Re-parenting to intermediate clock is supported now by the clock driver
and thus there is no need in a customized CPUFreq driver, all that code
is common for both Tegra20 and Tegra30. The available CPU freqs are now
specified in device-tree in a form of OPPs, all users should update their
device-trees.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
PLLX may be kept disabled if cpufreq driver selects some other clock for
CPU. In that case PLLX will be disabled later in the resume path by the
CLK driver, which also can enable PLLX if necessary by itself. Thus there
is no need to enable PLLX early during resume. Tegra114/124 CLK drivers do
not manage PLLX on resume and thus they are left untouched by this patch.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The early-resume code shall not switch CPU to PLLX because PLLX
configuration could be unstable or PLLX should be simply disabled if
CPU enters into suspend running off some other PLL (the case if CPUFREQ
driver is active). The actual burst policy is restored by the clock
drivers.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The PL310 Auxiliary Control Register shouldn't have the "Full line of
zero" optimization bit being set before L2 cache is enabled. The L2X0
driver takes care of enabling the optimization by itself.
This patch fixes a noisy error message on Tegra20 and Tegra30 telling
that cache optimization is erroneously enabled without enabling it for
the CPU:
L2C-310: enabling full line of zeros but not enabled in Cortex-A9
Cc: <stable@vger.kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The new Tegra CPU Idle driver now has a unified code path for the coupled
CC6 (LP2) state, this allows to enable the deepest idling state on Tegra30
SoC where the whole CPU cluster is power-gated.
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
ASUS TF300T device may not work properly if firmware is asked to fully
re-initialize L2 cache after resume from LP2 suspend. The downstream
kernel of TF300T uses different opcode to enable cache after resuming
from LP2, this opcode also works fine on Nexus 7 and Ouya devices.
Supposedly, this may be needed by an older firmware versions.
Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Downstream kernel of ASUS TF300T sets r0 to #3. There is no explanation in
downstream code whether this is really needed and some of T30 downstream
kernels have and explicit comment telling that all arguments are ignored
by firmware. Let's take a safe side by replicating behavior of the TF300T
downstream kernel. This change works fine on Ouya and Nexus 7 devices.
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
ASUS TF300T device may not work properly if firmware is asked to fully
re-initialize L2 cache after resume from LP2 suspend. The downstream
kernel of TF300T uses different opcode to enable cache after resuming
from LP2, this opcode also works fine on Nexus 7 and Ouya devices.
Supposedly, this may be needed by an older firmware versions.
Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
mt6797_afe_pcm_dev_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200506143009.13368-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The original Memory Bandwidth Monitoring (MBM) architectural
definition defines counters of up to 62 bits in the
IA32_QM_CTR MSR while the first-generation MBM implementation
uses statically defined 24 bit counters.
The MBM CPUID enumeration properties have been expanded to include
the MBM counter width, encoded as an offset from 24 bits.
While eight bits are available for the counter width offset IA32_QM_CTR
MSR only supports 62 bit counters. Add a sanity check, with warning
printed when encountered, to ensure counters cannot exceed the 62 bit
limit.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/69d52abd5b14794d3a0f05ba7c755ed1f4c0d5ed.1588715690.git.reinette.chatre@intel.com
The original Memory Bandwidth Monitoring (MBM) architectural
definition defines counters of up to 62 bits in the
IA32_QM_CTR MSR while the first-generation MBM implementation
uses statically defined 24 bit counters.
Expand the MBM CPUID enumeration properties to include the MBM
counter width. The previously undefined EAX output register contains,
in bits [7:0], the MBM counter width encoded as an offset from
24 bits. Enumerating this property is only specified for Intel
CPUs.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/afa3af2f753f6bc301fb743bc8944e749cb24afa.1588715690.git.reinette.chatre@intel.com
The original Memory Bandwidth Monitoring (MBM) architectural
definition defines counters of up to 62 bits in the IA32_QM_CTR MSR,
and the first-generation MBM implementation uses 24 bit counters.
Software is required to poll at 1 second or faster to ensure that
data is retrieved before a counter rollover occurs more than once
under worst conditions.
As system bandwidths scale the software requirement is maintained with
the introduction of a per-resource enumerable MBM counter width.
In preparation for supporting hardware with an enumerable MBM counter
width the current globally static MBM counter width is moved to a
per-resource MBM counter width. Currently initialized to 24 always
to result in no functional change.
In essence there is one function, mbm_overflow_count() that needs to
know the counter width to handle rollovers. The static value
used within mbm_overflow_count() will be replaced with a value
discovered from the hardware. Support for learning the MBM counter
width from hardware is added in the change that follows.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/e36743b9800f16ce600f86b89127391f61261f23.1588715690.git.reinette.chatre@intel.com
Cache and memory bandwidth monitoring are features that are part of
x86 CPU resource control that is supported by the resctrl subsystem.
The monitoring properties are obtained via CPUID from every CPU
and only used within the resctrl subsystem where the properties are
only read from boot_cpu_data.
Obtain the monitoring properties once, placed in boot_cpu_data, via the
->c_bsp_init() helpers of the vendors that support X86_FEATURE_CQM_LLC.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/6d74a6ac3e69f4b7a8b4115835f9455faf0f468d.1588715690.git.reinette.chatre@intel.com
The cache and memory bandwidth monitoring properties are read using
CPUID on every CPU. After the information is read from the system a
sanity check is run to
(1) ensure that the RMID data is initialized for the boot CPU in case
the information was not available on the boot CPU and
(2) the boot CPU's RMID is set to the minimum of RMID obtained
from all CPUs.
Every known platform that supports resctrl has the same maximum RMID
on all CPUs. Both sanity checks found in x86_init_cache_qos() can thus
safely be removed.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/c9a3b60d34091840c8b0bd1c6fab15e5ba92cb17.1588715690.git.reinette.chatre@intel.com
The function determining a platform's support and properties of cache
occupancy and memory bandwidth monitoring (properties of
X86_FEATURE_CQM_LLC) can be found among the common CPU code. After
the feature's properties is populated in the per-CPU data the resctrl
subsystem is the only consumer (via boot_cpu_data).
Move the function that obtains the CPU information used by resctrl to
the resctrl subsystem and rename it from init_cqm() to
resctrl_cpu_detect(). The function continues to be called from the
common CPU code. This move is done in preparation of the addition of some
vendor specific code.
No functional change.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/38433b99f9d16c8f4ee796f8cc42b871531fa203.1588715690.git.reinette.chatre@intel.com
asm/resctrl_sched.h is dedicated to the code used for configuration
of the CPU resource control state when a task is scheduled.
Rename resctrl_sched.h to resctrl.h in preparation of additions that
will no longer make this file dedicated to work done during scheduling.
No functional change.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/6914e0ef880b539a82a6d889f9423496d471ad1d.1588715690.git.reinette.chatre@intel.com
Here's a fix adding a missing input sanity check and a new modem device
id.
Both have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCXrLNGgAKCRALxc3C7H1l
CL9cAQDKplqMiVKST+Zmkj4tWjNT1cyCaUd0Ph5A6G5c3mp9KAD9FVmA8hs2ZJCe
5EbgjBaQaKcoRCTb+Gu2OZxX3AIt3ww=
=0Lm7
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.7-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.7-rc5
Here's a fix adding a missing input sanity check and a new modem device
id.
Both have been in linux-next with no reported issues.
* tag 'usb-serial-5.7-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: qcserial: Add DW5816e support
USB: serial: garmin_gps: add sanity checking for data length
As per POSIX, the correct spelling is EACCES:
include/uapi/asm-generic/errno-base.h:#define EACCES 13 /* Permission denied */
Fixes: b8f7442bc4 ("CIFS: refactor cifs_get_inode_info()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a client is added it isn't allowed to fail, but all the client's have
various failure paths within their add routines.
This creates the very fringe condition where the client was added, failed
during add and didn't set the client_data. The core code will then still
call other client_data centric ops like remove(), rename(), get_nl_info(),
and get_net_dev_by_params() with NULL client_data - which is confusing and
unexpected.
If the add() callback fails, then do not call any more client ops for the
device, even remove.
Remove all the now redundant checks for NULL client_data in ops callbacks.
Update all the add() callbacks to return error codes
appropriately. EOPNOTSUPP is used for cases where the ULP does not support
the ib_device - eg because it only works with IB.
Link: https://lore.kernel.org/r/20200421172440.387069-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix to return negative error code -ENOMEM from the dma mapping error
handling case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200506125607.90952-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following coccicheck warning:
drivers/spi/spi-armada-3700.c:283:8-11: Unneeded variable: "ret". Return
"0" on line 315
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200506061911.19923-1-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Snoop interface is not used. Remove it.
Link: https://lore.kernel.org/r/20200413132408.931084-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix the following coccicheck warning:
drivers/regulator/db8500-prcmu.c:184:1-17: WARNING: Assignment of 0/1 to
bool variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200506061726.19289-1-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Unmask/enable AUX interrupts on all ports on TGL+. So far the interrupts
worked only on port A, which meant each transaction on other ports took
10ms.
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504075828.20348-1-imre.deak@intel.com
(cherry picked from commit 054318c7e3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Simultaneous capture on dmic and headset mic is having
issue with high hw_level being reported.
Issue Can be reproduced by:
arecord -D hw:2,0 -f dat -d 60 /tmp/test0 &
arecord -D hw:2,2 -f dat -d 60 /tmp/test1 &
cat /proc/asound/card2/pcm?c/sub0/status
Actual issue is :
When we open one capture stream on one instance lets say I2S_SP and then
once again if we open other capture on other instance lets say I2S_BT while
first capture is in progress and when we try to read the status of both
running instances by below command cat /proc/asound/card2/pcm?c/sub0/status
we observe that avail_max is being doubled on first opened
capture(I2S_SP in the example).
This is because our previous implementation was like when any instance is
opened it gets initialized in dma_open irrespective of on what instance it
called open.
For example:
First I2S_SP called opened it initializes both SP/BT capture streams
irrespective of on which instance the stream opened.next time I2S_BT
called opened and it initializes both SP/BT this corrupts the behaviour .
So with this patch the stream gets initialized only on specific instance
when ever it gets opened calls hw_params.
This rectifies the issue.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200506102602.140790-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Populate sysfs and structs with reipl entries for nvme ipl type.
This allows specifying a target nvme device when rebooting/reipling.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Recognize IPL Block's Ipl Type of "nvme". Populate related structs and sysfs
entries.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reject the new event which has NULL location for kprobes.
For kprobes, user must specify at least the location.
Link: http://lkml.kernel.org/r/158779376597.6082.1411212055469099461.stgit@devnote2
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 2a588dd1d5 ("tracing: Add kprobe event command generation functions")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix boottime kprobe events to use API correctly for
multiple events.
For example, when we set a multiprobe kprobe events in
bootconfig like below,
ftrace.event.kprobes.myevent {
probes = "vfs_read $arg1 $arg2", "vfs_write $arg1 $arg2"
}
This cause an error;
trace_boot: Failed to add probe: p:kprobes/myevent (null) vfs_read $arg1 $arg2 vfs_write $arg1 $arg2
This shows the 1st argument becomes NULL and multiprobes
are merged to 1 probe.
Link: http://lkml.kernel.org/r/158779375766.6082.201939936008972838.stgit@devnote2
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 29a1548105 ("tracing: Change trace_boot to use kprobe_event interface")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix a typo that resulted in an unnecessary double
initialization to addr.
Link: http://lkml.kernel.org/r/158779374968.6082.2337484008464939919.stgit@devnote2
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Fixes: c7411a1a12 ("tracing/kprobe: Check whether the non-suffixed symbol is notrace")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If there is a bootconfig data in the tail of initrd/initramfs,
initrd image sanity check caused an error while decompression
stage as follows.
[ 0.883882] Unpacking initramfs...
[ 2.696429] Initramfs unpacking failed: invalid magic at start of compressed archive
This error will be ignored if CONFIG_BLK_DEV_RAM=n,
but CONFIG_BLK_DEV_RAM=y the kernel failed to mount rootfs
and causes a panic.
To fix this issue, shrink down the initrd_end for removing
tailing bootconfig data while boot the kernel.
Link: http://lkml.kernel.org/r/158788401014.24243.17424755854115077915.stgit@devnote2
Cc: Borislav Petkov <bp@alien8.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: 7684b8582c ("bootconfig: Load boot config from the tail of initrd")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The assignment of the PCI device multifunction attribute
is set during the PCI device probe.
There is no need to set it here.
Let's do it right and remove this assignment.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
s390 uses the UTS_MACHINE defined arch/s390/Makefile as follows:
UTS_MACHINE := s390x
We do not need to pass the fixed string from the command line.
Hard-code user_regset_view::name, like many other architectures do.
Link: https://lkml.kernel.org/r/20200413013113.8529-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Sphinx 2.4.4 produces this warning:
Documentation/admin-guide/media/ipu3.rst:235: WARNING: Title underline too short.
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rework the documentation to make it easier for the reader to understand
the differences in behavior of this ioctl between MC and non-MC drivers.
Note the addition of the 'video-node-centric' and 'MC-centric' terms to
help understand what the IO_MC capability really means.
Also mention in the beginning that mbus_code is one of the fields that
application should initialize, and add META_OUTPUT as one of the types that
this ioctl supports (that was never added here when the META_OUTPUT buffer
type was added).
Finally document that EINVAL will be returned if mbus_code is unsupported.
Fixes: e5b6b07a1b ("media: v4l2: Extend VIDIOC_ENUM_FMT to support MC-centric devices")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When the MFD driver is a loadable module, the watchdog driver fails
to get linked into the kernel:
drivers/watchdog/iTCO_wdt.o: In function `update_no_reboot_bit_pmc':
iTCO_wdt.c:(.text+0x54f): undefined reference to `intel_pmc_gcr_update'
The code is written to support operation without the MFD driver, so
add a Kconfig dependency that allows this, while disallowing the watchdog
to be built-in when the MFD driver is a module.
Fixes: 25f1ca31e2 ("platform/x86: intel_pmc_ipc: Convert to MFD")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Support 32-bit access for the TX/RX hold registers UTXH and URXH.
This is required for some newer SoCs.
Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested on Odroid HC1 (Exynos5422):
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200506080242.18623-3-hyunki00.koo@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a description for reg-io-width options for the samsung serial
UART peripheral.
Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200506080242.18623-2-hyunki00.koo@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch change the name of macro for general usage.
Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested on Odroid HC1 (Exynos5422):
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200506080242.18623-1-hyunki00.koo@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 3d9231e698
Rajendra writes:
Greg, there are other patches in the series which have a
dependency on this patch [1] would it be possible for you to
drop this patch and instead ack it so it can be taken via the
msm tree?
So dropping it from here.
Reported-by: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Akash Asthana <akashast@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are circumstances when running nested under z/VM that would trigger a
WARN_ON_ONCE. Remove the WARN_ON_ONCE. Long term we certainly want to make this
code more robust and flexible, but just returning instead of WARNING makes
guest bootable again.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=cSBf
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fix for running nested uner z/VM
There are circumstances when running nested under z/VM that would trigger a
WARN_ON_ONCE. Remove the WARN_ON_ONCE. Long term we certainly want to make this
code more robust and flexible, but just returning instead of WARNING makes
guest bootable again.
KVM_CAP_SET_GUEST_DEBUG should be supported for x86 however it's not declared
as supported. My wild guess is that userspaces like QEMU are using "#ifdef
KVM_CAP_SET_GUEST_DEBUG" to check for the capability instead, but that could be
wrong because the compilation host may not be the runtime host.
The userspace might still want to keep the old "#ifdef" though to not break the
guest debug on old kernels.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200505154750.126300-1-peterx@redhat.com>
[Do the same for PPC and s390. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I got this error when building kvm selftests:
/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: multiple definition of `current_evmcs'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: first defined here
/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: multiple definition of `current_vp_assist'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: first defined here
I think it's because evmcs.h is included both in a test file and a lib file so
the structs have multiple declarations when linking. After all it's not a good
habit to declare structs in the header files.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200504220607.99627-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using CPUID data can be useful for the processor compatibility
check, but that's it. Using it to compute guest-reserved bits
can have both false positives (such as LA57 and UMIP which we
are already handling) and false negatives: in particular, with
this patch we don't allow anymore a KVM guest to set CR4.PKE
when CR4.PKE is clear on the host.
Fixes: b9dd21e104 ("KVM: x86: simplify handling of PKRU")
Reported-by: Jim Mattson <jmattson@google.com>
Tested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clear CF and ZF in the VM-Exit path after doing __FILL_RETURN_BUFFER so
that KVM doesn't interpret clobbered RFLAGS as a VM-Fail. Filling the
RSB has always clobbered RFLAGS, its current incarnation just happens
clear CF and ZF in the processs. Relying on the macro to clear CF and
ZF is extremely fragile, e.g. commit 089dd8e531 ("x86/speculation:
Change FILL_RETURN_BUFFER to work with objtool") tweaks the loop such
that the ZF flag is always set.
Reported-by: Qian Cai <cai@lca.pw>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Fixes: f2fde6a5bc ("KVM: VMX: Move RSB stuffing to before the first RET after VM-Exit")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200506035355.2242-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set the V4L2_CAP_IO_MC capability flag to report this vimc
inputs/outputs are controlled by the media graph.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Set the V4L2_CAP_IO_MC capability flag and remove the driver specific
vidioc_enum_{input,output}, vidioc_g_{input,output} and
vidioc_s_{input,output} callbacks.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
