mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
1,280,080 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Harald Freudenberger
|
830999bd7e |
s390/cpacf: Split and rework cpacf query functions
Rework the cpacf query functions to use the correct RRE
or RRF instruction formats and set register fields within
instructions correctly.
Fixes:
|
||
Arunpravin Paneer Selvam
|
431c590c3a |
drm/tests: Add a unit test for range bias allocation
Allocate cleared blocks in the bias range when the DRM buddy's clear avail is zero. This will validate the bias range allocation in scenarios like system boot when no cleared blocks are available and exercise the fallback path too. The resulting blocks should always be dirty. v1:(Matthew) - move the size to the variable declaration section. - move the mm.clear_avail init to allocator init. Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240514145636.16253-2-Arunpravin.PaneerSelvam@amd.com |
||
|
Arunpravin Paneer Selvam
|
bb21700baf |
drm/buddy: Fix the range bias clear memory allocation issue
Problem statement: During the system boot time, an application request
for the bulk volume of cleared range bias memory when the clear_avail
is zero, we dont fallback into normal allocation method as we had an
unnecessary clear_avail check which prevents the fallback method leads
to fb allocation failure following system goes into unresponsive state.
Solution: Remove the unnecessary clear_avail check in the range bias
allocation function.
v2: add a kunit for this corner case (Daniel Vetter)
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Fixes:
|
||
Waiman Long
|
9d230c0996 |
blk-cgroup: Properly propagate the iostat update up the hierarchy
During a cgroup_rstat_flush() call, the lowest level of nodes are flushed first before their parents. Since commit |
||
Ming Lei
|
d0aac23635 |
blk-cgroup: fix list corruption from reorder of WRITE ->lqueued
__blkcg_rstat_flush() can be run anytime, especially when blk_cgroup_bio_start
is being executed.
If WRITE of `->lqueued` is re-ordered with READ of 'bisc->lnode.next' in
the loop of __blkcg_rstat_flush(), `next_bisc` can be assigned with one
stat instance being added in blk_cgroup_bio_start(), then the local
list in __blkcg_rstat_flush() could be corrupted.
Fix the issue by adding one barrier.
Cc: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Fixes:
|
||
|
Ming Lei
|
6da6680632 |
blk-cgroup: fix list corruption from resetting io stat
Since commit |
||
Len Brown
|
256d218ec6 |
tools/power turbostat: version 2024.05.10
New since 2024.04.08:
Len Brown (6):
tools/power turbostat: Add "snapshot:" Makefile target
tools/power turbostat: Harden probe_intel_uncore_frequency()
tools/power turbostat: Remember global max_die_id
tools/power turbostat: Survive sparse die_id
tools/power turbostat: Add columns for clustered uncore frequency
tools/power turbostat: version 2024.05.10
Patryk Wlazlyn (7):
tools/power turbostat: Replace _Static_assert with BUILD_BUG_ON
tools/power turbostat: Enable non-privileged users to read sysfs counters
tools/power turbostat: Avoid possible memory corruption due to sparse topology IDs
tools/power turbostat: Read Core-cstates via perf
tools/power turbostat: Read Package-cstates via perf
tools/power turbostat: Fix order of strings in pkg_cstate_limit_strings
tools/power turbostat: Ignore pkg_cstate_limit when it is not available
Zhang Rui (2):
tools/power turbostat: Enhance ARL/LNL support
tools/power turbostat: Add ARL-H support
Signed-off-by: Len Brown <len.brown@intel.com>
|
||
Patryk Wlazlyn
|
29fea61cd8 |
tools/power turbostat: Ignore pkg_cstate_limit when it is not available
When running in no-msr mode, the pkg_cstate_limit is not populated, thus we use perf to determine if given pcstate counter is present on the platform. Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Patryk Wlazlyn
|
4e7ee02300 |
tools/power turbostat: Fix order of strings in pkg_cstate_limit_strings
Change the order so that it matches the indexes defined in: Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Patryk Wlazlyn
|
0451adf4d4 |
tools/power turbostat: Read Package-cstates via perf
Reading the counters via perf can be done in bulk with a single syscall, making the counter values more accurate with respect to one another by minimizing the time gap between individual counter reads. Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Patryk Wlazlyn
|
1f9e46da9c |
tools/power turbostat: Read Core-cstates via perf
Reading the counters via perf can be done in bulk with a single syscall, making the counter values more accurate with respect to one another by minimizing the time gap between individual counter reads. Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Patryk Wlazlyn
|
3559ea813a |
tools/power turbostat: Avoid possible memory corruption due to sparse topology IDs
Save the highest core and package id when parsing topology to allocate enough memory when get_rapl_counters() is called with a core or a package id as a domain. Note that RAPL domains are per-package on Intel, but per-core on AMD. Thus, the RAPL code effectively runs in different modes on those two product lines. Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Len Brown
|
78464d7681 |
tools/power turbostat: Add columns for clustered uncore frequency
New machines have multiple uncore frequencies per package, visible in /sys/devices/system/cpu/intel_uncore_frequency/uncore##/ turbostat now samples these frequencies each measurement interval. For each package, turbostat now prints "UMHzX.Y" columns, where X = domain_id, and Y = fabric_cluster_id. The system summary for each UMHzX.Y column is the average value for across all of the packages in the system. Signed-off-by: Len Brown <len.brown@intel.com> |
||
Linus Torvalds
|
3c999d1ae3 |
workqueue: Changes for v6.10
- Work items can now be disabled and enabled, and cancel_work_sync() and disable_work() can be called form atomic contexts for BH work items. This closes feature gap with tasklet and should allow converting all existing tasklet users to BH workqueues. - Improve pool sharing for unbound workqueues with strict affinity. - Misc changes including doc updates, improved debug annotations and cleanups. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZkU2FA4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGaNaAQDgO5Za4NH3EKVD8BIHpG7N3BpcVNGh/as9E2vh sgJMhwEA7YY4LOUkGkCWYdT+fj7Od/xyqHVH1DVozL2blfsF1gY= =ZEuW -----END PGP SIGNATURE----- Merge tag 'wq-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue updates from Tejun Heo: - Work items can now be disabled and enabled, and cancel_work_sync() and disable_work() can be called form atomic contexts for BH work items. This closes feature gap with tasklet and should allow converting all existing tasklet users to BH workqueues. - Improve pool sharing for unbound workqueues with strict affinity. - Misc changes including doc updates, improved debug annotations and cleanups. * tag 'wq-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Use "@..." in function comment to describe variable length argument workqueue: Add destroy_work_on_stack() in workqueue_softirq_dead() workqueue: remove unnecessary import and function in wq_monitor.py workqueue: Introduce enable_and_queue_work() convenience function workqueue: add function in event of workqueue_activate_work workqueue: Cleanup subsys attribute registration workqueue: Use list_last_entry() to get the last idle worker workqueue: Move attrs->cpumask out of worker_pool's properties when attrs->affn_strict workqueue: Use INIT_WORK_ONSTACK in workqueue_softirq_dead() workqueue: Allow cancel_work_sync() and disable_work() from atomic contexts on BH work items workqueue: Remember whether a work item was on a BH workqueue workqueue: Remove WORK_OFFQ_CANCELING workqueue: Implement disable/enable for (delayed) work items workqueue: Preserve OFFQ bits in cancel[_sync] paths |
||
|
Linus Torvalds
|
de6fef50ea |
cgroup: Changes for v6.10
- The locking around cpuset hotplug processing has always been a bit of mess
which was worked around by making hotplug processing asynchronous. The
asynchronity isn't great and led to other issues. We tried to make the
behavior synchronous a while ago but that led to lockdep splats. Waiman
took another stab at cleaning up and making it synchronous. The patch has
been in -next for well over a month and there haven't been any complaints,
so fingers crossed.
- Tracepoints added to help understanding rstat lock contentions.
- A bunch of minor changes - doc updates, code cleanups and selftests.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZkUrFA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGfTyAQCwd0aNQOqaKRhJGtWYShqV/aYzurCy1Z2tB9/3
dkdy9gD7BHNk6kZQEbT97RrHPIduFansLtc76VziACibWBuomgg=
=2DNQ
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- The locking around cpuset hotplug processing has always been a bit of
mess which was worked around by making hotplug processing
asynchronous. The asynchronity isn't great and led to other issues.
We tried to make the behavior synchronous a while ago but that led to
lockdep splats. Waiman took another stab at cleaning up and making it
synchronous. The patch has been in -next for well over a month and
there haven't been any complaints, so fingers crossed.
- Tracepoints added to help understanding rstat lock contentions.
- A bunch of minor changes - doc updates, code cleanups and selftests.
* tag 'cgroup-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits)
cgroup/rstat: add cgroup_rstat_cpu_lock helpers and tracepoints
selftests/cgroup: Drop define _GNU_SOURCE
docs: cgroup-v1: Update page cache removal functions
selftests/cgroup: fix uninitialized variables in test_zswap.c
selftests/cgroup: cpu_hogger init: use {} instead of {NULL}
selftests/cgroup: fix clang warnings: uninitialized fd variable
selftests/cgroup: fix clang build failures for abs() calls
cgroup/cpuset: Remove outdated comment in sched_partition_write()
cgroup/cpuset: Fix incorrect top_cpuset flags
cgroup/cpuset: Avoid clearing CS_SCHED_LOAD_BALANCE twice
cgroup/cpuset: Statically initialize more members of top_cpuset
cgroup: Avoid unnecessary looping in cgroup_no_v1()
cgroup, legacy_freezer: update comment for freezer_css_offline()
docs, cgroup: add entries for pids to cgroup-v2.rst
cgroup: don't call cgroup1_pidlist_destroy_all() for v2
cgroup_freezer: update comment for freezer_css_online()
cgroup/rstat: desc member cgrp in cgroup_rstat_flush_release
cgroup/rstat: add cgroup_rstat_lock helpers and tracepoints
cgroup/pids: Remove superfluous zeroing
docs: cgroup-v1: Fix description for css_online
...
|
||
Stephen Brennan
|
1a7d0890dd |
kprobe/ftrace: bail out if ftrace was killed
If an error happens in ftrace, ftrace_kill() will prevent disarming kprobes. Eventually, the ftrace_ops associated with the kprobes will be freed, yet the kprobes will still be active, and when triggered, they will use the freed memory, likely resulting in a page fault and panic. This behavior can be reproduced quite easily, by creating a kprobe and then triggering a ftrace_kill(). For simplicity, we can simulate an ftrace error with a kernel module like [1]: [1]: https://github.com/brenns10/kernel_stuff/tree/master/ftrace_killer sudo perf probe --add commit_creds sudo perf trace -e probe:commit_creds # In another terminal make sudo insmod ftrace_killer.ko # calls ftrace_kill(), simulating bug # Back to perf terminal # ctrl-c sudo perf probe --del commit_creds After a short period, a page fault and panic would occur as the kprobe continues to execute and uses the freed ftrace_ops. While ftrace_kill() is supposed to be used only in extreme circumstances, it is invoked in FTRACE_WARN_ON() and so there are many places where an unexpected bug could be triggered, yet the system may continue operating, possibly without the administrator noticing. If ftrace_kill() does not panic the system, then we should do everything we can to continue operating, rather than leave a ticking time bomb. Link: https://lore.kernel.org/all/20240501162956.229427-1-stephen.s.brennan@oracle.com/ Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Guo Ren <guoren@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
Steve French
|
a395726cf8 |
cifs: fix data corruption in read after invalidate
When invalidating a file as part of breaking a lease, the folios holding
the file data are disposed of, and truncate calls ->invalidate_folio()
to get rid of them rather than calling ->release_folio(). This means
that the netfs_inode::zero_point value didn't get updated in current
upstream code to reflect the point after which we can assume that the
server will only return zeroes, and future reads will then return blocks
of zeroes if the file got extended for any region beyond the old zero
point.
Fix this by updating zero_point before invalidating the inode in
cifs_revalidate_mapping().
Suggested-by: David Howells <dhowells@redhat.com>
Fixes:
|
||
Bjorn Helgaas
|
8a1940bca9 |
Revert "genirq/msi: Provide constants for PCI/IMS support"
This reverts commit
|
||
|
Bjorn Helgaas
|
850aae933c |
Revert "x86/apic/msi: Enable PCI/IMS"
This reverts commit
|
||
|
Bjorn Helgaas
|
79f99aac79 |
Revert "iommu/vt-d: Enable PCI/IMS"
This reverts commit
|
||
|
Bjorn Helgaas
|
72860ff3bb |
Revert "iommu/amd: Enable PCI/IMS"
This reverts commit
|
||
|
Bjorn Helgaas
|
b966b11028 |
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
This reverts commit |
||
|
Bjorn Helgaas
|
1794808fb1 |
Revert "PCI/MSI: Provide pci_ims_alloc/free_irq()"
This reverts commit |
||
|
Bjorn Helgaas
|
372c669271 |
Revert "PCI/MSI: Provide stubs for IMS functions"
This reverts commit |
||
|
Linus Torvalds
|
f4b0c4b508 |
ARM:
* Move a lot of state that was previously stored on a per vcpu
basis into a per-CPU area, because it is only pertinent to the
host while the vcpu is loaded. This results in better state
tracking, and a smaller vcpu structure.
* Add full handling of the ERET/ERETAA/ERETAB instructions in
nested virtualisation. The last two instructions also require
emulating part of the pointer authentication extension.
As a result, the trap handling of pointer authentication has
been greatly simplified.
* Turn the global (and not very scalable) LPI translation cache
into a per-ITS, scalable cache, making non directly injected
LPIs much cheaper to make visible to the vcpu.
* A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
* Allocate PPIs and SGIs outside of the vcpu structure, allowing
for smaller EL2 mapping and some flexibility in implementing
more or less than 32 private IRQs.
* Purge stale mpidr_data if a vcpu is created after the MPIDR
map has been created.
* Preserve vcpu-specific ID registers across a vcpu reset.
* Various minor cleanups and improvements.
LoongArch:
* Add ParaVirt IPI support.
* Add software breakpoint support.
* Add mmio trace events support.
RISC-V:
* Support guest breakpoints using ebreak
* Introduce per-VCPU mp_state_lock and reset_cntx_lock
* Virtualize SBI PMU snapshot and counter overflow interrupts
* New selftests for SBI PMU and Guest ebreak
* Some preparatory work for both TDX and SNP page fault handling.
This also cleans up the page fault path, so that the priorities
of various kinds of fauls (private page, no memory, write
to read-only slot, etc.) are easier to follow.
x86:
* Minimize amount of time that shadow PTEs remain in the special
REMOVED_SPTE state. This is a state where the mmu_lock is held for
reading but concurrent accesses to the PTE have to spin; shortening
its use allows other vCPUs to repopulate the zapped region while
the zapper finishes tearing down the old, defunct page tables.
* Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID field,
which is defined by hardware but left for software use. This lets KVM
communicate its inability to map GPAs that set bits 51:48 on hosts
without 5-level nested page tables. Guest firmware is expected to
use the information when mapping BARs; this avoids that they end up at
a legal, but unmappable, GPA.
* Fixed a bug where KVM would not reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
* As usual, a bunch of code cleanups.
x86 (AMD):
* Implement a new and improved API to initialize SEV and SEV-ES VMs, which
will also be extendable to SEV-SNP. The new API specifies the desired
encryption in KVM_CREATE_VM and then separately initializes the VM.
The new API also allows customizing the desired set of VMSA features;
the features affect the measurement of the VM's initial state, and
therefore enabling them cannot be done tout court by the hypervisor.
While at it, the new API includes two bugfixes that couldn't be
applied to the old one without a flag day in userspace or without
affecting the initial measurement. When a SEV-ES VM is created with
the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are
rejected once the VMSA has been encrypted. Also, the FPU and AVX
state will be synchronized and encrypted too.
* Support for GHCB version 2 as applicable to SEV-ES guests. This, once
more, is only accessible when using the new KVM_SEV_INIT2 flow for
initialization of SEV-ES VMs.
x86 (Intel):
* An initial bunch of prerequisite patches for Intel TDX were merged.
They generally don't do anything interesting. The only somewhat user
visible change is a new debugging mode that checks that KVM's MMU
never triggers a #VE virtualization exception in the guest.
* Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig VM-Exit to
L1, as per the SDM.
Generic:
* Use vfree() instead of kvfree() for allocations that always use vcalloc()
or __vcalloc().
* Remove .change_pte() MMU notifier - the changes to non-KVM code are
small and Andrew Morton asked that I also take those through the KVM
tree. The callback was only ever implemented by KVM (which was also the
original user of MMU notifiers) but it had been nonfunctional ever since
calls to set_pte_at_notify were wrapped with invalidate_range_start
and invalidate_range_end... in 2012.
Selftests:
* Enhance the demand paging test to allow for better reporting and stressing
of UFFD performance.
* Convert the steal time test to generate TAP-friendly output.
* Fix a flaky false positive in the xen_shinfo_test due to comparing elapsed
time across two different clock domains.
* Skip the MONITOR/MWAIT test if the host doesn't actually support MWAIT.
* Avoid unnecessary use of "sudo" in the NX hugepage test wrapper shell
script, to play nice with running in a minimal userspace environment.
* Allow skipping the RSEQ test's sanity check that the vCPU was able to
complete a reasonable number of KVM_RUNs, as the assert can fail on a
completely valid setup. If the test is run on a large-ish system that is
otherwise idle, and the test isn't affined to a low-ish number of CPUs, the
vCPU task can be repeatedly migrated to CPUs that are in deep sleep states,
which results in the vCPU having very little net runtime before the next
migration due to high wakeup latencies.
* Define _GNU_SOURCE for all selftests to fix a warning that was introduced by
a change to kselftest_harness.h late in the 6.9 cycle, and because forcing
every test to #define _GNU_SOURCE is painful.
* Provide a global pseudo-RNG instance for all tests, so that library code can
generate random, but determinstic numbers.
* Use the global pRNG to randomly force emulation of select writes from guest
code on x86, e.g. to help validate KVM's emulation of locked accesses.
* Allocate and initialize x86's GDT, IDT, TSS, segments, and default exception
handlers at VM creation, instead of forcing tests to manually trigger the
related setup.
Documentation:
* Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZE878UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOukQf+LcvZsWtrC7Wd5K9SQbYXaS4Rk6P6
JHoQW2d0hUN893J2WibEw+l1J/0vn5JumqHXyZgJ7CbaMtXkWWQTwDSDLuURUKpv
XNB3Sb17G87NH+s1tOh0tA9h5upbtlHVHvrtIwdbb9+XHgQ6HTL4uk+HdfO/p9fW
cWBEZAKoWcCIa99Numv3pmq5vdrvBlNggwBugBS8TH69EKMw+V1Vu1SFkIdNDTQk
NJJ28cohoP3wnwlIHaXSmU4RujipPH3Lm/xupyA5MwmzO713eq2yUqV49jzhD5/I
MA4Ruvgrdm4wpp89N9lQMyci91u6q7R9iZfMu0tSg2qYI3UPKIdstd8sOA==
=2lED
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Move a lot of state that was previously stored on a per vcpu basis
into a per-CPU area, because it is only pertinent to the host while
the vcpu is loaded. This results in better state tracking, and a
smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in nested
virtualisation. The last two instructions also require emulating
part of the pointer authentication extension. As a result, the trap
handling of pointer authentication has been greatly simplified.
- Turn the global (and not very scalable) LPI translation cache into
a per-ITS, scalable cache, making non directly injected LPIs much
cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing for
smaller EL2 mapping and some flexibility in implementing more or
less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR map has
been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
LoongArch:
- Add ParaVirt IPI support
- Add software breakpoint support
- Add mmio trace events support
RISC-V:
- Support guest breakpoints using ebreak
- Introduce per-VCPU mp_state_lock and reset_cntx_lock
- Virtualize SBI PMU snapshot and counter overflow interrupts
- New selftests for SBI PMU and Guest ebreak
- Some preparatory work for both TDX and SNP page fault handling.
This also cleans up the page fault path, so that the priorities of
various kinds of fauls (private page, no memory, write to read-only
slot, etc.) are easier to follow.
x86:
- Minimize amount of time that shadow PTEs remain in the special
REMOVED_SPTE state.
This is a state where the mmu_lock is held for reading but
concurrent accesses to the PTE have to spin; shortening its use
allows other vCPUs to repopulate the zapped region while the zapper
finishes tearing down the old, defunct page tables.
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID
field, which is defined by hardware but left for software use.
This lets KVM communicate its inability to map GPAs that set bits
51:48 on hosts without 5-level nested page tables. Guest firmware
is expected to use the information when mapping BARs; this avoids
that they end up at a legal, but unmappable, GPA.
- Fixed a bug where KVM would not reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- As usual, a bunch of code cleanups.
x86 (AMD):
- Implement a new and improved API to initialize SEV and SEV-ES VMs,
which will also be extendable to SEV-SNP.
The new API specifies the desired encryption in KVM_CREATE_VM and
then separately initializes the VM. The new API also allows
customizing the desired set of VMSA features; the features affect
the measurement of the VM's initial state, and therefore enabling
them cannot be done tout court by the hypervisor.
While at it, the new API includes two bugfixes that couldn't be
applied to the old one without a flag day in userspace or without
affecting the initial measurement. When a SEV-ES VM is created with
the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are rejected
once the VMSA has been encrypted. Also, the FPU and AVX state will
be synchronized and encrypted too.
- Support for GHCB version 2 as applicable to SEV-ES guests.
This, once more, is only accessible when using the new
KVM_SEV_INIT2 flow for initialization of SEV-ES VMs.
x86 (Intel):
- An initial bunch of prerequisite patches for Intel TDX were merged.
They generally don't do anything interesting. The only somewhat
user visible change is a new debugging mode that checks that KVM's
MMU never triggers a #VE virtualization exception in the guest.
- Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig
VM-Exit to L1, as per the SDM.
Generic:
- Use vfree() instead of kvfree() for allocations that always use
vcalloc() or __vcalloc().
- Remove .change_pte() MMU notifier - the changes to non-KVM code are
small and Andrew Morton asked that I also take those through the
KVM tree.
The callback was only ever implemented by KVM (which was also the
original user of MMU notifiers) but it had been nonfunctional ever
since calls to set_pte_at_notify were wrapped with
invalidate_range_start and invalidate_range_end... in 2012.
Selftests:
- Enhance the demand paging test to allow for better reporting and
stressing of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing
elapsed time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support
MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test wrapper
shell script, to play nice with running in a minimal userspace
environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able
to complete a reasonable number of KVM_RUNs, as the assert can fail
on a completely valid setup.
If the test is run on a large-ish system that is otherwise idle,
and the test isn't affined to a low-ish number of CPUs, the vCPU
task can be repeatedly migrated to CPUs that are in deep sleep
states, which results in the vCPU having very little net runtime
before the next migration due to high wakeup latencies.
- Define _GNU_SOURCE for all selftests to fix a warning that was
introduced by a change to kselftest_harness.h late in the 6.9
cycle, and because forcing every test to #define _GNU_SOURCE is
painful.
- Provide a global pseudo-RNG instance for all tests, so that library
code can generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes
from guest code on x86, e.g. to help validate KVM's emulation of
locked accesses.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default
exception handlers at VM creation, instead of forcing tests to
manually trigger the related setup.
Documentation:
- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (225 commits)
selftests/kvm: remove dead file
KVM: selftests: arm64: Test vCPU-scoped feature ID registers
KVM: selftests: arm64: Test that feature ID regs survive a reset
KVM: selftests: arm64: Store expected register value in set_id_regs
KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
KVM: arm64: Only reset vCPU-scoped feature ID regs once
KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
KVM: arm64: Rename is_id_reg() to imply VM scope
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: SEV: Allow per-guest configuration of GHCB protocol version
KVM: SEV: Add GHCB handling for termination requests
KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests
KVM: SEV: Add support to handle AP reset MSR protocol
KVM: x86: Explicitly zero kvm_caps during vendor module load
KVM: x86: Fully re-initialize supported_mce_cap on vendor module load
KVM: x86: Fully re-initialize supported_vm_types on vendor module load
KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns
KVM: x86/mmu: Initialize kvm_page_fault's pfn and hva to error values
...
|
||
Tejun Heo
|
a2a58909cf | Merge branch 'for-6.10' into test-merge-for-6.10 | ||
|
Linus Torvalds
|
2e9250022e |
CXL changes for v6.10 merge window
Topics:
- Add CXL log related mailbox commands
- Add Get Log Capabilities command
- Add Get Supported Log Sub-List Commands command
- Add Clear Log command
- Add series for HPA to DPA translation for CXL events cxl_dram and cxl_general_media
- Add support to send CPER records to CXL for more detailed parsing.
Misc changes and fixes:
- Fix for compile warning of cxl_security_ops
- Add debug message for invalid interleave granularity
- Enhancement to cxl-test event testing
- Add dev_warn() on unsupported mixed mode decoder
- Fix use of phys_to_target_node() for x86
- Use helper function for decoder enum instead of open coding
- Include missing headers for cxl-event
- Fix MAINTAINERS file entry
- Fix cxlr_pmem memory leak
- Cleanup __cxl_parse_cfmws via scope-based resource menagement
- Convert cxl_pmem_region_alloc() to scope-based resource management
-----BEGIN PGP SIGNATURE-----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=rCAo
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
- Three CXL mailbox passthrough commands are added to support the
populating and clearing of vendor debug logs:
- Get Log Capabilities
- Get Supported Log Sub-List Commands
- Clear Log
- Add support of Device Phyiscal Address (DPA) to Host Physical Address
(HPA) translation for CXL events of cxl_dram and cxl_general media.
This allows user space to figure out which CXL region the event
occured via trace event.
- Connect CXL to CPER reporting.
If a device is configured for firmware first, CXL event records are
not sent directly to the host. Those records are reported through EFI
Common Platform Error Records (CPER). Add support to route the CPER
records through the CXL sub-system in order to provide DPA to HPA
translation and also event decoding and tracing. This is useful for
users to determine which system issues may correspond to specific
hardware events.
- A number of misc cleanups and fixes:
- Fix for compile warning of cxl_security_ops
- Add debug message for invalid interleave granularity
- Enhancement to cxl-test event testing
- Add dev_warn() on unsupported mixed mode decoder
- Fix use of phys_to_target_node() for x86
- Use helper function for decoder enum instead of open coding
- Include missing headers for cxl-event
- Fix MAINTAINERS file entry
- Fix cxlr_pmem memory leak
- Cleanup __cxl_parse_cfmws via scope-based resource menagement
- Convert cxl_pmem_region_alloc() to scope-based resource management
* tag 'cxl-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
cxl/cper: Remove duplicated GUID defines
cxl/cper: Fix non-ACPI-APEI-GHES build
cxl/pci: Process CPER events
acpi/ghes: Process CXL Component Events
cxl/region: Convert cxl_pmem_region_alloc to scope-based resource management
cxl/acpi: Cleanup __cxl_parse_cfmws()
cxl/region: Fix cxlr_pmem leaks
cxl/core: Add region info to cxl_general_media and cxl_dram events
cxl/region: Move cxl_trace_hpa() work to the region driver
cxl/region: Move cxl_dpa_to_region() work to the region driver
cxl/trace: Correct DPA field masks for general_media & dram events
MAINTAINERS: repair file entry in COMPUTE EXPRESS LINK
cxl/cxl-event: include missing <linux/types.h> and <linux/uuid.h>
cxl/hdm: Debug, use decoder name function
cxl: Fix use of phys_to_target_node() for x86
cxl/hdm: dev_warn() on unsupported mixed mode decoder
cxl/test: Enhance event testing
cxl/hdm: Add debug message for invalid interleave granularity
cxl: Fix compile warning for cxl_security_ops extern
cxl/mbox: Add Clear Log mailbox command
...
|
||
|
Linus Torvalds
|
c405aa3ea3 |
Updates for nvdimm for 6.10
Code cleanups, remove duplicate code, and updates for current interfaces. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQSgX9xt+GwmrJEQ+euebuN7TNx1MQUCZkThOhQcaXJhLndlaW55 QGludGVsLmNvbQAKCRCebuN7TNx1MWUvAP9VuWLTc+bCguRMbArOsdE2T60780pR DT12KXfwm/FvKAD9Hyz8S2CkwvdlwC5hqH2AmdpzDhpJ1f9LBpcsb6GUKwk= =eZC/ -----END PGP SIGNATURE----- Merge tag 'libnvdimm-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull nvdimm updates from Ira Weiny: "The changes include removing duplicate code and updating the nvdimm tree to the current kernel interfaces such as using const for struct device_type and changing the platform remove callback signature" * tag 'libnvdimm-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: remove redundant assignment to variable rc ndtest: Convert to platform remove callback returning void nvdimm/btt: always set max_integrity_segments nvdimm: remove nd_integrity_init dax: constify the struct device_type usage powerpc/papr_scm: Move duplicate definitions to common header files |
||
Rick Wertenbroek
|
2dba285cab |
PCI: rockchip-ep: Remove wrong mask on subsys_vendor_id
Remove wrong mask on subsys_vendor_id. Both the Vendor ID and Subsystem
Vendor ID are u16 variables and are written to a u32 register of the
controller. The Subsystem Vendor ID was always 0 because the u16 value
was masked incorrectly with GENMASK(31,16) resulting in all lower 16
bits being set to 0 prior to the shift.
Remove both masks as they are unnecessary and set the register correctly
i.e., the lower 16-bits are the Vendor ID and the upper 16-bits are the
Subsystem Vendor ID.
This is documented in the RK3399 TRM section 17.6.7.1.17
[kwilczynski: removed unnecesary newline]
Fixes:
|
||
|
Linus Torvalds
|
a49468240e |
Modules changes for v6.10-rc1
Finally something fun. Mike Rapoport does some cleanup to allow us to
take out module_alloc() out of modules into a new paint shedded execmem_alloc()
and execmem_free() so to make emphasis these helpers are actually used outside
of modules. It starts with a no-functional changes API rename / placeholders
to then allow architectures to define their requirements into a new shiny
struct execmem_info with ranges, and requirements for those ranges. Archs
now can intitialize this execmem_info as the last part of mm_core_init() if
they have to diverge from the norm. Each range is a known type clearly
articulated and spelled out in enum execmem_type.
Although a lot of this is major cleanup and prep work for future enhancements an
immediate clear gain is we get to enable KPROBES without MODULES now. That is
ultimately what motiviated to pick this work up again, now with smaller goal as
concrete stepping stone.
This has been sitting on linux-next for a little less than a month, a few issues
were found already and fixed, in particular an odd mips boot issue. Arch folks
reviewed the code too. This is ready for wider exposure and testing.
-----BEGIN PGP SIGNATURE-----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=Nsg4
-----END PGP SIGNATURE-----
Merge tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Finally something fun. Mike Rapoport does some cleanup to allow us to
take out module_alloc() out of modules into a new paint shedded
execmem_alloc() and execmem_free() so to make emphasis these helpers
are actually used outside of modules.
It starts with a non-functional changes API rename / placeholders to
then allow architectures to define their requirements into a new shiny
struct execmem_info with ranges, and requirements for those ranges.
Archs now can intitialize this execmem_info as the last part of
mm_core_init() if they have to diverge from the norm. Each range is a
known type clearly articulated and spelled out in enum execmem_type.
Although a lot of this is major cleanup and prep work for future
enhancements an immediate clear gain is we get to enable KPROBES
without MODULES now. That is ultimately what motiviated to pick this
work up again, now with smaller goal as concrete stepping stone"
* tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of
kprobes: remove dependency on CONFIG_MODULES
powerpc: use CONFIG_EXECMEM instead of CONFIG_MODULES where appropriate
x86/ftrace: enable dynamic ftrace without CONFIG_MODULES
arch: make execmem setup available regardless of CONFIG_MODULES
powerpc: extend execmem_params for kprobes allocations
arm64: extend execmem_info for generated code allocations
riscv: extend execmem_params for generated code allocations
mm/execmem, arch: convert remaining overrides of module_alloc to execmem
mm/execmem, arch: convert simple overrides of module_alloc to execmem
mm: introduce execmem_alloc() and execmem_free()
module: make module_memory_{alloc,free} more self-contained
sparc: simplify module_alloc()
nios2: define virtual address space for modules
mips: module: rename MODULE_START to MODULES_VADDR
arm64: module: remove unneeded call to kasan_alloc_module_shadow()
kallsyms: replace deprecated strncpy with strscpy
module: allow UNUSED_KSYMS_WHITELIST to be relative against objtree.
|
||
Geert Uytterhoeven
|
eebadafc3b |
ARM: 9398/1: Fix userspace enter on LPAE with CC_OPTIMIZE_FOR_SIZE=y
Booting an LPAE-enabled kernel built with CONFIG_CC_OPTIMIZE_FOR_SIZE=y
fails when starting userspace:
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
CPU: 1 PID: 1 Comm: init Tainted: G W N 6.9.0-rc1-koelsch-00004-g7af5b901e847 #1930
Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x78/0xa8
dump_stack_lvl from panic+0x118/0x398
panic from do_exit+0x1ec/0x938
do_exit from sys_exit_group+0x0/0x10
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 ]---
Add the missing memory clobber to cpu_set_ttbcr(), as suggested by
Russell King.
Force inlining of uaccess_save_and_enable(), as suggested by Ard
Biesheuvel.
The latter fixes booting on Koelsch.
Closes: https://lore.kernel.org/r/CAMuHMdWTAJcZ9BReWNhpmsgkOzQxLNb5OhNYxzxv6D5TSh2fwQ@mail.gmail.com/
Fixes:
|
||
|
Linus Torvalds
|
8c06da67d0 |
Livepatching changes for 6.10
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmZEoUMACgkQUqAMR0iA lPIVLQ/+KpblzXPdOC32A5q8/l+stX3pacly2vm+2+Px9TDhH8cZzOuH1Z8422Xz MlILtDQACvqkTIPgKvgVQaaQmggFUeEruv86dHVXrPVTnuHXCz9xu2aljxZQFMd1 Q4ocF0ibWqb+PLKybyDyKEaLdhyDo7wa5I28pkGqCIWbVXMS6YVZ7Ji4QOzg3ahI q+CX9Dk8HqF+fmhVSJm3CbiQiFO3cgbFoO/WZpvpALZuBmzSuxcpGKgyPvi5Z0wh VsWEgL4Juo5YhiHI/G1rxhqGx5At0a0X1xpoYwyE4MegWmOJqG/HTNl6Y/Wn9TRf Tg5DByMTw+EvX2Z57eumC1yfitsuNjpnERL4rXBtgODBtSbC4va+Rd1pA/Y2ezfj estg76XietkmIYVuvJz8VAWXp+F+Ui7WV3grZm++QhO9p4z/HtZQlUqwB5RSRuel 7MdJlTKvT469CGLPcJJ+QA1ULxj93Pb/r+e9mmFX194YoUgMHFWAPtuHViM3e7F+ ORPBYPBGwUzJftP4nWyU+P2ApTMS7yMWksBNy+IF2SKSczklFf8DwCp5hXPYeqAn Mcm9vty205nQaaF+l2xSGLV8nscw3wKwNmrqn8ORHrHQdnMhT8LyPmsAre84bu/h m5reqn6ASEt5iKL0gWUPzLJGEf9Q1wG+s4n1wb5HVD1eCUCmbzs= =RBMT -----END PGP SIGNATURE----- Merge tag 'livepatching-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching update from Petr Mladek: - Use more informative names for the livepatch transition states * tag 'livepatching-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Rename KLP_* to KLP_TRANSITION_* |
||
|
Linus Torvalds
|
a19264d086 |
printk changes for 6.10
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmZEh6AACgkQUqAMR0iA lPJzFw/+PCKHOFI1Z5Aj9negx97sYKAIuJrY9pFQfaxVUBzqZgIEXB/rkn4yurad KpK1UppMnLset+GLm+95+BTyP7G256q2jhWZ9u55i089YGrUKcibp+Jy9cCO02r5 1c0+ZkyMxONgPnE+WcOW7B5p34cie6NFdvqrRzrW5WB4eLaGs3ksBow2j3jXWTii aOrsPPZWmT6wEJd4Hm1kZIgnz8gmlsm+VGTSHjjEvWWtvh5garKxCQ3COmdw1WAc dL+YjYqTIOQsifJeOpECy8+hZA4uoKpw2dWxfdHEH7F8RkhdumQdWxiGON+KXwXA cG1rIaas0gGvVpcvja/bPiATwzqTmXlGAHlrwiDEeiNqh/VckinDw/S82QdIVTii qttE2yv8cAVCpsk8GVjuE7unZREc0Ao2tAIz3on7dzFgVGVsK3mJBGAiqVJWDA/A 3jlFsMoM899IJJ8Fvg0rcu/vkwE4ViiQCurcPgWWqPicHC310PSJ6O0cImbBsL+U kQxpkpEUnlgiDy19vKzhHlGR89xxLUxIiq78TRCYrM+NQ4PCvdGQMHe/Wm5EfhPx bgzYcNsWjmN4fzokIl+a641wvTCqiUmUqoy7TU+a8a2ssBNaVrHubMrJzkl2OLts miLz0xXG+RZA0Z1FNqy3+3EyxoGmUJqjM9jomDAxPvMvrNQjMHA= =y45P -----END PGP SIGNATURE----- Merge tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Use no_printk() instead of "if (0) printk()" constructs to avoid generating printk index for messages disabled at compile time - Remove deprecated strncpy/strcpy from printk.c - Remove redundant CONFIG_BASE_FULL in favor of CONFIG_BASE_SMALL * tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: cleanup deprecated uses of strncpy/strcpy printk: Remove redundant CONFIG_BASE_FULL printk: Change type of CONFIG_BASE_SMALL to bool printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled ceph: Use no_printk() helper dyndbg: Use *no_printk() helpers dev_printk: Add and use dev_no_printk() printk: Let no_printk() use _printk() |
||
Justin Stitt
|
efb905aeb4 |
cdrom: rearrange last_media_change check to avoid unintentional overflow
When running syzkaller with the newly reintroduced signed integer wrap
sanitizer we encounter this splat:
[ 366.015950] UBSAN: signed-integer-overflow in ../drivers/cdrom/cdrom.c:2361:33
[ 366.021089] -9223372036854775808 - 346321 cannot be represented in type '__s64' (aka 'long long')
[ 366.025894] program syz-executor.4 is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 366.027502] CPU: 5 PID: 28472 Comm: syz-executor.7 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1
[ 366.027512] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 366.027518] Call Trace:
[ 366.027523] <TASK>
[ 366.027533] dump_stack_lvl+0x93/0xd0
[ 366.027899] handle_overflow+0x171/0x1b0
[ 366.038787] ata1.00: invalid multi_count 32 ignored
[ 366.043924] cdrom_ioctl+0x2c3f/0x2d10
[ 366.063932] ? __pm_runtime_resume+0xe6/0x130
[ 366.071923] sr_block_ioctl+0x15d/0x1d0
[ 366.074624] ? __pfx_sr_block_ioctl+0x10/0x10
[ 366.077642] blkdev_ioctl+0x419/0x500
[ 366.080231] ? __pfx_blkdev_ioctl+0x10/0x10
...
Historically, the signed integer overflow sanitizer did not work in the
kernel due to its interaction with `-fwrapv` but this has since been
changed [1] in the newest version of Clang. It was re-enabled in the
kernel with Commit
|
||
|
Linus Torvalds
|
1ab1bd2f6a |
four smb client fixes, including three important fixes to recent netfs regressions
-----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmZERx0ACgkQiiy9cAdy T1FEpgv/eLoSLo3xK0Ywt+06H8jZs9I7yPWbl+bRMio6aeZdCh9YS9IaNgVrnK6b HFslb9hSKEZApTTJk+fMry7vi6gtCqXCcP2yXU+X+7YXStLtweghW5H2HZ1zP3gN Uj1yGJwAJVJdsbbNwAur7OAqGJwRa49qRQ4g6GbbX6uDbKSYi7u2bJhJd4xb+mLp MQc7oUV5l6ac4sYbgeEvLQLUu4y8BrM1RBF884G+aRN0fxK2Bg5MNJ2i9L/L+5OY n4HPHwsenrtxhCP7NxGKo9kDfVvIrgT9sBO9j329sRIXp3CaU9+wQM+gJJ/QuUI9 ykXy98coy1CW3TyATmuxg91cDA74qL4nyorL59lrCN1V84fF6BNqxUB61mpffN6m x4iWO/zv8x+EQxROobY3qvTkMT3qSvdUgIRZwOm9MNrQRjaOvM6Aoa2xsZiIfkqw m+jETRkC9SiFCZrQUnwNahzcImD5f4F8FjAWAdSfiado9tl64IF1ikT1DE/F+PeN 02e3iSxA =VpdY -----END PGP SIGNATURE----- Merge tag '6.10-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull smb client updates from Steve French: - three important fixes to recent netfs conversion to fix various xfstest failures, and rmmod oops - cleanup patch to fix various GCC-14 warnings * tag '6.10-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb3: fix perf regression with cached writes with netfs conversion cifs: Fix locking in cifs_strict_readv() cifs: Change from mempool_destroy to mempool_exit for request pools smb: smb2pdu.h: Avoid -Wflex-array-member-not-at-end warnings |
||
Masahiro Yamada
|
6ffe4fdf89 |
kconfig: use sym_get_choice_menu() in sym_check_prop()
Choices and their members are associated via the P_CHOICE property. Currently, prop_get_symbol(sym_get_choice_prop()) is used to obtain the choice of the given choice member. Replace it with sym_get_choice_menu(), which retrieves the choice without relying on P_CHOICE. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
Paolo Bonzini
|
cba23f333f |
selftests/kvm: remove dead file
This file was supposed to be removed in commit
|
||
|
Linus Torvalds
|
33e02dc69a |
sound updates for 6.10-rc1
This one became bigger than usual, not in the total size but rather
containing lots of small changes all over the places. The majority of
changes are about ASoC, especially SOF / Intel stuff, and we see an
interesting work for ASoC DAPM graph visualization, while there are
many other code cleanup and refactoring, too.
Core:
- A deadlock fix at device disconnection
- A new tool dapm-graph for visualising the DAPM state
ASoC:
- Large updates throughout the Intel audio drivers
- Fixes and clarifications for the DAPM documentation
- Cleanups of accessors for driver data, module labelling, and for
constification
- Modernsation and cleanup work in the Mediatek drivers
- Several fixes and features for the DaVinci I2S driver
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240
HD-audio:
- Cleanup for CONFIG_PM dependencies
- Cirrus HD-audio codec fixes and quirks
Others:
- Series of tree-wide fixes in Makefiles to use *-y
- Additions of missing module descriptions
- Scarlett2 USB mixer enhancements
- A series of legacy emu10k1 fixes and improvements
-----BEGIN PGP SIGNATURE-----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=YKT4
-----END PGP SIGNATURE-----
Merge tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This one became bigger than usual, not in the total size but rather
containing lots of small changes all over the places.
The majority of changes are about ASoC, especially SOF / Intel stuff,
and we see an interesting work for ASoC DAPM graph visualization,
while there are many other code cleanup and refactoring, too.
Core:
- A deadlock fix at device disconnection
- A new tool dapm-graph for visualising the DAPM state
ASoC:
- Large updates throughout the Intel audio drivers
- Fixes and clarifications for the DAPM documentation
- Cleanups of accessors for driver data, module labelling, and for
constification
- Modernsation and cleanup work in the Mediatek drivers
- Several fixes and features for the DaVinci I2S driver
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240
HD-audio:
- Cleanup for CONFIG_PM dependencies
- Cirrus HD-audio codec fixes and quirks
Others:
- Series of tree-wide fixes in Makefiles to use *-y
- Additions of missing module descriptions
- Scarlett2 USB mixer enhancements
- A series of legacy emu10k1 fixes and improvements"
* tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (603 commits)
ALSA: hda/realtek: Drop doubly quirk entry for 103c:8a2e
ALSA: hda/realtek - fixed headset Mic not show
ASoC: SOF: amd: Fix build error with built-in config
ALSA: scarlett2: Increase mixer range to +12dB
ALSA: scarlett2: Add S/PDIF source selection controls
ALSA: core: Remove superfluous CONFIG_PM
ALSA: Fix deadlocks with kctl removals at disconnection
ASoC: audio-graph-card2: call of_node_get() before of_get_next_child()
ASoC: SOF: amd: Correct spaces in Makefile
ASoC: rt715-sdca-sdw: Fix wrong complete waiting in rt715_dev_resume()
ASoC: Intel: sof_sdw_rt_amp: use dai parameter
ASoC: Intel: sof_sdw: add dai parameter to rtd_init callback
ASoC: Intel: sof_sdw: use .controls/.widgets to add controls/widgets
ASoC: Intel: sof_sdw: add controls and dapm widgets in codec_info
ASoC: Intel: sof_sdw: use generic name for controls/widgets
ASoC: Intel: sof_sdw_cs_amp: rename Speakers to Speaker
ASoC: Intel: maxim-common: change max98373 data to static
ASoC: Intel: sof_sdw: add max98373 dapm routes
ASoC: Intel: sof_rt5682: use max_98373_dai_link function
ASoC: Intel: sof_nau8825: use max_98373_dai_link function
...
|
||
|
Linus Torvalds
|
d34672777d |
fbdev fixes and cleanups for 6.10-rc1:
Code cleanups for offb, shmobile, sisfb, savage, au1200fb, uvesafb, omap2 and sh7760fb, as well as the addition of some HAS_IOPORT dependencies and adjustment of generated logo file to make build reproducible. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZkSoqQAKCRD3ErUQojoP Xx6yAQC8ov8IrH0bqaSDC1tNygGm4FhE658DbB/RxOzXYoHtlAD/cCjPcYGruTr8 EG+/Pq5mmGR8IYY6ANl7UAEIOjatHQc= =D2j+ -----END PGP SIGNATURE----- Merge tag 'fbdev-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev updates from Helge Deller: "Code cleanups for offb, shmobile, sisfb, savage, au1200fb, uvesafb, omap2 and sh7760fb, as well as the addition of some HAS_IOPORT dependencies and adjustment of generated logo file to make build reproducible" * tag 'fbdev-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: offb: replace of_node_put with __free(device_node) fbdev: savage: Handle err return when savagefb_check_var failed video: hdmi: prefer length specifier in format over string copying fbdev: uvesafb: replace deprecated strncpy with strscpy_pad fbdev: au1200fb: replace deprecated strncpy with strscpy fbdev: fsl-diu-fb: replace deprecated strncpy with strscpy_pad video: logo: Drop full path of the input filename in generated file fbdev: add HAS_IOPORT dependencies fbdev: sh7760fb: allow modular build fbdev: sisfb: hide unused variables fbdev: shmobile: fix snprintf truncation fbdev: omap2: replace of_graph_get_next_endpoint() |
||
|
Linus Torvalds
|
db5d28c0bf |
drm for 6.10-rc1
new drivers: - panthor: ARM Mali/Immortalis CSF-based GPU driver core: - add a CONFIG_DRM_WERROR option - make more headers self-contained - grab resv lock in pin/unpin - fix vmap resv locking - EDID/eDP panel matching - Kconfig cleanups - DT sound bindings - Add SIZE_HINTS property for cursor planes - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - drop seq_file.h from a bunch of places - use drm_edid driver conversions dp: - DP Tunnel documentation - MST read sideband cap - Adaptive sync SDP prep work ttm: - improve placement for TTM BOs in idle/busy handling panic: - Fixes for drm-panic, and option to test it. - Add drm panic to simpledrm, mgag200, imx, ast bridge: - improve init ordering - adv7511: allow GPIO pin sharing - tc358775: add tc358675 support panel: - AUO B120XAN01.0 - Samsung s6e3fa7 - BOE NT116WHM-N44 - CMN N116BCA-EA1, - CrystalClear CMT430B19N00 - Startek KD050HDFIA020-C020A - powertip PH128800T006-ZHC01 - Innolux G121X1-L03 - LG sw43408 - Khadas TS050 V2 - EDO RM69380 OLED - CSOT MNB601LS1-1 amdgpu: - HDCP/ODM/RAS fixes - Devcoredump improvements - Expose VCN activity via sysfs - SMY 13.0.x updates - Enable fast updates on DCN 3.1.4 - Add dclk and vclk reporting on additional devices - Add ACA RAS infrastructure - Implement TLB flush fence - EEPROM handling fixes - SMUIO 14.0.2 support - SMU 14.0.1 Updates - SMU 14.0.2 support - Sync page table freeing with TLB flushes - DML2 refactor - DC debug improvements - DCN 3.5.x Updates - GPU reset fixes - HDP fix for second GFX pipe on GC 10.x - Enable secondary GFX pipe on GC 10.3 - Refactor and clean up BACO/BOCO/BAMACO handling - Remove invalid TTM resource start check - UAF fix in VA IOCTL - GPUVM page fault redirection to secondary IH rings for IH 6.x - Initial support for mapping kernel queues via MES - Fix VRAM memory accounting amdkfd: - MQD handling cleanup - Preemption handling fixes for XCDs - TLB flush fix for GC 9.4.2 - Properly clean up workqueue during module unload - Fix memory leak process create failure - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace - Fix eviction fence handling - Fix leak in GPU memory allocation failure case - DMABuf import handling fix - Enable SQ watchpoint for gfx10 i915: - Adding new DG2 PCI ID - add context hints for GT frequency - enable only one CCS for compute workloads - new workarounds - Fix UAF on destroy against retire race and remove two earlier partial fixes - Limit the reserved VM space to only the platforms that need it - Fix gt reset with GuC submission is disable - Add and use gt_to_guc() wrapper i915/xe display: - Lunar Lake display enabling, including cdclk and other refactors - BIOS/VBT/opregion related refactor - Digital port related refactor/clean-up - Fix 2s boot time regression on DP panel replay init - Remove duplication on audio enable/disable on SDVO and g4x+ DP - Disable AuxCCS framebuffers if built for Xe - Make crtc disable more atomic - Increase DP idle pattern wait timeout to 2ms - Start using container_of_const() for some extra const safety - Fix Jasper Lake boot freeze - Enable MST mode for 128b/132b single-stream sideband - Enable Adaptive Sync SDP Support for DP - Fix MTL supported DP rates - removal of UHBR13.5 - PLL refactoring - Limit eDP MSO pipe only for display version 20 - More display refactor towards independence from i915 dev_priv - Convert i915/xe fbdev to DRM client - More initial work to make display code more independent from i915 xe: - improved error capture - clean up some uAPI leftovers - devcoredump update - Add BMG mocs table - Handle GSCCS ER interrupt - Implement xe2- and GuC workarounds - struct xe_device cleanup - Hwmon updates - Add LRC parsing for more GPU instruction - Increase VM_BIND number of per-ioctl Ops - drm/xe: Add XE_BO_GGTT_INVALIDATE flag - Initial development for SR-IOV support - Add new PCI IDs to DG2 platform - Move userptr over to start using hmm_range_fault msm: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. - DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings - GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support radeon: - Silence UBSAN warnings related to flexible arrays nouveau: - move some uAPI objects to uapi headers omapdrm: - console fix ast: - add i2c polling qaic: - add debugfs entries exynos: - fix platform_driver .owner - drop cleanup code mediatek: - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe() - Add GAMMA 12-bit LUT support for MT8188 - Rename mtk_drm_* to mtk_* - Drop driver owner initialization - Correct calculation formula of PHY Timing -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmZEUU0ACgkQDHTzWXnE hr5qMBAAjUFF0w3YOQMsn0LEAm628kMRHpoVeSXmIfO9z9lTyad30EtiS4ggFgj7 Q/oQ6hHCd5jdsvGSJDgtTTAsTQX+aCkXrgf/18ENbqR5mM3MdefUAPR/zawZ7HR4 8+b2h6p7gHBw8wDjuIvQ5e9InHcnIkKWJc82qnJG5Urgxa05SDh3mu3cosPTJiBw a851vlWaYcxC0yAUwJlWaXDdN8yzdFaSQNboZBS/CMLXF/WE6Ht257uxJmaouc0Y Z0kBybok5x0TPQEXF9IV+kuSW3EYpYcwRi0BFFM9sJjkEBdH3rYRZwuYP1LR+7VZ HKsmIkie8YzCm2VwTquYzUvHgF+swZX4RRch9XJlGz7UvBLc0eBO/2n4X6fNd8Kl QGNNqEfsnUQrAHKvGsOUgoGjSCmEo8voGcMZ3JPIAdJ/GcnJwpMvNxtF6XB08hEu rDxuU6o7WkM4dJbtiaFEHNh0Fmjj6aXdBL23UD9pcqPT1fc9cT3xnUd5RJIRuRwV /tpb2WfkFAoxCkKFiunaC4rE8oG6ME6wr/trYjvoYuhCI5hCVaXRBGzJEtC30IP6 lG2YZ8r0jHjktbgjZ0Cz/hY424H4sxSN9SJAnXXFDzcfjBJ/nOgo5nMD1jKajAD5 SYfqWaD5Y+YygtyLJPMfZQI2XMOpCzteXD8uaNXXFJfpV7Apeyg= =ocVM -----END PGP SIGNATURE----- Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "This is the main pull request for the drm subsystems for 6.10. In drivers the main thing is a new driver for ARM Mali firmware based GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and scattered changes to everything else. In the core a bunch of headers and Kconfig was refactored, along with the addition of a new panic handler which is meant to provide a user friendly message when a panic happens and graphical display is enabled. New drivers: - panthor: ARM Mali/Immortalis CSF-based GPU driver Core: - add a CONFIG_DRM_WERROR option - make more headers self-contained - grab resv lock in pin/unpin - fix vmap resv locking - EDID/eDP panel matching - Kconfig cleanups - DT sound bindings - Add SIZE_HINTS property for cursor planes - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - drop seq_file.h from a bunch of places - use drm_edid driver conversions dp: - DP Tunnel documentation - MST read sideband cap - Adaptive sync SDP prep work ttm: - improve placement for TTM BOs in idle/busy handling panic: - Fixes for drm-panic, and option to test it. - Add drm panic to simpledrm, mgag200, imx, ast bridge: - improve init ordering - adv7511: allow GPIO pin sharing - tc358775: add tc358675 support panel: - AUO B120XAN01.0 - Samsung s6e3fa7 - BOE NT116WHM-N44 - CMN N116BCA-EA1, - CrystalClear CMT430B19N00 - Startek KD050HDFIA020-C020A - powertip PH128800T006-ZHC01 - Innolux G121X1-L03 - LG sw43408 - Khadas TS050 V2 - EDO RM69380 OLED - CSOT MNB601LS1-1 amdgpu: - HDCP/ODM/RAS fixes - Devcoredump improvements - Expose VCN activity via sysfs - SMY 13.0.x updates - Enable fast updates on DCN 3.1.4 - Add dclk and vclk reporting on additional devices - Add ACA RAS infrastructure - Implement TLB flush fence - EEPROM handling fixes - SMUIO 14.0.2 support - SMU 14.0.1 Updates - SMU 14.0.2 support - Sync page table freeing with TLB flushes - DML2 refactor - DC debug improvements - DCN 3.5.x Updates - GPU reset fixes - HDP fix for second GFX pipe on GC 10.x - Enable secondary GFX pipe on GC 10.3 - Refactor and clean up BACO/BOCO/BAMACO handling - Remove invalid TTM resource start check - UAF fix in VA IOCTL - GPUVM page fault redirection to secondary IH rings for IH 6.x - Initial support for mapping kernel queues via MES - Fix VRAM memory accounting amdkfd: - MQD handling cleanup - Preemption handling fixes for XCDs - TLB flush fix for GC 9.4.2 - Properly clean up workqueue during module unload - Fix memory leak process create failure - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace - Fix eviction fence handling - Fix leak in GPU memory allocation failure case - DMABuf import handling fix - Enable SQ watchpoint for gfx10 i915: - Adding new DG2 PCI ID - add context hints for GT frequency - enable only one CCS for compute workloads - new workarounds - Fix UAF on destroy against retire race and remove two earlier partial fixes - Limit the reserved VM space to only the platforms that need it - Fix gt reset with GuC submission is disable - Add and use gt_to_guc() wrapper i915/xe display: - Lunar Lake display enabling, including cdclk and other refactors - BIOS/VBT/opregion related refactor - Digital port related refactor/clean-up - Fix 2s boot time regression on DP panel replay init - Remove duplication on audio enable/disable on SDVO and g4x+ DP - Disable AuxCCS framebuffers if built for Xe - Make crtc disable more atomic - Increase DP idle pattern wait timeout to 2ms - Start using container_of_const() for some extra const safety - Fix Jasper Lake boot freeze - Enable MST mode for 128b/132b single-stream sideband - Enable Adaptive Sync SDP Support for DP - Fix MTL supported DP rates - removal of UHBR13.5 - PLL refactoring - Limit eDP MSO pipe only for display version 20 - More display refactor towards independence from i915 dev_priv - Convert i915/xe fbdev to DRM client - More initial work to make display code more independent from i915 xe: - improved error capture - clean up some uAPI leftovers - devcoredump update - Add BMG mocs table - Handle GSCCS ER interrupt - Implement xe2- and GuC workarounds - struct xe_device cleanup - Hwmon updates - Add LRC parsing for more GPU instruction - Increase VM_BIND number of per-ioctl Ops - drm/xe: Add XE_BO_GGTT_INVALIDATE flag - Initial development for SR-IOV support - Add new PCI IDs to DG2 platform - Move userptr over to start using hmm_range_fault msm: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. - DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings - GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support radeon: - Silence UBSAN warnings related to flexible arrays nouveau: - move some uAPI objects to uapi headers omapdrm: - console fix ast: - add i2c polling qaic: - add debugfs entries exynos: - fix platform_driver .owner - drop cleanup code mediatek: - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe() - Add GAMMA 12-bit LUT support for MT8188 - Rename mtk_drm_* to mtk_* - Drop driver owner initialization - Correct calculation formula of PHY Timing" * tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits) drm/xe/ads: Use flexible-array drm/xe: Use ordered WQ for G2H handler drm/msm/gen_header: allow skipping the validation drm/msm/a6xx: Cleanup indexed regs const'ness drm/msm: Add devcoredump support for a750 drm/msm: Adjust a7xx GBIF debugbus dumping drm/msm: Update a6xx registers XML drm/msm: Fix imported a750 snapshot header for upstream drm/msm: Import a750 snapshot registers from kgsl MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails drm/msm/adreno: fix CP cycles stat retrieval on a7xx drm/msm/a7xx: allow writing to CP_BV counter selection registers drm: zynqmp_dpsub: Always register bridge Revert "drm/bridge: ti-sn65dsi83: Fix enable error path" drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer() drm/fbdev-generic: Do not set physical framebuffer address drm/panthor: Fix the FW reset logic drm/panthor: Make sure we handle 'unknown group state' case properly ... |
||
Andrii Nakryiko
|
2322113ac9 |
selftests/bpf: add more variations of map-in-map situations
Add test cases validating usage of PERCPU_ARRAY and PERCPU_HASH maps as inner maps. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20240515062440.846086-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Andrii Nakryiko
|
9ee9822908 |
bpf: save extended inner map info for percpu array maps as well
ARRAY_OF_MAPS and HASH_OF_MAPS map types have special logic to save
a few extra fields required for correct operations of ARRAY maps, when
they are used as inner maps. PERCPU_ARRAY maps have similar
requirements as they now support generating inline element lookup
logic. So make sure that both classes of maps are handled correctly.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes:
|
||
Puranjay Mohan
|
325423cafc |
MAINTAINERS: Update ARM64 BPF JIT maintainer
Zi Shen Lim is not actively doing kernel development and has decided to tranfer the responsibility of maintaining the JIT to me. Add myself as the maintainer for BPF JIT for ARM64 and remove Zi Shen Lim. Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Acked-by: Zi Shen Lim <zlim.lnx@gmail.com> Link: https://lore.kernel.org/r/20240514183914.27737-1-puranjay@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Puranjay Mohan
|
7a8030057f |
bpf, docs: Fix the description of 'src' in ALU instructions
An ALU instruction's source operand can be the value in the source register or the 32-bit immediate value encoded in the instruction. This is controlled by the 's' bit of the 'opcode'. The current description explicitly uses the phrase 'value of the source register' when defining the meaning of 'src'. Change the description to use 'source operand' in place of 'value of the source register'. Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Acked-by: Dave Thaler <dthaler1968@gmail.com> Link: https://lore.kernel.org/r/20240514130303.113607-1-puranjay@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Andrii Nakryiko
|
1de27bba6d |
libbpf: fix feature detectors when using token_fd
Adjust `union bpf_attr` size passed to kernel in two feature-detecting
functions to take into account prog_token_fd field.
Libbpf is avoiding memset()'ing entire `union bpf_attr` by only using
minimal set of bpf_attr's fields. Two places have been missed when
wiring BPF token support in libbpf's feature detection logic.
Fix them trivially.
Fixes:
|
||
|
Linus Torvalds
|
46c6d2b186 |
Hi,
Adds a self-test testing PCKS#7 signed data against ECDSA key and couple of bug fixes for missing deps. BR, Jarkko -----BEGIN PGP SIGNATURE----- iJYEABYKAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCZkLGKyAcamFya2tvLnNh a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0jvXAP9yPAiK7nGu/xgj Nx4xJnMnMDeS4br4Kisp232pLqovxgEAgabmbihLve5Dv1OzR+pNz6qNhackj4ra C0RaWPFQlQQ= =/eej -----END PGP SIGNATURE----- Merge tag 'asymmetric-keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull asymmetric keys update from Jarkko Sakkinen: "Add a self-test testing PCKS#7 signed data against ECDSA key and couple of bug fixes for missing deps" * tag 'asymmetric-keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: certs: Add ECDSA signature verification self-test certs: Move RSA self-test data to separate file KEYS: asymmetric: Add missing dependencies of FIPS_SIGNATURE_SELFTEST KEYS: asymmetric: Add missing dependency on CRYPTO_SIG |
||
Filipe Manana
|
dddff821b6 |
btrfs: fix end of tree detection when searching for data extent ref
At lookup_extent_data_ref() we are incorrectly checking if we are at the
last slot of the last leaf in the extent tree. We are returning -ENOENT
if btrfs_next_leaf() returns a value greater than 1, but btrfs_next_leaf()
never returns anything greater than 1:
1) It returns < 0 on error;
2) 0 if there is a next leaf (or a new item was added to the end of the
current leaf after releasing the path);
3) 1 if there are no more leaves (and no new items were added to the last
leaf after releasing the path).
So fix this by checking if the return value is greater than zero instead
of being greater than one.
Fixes:
|
||
Lu Yao
|
b4e585fffc |
btrfs: scrub: initialize ret in scrub_simple_mirror() to fix compilation warning
The following error message is displayed: ../fs/btrfs/scrub.c:2152:9: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized]" Compiler version: gcc version: (Debian 10.2.1-6) 10.2.1 20210110 Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Lu Yao <yaolu@kylinos.cn> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Filipe Manana
|
0090d6e1b2 |
btrfs: zoned: fix use-after-free due to race with dev replace
While loading a zone's info during creation of a block group, we can race with a device replace operation and then trigger a use-after-free on the device that was just replaced (source device of the replace operation). This happens because at btrfs_load_zone_info() we extract a device from the chunk map into a local variable and then use the device while not under the protection of the device replace rwsem. So if there's a device replace operation happening when we extract the device and that device is the source of the replace operation, we will trigger a use-after-free if before we finish using the device the replace operation finishes and frees the device. Fix this by enlarging the critical section under the protection of the device replace rwsem so that all uses of the device are done inside the critical section. CC: stable@vger.kernel.org # 6.1.x: |
||
Boris Burkov
|
2b8aa78cf1 |
btrfs: qgroup: fix qgroup id collision across mounts
If we delete subvolumes whose ID is the largest in the filesystem, then
unmount and mount again, then btrfs_init_root_free_objectid on the
tree_root will select a subvolid smaller than that one and thus allow
reusing it.
If we are also using qgroups (and particularly squotas) it is possible
to delete the subvol without deleting the qgroup. In that case, we will
be able to create a new subvol whose id already has a level 0 qgroup.
This will result in re-using that qgroup which would then lead to
incorrect accounting.
Fixes:
|