A new file was added to the tracing directory that will allow a user to
place a PID into it and the task associated to that PID will not be traced
by the function tracer. If the function-fork option is enabled, then neither
will the children of that task be traced by the function tracer.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's currently a way to select a task that should only have its events
traced, but there's no way to select a task not to have itsevents traced.
Add a set_event_notrace_pid file that acts the same as set_event_pid (and is
also affected by event-fork), but the task pids in this file will not be
traced even if they are listed in the set_event_pid file. This makes it easy
for tools like trace-cmd to "hide" itself from beint traced by events when
it is recording other tasks.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's currently a way to select a task that should only be traced by
functions, but there's no way to select a task not to be traced by the
function tracer. Add a set_ftrace_notrace_pid file that acts the same as
set_ftrace_pid (and is also affected by function-fork), but the task pids in
this file will not be traced even if they are listed in the set_ftrace_pid
file. This makes it easy for tools like trace-cmd to "hide" itself from the
function tracer when it is recording other tasks.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The set_ftrace_pid file is used to filter function tracing to only trace
tasks that are listed in that file. Instead of testing the pids listed in
that file (it's a bitmask) at each function trace event, the logic is done
via a sched_switch hook. A flag is set when the next task to run is in the
list of pids in the set_ftrace_pid file. But the sched_switch hook is not at
the exact location of when the task switches, and the flag gets set before
the task to be traced actually runs. This leaves a residue of traced
functions that do not belong to the pid that should be filtered on.
By changing the logic slightly, where instead of having a boolean flag to
test, record the pid that should be traced, with special values for not to
trace and always trace. Then at each function call, a check will be made to
see if the function should be ignored, or if the current pid matches the
function that should be traced, and only trace if it matches (or if it has
the special value to always trace).
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Now that reading the trace file does not temporarly stop tracing while it is
open, update the document to reflect this fact.
Link: http://lkml.kernel.org/r/20200317213417.209675068@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Have the ring_buffer_iterator set a flag if events were dropped as it were
to go and peek at the next event. Have the trace file display this fact if
it happened with a "LOST EVENTS" message.
Link: http://lkml.kernel.org/r/20200317213417.045858900@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When opening the "trace" file, it is no longer necessary to disable tracing.
Note, a new option is created called "pause-on-trace", when set, will cause
the trace file to emulate its original behavior.
Link: http://lkml.kernel.org/r/20200317213416.903351225@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Now that the iterator can handle a concurrent writer, do not disable writing
to the ring buffer when there is an iterator present.
Link: http://lkml.kernel.org/r/20200317213416.759770696@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
With the introduction of 55c7c06210 ("ARM: dts: bcm283x: Fix vc4's
firmware bus DMA limitations") the firmware bus has to comply with
/soc's DMA limitations. Ultimately linking both buses to a same
dma-ranges property. The patch (and author) missed the fact that a bus'
#address-cells and #size-cells properties are not inherited, but set to
a fixed value which, in this case, doesn't match /soc's. This, although
not breaking Linux's DMA mapping functionality, generates ugly dtc
warnings.
Fix the issue by adding the correct address and size cells properties
under the firmware bus.
Fixes: 55c7c06210 ("ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200326134413.12298-1-nsaenzjulienne@suse.de
Move from requesting only full file layout segments, to requesting
layout segments that match our I/O size. This means the server is
still free to return a full file layout, but we will no longer
error out if it does not.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When starting to read or write with a layout segment, check that the
range matches our request.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Check that the number of mirrors, and the mirror information matches
before deciding to merge layout segments in pNFS/flexfiles.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fix up pnfs_layout_mark_request_commit() to alway reschedule the write
if the layout segment is invalid. Also minor cleanup.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Move the pNFS commit related operations into a separate structure
that can be carried by the pnfs_ds_commit_info.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Lift filelayout_search_commit_reqs() into the generic pnfs/nfs code,
and add support for commit arrays.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Enable adding and lookup of per-layout segment commits in filelayout
and flexfilelayout.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that both the file and flexfiles layout types clean up when
freeing the layout segments.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add support for scanning the full list of per-layout segment commit
arrays to nfs_clear_pnfs_ds_commit_verifiers().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Instead of trying to save the commit verifiers and checking them against
previous writes, adopt the same strategy as for buffered writes, of
just checking the verifiers at commit time.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add a pNFS callback to allow the O_DIRECT code to release the DS
commitinfo when freeing the dreq.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add support for scanning the full list of per-layout segment commit
arrays to pnfs_generic_commit_pagelist().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add support for scanning the full list of per-layout segment commit
arrays to pnfs_generic_recover_commit_reqs().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add support for scanning the full list of per-layout segment commit
arrays to pnfs_generic_scan_commit_lists()
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When we have multiple layout segments with different lists of mirrored
data, we need to track the commits on a per layout segment basis.
This patch adds a list to support this tracking in struct
pnfs_ds_commit_info.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The register based driver turned out to be unstable, specially on RPi3a+
but not limited to it. While a fix is being worked on, we roll back to
using firmware based scheme.
Fixes: e1dc2b2e1b ("ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20200303173217.3987-1-nsaenzjulienne@suse.de
The SD card power can be controlled trough a pin routed into the board's
external GPIO expander. Turn that into a regulator and provide it to
emmc2.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200306174413.20634-12-nsaenzjulienne@suse.de
When the ring buffer becomes writable for even when the trace file is read,
it must still not be resized. But since tracers can be activated while the
trace file is being read, the irqsoff tracer can modify the per CPU buffers,
and this can cause the reader of the trace file to update the wrong buffer's
resize disable bit, as the irqsoff tracer swaps out cpu buffers.
By making the resize disable per cpu_buffer, it makes the update follow the
per cpu_buffer even if it's swapped out with the snapshot buffer and keeps
the release of the trace file modifying the same data as the open did.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
With the help of previously added tracepoints we can now trace
report-zones, zone-write and zone-mgmt ops in null_blk_zoned.c.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds two new tracpoints for null_blk_zoned.c that allows us
to trace report-zones, zone-mgmt-op and zone-write operations which has
direct effect on the zone condition state machine.
Also, we update drivers/block/Makefile so that new null_blk related
tracefiles can be compiled.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to stringify the zone conditions. We use this helper in the
next patch to track zone conditions in tracepoints.
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use a different markup for the ERR_PTR, as %FOO doesn't work
if there are parenthesis. So, use, instead:
``ERR_PTR(-EINVAL)``
This fixes the following warning:
./drivers/gpio/gpiolib.c:139: WARNING: Inline literal start-string without end-string.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/51197e3568f073e22c280f0584bfa20b44436708.1584456635.git.mchehab+huawei@kernel.org
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Function gfs2_recover_func grabs the sd_log_flush_lock rw_semaphore in
write mode. This is unnecessary because we only need to prevent log flush
from using sd_log_bio bio while it does. Therefore, a read lock will be
enough. This is a small step in cleaning up log flush.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, if the ail1 flush got stuck for some reason, there
were no clues as to why. This patch introduces a check for getting
stuck for more than a minute, and if it happens, it dumps the items
still remaining on the ail1 list.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In function try_rgrp_unlink, we added a temporary lock of the
sd_log_flush_lock while searching the bitmaps. This protected us from
problems in which dinodes being freed were still in a state of flux
because the rgrp was in an active transaction. It was a kludge.
Now that we've straightened out the code for inode eviction, deletes,
and all the recovery mess, we no longer need this kludge.
This patch removes it, and should improve performance.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
We now get the quota data structure when opening a file writable and put it
when closing that writable file descriptor, so there no longer is a need for
gfs2_qa_{get,put} while we're holding a writable file descriptor.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Keeping reservations and quotas separate helps reviewing the code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, multiple users called gfs2_qa_alloc which allocated
a qadata structure to the inode, if quotas are turned on. Later, in
file close or evict, the structure was deleted with gfs2_qa_delete.
But there can be several competing processes who need access to the
structure. There were races between file close (release) and the others.
Thus, a release could delete the structure out from under a process
that relied upon its existence. For example, chown.
This patch changes the management of the qadata structures to be
a get/put scheme. Function gfs2_qa_alloc has been changed to gfs2_qa_get
and if the structure is allocated, the count essentially starts out at
1. Function gfs2_qa_delete has been renamed to gfs2_qa_put, and the
last guy to decrement the count to 0 frees the memory.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, multiple callers called gfs2_rsqa_alloc to force
the existence of a reservations structure and a quota data structure
if needed. However, now the reservations are handled separately, so
the quota data is only the quota data. So we eliminate the one in
favor of just calling gfs2_qa_alloc directly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Replace open-coded versions of list_first_entry and list_last_entry with those
functions.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When allocating a new inode, mark the iopen glock holder as uninitialized to
make sure gfs2_evict_inode won't fail after an incomplete create or lookup. In
gfs2_evict_inode, allow the inode glock to be NULL and remove the duplicate
iopen glock teardown code. In gfs2_inode_lookup, don't tear down things that
gfs2_evict_inode will already tear down.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
dm_clone_nr_of_hydrated_regions() returns the number of regions that
have been hydrated so far. In order to do so it employs bitmap_weight().
Until now, the return type of dm_clone_nr_of_hydrated_regions() was
unsigned long.
Because bitmap_weight() returns an int, in case BITS_PER_LONG == 64 and
the return value of bitmap_weight() is 2^31 (the maximum allowed number
of regions for a device), the result is sign extended from 32 bits to 64
bits and an incorrect value is displayed, in the status output of
dm-clone, as the number of hydrated regions.
Fix this by having dm_clone_nr_of_hydrated_regions() return an unsigned
int.
Fixes: 7431b7835f ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add missing casts when converting from regions to sectors.
In case BITS_PER_LONG == 32, the lack of the appropriate casts can lead
to overflows and miscalculation of the device sector.
As a result, we could end up discarding and/or copying the wrong parts
of the device, thus corrupting the device's data.
Fixes: 7431b7835f ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add overflow check for clone->nr_regions variable, which holds the
number of regions of the target.
The overflow can occur with sufficiently large devices, if BITS_PER_LONG
== 32. E.g., if the region size is 8 sectors (4K), the overflow would
occur for device sizes > 34359738360 sectors (~16TB).
This could result in multiple device sectors wrongly mapping to the same
region number, due to the truncation from 64 bits to 32 bits, which
would lead to data corruption.
Fixes: 7431b7835f ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
