The x86 instruction decoder is used not only for decoding kernel
instructions. It is also used by perf uprobes (user space probes) and by
perf tools Intel Processor Trace decoding. Consequently, it needs to
support instructions executed by user space also.
Add instructions documented in Intel Architecture Instruction Set
Extensions and Future Features Programming Reference March 2024
319433-052, that have not been added yet:
AADD
AAND
AOR
AXOR
CMPccXADD
PBNDKB
RDMSRLIST
URDMSR
UWRMSR
VBCSTNEBF162PS
VBCSTNESH2PS
VCVTNEEBF162PS
VCVTNEEPH2PS
VCVTNEOBF162PS
VCVTNEOPH2PS
VCVTNEPS2BF16
VPDPB[SU,UU,SS]D[,S]
VPDPW[SU,US,UU]D[,S]
VPMADD52HUQ
VPMADD52LUQ
VSHA512MSG1
VSHA512MSG2
VSHA512RNDS2
VSM3MSG1
VSM3MSG2
VSM3RNDS2
VSM4KEY4
VSM4RNDS4
WRMSRLIST
TCMMIMFP16PS
TCMMRLFP16PS
TDPFP16PS
PREFETCHIT1
PREFETCHIT0
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-5-adrian.hunter@intel.com
The x86 instruction decoder is used not only for decoding kernel
instructions. It is also used by perf uprobes (user space probes) and by
perf tools Intel Processor Trace decoding. Consequently, it needs to
support instructions executed by user space also.
Intel Architecture Instruction Set Extensions and Future Features manual
number 319433-044 of May 2021, documented VEX versions of instructions
VPDPBUSD, VPDPBUSDS, VPDPWSSD and VPDPWSSDS, but the opcode map has them
listed as EVEX only.
Remove EVEX-only (ev) annotation from instructions VPDPBUSD, VPDPBUSDS,
VPDPWSSD and VPDPWSSDS, which allows them to be decoded with either a VEX
or EVEX prefix.
Fixes: 0153d98f2d ("x86/insn: Add misc instructions to x86 instruction decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-4-adrian.hunter@intel.com
The x86 instruction decoder is used not only for decoding kernel
instructions. It is also used by perf uprobes (user space probes) and by
perf tools Intel Processor Trace decoding. Consequently, it needs to
support instructions executed by user space also.
Opcode 0x68 PUSH instruction is currently defined as 64-bit operand size
only i.e. (d64). That was based on Intel SDM Opcode Map. However that is
contradicted by the Instruction Set Reference section for PUSH in the
same manual.
Remove 64-bit operand size only annotation from opcode 0x68 PUSH
instruction.
Example:
$ cat pushw.s
.global _start
.text
_start:
pushw $0x1234
mov $0x1,%eax # system call number (sys_exit)
int $0x80
$ as -o pushw.o pushw.s
$ ld -s -o pushw pushw.o
$ objdump -d pushw | tail -4
0000000000401000 <.text>:
401000: 66 68 34 12 pushw $0x1234
401004: b8 01 00 00 00 mov $0x1,%eax
401009: cd 80 int $0x80
$ perf record -e intel_pt//u ./pushw
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB perf.data ]
Before:
$ perf script --insn-trace=disasm
Warning:
1 instruction trace errors
pushw 10349 [000] 10586.869237014: 401000 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) pushw $0x1234
pushw 10349 [000] 10586.869237014: 401006 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb %al, (%rax)
pushw 10349 [000] 10586.869237014: 401008 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb %cl, %ch
pushw 10349 [000] 10586.869237014: 40100a [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb $0x2e, (%rax)
instruction trace error type 1 time 10586.869237224 cpu 0 pid 10349 tid 10349 ip 0x40100d code 6: Trace doesn't match instruction
After:
$ perf script --insn-trace=disasm
pushw 10349 [000] 10586.869237014: 401000 [unknown] (./pushw) pushw $0x1234
pushw 10349 [000] 10586.869237014: 401004 [unknown] (./pushw) movl $1, %eax
Fixes: eb13296cfa ("x86: Instruction decoder API")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-3-adrian.hunter@intel.com
The x86 instruction decoder needs to know these new instructions that
are going to be used in the crypto library as well as the x86 core
code. Add the following:
LOADIWKEY:
Load a CPU-internal wrapping key.
ENCODEKEY128:
Wrap a 128-bit AES key to a key handle.
ENCODEKEY256:
Wrap a 256-bit AES key to a key handle.
AESENC128KL:
Encrypt a 128-bit block of data using a 128-bit AES key
indicated by a key handle.
AESENC256KL:
Encrypt a 128-bit block of data using a 256-bit AES key
indicated by a key handle.
AESDEC128KL:
Decrypt a 128-bit block of data using a 128-bit AES key
indicated by a key handle.
AESDEC256KL:
Decrypt a 128-bit block of data using a 256-bit AES key
indicated by a key handle.
AESENCWIDE128KL:
Encrypt 8 128-bit blocks of data using a 128-bit AES key
indicated by a key handle.
AESENCWIDE256KL:
Encrypt 8 128-bit blocks of data using a 256-bit AES key
indicated by a key handle.
AESDECWIDE128KL:
Decrypt 8 128-bit blocks of data using a 128-bit AES key
indicated by a key handle.
AESDECWIDE256KL:
Decrypt 8 128-bit blocks of data using a 256-bit AES key
indicated by a key handle.
The detail can be found in Intel Software Developer Manual.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240502105853.5338-2-adrian.hunter@intel.com
There is an issue in clang's ThinLTO caching (enabled for the kernel via
'--thinlto-cache-dir') with .incbin, which the kernel occasionally uses
to include data within the kernel, such as the .config file for
/proc/config.gz. For example, when changing the .config and rebuilding
vmlinux, the copy of .config in vmlinux does not match the copy of
.config in the build folder:
$ echo 'CONFIG_LTO_NONE=n
CONFIG_LTO_CLANG_THIN=y
CONFIG_IKCONFIG=y
CONFIG_HEADERS_INSTALL=y' >kernel/configs/repro.config
$ make -skj"$(nproc)" ARCH=x86_64 LLVM=1 clean defconfig repro.config vmlinux
...
$ grep CONFIG_HEADERS_INSTALL .config
CONFIG_HEADERS_INSTALL=y
$ scripts/extract-ikconfig vmlinux | grep CONFIG_HEADERS_INSTALL
CONFIG_HEADERS_INSTALL=y
$ scripts/config -d HEADERS_INSTALL
$ make -kj"$(nproc)" ARCH=x86_64 LLVM=1 vmlinux
...
UPD kernel/config_data
GZIP kernel/config_data.gz
CC kernel/configs.o
...
LD vmlinux
...
$ grep CONFIG_HEADERS_INSTALL .config
# CONFIG_HEADERS_INSTALL is not set
$ scripts/extract-ikconfig vmlinux | grep CONFIG_HEADERS_INSTALL
CONFIG_HEADERS_INSTALL=y
Without '--thinlto-cache-dir' or when using full LTO, this issue does
not occur.
Benchmarking incremental builds on a few different machines with and
without the cache shows a 20% increase in incremental build time without
the cache when measured by touching init/main.c and running 'make all'.
ARCH=arm64 defconfig + CONFIG_LTO_CLANG_THIN=y on an arm64 host:
Benchmark 1: With ThinLTO cache
Time (mean ± σ): 56.347 s ± 0.163 s [User: 83.768 s, System: 24.661 s]
Range (min … max): 56.109 s … 56.594 s 10 runs
Benchmark 2: Without ThinLTO cache
Time (mean ± σ): 67.740 s ± 0.479 s [User: 718.458 s, System: 31.797 s]
Range (min … max): 67.059 s … 68.556 s 10 runs
Summary
With ThinLTO cache ran
1.20 ± 0.01 times faster than Without ThinLTO cache
ARCH=x86_64 defconfig + CONFIG_LTO_CLANG_THIN=y on an x86_64 host:
Benchmark 1: With ThinLTO cache
Time (mean ± σ): 85.772 s ± 0.252 s [User: 91.505 s, System: 8.408 s]
Range (min … max): 85.447 s … 86.244 s 10 runs
Benchmark 2: Without ThinLTO cache
Time (mean ± σ): 103.833 s ± 0.288 s [User: 232.058 s, System: 8.569 s]
Range (min … max): 103.286 s … 104.124 s 10 runs
Summary
With ThinLTO cache ran
1.21 ± 0.00 times faster than Without ThinLTO cache
While it is unfortunate to take this performance improvement off the
table, correctness is more important. If/when this is fixed in LLVM, it
can potentially be brought back in a conditional manner. Alternatively,
a developer can just disable LTO if doing incremental compiles quickly
is important, as a full compile cycle can still take over a minute even
with the cache and it is unlikely that LTO will result in functional
differences for a kernel change.
Cc: stable@vger.kernel.org
Fixes: dc5723b02e ("kbuild: add support for Clang LTO")
Reported-by: Yifan Hong <elsk@google.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2021
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Closes: https://lore.kernel.org/r/20220327115526.cc4b0ff55fc53c97683c3e4d@kernel.org/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The 'choice' statement is primarily used to exclusively select one
option, but the 'optional' property allows all entries to be disabled.
In the following example, both A and B can be disabled simultaneously:
choice
prompt "choose A, B, or nothing"
optional
config A
bool "A"
config B
bool "B"
endchoice
You can achieve the equivalent outcome by other means.
A common solution is to add another option to guard the choice block.
In the following example, you can set ENABLE_A_B_CHOICE=n to disable
the entire choice block:
choice
prompt "choose A or B"
depends on ENABLE_A_B_CHOICE
config A
bool "A"
config B
bool "B"
endchoice
Another approach is to insert one more entry:
choice
prompt "choose A, B, or disable both"
config A
bool "A"
config B
bool "B"
config DISABLE_A_AND_B
bool "choose this to disable both A and B"
endchoice
Some real examples are DEBUG_INFO_NONE, INITRAMFS_COMPRESSION_NONE,
LTO_NONE, etc.
The 'optional' property is even more unnecessary for a tristate choice.
Without the 'optional' property, you can disable A and B; you can set
'm' in the choice prompt, and disable A and B individually:
choice
prompt "choose one built-in or make them modular"
config A
tristate "A"
config B
tristate "B"
endchoice
In conclusion, the 'optional' property was unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
The 'choice' statement is primarily used to exclusively select one
option, but the 'optional' property allows all entries to be disabled.
This feature is rarely used. In fact, it is only used in arch/sh/Kconfig
because the equivalent outcome can be achieved by inserting one more
entry.
The 'optional' property support will be removed from Kconfig.
This commit replaces the 'optional' property with a dummy option,
CMDLINE_FROM_BOOTLOADER, as seen in some other architectures.
Note:
The 'default CMDLINE_OVERWRITE' statement does not work as intended
in combination with 'optional'. If neither CONFIG_CMDLINE_OVERWRITE
nor CONFIG_CMDLINE_EXTEND is specified in a defconfig file, both of
them are disabled. This is a bug. To maintain the current behavior,
I added CONFIG_CMDLINE_FROM_BOOTLOADER=y to those defconfig files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
All symbols except choices have a name.
Previously, choices were allowed to have a name, but commit c83f020973
("kconfig: remove named choice support") eliminated that possibility.
Now, it is easy to distinguish choices from normal symbols; if the name
is NULL, it is a choice.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Given KBUILD_IMAGE properly set in arch/*/Makefile, the default case
should work in most scenarios. The only oddity is the naming of the
copy destination, vmlinux-kbuild-${KERNELRELEASE}. Let's rename it
to vmlinuz-${KERNELRELEASE} because the kernel is often compressed.
Remove the warning to avoid unnecessary patch submissions when the
default case suffices.
Remove the x86 case, which is now equivalent to the default.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
All symbols except choices have a name.
child->sym->name never becomes NULL inside choice blocks.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use menu_for_each_entry() to traverse the menu tree instead of
implementing similar logic in each function.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Several functions require traversing menu entries sequentially. This
commit introduces some helpers to simplify such operations.
The menu_next() function facilitates depth-first traversal:
1. Descend to the child level if the current menu has one
2. Move to the next sibling at the same level if available
3. Ascend to the parent level if there is no more child or sibling
The menu_for_each_sub_entry() macro iterates over all submenu entries
using depth-first traverse.
The menu_for_each_entry() macro is the same, but over all menu entries.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Weak references are references that are permitted to remain unsatisfied
in the final link. This means they cannot be implemented using place
relative relocations, resulting in GOT entries when using position
independent code generation.
The notes section should always exist, so the weak annotations can be
omitted.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
kallsyms is a directory of all the symbols in the vmlinux binary, and so
creating it is somewhat of a chicken-and-egg problem, as its non-zero
size affects the layout of the binary, and therefore the values of the
symbols.
For this reason, the kernel is linked more than once, and the first pass
does not include any kallsyms data at all. For the linker to accept
this, the symbol declarations describing the kallsyms metadata are
emitted as having weak linkage, so they can remain unsatisfied. During
the subsequent passes, the weak references are satisfied by the kallsyms
metadata that was constructed based on information gathered from the
preceding passes.
Weak references lead to somewhat worse codegen, because taking their
address may need to produce NULL (if the reference was unsatisfied), and
this is not usually supported by RIP or PC relative symbol references.
Given that these references are ultimately always satisfied in the final
link, let's drop the weak annotation, and instead, provide fallback
definitions in the linker script that are only emitted if an unsatisfied
reference exists.
While at it, drop the FRV specific annotation that these symbols reside
in .rodata - FRV is long gone.
Tested-by: Nick Desaulniers <ndesaulniers@google.com> # Boot
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20230504174320.3930345-1-ardb%40kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/package/buildtar checks some kernel packages, and copies the
first image found. This may potentially produce an inconsistent (and
possibly wrong) package.
For instance, the for-loop for arm64 checks Image.{bz2,gz,lz4,lzma,lzo},
and vmlinuz.efi, then copies the first image found, which might be a
stale image created in a previous build.
When CONFIG_EFI_ZBOOT is enabled in the pristine source tree,
'make ARCH=arm64 tar-pkg' will build and copy vmlinuz.efi. This is the
expected behavior.
If you build the kernel with CONFIG_EFI_ZBOOT disabled, Image.gz will
be created, which will remain in the tree until you run 'make clean'.
Even if CONFIG_EFI_ZBOOT is turned on later, 'make ARCH=arm64 tar-pkg'
will copy stale Image.gz instead of the latest vmlinuz.efi, as Image.gz
takes precedence over vmlinuz.efi.
In summary, the code "[ -f ... ] && cp" does not consistently produce
the desired outcome.
Other packaging targets are deterministic; deb-pkg and rpm-pkg copies
${KBUILD_IMAGE}, which is determined by CONFIG options.
I removed [ -f ... ] checks from x86, alpha, parisc, and the default
because they have a single kernel image to copy. If it is missing, it
should be an error.
I did not modify the code for mips, arm64, riscv. Instead, I left some
comments. Eventually, someone may fix the code, or at the very least,
it may discourage the copy-pasting of incorrect code to another
architecture.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Running dtbs_check and dt_compatible_check targets really only depend
on processed-schema.json, but the dependency is 'dt_binding_check'. That
was sort worked around with the CHECK_DT_BINDING variable in order to
skip some of the work that 'dt_binding_check' does. It still runs the
full checks of the schemas which is not necessary and adds 10s of
seconds to the build time. That's significant when checking only a few
DTBs and with recent changes that have improved the validation time by
6-7x.
Add a new target, dt_binding_schema, which just builds
processed-schema.json and can be used as the dependency for other
targets. The scripts_dtc dependency isn't needed either as the examples
aren't built for it.
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add IEEE80211_RADIOTAP_EHT and IEEE80211_RADIOTAP_EHT_USIG radiotap
to fill in EHT information, such as MCS, NSS, GI and bandwidth.
Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce wifi LED switch control, add flow to Control a wifi
gpio pin based on the status of WIFI radio, if the pin is connected
to an LED, the LED will indicate the status of the WiFi radio.
Signed-off-by: Hao Zhang <hao.zhang@mediatek.com>
Co-developed-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The firmware support for management frame protection has limitations:
- do not support cipher BIP-GMAC-128 and BIP-GMAC-256
- support cipher BIP-CMAC-128 and BIP-CMAC-256, except action frame with
action type 'not robust'.
Therefore, to simplify the logic, do not set the IGTK to firmware and
let the encryption of management frames be handled by upper layer.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The implementation amounts to setting the driver flag
IEEE80211_VIF_SUPPORTS_CQM_RSSI, and then providing
mechanisms for continuously updating enough information
to be able to provide notifications to userspace when
RSSI drops below a certain threshold
Signed-off-by: Rong Yan <rong.yan@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This is expected by the firmware of older chipsets as well, though it may
not have been as strongly required as on mt799x
Fixes: 098428c400 ("wifi: mt76: connac: set correct muar_idx for mt799x chipsets")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Check if background radar is enabled or not before manually triggering it,
and also add more checks in radar detected event.
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For mt7992 chipsets, critical packet mode should be properly configured
to let the HW SDO module correctly fill the AC queue in TX descriptors of
some higher priority packets such as ARP and ICMP.
Without this patch, HW queues may hang when running MU traffic.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Without this commit, reading chip temperature will cause memory leakage.
Fixes: 6879b2e941 ("wifi: mt76: mt7996: add thermal sensor device support")
Reported-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Do not add UNI_BSS_INFO_11V_MBSSID tag when bssid_indicator is not set
to avoid abnormal beaconing behavior in non-11v MBSS scenario.
Signed-off-by: Henry Yen <henry.yen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For mt7996 chipsets, the HW CSO module can help to identify TCP traffic,
which assists the firmware in adjusting algorithms to improve overall
performance.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set RCPI values in mt7996_mcu_sta_rate_ctrl_tlv(), which can make the
FW rate control algorithm be initialized with a better MCS selection
table.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set peer address and aid for the BMC wtbl of station interface. For some
functions such as parsing MU_EDCA parameters from beacon, firmware will
need the peer address to do correct parsing.
Without this patch, MU uplink traffic would get suffered.
Reported-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When a BMC wtbl of station interface is correctly set with peer address,
HW will do rx header translation for broadcast data packets, which makes
mac80211 unable to find the corresponding ieee80211_sta and drop the
packets. To fix this, disable HW rx header translation for BMC entry.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Looks like this was missed in the initial patch that made
the conversion to the emulated chanctx drivers.
Fixes: 0a44dfc070 ("wifi: mac80211: simplify non-chanctx drivers")
Tested-by: James Courtier-Dutton <james.dutton@gmail.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Even if it is not a real issue at the moment since concurrent access to
mcu message queue is protected by mcu mutex, make the code more robust
and move mcu queue free space check inside queue spinlock critical section.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set intr1 to 0 in mt7996_irq_tasklet() in order to avoid possible
uninitialized variable usage if wed is not active for hif2.
Fixes: 83eafc9251 ("wifi: mt76: mt7996: add wed tx support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Before sending suspend & wow command to FW, its length should be
4-bytes alignd.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
During chip recovery (e.g. chip reset), there is a possible situation that
kernel worker reset_work is holding the lock and waiting for kernel thread
stat_worker to be parked, while stat_worker is waiting for the release of
the same lock.
It causes a deadlock resulting in the dumping of hung tasks messages and
possible rebooting of the device.
This patch prevents the execution of stat_worker during the chip recovery.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <MingYen.Hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7920e is a mt7921 series chipset with 802.11ax 2x2:2SS support.
The major difference is in firmware side only, at this moment.
This patch would add some mandatory changes for new chip id and
firmware download control.
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fixes issues with scanning and low power output at some rates.
Fixes: f75e4779d2 ("wifi: mt76: mt7996: add txpower setting support")
Signed-off-by: Chad Monroe <chad@monroe.io>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The wcid can be NULL. It should be checked for validity before
dereferencing it to avoid crash.
Fixes: 098428c400 ("wifi: mt76: connac: set correct muar_idx for mt799x chipsets")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This flag is needed for the PSE client reset. Fixes watchdog reset issues.
Fixes: c677dda165 ("wifi: mt76: mt7603: improve watchdog reset reliablity")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use the correct WMM AC queue instead of the MGMT one to fix potential issues
with aggregation sequence number tracking. Drop non-bufferable packets.
Fixes: fca9615f1a ("mt76: mt7603: fix up hardware queue index for PS filtered packets")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When pre-calibration data is missing, do not fail the driver probe.
Instead, just print a warning and fall back to regular calibration.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add pre-calibration for mt7986 and mt7916. It has different data size
with mt7915. Group cal needs 54k and 94k for 2G + 5G and 2G + 6G,
respectively. DPD cal needs 300k.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Send an update to the MCU whenever the settings change
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set correct beamformer capabilities for station vif in HE PHY
capabilities IE.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
