc().
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240322-strncpy-fs-orangefs-dcache-c-v1-1-15d12debbf38@google.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
clang-14 points out that v_size is always smaller than a 64KB
page size if that is configured by the CPU architecture:
fs/nilfs2/ioctl.c:63:19: error: result of comparison of constant 65536 with expression of type '__u16' (aka 'unsigned short') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (argv->v_size > PAGE_SIZE)
~~~~~~~~~~~~ ^ ~~~~~~~~~
This is ok, so just shut up that warning with a cast.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240328143051.1069575-7-arnd@kernel.org
Fixes: 3358b4aaa8 ("nilfs2: fix problems of memory allocation in ioctl")
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Prefer common check_add_overflow() from overflow.h over the locally
rolled versions of it. While check_add_overflow() does require a
variable to assign to, unlike add_overflows_t(), it's still better than
having multiple versions around.
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405202625.2525671-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Daniel Machon says:
====================
Add support for flower actions mirred and redirect
This series adds support for the two tc flower actions mirred and
redirect. Both actions are implemented by means of a port mask and a
mask mode. The mask mode controls how the mask is applied, and together
they are used by the switch to make a forwarding decision. Both actions
are configurable via the IS0 or IS2 VCAP's (ingress stage 0 and 2,
respectively).
Patch #1: adds support for tc flower mirred action.
Patch #2: adds support for tc flower redirect action.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
====================
Link: https://lore.kernel.org/r/20240405-mirror-redirect-actions-v2-0-875d4c1927c8@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for the flower redirect action. Two VCAP actions are encoded
in the rule - one for the port mask, and one for the port mask mode.
When the rule is hit, the port mask is used as the final destination
set, replacing all other port masks.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for tc flower mirred action. Two VCAP actions are encoded in
the rule - one for the port mask, and one for the port mask mode. When
the rule is hit, the destination mask is OR'ed with the port mask.
Also add new VCAP function for supporting 72-bit wide actions, and a tc
helper for setting the port forwarding mask.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The code in thunk_64.S and thunk_32.S are exactly the same except for
the comments. Merge them in to thunk.S.
And since thunk_32.S was originated from thunk_64.S, the new merged
thunk.S is actually renamed from thunk_64.S.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240407090558.3395-9-jiangshanlai@gmail.com
