The comment above tun_flow_save_rps_rxhash() starts with "/**" which
makes it look like kerneldoc comment and results in warnings when
building with W=1. Fix the format to make it look like a normal comment.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CLKREF clocks in GCC are parented by RPM_SMD_LN_BB_CLK, through the
CXO2 pad. Wire this up so that this is properly enabled when need by the
various PHYs.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200106080546.3192125-3-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Currently passive MPTCP socket can skip including the DACK
option - if the peer sends data before accept() completes.
The above happens because the msk 'can_ack' flag is set
only after the accept() call.
Such missing DACK option may cause - as per RFC spec -
unwanted fallback to TCP.
This change addresses the issue using the key material
available in the current subflow, if any, to create a suitable
dack option when msk ack seq is not yet available.
v1 -> v2:
- adavance the generated ack after the initial MPC packet
Fixes: d22f4988ff ("mptcp: process MP_CAPABLE data option")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is similar to commit 674d9de02a ("NFC: Fix possible memory
corruption when handling SHDLC I-Frame commands") and commit d7ee81ad09
("NFC: nci: Add some bounds checking in nci_hci_cmd_received()") which
added range checks on "pipe".
The "pipe" variable comes skb->data[0] in nfc_hci_msg_rx_work().
It's in the 0-255 range. We're using it as the array index into the
hdev->pipes[] array which has NFC_HCI_MAX_PIPES (128) members.
Fixes: 118278f20a ("NFC: hci: Add pipes table to reference them with a tuple {gate, host}")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KCSAN find inode->i_disksize could be accessed concurrently.
BUG: KCSAN: data-race in ext4_mark_iloc_dirty / ext4_write_end
write (marked) to 0xffff8b8932f40090 of 8 bytes by task 66792 on cpu 0:
ext4_write_end+0x53f/0x5b0
ext4_da_write_end+0x237/0x510
generic_perform_write+0x1c4/0x2a0
ext4_buffered_write_iter+0x13a/0x210
ext4_file_write_iter+0xe2/0x9b0
new_sync_write+0x29c/0x3a0
__vfs_write+0x92/0xa0
vfs_write+0xfc/0x2a0
ksys_write+0xe8/0x140
__x64_sys_write+0x4c/0x60
do_syscall_64+0x8a/0x2a0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
read to 0xffff8b8932f40090 of 8 bytes by task 14414 on cpu 1:
ext4_mark_iloc_dirty+0x716/0x1190
ext4_mark_inode_dirty+0xc9/0x360
ext4_convert_unwritten_extents+0x1bc/0x2a0
ext4_convert_unwritten_io_end_vec+0xc5/0x150
ext4_put_io_end+0x82/0x130
ext4_writepages+0xae7/0x16f0
do_writepages+0x64/0x120
__writeback_single_inode+0x7d/0x650
writeback_sb_inodes+0x3a4/0x860
__writeback_inodes_wb+0xc4/0x150
wb_writeback+0x43f/0x510
wb_workfn+0x3b2/0x8a0
process_one_work+0x39b/0x7e0
worker_thread+0x88/0x650
kthread+0x1d4/0x1f0
ret_from_fork+0x35/0x40
The plain read is outside of inode->i_data_sem critical section
which results in a data race. Fix it by adding READ_ONCE().
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Link: https://lore.kernel.org/r/1582556566-3909-1-git-send-email-hqjagain@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Without this, we get a couple of warnings when CONFIG_PM
is disabled:
drivers/gpu/drm/arm/display/komeda/komeda_drv.c:156:12: error: 'komeda_rt_pm_resume' defined but not used [-Werror=unused-function]
static int komeda_rt_pm_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/arm/display/komeda/komeda_drv.c:149:12: error: 'komeda_rt_pm_suspend' defined but not used [-Werror=unused-function]
static int komeda_rt_pm_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~
Fixes: efb4650885 ("drm/komeda: Add runtime_pm support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107215327.1579195-1-arnd@arndb.de
Teach gvt to use intel_gt directly as it currently assumes direct HW
access.
[Zhenyu: rebase, fix compiling]
Cc: Ding Zhuocheng <zhuocheng.ding@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200304032307.2983-3-zhenyuw@linux.intel.com
Al Viro recently reworked the way file system parameters are handled
Update super.c to work with it in linux-next 20200203.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make staging/exfat and fs/exfat mutually exclusive to select the one
between two same filesystem.
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add myself and Sungjong Seo as exfat maintainer.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the Kconfig and Makefile for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the implementation of nls operations for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the implementation of misc operations for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the implementation of exfat cache.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the implementation of bitmap operations for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the implementation of fat entry operations for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the implementation of file operations for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the implementation of directory operations for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the implementation of inode operations for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds the implementation of superblock operations for exfat.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds in-memory and on-disk structures and headers.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stop trying to escape out of the gvt layer to find the engine that we
initially setup for use with gvt. Record the engines during initialisation
and use them henceforth.
add/remove: 1/4 grow/shrink: 22/28 up/down: 341/-1410 (-1069)
[Zhenyu: rebase, fix nonpriv register check fault, fix gvt engine
thread run failure.]
Cc: Ding Zhuocheng <zhuocheng.ding@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200304032307.2983-2-zhenyuw@linux.intel.com
Remove extra chatty message for debugfs scan_nonprivbb which is used
to enable scan for non privileged batch on specific engine. Just write
target i915 engine mask instead.
Cc: Ding Zhuocheng <zhuocheng.ding@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200304032307.2983-1-zhenyuw@linux.intel.com
Commit c3b5a8430d ("drm/i915/gvt: Enable gfx virtualiztion for CFL")
added the support on CFL. The vgpu emulation hotplug support on CFL was
supposed to be included in that patch. Without the vgpu emulation
hotplug support, the dma-buf based display gives us a blur face.
So fix this issue by adding the vgpu emulation hotplug support on CFL.
Fixes: c3b5a8430d ("drm/i915/gvt: Enable gfx virtualiztion for CFL")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200227010041.32248-1-tina.zhang@intel.com
Jacob Keller says:
====================
PCI: Implement function to read Device Serial Number
Several drivers read the Device Serial Number from the PCIe extended
configuration space. Each of these drivers implements a similar approach to
finding the position and then extracting the 8 bytes of data.
Implement a new helper function, pci_get_dsn, which can be used to extract
this data into an 8 byte array.
Modify the bnxt_en, qedf, ice, ixgbe and nfp drivers to use this new
function.
The intent for this is to reduce duplicate code across the various drivers,
and make it easier to write future code that wants to read the DSN. In
particular the ice driver will be using the DSN as its serial number when
implementing the DEVLINK_CMD_INFO_GET.
The new implementation in v2 significantly simplifies some of the callers
which just want to print the value out in MSB order. By returning things as
a u64 in CPU Endian order, the "%016llX" printf format specifier can be used
to correctly format the value.
Per patch changes since v1
PCI: Introduce pci_get_dsn
* Update commit message based on feedback from Bjorn Helgaas
* Modify the function to return a u64 (zero on no capability)
* This new implementation ensures that the first dword is the lower 32
bits and the second dword is the upper 32 bits.
bnxt_en: Use pci_get_dsn()
* Use the u64 return value from pci_get_dsn()
* Copy it into the dsn[] array by using put_unaligned_le64
* Fix a pre-existing typo in the netdev_info error message
scsi: qedf: Use pci_get_dsn()
* Use the u64 return value from pci_get_dsn()
* simplify the snprintf to use "%016llX"
* remove the unused 'i' variable
ice: Use pci_get_dsn()
* Use the u64 return value from pci_get_dsn()
* simplify the snprintf to use "%016llX"
ixgbe: Use pci_get_dsn()
* Use the u64 return value from pci_get_dsn()
* simplify the snprintf to use "%016llX"
nfp: Use pci_get_dsn()
* Added in v2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the newly added pci_get_dsn() function for obtaining the 64-bit
Device Serial Number in the nfp6000_read_serial and
nfp_6000_get_interface functions.
pci_get_dsn() reports the Device Serial number as a u64 value created by
combining two pci_read_config_dword functions. The lower 16 bits
represent the device interface value, and the next 48 bits represent the
serial value. Use put_unaligned_be32 and put_unaligned_be16 to convert
the serial value portion into a Big Endian formatted serial u8 array.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().
The original code used a simple for-loop to read the bytes in order into
a buffer one byte at a time.
The pci_get_dsn() function returns the DSN as a u64, correctly ordering
the upper and lower 32 bit dwords. Simplify the display code by using
%016llX to display the u64 DSN.
This should have equivalent behavior on both Little and Big Endian
systems. The bus will have correctly ordered the dwords in the CPU
endian format, while pci_get_dsn() will correctly order the lower and
higher dwords into a u64.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().
The pci_get_dsn() function will perform two pci_read_config_dword calls
to read the lower and upper config dwords. It bitwise ORs them into
a u64 value. Instead of using put_unaligned_le32 to convert the value to
LE32 format, just use the %016llX printf specifier. This will print the
u64 correct, putting the most significant byte of the value first. Since
pci_get_dsn() correctly orders the two dwords into a u64, this should
produce equivalent results in less code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().
The original code used a for-loop that looped over each of the 8 bytes
and copied them into a temporary buffer. pci_get_dsn() uses two calls to
pci_read_config_dword, and correctly bitwise ORs them into a u64. Thus,
we can simplify the snprintf significantly using %016llX on a u64 value.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the open-coded implementation for reading the PCIe DSN with
pci_get_dsn().
Use of put_unaligned_le64 should be correct. pci_get_dsn() will perform
two pci_read_config_dword calls. The first dword will be placed in the
first 32 bits of the u64, while the second dword will be placed in the
upper 32 bits of the u64.
On Little Endian systems, the least significant byte comes first, which
will be the least significant byte of the first dword, followed by the
least significant byte of the second dword. Since the _le32 variations
do not perform byte swapping, we will correctly copy the dwords into the
dsn[] array in the same order as before.
On Big Endian systems, the most significant byte of the second dword
will come first. put_unaligned_le64 will perform a CPU_TO_LE64, which
will swap things correctly before copying. This should also end up with
the correct bytes in the dsn[] array.
While at it, fix a small typo in the netdev_info error message when the
DSN cannot be read.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several device drivers read their Device Serial Number from the PCIe
extended config space.
Introduce a new helper function, pci_get_dsn(). This function reads the
eight bytes of the DSN and returns them as a u64. If the capability does not
exist for the device, the function returns 0.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The emulated vbt doesn't tell its size correctly. According to the
intel_vbt_defs.h, vbt_header.vbt_size should the size of VBT (VBT Header,
BDB Header and data blocks), and bdb_header.bdb_size should be the size
of BDB (BDB Header and data blocks).
This patch fixes the issue and lets vbt provided by GVT-g pass the guest
i915's sanity test.
v2: refine the commit message. (Zhenyu)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200305131600.29640-1-tina.zhang@intel.com
We already have a function called page_offset(), and this macro
is unused, so just delete it.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Panel driver for the KD35T133 display from Elida, used for example
in the rk3326-based Odroid Go Advance handheld.
changes in v3:
- add missing return value assignment (Francesco)
- re-sort header includes (Sam)
changes in v2:
- rename dsi_generic_write_seq macro to dsi_dcs_write_seq to honor
the underlying mipi_dsi_dcs_write (Robin)
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200229151506.750242-3-heiko@sntech.de
When local NET_RX backlog is full due to traffic overrun,
peer veth tx_dropped counter increases. At that time, list
local veth stats, rx_dropped has double value of peer
tx_dropped, even bigger than transmit packets by peer.
In NET_RX softirq process, if any packet drop case happens,
it increases dev's rx_dropped counter and returns NET_RX_DROP.
At veth tx side, it records any error returned from peer netif_rx
into local dev tx_dropped counter.
In veth get stats process, it puts local dev rx_dropped and
peer dev tx_dropped into together as local rx_drpped value.
So that it shows double value of real dropped packets number in
this case.
This patch ignores peer tx_dropped when counting local rx_dropped,
since peer tx_dropped is duplicated to local rx_dropped at most cases.
Signed-off-by: Jiang Lidong <jianglidong3@jd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Building ARMv7 with Clang's integrated assembler leads to errors such
as:
arch/arm/crypto/ghash-ce-core.S:34:11: error: register name expected
t3l .req d16
^
Since no FPU has selected yet Clang considers d16 not a valid register.
Moving the FPU directive on-top allows Clang to parse the registers and
allows to successfully build this file with Clang's integrated assembler.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This updates to the newer register selection proved by HACL*, which
leads to a more compact instruction encoding, and saves around 100
cycles.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since in the software implementation of XTS-AES there is
no notion of sector every input length is processed the same way.
CAAM implementation has the notion of sector which causes different
results between the software implementation and the one in CAAM
for input lengths bigger than 512 bytes.
Increase sector size to maximum value on 16 bits.
Fixes: c6415a6016 ("crypto: caam - add support for acipher xts(aes)")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HW generates a Data Size error for chacha20 requests that are not
a multiple of 64B, since algorithm state (AS) does not have
the FINAL bit set.
Since updating req->iv (for chaining) is not required,
modify skcipher descriptors to set the FINAL bit for chacha20.
[Note that for skcipher decryption we know that ctx1_iv_off is 0,
which allows for an optimization by not checking algorithm type,
since append_dec_op1() sets FINAL bit for all algorithms except AES.]
Also drop the descriptor operations that save the IV.
However, in order to keep code logic simple, things like
S/G tables generation etc. are not touched.
Cc: <stable@vger.kernel.org> # v5.3+
Fixes: 334d37c9e2 ("crypto: caam - update IV using HW support")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Valentin Ciocoi Radulescu <valentin.ciocoi@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If UACCE=m and CRYPTO_DEV_HISI_QM=y, the following error
is seen while building qm.o:
drivers/crypto/hisilicon/qm.o: In function `hisi_qm_init':
(.text+0x23c6): undefined reference to `uacce_alloc'
(.text+0x2474): undefined reference to `uacce_remove'
(.text+0x286b): undefined reference to `uacce_remove'
drivers/crypto/hisilicon/qm.o: In function `hisi_qm_uninit':
(.text+0x2918): undefined reference to `uacce_remove'
make[1]: *** [vmlinux] Error 1
make: *** [autoksyms_recursive] Error 2
This patch fixes the config dependency for QM and ZIP.
reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Hongbo Yao <yaohongbo@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When uacce parent device module is removed, user app may
still keep the mmaped area, which can be accessed unsafely.
When rmmod, Parent device driver will call uacce_remove,
which unmap all remaining mapping from user space for safety.
VM_FAULT_SIGBUS is also reported to user space accordingly.
Suggested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the error handling in the XTS template's ->create() function by
taking advantage of crypto_drop_skcipher() now accepting (as a no-op) a
spawn that hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the error handling in pkcs1pad_create() by taking advantage of
crypto_grab_akcipher() now handling an ERR_PTR() name and by taking
advantage of crypto_drop_akcipher() now accepting (as a no-op) a spawn
that hasn't been grabbed yet.
While we're at it, also simplify the way the hash_name optional argument
is handled. We only need to check whether it's present in one place,
and we can just assign directly to ctx->digest_info.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the error handling in pcrypt_create_aead() by taking advantage
of crypto_grab_aead() now handling an ERR_PTR() name and by taking
advantage of crypto_drop_aead() now accepting (as a no-op) a spawn that
hasn't been grabbed yet.
This required also making padata_free_shell() accept a NULL argument.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the error handling in the LRW template's ->create() function by
taking advantage of crypto_drop_skcipher() now accepting (as a no-op) a
spawn that hasn't been grabbed yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
