Allow a ULP to ask the core to provide a completion queue based on a
least-used search on a per-device CQ pools. The device CQ pools grow in a
lazy fashion when more CQs are requested.
This feature reduces the amount of interrupts when using many QPs. Using
shared CQs allows for more effcient completion handling. It also reduces
the amount of overhead needed for CQ contexts.
Test setup:
Intel(R) Xeon(R) Platinum 8176M CPU @ 2.10GHz servers.
Running NVMeoF 4KB read IOs over ConnectX-5EX across Spectrum switch.
TX-depth = 32. The patch was applied in the nvme driver on both the target
and initiator. Four controllers are accessed from each core. In the
current test case we have exposed sixteen NVMe namespaces using four
different subsystems (four namespaces per subsystem) from one NVM port.
Each controller allocated X queues (RDMA QPs) and attached to Y CQs.
Before this series we had X == Y, i.e for four controllers we've created
total of 4X QPs and 4X CQs. In the shared case, we've created 4X QPs and
only X CQs which means that we have four controllers that share a
completion queue per core. Until fourteen cores there is no significant
change in performance and the number of interrupts per second is less than
a million in the current case.
==================================================
|Cores|Current KIOPs |Shared KIOPs |improvement|
|-----|---------------|--------------|-----------|
|14 |2332 |2723 |16.7% |
|-----|---------------|--------------|-----------|
|20 |2086 |2712 |30% |
|-----|---------------|--------------|-----------|
|28 |1971 |2669 |35.4% |
|=================================================
|Cores|Current avg lat|Shared avg lat|improvement|
|-----|---------------|--------------|-----------|
|14 |767us |657us |14.3% |
|-----|---------------|--------------|-----------|
|20 |1225us |943us |23% |
|-----|---------------|--------------|-----------|
|28 |1816us |1341us |26.1% |
========================================================
|Cores|Current interrupts|Shared interrupts|improvement|
|-----|------------------|-----------------|-----------|
|14 |1.6M/sec |0.4M/sec |72% |
|-----|------------------|-----------------|-----------|
|20 |2.8M/sec |0.6M/sec |72.4% |
|-----|------------------|-----------------|-----------|
|28 |2.9M/sec |0.8M/sec |63.4% |
====================================================================
|Cores|Current 99.99th PCTL lat|Shared 99.99th PCTL lat|improvement|
|-----|------------------------|-----------------------|-----------|
|14 |67ms |6ms |90.9% |
|-----|------------------------|-----------------------|-----------|
|20 |5ms |6ms |-10% |
|-----|------------------------|-----------------------|-----------|
|28 |8.7ms |6ms |25.9% |
|===================================================================
Performance improvement with sixteen disks (sixteen CQs per core) is
comparable.
Link: https://lore.kernel.org/r/1590568495-101621-3-git-send-email-yaminf@mellanox.com
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Modern device tree bindings are supposed to be created as YAML-files
in accordance with dt-schema. This commit replaces two DW SPI legacy
bare text bindings with YAML file. As before the bindings file states
that the corresponding dts node is supposed to be compatible either
with generic DW APB SSI controller or with Microsemi/Amazon/Renesas/Intel
vendors-specific controllers, to have registers, interrupts and clocks
properties. Though in case of Microsemi version of the controller
there must be two registers resources specified. Properties like
clock-names, reg-io-width, cs-gpio, num-cs, DMA and slave device
sub-nodes are optional.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Link: https://lore.kernel.org/r/20200529182544.9807-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
It's better to understand what bits are set for DMA and for IRQ handling
in mid_spi_dma_setup() if they are grouped accordingly. Thus,
refactor mid_spi_dma_setup() to separate DMA and IRQ configuration.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200529183150.44149-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The 2afccbd283 ("spi: dw: Discard static DW DMA slave structures")
did a clean up of global variables, which is fine, but messed up with
the carefully provided information in the custom DMA slave structures.
There reader can find an assignment of the DMA request lines in use.
Partially revert the above mentioned commit to restore readability
and maintainability of the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200529183150.44149-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A pre-step for adding shared CQs. Add the infrastructure to prevent shared
CQ users from altering the CQ configurations. For now all cqs are marked
as private (non-shared). The core driver should use the new force
functions to perform resize/destroy/moderation changes that are not
allowed for users of shared CQs.
Link: https://lore.kernel.org/r/1590568495-101621-2-git-send-email-yaminf@mellanox.com
Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
kobject_init_and_add() takes reference even when it fails. If this
function returns an error, kobject_put() must be called to properly clean
up the memory associated with the object. Previous
commit b8eb718348 ("net-sysfs: Fix reference count leak in
rx|netdev_queue_add_kobject") fixed a similar problem.
Link: https://lore.kernel.org/r/20200528030231.9082-1-wu000273@umn.edu
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a spelling mistake in an error message. Fix it.
Link: https://lore.kernel.org/r/20200528110709.400935-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The IDSP method doesn't appear to exist on the most recent Intel platforms:
instead, the IDSP data is included in the GDDV blob. Since we probably
don't want to decompress and parse that in-kernel, just allow any UUID to
be written if IDSP is missing.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@linux.intel.com>
[ rzhang: fix checkpatch warning in changelog ]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20200414020953.255364-3-matthewgarrett@google.com
The platform vendor may expose an array of OEM-specific values to be used
in determining DPTF policy. These are obtained via the ODVP method, and
then simply exposed in sysfs. In addition, they are updated when a
notification is received or when the DPTF policy is changed by userland.
Conflicts:
drivers/thermal/intel/int340x_thermal/int3400_thermal.c
Signed-off-by: Matthew Garrett <mjg59@google.com>
Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20200414020953.255364-2-matthewgarrett@google.com
Implementing DPTF properly requires making use of firmware-provided
information associated with the INT3400 device. Calling GDDV provides a
buffer of information which userland can then interpret to determine
appropriate DPTF policy.
Conflicts:
drivers/thermal/intel/int340x_thermal/int3400_thermal.c
Signed-off-by: Matthew Garrett <mjg59@google.com>
Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20200414020953.255364-1-matthewgarrett@google.com
For TMU v2, TMSAR registers need to be set properly to get the
accurate temperature values.
Also the temperature read needs to be converted to degree Celsius
since it is in degrees Kelvin.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200526060212.4118-1-andy.tang@nxp.com
The pointer raq is being assigned twice. Fix this by removing one of the
redundant assignments.
Fixes: 14ba87304b ("RDMA/hns: Remove redundant type cast for general pointers")
Link: https://lore.kernel.org/r/20200528150427.420624-1-colin.king@canonical.com
Addressses-Coverity: ("Evaluation order violation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The mlx5 VF driver doesn't set QP tx port affinity because it doesn't know
if the lag is active or not, since the "lag_active" works only for PF
interfaces. In this case for VF interfaces only one lag is used which
brings performance issue.
Add a lag_tx_port_affinity CAP bit; When it is enabled and
"num_lag_ports > 1", then driver always set QP tx affinity, regardless
of lag state.
Link: https://lore.kernel.org/r/20200527055014.355093-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This reverts commit 96cb7cf13d.
This change was used for DCN2 bringup and is no longer desired.
In fact it breaks backlight on DCN2 systems.
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Michael Chiu <Michael.Chiu@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reported-and-tested-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
There will be no further interrupt without proper ack
for current one.
V2: fix typo to really set ACK bit only
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the fru eeprom header guard and include it in the .c file.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gpu reset is implemented for navi so we can enable this.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
navi never supported the pci config reset. Neither did
vega.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For access via ioctl for tools like umr and mesa.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than relying on gpu info firmware.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than checking of the variable is enabled and the
chip is the right family check for the presence of the
discovery table.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GPU info firmware is only applicable at bring up when the
IP discovery table is not present. If it's available, use that
first and then fallback to parsing the gpu info firmware.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thermal control is performed by PMFW. What handled in driver is
just whether or not to enable the alert(to driver).
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also the new logics for MP1 SW IRQs disablement/enablement are added.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added missing thermal IRQs disablement on suspend.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User can check and set the enablement of throttling logging and
the interval between each logging.
V2: simplify the sysfs interface(no string parsing)
V3: add proper lock protection on updating throttling_logging_rs.interval
V4: documentation cosmetic per Luben's suggestion
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently this feature is supported on Arcturus only. PMFW will
interrupt driver the first time when thermal throttling happened
and every one second afterwards if the throttling continuing. On
receiving the 1st interrupt, driver logs it the first time. However,
if the throttling continues, the logging will be performed every
minute to avoid log flooding.
V2: simplify the implemention by ratelimited printk
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable this for Arcturus only for now.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fit the latest 54.24.0 PMFW.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There will be no further interrupt without proper ack
for current one.
V2: fix typo to really set ACK bit only
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently pointer pdd is being dereferenced when assigning pointer
dpm and then pdd is being null checked. Fix this by checking if
pdd is null before the dereference of pdd occurs.
Addresses-Coverity: ("Dereference before null check")
Fixes: 32cb59f313 ("drm/amdkfd: Track SDMA utilization per process")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return an error for sysfs and debugfs power interfaces during
gpu reset and suspend. Prevents access to the hw while it may
be in an unusable state.
v2: squash in fix to drop suspend check
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ib_srpt driver limits max_send_sge to 16. Since that is a workaround
for an mlx4 bug that has been fixed, increase max_send_sge. See also
commit f95ccffc71 ("IB/mlx4: Use 4K pages for kernel QP's WQE buffer").
Link: https://lore.kernel.org/r/20200525172212.14413-5-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since srpt_post_recv() always sets num_sge to 1, reduce the max_recv_sge
parameter that is used at queue pair allocation time to 1.
Link: https://lore.kernel.org/r/20200525172212.14413-4-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since the session name by itself is not sufficient to uniquely identify a
queue pair, include the queue pair number. Show the ASCII channel state
name instead of the numeric value. This change makes the ib_srpt debug
output more consistent.
Link: https://lore.kernel.org/r/20200525172212.14413-3-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Increase the flexibility of the SRP initiator driver by making the channel
count configurable per target instead of only providing a kernel module
parameter for configuring the channel count.
Link: https://lore.kernel.org/r/20200525172212.14413-2-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This reverts commit ecfbd3cf3b since Lukas Wunner noticed that we
start operating on the hardware before we check to see if this is a
spurious interrupt.
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
* Update range request API;
* Add ACPI DSM support;
* Support enabling 5.2GHz bands in Indonesia via ACPI;
* Bump FW API version to 56;
* TX queues refactoring started;
* Fix one memory leak;
* Some other small fixes and clean-ups;
-----BEGIN PGP SIGNATURE-----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=nlI2
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-for-kalle-2020-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Third set of iwlwifi patches intended for v5.8
* Update range request API;
* Add ACPI DSM support;
* Support enabling 5.2GHz bands in Indonesia via ACPI;
* Bump FW API version to 56;
* TX queues refactoring started;
* Fix one memory leak;
* Some other small fixes and clean-ups;
# gpg: Signature made Fri 29 May 2020 10:38:28 AM EEST using RSA key ID 1A3CC5FA
# gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>"
# gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
The commit 7b11eab041 ("blk-mq: blk-mq: provide forced completion
method") exports new API to force a request to complete without error
injection.
There should be no error injection when completing a request by timeout
handler.
Otherwise, the below would hang because timeout handler is failed.
echo 100 > /sys/kernel/debug/fail_io_timeout/probability
echo 1000 > /sys/kernel/debug/fail_io_timeout/times
echo 1 > /sys/block/nullb0/io-timeout-fail
dd if=/dev/zero of=/dev/nullb0 bs=512 count=1 oflag=direct
With this patch, the timeout handler is able to complete the IO.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
SD8997 firmware sends TLV_TYPE_MAX_CONN with struct hw_spec_max_conn to
inform kernel about maximum number of p2p connections and stations in AP
mode.
During initialization of SD8997 wifi chip kernel prints warning:
mwifiex_sdio mmc0:0001:1: Unknown GET_HW_SPEC TLV type: 0x217
This patch adds support for parsing TLV_TYPE_MAX_CONN (0x217) and sets
appropriate cfg80211 member 'max_ap_assoc_sta' from retrieved structure.
It allows userspace to retrieve NL80211_ATTR_MAX_AP_ASSOC_STA attribute.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200521123559.29028-1-pali@kernel.org
During initialization of SD8997 wifi chip kernel prints warnings:
mwifiex_sdio mmc0:0001:1: Unknown api_id: 3
mwifiex_sdio mmc0:0001:1: Unknown api_id: 4
This patch adds support for parsing all api ids provided by SD8997
firmware.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200521123444.28957-1-pali@kernel.org
As reported by kbuild test robot, mixer quirks for RME Babyface
Pro used plain integer instead of NULL.
Fixes: 3e8f3bd047 ("ALSA: usb-audio: RME Babyface Pro mixer patch")
Signed-off-by: Thomas Ebeling <penguins@bollie.de>
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200529173248.zzawijfvw73kzjxt@bollie.ca9.eu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The problem is that we always copy a minimum of ETH_ZLEN (60) bytes from
skb->data even when skb->len is less than ETH_ZLEN so it leads to a read
overflow.
The fix is to pad skb->data to at least ETH_ZLEN bytes.
Cc: <stable@vger.kernel.org>
Reported-by: Hu Jiahui <kirin.say@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200527184830.GA1164846@mwanda
Set MES watermark size to 0x50 for 43012. It fixes SDIO bus hang issue
when running at high throughput.
Signed-off-by: Double Lo <double.lo@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200529034938.124533-6-chi-hsien.lin@cypress.com
Set F2 blocksize to 256 bytes and watermark to 0x40 for 4354/4356 SDIO.
Also enable and configure F1 MesBusyCtrl. It would resolve random driver
crash issue.
Signed-off-by: Frank Kao <frank.kao@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200529034938.124533-4-chi-hsien.lin@cypress.com
Set F2 blocksize to 256 bytes for 4373. It fixes DMA error while having
UDP bi-directional traffic. Also use a defined F1 MesBusyCtrl value.
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200529034938.124533-2-chi-hsien.lin@cypress.com
