The types of PLLs used for HDMI/DP on HSW are WRPLL/LCPLL accordingly,
so use these names to align better with the rest of WRPLL/LCPLL function
names elsewhere.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-9-imre.deak@intel.com
For clarity keep the SKL DPLL ref clock in a variable instead of
open-coding it. Store the value in kHZ units as done on other platforms.
This allows us in a later patch to keep track of the DPLL ref clock in a
more unified way across all platforms.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-8-imre.deak@intel.com
Move all the DPLL params->DPLL frequency conversion functions to
intel_dpll_mgr.c where the corresponding inverse conversions are.
The GEN11+ TBT PLL outputs multiple frequencies and for selecting the
one in use we need to check the DDI CLK mux. As part of the DDI clock
logic this selection is kept in intel_ddi.c.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-7-imre.deak@intel.com
For clarity add a new DPLL specific struct to the i915 device struct and
move all DPLL fields into it. Accordingly remove the dpll_ prefixes, as
the new struct already provides the required namespacing.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226203455.23032-4-imre.deak@intel.com
When a DT overlay has a node label that is not present in the live
devicetree symbols table, this error is printed:
OF: resolver: overlay phandle fixup failed: -22
create_overlay: Failed to create overlay (err=-22)
which does not help much in finding the node label that caused the problem
and fix the overlay source.
Add an error message with the name of the node label that caused the
error. The new output is:
OF: resolver: node label 'gpio9' not found in live devicetree symbols table
OF: resolver: overlay phandle fixup failed: -22
create_overlay: Failed to create overlay (err=-22)
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Randconfig testing found compile errors in drivers/of/unittest.c if
CONFIG_GPIOLIB is not set because CONFIG_OF_GPIO depends on
CONFIG_GPIOLIB. Make the gpio overlay test depend on CONFIG_OF_GPIO.
No code is modified, it is only moved to a different location and
protected with #ifdef CONFIG_OF_GPIO. An empty
of_unittest_overlay_gpio() is added in the #else.
Fixes: f4056e705b ("of: unittest: add overlay gpio test to catch gpio hog problem")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Rob Herring <robh@kernel.org>
There seems to be a bit of confusing redundancy in a way, how
plane data rate/min cdclk are calculated.
In fact both min cdclk, pixel rate and plane data rate are all
part of the same formula as per BSpec.
However currently we have intel_plane_data_rate, which is used
to calculate plane data rate and which is also used in bandwidth
calculations. However for calculating min_cdclk we have another
piece of code, doing almost same calculation, but a bit differently
and in a different place. However as both are actually part of same
formula, probably would be wise to use plane data rate calculations
as a basis anyway, thus avoiding code duplication and possible bugs
related to this.
Another thing is that I've noticed that during min_cdclk calculations
we account for plane scaling, while for plane data rate, we don't.
crtc->pixel_rate seems to account only for pipe ratio, however it is
clearly stated in BSpec that plane data rate also need to account
plane ratio as well.
So what this commit does is:
- Adds a plane ratio calculation to intel_plane_data_rate
- Removes redundant calculations from skl_plane_min_cdclk which is
used for gen9+ and now uses intel_plane_data_rate as a basis from
there as well.
v2: - Don't use 64 division if not needed(Ville Syrjälä)
- Now use intel_plane_pixel_rate as a basis for calculations both
at intel_plane_data_rate and skl_plane_min_cdclk(Ville Syrjälä)
v3: - Again fix the division macro
- Fix plane_pixel_rate to pixel_rate at intel_plane_pixel_rate
callsites
v4: - Renamed skl_plane_ratio function back(Ville Syrjälä)
v5: - Don't precalculate plane pixel rate for invisible plane,
check for visibility first, as in invisible case it will
have dst_w and dst_h equal to zero, causing divide error.
v6: - Removed useless warn in intel_plane_pixel_rate(Ville Syrjälä)
- Fixed alignment in intel_plane_data_rate(Ville Syrjälä)
- Changed pixel_rate type to be unsigned int in
skl_plane_min_cdclk(Ville Syrjälä)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200227150935.2107-1-stanislav.lisovskiy@intel.com
The commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS dependency")
accidentally dropped the DEBUG FS support in bcm2835_defconfig. So
restore the config as before the commit.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS dependency")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Since we ony support the TTB1 quirk for AArch64 contexts, and
consequently only for 64-bit builds, the sign-extension aspect of the
"are all bits above IAS consistent?" check should implicitly only apply
to 64-bit IOVAs. Change the type of the cast to ensure that 32-bit longs
don't inadvertently get sign-extended, and thus considered invalid, if
they happen to be above 2GB in the TTB0 region.
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Acked-by: Will Deacon <will@kernel.org>
Fixes: db6903010a ("iommu/io-pgtable-arm: Prepare for TTBR1 usage")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
intel_iommu_iova_to_phys() has a bug when it translates an IOVA for a huge
page onto its corresponding physical address. This commit fixes the bug by
accomodating the level of page entry for the IOVA and adds IOVA's lower
address to the physical address.
Cc: <stable@vger.kernel.org>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Yonghyun Hwang <yonghyun@google.com>
Fixes: 3871794642 ("VT-d: Changes to support KVM")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In svm, exit_code for MSR writes is not EXIT_REASON_MSR_WRITE which
belongs to vmx.
According to amd manual, SVM_EXIT_MSR(7ch) is the exit_code of VMEXIT_MSR
due to RDMSR or WRMSR access to protected MSR. Additionally, the processor
indicates in the VMCB's EXITINFO1 whether a RDMSR(EXITINFO1=0) or
WRMSR(EXITINFO1=1) was intercepted.
Signed-off-by: Haiwei Li <lihaiwei@tencent.com>
Fixes: 1e9e2622a1 ("KVM: VMX: FIXED+PHYSICAL mode single target IPI fastpath", 2019-11-21)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Building cpupower with -fno-common in CFLAGS results in errors due to
multiple definitions of the 'cpu_count' and 'start_time' variables.
./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
multiple definition of `cpu_count';
./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
first defined here
...
./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22:
multiple definition of `start_time';
./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85:
first defined here
The -fno-common option will be enabled by default in GCC 10.
Bug: https://bugs.gentoo.org/707462
Signed-off-by: Mike Gilbert <floppym@gentoo.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221160005.GA13552@embeddedor
It's needed to support the onboard video on my Spectre-free
Atom S1260 server board.
Signed-off-by: Rich Felker <dalias@libc.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
[b.zolnierkie: patch description fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200125195506.GA16638@brightrain.aerifal.cx
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/video/fbdev/aty/mach64_gx.c: In function ‘aty_var_to_pll_8398’:
drivers/video/fbdev/aty/mach64_gx.c:621:36: warning: variable
‘mach64RefFreq’ set but not used [-Wunused-but-set-variable]
It is never used, and so can be removed.
Signed-off-by: yu kuai <yukuai3@huawei.com>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: yi.zhang <yi.zhang@huawei.com>
[b.zolnierkie: minor patch summary fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120063327.43548-1-yukuai3@huawei.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/video/fbdev/kyro/STG4000OverlayDevice.c: In function
‘SetOverlayViewPort’:
drivers/video/fbdev/kyro/STG4000OverlayDevice.c:334:19: warning:
variable ‘ulScaleRight’ set but not used [-Wunused-but-set-variable]
It is never used, and so can be removed.
Signed-off-by: yu kuai <yukuai3@huawei.com>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: yi.zhang <yi.zhang@huawei.com>
[b.zolnierkie: minor patch summary fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200119121945.12517-1-yukuai3@huawei.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/video/fbdev/aty/radeon_base.c: In function
‘radeonfb_set_par’:
drivers/video/fbdev/aty/radeon_base.c:1660:32: warning:
variable ‘bytpp’ set but not used [-Wunused-but-set-variable]
It is never used, and so can be removed.
Signed-off-by: yu kuai <yukuai3@huawei.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: yi.zhang <yi.zhang@huawei.com>
[b.zolnierkie: minor patch summary fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200119121730.10701-5-yukuai3@huawei.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/video/fbdev/aty/radeon_base.c: In function
‘radeonfb_set_par’:
drivers/video/fbdev/aty/radeon_base.c:1653:48: warning: variable
‘cSync’ set but not used [-Wunused-but-set-variable]
It is never used, and so can be removed.
Signed-off-by: yu kuai <yukuai3@huawei.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: yi.zhang <yi.zhang@huawei.com>
[b.zolnierkie: patch summary fixups]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200119121730.10701-4-yukuai3@huawei.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/video/fbdev/aty/radeon_base.c: In function
‘radeonfb_set_par’:
drivers/video/fbdev/aty/radeon_base.c:1653:38: warning: variable
‘vSyncPol’ set but not used [-Wunused-but-set-variable]
It is never used, and so can be removed.
Signed-off-by: yu kuai <yukuai3@huawei.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: yi.zhang <yi.zhang@huawei.com>
[b.zolnierkie: minor patch summary fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200119121730.10701-3-yukuai3@huawei.com
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/video/fbdev/aty/radeon_base.c: In function
‘radeonfb_set_par’:
drivers/video/fbdev/aty/radeon_base.c:1653:6: warning: variable
‘hSyncPol’ set but not used [-Wunused-but-set-variable]
It is never used, and so can be removed.
Signed-off-by: yu kuai <yukuai3@huawei.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: yi.zhang <yi.zhang@huawei.com>
[b.zolnierkie: minor patch summary fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200119121730.10701-2-yukuai3@huawei.com
The message of max device speed setting is shown when
an error in spi_setup() occurs.
Instead, it should be shown when the setup call succeeds.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Link: https://lore.kernel.org/r/20200229161841.89144-3-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The debug message in spidev_message() can show wrong xfer speed.
It happens if the initial (came from DT) and set with ioctl call spidev
speeds are different (spidev->speed_hz != spi->max_speed_hz) and one
sends a message with ioctl call and the field of speed is uninitialized
(u_tmp->speed_hz == 0).
In this case the kernel shows the spi->max_speed_hz value instead of
correct spidev->speed_hz.
...
set the max speed with an ioctl call:
[ 1227.702714] spidev spi0.0: setup mode 0, 32 bits/w, 20000000 Hz max --> 0
(real speed sets to 20000000Hz)
send a message with an ioctl call:
[ 1227.731801] spidev spi0.0: xfer len 4096 tx 32bits 0 usec 10000000Hz
(debug message shows 10000000Hz that is the original max speed of this
spidev came from DT)
...
Fix the data source for the debug message.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Link: https://lore.kernel.org/r/20200229161841.89144-2-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add metadata capture/output and v4l-touch support in vivid
documentation.
Signed-off-by: Vandana BN <bnvandana@gmail.com>
[hverkuil-cisco@xs4all.nl: fixed some typos, made some small tweaks of the text]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Relaxed ordering is not supported in UMR so we are disabling UMR usage
when user passes relaxed ordering access flag.
Enable using UMR when user requested relaxed ordering but there are no
relaxed ordering capabilities.
This will prevent user from unnecessarily registering a new mkey.
Fixes: d6de0bb185 ("RDMA/mlx5: Set relaxed ordering when requested")
Link: https://lore.kernel.org/r/20200227113834.94233-1-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c: In function '__send_message':
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:101:10: warning:
variable 'idx' set but not used [-Wunused-but-set-variable]
drivers/infiniband/hw/bnxt_re/qplib_rcfw.c:101:6: warning:
variable 'pg' set but not used [-Wunused-but-set-variable]
commit cee0c7bba4 ("RDMA/bnxt_re: Refactor command queue management
code") involved this, but not used.
Link: https://lore.kernel.org/r/20200227064900.92255-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_create_gsi_qp':
drivers/infiniband/hw/bnxt_re/ib_verbs.c:1283:30: warning:
variable 'dev_attr' set but not used [-Wunused-but-set-variable]
commit 8dae419f9e ("RDMA/bnxt_re: Refactor queue pair creation code")
involved this, but not used, so remove it.
Link: https://lore.kernel.org/r/20200227064542.91205-1-yuehaibing@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/bnxt_re/qplib_res.c: In function '__alloc_pbl':
drivers/infiniband/hw/bnxt_re/qplib_res.c:109:13: warning:
variable 'pg_size' set but not used [-Wunused-but-set-variable]
commit 0c4dcd6028 ("RDMA/bnxt_re: Refactor hardware queue memory
allocation") involved this, but not used, so remove it.
Link: https://lore.kernel.org/r/20200227064209.87893-1-yuehaibing@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Using the new unregister APIs provided by the core. Provide the
dealloc_driver hook for the core to callback at the time of device
un-registration.
bnxt_re VF resources are created by the corresponding PF driver. During
ib_unregister_driver, PF might get removed before VF and this could cause
failure when VFs are removed. Driver is explicitly queuing the removal of
VF devices before calling ib_unregister_driver.
Link: https://lore.kernel.org/r/1582731932-26574-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- bnxt_re_ib_reg() handles two main functionalities - initializing the
device and registering with the IB stack. Split it into 2 functions
i.e. bnxt_re_dev_init() and bnxt_re_ib_init() to account for the same
thereby improve modularity. Do the same for
bnxt_re_ib_unreg()i.e. split into two functions - bnxt_re_dev_uninit()
and bnxt_re_ib_uninit().
- Simplify the code by combining the different steps to add and remove
the device into two functions.
- Report correct netdev link state during device register
Link: https://lore.kernel.org/r/1582731932-26574-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The packet handling function, specifically the iteration of the qp list
for mad packet processing misses locking RCU before running through the
list. Not only is this incorrect, but the list_for_each_entry_rcu() call
can not be called with a conditional check for lock dependency. Remedy
this by invoking the rcu lock and unlock around the critical section.
This brings MAD packet processing in line with what is done for non-MAD
packets.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20200225195445.140896.41873.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the dma channel request error code is EPROBE_DEFER there is no need to
print error message.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The purpose of commit 0fd85869c2 ("spi/bcm63xx-hsspi: keep pll clk enabled")
was to keep the pll clk enabled through the lifetime of the device.
In order to do that, some 'clk_prepare_enable()'/'clk_disable_unprepare()'
calls have been added in the error handling path of the probe function, in
the remove function and in the suspend and resume functions.
However, a 'clk_disable_unprepare()' call has been unfortunately left in
the probe function. So the commit seems to be more or less a no-op.
Axe it now, so that the pll clk is left enabled through the lifetime of
the device, as described in the commit.
Fixes: 0fd85869c2 ("spi/bcm63xx-hsspi: keep pll clk enabled")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://lore.kernel.org/r/20200228213838.7124-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
