Fix netfs_unbuffered_write_iter() to return immediately if
generic_write_checks() returns 0, indicating there's nothing to write.
Note that netfs_file_write_iter() already does this.
Also, whilst we're at it, put in checks for the size being zero before we
even take the locks. Note that generic_write_checks() can still reduce the
size to zero, so we still need that check.
Without this, a warning similar to the following is logged to dmesg:
netfs: Zero-sized write [R=1b6da]
and the syscall fails with EIO, e.g.:
/sbin/ldconfig.real: Writing of cache extension data failed: Input/output error
This can be reproduced on 9p by:
xfs_io -f -c 'pwrite 0 0' /xfstest.test/foo
Fixes: 153a9961b5 ("netfs: Implement unbuffered/DIO write support")
Reported-by: Eric Van Hensbergen <ericvh@kernel.org>
Link: https://lore.kernel.org/r/ZbQUU6QKmIftKsmo@FV7GG9FTHL/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240129094924.1221977-3-dhowells@redhat.com
Tested-by: Dominique Martinet <asmadeus@codewreck.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: <v9fs@lists.linux.dev>
cc: <linux_oss@crudebyte.com>
cc: <netfs@lists.linux.dev>
cc: <linux-fsdevel@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
If netfs_begin_read gets a NETFS_DIO_READ request that begins
past i_size, it won't perform any i/o and just return 0. This
will leak an increment to i_dio_count that is done at the top
of the function.
This can cause subsequent buffered read requests to block
indefinitely, waiting for a non existing dio operation to complete.
Add a inode_dio_end() for the NETFS_DIO_READ case, before returning.
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240129094924.1221977-2-dhowells@redhat.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: <linux-afs@lists.infradead.org>
cc: <netfs@lists.linux.dev>
cc: <linux-fsdevel@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The White Hawk Single board is a single-board integration of the Renesas
White Hawk CPU and Breakout board stack, based on the R-Car V4H ES2.0
(R8A779G2) SoC.
For now, the only visible differences compared to the board stack are:
- The SoC is an updated version of R-Car V4H (R8A779G0),
- The serial console uses an FT2232H instead of a CP2102 USB-UART
bridge, with CTS/RTS wired.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/2b8d37949c17cca170c1d9e97f10a100b20c5cd9.1706192990.git.geert+renesas@glider.be
The White Hawk CSI/DSI and RAVB/Ethernet(1000Base-T1) sub boards are not
specific to R-Car V4H.
Hence rename their DTS file names to drop the "r8a779g0-" prefix, and
remove any references to R-Car V4H.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f89613d0df04cfa6196f8797fe655cf7cec812de.1706192990.git.geert+renesas@glider.be
Schematics say that all these 3.3v sources are driven by "D3.3V".
We have a regulator for it already in ulcb.dtsi. Use it instead.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240117131807.24997-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the compatible values for the Renesas R-Car V4H ES2.0
(R8A779G2) SoC and the Renesas White Hawk Single board.
The former is an updated version of R-Car V4H (R8A779G0).
The latter is a single-board integration of the Renesas White Hawk CPU
and Breakout board stack.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/a44d990c962c8e0aac3b133eaa563f8c92b2ce29.1706192990.git.geert+renesas@glider.be
The TRF7970A is a SPI device, not I2C.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RENESAS FemtoClock3 Wireless is a high-performance jitter attenuator,
frequency translator, and clock synthesizer. The device is comprised of 3
digital PLLs (DPLL) to track CLKIN inputs and three independent low phase
noise fractional output dividers (FOD) that output low phase noise clocks.
FemtoClock3 supports one Time Synchronization (Time Sync) channel to enable
an external processor to control the phase and frequency of the Time Sync
channel and to take phase measurements using the TDC. Intended applications
are synchronization using the precision time protocol (PTP) and
synchronization with 0.5 Hz and 1 Hz signals from GNSS.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change is for the PHC devices that can measure the phase offset
between PHC signal and the external signal, such as the 1PPS signal of
GNSS. Reporting PTP_CLOCK_EXTOFF to user space will be piggy-backed to
the existing ptp_extts_event so that application such as ts2phc can
poll the external offset the same way as extts. Hence, ts2phc can use
the offset to achieve the alignment between PHC and the external signal
by the help of either SW or HW filters.
Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Breno Leitao says:
====================
Fix MODULE_DESCRIPTION() for net (p3)
There are hundreds of network modules that misses MODULE_DESCRIPTION(),
causing a warning when compiling with W=1. Example:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com90io.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/arc-rimi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com20020.o
This part3 of the patchset focus on the missing ethernet drivers, which
is now warning free. This also fixes net/pcs and ieee802154.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to arcnet module.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to ieee802154 modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Lynx, XPCS and LynxI PCS drivers.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Beckhoff CX5020 EtherCAT Ethernet driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the TI CPSW switch module.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the STMicro DWMAC for Altera SOCs.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Qualcom rmnet and emac drivers.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the SMSC 91x/911x/9420 Ethernet drivers.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Ocelot SoCs (VSC7514) helpers driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Microchip ENCX24J600 helpers driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As of now, the field TCA_TAPRIO_ATTR_FLAGS is being validated by manually
checking its value, using the function taprio_flags_valid().
With this patch, the field will be validated through the netlink policy
NLA_POLICY_MASK, where the mask is defined by TAPRIO_SUPPORTED_FLAGS.
The mutual exclusivity of the two flags TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD
and TCA_TAPRIO_ATTR_FLAG_TXTIME_ASSIST is still checked manually.
Changes since RFC:
- fixed reversed xmas tree
- use NL_SET_ERR_MSG_MOD() for both invalid configuration
Changes since v1:
- Changed NL_SET_ERR_MSG_MOD to NL_SET_ERR_MSG_ATTR when wrong flags
issued
- Changed __u32 to u32
Changes since v2:
- Added the missing parameter for NL_SET_ERR_MSG_ATTR (sorry again for
the noise)
Signed-off-by: Alessandro Marcolini <alessandromarcolini99@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP rx zerocopy intent is to map pages initially allocated
from NIC drivers, not pages owned by a fs.
This patch adds to can_map_frag() these additional checks:
- Page must not be a compound one.
- page->mapping must be NULL.
This fixes the panic reported by ZhangPeng.
syzbot was able to loopback packets built with sendfile(),
mapping pages owned by an ext4 file to TCP rx zerocopy.
r3 = socket$inet_tcp(0x2, 0x1, 0x0)
mmap(&(0x7f0000ff9000/0x4000)=nil, 0x4000, 0x0, 0x12, r3, 0x0)
r4 = socket$inet_tcp(0x2, 0x1, 0x0)
bind$inet(r4, &(0x7f0000000000)={0x2, 0x4e24, @multicast1}, 0x10)
connect$inet(r4, &(0x7f00000006c0)={0x2, 0x4e24, @empty}, 0x10)
r5 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
0x181e42, 0x0)
fallocate(r5, 0x0, 0x0, 0x85b8)
sendfile(r4, r5, 0x0, 0x8ba0)
getsockopt$inet_tcp_TCP_ZEROCOPY_RECEIVE(r4, 0x6, 0x23,
&(0x7f00000001c0)={&(0x7f0000ffb000/0x3000)=nil, 0x3000, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0}, &(0x7f0000000440)=0x40)
r6 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
0x181e42, 0x0)
Fixes: 93ab6cc691 ("tcp: implement mmap() for zero copy receive")
Link: https://lore.kernel.org/netdev/5106a58e-04da-372a-b836-9d3d0bd2507b@huawei.com/T/
Reported-and-bisected-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: linux-mm@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
rx_data_reassembly skb is stored during NCI data exchange for processing
fragmented packets. It is dropped only when the last fragment is processed
or when an NTF packet with NCI_OP_RF_DEACTIVATE_NTF opcode is received.
However, the NCI device may be deallocated before that which leads to skb
leak.
As by design the rx_data_reassembly skb is bound to the NCI device and
nothing prevents the device to be freed before the skb is processed in
some way and cleaned, free it on the NCI device cleanup.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 6a2968aaf5 ("NFC: basic NCI protocol implementation")
Cc: stable@vger.kernel.org
Reported-by: syzbot+6b7c68d9c21e4ee4251b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/000000000000f43987060043da7b@google.com/
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzkaller reported [1] hitting a warning after failing to allocate
resources for skb in hsr_init_skb(). Since a WARN_ONCE() call will
not help much in this case, it might be prudent to switch to
netdev_warn_once(). At the very least it will suppress syzkaller
reports such as [1].
Just in case, use netdev_warn_once() in send_prp_supervision_frame()
for similar reasons.
[1]
HSR: Could not send supervision frame
WARNING: CPU: 1 PID: 85 at net/hsr/hsr_device.c:294 send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294
RIP: 0010:send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294
...
Call Trace:
<IRQ>
hsr_announce+0x114/0x370 net/hsr/hsr_device.c:382
call_timer_fn+0x193/0x590 kernel/time/timer.c:1700
expire_timers kernel/time/timer.c:1751 [inline]
__run_timers+0x764/0xb20 kernel/time/timer.c:2022
run_timer_softirq+0x58/0xd0 kernel/time/timer.c:2035
__do_softirq+0x21a/0x8de kernel/softirq.c:553
invoke_softirq kernel/softirq.c:427 [inline]
__irq_exit_rcu kernel/softirq.c:632 [inline]
irq_exit_rcu+0xb7/0x120 kernel/softirq.c:644
sysvec_apic_timer_interrupt+0x95/0xb0 arch/x86/kernel/apic/apic.c:1076
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:649
...
This issue is also found in older kernels (at least up to 5.10).
Cc: stable@vger.kernel.org
Reported-by: syzbot+3ae0a3f42c84074b7c8e@syzkaller.appspotmail.com
Fixes: 121c33b07b ("net: hsr: introduce common code for skb initialization")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds hardware profile supports for extracting packet headers.
It makes sure that hardware is capabale of extracting ICMP, CPT, ERSPAN
headers.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a GPIO driver returns a positive integer from one of the direction
setter callbacks, we'll end up propagating it to user-space. Whether we
should sanitize the values returned by callbacks is a different question
but let's first improve the documentation and fortify the contract with
GPIO providers.
Reported-by: José Guilherme de Castro Rodrigues <joseguilhermebh@hotmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
There are no external users for the irq domain helpers so unexport them
and remove the prototypes from the driver header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The locking wrappers were replaces with lock guards. These typedefs are
no longer needed.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
During memory error injection test on kernels >= v6.4, the kernel panics
like below. However, this issue couldn't be reproduced on kernels <= v6.3.
mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134
mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20}
mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86
mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490
mce: [Hardware Error]: Run the above through 'mcelog --ascii'
mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel
Kernel panic - not syncing: Fatal local machine check
The MCA code can recover from an in-kernel #MC if the fixup type is
EX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to
access userspace memory. However, if the fixup type is EX_TYPE_DEFAULT
the only thing that is raised for an in-kernel #MC is a panic.
ex_handler_uaccess() would warn if users gave a non-canonical addresses
(with bit 63 clear) to {get, put}_user(), which was unexpected.
Therefore, commit
b19b74bc99 ("x86/mm: Rework address range check in get_user() and put_user()")
replaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user()
fixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic.
Commit
6014bc2756 ("x86-64: make access_ok() independent of LAM")
added the check gp_fault_address_ok() right before the WARN_ONCE() in
ex_handler_uaccess() to not warn about non-canonical user addresses due
to LAM.
With that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user()
exception fixups in order to be able to handle in-kernel MCEs correctly
again.
[ bp: Massage commit message. ]
Fixes: b19b74bc99 ("x86/mm: Rework address range check in get_user() and put_user()")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240129063842.61584-1-qiuxu.zhuo@intel.com
Add driver for socinfo retrieval. This patch includes the following:
1. mtk-socinfo driver for chip info retrieval
2. Related changes to Makefile and Kconfig
Signed-off-by: William-tw Lin <william-tw.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231222080739.21706-3-william-tw.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Use the new __free() mechanism to remove all gotos and simplify the error
paths.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240122124243.44002-5-brgl@bgdev.pl
AMD MI300 systems include on-die HBM3 memory and a unique topology. And
they fall under Data Fabric version 4.5 in overall design.
Generally, topology information (IDs, etc.) is gathered from Data Fabric
registers. However, the unique topology for MI300 means that some
topology information is fixed in hardware and follows arbitrary
mappings. Furthermore, not all hardware instances are software-visible,
so register accesses must be adjusted.
Recognize and add helper functions for the new MI300 interleave modes.
Add lookup tables for fixed values where appropriate. Adjust how Die and
Node IDs are found and used.
Also, fix some register bitmasks that were mislabeled.
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240128155950.1434067-1-yazen.ghannam@amd.com
The size passed to snprintf() includes the space for the trailing space.
So there is no reason here not to use all the available space.
So remove the -1 when computing 'name_len'.
While at it, use the size of the array directly instead of the intermediate
'name_len' variable.
snprintf() also guaranties that the buffer if NULL terminated, so there is
no need to write an additional trailing NULL "To be sure".
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
While ntfs3 supports discards, FITRIM ioctl() command has defined
only for regular files. This may confuse users trying to invoke
`fstrim` utility with the directory argument (for example, call
`fstrim <mountpoint>` which is the common practice). In this case,
ioctl() returns -ENOTTY without any error messages in kernel ring
buffer, this may be easily interpreted as no support for discards
in ntfs3 driver.
Currently only FITRIM command implemented in ntfs_ioctl() and
passed inode used only for dereferencing NTFS superblock, so
no need for separate ioctl() handler for directories, just add
existing ntfs_ioctl() handler to ntfs_dir_operations.
Signed-off-by: Nekun <nekokun@firemail.cc>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The length of name cannot exceed the space occupied by ea.
Reported-and-tested-by: syzbot+65e940cfb8f99a97aca7@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The issue here is when this is called from ntfs_load_attr_list(). The
"size" comes from le32_to_cpu(attr->res.data_size) so it can't overflow
on a 64bit systems but on 32bit systems the "+ 1023" can overflow and
the result is zero. This means that the kmalloc will succeed by
returning the ZERO_SIZE_PTR and then the memcpy() will crash with an
Oops on the next line.
Fixes: be71b5cba2 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
local_flush_tlb_range_asid() takes the size as argument, not the end of
the range to flush, so fix this by computing the size from the end and
the start of the range.
Fixes: 7a92fc8b4d ("mm: Introduce flush_cache_vmap_early()")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Set the segment size of the virtio_gpu device to the value
used by the drm helpers when allocating sg lists to fix the
following complaint from DMA_API debug code:
DMA-API: virtio-pci 0000:07:00.0: mapping sg segment longer than
device claims to support [len=262144] [max=65536]
Cc: stable@vger.kernel.org
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7258a4cc-da16-5c34-a042-2a23ee396d56@redhat.com
In XFS_DAS_NODE_REMOVE_ATTR case, xfs_attr_mode_remove_attr() sets
filter to XFS_ATTR_INCOMPLETE. The filter is then reset in
xfs_attr_complete_op() if XFS_DA_OP_REPLACE operation is performed.
The filter is not reset though if XFS just removes the attribute
(args->value == NULL) with xfs_attr_defer_remove(). attr code goes
to XFS_DAS_DONE state.
Fix this by always resetting XFS_ATTR_INCOMPLETE filter. The replace
operation already resets this filter in anyway and others are
completed at this step hence don't need it.
Fixes: fdaf1bb3ca ("xfs: ATTR_REPLACE algorithm with LARP enabled needs rework")
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
This reverts commit 67794f882a.
We need to explicitly set up the clock selector to workaround a problem
with the Behringer mixers. This was originally done in d2e8f64125
("ALSA: usb-audio: Explicitly set up the clock selector")
The problem with MOTU M Series mentioned in commit message was fixed in
a different way by checking control capabilities of clock selectors.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240128132338.819273-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>