Commit graph

561,967 commits

Author SHA1 Message Date
Takashi Iwai
d2c6b63df5 ALSA: hda - Make some helper functions local
A few helper functions to convert the pin information to strings have
been exported with assumption that they were used by other drivers.
But they are referred only in the proc interface in the end.

Let's make them local so that we can get rid of a few exports.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-08-17 15:10:15 +02:00
Herbert Xu
dd43c4e92f crypto: null - Add missing Kconfig tristate for NULL2
This patch adds a missing tristate statement to Kconfig for the
new CRYPTO_NULL2 option.

Fixes: 149a39717d ("crypto: aead - Add type-safe geniv init/exit helpers")
Reported-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 21:02:39 +08:00
Joerg Roedel
54e466fde4 iommu/tegra-smmu: Changes for v4.3-rc1
A bunch of improvements by Russell King, along with a fix to restore
 display support when using the SMMU. This was due to the SMMU driver
 writing the wrong value of active TLB lines, effectively disabling the
 TLB and causing massive underflows on the display controller because
 of the latency introduced by the SMMU.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVzfJEAAoJEN0jrNd/PrOh9+oP/0SQz9xOzQsTHD4yT9bPg84E
 sZU+xWbUhSU3ni1Hq1I4F1HIAlCdlMsXlB7c2wTpTE55lgeDlHh5olG7Dc+6cLi2
 hAlgooMMS1TShLlcHwMDOyyvXrkjg2qLp4sy4fyPVUcYUeZIREd9RfoCEbbS/4nV
 IQV3Q99zXi1rRBILROTRdd/3AfIS1XYvOQyTIM5dzgB2Kc9MC+C2tjC2zbVg0yPK
 TFzAzTwwvagbcxvfl1y3NtYTU27VOoE7uDRGYNaXyZxbi0TwyIX+4sZvf9M84aED
 zuEJwi+V3AqMWDu6JrQXuw1WAN/602pXtPdjSMFCi/bBdlCTgq+tTCvsSMcABXZ5
 Pyk1XUPuT0UvD7GMROZRaDYmMw2fVyjswf1rjb18szw7HUEfYIdDWiuU8g1g44AB
 3SqM1F1bxdBZ52q9gFWpuOR06E8cC7lr/FPtduseUbF39N9n8JfFZEI6+w3uXdrj
 7TCEULNLvFp+oNzexHrbd/jGhrkW4aK78HttQpwpq4GW7zGeco/EW3BXC2zN5aJc
 YIfR0wVT5UrsCp2poRwpZFKtkxZVqU5t4IoB7XbL32vh1GAZf408XzAeiqYIcwv5
 537XpLg6cqGqqAw+G5TrVWS1oVYbPIiTLyHHzkEEnBlgwccSrzbDSaqzpruOMF84
 EhB0Rcuh9kFs6JIxdLnz
 =N5EP
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.3-iommu' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/tegra

iommu/tegra-smmu: Changes for v4.3-rc1

A bunch of improvements by Russell King, along with a fix to restore
display support when using the SMMU. This was due to the SMMU driver
writing the wrong value of active TLB lines, effectively disabling the
TLB and causing massive underflows on the display controller because
of the latency introduced by the SMMU.
2015-08-17 14:16:59 +02:00
Herbert Xu
9129c26da1 crypto: nx - Add forward declaration for struct crypto_aead
The file nx.h has function prototypes that use struct crypto_aead.
However, as crypto/aead.h is not included we don't have a definition
for it.  This patch adds a forward declaration to fix this.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 19:49:13 +08:00
Herbert Xu
a26bcb0486 crypto: null - Use NULL2 in Makefile
The Kconfig option NULL2 has been added as CRYPTO_MANAGER now
depends indirectly on NULL2.  However, the Makefile was not updated
to use the new option, resulting in potential build failures when
only NULL2 is enabled.

Fixes: 149a39717d ("crypto: aead - Add type-safe geniv init/exit helpers")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 19:49:13 +08:00
Addy Ke
57e104864b mmc: dw_mmc: add quirk for broken data transfer over scheme
This patch add a new quirk to add a s/w timer to notify the driver
to terminate current transfer and report a data timeout to the core,
if DTO interrupt does NOT come within the given time.

dw_mmc call mmc_request_done func to finish transfer depends on
DTO interrupt. If DTO interrupt does not come in sending data state,
the current transfer will be blocked.

We got the reply from synopsys:
There are two counters but both use the same value of [31:8] bits.
Data timeout counter doesn't wait for stop clock and you should get
DRTO even when the clock is not stopped.
Host Starvation timeout counter is triggered with stop clock condition.

This means that host should get DRTO and DTO interrupt.

But this case really exists, when driver reads tuning data from
card on RK3288-pink2 board. I measured waveforms by oscilloscope
and found that card clock was always on and data lines were always
holded high level in sending data state.

There are two possibility that data over interrupt doesn't come in
reading data state on RK3X SoCs:
- get command done interrupt, but doesn't get any data-related interrupt.
- get data error interrupt, but doesn't get data over interrupt.

Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-08-17 12:45:28 +02:00
Jaehoon Chung
40a7a463a8 mmc: dw_mmc: print the message for deprecated property
supports-highspeed was deprecated.
If someone use it, we need to notice information for it.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-08-17 12:45:27 +02:00
Jaehoon Chung
2b708df2b3 mmc: dw_mmc: remove the unused blk_setting
"blk_setting" doesn't use anywhere.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-08-17 12:45:27 +02:00
Jaehoon Chung
9e747b7e4a mmc: dw_mmc: fix the wrong condition checking
When num-slots is lower than 1, it's right that should be returned -ENODEV.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-08-17 12:45:26 +02:00
Heiko Stuebner
575c319dfe mmc: dw_mmc: fix pio mode when internal dmac is enabled
The dw_mci_init_dma() may decide to not use dma, but pio instead, caused
by things like wrong dma settings in the system.

Till now the code dw_mci_init_slot() always assumed that dma is available
when CONFIG_MMC_DW_IDMAC was defined, ignoring the host->use_dma var
set during dma init.

So when now the dma init failed for whatever reason, the transfer sizes
would still be set for dma transfers, especially including the maximum
block-count calculated from host->ring_size and resulting in a

[    4.991109] ------------[ cut here ]------------
[    4.991111] kernel BUG at drivers/mmc/core/core.c:256!
[    4.991113] Internal error: Oops - BUG: 0 [#1] SMP ARM

because host->ring_size is 0 in this case and the slot init code uses
the wrong code to calculate the values.

Fix this by selecting the correct calculations using the host->use_dma
variable instead of the CONFIG_MMC_DW_IDMAC config option.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-08-17 12:44:43 +02:00
Shawn Lin
0e3a22c044 mmc: dw_mmc: Fix coding style issues
This patch fixes the following issues reported by checkpatch.pl:
- use -EINVAL instead of -ENOSYS, to fix warning message:
   "ENOSYS means 'invalid syscall nr' and nothing else"
- split lines whose length is greater than 80 characters
- avoid quoted string split across lines
- use min_t instead of min, to fix warning message:
   "min() should probably be min_t(int, cnt, host->part_buf_count)"
- fix missing a blank line after declarations

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-08-17 11:34:32 +02:00
Alexey Brodkin
5959b32e36 mmc: dw_mmc: handle data blocks > than 4kB if IDMAC is used
As per DW MobileStorage databook "each descriptor can transfer up to 4kB
of data in chained mode", moreover buffer size that is put in "des1" is
limited to 13 bits, i.e. for example on attempt to
IDMAC_SET_BUFFER1_SIZE(desc, 8192) size value that's effectively written
will be 0.

On the platform with 8kB PAGE_SIZE I see dw_mmc gets data blocks in
SG-list of 8kB size and that leads to unpredictable behavior of the
SD/MMC controller.

In particular on write to FAT partition of SD-card the controller will
stuck in the middle of DMA transaction.

Solution to the problem is simple - we need to pass large (> 4kB) data
buffers to the controller via multiple descriptors. And that's what
that change does.

What's interesting I did try original driver on same platform but
configured with 4kB PAGE_SIZE and may confirm that data blocks passed
in SG-list to dw_mmc never exeed 4kB limit - that explains why nobody
ever faced a problem I did.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Seungwon Jeon <tgih.jun@samsung.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: arc-linux-dev@synopsys.com
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-08-17 11:34:08 +02:00
Yangbo Lu
7d70d476d0 mmc: block: add fixup of broken CMD23 for Sandisk card
Some Sandisk cards(such as "SDMB-32" and "SDM032" cards)
can't support CMD23, and would generate CMD timeout. So add
FIX-UP for these two types Sandisk cards.

Error log:
mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400900
mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400900
mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400900
end_request: I/O error, dev mmcblk0, sector 0
Buffer I/O error on device mmcblk0, logical block 0
mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400900

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:47 +02:00
Yangbo Lu
67b589a2eb mmc: sdhci-esdhc: add default quirk SDHCI_QUIRK_NO_HISPD_BIT
eSDHC supports high speed mode, but has no enabling bit for it.
Add this quirk to avoid writing to eSDHC_PROCTL[DTW] by mistake.

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:47 +02:00
Yangbo Lu
f13e5b9f3c mmc: sdio: avoid using NULL sdio_irq_thread pointer
For Freescale QorIQ LS1021AQDS board, there is a SDIO interrupt
in the process of resume without inserting SD adapter because of
some unknown issue. But the driver doesn't assign sdio_irq_thread
pointer. This will block the resume of kernel. This patch is used
to avoid using NULL sdio_irq_thread pointer.

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:46 +02:00
Andreas Fenkart
4c06654c47 mmc: omap_hsmmc: regulator automatically released by devm
Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:46 +02:00
Andreas Fenkart
f7f0f03506 mmc: omap_hsmmc: call omap_hsmmc_set_power directly
If no pdata.set_power was set by the platform code, the driver
was updating pdata with its own fallback function. This is a no-no
since pdata shall be read-only.
This patch pushes the check 'pdata->set_power != NULL' down into
the fallback functions. If pdata.set_power is really set, it calls them
and exits, otherwise the fallback code is used.

Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:45 +02:00
Andreas Fenkart
c21e678b25 Documentation: dt: update ti,am33xx-hsmmc swakeup workaround
Before 5b83b2234b the driver was hard coding the wakeup irq to
be active low. The generic pm wakeirq does not override the active
high/low parameter, hence it must be specified correctly in the
device tree.
Mind that SDIO IRQ is active low as defined in the SDIO specification

Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:45 +02:00
Ivan T. Ivanov
135b0a284d mmc: sdhci: properly check card present state when quirk NO_CARD_NO_RESET is set
Controller could have both NO_CARD_NO_RESET and BROKEN_CARD_DETECTION
quirks set. Use sdhci_do_get_cd() when applying NO_CARD_NO_RESET, which
properly check for BROKEN_CARD_DETECTION quirk.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:44 +02:00
Ivan T. Ivanov
c31d22eb33 mmc: sdhci: don't use card state polling when CD GPIO is defined
There is no reason to use polling for card detection state change when
drivers are using dedicated GPIO for this. Don't poll in this case.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:44 +02:00
Ivan T. Ivanov
88af56552b mmc: sdhci: let GPIO based card detection have higher precedence
Controller could have BROKEN_CARD_DETECTION quirk set, but drivers
could use GPIO to detect card present state. Let, when defined, GPIO
take precedence, so drivers could properly detect card state and not
use polling.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:43 +02:00
Ivan T. Ivanov
951b8c875a mmc: sdhci-msm: Boost controller core clock
Ensure SDCC is working with maximum clock otherwise card
detection could be extremely slow, up to 7 seconds.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:43 +02:00
Andy Shevchenko
829b6962f7 mmc: block: don't use parameter prefix if built as module
It's excessive to use prefix for the parameters when you do
modprobe mmc-block mmcblk.perdev_minors=16

Make this available only for built-in case.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:42 +02:00
Fabian Frederick
8292adc6ba mmc: omap: use for_each_sg() for scatterlist parsing
See Documentation/DMA-API.txt - Part Id

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:42 +02:00
Suneel Garapati
2d532d458b mmc: sdhci-of-arasan: add quirks for broken clock base
adding SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,SDHCI_QUIRK2_PRESET_VALUE_BROKEN
flags for arasan sdhc.

Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:41 +02:00
Suneel Garapati
d1955c3a9a mmc: sdhci: add quirk SDHCI_QUIRK_CLOCK_DIV_ZERO_BROKEN
adds quirk for controllers whose clock divider zero is broken,
sdhci_set_clock function will incorporate this modification.

Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:41 +02:00
Daniel Mack
6464b71409 mmc: pxamci: switch over to dmaengine use
Switch over pxamci to dmaengine. This prepares the devicetree full
support of pxamci.

This was successfully tested on a PXA3xx board, as well as PXA27x.

Signed-off-by: Daniel Mack <zonque@gmail.com>
[adapted to pxa-dma]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:40 +02:00
David Jander
642c28ab86 mmc: core: Optimize case for exactly one erase-group budget
In the (not so unlikely) case that the mmc controller timeout budget is
enough for exactly one erase-group, the simplification of allowing one
sector has an enormous performance penalty. We optimize this special case
by introducing a flag that prohibits erase-group boundary crossing, so
that we can allow trimming more than one sector at a time.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-08-17 11:32:39 +02:00
Jarkko Nikula
1dc0428854 dmaengine: Make __dma_request_slave_channel_compat() name argument constant
Inline function __dma_request_slave_channel_compat() doesn't modify "name"
argument but passes it to dma_request_slave_channel() which already takes
it as a constant.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 14:52:10 +05:30
Robert Jarzmik
0e95fb9ceb dmaengine: pxa_dma: don't use config direction parameter
Don't use the direction passed in the configuration, and rely on each
transfer's direction to prepare the transfers. This will enable
future removal of direction parameter from dma_slave_config.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-17 14:52:09 +05:30
Vinod Koul
272420214d dmaengine: Add DMA_CTRL_REUSE
This adds new descriptor flag for reusing a descriptor by submitting
multiple times by a client, for example video buffer.
Add helper APIs for this as well

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by:Robert Jarzmik <robert.jarzmik@free.fr>
2015-08-17 14:52:02 +05:30
Alexandre Courbot
7fa2593754 gpio/grgpio: fix deadlock in grgpio_irq_unmap()
As reported by Alexey Khoroshilov:

    grgpio_irq_unmap() code looks quite suspicious regarding usage of
    priv->bgc.lock spinlock.

    It locks the spinlock in line 310:

	spin_lock_irqsave(&priv->bgc.lock, flags);

    and then it can call grgpio_set_imask() in line 317:

	grgpio_set_imask(priv, i, 0);

    But grgpio_set_imask() unconditionally locks the spinlock by itself.

Fix this by moving the spinlock acquisition outside of
grgpio_set_imask().

Found by Linux Driver Verification project (linuxtesting.org).

Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-17 10:56:24 +02:00
Fabio Estevam
58268e58e6 crypto: amcc - Do a NULL check for pointer
Compare pointer-typed values to NULL rather than 0.

The semantic patch that makes this change is available
in scripts/coccinelle/null/badzero.cocci

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:55 +08:00
Herbert Xu
5e4b8c1fcc crypto: aead - Remove CRYPTO_ALG_AEAD_NEW flag
This patch removes the CRYPTO_ALG_AEAD_NEW flag now that everyone
has been converted.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:53 +08:00
Herbert Xu
b0d955ba46 crypto: aead - Remove old AEAD interfaces
Now that the AEAD conversion is complete we can rip out the old
AEAD interafce and associated code.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:50 +08:00
Herbert Xu
0a139416ee crypto: qat - Remove reference to crypto_aead_crt
The qat driver uses crypto_aead_crt in order to get the authsize.
This patch replaces it with the crypto_aead_authsize helper instead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:49 +08:00
Herbert Xu
ba3749a719 crypto: cryptd - Remove reference to crypto_aead_crt
Pretty soon the crypto_aead encrypt/decrypt hooks will disappear
as they are now always identical to those in struct aead_alg.

This patch replaces the references to these hooks with the ones
from aead_alg instead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:46 +08:00
Herbert Xu
376e0d697a crypto: echainiv - Use generic geniv init/exit helpers
This patch replaces the echainiv init/exit handlers with the generic
geniv helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:46 +08:00
Herbert Xu
659e7f5283 crypto: seqiv - Use generic geniv init/exit helpers
This patch replaces the seqiv init/exit handlers with the generic
geniv helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:46 +08:00
Herbert Xu
149a39717d crypto: aead - Add type-safe geniv init/exit helpers
This patch adds the helpers aead_init_geniv and aead_exit_geniv
which are type-safe and intended the replace the existing geniv
init/exit helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:44 +08:00
Herbert Xu
66008d4230 crypto: echainiv - Remove AEAD compatibility code
Now that we no longer have any legacy AEAD implementations the
compatibility code path can no longer be triggered.  This patch
removes it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:43 +08:00
Herbert Xu
92932d03c2 crypto: seqiv - Remove AEAD compatibility code
Now that we no longer have any legacy AEAD implementations the
compatibility code path can no longer be triggered.  This patch
removes it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:43 +08:00
Herbert Xu
8a2cd1c4a7 crypto: seqiv - Remove seqniv
Now that IPsec no longer uses seqniv we can remove it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:42 +08:00
Herbert Xu
de0ded77b9 ipsec: Replace seqniv with seqiv
Now that seqniv is identical with seqiv we no longer need it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-08-17 16:53:42 +08:00
Herbert Xu
60333f7b5d crypto: user - Remove crypto_lookup_aead call
As IV generators are now standalone AEAD transforms, we no longer
need to use the crypto_lookup_aead call.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:41 +08:00
Herbert Xu
aa1b6bb7d7 crypto: algboss - Remove reference to nivaead
This patch removes a legacy reference to nivaead which is no longer
used.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:41 +08:00
Christophe Ricard
adca3c38d8 nfc: netlink: Warning fix
When NFC_ATTR_VENDOR_DATA is not set, data_len is 0 and data is NULL.

Fixes the following warning:

net/nfc/netlink.c:1536:3: warning: 'data' may be used uninitialized
+in this function [-Wmaybe-uninitialized]
      return cmd->doit(dev, data, data_len);

Cc: stable@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-17 10:45:19 +02:00
Len Brown
656bba3068 x86/smpboot: Remove APIC.wait_for_init_deassert and atomic init_deasserted
Both the per-APIC flag ".wait_for_init_deassert",
and the global atomic_t "init_deasserted"
are dead code -- remove them.

For all APIC types, "wait_for_master()"
prevents an AP from proceeding until the BSP has set
cpu_callout_mask, making "init_deasserted" {unnecessary}:

	BSP: <de-assert INIT>
	...
	BSP: {set init_deasserted}
	AP: wait_for_master()
		set cpu_initialized_mask
		wait for cpu_callout_mask
	BSP: test cpu_initialized_mask
	BSP: set cpu_callout_mask
	AP: test cpu_callout_mask
	AP: {wait for init_deasserted}
	...
	AP: <touch APIC>

Deleting the {dead code} above is necessary to enable
some parallelism in a future patch.

Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jan H. Schönherr <jschoenh@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/de4b3a9bab894735e285870b5296da25ee6a8a5a.1439739165.git.len.brown@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-17 10:42:28 +02:00
Len Brown
a9bcaa02a5 x86/smpboot: Remove SIPI delays from cpu_up()
MPS 1.4 example code shows the following required delays during processor
on-lining:

	INIT
	 udelay(10,000)
	SIPI
	 udelay(200)
	SIPI
	 udelay(200) /* Linux actually implements this as udelay(300) */

Linux skips the udelay(10,000) on modern processors.
This patch removes the udelay(200) after each SIPI
on those same processors.

All three legacy delays can be restored by the cmdline
"cpu_init_udelay=10000".

As measured by analyze_suspend.py, this patch speeds
processor resume time on my desktop from 2.4ms to 1.8ms, per AP.

Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jan H. Schönherr <jschoenh@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/a5dfdbc8fbfdd813784da204aad5677fe459ac37.1439739165.git.len.brown@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-17 10:42:27 +02:00
Len Brown
2d99af8e8f x86/smpboot: Remove udelay(100) when polling cpu_callin_map
After the BSP sends INIT/SIPI/SIP to the AP and sees the AP
in the cpu_initialized_map, it sets the AP loose via the
cpu_callout_map, and waits for it via the cpu_callin_map.

The BSP polls the cpu_callin_map with a udelay(100)
and a schedule() in each iteration.

The udelay(100) adds no value.

For example, on my 4-CPU dekstop, the AP finishes
cpu_callin() in under 70 usec and sets the cpu_callin_mask.
The BSP, however, doesn't see that setting until over 30 usec
later, because it was still running its udelay(100)
when the AP finished.

Deleting the udelay(100) in the cpu_callin_mask polling loop,
saves from 0 to 100 usec per Application Processor.

Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jan H. Schönherr <jschoenh@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/0aade12eabeb89a688c929fe80856eaea0544bb7.1439739165.git.len.brown@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-17 10:42:27 +02:00