With amdgpu and CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y, there are
errors like:
BUG: non-zero pgtables_bytes on freeing mm
and:
BUG: Bad rss-counter state
with TTM transparent huge-pages.
Until we've figured out what other TTM drivers do differently compared to
vmwgfx, disable the huge_fault() callback, eliminating transhuge
page-table entries.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409164925.11912-1-thomas_os@shipmail.org
analogix_dp
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXo7nVgAKCRDj7w1vZxhR
xZT+AP9i6qVtOQo9uB0DVZbpB2tc8G0h1afHnnsp1cIksXr6JwEAy9UjIHH0anh5
WZwptuq2aiMmGcQgHgvZPp2xSt4Esg4=
=J8n9
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2020-04-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
A few DMA-related fixes, an OOB fix for virtio and a probe-related fix for
analogix_dp
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409091424.cfpqqbqjxtkgnfme@gilmour.lan
When "ubifs: introduce UBIFS_ATIME_SUPPORT to ubifs" introduced atime
support to ubifs, it also added lazytime support. As far as I can tell
the lazytime support is terminally broken, as it causes
mark_inode_dirty_sync to be called from __writeback_single_inode, which
will then trigger the locking assert in ubifs_dirty_inode. Just remove
the broken lazytime support for now, it can be added back later,
especially as some infrastructure changes should make that easier soon.
Fixes: 8c1c5f2638 ("ubifs: introduce UBIFS_ATIME_SUPPORT to ubifs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Commit a0900d0195 ("mtd: spi-nor: Prepare core / manufacturer code
split") moved various files into a new directory, but did not add the new
directory to its parent directory Makefile. The moved files no longer
build, and affected flash chips no longer instantiate.
Adding the new directory to the parent directory Makefile fixes the
problem.
Fixes: a0900d0195 ("mtd: spi-nor: Prepare core / manufacturer code split")
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Summary of modules changes for the 5.7 merge window:
- Trivial zero-length array to flexible-array cleanup
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=HWeX
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Only a small cleanup this time around: a trivial conversion of
zero-length arrays to flexible arrays"
* tag 'modules-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
kernel: module: Replace zero-length array with flexible-array member
`removed_sized` isn't correctly initialized (as the doc comment
suggests) on memory allocation failures. Fix by moving initialization up
a bit.
Fixes: 0c47383ba3 ("kernfs: Add option to enable user xattrs")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Tejun Heo <tj@kernel.org>
The variable err is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409133107.415812-1-colin.king@canonical.com
This reverts commit 9a9e97b2f1 ("cgroup: Add memory barriers to plug
cgroup_rstat_updated() race window").
The commit was added in anticipation of memcg rstat conversion which needed
synchronous accounting for the event counters (e.g. oom kill count). However,
the conversion didn't get merged due to percpu memory overhead concern which
couldn't be addressed at the time.
Unfortunately, the patch's addition of smp_mb() to cgroup_rstat_updated()
meant that every scheduling event now had to go through an additional full
barrier and Mel Gorman noticed it as 1% regression in netperf UDP_STREAM test.
There's no need to have this barrier in tree now and even if we need
synchronous accounting in the future, the right thing to do is separating that
out to a separate function so that hot paths which don't care about
synchronous behavior don't have to pay the overhead of the full barrier. Let's
revert.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Link: http://lkml.kernel.org/r/20200409154413.GK3818@techsingularity.net
Cc: v4.18+
Whenever we walk along the dma-fence-chain, we prune signaled links to
keep the chain nice and tidy. This leads to situations where we can
prune a link and report the earlier fence as the target seqno --
violating our own consistency checks that the seqno is not more advanced
than the last element in a dma-fence-chain.
Report a NULL fence and success if the seqno has already been signaled.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409110101.18400-2-chris@chris-wilson.co.uk
Inside dma-fence-chain, we use a cmpxchg on an RCU-protected pointer. To
avoid the sparse warning for using the RCU pointer directly, we have to
cast away the __rcu annotation. However, we don't need to use void*
everywhere and can stick to the dma_fence*.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409110101.18400-1-chris@chris-wilson.co.uk
The noisy posix error message in readdir was supposed
to be an FYI (not enabled by default)
CIFS VFS: XXX dev 66306, reparse 0, mode 755
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
- Ensure that the compiler and linker versions are aligned so that ld
doesn't complain about not understanding a .note.gnu.property section
(emitted when pointer authentication is enabled).
- Force -mbranch-protection=none when the feature is not enabled, in
case a compiler may choose a different default value.
- Remove CONFIG_DEBUG_ALIGN_RODATA. It was never in defconfig and rarely
enabled.
- Fix checking 16-bit Thumb-2 instructions checking mask in the
emulation of the SETEND instruction (it could match the bottom half of
a 32-bit Thumb-2 instruction).
-----BEGIN PGP SIGNATURE-----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=pHRG
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Ensure that the compiler and linker versions are aligned so that ld
doesn't complain about not understanding a .note.gnu.property section
(emitted when pointer authentication is enabled).
- Force -mbranch-protection=none when the feature is not enabled, in
case a compiler may choose a different default value.
- Remove CONFIG_DEBUG_ALIGN_RODATA. It was never in defconfig and
rarely enabled.
- Fix checking 16-bit Thumb-2 instructions checking mask in the
emulation of the SETEND instruction (it could match the bottom half
of a 32-bit Thumb-2 instruction).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: armv8_deprecated: Fix undef_hook mask for thumb setend
arm64: remove CONFIG_DEBUG_ALIGN_RODATA feature
arm64: Always force a branch protection mode when the compiler has one
arm64: Kconfig: ptrauth: Add binutils version check to fix mismatch
init/kconfig: Add LD_VERSION Kconfig
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and turn it off
by default for ppc64le where it's not used.
- A few other miscellaneous fixes and small improvements.
Thanks to:
Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann, Christophe Leroy, Dan
Carpenter, Ganesh Goudar, Geert Uytterhoeven, Geoff Levand, Mahesh Salgaonkar,
Markus Elfring, Michal Suchanek, Nicholas Piggin, Stephen Boyd, Wen Xiong.
-----BEGIN PGP SIGNATURE-----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=72sb
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"The bulk of this is the series to make CONFIG_COMPAT user-selectable,
it's been around for a long time but was blocked behind the
syscall-in-C series.
Plus there's also a few fixes and other minor things.
Summary:
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and
turn it off by default for ppc64le where it's not used.
- A few other miscellaneous fixes and small improvements.
Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann,
Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven,
Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek,
Nicholas Piggin, Stephen Boyd, Wen Xiong"
* tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Always build the tm-poison test 64-bit
powerpc: Improve ppc_save_regs()
Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"
powerpc/time: Replace <linux/clk-provider.h> by <linux/of_clk.h>
powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory
powerpc/perf: split callchain.c by bitness
powerpc/64: Make COMPAT user-selectable disabled on littleendian by default.
powerpc/64: make buildable without CONFIG_COMPAT
powerpc/perf: consolidate valid_user_sp -> invalid_user_sp
powerpc/perf: consolidate read_user_stack_32
powerpc: move common register copy functions from signal_32.c to signal.c
powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro
powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig
powerpc/ps3: Remove an unneeded NULL check
powerpc/ps3: Remove duplicate error message
powerpc/powernv: Re-enable imc trace-mode in kernel
powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events.
powerpc/pseries: Fix MCE handling on pseries
selftests/eeh: Skip ahci adapters
powerpc/64s: Fix doorbell wakeup msgclr optimisation
Pull m68knommu update from Greg Ungerer:
"Only a single commit, to remove all use of the obsolete setup_irq()
calls within the m68knommu architecture code"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: Replace setup_irq() by request_irq()
The error could indicate a problem with the Bluetooth device. It
is easier to investigate if the packet's actual length gets logged,
not just the fact that a discrepancy occurred.
Signed-off-by: Daniels Umanovskis <du@axentia.se>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This tag contains the patches I'd like to target for 5.7. It has a handful of
new features:
* Partial support for the Kendryte K210. There are still a few outstanding
issues that I have patches for, but I don't actually have a board to test
them so they're not included yet.
* SBI v0.2 support.
* Fixes to support for building with LLVM-based toolchains. The resulting
images are known not to boot yet.
This builds and boots for me. There is one merge conflict, it's just a Kconfig
merge issue. I can publish a resolved branch if you'd like.
I don't anticipate a part two, but I'll probably have something early in the
RCs to finish up the K210 support.
-----BEGIN PGP SIGNATURE-----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=P1DO
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains a handful of new features:
- Partial support for the Kendryte K210.
There are still a few outstanding issues that I have patches for,
but I don't actually have a board to test them so they're not
included yet.
- SBI v0.2 support.
- Fixes to support for building with LLVM-based toolchains. The
resulting images are known not to boot yet.
I don't anticipate a part two, but I'll probably have something early
in the RCs to finish up the K210 support"
* tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
riscv: create a loader.bin boot image for Kendryte SoC
riscv: Kendryte K210 default config
riscv: Add Kendryte K210 device tree
riscv: Select required drivers for Kendryte SOC
riscv: Add Kendryte K210 SoC support
riscv: Add SOC early init support
riscv: Unaligned load/store handling for M_MODE
RISC-V: Support cpu hotplug
RISC-V: Add supported for ordered booting method using HSM
RISC-V: Add SBI HSM extension definitions
RISC-V: Export SBI error to linux error mapping function
RISC-V: Add cpu_ops and modify default booting method
RISC-V: Move relocate and few other functions out of __init
RISC-V: Implement new SBI v0.2 extensions
RISC-V: Introduce a new config for SBI v0.1
RISC-V: Add SBI v0.2 extension definitions
RISC-V: Add basic support for SBI v0.2
RISC-V: Mark existing SBI as 0.1 SBI.
riscv: Use macro definition instead of magic number
riscv: Add support to dump the kernel page tables
...
Move register access after clock initialization.
Clock "s_axi_aclk" is needed for register access. Without the clock running
AXI bus hangs and causes kernel freeze.
Signed-off-by: Rafał Hibner <rafal.hibner@secom.com.pl>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20200409155621.12174-1-rafal.hibner@secom.com.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
When CONFIG_IP_MULTICAST is not set and multicast ip is added to the device
with autojoin flag or when multicast ip is deleted kernel will crash.
steps to reproduce:
ip addr add 224.0.0.0/32 dev eth0
ip addr del 224.0.0.0/32 dev eth0
or
ip addr add 224.0.0.0/32 dev eth0 autojoin
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088
pc : _raw_write_lock_irqsave+0x1e0/0x2ac
lr : lock_sock_nested+0x1c/0x60
Call trace:
_raw_write_lock_irqsave+0x1e0/0x2ac
lock_sock_nested+0x1c/0x60
ip_mc_config.isra.28+0x50/0xe0
inet_rtm_deladdr+0x1a8/0x1f0
rtnetlink_rcv_msg+0x120/0x350
netlink_rcv_skb+0x58/0x120
rtnetlink_rcv+0x14/0x20
netlink_unicast+0x1b8/0x270
netlink_sendmsg+0x1a0/0x3b0
____sys_sendmsg+0x248/0x290
___sys_sendmsg+0x80/0xc0
__sys_sendmsg+0x68/0xc0
__arm64_sys_sendmsg+0x20/0x30
el0_svc_common.constprop.2+0x88/0x150
do_el0_svc+0x20/0x80
el0_sync_handler+0x118/0x190
el0_sync+0x140/0x180
Fixes: 93a714d6b5 ("multicast: Extend ip address command to enable multicast group join/leave on")
Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rds_free_mr(), it calls rds_destroy_mr(mr) directly. But this
defeats the purpose of reference counting and makes MR free handling
impossible. It means that holding a reference does not guarantee that
it is safe to access some fields. For example, In
rds_cmsg_rdma_dest(), it increases the ref count, unlocks and then
calls mr->r_trans->sync_mr(). But if rds_free_mr() (and
rds_destroy_mr()) is called in between (there is no lock preventing
this to happen), r_trans_private is set to NULL, causing a panic.
Similar issue is in rds_rdma_unuse().
Reported-by: zerons <sironhide0null@gmail.com>
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
And removed rds_mr_put().
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot wrote:
> ========================================================
> WARNING: possible irq lock inversion dependency detected
> 5.6.0-syzkaller #0 Not tainted
> --------------------------------------------------------
> swapper/1/0 just changed the state of lock:
> ffffffff898090d8 (tasklist_lock){.+.?}-{2:2}, at: send_sigurg+0x9f/0x320 fs/fcntl.c:840
> but this lock took another, SOFTIRQ-unsafe lock in the past:
> (&pid->wait_pidfd){+.+.}-{2:2}
>
>
> and interrupts could create inverse lock ordering between them.
>
>
> other info that might help us debug this:
> Possible interrupt unsafe locking scenario:
>
> CPU0 CPU1
> ---- ----
> lock(&pid->wait_pidfd);
> local_irq_disable();
> lock(tasklist_lock);
> lock(&pid->wait_pidfd);
> <Interrupt>
> lock(tasklist_lock);
>
> *** DEADLOCK ***
>
> 4 locks held by swapper/1/0:
The problem is that because wait_pidfd.lock is taken under the tasklist
lock. It must always be taken with irqs disabled as tasklist_lock can be
taken from interrupt context and if wait_pidfd.lock was already taken this
would create a lock order inversion.
Oleg suggested just disabling irqs where I have added extra calls to
wait_pidfd.lock. That should be safe and I think the code will eventually
do that. It was rightly pointed out by Christian that sharing the
wait_pidfd.lock was a premature optimization.
It is also true that my pre-merge window testing was insufficient. So
remove the premature optimization and give struct pid a dedicated lock of
it's own for struct pid things. I have verified that lockdep sees all 3
paths where we take the new pid->lock and lockdep does not complain.
It is my current day dream that one day pid->lock can be used to guard the
task lists as well and then the tasklist_lock won't need to be held to
deliver signals. That will require taking pid->lock with irqs disabled.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/lkml/00000000000011d66805a25cd73f@google.com/
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Reported-by: syzbot+343f75cdeea091340956@syzkaller.appspotmail.com
Reported-by: syzbot+832aabf700bc3ec920b9@syzkaller.appspotmail.com
Reported-by: syzbot+f675f964019f884dbd0f@syzkaller.appspotmail.com
Reported-by: syzbot+a9fb1457d720a55d6dc5@syzkaller.appspotmail.com
Fixes: 7bc3e6e55a ("proc: Use a list of inodes to flush from proc")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The variable ret is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the local node id(qrtr_local_nid) is not modified after its
initialization, it equals to the broadcast node id(QRTR_NODE_BCAST).
So the messages from local node should not be taken as broadcast
and keep the process going to send them out anyway.
The definitions are as follow:
static unsigned int qrtr_local_nid = NUMA_NO_NODE;
Fixes: fdf5fd3975 ("net: qrtr: Broadcast messages only from control port")
Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl6OVGEACgkQSD+KveBX
+j7E8gf+K3xqUtcXUL3sCx1M2kY2Kj4ZjvL9H3m286mTmTAbSwMdEOJWaHfWVqZJ
8cf3Df/keK723YH+xPYbSQPloUgSIpazIFzjP6fvAkLKAu/AhLoVhBj3TF5hFaib
BrK8L/QKoY6GGSuZb4+VJTenPYUPGFjNTlAHbchRO9V7SA9ngKZIz34ipVI8U+lT
kRE8+YVsNM4c4ia3A4VcgAN/MCAbn+bTojS8/O5+ZyFYr3ErdgwFRHMzRiVnYeHE
9WFO4or2AVk4yiI5hqzH1/nJdhjOUK930Al68dfNdrHmmZXnD4lX9M4I+AoNB3qh
zzykSerxjUC4yx4t8Nrq3na0U6RiSA==
=KWRI
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2020-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2020-04-08
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v5.3
('net/mlx5: Fix frequent ioread PCI access during recovery')
('net/mlx5e: Add missing release firmware call')
For -stable v5.4
('net/mlx5e: Fix nest_level for vlan pop action')
('net/mlx5e: Fix pfnum in devlink port attribute')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
At 'make htmldocs' the following warning is thrown:
Documentation/networking/devlink/devlink-trap.rst:302:
WARNING: undefined label: generic-packet-trap-groups
Fixes the warning by setting the label to the specified header,
within the same document.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A few kernel features depend on ms_hyperv.misc_features, but unlike its
siblings ->features and ->hints, the value was never reported during boot.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: https://lore.kernel.org/r/20200407172739.31371-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Although it's not unexpected for drm_dp_check_act_status() to fail due
to DPCD read failures (as the hub may have just been unplugged
suddenly), timeouts are a bit more worrying as they either mean we need
a longer timeout value, or we aren't setting up payload allocations
properly. So, let's start printing errors on timeouts.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-5-lyude@redhat.com
Currently we only poll for an ACT up to 30 times, with a busy-wait delay
of 100µs between each attempt - giving us a timeout of 2900µs. While
this might seem sensible, it would appear that in certain scenarios it
can take dramatically longer then that for us to receive an ACT. On one
of the EVGA MST hubs that I have available, I observed said hub
sometimes taking longer then a second before signalling the ACT. These
delays mostly seem to occur when previous sideband messages we've sent
are NAKd by the hub, however it wouldn't be particularly surprising if
it's possible to reproduce times like this simply by introducing branch
devices with large LCTs since payload allocations have to take effect on
every downstream device up to the payload's target.
So, instead of just retrying 30 times we poll for the ACT for up to 3ms,
and additionally use usleep_range() to avoid a very long and rude
busy-wait. Note that the previous retry count of 30 appears to have been
arbitrarily chosen, as I can't find any mention of a recommended timeout
or retry count for ACTs in the DisplayPort 2.0 specification. This also
goes for the range we were previously using for udelay(), although I
suspect that was just copied from the recommended delay for link
training on SST devices.
Changes since v1:
* Use readx_poll_timeout() instead of open-coding timeout loop - Sean
Paul
Changes since v2:
* Increase poll interval to 200us - Sean Paul
* Print status in hex when we timeout waiting for ACT - Sean Paul
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Sean Paul <sean@poorly.run>
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-4-lyude@redhat.com
Just add a bit more line wrapping, get rid of some extraneous
whitespace, remove an unneeded goto label, and move around some variable
declarations. No functional changes here.
Signed-off-by: Lyude Paul <lyude@redhat.com>
[this isn't a fix, but it's needed for the fix that comes after this]
Fixes: ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Sean Paul <sean@poorly.run>
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-3-lyude@redhat.com
If completion queue overflow occurs, __io_cqring_fill_event() will
update req->cflags, which is in a union with req->work and happens to
be aliased to req->work.fs. Following io_free_req() ->
io_req_work_drop_env() may get a bunch of different problems (miscount
fs->users, segfault, etc) on cleaning @fs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Intel Comet Lake should use the default LPM policy for mobile chipsets.
So, add the PCI ID to the driver list of supported devices.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 2f62f36e62 ("x86/xen: Make the boot CPU idle task reliable")
introduced a regression for booting 32 bit Xen PV guests: the address
of the initial stack needs to be a virtual one.
Fixes: 2f62f36e62 ("x86/xen: Make the boot CPU idle task reliable")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200409070001.16675-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
sdio bus bandwidth is low, sometimes for high performance TX test,
it will lack of ath10k_sdio_bus_request, it will print message:
ath10k_sdio mmc1:0001:1: unable to allocate bus request for async request
change the num from 64 to 1024 will not happen it.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWP-1.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200212080415.31265-3-wgong@codeaurora.org
For sdio chip, it is high latency bus, all the TX packet's content will
be tranferred from HOST memory to firmware memory via sdio bus, then it
need much more memory in firmware than low latency bus chip, for low
latency chip, such as PCI-E, it only need to transfer the TX descriptor
via PCI-E bus to firmware memory. For sdio chip, reduce the complexity of
TX logic will help TX efficiency since its memory is limited, and it will
reduce the TX circle's time of each packet and then firmware will have more
memory for TX since TX complete also need memeory.
This patch disable TX complete indication from firmware for htt data
packet, it will not have TX complete indication from firmware to ath10k.
It will cut the cost of bus bandwidth of TX complete and make the TX
logic of firmware simpler, it results in significant performance
improvement on TX path.
Udp TX throughout is 130Mbps without this patch, and it arrives
400Mbps with this patch.
The downside of this patch is the command "iw wlan0 station dump" will
show 0 for "tx retries" and "tx failed" since all tx packet's status
is success.
This patch only effect sdio chip, it will not effect PCI, SNOC etc.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWPZ-1
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200212080415.31265-2-wgong@codeaurora.org
This reverts commit b74fb888f4.
Revert the auto alignment mode set of SH MEM config, as it will result
to OCL Conformance Test fail.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This sequence is recommended by PMFW team for the baco reset
with PMFW reloaded. And it seems able to address the random
failure seen on Arcturus.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Execution will only reach here if the asserted condition is true.
Hence there is no need for the additional check.
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fixes unused variable warning.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the fw_write_wait default case true since presumably all new
gfx9 asics will have updated firmware. That is using unique WAIT_REG_MEM
packet with opration=1.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Yuxian Dai <Yuxian.Dai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add indirect access support to registers outside of
mmio bar.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
all the register access through kiq is redirected
to amdgpu_kiq_rreg/amdgpu_kiq_wreg
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
those are not needed anymore
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
not needed anymore
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
all the mmCUR_CONTROL instances are in mmr range and
can be accessd directly by using RREG32/WREG32
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the workaround is not needed for soc15 ASICs except
for vega10. it is even not needed with latest vega10
vbios.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Arcturus, forcing clock to some specific level is not supported
with 54.18 and onwards SMU firmware. As according to firmware team,
they adopt new gfx dpm tuned parameters which can cover all the use
case in a much smooth way. Thus setting through driver interface
is not needed and maybe do a disservice.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
