Flag 'abi_match' along with several other local variables has no purpose
with v4 related members removed.
Cc: Curtis Malainey <cujomalainey@chromium.org>
Cc: Łukasz Majczak <lmajczak@google.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240403091629.647267-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are no users of soc-topology ABI v4 since kernel v5.4 so remove
all v4 -> v5 converters.
Cc: Curtis Malainey <cujomalainey@chromium.org>
Cc: Łukasz Majczak <lmajczak@google.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240403091629.647267-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only known users are Chromebook configurations. Starting from
kernel v5.4, all of them are making use of soc-topology ABI v5.
Cc: Curtis Malainey <cujomalainey@chromium.org>
Cc: Łukasz Majczak <lmajczak@google.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240403091629.647267-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
LLVM generates bpf_addr_space_cast instruction while translating
pointers between native (zero) address space and
__attribute__((address_space(N))). The addr_space=0 is reserved as
bpf_arena address space.
rY = addr_space_cast(rX, 0, 1) is processed by the verifier and
converted to normal 32-bit move: wX = wY
rY = addr_space_cast(rX, 1, 0) has to be converted by JIT.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240404114203.105970-3-puranjay12@gmail.com
Add support for [LDX | STX | ST], PROBE_MEM32, [B | H | W | DW]
instructions. They are similar to PROBE_MEM instructions with the
following differences:
- PROBE_MEM32 supports store.
- PROBE_MEM32 relies on the verifier to clear upper 32-bit of the
src/dst register
- PROBE_MEM32 adds 64-bit kern_vm_start address (which is stored in S7
in the prologue). Due to bpf_arena constructions such S7 + reg +
off16 access is guaranteed to be within arena virtual range, so no
address check at run-time.
- S11 is a free callee-saved register, so it is used to store kern_vm_start
- PROBE_MEM32 allows STX and ST. If they fault the store is a nop. When
LDX faults the destination register is zeroed.
To support these on riscv, we do tmp = S7 + src/dst reg and then use
tmp2 as the new src/dst register. This allows us to reuse most of the
code for normal [LDX | STX | ST].
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240404114203.105970-2-puranjay12@gmail.com
Merge series from Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>:
The imx8_*_clocks API requires keeping track of all of the clocks used
by the IMX SOF driver via an array. This is unnecessary and doesn't
scale well. As such, remove it altogether and replace it with
devm_clk_bulk_get_all() and friends.
Off-by-one errors happen because nr_snk_pdo and nr_src_pdo are
incorrectly added one. The index of the loop is equal to the number of
PDOs to be updated when leaving the loop and it doesn't need to be added
one.
When doing the power negotiation, TCPM relies on the "nr_snk_pdo" as
the size of the local sink PDO array to match the Source capabilities
of the partner port. If the off-by-one overflow occurs, a wrong RDO
might be sent and unexpected power transfer might happen such as over
voltage or over current (than expected).
"nr_src_pdo" is used to set the Rp level when the port is in Source
role. It is also the array size of the local Source capabilities when
filling up the buffer which will be sent as the Source PDOs (such as
in Power Negotiation). If the off-by-one overflow occurs, a wrong Rp
level might be set and wrong Source PDOs will be sent to the partner
port. This could potentially cause over current or port resets.
Fixes: cd099cde4e ("usb: typec: tcpm: Support multiple capabilities")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240404133517.2707955-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit a2ad63daa8 ("VFS: add FMODE_CAN_ODIRECT file flag") file
systems can just set the FMODE_CAN_ODIRECT flag at open time instead of
wiring up a dummy direct_IO method to indicate support for direct I/O.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <94f78492f55c3f421359fb6e0d8fab6e79ea17b2.1709215665.git.ritesh.list@gmail.com>
Now that the KPROBES, TRACING, BLK_DEV_IO_TRACE, and UPROBE_EVENTS
Kconfig options select the TASKS_TRACE_RCU option, the torture.sh tests
of enabling exactly one of the RCU Tasks flavors fail. This commit
therefore disables these options to allow this testing to succeed.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Commit e43de7f086 ("fsnotify: optimize the case of no marks of any type")
optimized the case where there are no fsnotify watchers on any of the
filesystem's objects.
It is quite common for a system to have a single local filesystem and
it is quite common for the system to have some inotify watches on some
config files or directories, so the optimization of no marks at all is
often not in effect.
Permission event watchers, which require high priority group are more
rare, so optimizing the case of no marks og high priority groups can
improve performance for more systems, especially for performance
sensitive io workloads.
Count per-sb watched objects by high priority groups and use that the
optimize out the call to __fsnotify_parent() and fsnotify() in fsnotify
permission hooks.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-11-amir73il@gmail.com>
And use meaningfull names for the constants.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-10-amir73il@gmail.com>
Move the s_fsnotify_connectors counter into the per-sb fsnotify state.
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-9-amir73il@gmail.com>
Define a container struct fsnotify_sb_info to hold per-sb state,
including the reference to sb marks connector.
Allocate the fsnotify_sb_info state before attaching connector to any
object on the sb and free it only when killing sb.
This state is going to be used for storing per priority watched objects
counters.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-8-amir73il@gmail.com>
We would like to count watched objects by priority group, so we will need
to update the watched object counter after adding/removing marks.
Create a helper fsnotify_update_sb_watchers() and call it after
attaching/detaching a mark, instead of fsnotify_{get,put}_sb_watchers()
only after attaching/detaching a connector.
Soon, we will use this helper to count watched objects by the highest
watching priority group.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-7-amir73il@gmail.com>
Instead of passing fsnotify_connp_t, pass the pointer to the marked
object.
Store the object pointer in the connector and move the definition of
fsnotify_connp_t to internal fsnotify subsystem API, so it is no longer
used by fsnotify backends.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-6-amir73il@gmail.com>
There are two similar checks for adding an ignore mark without
FAN_MARK_IGNORED_SURV_MODIFY, one for the old FAN_MARK_IGNORED flag
and one for the new FAN_MARK_IGNORE flag.
Merge the two checks into a single location.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-5-amir73il@gmail.com>
In preparation to passing an object pointer to fsnotify_find_mark(), add
a wrapper fsnotify_find_inode_mark() and use it where possible.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-4-amir73il@gmail.com>
In preparation to passing an object pointer to add/remove/find mark
helpers, create helpers to get sb and connp by object type.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-3-amir73il@gmail.com>
The tradition, extending back almost a full year, has been 2GB plus an
additional number of GBs equal to the number of CPUs divided by sixteen.
This tradition has served scftorture well, even the CONFIG_PREEMPT=y
version running KASAN within guest OSes having 40 CPUs. However, this
test recently started OOMing on larger systems, and this commit therefore
gives this test an additional GB of memory.
It is quite possible that further testing on larger systems will show
a need to decrease the divisor from 16 to (say) 8, but that is a change
to make once it has been demonstrated to be required.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Instead of counting the number of connectors in an sb, we would like
to count the number of watched objects per priority group.
As a start, create an accessor fsnotify_sb_watched_objects() to
s_fsnotify_connectors and rename the fsnotify_{get,put}_sb_connectors()
helpers to fsnotify_{get,put}_sb_watchers() to better describes the
counter.
Increment the counter at the end of fsnotify_attach_connector_to_object()
if connector was attached instead of decrementing it on race to connect.
This is fine, because fsnotify_delete_sb() cannot be running in parallel
to fsnotify_attach_connector_to_object() which requires a reference to
a filesystem object.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240317184154.1200192-2-amir73il@gmail.com>
Both the exynos and rockchip drivers ran into link failures after
a Kconfig cleanup:
aarch64-linux-ld: drivers/gpu/drm/exynos/exynos_dp.o: in function `exynos_dp_resume':
exynos_dp.c:(.text+0xc0): undefined reference to `analogix_dp_resume'
aarch64-linux-ld: drivers/gpu/drm/exynos/exynos_dp.o: in function `exynos_dp_suspend':
exynos_dp.c:(.text+0xf4): undefined reference to `analogix_dp_suspend'
x86_64-linux-ld: drivers/gpu/drm/rockchip/cdn-dp-core.o: in function `cdn_dp_connector_mode_valid':
cdn-dp-core.c:(.text+0x13a): undefined reference to `drm_dp_bw_code_to_link_rate'
x86_64-linux-ld: cdn-dp-core.c:(.text+0x148): undefined reference to `drm_dp_bw_code_to_link_rate'
x86_64-linux-ld: drivers/gpu/drm/rockchip/cdn-dp-core.o: in function `cdn_dp_check_link_status':
cdn-dp-core.c:(.text+0x1396): undefined reference to `drm_dp_channel_eq_ok'
In both cases, the problem is that ROCKCHIP_CDN_DP and DRM_EXYNOS_DP
are 'bool' symbols that depend on the the 'tristate' DRM_DISPLAY_HELPER
symbol, but end up not working when the SoC specific part is built-in
but the helper is in a loadable module.
Use the same trick that DRM_ROCKCHIP already uses for the EXTCON
dependency and disallow DP support when it would not work.
Fixes: 0323287de8 ("drm: Switch DRM_DISPLAY_DP_HELPER to depends on")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404124101.2988099-1-arnd@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Two failure patterns are seen randomly when running slub_kunit tests with
CONFIG_SLAB_FREELIST_RANDOM and CONFIG_SLAB_FREELIST_HARDENED enabled.
Pattern 1:
# test_clobber_zone: pass:1 fail:0 skip:0 total:1
ok 1 test_clobber_zone
# test_next_pointer: EXPECTATION FAILED at lib/slub_kunit.c:72
Expected 3 == slab_errors, but
slab_errors == 0 (0x0)
# test_next_pointer: EXPECTATION FAILED at lib/slub_kunit.c:84
Expected 2 == slab_errors, but
slab_errors == 0 (0x0)
# test_next_pointer: pass:0 fail:1 skip:0 total:1
not ok 2 test_next_pointer
In this case, test_next_pointer() overwrites p[s->offset], but the data
at p[s->offset] is already 0x12.
Pattern 2:
ok 1 test_clobber_zone
# test_next_pointer: EXPECTATION FAILED at lib/slub_kunit.c:72
Expected 3 == slab_errors, but
slab_errors == 2 (0x2)
# test_next_pointer: pass:0 fail:1 skip:0 total:1
not ok 2 test_next_pointer
In this case, p[s->offset] has a value other than 0x12, but one of the
expected failures is nevertheless missing.
Invert data instead of writing a fixed value to corrupt the cache data
structures to fix the problem.
Fixes: 1f9f78b1b3 ("mm/slub, kunit: add a KUnit test for SLUB debugging functionality")
Cc: Oliver Glitta <glittao@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
CC: Daniel Latypov <dlatypov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
In mtk_flow_entry_update_l2, the hwe->ib1 is read using READ_ONCE at the
beginning of the function, checked, and then re-read from hwe->ib1,
may void all guarantees of the checks. Reuse the value that was read by
READ_ONCE to ensure the consistency of the ib1 throughout the function.
Signed-off-by: linke li <lilinke99@qq.com>
Link: https://lore.kernel.org/r/tencent_C699E9540505523424F11A9BD3D21B86840A@qq.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A recent rework changed the constant format strings to a local variable,
which causes warnings from clang when -Wformat-security is enabled:
drivers/firmware/arm_scmi/driver.c: In function 'scmi_probe':
drivers/firmware/arm_scmi/driver.c:2936:25: error: format not a string literal and no format arguments [-Werror=format-security]
2936 | dev_err(dev, err_str);
| ^~~~~~~
drivers/firmware/arm_scmi/driver.c:2993:9: error: format not a string literal and no format arguments [-Werror=format-security]
2993 | return dev_err_probe(dev, ret, err_str);
Print these using an explicit "%s" string instead.
Fixes: 3a7d93d1f7 ("firmware: arm_scmi: Use dev_err_probe to bail out")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403111040.3924658-1-arnd@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Jan Schunk reports that his small NFS servers suffer from memory
exhaustion after just a few days. A bisect shows that commit
e18e157bb5 ("SUNRPC: Send RPC message on TCP with a single
sock_sendmsg() call") is the first bad commit.
That commit assumed that sock_sendmsg() releases all the pages in
the underlying bio_vec array, but the reality is that it doesn't.
svc_xprt_release() releases the rqst's response pages, but the
record marker page fragment isn't one of those, so it is never
released.
This is a narrow fix that can be applied to stable kernels. A
more extensive fix is in the works.
Reported-by: Jan Schunk <scpcom@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218671
Fixes: e18e157bb5 ("SUNRPC: Send RPC message on TCP with a single sock_sendmsg() call")
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Preempt fences can sleep waiting for an exec queue suspend operation to
complete. If the system_unbound_wq is used for waiting and the number of
waiters exceeds max_active this will result in other users of the
system_unbound_wq getting starved. Use a device private work queue for
preempt fences to avoid starvation of the system_unbound_wq.
Even though suspend operations can complete out-of-order, all suspend
operations within a VM need to complete before the preempt rebind worker
can start. With that, use a device private ordered wq for preempt fence
waiting.
v2:
- Add comment about cleanup on failure (Matt R)
- Update commit message (Lucas)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401221913.139672-2-matthew.brost@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 37c15c4aae)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Rebinding might allocate page-table bos, causing evictions.
To support blocking locking during these evictions,
perform the rebinding in the drm_exec locking loop.
Also Reserve fence slots where actually needed rather than trying to
predict how many fence slots will be needed over a complete
wound-wait transaction.
v2:
- Remove a leftover call to xe_vm_rebind() (Matt Brost)
- Add a helper function xe_vm_validate_rebind() (Matt Brost)
v3:
- Add comments and squash with previous patch (Matt Brost)
Fixes: 24f947d58f ("drm/xe: Use DRM GPUVM helpers for external- and evicted objects")
Fixes: 29f424eb87 ("drm/xe/exec: move fence reservation")
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327091136.3271-5-thomas.hellstrom@linux.intel.com
(cherry picked from commit 7ee7dd6f30)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
They can actually complete out-of-order, so allocate a unique
fence context for each fence.
Fixes: 5387e865d9 ("drm/xe: Add TLB invalidation fence after rebinds issued from execs")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327091136.3271-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit 0453f17575)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Instead of handling the vm's rebind fence separately,
which is error prone if they are not strictly ordered,
attach rebind fences as kernel fences to the vm's resv.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327091136.3271-3-thomas.hellstrom@linux.intel.com
(cherry picked from commit 5a091aff50)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
For each rebind we insert a GuC TLB invalidation and add a
corresponding unordered TLB invalidation fence. This might
add a huge number of TLB invalidation fences to wait for so
rather than doing that, defer the TLB invalidation to the
next ring ops for each affected exec queue. Since the TLB
is invalidated on exec_queue switch, we need to invalidate
once for each affected exec_queue.
v2:
- Simplify if-statements around the tlb_flush_seqno.
(Matthew Brost)
- Add some comments and asserts.
Fixes: 5387e865d9 ("drm/xe: Add TLB invalidation fence after rebinds issued from execs")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240327091136.3271-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit 4fc4899e86)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
if the new dbuf slices are a superset of the old
dbuf slices then we don't have to do anything in
intel_dbuf_post_plane_update(). Restructure the code
to skip such redundant dbuf slice updates. The main
benefit is slightly less confusing logs.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-15-ville.syrjala@linux.intel.com
Currently we can't change MBUS join status without doing a modeset,
because we are lacking mechanism to synchronize those with vblank.
However then this means that we can't do a fastset, if there is a need
to change MBUS join state. Fix that by implementing such change.
We already call correspondent check and update at pre_plane dbuf update,
so the only thing left is to have a non-modeset version of that.
If active pipes stay the same then fastset is possible and only MBUS
join state/ddb allocation updates would be committed.
The full mbus/cdclk sequence will look as follows:
1. disable pipes
2. increase cdclk if necessary
2.1 reprogram cdclk
2.2 update dbuf tracker value
3. enable mbus joining if necessary
3.1 update mbus_ctl
3.2 update dbuf tracker value
4. reallocate dbuf for planes on active pipes
5. disable mbus joining if necessary
5.1 update dbuf tracker value
5.2 update mbus_ctl
6. enable pipes
7. decrease cdclk if necessary
7.1 update dbuf tracker value
7.2 reprogram cdclk
And in order to keep things in sync we need:
Step 2:
- mbus_join == old
- mdclk/cdclk ratio == new
Step 3:
- mbus_join == new
- mdclk/cdclk ratio == old when cdclk is changing in step 7
- mdclk/cdclk ratio == new when cdclk is changing in step 2
Step 5:
- mbus_join == new
- mdclk/cdclk ratio == old when cdclk is changing in step 7
- mdclk/cdclk ratio == new when cdclk is changing in step 2
Step 7:
- mbus_join == new
- mdclk/cdclk ratio == new
v2: - Removed redundant parentheses(Ville Syrjälä)
- Constified new_crtc_state in intel_mbus_joined_pipe(Ville Syrjälä)
- Removed pipe_select variable(Ville Syrjälä)
[v3: vsyrjala: Correctly sequence vs. cdclk updates,
properly describe the full sequence,
shuffle code around to make the diff more legible,
streamline a few things]
[v4: vsyrjala: Move the intel_cdclk_is_decreasing_later() stuff
to a separate patch]
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v3
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Co-developed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-13-ville.syrjala@linux.intel.com
The current cdclk/mbus programming sequence is as follows:
1. intel_set_cdclk_pre_plane_update()
2. update_mbus_pre_enable()
3. intel_set_cdclk_post_plane_update()
when the actual mdclk/cdclk programming is postponed to
intel_set_cdclk_post_plane_update() we must keep using
the old mdclk/cdclk ratio during update_mbus_pre_enable().
This guarantees the programmed ratio matches the rest of
the hardware state (mdlk/cdclk/mbus joining).
v2: Extracted from the vblank synchronized mbus programming patch
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-12-ville.syrjala@linux.intel.com
In order to make sure we are not breaking the proper sequence
let's do updates step by step and don't change MBUS join value
during MDCLK/CDCLK programming stage.
MBUS join programming would be taken care by pre/post ddb hooks.
v2: - Reworded comment about using old mbus_join value in
intel_set_cdclk(Ville Syrjälä)
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
[v3: vsyrjala: rebase on top of cdclk changes, reword a bit more]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-11-ville.syrjala@linux.intel.com
Add some debugs so that we can actually observe what is
actually happening during the mbus/dbuf programming steps.
We can just shove them into fairly low level functions as
none of them are called during any critical sections/etc.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-10-ville.syrjala@linux.intel.com
Extract the stuff that writes the dbuf/mbus ratio stuff
into its own function. Will help with correctly sequencing
the operations done during mbus programming.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-9-ville.syrjala@linux.intel.com
Extact the stuff that writes the joining bits in MBUS_CTL
into its own function. Will help with correctly sequencing
the operations done during mbus programming.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-8-ville.syrjala@linux.intel.com
intel_mbus_dbox_update() will become static soon. Relocate it
into a place that avoids having to add a forward declaration
for it.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-7-ville.syrjala@linux.intel.com
