Same as Navi1x.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sienna_Cichlid VCN headers
v2: squash in updates (Alex)
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check current scan state by checking HCI_LE_SCAN flag and send scan
disable command only if scan is already enabled.
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Have strict check on bo mapping since on some systems, such as A+A or
hybrid, the cpu might support 5 level paging or can address memory above
48 bits but gpu might be limited by hardware to just use 48 bits. In
general, this applies to all asics where this limitation can be checked
against their max_pfn range. This restricts the range to map bo within
pratical limits of cpu and gpu for shared virtual memory access.
Reviewed-by: Oak Zeng <oak.zeng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add TPAUSE based delay which allows the CPU to enter an optimized power
state while waiting for the delay to pass. The delay is based on TSC
cycles.
- Add tsc_early_khz command line parameter to workaround the problem that
overclocked CPUs can report the wrong frequency via CPUID.16h which
causes the refined calibration to fail because the delta to the initial
frequency value is too big. With the parameter users can provide an
halfways accurate initial value.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl7XvMITHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoQ59EACWOU2E+S/b+AqKoZRAJWbTASmu2jEU
4AukhjO3A0y+G3EqnCtvQbUbKkthScSmrDJs2Dt8CTO6q3Fqv/f5JgoubgSx9Hbj
pF1hvueOvRBpinzGEJbDbv+HbkoCYr10DZ5dZ8uz120pSnlfSNNpgZ6hJkOFaUHu
nwVEJpkg2x3ZsiJrgyOfdorwbxO5dCNY9YVL3jyVXUi5QfP3lYrr3/Nz6daIRtRn
Q9tj48N4Bk4ASgmg4rSdXd6OKeZ3Oz1nerol5vFvBeaOc8PVcKSu5sSqMIHHUV2M
RJq8T4nW5Y4pkYjpdYP7Pr/3HYbSNW6eU+MycfnJOzYYTIQfFWkG2wHDNuOg/v+A
GC/grS6wNBj/+tZlvWTwLPf44h7V+sowzYPHBWounT/5drFZ+xsm8+Je4s2NtNih
rbG/4oOQ2jn05PNBCCOyLuP33efQ3ub2UHPCoUxckMiX2eqI+iWpdllZLSiSADZY
jlbXgTQ/Fa3nGKVYVDi1GYbx1rBr/HbsbgvGV4D802s7inmev0azrbgc/CECrnvO
rEa501Y1xzxZ7Zet0QvLK/7aKP532pCmgZiBSmcnS73FBbnssvNJiHlAeq4NHtN2
TsaGYLy0iPSj7siXEaeysUKRjUTNNrgRvtWfo35GDjWahgXhixIvVVpwxnWws5cj
aNR5FwxnI03V2A==
=199V
-----END PGP SIGNATURE-----
Merge tag 'x86-timers-2020-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner:
"X86 timer specific updates:
- Add TPAUSE based delay which allows the CPU to enter an optimized
power state while waiting for the delay to pass. The delay is based
on TSC cycles.
- Add tsc_early_khz command line parameter to workaround the problem
that overclocked CPUs can report the wrong frequency via CPUID.16h
which causes the refined calibration to fail because the delta to
the initial frequency value is too big. With the parameter users
can provide an halfways accurate initial value"
* tag 'x86-timers-2020-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Add tsc_early_khz command line parameter
x86/delay: Introduce TPAUSE delay
x86/delay: Refactor delay_mwaitx() for TPAUSE support
x86/delay: Preparatory code cleanup
We must check for "dss_core" instead of "dss" to avoid also matching
also "dss_dispc". This only matters for the mixed case of data
configured in device tree but with legacy booting ti,hwmods property
still enabled.
Fixes: 8b30919a4e ("ARM: OMAP2+: Handle reset quirks for dynamically allocated modules")
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are currently only setting the framedonetv_irq disabled for the SoCs
that don't have it. But we are never setting it enabled for the SoCs that
have it. Let's initialized it to true by default.
Fixes: 7324a7a0d5 ("bus: ti-sysc: Implement display subsystem reset quirk")
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We must ignore the clockactivity bit for most modules and not set it
unless specified for the module with SYSC_QUIRK_USE_CLOCKACT. Otherwise
the interface clock can be automatically gated constantly causing
unexpected performance issues.
Fixes: ae9ae12e9d ("bus: ti-sysc: Handle clockactivity for enable and disable")
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Some modules reset automatically when idled, and when re-enabled, we must
wait for the automatic OCP softreset to complete. And if optional clocks
are configured, we need to keep the clocks on while waiting for the reset
to complete.
Let's fix the issue by moving the OCP softreset code to a separate
function sysc_wait_softreset(), and call it also from sysc_enable_module()
with the optional clocks enabled.
This is based on what we're already doing for legacy platform data booting
in _enable_sysc().
Fixes: 7324a7a0d5 ("bus: ti-sysc: Implement display subsystem reset quirk")
Reported-by: Faiz Abbas <faiz_abbas@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
- Not a single new clocksource or clockevent driver!
- Device tree updates for various chips
- Fixes and improvements and cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=FFm0
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The truly boring timer and clocksource updates for 5.8:
- Not a single new clocksource or clockevent driver!
- Device tree updates for various chips
- Fixes and improvements and cleanups all over the place"
* tag 'timers-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
dt-bindings: timer: Add renesas,em-sti bindings
clocksource/drivers/timer-versatile: Clear OF_POPULATED flag
clocksource: mips-gic-timer: Mark GIC timer as unstable if ref clock changes
clocksource: mips-gic-timer: Register as sched_clock
clocksource: dw_apb_timer_of: Fix missing clockevent timers
clocksource: dw_apb_timer: Affiliate of-based timer with any CPU
clocksource: dw_apb_timer: Make CPU-affiliation being optional
dt-bindings: timer: Move snps,dw-apb-timer DT schema from rtc
dt-bindings: rtc: Convert snps,dw-apb-timer to DT schema
clocksource/drivers/timer-ti-dm: Do one override clock parent in prepare()
clocksource/drivers/timer-ti-dm: Fix spelling mistake "detectt" -> "detect"
clocksource/drivers/timer-ti-dm: Fix warning for set but not used
clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support
clocksource/drivers/timer-ti-32k: Add support for initializing directly
drivers/clocksource/arm_arch_timer: Remove duplicate error message
clocksource/drivers/arc_timer: Remove duplicate error message
clocksource/drivers/rda: drop redundant Kconfig dependency
clocksource/drivers/timer-ti-dm: Fix warning for set but not used
clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support
clocksource/drivers/timer-ti-32k: Add support for initializing directly
...
- Cleanup of the irq_domain API
- Overhaul of the interrupt chip simulator
- The usual pile of new interrupt chip drivers
- Cleanups, improvements and fixes all over the place
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl7WDy0THHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoU8gD/9kxzl/q7oZ0lnsbtORSZ68hZ+n9rwH
XkLXZVCqOpXgU0Wbe8TLmSUQfxJeMBhTqI6gxkyLWFduRKBP30ChKHbAcvRV9Xj4
s3sdkypiOgilu3skGRm0cUXDPDrACJW0QzZK0TIxVEou5j51opeM+tWb+pGbr7ao
UaKARUsVzcNhYs0K3LoM2NrfXL2NtjPkGM6CE4sx7CaEx73dJyJZHgakleLEAGAo
4ok7A71eB4DHRkeiwAPRLUzaBwGFJT86034+FvFCqwouW0FV40TpKi94Mf+a9IQv
H8HFIUwfTCvfsouzmHYUfqalmShUMGqNOU4qbHeKzf2Nf/OASTOPiQ3ejWEWMkr0
IHSjVzIeE+66RyMe2gkEmQnehrWeR9Djc7yZheo03IuO2oP3YQlpXvyA95hN7T1J
kZ2MVgjNaB7bxQ6eJyA6/xQxv4EJI0a/jQ0ojd1jnomCyRB7k40s9GU2etDmgr08
lA5z8+n9w1lbPWhaZl0BITE2mNoz/b+W+MTiRgN+CqTEXWK7Ee/otoYnZf5nkJpk
0ixxwMvREFoO9JhnxlfG1knQXmL2mLx5I3TGrz7rpx9Ycgoer1hmDWCdMFQaAADL
aVVnw3w8G8cwfqBkBYFHW6hq6228uicutcr22/klXsHnN6OYTHxVRvMb8HP3R7AJ
ExGk4kquk9DhCQ==
=Pi5h
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The generic interrupt departement provides:
- Cleanup of the irq_domain API
- Overhaul of the interrupt chip simulator
- The usual pile of new interrupt chip drivers
- Cleanups, improvements and fixes all over the place"
* tag 'irq-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
irqchip: Fix "Loongson HyperTransport Vector support" driver build on all non-MIPS platforms
dt-bindings: interrupt-controller: Add Loongson PCH MSI
irqchip: Add Loongson PCH MSI controller
dt-bindings: interrupt-controller: Add Loongson PCH PIC
irqchip: Add Loongson PCH PIC controller
dt-bindings: interrupt-controller: Add Loongson HTVEC
irqchip: Add Loongson HyperTransport Vector support
genirq: Check irq_data_get_irq_chip() return value before use
irqchip/sifive-plic: Improve boot prints for multiple PLIC instances
irqchip/sifive-plic: Setup cpuhp once after boot CPU handler is present
irqchip/sifive-plic: Set default irq affinity in plic_irqdomain_map()
irqchip/gic-v2, v3: Drop extra IRQ_NOAUTOEN setting for (E)PPIs
irqdomain: Allow software nodes for IRQ domain creation
irqdomain: Get rid of special treatment for ACPI in __irq_domain_add()
irqdomain: Make __irq_domain_add() less OF-dependent
iio: dummy_evgen: Fix use after free on error in iio_dummy_evgen_create()
irqchip/gic-v3-its: Balance initial LPI affinity across CPUs
irqchip/gic-v3-its: Track LPI distribution on a per CPU basis
genirq/irq_sim: Simplify the API
irqdomain: Make irq_domain_reset_irq_data() available to non-hierarchical users
...
This can only happen if there's a bug somewhere, so let's make it a WARN
not a printk. Also, I think it's safest to ignore the corruption rather
than trying to fix it by removing a cache entry.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is already taken care of by drm_atomic_helper_shutdown(), and
in that case only for the CRTC which are actually on.
Only tricky bit here is that we kill the interrupt handling before we
shut down crtc, so need to reorder that.
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602095140.36678-3-daniel.vetter@ffwll.ch
This is already done as part of the drm_atomic_helper_shutdown(),
and in that case only for the crtc which are actually on.
v2: I overlooked that malidp also needs to have it's interrupt shut
down reordered.
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602095505.37509-1-daniel.vetter@ffwll.ch
The DP spec says:
"When the combination of the requested pre-emphasis level and
voltage swing exceeds the capability of a DPTX, the DPTX shall
set the pre-emphasis level according to the request and use the
highest voltage swing it can output with the given pre-emphasis level."
and
"When a DPTX reads a request beyond the limits of this Standard,
the DPTX shall set the pre-emphasis level according to the request
and set the highest voltage swing level it can output with the
given pre-emphasis level. If a DPTX is requested for 9.5dB of
pre-emphasis level (may be supported for a DPTX) and cannot support
that level, it shall set the pre-emphasis level to the next
highest level, 6dB."
Ie. we should first validate the pre-emphasis, and then select
the appropriate vswing for it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-6-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
According to the DP spec supporting vswing 1 + preemph 2 is
mandatory. We don't have the hw settings for that though. In
order to pretend to follow the DP spec let's just select
vswing 0 + preemph 2 in this case (the DP spec says to use
the requested preemph in preference to the vswing when the
requested values aren't supported).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
cpt/ppt support pre-emphasis level 3. Let's actually declare
support for it, instead of clamping things to level 2.
Also tweak the if-ladder in intel_dp_voltage_max() to match
intel_dp_pre_emphasis_max() to make it easier to compare them.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Currently this seems to work by converting the sgt into a pages array,
and then treating it like a native object. Do the right thing and
redirect mmap to the exporter.
With this nothing is calling get_pages anymore on imported dma-buf,
and we can start to remove the use of the ->pages array for that case.
v2: Rebase
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200511093554.211493-8-daniel.vetter@ffwll.ch
There's no direct harm, because for the shmem helpers these are noops
on imported buffers. The trouble is in the locks these take - I want
to change dma_buf_vmap locking, and so need to make sure that we only
ever take certain locks on one side of the dma-buf interface: Either
for exporters, or for importers.
v2: Change the control flow less compared to what's there (Thomas)
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514202256.490926-1-daniel.vetter@ffwll.ch
We infrequently use the direct i915 backpointer from the i915_request,
so do we really need to waste the space in the struct for it? 8 bytes
from the most frequently allocated struct vs an 3 bytes and pointer
chasing in using rq->engine->i915?
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602220953.21178-1-chris@chris-wilson.co.uk
There's no direct harm, because for the shmem helpers these are noops
on imported buffers. The trouble is in the locks these take - I want
to change dma_buf_vmap locking, and so need to make sure that we only
ever take certain locks on one side of the dma-buf interface: Either
for exporters, or for importers.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200511093554.211493-6-daniel.vetter@ffwll.ch
drm_gem_shmem_get_sg_table is meant to implement
obj->funcs->get_sg_table, for prime exporting. The one we want is
drm_gem_shmem_get_pages_sgt, which also handles imported dma-buf, not
just native objects.
v2: Rebase, this stuff moved around in
commit 2f2aa13724
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Fri Feb 7 08:46:38 2020 +0100
drm/virtio: move virtio_gpu_mem_entry initialization to new function
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200511093554.211493-5-daniel.vetter@ffwll.ch
- Move the shmem helper section to the drm-mm.rst file, next to the
vram helpers. Makes a lot more sense there with the now wider scope.
Also, that's where the all the other backing storage stuff resides.
It's just the framebuffer helpers that should be in the kms helper
section.
- Try to clarify which functiosn are for implementing
drm_gem_object_funcs, and which for drivers to call directly. At
least one driver screwed that up a bit.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200511093554.211493-4-daniel.vetter@ffwll.ch
No real functional change, since this just converts an annoying Oops
into a more harmless WARNING backtrace. It's still a driver bug.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200511093554.211493-3-daniel.vetter@ffwll.ch
I honestly don't exactly understand what's going on here, but the
current code is wrong for sure: It calls dma_buf_vunmap without ever
calling dma_buf_vmap.
What I'm not sure about is whether the WARN_ON is correct:
- msm imports dma-buf using drm_prime_sg_to_page_addr_arrays. Which is
a pretty neat layering violation of how you shouldn't peek behind
the curtain of the dma-buf exporter, but par for course. Note that
all the nice new helpers don't (and we should probably have a bit a
warning about this in the kerneldoc).
- but then in the get_vaddr() in msm_gem.c, we seems to happily wrap a
vmap() around any object with ->pages set (so including imported
dma-buf).
- I'm not seeing any guarantees that userspace can't use an imported
dma-buf for e.g. MSM_SUBMIT_CMD_BUF in a5xx_submit_in_rb, so no
guarantees that an imported dma-buf won't end up with a ->vaddr set.
But even if that WARN_ON is wrong, cleaning up a vmap() done by msm by
calling dma_buf_vunmap is the wrong thing to do.
v2: Rob said in review that we do indeed have a gap in get_vaddr() that
needs to be plugged. But the users I've found aren't legit users on
imported dma-buf, so we can just reject that.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200514201117.465146-1-daniel.vetter@ffwll.ch
If we injected an error (such as pretending the GuC firmware was
broken), then suppress the error message as it is expected and our CI
complains if it sees any *ERROR*.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200603104657.25651-1-chris@chris-wilson.co.uk
'pinctrl_unregister()' should not be called to undo
'devm_pinctrl_register_and_init()', it is already handled by the framework.
This simplifies the error handling paths of the probe function.
The 'imx_free_resources()' can be removed as well.
Fixes: a51c158bf0 ("pinctrl: imx: use radix trees for groups and functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20200530204955.588962-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A coccicheck run provided information like the following:
drivers/pinctrl/sirf/pinctrl-sirf.c:798:2-8: ERROR: missing put_device;
call of_find_device_by_node on line 792, but without a corresponding
object release within this function.
Generated by: scripts/coccinelle/free/put_device.cocci
Thus add a jump target to fix the exception handling for this
function implementation.
Fixes: 5130216265 ("PINCTRL: SiRF: add GPIO and GPIO irq support in CSR SiRFprimaII")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20200603013532.755220-1-yukuai3@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When 'pinctrl_register()' has been turned into 'devm_pinctrl_register()',
an error handling path has not been updated.
Axe a now unneeded 'pinctrl_unregister()'.
Fixes: e55e025d16 ("pinctrl: imxl: Use devm_pinctrl_register() for pinctrl registration")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200530201952.585798-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Leverage the IRQCHIP_MASK_ON_SUSPEND flag in order to avoid having to
specifically treat the GPIO interrupts during suspend and resume, and
simply implement an irq_set_wake() callback that is responsible for
enabling the parent wake-up interrupt as a wake-up interrupt.
To avoid allocating unnecessary resources for other chips, the wake-up
interrupts are only initialized if we have a brcm,bcm7211-gpio
compatibility string.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200531001101.24945-5-f.fainelli@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The BCM7211 SoC uses the same pinconf_ops as the ones defined for the
BCM2711 SoC, match the compatible string and use the correct set of
options.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200531001101.24945-4-f.fainelli@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
BCM7211 supports wake-up interrupts in the form of optional interrupt
lines, one per bank, plus the "all banks" interrupt line.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200531001101.24945-3-f.fainelli@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Driver use interrupt-parent field so update the bindings to allow it.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200513145935.22493-15-benjamin.gaignard@st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
ACPI_PTR() becomes a no-op when !CONFIG_ACPI. This is not needed since
we always have ID table enabled. Moreover, in the mentioned case compiler
will complain about defined but not used variable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200520211916.25727-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
I got a build failure with CONFIG_ARCH_SPRD=m when the
main portion of the clock driver failed to get linked into
the kernel:
ERROR: modpost: "sprd_pll_sc_gate_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_pll_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_div_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_comp_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_mux_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_gate_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_sc_gate_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_clk_probe" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_clk_regmap_init" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_pll_ops" [drivers/clk/sprd/sc9860-clk.ko] undefined!
ERROR: modpost: "sprd_div_ops" [drivers/clk/sprd/sc9860-clk.ko] undefined!
ERROR: modpost: "sprd_mux_ops" [drivers/clk/sprd/sc9860-clk.ko] undefined!
This is a combination of two trivial bugs:
- A platform should not be 'tristate', it should be a 'bool' symbol
like the other platforms, if only for consistency, and to avoid
surprises like this one.
- The clk Makefile does not traverse into the sprd subdirectory
if the platform is disabled but the drivers are enabled for
compile-testing.
Fixing either of the two would be sufficient to address the link failure,
but for correctness, both need to be changed.
Fixes: 2b1b799d76 ("arm64: change ARCH_SPRD Kconfig to tristate")
Fixes: d41f59fd92 ("clk: sprd: Add common infrastructure")
Acked-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
snd_es968_pnp_detect() misses a snd_card_free() in a failed path.
Add the missed function call to fix it.
Fixes: a20971b201 ("ALSA: Merge es1688 and es968 drivers")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200603092459.1424093-1-hslester96@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
dp/hdmi ati hda is not shown in audio settings
[ rearranged to a more appropriate place per device number order
-- tiwai ]
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200603013137.1849404-1-alexander.deucher@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since CRW events are (should be) rare, let's put a trace
in that routine too.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-9-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Use the IRQ to notify userspace that there is a CRW
pending in the region, related to path-availability
changes on the passthrough subchannel.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-8-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This region provides a mechanism to pass a Channel Report Word
that affect vfio-ccw devices, and needs to be passed to the guest
for its awareness and/or processing.
The base driver (see crw_collect_info()) provides space for two
CRWs, as a subchannel event may have two CRWs chained together
(one for the ssid, one for the subchannel). As vfio-ccw will
deal with everything at the subchannel level, provide space
for a single CRW to be transferred in one shot.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505122745.53208-7-farman@linux.ibm.com>
[CH: added padding to ccw_crw_region]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
