The recent conversion to the automatic kfree() forgot to mark a
variable with __free(kfree), leading to memory leaks. Fix it.
Fixes: 1052d98822 ("ALSA: control: Use automatic cleanup of kfree()")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/r/c1e2ef3c-164f-4840-9b1c-f7ca07ca422a@alu.unizg.hr
Message-ID: <20240320062722.31325-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit d510296d33 ("bpftool: Use syscall/loader program in "prog load"
and "gen skeleton" command.") added new files to the list of objects to
compile in order to build the bootstrap version of bpftool. As far as I
can tell, these objects are unnecessary and were added by mistake; maybe
a draft version intended to add support for loading loader programs from
the bootstrap version. Anyway, we can remove these object files from the
list to make the bootstrap bpftool binary a tad smaller and faster to
build.
Fixes: d510296d33 ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.")
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Message-ID: <20240320013457.44808-1-qmo@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When trying to load the pid_iter BPF program used to iterate over the
PIDs of the processes holding file descriptors to BPF links, we would
unconditionally silence libbpf in order to keep the output clean if the
kernel does not support iterators and loading fails.
Although this is the desirable behaviour in most cases, this may hide
bugs in the pid_iter program that prevent it from loading, and it makes
it hard to debug such load failures, even in "debug" mode. Instead, it
makes more sense to print libbpf's logs when we pass the -d|--debug flag
to bpftool, so that users get the logs to investigate failures without
having to edit bpftool's source code.
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Message-ID: <20240320012241.42991-1-qmo@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko says:
====================
BPF raw tracepoint support for BPF cookie
Add ability to specify and retrieve BPF cookie for raw tracepoint programs.
Both BTF-aware (SEC("tp_btf")) and non-BTF-aware (SEC("raw_tp")) are
supported, as they are exactly the same at runtime.
This issue recently came up in production use cases, where custom tried to
switch from slower classic tracepoints to raw tracepoints and ran into this
limitation. Luckily, it's not that hard to support this for raw_tp programs.
v2->v3:
- s/bpf_raw_tp_open/bpf_raw_tracepoint_open_opts/ (Alexei, Eduard);
v1->v2:
- fixed type definition for stubs of bpf_probe_{register,unregister};
- added __u32 :u32 and aligned raw_tp fields (Jiri);
- added Stanislav's ack.
====================
Link: https://lore.kernel.org/r/20240319233852.1977493-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add test validating BPF cookie can be passed during raw_tp/tp_btf
attachment and can be retried at runtime with bpf_get_attach_cookie()
helper.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319233852.1977493-6-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Wire up BPF cookie passing or raw_tp and tp_btf programs, both in
low-level and high-level APIs.
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319233852.1977493-5-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Wire up BPF cookie for raw tracepoint programs (both BTF and non-BTF
aware variants). This brings them up to part w.r.t. BPF cookie usage
with classic tracepoint and fentry/fexit programs.
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319233852.1977493-4-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of passing prog as an argument to bpf_trace_runX() helpers, that
are called from tracepoint triggering calls, store BPF link itself
(struct bpf_raw_tp_link for raw tracepoints). This will allow to pass
extra information like BPF cookie into raw tracepoint registration.
Instead of replacing `struct bpf_prog *prog = __data;` with
corresponding `struct bpf_raw_tp_link *link = __data;` assignment in
`__bpf_trace_##call` I just passed `__data` through into underlying
bpf_trace_runX() call. This works well because we implicitly cast `void *`,
and it also avoids naming clashes with arguments coming from
tracepoint's "proto" list. We could have run into the same problem with
"prog", we just happened to not have a tracepoint that has "prog" input
argument. We are less lucky with "link", as there are tracepoints using
"link" argument name already. So instead of trying to avoid naming
conflicts, let's just remove intermediate local variable. It doesn't
hurt readibility, it's either way a bit of a maze of calls and macros,
that requires careful reading.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319233852.1977493-3-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_probe_register() and __bpf_probe_register() have identical
signatures and bpf_probe_register() just redirect to
__bpf_probe_register(). So get rid of this extra function call step to
simplify following the source code.
It has no difference at runtime due to inlining, of course.
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319233852.1977493-2-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A64_LDRSW() takes three registers: Xt, Xn, Xm as arguments and it loads
and sign extends the value at address Xn + Xm into register Xt.
Currently, the offset is being directly used in place of the tmp
register which has the offset already loaded by the last emitted
instruction.
This will cause JIT failures. The easiest way to reproduce this is to
test the following code through test_bpf module:
{
"BPF_LDX_MEMSX | BPF_W",
.u.insns_int = {
BPF_LD_IMM64(R1, 0x00000000deadbeefULL),
BPF_LD_IMM64(R2, 0xffffffffdeadbeefULL),
BPF_STX_MEM(BPF_DW, R10, R1, -7),
BPF_LDX_MEMSX(BPF_W, R0, R10, -7),
BPF_JMP_REG(BPF_JNE, R0, R2, 1),
BPF_ALU64_IMM(BPF_MOV, R0, 0),
BPF_EXIT_INSN(),
},
INTERNAL,
{ },
{ { 0, 0 } },
.stack_depth = 7,
},
We need to use the offset as -7 to trigger this code path, there could
be other valid ways to trigger this from proper BPF programs as well.
This code is rejected by the JIT because -7 is passed to A64_LDRSW() but
it expects a valid register (0 - 31).
roott@pjy:~# modprobe test_bpf test_name="BPF_LDX_MEMSX | BPF_W"
[11300.490371] test_bpf: test_bpf: set 'test_bpf' as the default test_suite.
[11300.491750] test_bpf: #345 BPF_LDX_MEMSX | BPF_W
[11300.493179] aarch64_insn_encode_register: unknown register encoding -7
[11300.494133] aarch64_insn_encode_register: unknown register encoding -7
[11300.495292] FAIL to select_runtime err=-524
[11300.496804] test_bpf: Summary: 0 PASSED, 1 FAILED, [0/0 JIT'ed]
modprobe: ERROR: could not insert 'test_bpf': Invalid argument
Applying this patch fixes the issue.
root@pjy:~# modprobe test_bpf test_name="BPF_LDX_MEMSX | BPF_W"
[ 292.837436] test_bpf: test_bpf: set 'test_bpf' as the default test_suite.
[ 292.839416] test_bpf: #345 BPF_LDX_MEMSX | BPF_W jited:1 156 PASS
[ 292.844794] test_bpf: Summary: 1 PASSED, 0 FAILED, [1/1 JIT'ed]
Fixes: cc88f540da ("bpf, arm64: Support sign-extension load instructions")
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Message-ID: <20240312235917.103626-1-puranjay12@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's been reported that (void *)map->map_extra is causing compilation
warnings on 32-bit architectures. It's easy enough to fix this by
casting to long first.
Fixes: 79ff13e991 ("libbpf: Add support for bpf_arena.")
Reported-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319215143.1279312-1-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kui-Feng Lee reported a crash on s390x triggered by the
dummy_st_ops/dummy_init_ptr_arg test [1]:
[<0000000000000002>] 0x2
[<00000000009d5cde>] bpf_struct_ops_test_run+0x156/0x250
[<000000000033145a>] __sys_bpf+0xa1a/0xd00
[<00000000003319dc>] __s390x_sys_bpf+0x44/0x50
[<0000000000c4382c>] __do_syscall+0x244/0x300
[<0000000000c59a40>] system_call+0x70/0x98
This is caused by GCC moving memcpy() after assignments in
bpf_jit_plt(), resulting in NULL pointers being written instead of
the return and the target addresses.
Looking at the GCC internals, the reordering is allowed because the
alias analysis thinks that the memcpy() destination and the assignments'
left-hand-sides are based on different objects: new_plt and
bpf_plt_ret/bpf_plt_target respectively, and therefore they cannot
alias.
This is in turn due to a violation of the C standard:
When two pointers are subtracted, both shall point to elements of the
same array object, or one past the last element of the array object
...
From the C's perspective, bpf_plt_ret and bpf_plt are distinct objects
and cannot be subtracted. In the practical terms, doing so confuses the
GCC's alias analysis.
The code was written this way in order to let the C side know a few
offsets defined in the assembly. While nice, this is by no means
necessary. Fix the noncompliance by hardcoding these offsets.
[1] https://lore.kernel.org/bpf/c9923c1d-971d-4022-8dc8-1364e929d34c@gmail.com/
Fixes: f1d5df84cd ("s390/bpf: Implement bpf_arch_text_poke()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240320015515.11883-1-iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure exec queue freeing happens at one place, that is in
__xe_exec_queue_free(). It releases q->vm reference also. Set
q->vm before handling extensions as they can potentially reference it.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319175947.15890-1-niranjana.vishwanathapura@intel.com
Abstract out the core part of sched_done and deregister_done handlers
to separate functions to decouple them from any protocol error handling
part and make them more readable.
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319184153.16667-1-niranjana.vishwanathapura@intel.com
For Earlier platforms, the Pipe source size is 12-bits so
max pipe source width and height is 4096. For newer platforms it is
13-bits so theoretically max width/height is 8192. For few of the
earlier platforms the scaler did not use all bits of the PIPESRC,
so max scaler source size was used to make that the pipe source
size is programmed within limits, before using scaler.
This creates a problem, for MTL where scaler source size is 4096, but
max pipe source width can theroretically be 8192.
Switch the check to use the max scaler destination size, which closely
match the limits.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313143825.3461208-1-ankit.k.nautiyal@intel.com
The timerlat tracer provides an interface for any application to wait
for the timerlat's periodic wakeup. Currently, rtla timerlat uses it
to dispatch its user-space workload (-u option).
But as the tracer interface is generic, rtla timerlat can also be used
to monitor any workload that uses it. For example, a user might
place their own workload to wait on the tracer interface, and
monitor the results with rtla timerlat.
Add the -U option to rtla timerlat top and hist. With this option, rtla
timerlat will not dispatch its workload but only setting up the
system, waiting for a user to dispatch its workload.
The sample code in this patch is an example of python application
that loops in the timerlat tracer fd.
To use it, dispatch:
# rtla timerlat -U
In a terminal, then run the python program on another terminal,
specifying the CPU to run it. For example, setting on CPU 1:
#./timerlat_load.py 1
Then rtla timerlat will start printing the statistics of the
./timerlat_load.py app.
An interesting point is that the "Ret user Timer Latency" value
is the overall response time of the load. The sample load does
a memory copy to exemplify that.
The stop tracing options on rtla timerlat works in this setup
as well, including auto analysis.
Link: https://lkml.kernel.org/r/36e6bcf18fe15c7601048fd4c65aeb193c502cc8.1707229706.git.bristot@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Use tools/build/ makefiles to build rv, inheriting the benefits of
it. For example, having a proper way to handle dependencies.
Link: https://lkml.kernel.org/r/2a38a8f7b8dc65fa790381ec9ab42fb62beb2e25.1710519524.git.bristot@kernel.org
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Use tools/build/ makefiles to build rtla, inheriting the benefits of
it. For example, having a proper way to handle dependencies.
rtla is built using perf infra-structure when building inside the
kernel tree.
At this point, rtla diverges from perf in two points: Documentation
and tarball generation/build.
At the documentation level, rtla is one step ahead, placing the
documentation at Documentation/tools/rtla/, using the same build
tools as kernel documentation. The idea is to move perf
documentation to the same scheme and then share the same makefiles.
rtla has a tarball target that the (old) RHEL8 uses. The tarball was
kept using a simple standalone makefile for compatibility. The
standalone makefile shares most of the code, e.g., flags, with
regular buildings.
The tarball method was set as deprecated. If necessary, we can make
a rtla tarball like perf, which includes the entire tools/build.
But this would also require changes in the user side (the directory
structure changes, and probably the deps to build the package).
Inspired on perf and objtool.
Link: https://lkml.kernel.org/r/57563abf2715d22515c0c54a87cff3849eca5d52.1710519524.git.bristot@kernel.org
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Use tools/build/ makefiles to build latency-collector, inheriting
the benefits of it. For example: Before this patch, a missing
tracefs/traceevents headers will result in fail like this:
~/linux/tools/tracing/latency $ make
cc -Wall -Wextra -g -O2 -o latency-collector latency-collector.c -lpthread
latency-collector.c:26:10: fatal error: tracefs.h: No such file or directory
26 | #include <tracefs.h>
| ^~~~~~~~~~~
compilation terminated.
make: *** [Makefile:14: latency-collector] Error 1
Which is not that helpful. After this change it reports:
~/linux/tools/tracing/latency# make
Auto-detecting system features:
... libtraceevent: [ OFF ]
... libtracefs: [ OFF ]
libtraceevent is missing. Please install libtraceevent-dev/libtraceevent-devel
libtracefs is missing. Please install libtracefs-dev/libtracefs-devel
Makefile.config:29: *** Please, check the errors above.. Stop.
This type of output is common across other tools in tools/ like perf
and objtool.
Link: https://lkml.kernel.org/r/872420b0880b11304e4ba144a0086c6478c5b469.1710519524.git.bristot@kernel.org
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
In case the LCDIF is enabled in DT but unused, the clocks used by the
LCDIF are not enabled. Those clocks may even have a use count of 0 in
case there are no other users of those clocks. This can happen e.g. in
case the LCDIF drives HDMI bridge which has no panel plugged into the
HDMI connector.
Do not attempt to disable clocks in the suspend callback and re-enable
clocks in the resume callback unless the LCDIF is enabled and was in
use before the system entered suspend, otherwise the driver might end
up trying to disable clocks which are already disabled with use count
0, and would trigger a warning from clock core about this condition.
Note that the lcdif_rpm_suspend() and lcdif_rpm_resume() functions
internally perform the clocks disable and enable operations and act
as runtime PM hooks too.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Fixes: 9db35bb349 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226082644.32603-1-marex@denx.de
Due to a c&p error, port new reply fills-up cmd with wrong value,
any other existing port command replies and notifications.
Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.
Skimmed through devlink userspace implementations, none of them cares
about this cmd value.
Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://lore.kernel.org/all/ZfZcDxGV3tSy4qsV@cy-server/
Fixes: cd76dcd68d ("devlink: Support add and delete devlink port")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20240318091908.2736542-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix race condition leading to system crash during EEH error handling
During EEH error recovery, the bnx2x driver's transmit timeout logic
could cause a race condition when handling reset tasks. The
bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(),
which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload()
SGEs are freed using bnx2x_free_rx_sge_range(). However, this could
overlap with the EEH driver's attempt to reset the device using
bnx2x_io_slot_reset(), which also tries to free SGEs. This race
condition can result in system crashes due to accessing freed memory
locations in bnx2x_free_rx_sge()
799 static inline void bnx2x_free_rx_sge(struct bnx2x *bp,
800 struct bnx2x_fastpath *fp, u16 index)
801 {
802 struct sw_rx_page *sw_buf = &fp->rx_page_ring[index];
803 struct page *page = sw_buf->page;
....
where sw_buf was set to NULL after the call to dma_unmap_page()
by the preceding thread.
EEH: Beginning: 'slot_reset'
PCI 0011:01:00.0#10000: EEH: Invoking bnx2x->slot_reset()
bnx2x: [bnx2x_io_slot_reset:14228(eth1)]IO slot reset initializing...
bnx2x 0011:01:00.0: enabling device (0140 -> 0142)
bnx2x: [bnx2x_io_slot_reset:14244(eth1)]IO slot reset --> driver unload
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc0080000025065fc
Oops: Kernel access of bad area, sig: 11 [#1]
.....
Call Trace:
[c000000003c67a20] [c00800000250658c] bnx2x_io_slot_reset+0x204/0x610 [bnx2x] (unreliable)
[c000000003c67af0] [c0000000000518a8] eeh_report_reset+0xb8/0xf0
[c000000003c67b60] [c000000000052130] eeh_pe_report+0x180/0x550
[c000000003c67c70] [c00000000005318c] eeh_handle_normal_event+0x84c/0xa60
[c000000003c67d50] [c000000000053a84] eeh_event_handler+0xf4/0x170
[c000000003c67da0] [c000000000194c58] kthread+0x1c8/0x1d0
[c000000003c67e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64
To solve this issue, we need to verify page pool allocations before
freeing.
Fixes: 4cace675d6 ("bnx2x: Alloc 4k fragment for each rx ring buffer element")
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240315205535.1321-1-thinhtr@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to connect to networks which require 802.11w, add the
MFP_CAPABLE flag and let mac80211 do the actual crypto in software.
When a robust management frames is received, rx_dec->swdec is not set,
even though the HW did not decrypt it. Extend the check and don't set
RX_FLAG_DECRYPTED for these frames in order to use SW decryption.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240314164850.86432-1-martin.kaistra@linutronix.de
The past form of RISCV_FENCE would cause checkpatch.pl to issue
error messages, the example is as follows:
ERROR: space required after that ',' (ctx:VxV)
26: FILE: arch/riscv/include/asm/barrier.h:27:
+#define __smp_mb() RISCV_FENCE(rw,rw)
^
fix the remaining of RISCV_FENCE.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131328.3669364-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Disparate fence implementations are consolidated into fence.h.
Also introduce RISCV_FENCE_ASM to make fence macro more reusable.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131316.3668927-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Introduce RISCV_FULL_BARRIER and use in arch_atomic* function.
like RISCV_ACQUIRE_BARRIER and RISCV_RELEASE_BARRIER, the fence
instruction can be eliminated When SMP is not enabled.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131302.3668481-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Introduce __{mb,rmb,wmb}, and rely on the generic definitions for
{mb,rmb,wmb}. Although KCSAN is not supported yet, the definitions can
be made more consistent with generic instrumentation. Also add a space
to make the changes pass check by checkpatch.pl.
Without the space, the error message is as below:
ERROR: space required after that ',' (ctx:VxV)
26: FILE: arch/riscv/include/asm/barrier.h:23:
+#define __mb() RISCV_FENCE(iorw,iorw)
^
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131249.3668103-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
CONFIG_ACPI_CPPC_CPUFREQ is required to enable CPPC for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240208034414.22579-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
CPPC related config options are currently defined only in ARM specific
file. However, they are required for RISC-V as well. Instead of creating
a new Kconfig.riscv file and duplicating them, move them to the common
Kconfig file and enable RISC-V too.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240208034414.22579-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add cpufreq driver based on ACPI CPPC for RISC-V. The driver uses either
SBI CPPC interfaces or the CSRs to access the CPPC registers as defined
by the RISC-V FFH spec.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240208034414.22579-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The ACPI processor driver is not currently enabled for RISC-V.
This is required to enable CPU related functionalities like
LPI and CPPC. Hence, enable ACPI_PROCESSOR for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Enable Low Power Idle (LPI) based cpuidle driver for RISC-V platforms.
It depends on SBI HSM calls for idle state transitions.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
To support ACPI Low Power Idle (LPI), few functions are required which
are currently static functions in the DT based cpuidle driver. Hence,
move them under arch/riscv so that ACPI driver also can use them. Since
they are no longer static functions, append "riscv_" prefix to the
function name.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Assorted bugfixes.
Most are fixes for simple assertion pops; the most significant fix is
for a deadlock in recovery when we have to rewrite large numbers of
btree nodes to fix errors. This was incorrectly running out of the same
workqueue as the core interior btree update path - we now give it its
own single threaded workqueue.
This was visible to users as "bch2_btree_update_start(): error:
BCH_ERR_journal_reclaim_would_deadlock" - and then recovery hanging.
-----BEGIN PGP SIGNATURE-----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=J/hu
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-03-19' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Assorted bugfixes.
Most are fixes for simple assertion pops; the most significant fix is
for a deadlock in recovery when we have to rewrite large numbers of
btree nodes to fix errors. This was incorrectly running out of the
same workqueue as the core interior btree update path - we now give it
its own single threaded workqueue.
This was visible to users as "bch2_btree_update_start(): error:
BCH_ERR_journal_reclaim_would_deadlock" - and then recovery hanging"
* tag 'bcachefs-2024-03-19' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix lost wakeup on journal shutdown
bcachefs; Fix deadlock in bch2_btree_update_start()
bcachefs: ratelimit errors from async_btree_node_rewrite
bcachefs: Run check_topology() first
bcachefs: Improve bch2_fatal_error()
bcachefs: Fix lost transaction restart error
bcachefs: Don't corrupt journal keys gap buffer when dropping alloc info
bcachefs: fix for building in userspace
bcachefs: bch2_snapshot_is_ancestor() now safe to call in early recovery
bcachefs: Fix nested transaction restart handling in bch2_bucket_gens_init()
bcachefs: Improve sysfs internal/btree_updates
bcachefs: Split out btree_node_rewrite_worker
bcachefs: Fix locking in bch2_alloc_write_key()
bcachefs: Avoid extent entry type assertions in .invalid()
bcachefs: Fix spurious -BCH_ERR_transaction_restart_nested
bcachefs: Fix check_key_has_snapshot() call
bcachefs: Change "accounting overran journal reservation" to a warning
In order to have all task compat bit access directly in compat.h, introduce
set_compat_task() to set/reset those when needed.
Also, since it's only used on an if/else scenario, simplify the macro using
it.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240103160024.70305-7-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
task_user_regset_view() makes use of a function very similar to
is_compat_task(), but pointing to a any thread.
In arm64 asm/compat.h there is a function very similar to that:
is_compat_thread(struct thread_info *thread)
Copy this function to riscv asm/compat.h and make use of it into
task_user_regset_view().
Also, introduce a compile-time test for CONFIG_COMPAT and simplify the
function code by removing the #ifdef.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20240103160024.70305-6-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently several places will test for CONFIG_COMPAT before testing
is_compat_task(), probably in order to avoid a run-time test into the task
structure.
Since is_compat_task() is an inlined function, it would be helpful to add a
compile-time test of CONFIG_COMPAT, making sure it always returns zero when
the option is not enabled during the kernel build.
With this, the compiler is able to understand in build-time that
is_compat_task() will always return 0, and optimize-out some of the extra
code introduced by the option.
This will also allow removing a lot #ifdefs that were introduced, and make
the code more clean.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20240103160024.70305-5-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
There is some code that detects compat mode into a task by checking the
flag directly, and other code that check using the helper is_compat_task().
Since the helper already exists, use it instead of checking the flags
directly.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Link: https://lore.kernel.org/r/20240103160024.70305-4-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This macro caused me some confusion, which took some reviewer's time to
make it clear, so I propose adding a short comment in code to avoid
confusion in the future.
Also, added some improvements to the macro, such as removing the
assumption of VA_USER_SV57 being the largest address space.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240103160024.70305-3-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In some systems, the netcat server can incur in delay to start listening.
When this happens, the test can randomly fail in various points.
This is an example error message:
# ip gre none gso
# encap 192.168.1.1 to 192.168.1.2, type gre, mac none len 2000
# test basic connectivity
# Ncat: Connection refused.
The issue stems from a race condition between the netcat client and server.
The test author had addressed this problem by implementing a sleep, which
I have removed in this patch.
This patch introduces a function capable of sleeping for up to two seconds.
However, it can terminate the waiting period early if the port is reported
to be listening.
Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240314105911.213411-1-alessandro.carminati@gmail.com
Yonghong Song says:
====================
current_pid_tgid() for all prog types
Currently bpf_get_current_pid_tgid() is allowed in tracing, cgroup
and sk_msg progs while bpf_get_ns_current_pid_tgid() is only allowed
in tracing progs.
We have an internal use case where for an application running
in a container (with pid namespace), user wants to get
the pid associated with the pid namespace in a cgroup bpf
program. Besides cgroup, the only prog type, supporting
bpf_get_current_pid_tgid() but not bpf_get_ns_current_pid_tgid(),
is sk_msg.
But actually both bpf_get_current_pid_tgid() and
bpf_get_ns_current_pid_tgid() helpers do not reveal kernel internal
data and there is no reason that they cannot be used in other
program types. This patch just did this and enabled these
two helpers for all program types.
Patch 1 added the kernel support and patches 2-5 added
the test for cgroup and sk_msg.
Change logs:
v1 -> v2:
- allow bpf_get_[ns_]current_pid_tgid() for all prog types.
- for network related selftests, using netns.
====================
Link: https://lore.kernel.org/r/20240315184849.2974556-1-yonghong.song@linux.dev
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add a sk_msg bpf program test where the program is running in a pid
namespace. The test is successful:
#165/4 ns_current_pid_tgid/new_ns_sk_msg:OK
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240315184915.2976718-1-yonghong.song@linux.dev
Add a cgroup bpf program test where the bpf program is running
in a pid namespace. The test is successfully:
#165/3 ns_current_pid_tgid/new_ns_cgrp:OK
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240315184910.2976522-1-yonghong.song@linux.dev
Refactor some functions in both user space code and bpf program
as these functions are used by later cgroup/sk_msg tests.
Another change is to mark tp program optional loading as later
patches will use optional loading as well since they have quite
different attachment and testing logic.
There is no functionality change.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240315184904.2976123-1-yonghong.song@linux.dev
Replace CHECK in selftest ns_current_pid_tgid with recommended ASSERT_* style.
I also shortened subtest name as the prefix of subtest name is covered
by the test name already.
This patch does fix a testing issue. Currently even if bss->user_{pid,tgid}
is not correct, the test still passed since the clone func returns 0.
I fixed it to return a non-zero value if bss->user_{pid,tgid} is incorrect.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240315184859.2975543-1-yonghong.song@linux.dev
