'refcount_t' is very useful for catching over/under flows. Convert the
SPAN agent objects to use it instead of 'int' for their reference count.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To the best of my knowledge, these debug prints were never used. Remove
them.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use a more meaningful name for parms() function.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use early return to avoid unnecessary nesting.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following coccicheck warning:
drivers/scsi/sgiwd93.c:190:2-3: Unneeded semicolon
Link: https://lore.kernel.org/r/20200421034029.28030-1-yanaijie@huawei.com
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
drivers/scsi/qla4xxx/ql4_os.c:969:3-4: Unneeded semicolon
Link: https://lore.kernel.org/r/20200421034038.28113-1-yanaijie@huawei.com
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
drivers/scsi/isci/isci.h:515:1-12: WARNING: Assignment of 0/1 to bool
variable
drivers/scsi/isci/isci.h:503:1-12: WARNING: Assignment of 0/1 to bool
variable
drivers/scsi/isci/isci.h:509:1-12: WARNING: Assignment of 0/1 to bool
variable
Link: https://lore.kernel.org/r/20200421034050.28193-1-yanaijie@huawei.com
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:948:4-5: Unneeded semicolon
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:968:4-5: Unneeded semicolon
Link: https://lore.kernel.org/r/20200421034019.27949-1-yanaijie@huawei.com
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
drivers/scsi/bfa/bfa_fcs_rport.c:2452:2-3: Unneeded semicolon
drivers/scsi/bfa/bfa_fcs_rport.c:1578:3-4: Unneeded semicolon
Link: https://lore.kernel.org/r/20200421033957.27783-1-yanaijie@huawei.com
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/bfa/bfa_svc.c: In function 'uf_recv':
drivers/scsi/bfa/bfa_svc.c:5520:17: warning:
variable 'fchs' set but not used [-Wunused-but-set-variable]
struct fchs_s *fchs;
^
Link: https://lore.kernel.org/r/20200418071057.96699-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This function does not need a return value since no callers depend on
it. Make it return void.
This also fixes the coccicheck warning:
drivers/scsi/snic/snic_ctl.c:163:5-8: Unneeded variable: "ret". Return
"0" on line 228
Link: https://lore.kernel.org/r/20200418070615.11603-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
drivers/scsi/mpt3sas/mpt3sas_base.c:4906:3-19: WARNING: NULL check
before some freeing functions is not needed.
Link: https://lore.kernel.org/r/20200418095850.34883-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
drivers/scsi/ipr.c:9533:2-18: WARNING: NULL check before some freeing
functions is not needed.
Link: https://lore.kernel.org/r/20200418095903.35118-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
drivers/scsi/bfa/bfa_fcs_lport.c:4361:3-4: Unneeded semicolon
Link: https://lore.kernel.org/r/20200418070553.11262-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch removes the iscsi_data_count structure and the
iscsit_do_rx_data() function because they are used only by rx_data()
Link: https://lore.kernel.org/r/20200424113913.17237-1-mlombard@redhat.com
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi_host_block() calls scsi_internal_device_block() for each scsi_device and
scsi_internal_device_block() calls blk_mq_quiesce_queue() for each LUN.
Since synchronize_rcu() is called from blk_mq_quiesce_queue(), this can cause
substantial slowdowns on systems with many LUNs.
Use scsi_internal_device_block_nowait() to implement scsi_host_block() so it
is sufficient to run synchronize_rcu() once. This is safe since SCSI does not
set the BLK_MQ_F_BLOCKING flag.
[mkp: commit desc and comment tweaks]
Link: https://lore.kernel.org/r/20200423020713.332743-1-ming.lei@redhat.com
Cc: Steffen Maier <maier@linux.ibm.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The '!=' expression itself is bool, no need to convert it to bool again.
This fixes the following coccicheck warning:
drivers/scsi/BusLogic.c:2240:46-51: WARNING: conversion to bool not
needed here
Link: https://lore.kernel.org/r/20200421034120.28433-1-yanaijie@huawei.com
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
drivers/scsi/megaraid/megaraid_sas_fusion.c:4242:6-16: WARNING:
Assignment of 0/1 to bool variable
drivers/scsi/megaraid/megaraid_sas_fusion.c:4786:1-29: WARNING:
Assignment of 0/1 to bool variable
drivers/scsi/megaraid/megaraid_sas_fusion.c:4791:1-29: WARNING:
Assignment of 0/1 to bool variable
drivers/scsi/megaraid/megaraid_sas_fusion.c:4716:1-29: WARNING:
Assignment of 0/1 to bool variable
drivers/scsi/megaraid/megaraid_sas_fusion.c:4721:1-29: WARNING:
Assignment of 0/1 to bool variable
Link: https://lore.kernel.org/r/20200421034111.28353-1-yanaijie@huawei.com
Acked-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Combine the pid_task and thes test has_group_leader_pid into a single
dereference by using pid_task(PIDTYPE_TGID).
This makes the code simpler and proof against needing to even think
about any shenanigans that de_thread might get up to.
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Alexey Gladkov <gladkov.alexey@gmail.com> writes:
Procfs modernization:
---------------------
Historically procfs was always tied to pid namespaces, during pid
namespace creation we internally create a procfs mount for it. However,
this has the effect that all new procfs mounts are just a mirror of the
internal one, any change, any mount option update, any new future
introduction will propagate to all other procfs mounts that are in the
same pid namespace.
This may have solved several use cases in that time. However today we
face new requirements, and making procfs able to support new private
instances inside same pid namespace seems a major point. If we want to
to introduce new features and security mechanisms we have to make sure
first that we do not break existing usecases. Supporting private procfs
instances will allow to support new features and behaviour without
propagating it to all other procfs mounts.
Today procfs is more of a burden especially to some Embedded, IoT,
sandbox, container use cases. In user space we are over-mounting null
or inaccessible files on top to hide files and information. If we want
to hide pids we have to create PID namespaces otherwise mount options
propagate to all other proc mounts, changing a mount option value in one
mount will propagate to all other proc mounts. If we want to introduce
new features, then they will propagate to all other mounts too, resulting
either maybe new useful functionality or maybe breaking stuff. We have
also to note that userspace should not workaround procfs, the kernel
should just provide a sane simple interface.
In this regard several developers and maintainers pointed out that
there are problems with procfs and it has to be modernized:
"Here's another one: split up and modernize /proc." by Andy Lutomirski [1]
Discussion about kernel pointer leaks:
"And yes, as Kees and Daniel mentioned, it's definitely not just dmesg.
In fact, the primary things tend to be /proc and /sys, not dmesg
itself." By Linus Torvalds [2]
Lot of other areas in the kernel and filesystems have been updated to be
able to support private instances, devpts is one major example [3].
Which will be used for:
1) Embedded systems and IoT: usually we have one supervisor for
apps, we have some lightweight sandbox support, however if we create
pid namespaces we have to manage all the processes inside too,
where our goal is to be able to run a bunch of apps each one inside
its own mount namespace, maybe use network namespaces for vlans
setups, but right now we only want mount namespaces, without all the
other complexity. We want procfs to behave more like a real file system,
and block access to inodes that belong to other users. The 'hidepid=' will
not work since it is a shared mount option.
2) Containers, sandboxes and Private instances of file systems - devpts case
Historically, lot of file systems inside Linux kernel view when instantiated
were just a mirror of an already created and mounted filesystem. This was the
case of devpts filesystem, it seems at that time the requirements were to
optimize things and reuse the same memory, etc. This design used to work but not
anymore with today's containers, IoT, hostile environments and all the privacy
challenges that Linux faces.
In that regards, devpts was updated so that each new mounts is a total
independent file system by the following patches:
"devpts: Make each mount of devpts an independent filesystem" by
Eric W. Biederman [3] [4]
3) Linux Security Modules have multiple ptrace paths inside some
subsystems, however inside procfs, the implementation does not guarantee
that the ptrace() check which triggers the security_ptrace_check() hook
will always run. We have the 'hidepid' mount option that can be used to
force the ptrace_may_access() check inside has_pid_permissions() to run.
The problem is that 'hidepid' is per pid namespace and not attached to
the mount point, any remount or modification of 'hidepid' will propagate
to all other procfs mounts.
This also does not allow to support Yama LSM easily in desktop and user
sessions. Yama ptrace scope which restricts ptrace and some other
syscalls to be allowed only on inferiors, can be updated to have a
per-task context, where the context will be inherited during fork(),
clone() and preserved across execve(). If we support multiple private
procfs instances, then we may force the ptrace_may_access() on
/proc/<pids>/ to always run inside that new procfs instances. This will
allow to specifiy on user sessions if we should populate procfs with
pids that the user can ptrace or not.
By using Yama ptrace scope, some restricted users will only be able to see
inferiors inside /proc, they won't even be able to see their other
processes. Some software like Chromium, Firefox's crash handler, Wine
and others are already using Yama to restrict which processes can be
ptracable. With this change this will give the possibility to restrict
/proc/<pids>/ but more importantly this will give desktop users a
generic and usuable way to specifiy which users should see all processes
and which user can not.
Side notes:
* This covers the lack of seccomp where it is not able to parse
arguments, it is easy to install a seccomp filter on direct syscalls
that operate on pids, however /proc/<pid>/ is a Linux ABI using
filesystem syscalls. With this change all LSMs should be able to analyze
open/read/write/close... on /proc/<pid>/
4) This will allow to implement new features either in kernel or
userspace without having to worry about procfs.
In containers, sandboxes, etc we have workarounds to hide some /proc
inodes, this should be supported natively without doing extra complex
work, the kernel should be able to support sane options that work with
today and future Linux use cases.
5) Creation of new superblock with all procfs options for each procfs
mount will fix the ignoring of mount options. The problem is that the
second mount of procfs in the same pid namespace ignores the mount
options. The mount options are ignored without error until procfs is
remounted.
Before:
proc /proc proc rw,relatime,hidepid=2 0 0
mount("proc", "/tmp/proc", "proc", 0, "hidepid=1") = 0
+++ exited with 0 +++
proc /proc proc rw,relatime,hidepid=2 0 0
proc /tmp/proc proc rw,relatime,hidepid=2 0 0
proc /proc proc rw,relatime,hidepid=1 0 0
proc /tmp/proc proc rw,relatime,hidepid=1 0 0
After:
proc /proc proc rw,relatime,hidepid=ptraceable 0 0
proc /proc proc rw,relatime,hidepid=ptraceable 0 0
proc /tmp/proc proc rw,relatime,hidepid=invisible 0 0
Introduced changes:
-------------------
Each mount of procfs creates a separate procfs instance with its own
mount options.
This series adds few new mount options:
* New 'hidepid=ptraceable' or 'hidepid=4' mount option to show only ptraceable
processes in the procfs. This allows to support lightweight sandboxes in
Embedded Linux, also solves the case for LSM where now with this mount option,
we make sure that they have a ptrace path in procfs.
* 'subset=pid' that allows to hide non-pid inodes from procfs. It can be used
in containers and sandboxes, as these are already trying to hide and block
access to procfs inodes anyway.
ChangeLog:
----------
* Rebase on top of v5.7-rc1.
* Fix a resource leak if proc is not mounted or if proc is simply reconfigured.
* Add few selftests.
* After a discussion with Eric W. Biederman, the numerical values for hidepid
parameter have been removed from uapi.
* Remove proc_self and proc_thread_self from the pid_namespace struct.
* I took into account the comment of Kees Cook.
* Update Reviewed-by tags.
* 'subset=pidfs' renamed to 'subset=pid' as suggested by Alexey Dobriyan.
* Include Reviewed-by tags.
* Rebase on top of Eric W. Biederman's procfs changes.
* Add human readable values of 'hidepid' as suggested by Andy Lutomirski.
* Started using RCU lock to clean dcache entries as suggested by Linus Torvalds.
* 'pidonly=1' renamed to 'subset=pidfs' as suggested by Alexey Dobriyan.
* HIDEPID_* moved to uapi/ as they are user interface to mount().
Suggested-by Alexey Dobriyan <adobriyan@gmail.com>
* 'hidepid=' and 'gid=' mount options are moved from pid namespace to superblock.
* 'newinstance' mount option removed as suggested by Eric W. Biederman.
Mount of procfs always creates a new instance.
* 'limit_pids' renamed to 'hidepid=3'.
* I took into account the comment of Linus Torvalds [7].
* Documentation added.
* Fixed a bug that caused a problem with the Fedora boot.
* The 'pidonly' option is visible among the mount options.
* Renamed mount options to 'newinstance' and 'pids='
Suggested-by: Andy Lutomirski <luto@kernel.org>
* Fixed order of commit, Suggested-by: Andy Lutomirski <luto@kernel.org>
* Many bug fixes.
* Removed 'unshared' mount option and replaced it with 'limit_pids'
which is attached to the current procfs mount.
Suggested-by Andy Lutomirski <luto@kernel.org>
* Do not fill dcache with pid entries that we can not ptrace.
* Many bug fixes.
References:
-----------
[1] https://lists.linuxfoundation.org/pipermail/ksummit-discuss/2017-January/004215.html
[2] http://www.openwall.com/lists/kernel-hardening/2017/10/05/5
[3] https://lwn.net/Articles/689539/
[4] http://lxr.free-electrons.com/source/Documentation/filesystems/devpts.txt?v=3.14
[5] https://lkml.org/lkml/2017/5/2/407
[6] https://lkml.org/lkml/2017/5/3/357
[7] https://lkml.org/lkml/2018/5/11/505
Alexey Gladkov (7):
proc: rename struct proc_fs_info to proc_fs_opts
proc: allow to mount many instances of proc in one pid namespace
proc: instantiate only pids that we can ptrace on 'hidepid=4' mount
option
proc: add option to mount only a pids subset
docs: proc: add documentation for "hidepid=4" and "subset=pid" options
and new mount behavior
proc: use human-readable values for hidepid
proc: use named enums for better readability
Documentation/filesystems/proc.rst | 92 +++++++++---
fs/proc/base.c | 48 +++++--
fs/proc/generic.c | 9 ++
fs/proc/inode.c | 30 +++-
fs/proc/root.c | 131 +++++++++++++-----
fs/proc/self.c | 6 +-
fs/proc/thread_self.c | 6 +-
fs/proc_namespace.c | 14 +-
include/linux/pid_namespace.h | 12 --
include/linux/proc_fs.h | 30 +++-
tools/testing/selftests/proc/.gitignore | 2 +
tools/testing/selftests/proc/Makefile | 2 +
.../selftests/proc/proc-fsconfig-hidepid.c | 50 +++++++
.../selftests/proc/proc-multiple-procfs.c | 48 +++++++
14 files changed, 384 insertions(+), 96 deletions(-)
create mode 100644 tools/testing/selftests/proc/proc-fsconfig-hidepid.c
create mode 100644 tools/testing/selftests/proc/proc-multiple-procfs.c
Link: https://lore.kernel.org/lkml/20200419141057.621356-1-gladkov.alexey@gmail.com/
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
There's several cases of json-schema 'additionalProperties' at the wrong
indentation level which has the effect of making them DT properties. This
is harmless, but let's fix them so a meta-schema check for this can be
added.
In all the cases, either the 'additionalProperties' was extra or doesn't
work because there's a $ref to more properties. In the latter case, we
can use 'unevaluatedProperties' instead.
Reported-by: Iskren Chernev <iskren.chernev@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Saravanan Sekar <sravanhome@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
We only hold the active spinlock while dumping the error state, and this
does not prevent another thread from retiring the request -- as it is
quite possible that despite us capturing the current state, the GPU has
completed the request. As such, it is dangerous to dereference state
below the request as it may already be freed, and the simplest way to
avoid the danger is not include it in the error state.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1788
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424191410.27570-1-chris@chris-wilson.co.uk
Oleg pointed out that in the unlikely event the kernel is compiled
with CONFIG_PROC_FS unset that release_task will now leak the pid.
Move the put_pid out of proc_flush_pid into release_task to fix this
and to guarantee I don't make that mistake again.
When possible it makes sense to keep get and put in the same function
so it can easily been seen how they pair up.
Fixes: 7bc3e6e55a ("proc: Use a list of inodes to flush from proc")
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Restore an optimization related to asynchronous suspend and resume of
devices during system-wide power transitions that was disabled by
mistake (Kai-Heng Feng) and update the pm-graph suite of power
management utilities (Todd Brandt).
-----BEGIN PGP SIGNATURE-----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=pHmC
-----END PGP SIGNATURE-----
Merge tag 'pm-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Restore an optimization related to asynchronous suspend and resume of
devices during system-wide power transitions that was disabled by
mistake (Kai-Heng Feng) and update the pm-graph suite of power
management utilities (Todd Brandt)"
* tag 'pm-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Switch back to async_schedule_dev()
pm-graph v5.6
Make the PNP code use list_for_each_entry() in a few places
instead of open-coding it (Jason Gunthorpe).
-----BEGIN PGP SIGNATURE-----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=drtq
-----END PGP SIGNATURE-----
Merge tag 'pnp-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull PNP cleanup from Rafael Wysocki:
"Make the PNP code use list_for_each_entry() in a few places instead of
open-coding it (Jason Gunthorpe)"
* tag 'pnp-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
pnp: Use list_for_each_entry() instead of open coding
Drop a lid status quirk for Asus T200TA that is not necessary
any more and clean up a resource management inconsistency in the
PCI IRQ link configuration code.
Both changes from Hans de Goede.
-----BEGIN PGP SIGNATURE-----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=glUd
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Drop a lid status quirk for Asus T200TA that is not necessary any more
and clean up a resource management inconsistency in the PCI IRQ link
configuration code.
Both changes from Hans de Goede"
* tag 'acpi-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: button: Drop no longer necessary Asus T200TA lid_init_state quirk
ACPI/PCI: pci_link: use extended_irq union member when setting ext-irq shareable
IORING_OP_MADVISE can end up basically doing mprotect() on the VM of
another process, which means that it can race with our crazy core dump
handling which accesses the VM state without holding the mmap_sem
(because it incorrectly thinks that it is the final user).
This is clearly a core dumping problem, but we've never fixed it the
right way, and instead have the notion of "check that the mm is still
ok" using mmget_still_valid() after getting the mmap_sem for writing in
any situation where we're not the original VM thread.
See commit 04f5866e41 ("coredump: fix race condition between
mmget_not_zero()/get_task_mm() and core dumping") for more background on
this whole mmget_still_valid() thing. You might want to have a barf bag
handy when you do.
We're discussing just fixing this properly in the only remaining core
dumping routines. But even if we do that, let's make do_madvise() do
the right thing, and then when we fix core dumping, we can remove all
these mmget_still_valid() checks.
Reported-and-tested-by: Jann Horn <jannh@google.com>
Fixes: c1ca757bd6 ("io_uring: add IORING_OP_MADVISE")
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fix a wrong GFP_KERNEL in hwsim
* fix the debugfs mess after the mac80211 registration race fix
* suppress false-positive RCU list lockdep warnings
-----BEGIN PGP SIGNATURE-----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=SKNj
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2020-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just three changes:
* fix a wrong GFP_KERNEL in hwsim
* fix the debugfs mess after the mac80211 registration race fix
* suppress false-positive RCU list lockdep warnings
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Second set of fixes for v5.7. Quite a few iwlwifi fixes and some
maintainers file updates.
iwlwifi
* fix a bug with kmemdup() error handling
* fix a DMA pool warning about unfreed memory
* fix beacon statistics
* fix a theoritical bug in device initialisation
* fix queue limit handling and inactive TID removal
* disable ACK Enabled Aggregation which was enabled by accident
* fix transmit power setting reading from BIOS with certain versions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJeon8dAAoJEG4XJFUm622b3I4H/2qSe/+choibIJj1QLsPuFzD
M4vYMulQO1GjKzn+t9cVp3D30oKPUKdE2hQyXQ/10YLoovfe1OfAsKxL/IDVlb4d
h4e3qf+lWslaz8X9gMfN0fU6M+fNsmcrbvce5K9V2cun2WReuTprgkdQv9ErQQkF
JB58pbLV1x3VZFaBttVFMtJ6fA9FEFlX/cw197tPtB7t20cI3i+km92bIcwYf6XS
ifSIRUWgH8KpPE2nhQUpR7CxaoCsqvuM+HMn2nMwJX8j80Ot6x+S8m+2pTEObonA
XDXwOp7htfAx+xA+Z6nY8UIbMOFpFoQAwFpzd5P54L3uw5PX/0b0vkpfOu2k9l0=
=bqg+
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-2020-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.7
Second set of fixes for v5.7. Quite a few iwlwifi fixes and some
maintainers file updates.
iwlwifi
* fix a bug with kmemdup() error handling
* fix a DMA pool warning about unfreed memory
* fix beacon statistics
* fix a theoritical bug in device initialisation
* fix queue limit handling and inactive TID removal
* disable ACK Enabled Aggregation which was enabled by accident
* fix transmit power setting reading from BIOS with certain versions
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=L+dP
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.7-2020-04-24' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Single fixup for a change that went into -rc2"
* tag 'io_uring-5.7-2020-04-24' of git://git.kernel.dk/linux-block:
io_uring: only restore req->work for req that needs do completion
- Two fixes that fix memory leaks detected by kmemleak
- Removal of some dead code
- A few local functions turned to static
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXqIivBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qswYAQDEH+T80JHD1XBPpqWw6JBKvPph7moz
AsjasFiX3d5T2AD+JvNMpZntTtZPWz8+V+RqbU7EcBFD9qCNIxaZXaECOAw=
=Cm2g
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few tracing fixes:
- Two fixes for memory leaks detected by kmemleak
- Removal of some dead code
- A few local functions turned static"
* tag 'trace-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Convert local functions in tracing_map.c to static
tracing: Remove DECLARE_TRACE_NOARGS
ftrace: Fix memory leak caused by not freeing entry in unregister_ftrace_direct()
tracing: Fix memory leaks in trace_events_hist.c
[ This is again a forward-port of the fix applied for 5.6-base code
(commit 4285de0725) to 5.7-base, hence neither Fixes nor
Cc-to-stable tags are included here -- tiwai ]
The checks of the plugin buffer overflow in the previous fix by commit
f2ecf903ef ("ALSA: pcm: oss: Avoid plugin buffer overflow")
are put in the wrong places mistakenly, which leads to the expected
(repeated) sound when the rate plugin is involved. Fix in the right
places.
Also, at those right places, the zero check is needed for the
termination node, so added there as well, and let's get it done,
finally.
Link: https://lore.kernel.org/r/20200424193843.20397-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PCIe Advanced Error Reporting (AER) is optional and there's no need for it
to be selected by default.
Remove the "default y" for CONFIG_PCIEAER.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Russell Currey <ruscur@russell.cc>
Cc: Sam Bobroff <sbobroff@linux.ibm.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Update the documentation of the driver flags for system-wide power
management to reflect the current code flows and be more consistent.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Drivers should not be selected by default because that bloats the kernel
for people who don't need them.
Remove the "default y" for CONFIG_PCI_KEYSTONE_HOST.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
The checks of the plugin buffer overflow in the previous fix by commit
f2ecf903ef ("ALSA: pcm: oss: Avoid plugin buffer overflow")
are put in the wrong places mistakenly, which leads to the expected
(repeated) sound when the rate plugin is involved. Fix in the right
places.
Also, at those right places, the zero check is needed for the
termination node, so added there as well, and let's get it done,
finally.
Fixes: f2ecf903ef ("ALSA: pcm: oss: Avoid plugin buffer overflow")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200424193350.19678-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Drivers should not be selected by default because that bloats the kernel
for people who don't need them.
Enable CONFIG_PCI_DRA7XX_HOST by default only if SOC_DRA7XX.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: linux-omap@vger.kernel.org
Rename DPM_FLAG_LEAVE_SUSPENDED to DPM_FLAG_MAY_SKIP_RESUME which
matches its purpose more closely.
No functional impact.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
26ad34d510 ("PCI / ACPI: Whitelist D3 for more PCIe hotplug ports") added
the struct pci_platform_pm_ops.bridge_d3() function pointer and
platform_pci_bridge_d3() to use it.
The .bridge_d3() op is implemented by acpi_pci_platform_pm, but not by
mid_pci_platform_pm. We don't expect platform_pci_bridge_d3() to be called
on Intel MID platforms, but nothing in the code itself would prevent that.
Check the .bridge_d3() pointer for NULL before calling it.
Fixes: 26ad34d510 ("PCI / ACPI: Whitelist D3 for more PCIe hotplug ports")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Rename DPM_FLAG_NEVER_SKIP to DPM_FLAG_NO_DIRECT_COMPLETE which
matches its purpose more closely.
No functional impact.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # for PCI parts
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Because all callers of dev_pm_smart_suspend_and_suspended use it only
for checking whether or not to skip driver suspend callbacks for a
device, rename it to dev_pm_skip_suspend() in analogy with
dev_pm_skip_resume().
No functional impact.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
The name of dev_pm_may_skip_resume() may be easily confused with the
power.may_skip_resume flag which is not checked by that function, so
rename the former as dev_pm_skip_resume().
No functional impact.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Because the power.may_skip_resume device status bit is taken
into account in combination with the DPM_FLAG_LEAVE_SUSPENDED
driver flag, it can be set to 'true' for all devices in the
"suspend" phase of a suspend-resume cycle, so do that.
Then, neither the PM core nor the middle-layer (sybsystem) code
handling it needs to set it to 'true' any more and it just has
to be cleared if there is a reason to avoid skipping the "noirq"
and "early" resume callbacks provided by the driver, so update
the code in question accordingly.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
The current code in device_resume_noirq() causes the entire early
resume and resume phases of device suspend to be skipped for
devices for which the noirq resume phase have been skipped (due
to the LEAVE_SUSPENDED flag being set) on the premise that those
devices should stay in runtime-suspend after system-wide resume.
However, that may not be correct in two situations. First, the
middle layer (subsystem) noirq resume callback may be missing for
a given device, but its early resume callback may be present and it
may need to do something even if it decides to skip the driver
callback. Second, if the device's wakeup settings were adjusted
in the suspend phase without resuming the device (that was in
runtime suspend at that time), they most likely need to be
adjusted again in the resume phase and so the driver callback
in that phase needs to be run.
For the above reason, modify the core to allow the middle layer
->resume_late callback to run even if its ->resume_noirq callback
is missing (and the core has skipped the driver-level callback
in that phase) and to allow all device callbacks to run in the
resume phase. Also make the core set the PM-runtime status of
devices with SMART_SUSPEND set whose resume callbacks are not
skipped to "active" in the "noirq" resume phase and update the
affected subsystems (PCI and ACPI) accordingly.
After this change, middle-layer (subsystem) callbacks will always
be invoked in all phases of system suspend and resume and driver
callbacks will always run in the prepare, suspend, resume, and
complete phases for all devices.
For devices with SMART_SUSPEND set, driver callbacks will be
skipped in the late and noirq phases of system suspend if those
devices remain in runtime suspend in __device_suspend_late().
Driver callbacks will also be skipped for them during the
noirq and early phases of the "thaw" transition related to
hibernation in that case.
Setting LEAVE_SUSPENDED means that the driver allows its callbacks
to be skipped in the noirq and early phases of system resume, but
some additional conditions need to be met for that to happen (among
other things, the power.may_skip_resume flag needs to be set for the
device during system suspend for the driver callbacks to be skipped
during the subsequent resume transition).
For all devices with SMART_SUSPEND set whose driver callbacks are
invoked during system resume, the PM-runtime status will be set to
"active" (by the core).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
