The OMAP4 DSP hwmod is used in DT, but the DT node is not
probing any real driver. The DSP device-tree node shall be
updated as per the new OMAP remoteproc bindings with the
underneath MMU device relying on the ti-sysc infrastructure.
Drop the legacy hwmod data for the DSP device along with the
custom ti,hwmods property. They have to be dropped together
since the early platform data init code is based on the custom
ti,hwmods property.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The PRUSS hwmod is currently not used in DT, and the new DTS
nodes shall be added using the ti-sysc infrastructure and the
omap-prm reset driver. Drop the legacy hwmod data for the
PRUSS module on both the AM33xx and AM437x family of SoCs.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add idle_states table for CPU on am437x. Currently just add C1 state
which gates the MPU clock domain.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add idle_states table for CPU on am335x. Currently just add C1 state
which gates the MPU clock domain.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add CONFIG_ARM_CPUIDLE and supporting CONFIG_DT_IDLE_STATES as am335x
and am437x will make use of these drivers.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Some cpuidle C-states supported on am335x and am437x, like C1 on am335x,
require the use of the wkup_m3_ipc driver, and all C-states beyond C0 on
both platforms require the use of the SRAM sleep code.
Pass am33xx_do_sram_idle as the idle function to the platform pm core to
be used by the cpuidle-arm driver when entering cpuidle states.
am33xx_do_sram_idle will detect when the wkup_m3 is needed and ping it
if necessary before calling the final cpu_suspend op which will execute
the SRAM code to put the cpu into idle.
Finally, use the begin_suspend and finish_suspend platform ops to be
called at the beginning and end of suspend path to allow use of
cpu_idle_poll_ctrl.
This prevents races between cpuidle and suspend paths trying to
communicate with the wkup_m3, as during suspend we only want it
configured for entry to suspend.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
In order for am335x and am437x to properly enter deeper c-states in
cpuidle they must always call into the sleep33/43xx suspend code and
also sometimes invoke the wkup_m3_ipc driver. These are both controlled
by the pm33xx module so we must provide a method for the platform code
to call back into the module when it is available as the core cpuidle
ops that are invoked by the cpuidle-arm driver must remain as built in.
Extend the init platform op to take an idle function as an argument so
that we can use this to call into the pm33xx module for c-states that
need it. Also add a deinit op so we can unregister this idle function
from the PM core when the pm33xx module gets unloaded.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
am335x and am437x can now make use of the generic cpuidle-arm driver.
This requires that we define init and suspend ops to be passed set as
the cpuidle ops for the SoC. These ops are invoked directly at the last
stage of the cpuidle-arm driver in order to allow low level platform
code to run and bring the CPU the rest of the way into it's desired idle
state. It is required that the CPUIDLE_METHOD_OF_DECLARE be called from
code that is built in so define these ops in pm33xx-core where the
always built-in portion of the PM code for these SoCs lives.
Additionally, although an soc_suspend function is already exposed by the
pm33xx platform code, it contains additional operations needed for full
SoC suspend beyond what is needed for a relatively simple CPU suspend
needed during cpuidle. To get around this introduce cpu_suspend ops to
be used by the am335x and am437x PM driver for the last stage of cpuidle
path.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The radix tree doesn't use alignment, so the argument was ignored.
The maple tree needs its nodes to be aligned, so we need to pay attention
to the alignment argument. Also change the types of 'size' and 'align'
to unsigned int to match commit f4957d5bd0.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Function sdei_event_find() is always called in sdei_event_create(), but
it is already called in sdei_event_register(). This code is trying to
avoid a double-create of the same event, which can't happen as we still
hold the sdei_events_lock. We can remove this needless sdei_event_find()
call.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
[expanded commit message]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
SDEI has private events that need registering and enabling on each CPU.
CPUs can come and go while we are trying to do this. SDEI tries to avoid
these problems by setting the reregister flag before the register call,
so any CPUs that come online register the event too. Sticking plaster
like this doesn't work, as if the register call fails, a CPU that
subsequently comes online will register the event before reregister
is cleared.
Take cpus_read_lock() around the register and enable calls. We don't
want surprise CPUs to do the wrong thing if they race with these calls
failing.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We call sdei_reregister_event() with sdei_list_lock held, if the register
fails we call sdei_event_destroy() which also acquires sdei_list_lock
thus creating A-A deadlock.
Add '_llocked' to sdei_reregister_event(), to indicate the list lock
is held, and add a _llocked variant of sdei_event_destroy().
Fixes: da35182724 ("firmware: arm_sdei: Add support for CPU and system power states")
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
[expanded subject, added wrappers instead of duplicating contents]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
SDEI has private events that must be registered on each CPU. When
CPUs come and go they must re-register and re-enable their private
events. Each event has flags to indicate whether this should happen
to protect against an event being registered on a CPU coming online,
while all the others are unregistering the event.
These flags are protected by the sdei_list_lock spinlock, because
the cpuhp callbacks can't take the mutex.
Hibernate needs to unregister all events, but keep the in-memory
re-register and re-enable as they are. sdei_unregister_shared()
takes the spinlock to walk the list, then calls _sdei_event_unregister()
on each shared event. _sdei_event_unregister() tries to take the
same spinlock to update re-register and re-enable. This doesn't go
so well.
Push the re-register and re-enable updates out to their callers.
sdei_unregister_shared() doesn't want these values updated, so
doesn't need to do anything.
This also fixes shared events getting lost over hibernate as this
path made them look unregistered.
Fixes: da35182724 ("firmware: arm_sdei: Add support for CPU and system power states")
Reported-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ 3934.173244] ======================================================
[ 3934.179572] WARNING: possible circular locking dependency detected
[ 3934.185884] 5.4.21-xfstests #1 Not tainted
[ 3934.190151] ------------------------------------------------------
[ 3934.196673] dmsetup/8897 is trying to acquire lock:
[ 3934.201688] ffffffffbce82b18 (shrinker_rwsem){++++}, at: unregister_shrinker+0x22/0x80
[ 3934.210268]
but task is already holding lock:
[ 3934.216489] ffff92a10cc5e1d0 (&pmd->root_lock){++++}, at: dm_pool_metadata_close+0xba/0x120
[ 3934.225083]
which lock already depends on the new lock.
[ 3934.564165] Chain exists of:
shrinker_rwsem --> &journal->j_checkpoint_mutex --> &pmd->root_lock
For a more detailed lockdep report, please see:
https://lore.kernel.org/r/20200220234519.GA620489@mit.edu
We shouldn't need to hold the lock while are just tearing down and
freeing the whole metadata pool structure.
Fixes: 44d8ebf436 ("dm thin metadata: use pool locking at end of dm_pool_metadata_close")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The crash can be reproduced by running the lvm2 testsuite test
lvconvert-thin-external-cache.sh for several minutes, e.g.:
while :; do make check T=shell/lvconvert-thin-external-cache.sh; done
The crash happens in this call chain:
do_waker -> policy_tick -> smq_tick -> end_hotspot_period -> clear_bitset
-> memset -> __memset -- which accesses an invalid pointer in the vmalloc
area.
The work entry on the workqueue is executed even after the bitmap was
freed. The problem is that cancel_delayed_work doesn't wait for the
running work item to finish, so the work item can continue running and
re-submitting itself even after cache_postsuspend. In order to make sure
that the work item won't be running, we must use cancel_delayed_work_sync.
Also, change flush_workqueue to drain_workqueue, so that if some work item
submits itself or another work item, we are properly waiting for both of
them.
Fixes: c6b4fcbad0 ("dm: add cache target")
Cc: stable@vger.kernel.org # v3.9
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This register was placed in the middle of the PP_STATUS definition
instead of together with the PP_CONTROL where it should. Since it's not
used and there are no current plans to use it, just remove the
definition.
v2: remove the define rather than moving it.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308232321.30168-1-lucas.demarchi@intel.com
Completions need to consumed in the same order the controller submitted
them, otherwise future completion entries may overwrite ones we haven't
handled yet. Hold the nvme queue's poll lock while completing new CQEs to
prevent another thread from freeing command tags for reuse out-of-order.
Fixes: dabcefab45 ("nvme: provide optimized poll function for separate poll queues")
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In Aug 2018 NeilBrown noticed
commit 1f4aace60b ("fs/seq_file.c: simplify seq_file iteration code and interface")
"Some ->next functions do not increment *pos when they return NULL...
Note that such ->next functions are buggy and should be fixed.
A simple demonstration is
dd if=/proc/swaps bs=1000 skip=1
Choose any block size larger than the size of /proc/swaps. This will
always show the whole last line of /proc/swaps"
/proc/swaps output was fixed recently, however there are lot of other
affected files, and one of them is related to pstore subsystem.
If .next function does not change position index, following .show function
will repeat output related to current position index.
There are at least 2 related problems:
- read after lseek beyond end of file, described above by NeilBrown
"dd if=<AFFECTED_FILE> bs=1000 skip=1" will generate whole last list
- read after lseek on in middle of last line will output expected rest of
last line but then repeat whole last line once again.
If .show() function generates multy-line output (like
pstore_ftrace_seq_show() does ?) following bash script cycles endlessly
$ q=;while read -r r;do echo "$((++q)) $r";done < AFFECTED_FILE
Unfortunately I'm not familiar enough to pstore subsystem and was unable
to find affected pstore-related file on my test node.
If .next function does not change position index, following .show function
will repeat output related to current position index.
Cc: stable@vger.kernel.org
Fixes: 1f4aace60b ("fs/seq_file.c: simplify seq_file iteration code ...")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: https://lore.kernel.org/r/4e49830d-4c88-0171-ee24-1ee540028dad@virtuozzo.com
[kees: with robustness tweak from Joel Fernandes <joelaf@google.com>]
Signed-off-by: Kees Cook <keescook@chromium.org>
After transitioning to YAML DT schema we don't need this old-style
document.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to use dynamic video codec assignment add a new sdm845-v2
DT compatible and new venus_resource structure to cover the binding
where all pmdomains and clocks are under the venus_core control.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Handle 10bit video streams in the decoder by using dithering, i.e
the decoder output buffers will be in 8bit format.
The runtime handling is implemented by sending v4l2 event to
userspace application, then the application should stop the
streaming on capture queue and initiate format negotiation, and
start streaming again.
Signed-off-by: Aniket Masule <amasule@codeaurora.org>
Co-developed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Presently the core (vcodec pipelines) assignment is static. Here we
introduce dynamic load balancing across the cores depending on the
current session load. The load on earch core is calculated and core
with minimum load is assigned to given instance. This will be
applicable on Venus v4 with more than one vcodec cores.
Signed-off-by: Aniket Masule <amasule@codeaurora.org>
Co-developed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Redesign core (vcodec) clock control to give the venus core more
freedom to control them in order to make possible to use core
selection feature on Venus IP v4.
Move all clock and pmdomain functions in separate file and abstract
power control with common operations per Venus IP version.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
handle_error() currently calls snprintf() a couple of times in
succession to output the message for a CE/UE, therefore overwriting each
part of the message which was formatted with the previous snprintf()
call. As a result, only the part of the message from the last snprintf()
call will be printed.
The simplest and most effective way to fix this problem is to combine
the whole string into one which to supply to a single snprintf() call.
[ bp: Massage. ]
Fixes: b500b4a029 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: Manish Narani <manish.narani@xilinx.com>
Link: https://lkml.kernel.org/r/1582792452-32575-1-git-send-email-sherry.sun@nxp.com
Those two properties are not implemented for Venus v4 (sdm845),
thus don't set them to firmware.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Replace explicit use of members of struct resource by %pR to print
the resource.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some older MSM8916 Venus firmware versions also seem to indicate
support for encoding HEVC, even though they really can't.
This will lead to errors later because hfi_session_init() fails
in this case.
HEVC is already ignored for "dec_codecs", so add the same for
"enc_codecs" to make these old firmware versions work correctly.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
On these error paths the "sess" variable isn't freed. It's a refcounted
pointer so we need to call kref_put(). I re-arranged the code a bit so
the error case is always handled before the success case and the error
paths are indented two tabs.
Fixes: 757cc3e9ff ("tee: add AMD-TEE driver")
Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
For testing mainline, the kvm.sh rcutorture script is the preferred
approach to testing. This commit therefore adds it to the torture.txt
documentation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
listRCU.rst document gives an example with 'ipc_lock()', but the
function has dropped off by commit 82061c57ce ("ipc: drop
ipc_lock()"). Because the main logic of 'ipc_lock()' has melded in
'shm_lock()' by the commit, this commit updates the document to use
'shm_lock()' instead.
Reviewed-by: Madhuparna Bhowmik <madhuparnabhowmik04@gmail.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit ccc9971e21 ("docs: rcu: convert some articles from html to
ReST") has converted a few of html RCU docs into ReST files, but a few
of html tags which not supported on rst is remaining. This commit
converts those to ReST appropriate alternatives.
Reviewed-by: Madhuparna Bhowmik <madhuparnabhowmik04@gmail.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It turned out that fake numa support is rather useless on s390, since
there are no scenarios where there is any performance or other benefit
when used.
However it does provide maintenance cost and breaks from time to time.
Therefore remove it.
CONFIG_NUMA is still supported with a very small backend and only one
node. This way userspace applications which require NUMA interfaces
continue to work.
Note that NODES_SHIFT is set to 1 (= 2 nodes) instead of 0 (= 1 node),
since there is quite a bit of kernel code which assumes that more than
one node is possible if CONFIG_NUMA is enabled.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
