When the system administrator asks the driver to soft or hard reset the
device through sysfs, the driver should display a warning in the kernel log
to explain why it suddenly resets the device.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Move the code of device CPU initialization from being ASIC-Dependent to
common code. In addition, add support for the new error reporting feature
of the firmware boot code.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We want to remove the following restrictions/assumptions in our driver:
1. The H/W queue index is also the completion queue index.
2. The H/W queue index is also the IRQ number of the completion queue.
3. All queues of the same type have consecutive indexes.
Therefore we add the support for H/W queues of the same type with
nonconsecutive indexes and completion queue index and IRQ number different
than the H/W queue index.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Stop-on-error mode in DMA is useful as it stops the transaction
immediately upon error e.g. page fault.
But it may cause the next command submission to fail as is leaves the DMA
in unstable state.
Therefore we remove the stop-on-error configuration from the DMA.
Stop-on-err is still available for debug.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Upon reset of the ASIC, the driver would have waited for the CPU to come
out of reset before finishing the reset process. This was done for the
purpose of making the CPU available to answer FLR requests. However, when a
VM shuts down, the driver isn't removed so a reset never happens.
Therefore, remove this waiting period as we don't need it.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
User space checkpoint and restart tool (CRIU) needs the page's change
to be soft tracked. This allows to do a pre checkpoint and then dump
only touched pages.
Signed-off-by: Guoyun Sun <sunguoyun@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
These are exposed to userland alternatively via the new CPUCFG
instruction on Loongson-3A R4 and above. Add definitions for readback
on older cores.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add the constants for easier and maintainable composition of CPUCFG
values.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix some symbol names to align with Loongson's User Manual wording. Also
correct the comment in csr_readq() suggesting the wrong instruction in
use.
Fixes: 6a6f9b7daf ("MIPS: Loongson: Add CFUCFG&CSR support")
Signed-off-by: WANG Xuerui <git@xen0n.name>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When CONFIG_HAVE_STD_PC_SERIAL_PORT is set, there exists build errors
of 8250-platform.c due to linux/module.h is not included.
CONFIG_HAVE_STD_PC_SERIAL_PORT is not used in arch/mips for many years,
8250-platform.c is also not built and used, so it is not necessary to
fix the build errors, just remove the not used file 8250-platform.c and
the related code in Kconfig and Makefile.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When ATI Radeon GPU driver has been compiled directly into the kernel
instead of as a module, we should make sure the firmware for the model
(check available ones in /lib/firmware/radeon) is built-in to the kernel
as well, otherwise there exists the following fatal error during GPU init,
change CONFIG_DRM_RADEON=y to CONFIG_DRM_RADEON=m to fix it.
[ 1.900997] [drm] Loading RS780 Microcode
[ 1.905077] radeon 0000:01:05.0: Direct firmware load for radeon/RS780_pfp.bin failed with error -2
[ 1.914140] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[ 1.920405] [drm:r600_init] *ERROR* Failed to load firmware!
[ 1.926069] radeon 0000:01:05.0: Fatal error during GPU init
[ 1.931729] [drm] radeon: finishing device.
Fixes: 024e6a8b5b ("MIPS: Loongson: Add a Loongson-3 default config file")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Alex Elder says:
====================
net: ipa: sc7180 suspend/resume
This series permits suspend/resume to work for the IPA driver
on the Qualcomm SC7180 SoC. The IPA version on this SoC requires
interrupts to be enabled when the suspend and resume callbacks are
made, and the first patch moves away from using the noirq variants.
The second patch fixes a problem with resume that occurs because
pending interrupts were being cleared before starting a channel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In gsi_channel_start() there is harmless-looking comment "Clear the
channel's event ring interrupt in case it's pending". The intent
was to avoid getting spurious interrupts when first bringing up a
channel.
However we now use channel stop/start to implement suspend and
resume, and an interrupt pending at the time we resume is actually
something we don't want to ignore.
The very first time we bring up the channel we do not expect an
interrupt to be pending, and even if it were, the effect would
simply be to schedule NAPI on that channel, which would find nothing
to do, which is not a problem.
Stop clearing any pending IEOB interrupt in gsi_channel_start().
That leaves one caller of the trivial function gsi_isr_ieob_clear().
Get rid of that function and just open-code it in gsi_isr_ieob()
instead.
This fixes a problem where suspend/resume IPA v4.2 would get stuck
when resuming after a suspend.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the suspend and resume callbacks rather than suspend_noirq and
resume_noirq. With IPA v4.2, we use the CHANNEL_STOP command to
implement a suspend, and without interrupts enabled, that command
won't complete.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Reorganize trap data
This patch set does not include any functional changes. It merely
reworks the internal storage of traps, trap groups and trap policers in
mlxsw to each use a single array.
These changes allow us to get rid of the multiple arrays we currently
have for traps, which make the trap data easier to validate and extend
with more per-trap information in the future. It will also allow us to
more easily add per-ASIC traps in future submissions.
Last two patches include minor changes to devlink-trap selftests.
Tested with existing devlink-trap selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It can be derived dynamically from the trap's name, so drop it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One blank line is enough.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each trap registered with devlink is mapped to one or more Rx listeners.
These listeners allow the switch driver (e.g., mlxsw_spectrum) to
register a function that is called when a packet is received (trapped)
for a specific reason.
Currently, three arrays are used to describe the mapping between the
logical devlink traps and the Rx listeners.
Instead, get rid of these arrays and store all the information in one
array that is easier to validate and extend with more per-trap
information.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use one array to store all the information about all the trap groups
instead of hard coding it in code. This will be used in future patches
to disable certain functionality (e.g., policer binding) on a trap group
basis.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of maintaining an array of policers and a linked list, only
maintain an array.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'struct mlxsw_sp_trap_policer_item' is only used in one file, so move it
there.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After having switched to devm_mdiobus_register() also this remaining
call to mdiobus_unregister() can be removed.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The iteration count value used in gsi_channel_poll() is intended to
limit poll iterations to the budget supplied as an argument. But
it's never updated.
Fix this bug by incrementing the count each time through the loop.
Reported-by: Sharath Chandra Vurukala <sharathv@codeaurora.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
ethtool: set_channels: add a few more checks
There seems to be a few more things we can check in the core before
we call drivers' ethtool_ops->set_channels. Adding the checks to
the core simplifies the drivers. This set only includes changes
to the NFP driver as an example.
There is a small risk in the first patch that someone actually
purposefully accepts a strange configuration without RX or TX
channels, but I couldn't find such a driver in the tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't call drivers if nothing changed. Netlink code already
contains this logic.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Core will now perform this check.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Having a channel config with no ability to RX or TX traffic is
clearly wrong. Check for this in the core so the drivers don't
have to.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC8684 allows to send 32-bit DATA_ACKs as long as the peer is not
sending 64-bit data-sequence numbers. The 64-bit DSN is only there for
extreme scenarios when a very high throughput subflow is combined with a
long-RTT subflow such that the high-throughput subflow wraps around the
32-bit sequence number space within an RTT of the high-RTT subflow.
It is thus a rare scenario and we should try to use the 32-bit DATA_ACK
instead as long as possible. It allows to reduce the TCP-option overhead
by 4 bytes, thus makes space for an additional SACK-block. It also makes
tcpdumps much easier to read when the DSN and DATA_ACK are both either
32 or 64-bit.
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a client moves from a DSA user port to a software port in a bridge,
it cannot reach any other clients that connected to the DSA user ports.
That is because SA learning on the CPU port is disabled, so the switch
ignores the client's frames from the CPU port and still thinks it is at
the user port.
Fix it by enabling SA learning on the CPU port.
To prevent the switch from learning from flooding frames from the CPU
port, set skb->offload_fwd_mark to 1 for unicast and broadcast frames,
and let the switch flood them instead of trapping to the CPU port.
Multicast frames still need to be trapped to the CPU port for snooping,
so set the SA_DIS bit of the MTK tag to 1 when transmitting those frames
to disable SA learning.
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The goal is to be able to inherit the initial devconf parameters from the
current netns, ie the netns where this new netns has been created.
This is useful in a containers environment where /proc/sys is read only.
For example, if a pod is created with specifics devconf parameters and has
the capability to create netns, the user expects to get the same parameters
than his 'init_net', which is not the real init_net in this case.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add driver level bulking to the XDP_TX action.
An array of frame descriptors is held for each Tx frame queue and
populated accordingly when the action returned by the XDP program is
XDP_TX. The frames will be actually enqueued only when the array is
filled. At the end of the NAPI cycle a flush on the queued frames is
performed in order to enqueue the remaining FDs.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the following warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc4-next-20200507-syzkaller #0 Not tainted
-----------------------------
net/ipv6/ip6mr.c:124 RCU-list traversed in non-reader section!!
ipmr_new_table() returns an existing table, but there is no table at
init. Therefore the condition: either holding rtnl or the list is empty
is used.
Fixes: d1db275dd3 ("ipv6: ip6mr: support multiple tables")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bugs, mostly for AMD processors. And a few other x86 fixes.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6/0xcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOZuwf/bQZw/SP9awLjOOVsRaSWUmwRGD4q
6KVq9+JYsPU4CyJ7P+vdsFF39a0ixoAnKWqRe/vsXdXZrdYCDUuQxh+7X+lmjKAb
dCQBnoqxI0w3yuxrm9Kn6Xs1AGIWibaRlZnXUKbuyn4ecFrh08OfYKGkYsEovhxK
G4ftY4/xyM7Qvm0fq7ZmzxPrkzd74HDZBvB83R6uiyPiX3w4O9qumqkUogcVXIJX
l3mnvSPClDDX4FOr8uhnU93varuR7Bek4Fh+Abj4uNks/F3z9ooJO9Hy9E+V5fhY
g6Oj2IrxDwJ2G6hqyucr1kujukJC1bX2nMZ1O4gNayXsxZEU/JtI0Y26SA==
=EzBt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"A new testcase for guest debugging (gdbstub) that exposed a bunch of
bugs, mostly for AMD processors. And a few other x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce
KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c
KVM: SVM: Disable AVIC before setting V_IRQ
KVM: Introduce kvm_make_all_cpus_request_except()
KVM: VMX: pass correct DR6 for GD userspace exit
KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6
KVM: SVM: keep DR6 synchronized with vcpu->arch.dr6
KVM: nSVM: trap #DB and #BP to userspace if guest debugging is on
KVM: selftests: Add KVM_SET_GUEST_DEBUG test
KVM: X86: Fix single-step with KVM_SET_GUEST_DEBUG
KVM: X86: Set RTM for DB_VECTOR too for KVM_EXIT_DEBUG
KVM: x86: fix DR6 delivery for various cases of #DB injection
KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
This patch makes checkpatch happy for tabs
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A fix for unrecoverable SLB faults in the interrupt exit path, introduced by the
recent rewrite of interrupt exit in C.
Four fixes for our KUAP (Kernel Userspace Access Prevention) support on 64-bit.
These are all fairly minor with the exception of the change to evaluate the
get/put_user() arguments before we enable user access, which reduces the amount
of code we run with user access enabled.
A fix for our secure boot IMA rules, if enforcement of module signatures is
enabled at runtime rather than build time.
A fix to our 32-bit VDSO clock_getres() which wasn't falling back to the syscall
for unknown clocks.
A build fix for CONFIG_PPC_KUAP_DEBUG on 32-bit BookS, and another for 40x.
Thanks to:
Christophe Leroy, Hugh Dickins, Nicholas Piggin, Aurelien Jarno, Mimi Zohar,
Nayna Jain.
-----BEGIN PGP SIGNATURE-----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=XkA+
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for unrecoverable SLB faults in the interrupt exit path,
introduced by the recent rewrite of interrupt exit in C.
- Four fixes for our KUAP (Kernel Userspace Access Prevention) support
on 64-bit. These are all fairly minor with the exception of the
change to evaluate the get/put_user() arguments before we enable user
access, which reduces the amount of code we run with user access
enabled.
- A fix for our secure boot IMA rules, if enforcement of module
signatures is enabled at runtime rather than build time.
- A fix to our 32-bit VDSO clock_getres() which wasn't falling back to
the syscall for unknown clocks.
- A build fix for CONFIG_PPC_KUAP_DEBUG on 32-bit BookS, and another
for 40x.
Thanks to: Christophe Leroy, Hugh Dickins, Nicholas Piggin, Aurelien
Jarno, Mimi Zohar, Nayna Jain.
* tag 'powerpc-5.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/40x: Make more space for system call exception
powerpc/vdso32: Fallback on getres syscall when clock is unknown
powerpc/32s: Fix build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/ima: Fix secure boot rules in ima arch policy
powerpc/64s/kuap: Restore AMR in fast_interrupt_return
powerpc/64s/kuap: Restore AMR in system reset exception
powerpc/64/kuap: Move kuap checks out of MSR[RI]=0 regions of exit code
powerpc/64s: Fix unrecoverable SLB crashes due to preemption check
powerpc/uaccess: Evaluate macro arguments once, before user access is allowed
Currently informational messages within block trace do not have PID
information of the process reporting the message included. With BFQ it
is sometimes useful to have the information and there's no good reason
to omit the information from the trace. So just fill in pid information
when generating note message.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This round of fixes is almost exclusively device tree changes,
with trivial defconfig fixes and one compiler warning fix
added in.
A number of patches are to fix dtc warnings, in particular on
Amlogic, i.MX and Rockchips.
Other notable changes include:
Renesas:
- Fix a wrong clock configuration on R-Mobile A1,
- Fix IOMMU support on R-Car V3H
Allwinner
- Multiple audio fixes
Qualcomm
- Use a safe CPU voltage on MSM8996
- Fixes to match a late audio driver change
Rockchip:
- Some fixes for the newly added Pinebook Pro
NXP i.MX:
- Fix I2C1 pinctrl configuration for i.MX27 phytec-phycard board.
- Fix imx6dl-yapp4-ursa board Ethernet connection.
OMAP:
- A regression fix for non-existing can device on am534x-idk
- Fix flakey wlan on droid4 where some devices would not connect
at all because of internal pull being used with an external pull
- Fix occasional missed wake-up events on droid4 modem uart
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=fXzR
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC/dt fixes from Arnd Bergmann:
"This round of fixes is almost exclusively device tree changes, with
trivial defconfig fixes and one compiler warning fix added in.
A number of patches are to fix dtc warnings, in particular on Amlogic,
i.MX and Rockchips.
Other notable changes include:
Renesas:
- Fix a wrong clock configuration on R-Mobile A1
- Fix IOMMU support on R-Car V3H
Allwinner
- Multiple audio fixes
Qualcomm
- Use a safe CPU voltage on MSM8996
- Fixes to match a late audio driver change
Rockchip:
- Some fixes for the newly added Pinebook Pro
NXP i.MX:
- Fix I2C1 pinctrl configuration for i.MX27 phytec-phycard board
- Fix imx6dl-yapp4-ursa board Ethernet connection
OMAP:
- A regression fix for non-existing can device on am534x-idk
- Fix flakey wlan on droid4 where some devices would not connect at
all because of internal pull being used with an external pull
- Fix occasional missed wake-up events on droid4 modem uart"
* tag 'arm-soc-fixes-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits)
ARM: dts: iwg20d-q7-dbcm-ca: Remove unneeded properties in hdmi@39
ARM: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
arm64: defconfig: add MEDIA_PLATFORM_SUPPORT
arm64: defconfig: ARCH_R8A7795: follow changed config symbol name
arm64: defconfig: add DRM_DISPLAY_CONNECTOR
arm64: defconfig: DRM_DUMB_VGA_DAC: follow changed config symbol name
ARM: oxnas: make ox820_boot_secondary static
ARM: dts: r8a7740: Add missing extal2 to CPG node
ARM: dts: omap4-droid4: Fix occasional lost wakeirq for uart1
ARM: dts: omap4-droid4: Fix flakey wlan by disabling internal pull for gpio
arm64: dts: allwinner: a64: Remove unused SPDIF sound card
arm64: dts: allwinner: a64: pinetab: Fix cpvdd supply name
arm64: dts: meson-g12: remove spurious blank line
arm64: dts: meson-g12b-khadas-vim3: add missing frddr_a status property
arm64: dts: meson-g12-common: fix dwc2 clock names
arm64: dts: meson-g12b-ugoos-am6: fix usb vbus-supply
arm64: dts: freescale: imx8mp: update input_val for AUDIOMIX_BIT_STREAM
ARM: dts: r7s9210: Remove bogus clock-names from OSTM nodes
ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsi
...
-----BEGIN PGP SIGNATURE-----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=5rIo
-----END PGP SIGNATURE-----
Merge tag 'block-5.7-2020-05-16' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Just a single NVMe pull in here, with a single fix for a missing DMA
read memory barrier for completions"
* tag 'block-5.7-2020-05-16' of git://git.kernel.dk/linux-block:
nvme-pci: dma read memory barrier for completions
- Pad lock register on Intel Sunrisepoint had the wrong offset.
- Fix pin config setting for the Baytrail GPIO chip.
- Fix a compilation warning in the Mediatek driver.
- Fix a function group name in the Actions driver.
- Fix a behaviour bug in the edge polarity code in the Qualcomm
driver.
- Add a missing spinlock in the Intel Cherryview driver.
- Add affinity callbacks to the Qualcomm MSMGPIO chip.
-----BEGIN PGP SIGNATURE-----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=4hwX
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"A bunch of pin control fixes, some a bit overly ripe, sorry about
that. We have important systems like Intel laptops and Qualcomm mobile
chips covered.
- Pad lock register on Intel Sunrisepoint had the wrong offset
- Fix pin config setting for the Baytrail GPIO chip
- Fix a compilation warning in the Mediatek driver
- Fix a function group name in the Actions driver
- Fix a behaviour bug in the edge polarity code in the Qualcomm
driver
- Add a missing spinlock in the Intel Cherryview driver
- Add affinity callbacks to the Qualcomm MSMGPIO chip"
* tag 'pinctrl-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Add affinity callbacks to msmgpio IRQ chip
pinctrl: cherryview: Add missing spinlock usage in chv_gpio_irq_handler
pinctrl: qcom: fix wrong write in update_dual_edge
pinctrl: actions: fix function group name for i2c0_group
pinctrl: mediatek: remove shadow variable declaration
pinctrl: baytrail: Enable pin configuration setting for GPIO chip
pinctrl: sunrisepoint: Fix PAD lock register offset for SPT-H
-----BEGIN PGP SIGNATURE-----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=kqDx
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.7-2020-05-15' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two small fixes that should go into this release:
- Check and handle zero length splice (Pavel)
- Fix a regression in this merge window for fixed files used with
polled block IO"
* tag 'io_uring-5.7-2020-05-15' of git://git.kernel.dk/linux-block:
io_uring: polled fixed file must go through free iteration
io_uring: fix zero len do_splice()
The MediaTek MT7623 SoC contains a Mali-450, so add a compatible for it
and define its own vendor-specific properties.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/efeadefe3895bcadf1d2e9847b82206dd8c7ec35.1563867856.git.ryder.lee@mediatek.com
[mb: move to yaml file]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Return error code to client if send message fail,
so that client has chance to error handling.
Fixes: 576f1b4bc8 ("soc: mediatek: Add Mediatek CMDQ helper")
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://lore.kernel.org/r/1583664775-19382-6-git-send-email-dennis-yc.hsieh@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The variable no longer does anything.
It should have been removed with commit 2e036804d7 ("iio: buffer: remove
'scan_el_attrs' attribute group from buffer struct").
That was about the last time this was needed.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add driver for Atlas EZO line of sensors with initial support for
CO2 the sensor. This is effectively ASCII strings proxied over I2C
due to these series of sensors being by default UART.
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
