Return -ENOMEM from of_pci_prop_intr_map() if kcalloc() fails to prevent a
NULL pointer dereference in this case.
Fixes: 407d1a5192 ("PCI: Create device tree node for bridge")
Link: https://lore.kernel.org/r/20240303105729.78624-1-duoming@zju.edu.cn
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
With only one set of defines remaining, state can be almost used as-is to
set ->aspm_disable/default. Only CLKPM and L1 PM substates need special
handling.
Remove unnecessary if conditions that can use the state variable bits
directly. Move ASPM mask calculation into pci_calc_aspm_enable_mask() and
pci_calc_aspm_disable_mask() helpers which makes it easier to alter state
variable directly.
Link: https://lore.kernel.org/r/20240322123952.6384-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The linux/pci.h and aspm.c files define their own sets of link state
related defines which are almost the same.
Consolidate the use of defines into those defined by linux/pci.h and expand
PCIE_LINK_STATE_L0S to match earlier ASPM_STATE_L0S that includes both
upstream and downstream bits. Rename also the defines that are internal to
aspm.c to start with PCIE_LINK_STATE for consistency.
While the PCIE_LINK_STATE_L0S BIT(0) -> (BIT(0) | BIT(1)) transformation is
not 1:1, in practice aspm.c already used ASPM_STATE_L0S that has both bits
enabled except during mapping.
While at it, place the PCIE_LINK_STATE_CLKPM define last to have more
logical grouping.
Use static_assert() to ensure PCIE_LINK_STATE_L0S is strictly equal to the
combination of PCIE_LINK_STATE_L0S_UP/DW.
Link: https://lore.kernel.org/r/20240322123952.6384-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Is is reported that for dm-raid10, lvextend + lvchange --syncaction will
trigger following softlockup:
kernel:watchdog: BUG: soft lockup - CPU#3 stuck for 26s! [mdX_resync:6976]
CPU: 7 PID: 3588 Comm: mdX_resync Kdump: loaded Not tainted 6.9.0-rc4-next-20240419 #1
RIP: 0010:_raw_spin_unlock_irq+0x13/0x30
Call Trace:
<TASK>
md_bitmap_start_sync+0x6b/0xf0
raid10_sync_request+0x25c/0x1b40 [raid10]
md_do_sync+0x64b/0x1020
md_thread+0xa7/0x170
kthread+0xcf/0x100
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1a/0x30
And the detailed process is as follows:
md_do_sync
j = mddev->resync_min
while (j < max_sectors)
sectors = raid10_sync_request(mddev, j, &skipped)
if (!md_bitmap_start_sync(..., &sync_blocks))
// md_bitmap_start_sync set sync_blocks to 0
return sync_blocks + sectors_skippe;
// sectors = 0;
j += sectors;
// j never change
Root cause is that commit 301867b1c1 ("md/raid10: check
slab-out-of-bounds in md_bitmap_get_counter") return early from
md_bitmap_get_counter(), without setting returned blocks.
Fix this problem by always set returned blocks from
md_bitmap_get_counter"(), as it used to be.
Noted that this patch just fix the softlockup problem in kernel, the
case that bitmap size doesn't match array size still need to be fixed.
Fixes: 301867b1c1 ("md/raid10: check slab-out-of-bounds in md_bitmap_get_counter")
Reported-and-tested-by: Nigel Croxon <ncroxon@redhat.com>
Closes: https://lore.kernel.org/all/71ba5272-ab07-43ba-8232-d2da642acb4e@redhat.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240422065824.2516-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
This reverts commit 8a91b29f1f.
The regulator_disable() added by the original commit solves one kind of
regulator imbalance but adds another one as it allows the regulator to be
disabled one more time than it is enabled in the following scenario:
1. Start video pipeline -> sn65dsi83_atomic_pre_enable -> regulator_enable
2. PLL lock fails -> regulator_disable
3. Stop video pipeline -> sn65dsi83_atomic_disable -> regulator_disable
The reason is clear from the code flow, which looks like this (after
removing unrelated code):
static void sn65dsi83_atomic_pre_enable()
{
regulator_enable(ctx->vcc);
if (PLL failed locking) {
regulator_disable(ctx->vcc); <---- added by patch being reverted
return;
}
}
static void sn65dsi83_atomic_disable()
{
regulator_disable(ctx->vcc);
}
The use case for introducing the additional regulator_disable() was
removing the module for debugging (see link below for the discussion). If
the module is removed after a .atomic_pre_enable, i.e. with an active
pipeline from the DRM point of view, .atomic_disable is not called and thus
the regulator would not be disabled.
According to the discussion however there is no actual use case for
removing the module with an active pipeline, except for
debugging/development.
On the other hand, the occurrence of a PLL lock failure is possible due to
any physical reason (e.g. a temporary hardware failure for electrical
reasons) so handling it gracefully should be supported. As there is no way
for .atomic[_pre]_enable to report an error to the core, the only clean way
to support it is calling regulator_disabled() only in .atomic_disable,
unconditionally, as it was before.
Link: https://lore.kernel.org/all/15244220.uLZWGnKmhe@steina-w/
Fixes: 8a91b29f1f ("drm/bridge: ti-sn65dsi83: Fix enable error path")
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426122259.46808-1-luca.ceresoli@bootlin.com
(cherry picked from commit 2940ee03b2)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
btrfs_get_bdev_and_sb() has two callers - btrfs_open_one_device(),
which asks for open to be exclusive and btrfs_get_dev_args_from_path(),
which doesn't. Currently it does set_blocksize() in all cases.
I'm rather dubious about the need to do set_blocksize() anywhere in btrfs,
to be honest - there's some access to page cache of underlying block
devices in there, but it's nowhere near the hot paths, AFAICT.
In any case, btrfs_get_dev_args_from_path() only needs to read
the on-disk superblock and copy several fields out of it; all
callers are only interested in devices that are already opened
and brought into per-filesystem set, so setting the block size
is redundant for those and actively harmful if we are given
a pathname of unrelated device.
So we only need btrfs_get_bdev_and_sb() to call set_blocksize()
when it's asked to open exclusive.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
same as with the swap...
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
plane->state and plane->state->fb can be NULL, so add a check before
dereferencing them.
Found by testing with the imx driver.
Fixes: 879b3b6511 ("drm/fb_dma: Add generic get_scanout_buffer() for drm_panic")
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426121121.241366-1-jfalempe@redhat.com
(cherry picked from commit 986c12d8c9)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Framebuffer memory is allocated via vzalloc() from non-contiguous
physical pages. The physical framebuffer start address is therefore
meaningless. Do not set it.
The value is not used within the kernel and only exported to userspace
on dedicated ARM configs. No functional change is expected.
v2:
- refer to vzalloc() in commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a5b44c4adb ("drm/fbdev-generic: Always use shadow buffering")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Zack Rusin <zackr@vmware.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: <stable@vger.kernel.org> # v6.4+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-2-tzimmermann@suse.de
(cherry picked from commit 73ef0aecba)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
... eliminating the need to reopen block devices so they could be
exclusively held.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
once upon a time that used to matter; these days we do swap IO for
swap devices at the level that doesn't give a damn about block size,
buffer_head or anything of that sort - just attach the page to
bio, set the location and size (the latter to PAGE_SIZE) and feed
into queue.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
1) it doesn't make any sense to have ->open() call set_blocksize() on the
device being opened - the caller will override that anyway.
2) setting block size on underlying device, OTOH, ought to be done when
we are opening it exclusive - i.e. as part of pkt_open_dev(). Having
it done at setup time doesn't guarantee us anything about the state
at the time we start talking to it. Worse, if you happen to have
the underlying device containing e.g. ext2 with 4Kb blocks that
is currently mounted r/o, that set_blocksize() will confuse the hell
out of filesystem.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We are not using __bread() anymore and read_cache_page_gfp() doesn't
care about block size. Moreover, we should *not* change block
size on a device that is currently held exclusive - filesystems
that use buffer cache expect the block numbers to be interpreted
in units set by filesystem.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
ACKed-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We previously would call btrfs_check_leaf() if we had the check
integrity code enabled, which meant that we could only run the extended
leaf checks if we had WRITTEN set on the header flags.
This leaves a gap in our checking, because we could end up with
corruption on disk where WRITTEN isn't set on the leaf, and then the
extended leaf checks don't get run which we rely on to validate all of
the item pointers to make sure we don't access memory outside of the
extent buffer.
However, since 732fab95ab ("btrfs: check-integrity: remove
CONFIG_BTRFS_FS_CHECK_INTEGRITY option") we no longer call
btrfs_check_leaf() from btrfs_mark_buffer_dirty(), which means we only
ever call it on blocks that are being written out, and thus have WRITTEN
set, or that are being read in, which should have WRITTEN set.
Add checks to make sure we have WRITTEN set appropriately, and then make
sure __btrfs_check_leaf() always does the item checking. This will
protect us from file systems that have been corrupted and no longer have
WRITTEN set on some of the blocks.
This was hit on a crafted image tweaking the WRITTEN bit and reported by
KASAN as out-of-bound access in the eb accessors. The example is a dir
item at the end of an eb.
[2.042] BTRFS warning (device loop1): bad eb member start: ptr 0x3fff start 30572544 member offset 16410 size 2
[2.040] general protection fault, probably for non-canonical address 0xe0009d1000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI
[2.537] KASAN: maybe wild-memory-access in range [0x0005088000000018-0x000508800000001f]
[2.729] CPU: 0 PID: 2587 Comm: mount Not tainted 6.8.2 #1
[2.729] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[2.621] RIP: 0010:btrfs_get_16+0x34b/0x6d0
[2.621] RSP: 0018:ffff88810871fab8 EFLAGS: 00000206
[2.621] RAX: 0000a11000000003 RBX: ffff888104ff8720 RCX: ffff88811b2288c0
[2.621] RDX: dffffc0000000000 RSI: ffffffff81dd8aca RDI: ffff88810871f748
[2.621] RBP: 000000000000401a R08: 0000000000000001 R09: ffffed10210e3ee9
[2.621] R10: ffff88810871f74f R11: 205d323430333737 R12: 000000000000001a
[2.621] R13: 000508800000001a R14: 1ffff110210e3f5d R15: ffffffff850011e8
[2.621] FS: 00007f56ea275840(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000
[2.621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[2.621] CR2: 00007febd13b75c0 CR3: 000000010bb50000 CR4: 00000000000006f0
[2.621] Call Trace:
[2.621] <TASK>
[2.621] ? show_regs+0x74/0x80
[2.621] ? die_addr+0x46/0xc0
[2.621] ? exc_general_protection+0x161/0x2a0
[2.621] ? asm_exc_general_protection+0x26/0x30
[2.621] ? btrfs_get_16+0x33a/0x6d0
[2.621] ? btrfs_get_16+0x34b/0x6d0
[2.621] ? btrfs_get_16+0x33a/0x6d0
[2.621] ? __pfx_btrfs_get_16+0x10/0x10
[2.621] ? __pfx_mutex_unlock+0x10/0x10
[2.621] btrfs_match_dir_item_name+0x101/0x1a0
[2.621] btrfs_lookup_dir_item+0x1f3/0x280
[2.621] ? __pfx_btrfs_lookup_dir_item+0x10/0x10
[2.621] btrfs_get_tree+0xd25/0x1910
Reported-by: lei lu <llfamsec@gmail.com>
CC: stable@vger.kernel.org # 6.7+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copy more details from report ]
Signed-off-by: David Sterba <dsterba@suse.com>
David Hildenbrand says:
===================
This series fixes one issue with uffd + shared zeropages on s390x and
fixes that "ordinary" KVM guests can make use of shared zeropages again.
userfaultfd could currently end up mapping shared zeropages into processes
that forbid shared zeropages. This only apples to s390x, relevant for
handling PV guests and guests that use storage kets correctly. Fix it
by placing a zeroed folio instead of the shared zeropage during
UFFDIO_ZEROPAGE instead.
I stumbled over this issue while looking into a customer scenario that
is using:
(1) Memory ballooning for dynamic resizing. Start a VM with, say, 100 GiB
and inflate the balloon during boot to 60 GiB. The VM has ~40 GiB
available and additional memory can be "fake hotplugged" to the VM
later on demand by deflating the balloon. Actual memory overcommit is
not desired, so physical memory would only be moved between VMs.
(2) Live migration of VMs between sites to evacuate servers in case of
emergency.
Without the shared zeropage, during (2), the VM would suddenly consume
100 GiB on the migration source and destination. On the migration source,
where we don't excpect memory overcommit, we could easilt end up crashing
the VM during migration.
Independent of that, memory handed back to the hypervisor using "free page
reporting" would end up consuming actual memory after the migration on the
destination, not getting freed up until reused+freed again.
While there might be ways to optimize parts of this in QEMU, we really
should just support the shared zeropage again for ordinary VMs.
We only expect legcy guests to make use of storage keys, so let's handle
zeropages again when enabling storage keys or when enabling PV. To not
break userfaultfd like we did in the past, don't zap the shared zeropages,
but instead trigger unsharing faults, just like we do for unsharing
KSM pages in break_ksm().
Unsharing faults will simply replace the shared zeropage by a zeroed
anonymous folio. We can already trigger the same fault path using GUP,
when trying to long-term pin a shared zeropage, but also when unmerging
a KSM-placed zeropages, so this is nothing new.
Patch #1 tested on 86-64 by forcing mm_forbids_zeropage() to be 1, and
running the uffd selftests.
Patch #2 tested on s390x: the live migration scenario now works as
expected, and kvm-unit-tests that trigger usage of skeys work well, whereby
I can see detection and unsharing of shared zeropages.
Further (as broken in v2), I tested that the shared zeropage is no
longer populated after skeys are used -- that mm_forbids_zeropage() works
as expected:
./s390x-run s390x/skey.elf \
-no-shutdown \
-chardev socket,id=monitor,path=/var/tmp/mon,server,nowait \
-mon chardev=monitor,mode=readline
Then, in another shell:
# cat /proc/`pgrep qemu`/smaps_rollup | grep Rss
Rss: 31484 kB
# echo "dump-guest-memory tmp" | sudo nc -U /var/tmp/mon
...
# cat /proc/`pgrep qemu`/smaps_rollup | grep Rss
Rss: 160452 kB
-> Reading guest memory does not populate the shared zeropage
Doing the same with selftest.elf (no skeys)
# cat /proc/`pgrep qemu`/smaps_rollup | grep Rss
Rss: 30900 kB
# echo "dump-guest-memory tmp" | sudo nc -U /var/tmp/mon
...
# cat /proc/`pgrep qemu`/smaps_rollup | grep Rsstmp/mon
Rss: 30924 kB
-> Reading guest memory does populate the shared zeropage
===================
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
I found that the debug build was a slowed down a lot by the maps lock
code since it checks the invariants whenever it gets the pointer to the
lock. This means it checks twice the invariants before and after the
access.
Instead, let's move the checking code within the lock area but after any
modification and remove it from the read paths. This would remove (more
than) half of the maps lock overhead.
The time for perf report with a huge data file (200k+ of MMAP2 events).
Non-debug Before After
--------- -------- --------
2m 43s 6m 45s 4m 21s
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240429225738.1491791-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[BUG]
After kernel commit 86211eea8a ("btrfs: qgroup: validate
btrfs_qgroup_inherit parameter"), user space tool snapper will fail to
create snapshot using its timeline feature.
[CAUSE]
It turns out that, if using timeline snapper would unconditionally pass
btrfs_qgroup_inherit parameter (assigning the new snapshot to qgroup 1/0)
for snapshot creation.
In that case, since qgroup is disabled there would be no qgroup 1/0, and
btrfs_qgroup_check_inherit() would return -ENOENT and fail the whole
snapshot creation.
[FIX]
Just skip the check if qgroup is not enabled.
This is to keep the older behavior for user space tools, as if the
kernel behavior changed for user space, it is a regression of kernel.
Thankfully snapper is also fixing the behavior by detecting if qgroup is
running in the first place, so the effect should not be that huge.
Link: https://github.com/openSUSE/snapper/issues/894
Fixes: 86211eea8a ("btrfs: qgroup: validate btrfs_qgroup_inherit parameter")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new sysfs path ioctl lets us get the /sys/fs/ path for a given
filesystem in a fs agnostic way, potentially nudging us towards
standarizing some of our reporting.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: linux-ext4@vger.kernel.org
Link: https://lore.kernel.org/r/20240315035308.3563511-4-kent.overstreet@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 54ce1927eb ("cxl/cper: Fix errant CPER prints for CXL events")
moved the CXL CPER section defines to include/linux/cper.h from ghes.c
When the latest cxl/cper series was reworked those defines were kept in
ghes.c by accident. Thus they were duplicated.
Delete the duplicate defines keeping them in the header to be shared
between efi and apei.
Suggested-by: Fabio M. De Francesco <fabio.maria.de.francesco@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20240502-cper-fix-dup-guid-v1-1-283cc447c7bf@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
If ACPI_APEI_GHES is not configured the [un]register work functions are
not properly declared.
0day notices that the cxl_cper_register_work() declaration in the
CONFIG_ACPI_APEI_GHES=n is broken, fix it to be typical nop stub.
Reported-by: kernel test robot <lkp@intel.com>
Closes: http://lore.kernel.org/r/202405012230.6kXItWen-lkp@intel.com
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20240501-cper-fix-0day-v1-1-c0b0056eafbc@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
This patch lays out a set of SYSCALL programs that can be used to invoke
the socket operation kfuncs in bpf_testmod, allowing a test program to
manipulate kernel socket operations from userspace.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-4-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch adds a set of kfuncs to bpf_testmod that can be used to
manipulate a socket from kernel space.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-3-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Without this fix, the bind4 and bind6 programs will reject bind attempts
on big endian systems. This patch ensures that CI tests pass for the
s390x architecture.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20240429214529.2644801-2-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a ("bpf: verifier: prevent userspace memory access")
d503a04f8b ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A user with minimum journal size (1024 blocks these days) complained
about the following error triggered by generic/697 test in
ext4_tmpfile():
run fstests generic/697 at 2024-02-28 05:34:46
JBD2: vfstest wants too many credits credits:260 rsv_credits:0 max:256
EXT4-fs error (device loop0) in __ext4_new_inode:1083: error 28
Indeed the credit estimate in ext4_tmpfile() is huge.
EXT4_MAXQUOTAS_INIT_BLOCKS() is 219, then 10 credits from ext4_tmpfile()
itself and then ext4_xattr_credits_for_new_inode() adds more credits
needed for security attributes and ACLs. Now the
EXT4_MAXQUOTAS_INIT_BLOCKS() is in fact unnecessary because we've
already initialized quotas with dquot_init() shortly before and so
EXT4_MAXQUOTAS_TRANS_BLOCKS() is enough (which boils down to 3 credits).
Fixes: af51a2ac36 ("ext4: ->tmpfile() support")
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Luis Henriques <lhenriques@suse.de>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Link: https://lore.kernel.org/r/20240307115320.28949-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the post_reset function, if the fast reset didn't succeed, we
are not clearing the fast_reset flag, which prevents firmware
sections from being reloaded. While at it, use panthor_fw_stop()
instead of manually writing DISABLE to the MCU_CONTROL register.
Fixes: 2718d91816 ("drm/panthor: Add the FW logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430113727.493155-1-boris.brezillon@collabora.com
This is already done by vfs_prepare_mode() when creating the upper object
by vfs_create(), vfs_mkdir() and vfs_mknod().
No regressions have been observed in xfstests run with posix acls turned
off for the upper filesystem.
Fixes: 1639a49ccd ("fs: move S_ISGID stripping into the vfs_*() helpers")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Combine inode creation with opening a file.
There are six separate objects that are being set up: the backing inode,
dentry and file, and the overlay inode, dentry and file. Cleanup in case
of an error is a bit of a challenge and is difficult to test, so careful
review is needed.
All tmpfile testcases except generic/509 now run/pass, and no regressions
are observed with full xfstests.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
If, when waiting for a transmit to finish, the wait is interrupted,
then you might get a "transmit timed out" message, even though the
transmit was interrupted and did not actually time out.
Set transmit_in_progress_aborted to true if the
wait_for_completion_killable() call was interrupted and ensure
that the transmit is properly marked as ABORTED.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Yang, Chenyuan <cy54@illinois.edu>
Closes: https://lore.kernel.org/linux-media/PH7PR11MB57688E64ADE4FE82E658D86DA09EA@PH7PR11MB5768.namprd11.prod.outlook.com/
Fixes: 590a8e564c ("media: cec: abort if the current transmit was canceled")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Keep track if cec_claim_log_addrs() is running, and return -EBUSY
if it is when calling CEC_ADAP_S_LOG_ADDRS.
This prevents a case where cec_claim_log_addrs() could be called
while it was still in progress.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Yang, Chenyuan <cy54@illinois.edu>
Closes: https://lore.kernel.org/linux-media/PH7PR11MB57688E64ADE4FE82E658D86DA09EA@PH7PR11MB5768.namprd11.prod.outlook.com/
Fixes: ca684386e6 ("[media] cec: add HDMI CEC framework (api)")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zEs6
-----END PGP SIGNATURE-----
Merge tag 'for-6.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- set correct ram_bytes when splitting ordered extent. This can be
inconsistent on-disk but harmless as it's not used for calculations
and it's only advisory for compression
- fix lockdep splat when taking cleaner mutex in qgroups disable ioctl
- fix missing mutex unlock on error path when looking up sys chunk for
relocation
* tag 'for-6.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: set correct ram_bytes when splitting ordered extent
btrfs: take the cleaner_mutex earlier in qgroup disable
btrfs: add missing mutex_unlock in btrfs_relocate_sys_chunks()
- The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. Fix the callers
that provide the last byte within the range instead.
- 3270 Channel Command Word (CCW) may contain zero data address in case
there is no data in the request. Add data availability check to avoid
erroneous non-zero value as result of virt_to_dma32(NULL) application
in cases there is no data
- Add missing CFI directives for an unwinder to restore the return
address in the vDSO assembler code
- NUL-terminate kernel buffer when duplicating user space memory region
on Channel IO (CIO) debugfs write inject
- Fix wrong format string in zcrypt debug output
- Return -EBUSY code when a CCA card is temporarily unavailabile
- Restore a loop that retries derivation of a protected key from a
secure key in cases the low level reports temporarily unavailability
with -EBUSY code
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZjO8UhccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8C4cAQCgIOVXwXWum7VMG+2jfnR14mIb
oVfiySCUevlKOZXTwgEAuZsEvYgb73YEODnCZrg2lUETfrPeG0Mm6C1L15ev9AE=
=oRdp
-----END PGP SIGNATURE-----
Merge tag 's390-6.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. Fix the callers
that provide the last byte within the range instead.
- 3270 Channel Command Word (CCW) may contain zero data address in case
there is no data in the request. Add data availability check to avoid
erroneous non-zero value as result of virt_to_dma32(NULL) application
in cases there is no data
- Add missing CFI directives for an unwinder to restore the return
address in the vDSO assembler code
- NUL-terminate kernel buffer when duplicating user space memory region
on Channel IO (CIO) debugfs write inject
- Fix wrong format string in zcrypt debug output
- Return -EBUSY code when a CCA card is temporarily unavailabile
- Restore a loop that retries derivation of a protected key from a
secure key in cases the low level reports temporarily unavailability
with -EBUSY code
* tag 's390-6.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/paes: Reestablish retry loop in paes
s390/zcrypt: Use EBUSY to indicate temp unavailability
s390/zcrypt: Handle ep11 cprb return code
s390/zcrypt: Fix wrong format string in debug feature printout
s390/cio: Ensure the copied buf is NUL terminated
s390/vdso: Add CFI for RA register to asm macro vdso_func
s390/3270: Fix buffer assignment
s390/mm: Fix clearing storage keys for huge pages
s390/mm: Fix storage key clearing for guest huge pages
Use submit_bio_wait() instead of hand-rolling our own synchronous
wait. Also allocate the BIO on the stack since we're not deep in
the call stack at this point.
There's no need to kmap the page, since it isn't allocated from HIGHMEM.
Turn the GFP_NOFS allocation into GFP_KERNEL; if the page allocator
enters reclaim, we cannot be called as the filesystem has not yet been
initialised and so has no pages to reclaim.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
With recent sanity checks for topology information added, there are now
warnings issued for APs when running as a Xen PV guest:
[Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0001
This is due to the initial APIC ID obtained via CPUID for PV guests is
always 0.
Avoid the warnings by synthesizing the CPUID data to contain the same
initial APIC ID as xen_pv_smp_config() is using for registering the
APIC IDs of all CPUs.
Fixes: 52128a7a21 ("86/cpu/topology: Make the APIC mismatch warnings complete")
Signed-off-by: Juergen Gross <jgross@suse.com>
In 'struct mt6370_priv', the 'reg_cfgs' field is unused. Moreover
'struct reg_cfg' isn't defined anywhere, so remove it.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/e389be5e1012dc05fc2641123883ca3b0747525a.1714328839.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
match_string() returns the array index of a matching string.
Use it instead of the open-coded implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240426152515.872917-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
