The SBU and HSL orientation may be fixed/static from the mux
PoW. Apparently the retimer may take care of the orientation
of these lines. Handling the static SBU (AUX) and HSL
orientation with device properties.
If the SBU orientation is static, a device property
"sbu-orintation" can be used. When the property exists, the
driver always sets the SBU orientation according to the
property value, and when it's not set, the driver uses the
cable plug orientation with SBU.
And with static HSL orientation, "hsl-orientation" device
property can be used in the same way.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200507150900.12102-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now we don't report to user-space a role switch when doing a
usb_role_switch_set_role() despite having registered the uevent callbacks.
This patch switches on the notifications allowing user-space to see
role-switch change notifications and subsequently determine the current
controller data-role.
example:
PFX=/devices/platform/soc/78d9000.usb/ci_hdrc.0
root@somebox# udevadm monitor -p
KERNEL[49.894994] change $PFX/usb_role/ci_hdrc.0-role-switch (usb_role)
ACTION=change
DEVPATH=$PFX/usb_role/ci_hdrc.0-role-switch
SUBSYSTEM=usb_role
DEVTYPE=usb_role_switch
USB_ROLE_SWITCH=ci_hdrc.0-role-switch
SEQNUM=2432
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Wen Yang <wenyang@linux.alibaba.com>
Cc: chenqiwu <chenqiwu@xiaomi.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20200508162937.2566818-1-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 7d9e6f5aeb ("usb: host: ohci-sm501: init genalloc for local memory")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200506135625.106910-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
mv_ehci_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200508114305.15740-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete unused initialized value, because 'retval' will be assigined
by the function mv_ehci_enable(). And delete the extra blank lines.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200508142136.4232-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the defined variable "dev" to make the code cleaner. And
delete an extra blank line.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200508144024.7836-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scsi_get_host_dev() will create a virtual device such that either
the target id is ignored from scanning (if 'this_id' is set to
something which can be reached during scanning) or if the driver
needs a scsi device for the HBA to send commands to.
Neither is true for sierra-ms; 'this_id' remains at the default
value '-1' and the created device is never ever used within
the driver.
So kill it.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200505143019.57418-1-hare@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to have the 'void __iomem *dma_base_addr' variable
static since new value always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200505101353.195446-1-yuehaibing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We need to release the tx_lock on the error path before returning.
Fixes: d1c015b4ef ("staging: wfx: rewrite wfx_hw_scan()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512083656.GA251760@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the "gb_tty_set_termios" function the "newline" variable is declared
but not initialized. So the "flow_control" member is not initialized and
the OR / AND operations with itself results in an undefined value in
this member.
The purpose of the code is to set the flow control type, so remove the
OR / AND self operator and set the value directly.
Addresses-Coverity-ID: 1374016 ("Uninitialized scalar variable")
Fixes: e55c25206d ("greybus: uart: Handle CRTSCTS flag in termios")
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200510101426.23631-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function. Also
removed var 'rv' since we can use 'err' instead.
Fixes: 7dc7967fc3 ("staging: kpc2000: add initial set of Daktronics drivers")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200506134735.102041-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200507185318.GA14393@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the start of the "vnt_rf_set_txpower" function the "power" variable
is set at most to VNT_RF_MAX_POWER (hex = 0x3f, dec = 63). Then, in the
switch statement there are four comparisons with the "power" variable
against AL7230_PWR_IDX_LEN (dec = 64), VT3226_PWR_IDX_LEN (dec = 64),
VT3342_PWR_IDX_LEN (dec = 64). Due to all the commented comparisons are
to check if the "power" variable is "greater than or equal" to 64, this
never happens. So, remove the logically dead code.
Also, remove all the defines that are no longer required.
Addresses-Coverity-ID: 1230228 ("Logically dead code")
Fixes: f53d9f12c5 ("staging: vt6656: rf.c additional power.")
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Link: https://lore.kernel.org/r/20200510090950.7633-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rsvtime is the time needed in firmware to process the received
frame time in firmware so they can be the same as vnt_get_rts_duration
or vnt_get_cts_duration where appropriate.
The rts_rrv_time are now all the same timing in vnt_rxtx_rts.
So vnt_get_rtscts_rsvtime_le and and vnt_get_frame_time are no longer
required.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/4c0fe356-7e08-bf66-58b7-5ab683ba9536@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
split vnt_get_rtscts_duration_le into vnt_get_rts_duration and
vnt_get_cts_duration.
The duration's are all the same in vnt_rxtx_rts_g_head.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/d2983161-7935-48ce-c0ca-a26ebafa3997@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ieee80211_generic_frame_duration is the mac80211 equivalent to
vnt_get_rsvtime use this to get our frame time.
There is a change where there is rrv_time_a and rrv_time_b
the frame duration is always the same so both are equal.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/acff7fcc-0add-652b-7d07-22001b641257@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently channel is being sanity checked after it has been used as
an index into some arrays. Fix this by moving the sanity check of
channel before the arrays are indexed with it.
Addresses-Coverity: ("Negative array index read")
Fixes: 59ed0480b9 ("Staging: most: replace pr_*() functions by dev_*()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200507150652.52238-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field 'channel_number' from the structs hif_ind_rx and hif_req_start
is a __le32. Sparse complains this field is not always correctly
accessed:
drivers/staging/wfx/data_rx.c:95:55: warning: incorrect type in argument 1 (different base types)
drivers/staging/wfx/data_rx.c:95:55: expected int chan
drivers/staging/wfx/data_rx.c:95:55: got restricted __le16 const [usertype] channel_number
However, the value of channel_number cannot be greater than 14 (this
device only support 2.4Ghz band). So, we only have to access to the
least significant byte. It is finally easier to declare it as an array
of bytes and only access to the first one.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-17-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field 'num_tx_confs' from the struct hif_cnf_multi_transmit is a
__le32. Sparse complains this field is not always correctly accessed:
drivers/staging/wfx/hif_rx.c:82:9: warning: restricted __le32 degrades to integer
drivers/staging/wfx/hif_rx.c:87:29: warning: restricted __le32 degrades to integer
However, the value of num_tx_confs cannot be greater than 15. So, we
only have to access to the least significant byte. It is finally easier
to declare it as an array of bytes and only access to the first one.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-16-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field 'status' appears in most of structs returned by the hardware.
This field is encoded as little endian. Sparse complains this field is
not always correctly accessed:
drivers/staging/wfx/data_rx.c:53:16: warning: restricted __le32 degrades to integer
drivers/staging/wfx/data_rx.c:84:16: warning: restricted __le32 degrades to integer
drivers/staging/wfx/data_tx.c:526:24: warning: restricted __le32 degrades to integer
drivers/staging/wfx/data_tx.c:569:23: warning: restricted __le32 degrades to integer
drivers/staging/wfx/hif_rx.c:128:33: warning: restricted __le32 degrades to integer
drivers/staging/wfx/./traces.h:401:1: warning: restricted __le32 degrades to integer
drivers/staging/wfx/./traces.h:401:1: warning: restricted __le32 degrades to integer
In most of cases, this field is only compared with HIF_STATUS values.
Finally, it is more convenient to solve the problem by defining the
HIF_STATUS values directly in little endian.
It is also the right time to make some clean up in the HIF_STATUS names.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-15-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse complains about the accesses to the field 'len' from struct hif_msg:
drivers/staging/wfx/bh.c:88:32: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:88:32: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:93:32: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:93:32: warning: cast to restricted __le16
drivers/staging/wfx/bh.c:93:32: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:121:25: warning: incorrect type in argument 2 (different base types)
drivers/staging/wfx/bh.c:121:25: expected unsigned int len
drivers/staging/wfx/bh.c:121:25: got restricted __le16 [usertype] len
drivers/staging/wfx/hif_rx.c:27:22: warning: restricted __le16 degrades to integer
drivers/staging/wfx/hif_rx.c:347:39: warning: incorrect type in argument 7 (different base types)
drivers/staging/wfx/hif_rx.c:347:39: expected unsigned int [usertype] len
drivers/staging/wfx/hif_rx.c:347:39: got restricted __le16 const [usertype] len
drivers/staging/wfx/hif_rx.c:365:39: warning: incorrect type in argument 7 (different base types)
drivers/staging/wfx/hif_rx.c:365:39: expected unsigned int [usertype] len
drivers/staging/wfx/hif_rx.c:365:39: got restricted __le16 const [usertype] len
drivers/staging/wfx/./traces.h:195:1: warning: incorrect type in assignment (different base types)
drivers/staging/wfx/./traces.h:195:1: expected int msg_len
drivers/staging/wfx/./traces.h:195:1: got restricted __le16 const [usertype] len
drivers/staging/wfx/./traces.h:195:1: warning: incorrect type in assignment (different base types)
drivers/staging/wfx/./traces.h:195:1: expected int msg_len
drivers/staging/wfx/./traces.h:195:1: got restricted __le16 const [usertype] len
drivers/staging/wfx/debug.c:319:20: warning: restricted __le16 degrades to integer
drivers/staging/wfx/secure_link.c:85:27: warning: restricted __le16 degrades to integer
drivers/staging/wfx/secure_link.c:85:27: warning: restricted __le16 degrades to integer
Indeed, the attribute len is little-endian. We have to take to the
endianness when we access it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-14-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct hif_ind_startup is received from the hardware. So it is
declared as little endian. However, it is also stored in the main driver
structure and used on different places in the driver. Sparse complains
about that:
drivers/staging/wfx/data_tx.c:388:43: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:199:9: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:221:62: warning: restricted __le16 degrades to integer
In order to make Sparse happy and to keep access from the driver easy,
this patch declare hif_ind_startup with native endianness.
On reception of this struct, this patch takes care to do byte-swap and
keep Sparse happy.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-13-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field packet_id is not interpreted by the device. It is only used as
identifier for the device answer. So it is not necessary to declare it
little endian. It fixes some warnings raised by Sparse without
complexifying the code.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-12-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The attribute ps_mode_error is little-endian. We have to take to the
endianness when we access it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-9-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The structs hif_{req,cnf}_read_mib contain only little endian values.
Thus, it is necessary to fix byte ordering before to use them.
Especially, sparse detected wrong accesses to fields mib_id and length.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-8-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct hif_cnf_tx contains only little endian values. Thus, it is
necessary to fix byte ordering before to use them. Especially, sparse
detected wrong access to fields media_delay and tx_queue_delay.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct hif_rx_stats contains only little endian values. Thus, it is
necessary to fix byte ordering before to use them.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field wakeup_period_max from struct hif_mib_beacon_wake_up_period is
a u8. So, assigning it a __le16 produces a nasty bug on big-endian
architectures.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse detects that le16_to_cpup() expects a __le16 * as argument.
Change the cast operator to be compliant with sparse.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, fpu__clear() clears all fpregs and xstates. Once XSAVES
supervisor states are introduced, supervisor settings (e.g. CET xstates)
must remain active for signals; It is necessary to have separate functions:
- Create fpu__clear_user_states(): clear only user settings for signals;
- Create fpu__clear_all(): clear both user and supervisor settings in
flush_thread().
Also modify copy_init_fpstate_to_fpregs() to take a mask from above two
functions.
Remove obvious side-comment in fpu__clear(), while at it.
[ bp: Make the second argument of fpu__clear() bool after requesting it
a bunch of times during review.
- Add a comment about copy_init_fpstate_to_fpregs() locking needs. ]
Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200512145444.15483-6-yu-cheng.yu@intel.com
There is no need to explicitly free memory that have been 'devm_kzalloc'ed.
Simplify the probe function accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Green Wan <green.wan@sifive.com>
Link: https://lore.kernel.org/r/20200501100824.126534-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix the following coccicheck warning:
drivers/dma/qcom/hidma.c:553:1-17: WARNING: Assignment of 0/1 to bool
variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked By: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20200504113406.41530-1-yanaijie@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In case of dmatest is built-in and no channel was configured test
doesn't run with:
dmatest: Could not start test, no channels configured
Even though description to "channel" parameter claims that default is
any.
Add default channel back as it used to be rather than reject test with
no channel configuration.
Fixes: d53513d5dc ("dmaengine: dmatest: Add support for multi channel testing)
Reported-by: Dijil Mohan <Dijil.Mohan@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Link: https://lore.kernel.org/r/20200429071522.58148-1-vladimir.murzin@arm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The kernel coding style promotes the use of kernel types (u8, u16, u32,
etc...) instead of the C99 ones.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200505123757.39506-16-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel coding style expects no space after cast operator. This patch
make the wfx driver compliant with this rule.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200505123757.39506-15-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
